aluminum and stainless
TRANSCRIPT
IndexALUMINUM PAGE
SHEETFLAT . . . . . . . . . . . . . . . . . . . . . . 2, 3PAINTED . . . . . . . . . . . . . . . . . . . . 3EMBOSSED . . . . . . . . . . . . . . . . . . 3PERFORATED . . . . . . . . . . . . . . . . 3EXPANDED METAL . . . . . . . . . . 29
PLATE . . . . . . . . . . . . . . . . . . . . . . . 2, 3TREAD PLATE . . . . . . . . . . . . . . . . . 3ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . 4BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . 4SHAPES
BEAMS . . . . . . . . . . . . . . . . . . . . . . 4ANGLES . . . . . . . . . . . . . . . . . . . . . 5CHANNELS . . . . . . . . . . . . . . . . . . 5TEES . . . . . . . . . . . . . . . . . . . . . . . . 8ZEES . . . . . . . . . . . . . . . . . . . . . . . . 8MARINE . . . . . . . . . . . . . . . . . . . 8, 9
PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . 6HALF PIPE . . . . . . . . . . . . . . . . . . . . . 6HOLOBAR . . . . . . . . . . . . . . . . . . . . . 6TUBING . . . . . . . . . . . . . . . . . . . . . . . 7STAIR TREAD . . . . . . . . . . . . . . . . . . 9GRATING . . . . . . . . . . . . . . . . . . . . . . 9FITTINGS . . . . . . . . . . . . . . . . . . . . . 27 WELD WIRE . . . . . . . . . . . . . . . . . . 27 HINGES . . . . . . . . . . . . . . . . . . . . . . 28
BRASSSHEET . . . . . . . . . . . . . . . . . . . . . 10PLATE . . . . . . . . . . . . . . . . . . . . . 10ROD . . . . . . . . . . . . . . . . . . . . . . . 11BAR . . . . . . . . . . . . . . . . . . . . . . . 11BUSHING (SAE 660) . . . . . . . . . 13FITTINGS . . . . . . . . . . . . . . . . . . 27SHIM STOCK . . . . . . . . . . . . . . . 27
COPPERSHEET . . . . . . . . . . . . . . . . . . . . . . 12BAR. . . . . . . . . . . . . . . . . . . . . . . . 12PLATE . . . . . . . . . . . . . . . . . . . . . . 12
STAINLESSSHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . 14PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . 14ROD . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16BAR . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 17ANGLES . . . . . . . . . . . . . . . . . . . . . . . 17, 19SHAFTING
BOAT. . . . . . . . . . . . . . . . . . . . . . . . . . 16PUMP. . . . . . . . . . . . . . . . . . . . . . . . . . 16CHROME ROD. . . . . . . . . . . . . . . . . . 16
BEAMS . . . . . . . . . . . . . . . . . . . . . . . . 19, 20CHANNELS . . . . . . . . . . . . . . . . . . . . 21, 22PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18TUBING . . . . . . . . . . . . . . . . . . . . . . . . . . 18STRUCTURAL TUBING . . . . . . . . . . . . 18EXPANDED METAL . . . . . . . . . . . . . . . 29FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . 27WELD WIRE . . . . . . . . . . . . . . . . . . . . . . 27HINGES . . . . . . . . . . . . . . . . . . . . . . . . . . 28LATCHES . . . . . . . . . . . . . . . . . . . . . . . . 28
ACCESSORIES
BI-METALLIC . . . . . . . . . . . . . . . . . . . . . . 10BURSTING PRESSURE, SEAMLESS STAINLESS PIPE . . . . . . . . . . . . . . . . . . . . 23MARINE FITTINGS . . . . . . . . . . . . . . . . . . 24CAST IRON . . . . . . . . . . . . . . . . . . . . . . . . . 24 DIMENSION, SEAMLESS WELD FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . 25DIMENSION, FORGED FLANGES . . . . . 26FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . 27WELD WIRE . . . . . . . . . . . . . . . . . . . . . . . . 27ANODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27HINGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28LATCHES . . . . . . . . . . . . . . . . . . . . . . . . . . . 28EXPANDED METAL . . . . . . . . . . . . . . . . . 29GALVANIC CORROSION . . . . . . . . . . . . . 30CREDIT APPLICATION. . . . . . . . . . . . 31, 32
ALUMINUM & STAINLESS, INC.
– 2 –
ALUMINUM FLAT SHEET3003 - H14
Mill Finish • 1/2 Hard
Width Est Wt.Thickness and Lbs. per Length Sheet
.025” 48 x 120 14
.3564 Lb. Sq. Ft.
.032” 48 x 120 18
.4562 Lb. Sq. Ft.
.040” 48 x 120 23
.5702 Lb. Sq. Ft.
.050” 48 x 120 29
.7128 Lb. Sq. Ft.
.063” 48 x 120 36
.8981 Lb. Sq. Ft.
.080” 48 x 120 461.1405 Lb. Sq. Ft.
1/8”-(.125”) 48 x 120 711.782 Lb. Sq. Ft.
