am foundation pipes ol - oriental steel pipe
TRANSCRIPT
FOUNDATION PIPES
pg|01
Foundation Pipes
● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Outer Diameter Wall thickness (mm and inch)
24283236404448525660646872768084889296
100104106110114118
610711813914101611181219132114221524162617271829193020322134223523372438254026422692279428962997
inch
inch
mm
0.24
6.0
0.28
7.0
0.31
8.0
0.35
9.0
0.39
10.0
0.43
11.0
0.47
12.0
0.51
13.0
0.55
14.0
0.59
15.0
0.63
16.0
0.67
17.0
0.71
18.0
0.75
19.0
0.79
20.0
0.83
21.0
0.87
22.0
0.91
23.0
0.94
24.0
0.98
25.0
www.orientalsteelpipe.com
● ● ● ● ● ● ● ● ● ●
● ●
Driven by ambition to answer all types of foundations requirements, a modern and automated spiral pipe plant has been built with water front access in the Port Klang area.
Located at a strategic position, OSP local processing center comprises the following facilities in the same area:• Fully automated spiral welded pipe machine• Coating and sand blasting facilities• Storage area• Crane handling long full-length pipes and waterfront facilities
All these facilities provide flexibility needed offering tailor-made and cost competitive solution according to our customer’s specific requirements in foundation.
After production, every single pipe is subjected to strict and rigorous quality controls ensuring all finished goods are reaching international standards and references.
Complying with our mission statement, OSP pipe offer has been enriched by extra added value services than existing ones:• Plies shoes fabrication and splicing• Attachments and clutches welding• Sand blasting and coating• Third party inspection and quality assurance services
Oriental Sheet Piling comprehensive and cost effective pipe solutions are significantly decreasing time of construction programs and as a consequence lowering overall project costing for the benefit of our customers.
Sizes available for production, all intermediate dimensions are also available upon request.
+7.50
+4.20
+6.00
+7.00
+15.00
+20.50
+23.00
+25.50+26.00
+2.10
-1.50
-16.70
-20.00
-24.80
-30.50
-31.50
Ø 1219.2 mmt = 16 mm
35.00 m2.50
Design dredge level
Tubular pile
L = 10.20 m / 11.20 mPU 12
Traction pileHTM 600/136
L = 41.00 m
Crane rail Crane rail
Backfilled soil
Clay
Clay
Sand / Gravel
Sand with clay
L HZ = 33,50 mL AZ = 27,45 m
HZ 975B - 24 / AZ 19
Characteristic - EN 10219
pg|02www.orientalsteelpipe.com
Size(D) mm
Thickness(T) mm
Cross SectionArea (Ac) cm²
SuperficialArea (Ac) m²/m
Second Momentof Area (I) cm4
Radius ofGyration (I) cm
Elastic SectionModulus (W) cm3
Mass(M) kg/m
711101214
173207241
220264307
135301160991186235
24.824.724.6
380645295239
2.232.232.23
762101214
185222258
236283329
167028198855230168
26.626.526.5
438452196041
2.392.392.39
813101214
198237276
252302351
203364242235280519
28.428.328.3
500359596901
2.552.552.55
914101214
223267311
284340396
290147345890400886
32.031.931.8
634975698772
2.872.872.87
1016121416
297346395
378441503
476985553192628479
35.535.435.4
93891089012372
3.193.193.19
1168121416
342398455
436508579
728050845024960774
40.940.840.7
124671447016452
3.673.673.67
1219141618
416475533
530605679
96207210940911224782
42.642.542.5
157851795120095
3.833.833.83
1300141618
444507569
566645725
116939813302781489643
45.545.545.3
179912046622918
4.084.084.08
1400161820
546613681
696782867
166588918660802064516
48.948.948.8
237982665829493
4.404.404.40
1500161820
586658730
746838930
205367723011302546562
52.552.452.3
273823068233954
4.714.714.71
1600182022
702779856
895993
1091
279903330983523395377
55.955.955.8
349883872942442
5.035.035.03
1700182022
747829910
95110561160
336403237245974082565
59.559.459.3
395774381948030
5.345.345.34
1800182022
791878965
100811181229
400036744300104856734
63.062.962.9
444494922253964
5.655.655.65
1900202224
92710191110
118112981414
521930457230686223586
66.566.466.3
549406024365511
5.975.975.97
2000202224
97710731170
124413671490
609719066867517272706
70.069.969.9
609726686872727
6.286.286.28
2100202224
102611271229
130714361565
706838277529668433565
73.573.573.4
673187383880320
6.606.606.60
2200212325
112812351341
143815731708
85327939319905
10102644
77.077.076.9
775718472691842
6.916.916.91
2300212325
118012921403
150416451787
97622301066402411561030
80.680.580.4
8488992731
100531
7.237.237.23
2400212325
123213481464
157017181865
111044321213154013153425
84.184.084.0
92537101096109612
7.547.547.54
