alusion final...
TRANSCRIPT
Door ProgramALUSION
Aluminium Frame Doors
2010
ALUSION Door Program
ALUSION, Häfele’s latest Aluminium Framed Door Program offers innovative
solutions for a wide variety of applications. As always, our extensive selection
of profiles and inserts help you to create the smooth, clean lines for today’s
modern kitchen.
Follow the simple step by step process to create your indivdual doors, exact
to your specifications.
1. Select one from seven different door types.
2. Select one from nine different profile types.
3. Select your door size and configuration.
4. Select from Glass, Plexiglass or Acrylic insert material.
5. Select self-closing or PUSH hinges (where applicable)
and specific hinge positions.
6. Select the quantity of doors required for your project.
Doors can be supplied assembled ready to install or as a kitset ready for
assembly.
All doors are quoted and supplied with all the associated hardware in accor-
dance with the selected door type.
For your convenience completed door selections can be added to “my
favourites” options to be recalled for future reference.
Please order handles separately.
www.hafele.com/nz
ONLINE
3
www.hafele.com
Hinged Door
Supplied with the following fittings:
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip 60 mm Flat
Profile 28 mm flat and 38 mm flat
Salice Practical hingesWith 105° Opening angle.Push option available.
See The Complete Hafele Furniture andFittings Catalogue page 3.38 – 3.41
Profile 45 mm with 8 mm lip andwithout lipSalice Series 200 hingesWith 110° opening angle.Push option available.
See The Complete Hafele Furniture andFittings Catalogue page 3.16 – 3.21
Profile 60 mm flat
Salice Series 200 hingesWith 94° Opening angle.
See The Complete Hafele Furniture andFittings Catalogue page 3.14 – 3.15
Brushed Stainless Steel finish
Suitable Profiles for Hinged Doors:
Silver Anodised
ALUSION Door Program
4
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip
Please order handles separately.
Please note: For 60 mm Flat a minimum 5 mm gap must be allowedaround each panel
Supplied with the following fittings:For all profile types there are 3 differentoptions:Hardware option 1:Duo Forte Lid Stay, as shown onpage 12.Hardware option 2:Huwil Free for 90° opening, as shown onpage 13. Push option available.
Hardware option 3:Huwil Free for 100° opening, as shownon page 13. Push option available.
Appropriate fittings will be selectedbased on the size and weight of the door
Please note: for 28 mm flat and 38 mmflat profiles side fixing for flap fittings willbe seen through translucent insertoptions*
Please order handles separately.
Suitable Profiles for Lift-Up Flap Doors:
Lift-Up Flap DoorALUSION Door Program
5
Brushed Stainless Steel finish
Silver Anodised
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip 60 mm Flat
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip
Please note: For 60 mm Flat a minimum 5 mm gap must be allowedaround each panel
Please note: For 60 mm Flat a minimum 5 mm gap mustbe allowed around each panel
www.hafele.com
Supplied with the following fittings:Supplied with the following:
Huwil Strato, as shown on page 14
Appropriate fittings will be selectedbased on the size and weight of thedoor
Please note: for 28 mm flat and 38 mmflat profiles side fixing for flap fittings willbe seen through translucent insertoptions
Please order handles separately.
Suitable Profiles for Parallel Lift-Up Doors:
Parallel Lift-Up DoorALUSION Door Program
6
Brushed Stainless Steel finish
Silver Anodised
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip 60 mm Flat
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip
Appropriate adaptor brackets for drawer system front fixing brackets
Drawer front mounting brackets notincluded.
Please note: for 28 mm flat and 38 mmflat profiles side fixing for flap fittings willbe seen through translucent insertoptions.
Please order handles separately.
Suitable Profiles for Drawer Fronts:
Supplied with the following fittings:
Drawer FrontALUSION Door Program
7
Brushed Stainless Steel finish
Silver Anodised
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip 60 mm Flat
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip
Please note: For 60 mm Flat a minimum 5 mm gap must be allowedaround each panel
www.hafele.com
Supplied with the following fittings:Upper running railUpper running gearRolled hinges to connect the two door leaves.
An appropriate quantity of hinges willbe included in accordance with thedoor height.
Bi-Fold DoorALUSION Door Program
Please order handles separately.
8
Brushed Stainless Steel finish
Silver Anodised
Please note: For 60 mm Flat a minimum 5 mm gap must beallowed around each panel
Suitable Profiles for Bi-Fold Doors:
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip 60 mm Flat
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip
Please note: For 60 mm Flat a minimum 5 mm gapmust be allowed around each panel
Supplied with the following fittings:Huwil Senso, as shown on page 15
Appropriate fittings will be selectedbased on the size and weight of thedoor
Please note for 28 mm flat and 38 mmflat profiles side fixing for flap fittings willbe seen through translucent insertoptions
Horizontal Bi-Fold DoorsALUSION Door Program
Please order handles separately.
9
Brushed Stainless Steel finish
Silver Anodised
Suitable Profiles for Horizontal Bi-Fold Doors:
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip 60 mm Flat
28 mm Flat 38 mm Flat 45 mm Flat with 8 mm lip 45 mm Flat without lip
www.hafele.com
Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
All Profile Types may be used with the following door types:
• Hinged Door• Lift-Up Flap Door• Parallel Lift-Up Flap Doors• Bi-Fold Doors• Horizontal Bi-Fold Doors
All profiles available in silver anodized finish and brushed stainlesssteel finish except 60 mm flat is only available in Silver anodised finish.