ALUMINUM FLAT SHEET5052 - H32
Mill Finish • 1/2 Hard
Width Est Wt.Thickness and Lbs. per Length Sheet
.063” 48 x 96 28
.880 Lb. Sq. Ft. 48 x 120 35 48 x 144 42
.080” 48 x 120 451.117 Lb. Sq. Ft. 48 x 144 54
.090” 48 x 96 401.257 Lb. Sq. Ft. 48 x 120 50 48 x 144 60 48 x 240 101 60 x 144 75 60 x 240 126
.100” 48 x 96 451.397 Lb. Sq. Ft. 48 x 120 56 48 x 144 67 48 x 240 112 60 x 96 56 60 x 144 84 60 x 240 140
1/8”-(.125”) 48 x 96 561.746 Lb. Sq. Ft. 48 x 120 70 48 x 144 84 48 x 240 140 60 x 96 70 60 x 144 105 60 x 240 175 72 x 144 126 72 x 240 210
3/16”-(.190”) 48 x 96 852.654 Lb. Sq. Ft. 48 x 144 127 48 x 240 212 60 x 96 106 60 x 144 159 60 x 240 265 72 x 144 191 72 x 240 318
ALUMINUM PLATE5052 - H32
Mill Finish
Width Est Wt.Thickness and Lbs. per Length Sheet
1/4”-(.250”) 48 x 96 112
3.492 Lb.Sq.Ft. 48 x 144 168
48 x 240 279
60 x 240 349
72 x 240 419
96 x 240 559
3/8”-(.375”) 48 x 96 168
48 x 144 251
ALUMINUM SHEET5083, 5086, & 5456 - H116
ABS Certified AvailableMill Finish
1/8”-(.125”) 48 x 96 55
1.728 Lb.Sq.Ft. 48 x 144 83
48 x 240 138
60 x 240 173
72 x 240 207
84 x 240 242
96 x 240 276
3/16” -(.190”) 48 x 96 84
2.627 Lb. Sq. Ft. 48 x 144 126
48 x 240 210
60 x 96 105
60 x 144 158
60 x 240 263
72 x 240 315
84 x 240 368
96 x 240 420
108 x 240 473
120 x 240 525
ALUMINUM PLATE5083, 5086, & 5456 - H116
ABS Certified AvailableMill Finish
Width Est Wt.Thickness and Lbs. per Length Sheet
1/4”-(.250”) 48 x 96 1113.456 Lb. Sq. Ft. 48 x 144 166 48 x 240 276 60 x 240 346 72 x 240 415 84 x 240 484 96 x 240 553 108 x 240 622 120 x 240 691
5/16”-(.313”) 48 x 240 3464.327 Lb. Sq. Ft. 60 x 240 433 72 x 240 519 84 x 240 606 96 x 240 692 108 x 240 779 120 x 240 865
3/8”-(.375”) 48 x 96 1665.184 Lb. Sq. Ft. 48 x 240 415 60 x 240 518 72 x 240 622 84 x 240 726 96 x 240 829 108 x 240 933 120 x 240 1037
1/2”-(-.500”) 48 x 240 5536.912 Lb. Sq. Ft. 60 x 240 691 72 x 240 829 84 x 240 968 96 x 240 1106 108 x 240 1244 120 x 240 1382
5/8”-(.625”) 48 x 240 6918.640 Lb. Sq. Ft. 60 x 240 864 72 x 240 1037 84 x 240 1210 96 x 240 1382 108 x 240 1555 120 x 240 1728
3/4”-(.750”) 48 x 240 82910.368 Lb. Sq. Ft. 60 x 240 1037 72 x 240 1244 96 x 240 1659
1”-(1.00”) 48 x 240 110613.824 Lb. Sq. Ft. 60 x 240 1382 72 x 240 1659 96 x 240 2212
11/4”-(1.25”) 60 x 240 172817.280 Lb. Sq. Ft. 72 x 240 2074 96 x 240 2765
11/2”-(1.50”) 84 x 240 290320.736 Lb. Sq. Ft. 96 x 240 3318
2”-(2.00”) 48 x 240 221227.648 Lb. Sq. Ft. 60 x 240 2765
Lafayette New Orleans 800-252-9074 800-535-9156
– 3 –
METRIC SIZES5083
ABS CertifiedMill Finish
Federal Specification QQA-250/7 Width Est Wt. Thickness and Lbs. per Length Sheet3mm-(.118”) 84 x 288 2744mm-(.158”) 84 x 288 3675mm-(.196”) 84 x 288 455
ALUMINUM FLAT SHEET6061-T6 Sheet-Mill Finish
Thickness Width Lgth Wt/Sht1/8”-(.125”) 48 144 851.80 Lb. Ft.2
3/16”-(.190”) 48 144 1292.74 Lb. Ft.2
ALUMINUM PLATE6061-T651 Plate-Mill Finish48.5” x 144.5” OR CUT TO SPECS
Wt. Per Est. Wt.Thickness Sq. Ft. Each
1/4” 3.53 177 3/8” 5.29 264 1/2” 7.06 351 5/8” 8.82 437 3/4” 10.58 526 1” 14.11 700 11/4” 17.64 872 11/2” 21.17 1044 2” 28.22 1393 21/4” 31.75 1564 21/2” 35.28 1743 3” 42.34 2086 31/2” 49.39 2438 4” 56.45 2792 5” 70.56 3479 6” 84.67 4165
*Thicker Material Available
ALUMINUM PAINTED SHEETThickness Width Lgth Color .040 48 120 WHITE
Other Colors Available
ALUMINUM PERFORATED SHEET .050 48 120
3/16 Holes on 1/4” Centers Staggered 29 lbs. each
Approx. Thickness Width & Lgth Wt. Each
.063” 48 x 120 40 • .100” 48 x 96 49 • 48 x 192 99 • 60 x 192 123 • .125” 48 x 96 60 • 48 x 192 120 • • • 48 x 240 150 • • 60 x 192 150 • • • 60 x 240 188 • • .188” 48 x 96 88 • • 48 x 192 177 • • 48 x 240 221 • • 60 x 192 221 • • 60 x 240 276 • • • .250” 48 x 96 117 • 48 x 192 235 • 48 x 240 294 • • 60 x 192 294 • • 60 x 240 367 • .313” 48 x 240 347 • 60 x 420 434 • .375” 60 x 192 434 • 60 x 240 543 •
ALUMINUM PERFORATEDSTUCCO EMBOSSED
COILSThickness Width Lgth Wt/Sht
.020 48 50 ft. 50 lbs
ALUMINUM SHEETSTUCCO EMBOSSED
Thickness Width Lgth Wt/Sht
.032 48 120 18
ALLOY 5052, 5086
ALUMINUM PLATE DIAMOND TREAD 5-BAR TREAD
30035052
50865052 5-Bar
Stucco Pattern
ALUMINUM & STAINLESS, INC.