2500212325
128414051526
163517901944
125643471372787114885719
87.687.687.5
100515109823119086
7.857.857.85
2600212325
133614621588
170118622022
141469231545843716763802
91.291.191.0
108822118911128952
8.178.178.17
2700212325
138715181649
176719342101
158571091732865618793566
94.794.694.6
117460128360139212
8.488.488.48
2800212325
143915751711
183320072179
176998511934395020980900
98.398.298.1
126428138171149864
8.808.808.80
2900212325
149116321773
189920792258
196800992150973523331694
101.8101.7101.7
135725148343160908
9.119.119.11
3000212325
154316891834
196521512337
218028002383143225851841
105.3105.3105.2
145352158876172346
9.429.429.42
150166181
8669898531110159
217121712171
122138153
154172189
112751129852146695
227322732273
128145162
158177195
144510167991191157
227422742274
133151170
182202221
214016244795275202
227622762276
157177196
212234256
378870428149476933
267926792679
190211233
279305330
93201110298271126894
306030603060
259285310
290316343
124333913751321506029
326032603260
271297324
326354382
177748919478822117233
346034603460
309337365
350379408
234582325608812774744
366036603660
333362391
363393424
318617934799983772384
396039603960
347378409
380413446
490038653552365808242
446044604460
367399432
pg|03www.orientalsteelpipe.com
Combined Walls - Pipe Pile Combi-Wall
Effective weight foundation solutions to take high lateral force and or vertical bearing capacity. Soil arching effect allows effective solutions with this steel combination:• Primary pipe element to take main lateral force from soil and water. The primary element will also support vertical load as part of foundation and reduce cost.• The shorter and lighter secondary sheet piles will only need to stabilize local soil mass between primary piles and load transfer. This will reduce overall system weight.• Optimized solutions can be achieved by various combinations of pipes and sheet piles to meet specific requirement of every retaining wall.
Secondary piles with AZ sheet piling further enhance functional performance of pipe Combi-wall:• Better load displacement behaviour to control movement of wall compared to U shape sheet piling. • AZ sheet piles are flexible intermediate sheet to adjust to driving tolerance without any problem such as declutching leakage, etc.• Proven Larseen type of interlock for load transfer.• Proven from research data, AZ piles connected to pipe piles with approved connector can take high loads i.e. differential water head up15m.
The below tables demonstrate partly possibility of pipe piles combi-wall with various pipes diameter, thickness and intermediate sheet piles. Please contact our Technical Department for other combination to meet specific project needs.
Diametermm
Thicknessmm
Widthmm
M60%kg/m²
M100%kg/m²
Icm4/m
Wcm³/m
711101214
243927723099
813101214
277431943609
914101214
316236764183
1016121416
421348195417
1219141618
621670257825
1600182022
116501287314086
1800182022
138151527916734
2000202224
177751947921172
2200212325
213262328125225
2500212325
254892784030179
3000212325
326693570238722
Diameter : Outside diameter of pipe (mm)Thickness : Wall thickness of pipe (mm)M60% : Mass of combined wall with a length of the intermediate sheet piles equal to 60% of the length of the pipes (kg/m²)M100% : Mass of combined wall with a length of the intermediate sheet piles equal to the length of the pipes (kg/m²)I : Moment of Inertia of combined wall (cm4/m) W : Section modulus of combined wall (cm³/m)
Where,I prim : Moment of inertia of pipe, cm4
I sec : Moment of inertia of sheets piles, cm4
b : System width, mD : pipe diameter : Max steel stress due to bending moment, N/mm²M : Design bending moment, kNm/m
I = I prim + I secb
= MW
W = I0.5 X D
Pipe Dimensions Intermediate Sheet Piles = AZ18 - 700
Jetty facilities and Long Length PipeOSP has an excellent factory location with own our very own private jetty for barge based shipments in South East Asia. This allows easy access and logistical support for long distance shipments. In addition, OSP also has the ability to produce long-length pipe up to 120m without requiring any additional splicing at the job site. Other benefits include:• Does not require splicing for easier management. (Safety and Quality at site)• Does not require additional land transport to deliver pipes. • Cost effective- by eliminating the cost splicing. • Reduce processing timeline.