Profile Types
20
38
9.45.4 ± 0.35
3/4/5.38 9.5
28
20.8
378
21
45
3/
1.2
14
17
45
13.5
Aluminium Frame ProfilesALUSION Door Program
Silver Anodised
10
28 mm Flat
38 mm Flat
45 mm Flat with 8 mm lip
45 mm Flat without lip
60 mm Flat
Brushed Stainless Steel finish
28 mm Flat
38 mm Flat
45 mm Flat with 8 mm lip
45 mm Flat without lip
26
60
271.5
11
13.5
10
Glass
Clear Satinlite Mirror
Painted Glass
Black Techno Tranquil Vapour
Dynamite Napa
Flamingo Winter Storm Magnolia Sterling Silver Mushroom
Arctic Breeze Jet
Wasabi
Pearl Etched
Flemish Etchlite
Custom Painted
Frame Insert materialALUSION Door Program
11Disclaimer: Please check colour samples prior to ordering due to colour variation in printing
Plexiglass
Crystal Snow Ice Green
Akril
Patterned Glass
www.hafele.com
Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
Duo forte Complete set, for flaps made of of wood or with aluminiumframe With adjustable spring force
Note on Duo forteWhen used as flap stay, a magnet hasto be fitted with an installationheight of 189 + 32 mm and a projection of 160 + 32 mm.
Installation referenceNote minimum installation depth.
Order reference Please refer to Häfele Online Aluminium Door Ordering System atwww.hafele.com for the complete product range and orderingdetails.
Use as lid stay,wooden flap
Use as lid stay,flap with aluminium frame
Use as flap stay,wooden flap
• Area of application: Also suitable for use as flap stay• Opening angle: 75º, 90º or 110º• Material: Stay: Zinc alloy,
mounting bracket: Steel• Finish: Nickel plated• Version: With self closing function• Mounting: For left and right hand use• Intallation: Without tools (clip system)• Distance from edge: 37 mm• Lock function: Flap locks in any position• Braking function: Flap locks in end position, release by
slight pressure
FunctionSetting the braking effect to lockingand braking by adjusting the screwwith a SW4 hexagon socket
Adjustment facility
+- kg
Height adjustment+2 mm
Sideadjustment+3/-1 mm
Tiltadjustment+1.5 mm
Pulladjustment
Installation
Duo forte 3666
Lid stay Lid stay
Lid stay
Flap stay Flap stay
Lid Stay Flap FittingALUSION Door Program
12
Free Complete set For one-piece flaps made of wood or withaluminium frame
• Area of application: For wooded flaps with aluminiumframe
• Opening angle: 90º or 100º• Material: Fitting: Steel,
cover cap: Plastic• Finish: Fitting: Nickel plated,
cover cap: Grey, RAL 9006• Installation: Fitting for screw fitting,
flap without tools (clip system) ontopre-mounted mounting bracket
• Hinges not required• Flap locks in any position• With soft close
Installation
Adjustment facility
+- kg
Height adjustment+1/-1.5 mm
Sideadjustment+1/-1.5 mm
Tiltadjustment
Holding poweradjustment
Stay Flap FittingALUSION Door Program
13
www.hafele.com
Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
• Material: Fitting: Steel,cover cap: Plastic
• Fitting: Fitting: Silver coloured anodized,cover cap: Grey, similar to RAL 9006
• Integrated soft close:
Strato 3685 Complete set, for one-piece flaps with aluminium frame
Adjustment facility
+-
kg
Height adjustment+3 mm
Side adjustment+3 mm
Tiltadjustment
Holding poweradjustment
Open angleadjustment
Installation
28Installation dimensions
Flapheightmm
X Y Dca.
H K Rca.
S T Uca.
V
342 186 38 295 205 28 0.8 333 200 50
350 186 38 295 205 38 0.8 346 200 50
420 186 308 295 205 98 0.8 416 200 50
420 255 380 395 271 5 1.2 414 265 37
450 255 380 395 271 35 1.2 444 265 37
500 255 380 395 271 85 1.2 494 265 37
500 293.5 420 450 312.5 30 1.3 494 295 37
550 293.5 420 450 312.5 80 1.3 544 295 37
550 313.5 440 480 332.5 50 1.3 544 315 37
600 313.5 440 480 332.5 100 1.3 594 315 37
600 313.5 440 480 332.5 150 1.3 644 315 37
342 -420
420 -500
500 -550
550 -650
Parallel Lift Up FittingALUSION Door Program
14
Senso 3674 Complete set for two-piece flaps with aluminium frame
Flap made of wood
• Material: Fitting: Steel, aluminium,cover cap: Plastic
• Finish: Fitting: Silver coloured anodized,cover cap: Grey, similar to RAL 9006
• Screw-on brackets for wood supplied
Adjustment facility
kg
Height adjustment+3 mm
Side adjustment+3 mm
Holding poweradjustment
Open angleadjustment
+ -
Tiltadjustment
Installation
Installation dimensions
Flapheightmm
∂ D H R T U V W
550 101º 57.5 290 63.5 70 139 192 390
600 101º 73.5 326 79.5 70 130 170 405
650 103º 67.5 340 73.5 95 160 220 425
720 102º 75.5 378 81.5 96 207 261 456
800 100º 71.5 392 77.5 85 255 260 500
865 102º 47.5 400 53.5 120 260 315 525
Horizontal Bi-Fold FittingALUSION Door Program
15
Hä
fele
De
sig
n C
en
tre
s
www.hafele.com • freephone 0800 4 HAFELE
Häfele (N.Z.) Limited
16 Accent Drive
East Tamaki
Auckland
P (09) 274 2040
F (09) 274 2041
South Island Office
5 Wigram Close
Sockburn
Christchurch
P (03) 343 8200
F (03) 343 8201
Lower North Island Office
The Wool Store Level 1
262 Thorndon Quay
Wellington
P (04) 472 0294
F (04) 472 0295
Häfele Design Centre
20 Beaumont Street
Auckland City
Auckland
P (09) 274 2530
F (09) 274 2531