– 4 –
ALUMINUM RODROUND
Standard 20-Foot Lengths3” Dia. & Up 12-Foot Lengths
Alloy 5086 • 6061 • 6063 Wt. Size Per Ft. 3/16 .032 * 1/4 .058 5/16 .090 * 3/8 .130 * 1/2 .231 * 5/8 .361 * 3/4 .520 7/8 .707 * 1 .924 11/8 1.169 * 11/4 1.443 13/8 1.746 * 11/2 2.078 15/8 2.439 13/4 2.829 17/8 3.247 * 2 3.695 21/4 4.676 21/2 5.773 * 3 8.313 * 31/2 11.314 * 4 14.778 41/4 16.683 * 41/2 18.703 43/4 20.839 5 23.091 51/2 27.940 6 33.251 61/2 39.023 7 45.258 8 59.112 9 74.814 10 92.363 11 111.759 12 133.002 13 156.093 14 181.031 15 207.816*5086 Available
ALUMINUM BARSQUARE
Standard 12 Foot LengthsAlloy 6061 T6
Wt. Size Per Ft.
1/2 .294 5/8 .459 3/4 .662 1 1.176 11/4 1.838 11/2 2.646 2 4.704 3 10.584
Wt. Size Per Ft.
* 1/8 x 1/2 .074 * 1/8 x 3/4 .110 1/8 x 1 .147 ** 1/8 x 11/2 .221 ** 1/8 x 2 .294 1/8 x 3 .441 1/8 x 4 .588 ** 3/16 x 1 .221 ** 3/16 x 11/4 .276 ** 3/16 x 11/2 .331 ** 3/16 x 2 .441 ** 3/16 x 21/2 .551 ** 3/16 x 3 .662 ** 3/16 x 4 .882 3/16 x 5 1.103 * 1/4 x 3/4 .221 ** 1/4 x 1 .294 1/4 x 11/4 .368 ** 1/4 x 11/2 .441 ** 1/4 x 2 .588 ** 1/4 x 21/2 .735 ** 1/4 x 3 .882 ** 1/4 x 4 1.176 1/4 x 5 1.470 ** 1/4 x 6 1.764 * 1/4 x 8 2.352 * 3/8 x 3/4 .331 ** 3/8 x 1 .441 * 3/8 x 11/4 .551 ** 3/8 x 11/2 .662 ** 3/8 x 2 .882 ** 3/8 x 21/2 1.103 ** 3/8 x 3 1.323 ** 3/8 x 4 1.764 ** 3/8 x 5 2.205 ** 3/8 x 6 2.646 3/8 x 8 3.528*12 Foot Lengths** Stocked in 5086
Wt. Size Per Ft.