pg|04www.orientalsteelpipe.com
Corrosion Protection - Coating
IS0 8501-1 1988BS7079:A1 1988
Swedish StandardSIS055900
1967
Steel StructurePainting Council
1982Japan Shipbuilding
Research AssociationRequirement
White Metal
Near White
Commercial Blast
Brush-off Blast
SA 3
SA 2.5
SA 2
SA 1
SA 3
SA 2.5
SA 2
SA 1
SP5
SP10
SP6
SP7
Sh(d) 3
Sh(d) 2
Sh(d) 1
-
pg|05
Steel Grade
www.orientalsteelpipe.com
Steel GradeMin Yield Strength
(16<T≤40mm) N/mm²
Min Elongation(T≤40mm)
%
Min Yield Strength(T≤16mm)
N/mm²
EN 10219-1
S 235 JRH
S 275 J0H
S 355 J0H
S 420 MH
S 460 MH
235
275
355
420
460
225
265
345
400
440
340 - 470
410 - 560
490 - 630
500 - 660
530 - 720
24
20
20
19
17
Outside diameter (D)
Wall thickness (T)
Straightness
Out of roundness
Mass
Maximum weld bead height
API 5LEN 10219 - 2Tolerances
±1%, min ±0.5mm and max ±10mm
±10%, max ±2mm (D > 406mm)
0.20% of total length
±2%
±6%
3.5mm (T ≤14.2mm)
(submerged weld) 4.8mm (T ≤14.2mm)
+6.4mm / -3.2mm (D > 914mm)
+19.5% / -8% (D > 508mm)
0.20% of total length
±1%
+10% / - 3.5%
3.2mm (T ≤12.7mm)
4.8mm (T ≤12.7mm)
Min Ultimate Tensile Strength
(3<T≤40mm) N/mm²
API 5L, PSL 1
Steel Grade Min Yield StrengthN/mm²
Min Elongation%
Min Ultimate Tensile Strength N/mm²
B
X 42
X 46
X 52
X 56
X 60
X 65
X 70
241
290
317
359
386
414
448
483
414
414
434
455
490
517
531
565
23
23
22
21
19
19
18
17
pg|06www.orientalsteelpipe.com
Certificates
OHSAS 18001:2007Occupational Health and Safety Assessment Series Factory Production Control (FPC) under BC 1:2012
ISO 9001: 2015 Quality Management System ISO 14001: 2015 Environmental Management System
OCTOBER 2018
Disclaimer:
The information in this brochure has been compiled with utmost care. Nevertheless, it is for general information purposes only. The use of the information is at reader’s risk. No warranty implied or expressed by Oriental Sheet Piling with respect to the use of information this brochure contains. All content contained in this publication is subject to change or modification without notice. Please contact the local office for the latest information.
HEAD OFFICE:
MalaysiaOriental Sheet Piling Sdn. Bhd.Block I, Unit 11,Dataran Prima, Jalan PJU 1/37,47301 Petaling Jaya,Selangor Darul Ehsan, MalaysiaTel: +603 7949 6000Fax: +603 7949 6111
ChinaOriental Sheet Piling (Shanghai) Leasing Co. LtdRoom 2601, 357 Songlin Road,Pudong Area, Shanghai, ChinaTel: +86 21 3126 8700Fax: +86 21 6840 5305
MANUFACTURING PLANT
MalaysiaPulau Indah PlantOriental Steel Pipe Sdn. Bhd.Lot 3, Lorong Sg Chandong,Taman Perindustrian Pulau Indah,42009 Pelabuhan Klang,Selangor Darul Ehsan, Malaysia Tel: +603 3101 3423Fax: +603 3103 3426
Gelang Patah PlantOriental Steel Pipe Sdn. Bhd.PTD 3393, Batu 2,Jalan Gelang Patah Tanjung Kupang,Taman Industri Perintis,79200 Iskandar Puteri, Johor, Malaysia.Tel: +607 510 1127Fax: +607 510 1217
ASEAN OFFICES:
IndonesiaPT. Oriental Sheet PilingGrand Slipi Tower,Lt. 16, Unit A,Jl. Letjen. S. Parman Kav.22-24Jakarta Barat 11480, IndonesiaTel: +62 21 290 22 421Fax: +62 21 290 22 481
PhilippinesOriental SP Inc.IT Office, 8th floor, Sunlife Centre,5th Avenue Corner Rizal Drive,Bonifacio Global City, Taguig,Metro Manila 1634, PhilippinesTel: +63 95 6731 8401
SingaporeOriental Sheet Piling Pte. Ltd.No 1, Commonwealth Lane#02-03 One CommonwealthSingapore 149544Tel: +65 6463 6646Fax: +65 6463 6831
ThailandOriental Sheet Piling Co. Ltd.184/223, Forum Tower, 33rd Floor,Ratchadapisek Road Huaykwang,Bangkok 10310, ThailandTel: +66 2645 2528Fax: +66 2645 2529
VietnamOriental Sheet Piling (Vietnam) Co. LtdLot 2, Tan Tao Industrial Park, Street C,Ward Tan Tao, Binh Tan District,Ho Chi Minh City, 700000, VietnamTel: +84 28 3754 1927Fax: +84 28 3754 1086
CHINA OFFICES:
Oriental Sheet Piling (GuangZhou)Room 304, Yayuan Building,No. 397, Donghuan Road Shiqiao Street,Panyu District, Guangzhou, China 511400Tel: +86 20 6107 1851Fax: +86 20 6107 1852
Oriental Sheet Piling (Wuhan)No. 1, Nuli Village Baiyu Hill Qingshan District,Wuhan, Hubei Province, China 430013Tel: +86 27 8231 6080Fax: +86 27 8232 7002
Hong KongOriental Sheet Piling (China) Co. Ltd.Room 2301, No. 88, Hing Fat Street,Causeway Bay, Hong KongTel: +852 2526 7933 +852 2522 4123Fax: +852 2521 7905
SALES ENQUIRIES EMAIL
ASEAN: [email protected]
CHINA: [email protected]
WEBSITE
www.orientalsteelpipe.com