1/2 x 1 .588 1/2 x 11/2 .882 ** 1/2 x 2 1.176 1/2 x 21/2 1.470 ** 1/2 x 3 1.764 ** 1/2 x 4 2.352 1/2 x 5 2.940 ** 1/2 x 6 3.528 * 1/2 x 8 4.704 * 1/2 x 10 5.880 * 3/4 x 1 .882 * 3/4 x 11/2 1.323 3/4 x 2 1.764 ** 3/4 x 3 2.646 3/4 x 4 3.528 3/4 x 5 4.410 3/4 x 6 5.292 * 3/4 x 10 8.820 * 3/4 x 12 10.584 * 1 x 2 2.352 1 x 3 3.528 1 x 4 4.704 1 x 5 5.880 1 x 6 7.056 1 x 7 8.232 1 x 8 9.408 1 x 10 11.760 1 x 12 14.112 * 11/4 x 2 2.940 * 11/4 x 6 8.820 * 11/2 x 2 3.528 * 11/2 x 3 5.292 * 11/2 x 6 10.584 * 11/2 x 10 17.640 * 2 x 4 9.408 * 3 x 6 21.168
ALUMINUM BARRECTANGULAR - SQUARE EDGE
Standard 20-Foot LengthsAlloy 5086 • 6061
A
B
t
AMERICAN STANDARD ALUMINUM I-BEAMSStandard 25 Foot Lengths
Alloy 6061*5086 Available
Size Inches Wt. A B t Per Ft. *2 .875 .188 .780 *3 2.330 .170 1.964 4 2.660 .190 2.646 4 2.000 .250 2.220 5 3.000 .210 3.434 6 3.330 .230 4.304 8 4.000 .270 6.350
WIDE FLANGE BEAM 4 4 .313 4.760 6 6 .240 5.399
Lafayette New Orleans 800-252-9074 800-535-9156
– 5 –
ANGLESAlloy 5086 - 606125 Foot Lengths
Size Inches Wt. A B t Per Ft. 1/2 1/2 1/8 .131 3/4 3/4 1/8 .201 1 1 1/8 .275 1 1 3/16 .400 1 1 1/4 .514 11/4 11/4 1/8 .343 11/4 11/4 3/16 .510 11/4 11/4 1/4 .656 11/2 11/2 1/8 .432 11/2 11/2 3/16 .619 11/2 11/2 1/4 .809 2 2 1/8 .577 2 2 3/16 .850 2 2 1/4 1.110 2 2 3/8 1.606 21/2 21/2 3/16 1.070 21/2 21/2 1/4 1.404 21/2 21/2 3/8 2.047 3 3 3/16 1.275 3 3 1/4 1.684 3 3 3/8 2.474 3 3 1/2 3.227 4 4 1/4 2.283 4 4 3/8 3.366 4 4 1/2 4.414 5 5 3/8 4.237 5 5 1/2 5.578 6 6 3/8 5.119 6 6 1/2 6.754
UNEQUAL ANGLESAlloy 5086 - 606125 Foot Lengths
Size Inches Wt. A B t Per Ft. 1 3/4 1/8 .239
2 1 1/8 .431
2 11/2 1/8 .496
2 11/2 3/16 .731
2 11/2 1/4 .956
21/2 2 1/4 1.257
3 1 3/16 .840
3 2 3/16 1.071
3 2 1/4 1.403
3 2 3/8 2.046
3 21/2 1/4 1.537
4 2 3/16 1.280
4 2 1/4 1.680
4 3 1/4 1.988
4 3 3/8 2.926
5 3 1/4 2.329
5 3 3/8 3.349
6 2 3/16 1.760
6 3 1/4 2.600
6 4 1/4 3.160
6 4 3/8 4.237
6 4 1/2 5.578
8 6 3/4 11.679
9 3 1/4 3.500
CHANNELSSQUARE CORNERS
Alloy 6061 - 606325 Foot Lengths
Size Inches Wt. A B t Per Ft. 3/4 3/4 1/8 .300 1 1 1/8 .413 11/4 11/4 1/8 .530 11/2 11/2 3/16 .910 2 1 1/8 .563 2 11/2 3/16 1.040 2 2 3/16 1.260 2 2 1/4 1.660 21/4 2 1/4 1.691 4 11/2 1/8 .992
* SPECIAL CHANNELSFOR
MARSH BUGGIE CLEATSCall us for Price & Delivery
CHANNELSSQUARE CORNERS
Alloy 6061 - 606325 Foot Lengths
Size Inches Wt. A B t Per Ft. 3 1.41 .170 1.435 3 1.49 .258 1.729 3 1.596 .356 2.074 4 1.58 .180 1.846 4 1.647 .247 2.161 4 1.720 .320 2.504 5 1.750 .190 2.316 5 2.032 .472 3.975 6 1.945 .225 3.002 6 2.034 .314 3.631 6 2.157 .437 4.498 8 2.290 .250 4.252 8 2.527 .487 6.484 *8 3.000 .375 6.600 *8 3.750 .250 5.780 10 2.600 .240 5.278 10 2.886 .526 8.641 12 2.960 .300 7.411 * SPECIAL SQUARE CORNERS
ALUMINUM STANDARD STRUCTURAL SHAPES
A
B
t
B
tA
B
A
t
ALUMINUM & STAINLESS, INC.
– 6 –
ALUMINUM PIPESCHEDULE 40
Alloys: 6063 - 6061 - 5086Standard 20 Foot Lengths
Actual Wall I.P.S O.D. I.D. Thickness Wt. Lbs. Inches Inches Inches Inches Per Foot 1/4 .540 .364 .088 .147 3/8 .675 .493 .091 .196 * 1/2 .840 .622 .109 .294 * 3/4 1.050 .824 .113 .391 * 1 1.315 1.049 .133 .581 * 11/4 1.660 1.380 .140 .786 * 11/2 1.900 1.610 .145 .940 * 2 2.375 2.067 .154 1.260
Actual Wall I.P.S O.D. I.D. Thickness Wt. Lbs. Inches Inches Inches Inches Per Foot 21/2 2.875 2.469 .203 2.004 * 3 3.500 3.068 .216 2.621 * 31/2 4.000 3.548 .226 3.151 * 4 4.500 4.026 .237 3.733 5 5.563 5.047 .258 5.057 * 6 6.625 6.065 .280 6.564 * 8 8.625 7.981 .322 9.878 10 10.750 10.020 .365 14.000 12 12.750 12.000 .375 17.150
*Available in 5086
SCHEDULE 80Alloys: 6063 - 6061 - 5086Standard 20 Foot Lengths
Actual Wall I.P.S O.D. I.D. Thickness Wt. Lbs. Inches Inches Inches Inches Per Foot 1/2 .840 .546 .147 .376 * 3/4 1.050 .742 .154 .510 * 1 1.315 .957 .179 .751 * 11/4 1.660 1.278 .191 1.037 * 11/2 1.900 1.500 .200 1.256 * 2 2.375 1.939 .218 1.737 * 21/2 2.875 2.323 .276 2.650 * 3 3.500 2.900 .300 3.547
Actual Wall I.P.S O.D. I.D. Thickness Wt. Lbs. Inches Inches Inches Inches Per Foot * 31/2 4.000 3.364 .318 4.326 * 4 4.500 3.826 .337 5.183 5 5.563 4.813 .375 7.188 * 6 6.625 5.761 .432 9.884 8 8.625 7.625 .500 15.010 10 10.750 9.562 .593 22.290 12 12.750 11.374 .687 30.660
ALUMINUM HALF PIPEAlloy 6061 - 5086
20’ Lengths Wt. Sch. 40 Per Length 11/2” x 20 ft. 10 2” x 20 ft. 13 21/2” x 20 ft. 24 3” x 20 ft. 26
Sch. 80 2” x 20 ft. 16.3 6” x 20 ft. 100
Special 4” OD x 1/4” Wall 34 4” OD x 1/2” Wall 63 41/4” OD x 3/8” Wall 54
ALUMINUM HOLOBARAlloy 6061T6
Wall Weight O.D. I.D. Thickness Lbs. Inches Inches Inches Per Foot 11/4 3/4 1/4 0.952 11/2 5/8 7/16 1.754 11/2 3/4 3/8 1.606 2 1 1/2 2.884 21/4 11/2 3/8 2.598 21/4 13/4 1/4 1.923 21/2 1 3/4 4.841 21/2 11/2 1/2 3.845
Wall Weight O.D. I.D. Thickness Lbs. Inches Inches Inches Per Foot 21/2 13/4 3/8 2.944 3 2 1/2 4.618 31/2 2 3/4 7.853 31/2 21/2 1/2 5.711 4 2 1 11.080 4 21/2 3/4 9.006 4 3 1/2 6.663 4 31/4 3/8 5.022 41/2 21/2 1 12.930 41/2 3 3/4 10.710 41/2 31/2 1/2 7.615 41/2 33/4 3/8 5.715 5 3 1 14.780 5 31/2 3/4 12.140 51/2 31/2 1 16.630 51/2 4 3/4 13.560 51/2 41/2 1/2 9.519 6 4 1 19.040 6 41/2 3/4 14.990 6 5 1/2 10.160 6 51/4 3/8 7.793 61/2 5 3/4 15.930 61/2 41/2 1 20.320 7 5 1 22.170 71/2 51/2 1 24.010 71/2 61/2 1/2 12.930 8 6 1 26.650 8 7 1/2 13.860 81/2 61/2 1 27.710 9 7 1 29.560 9 6 11/2 42.413 9 5 2 51.720 10 8 1 33.250 12 111/4 3/8 16.434 12 10 1 40.640
*Available in 5086
HolobarCont’d
Lafayette New Orleans 800-252-9074 800-535-9156
– 7 –
EXTRUDED SQUARE TUBESQUARE & RADIUS CORNERS
Alloy & Temper: 6003 T5 & 6061 T6
Size Inches Available Wt. A t Lengths Corner* Per Ft. 1/2 1/8 21’1” S .292 3/4 1/8 21’1” S .368 1 1/16 25’ R .286 1 1/8 21’1” S .515 11/4 .095 21’ R .516 11/4 1/8 21’1” S .662 11/2 1/8 21’1” S .809 11/2 3/16 24’ R 1.161 2 1/8 21’1” S,R 1.103 2 3/16 21’1”, 24’ R 1.602 2 1/4 21’1”, 24’ S,R 2.058 21/2 1/4 24’ S 2.646 3 1/8 21’1” S 1.691 3 3/16 24’ R 2.487 3 1/4 24’ S,R 3.234 4 1/8 24’ S 2.279 4 1/4 24’ S,R 4.410
*S = Square Corner R = Radius Corner
EXTRUDEDRECTANGULAR TUBE
SQUARE CORNERSAlloy and Temper 6063-T5 & 6061-T6
Size Inches Available Wt. A B t Length Corner* Per Length 3/4 11/2 1/8 24’ S .588 1 11/2 1/8 21’1” S .662 1 2 .094 20’ S .620 1 2 1/8 21’1” S .809 1 3 1/8 21’1” S,R 1.103 1 4 1/8 21’1” S 1.423 1 4 3/16 25’ R 1.997 11/2 2 1/8 21’1” S .956 11/2 3 1/8 21’1” S 1.250 13/4 3 1/8 25’ S 1.323 2 3 1/8 21’1” S 1.396 2 3 1/4 24’, 25’ S 2.646 2 4 1/8 21’1” S 1.690 2 4 1/4 24’ S 3.234 2 5 1/8 21’1” S 1.984 3 4 1/4 24’ S,R 3.833 3 6 1/4 24’ R 4.998 4 6 1/4 24’ S 5.586 8 6 3/8 28’ S 13.850
*S = Square Corner R = Radius Corner
ALUMINUM TUBING
ALLOY 6063, 20’ Lengths13/8 OD x .062 Wall
.288 Lbs/Ft
We Stock Extensive Inventoriesof Both Aluminum & Stainless
Fittings, Such As:FlangesElbowsTees
CouplingsNipples
Bushings/ReducersCaps
Unions
A
t
A
tB
ALUMINUM HANDRAILOVAL
Alloy 6061, 20’ Lengths
Size Inches Wt. A B t Per Length 2.562 1.562 .125 20.0
.090 EDGE RAIL6063 T6 16’ Lengths
.54 LBS/FTCloses to 1.05” Diameter
Fits .090 Plate Edge
A
B
t
30º
ALUMINUM & STAINLESS, INC.
– 8 –
TEE BARS 25 Foot Lengths 5086 & 6061
Size Inches Wt. Lbs. A B t Per Ft. 1 2 3/16 .622 11/2 3 3/16 .951 2 1 3/16 .624 2 2 1/4 1.103 2 2 3/8 1.650 2 3 1/4 1.397 2 33/4 3/16 1.229 2 4 1/4 1.690 2 5 1/4 1.984 2 5 3/8 2.920 2 6 1/4 2.279 2 6 3/8 3.362 2 8 1/4 2.867 21/2 21/2 5/16 1.950 21/2 9 5/16 4.120 21/2 11 1/4 3.920 21/2 11 5/16 4.846 21/2 11 3/8 5.788 21/2 12 1/2 8.320 4 3 3/8 2.922
BULB TEE 5086 & 6061 25’ Lengths
Size Inches Wt. Lbs A B C t Per Ft. 2 1 1/2 3/16 .680 3 11/2 1/2 3/16 1.115 3 11/2 1/2 1/4 1.354 3 13/4 3/4 3/16 1.230 3 2 1 1/8 .846 3 2 1/2 1/4 1.510
HAT SECTION 6061 T6 25’ Lengths
Wt./ A B C Lengths 21/2 11/2 1/8 16 Lbs
KEEL CAP
25’ Lengths 6061 T6
.250 TYPICAL WALL 1.162 lbs/ft
HATCH SECTION6061 T6
SP 8539
SP 9518
SP 7535
Size Inches Wt. Lbs DIE # A B Per Length SP 8539 1.656 1.500 33 SP 9518 1.375 1.500 30 SP 7535 .938 1.875 18
25 Foot Lengths
GUNNEL SECTIONSmooth or Ribbed6063 Alloy | 20’
A B C D E T 2.188 1.687 .750 .188 30˚ .125
PLATE CAP5086
Wt. Per A B C Foot
2.00 .260 .250 .649 Lbs 2.25 .327 .250 .834 Lbs
ZEES6061 T6 | 25’ Lengths
Size Inches Wt. A B t Per Ft. 31/4 5 1/2 6.2 Lbs
J SECTION6061 T6 | 25’ Lengths
Size Inches Wt. A B C t Per Ft. DIE# 3 11/2 1 3/16 1.14 SP7540 17/8 13/4 3/4 1/4 1.14 SP7541
MOULDING6063 Alloy
BON - 18512 Foot Lengths
A
B
t
B
A
C
t
BC
A
1.750
1.7503.250 R.
SYM
A
B
A
B
A
B
C
A D
BE
T
A
CB
T
A
B
t
t
A
B
C
t
.380
.125
.625
.188
Lafayette New Orleans 800-252-9074 800-535-9156
– 9 –
RUB RAIL
25 Foot Lengths - 42 Lbs Ea.1.68 Lbs. per Foot
STAIR TREAD25 Foot Lengths
Size Inches Wt. Lbs A B Per Ft. 11/2 1 .372 4 13/4 1.360 6 13/4 1.760 9 13/4 2.568
GRIP STRUT GRATINGAluminum Alloy 5052 - H32
12 Foot Lengths Wght. Type No. Size Depth per Ft. 420A 91/2” 2” 1.37 Lbs 420A 113/4” 2” 1.59 Lbs
SEAT BASES6061 T6
SP9844 SP9631 Wght. per Ft. 2.049 Lbs Wght. per Ft. .875 Lbs
ALUMINUM RECTAGULARBAR GRATING
Plain and SerratedALLOY 6063 - T6
Call Us For - Price and Delivery on Fiberglass & Stainless Grating
SPRAY RAIL Wght. A B per Ft. 2.345 4.062 .971 Lbs 2.615 3.600 1.810 Lbs 4.500 7.750 3.584 Lbs
MARINE SPECIALTY EXTRUSIONS
Bar Size Grating Size Wght. per Inches Feet Sq.Ft.
1/8 x 1 2’ x 24’ 1.9 Lbs 3/16 x 1 2’ x 24’ 2.7 Lbs 3/16 x 1 3’ x 24’ 2.7 Lbs 3/16 x 11/4 3’ x 24’ 3.2 Lbs
BAR SPACING
4.000
2.000.250
2.000
TO P.I.
B
A
2.75
4.001.00
.812
4.00
.188
2.625
1.250
.875
A
B
4”C.B.
C/C B.B.13/16”
1.8754.156
.789
1.545
.094r.250r
.156 X 45º
.312.188
5.000
6º30”16º30”
.625
RUB RAIL - 5086 - 4.55 lbs/ft
ALUMINUM & STAINLESS, INC.
– 10 –
Size Wt. Per Inches Inches Square Foot (lbs.) 1/8” (.125) 48 x 120 5.47 3/16” (.188) 48 x 120 8.2
1/4” (.250) 48 x 120 10.9
5/16” (.313) 48 x 120 13.7 60 x 120
3/8” (.375) 48 x 120 16.4 60 x 120
1/2” (.500) 48 x 120 21.9 60 x 120
5/8” (.625) 48 x 120 27.4 60 x 120
Size Wt. Per Inches Inches Square Foot (lbs.) 3/4” .(750) 48 x 120 32.8 60 x 120 1” (1.000) 48 x 120 43.8 60 x 120 11/4”(1.250) 48 x 120 54.7 60 x 120 11/2”(1.500) 48 x 120 65.7 60 x 120 2” (2.000) 48 x 120 87.6 60 x 120
Composite inserts that make it possibleto permanently Join dissimilar metals(aluminum / steel) by standard weldingtechniques.
Also known as detacouple or tri-clad,this material consists of 5000 SeriesMarine Aluminum & SA 516-55 LowCarbon Manganese Steel, separated bya layer of 1100 Alloy Aluminum.
Approved worldwide; U.S. Military SpecMIL-J-2445.
ALUMINUM / STEEL TRANSITION MATERIAL
Call for Price and Delivery on Brass Fittings
NAVAL BRASS SHEET AND PLATE HOT ROLLED CDA 464
BI-METALLIC
AluminumPlate
TransitionJoint
SteelPlate
T
W
Stock Plate Sizes 3/4” Thick 48 x 144 20.60 Lbs per Ft2
13/8” Thick 48 x 144 39.41 Lbs per Ft2
Water Jet Cut to Desired Width
Lafayette New Orleans 800-252-9074 800-535-9156
– 11 –
Size Wt./Ft. 1/8 .045 3/16 .102 1/4 .181 5/16 .283 3/8 .407 7/16 .554 1/2 .723 9/16 .915 5/8 1.130 3/4 1.630 7/8 2.220 1 2.890 11/8 3.660 11/4 4.520 13/8 5.470 11/2 6.510 15/8 7.640 13/4 8.860
Size Wt./Ft. 17/8 10.20 2 11.60 21/4 14.60 23/8 16.30 21/2 18.10 25/8 19.90 23/4 21.90 3 26.00 31/4 30.60 31/2 35.40 33/4 40.70 4 46.30 41/4 52.30 41/2 58.60 43/4 65.30 5 72.30 51/2 87.50 6 104.00 8 195.50
Size Wt./Ft. 1/8 .057 3/16 .130 1/4 .230 5/16 .360 3/8 .518 7/16 .705 1/2 .921 9/16 1.170 5/8 1.440 3/4 2.070
Size Wt./Ft. 7/8 2.82 1 3.68 11/8 4.66 11/4 5.76 13/8 6.97 11/2 8.29 13/4 11.30 2 14.70 21/2 23.00 3 33.20
Size Wt./Ft. 3/16 .112 1/4 .199 5/16 .312 3/8 .449 1/2 .798 5/8 1.250
Size Wt./Ft. 3/4 1.80 1 3.19 11/4 4.99 13/8 6.03 11/2 7.18 2 12.80
BRASS ROUND RODIn Standard Mill Lengths - 12 Foot Random
464 Naval & CDA 360 Free-Cutting
FREE-CUTTING BRASS BARRectangular-Drawn-Half Hard Temper
Price on Request
FREE-CUTTING BRASS BARHexagonal
In Standard Mill Lengths - 12 Foot RandomCDA 360 ASTM B16
FREE-CUTTING BRASS BARSquare
In Standard Mill Lengths - 12 Foot RandomCDA 360 ASTM B16
– 12 –
ALUMINUM & STAINLESS, INC.
FLAT COPPER SHEETASTM B152 COLD ROLLED CDA 119
Wt./Ft.2 Thickness Size Inches Wt./Sht. 16 oz. .0216 36 x 120 30 20 oz. .0270 36 x 120 37.5 24 oz. .0323 36 x 120 45 32 oz. .0431 36 x 96 48 48 oz. .0647 36 x 96 75 96 oz. .1250 36 x 96 144
COPPER PLATE Thickness Weight 1/4 ” 11.6 Lbs per Ft.2 3/8 ” 17.4 Lbs per Ft.2
COPPER BUS BAR
Rectangular - Square Corner12 Foot Lengths
Wt. Size Inches Per Ft.
1/8 x 11/2 .726
3/16 x 1 .727
1/4 x 1/2 .484
1/4 x 3/4 .727
1/4 x 1 .969
1/4 x 11/2 1.45
1/4 x 2 1.94
1/4 x 3 2.91
1/4 x 4 3.88
Wt. Size Inches Per Ft.
1/4 x 5 4.84
1/4 x 6 5.81
3/8 x 2 2.90
1/2 x 2 3.88
1/2 x 3 5.81
1/2 x 4 7.75
1/2 x 5 9.69
1/2 x 6 11.62
3/4 x 1 2.91
– 13 –
CONTINUOUS CAST SAE 660 BEARING BRONZE105” Bars cut to customer length requirements.
Stock sizes are nominal. Material purchased from this stock will machine cleanly to the sizes listed.Actual sizes provide allowances for cleanup, as follows:
Outside Diameters to 4”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/32”finish,ODandIDOutside Diameters 4” to 5” incl. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/32”finish,ODandIDOutside Diameters over 5”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/32”finish,ODandID
WT. PER LBS../ I.D. O.D. IN. 105”
1/2 x 3/4 .11 11.55 7/8 .16 16.80 1 .22 23.10 11/8 .30 31.50 11/4 .37 38.85 13/8 .46 48.30 11/2 .55 57.75 13/4 .76 79.80 2 1.04 109.20
3/4 x 1 .14 14.70 11/8 .21 22.05 11/4 .30 31.50 13/8 .40 42.00 11/2 .49 51.45 15/8 .58 60.90 13/4 .70 73.50 17/8 .81 85.05 2 .93 97.65 21/4 1.21 127.05 21/2 1.51 158.55 23/4 1.90 199.50 21/8 1.08 113.40
1 x 11/4 .19 19.95 13/8 .27 28.35 11/2 .37 38.85 15/8 .48 50.40 13/4 .58 60.90 17/8 .70 73.50 2 .82 86.10 21/8 .97 101.85 21/4 1.12 117.60 23/8 1.27 133.35 21/2 1.40 147.00 23/4 1.76 184.80 3 2.14 224.70 31/4 2.54 266.70 31/2 2.92 306.60 4 4.04 424.20
11/4 x 11/2 .23 24.15 15/8 .33 34.65 13/4 .44 46.20 17/8 .57 59.85 2 .68 71.40 21/8 .83 87.15 21/4 .97 101.85 23/8 1.14 119.70 21/2 1.27 133.37 25/8 1.47 154.35 23/4 1.65 173.25 27/8 1.82 191.10 3 2.04 214.20 31/4 2.41 253.05 31/2 2.85 299.25 4 3.93 412.65
11/2 x 13/4 .27 28.35 17/8 .39 40.95 2 .51 53.55 21/8 .66 69.30 21/4 .80 84.00 23/8 .95 99.05 21/2 1.09 114.45 25/8 1.29 135.45 23/4 1.48 155.40 3 1.86 195.30 31/4 2.23 234.15 31/2 2.71 284.55 33/4 3.21 337.05 4 3.67 385.35 41/2 4.84 508.20
WT. PER LBS../ I.D. O.D. IN. 105” 13/4 x 2 .33 34.65 21/8 .46 48.30 21/4 .60 63.00 23/8 .75 78.75 21/2 .93 97.65 25/8 1.07 112.35 23/4 1.23 129.15 27/8 1.44 151.20 3 1.64 172.20 31/4 2.06 216.30 31/2 2.47 259.35 33/4 2.93 307.65 4 3.59 376.95 41/4 4.15 435.75
2 x 21/8 .31 32.55 21/4 .54 56.70 21/2 .68 71.40 25/8 .84 88.20 23/4 1.01 106.05 27/8 1.21 127.05 3 1.38 144.90 31/4 1.83 192.15 31/2 2.23 234.15 33/4 2.88 302.40 4 3.33 349.65 41/2 4.38 459.90 5 5.52 579.60 51/2 6.85 719.25 6 8.30 871.50
21/4 x 21/2 .53 55.65 25/8 .60 63.00 23/4 .74 77.70 27/8 .95 99.75 3 1.13 118.65 31/8 1.34 140.70 31/4 1.52 159.60 31/2 2.02 212.10 33/4 2.46 258.30 4 3.08 323.40 41/4 3.62 380.10
21/2 x 3 .84 88.20 31/8 1.01 106.05 31/4 1.24 130.20 31/2 1.64 172.20 33/4 2.17 227.85 4 2.81 295.05 41/4 3.26 342.30 41/2 3.73 391.65 43/4 4.67 490.35 5 5.11 536.55 51/2 6.64 697.20 6 8.19 859.95
23/4 x 31/4 .86 90.30 33/8 1.12 117.60 31/2 1.36 142.80 33/4 1.79 187.95 4 2.41 253.05 41/4 3.00 315.00 41/2 3.59 376.95 43/4 4.14 434.70 5 4.57 479.85
WT. PER LBS../ I.D. O.D. IN. 105”
3 x 33/8 .93 97.65 31/2 1.01 106.05 35/8 1.31 137.55 33/4 1.48 155.40 4 1.97 206.85 41/4 2.56 268.80 41/2 3.31 347.55 43/4 3.83 402.15 5 4.54 476.70 51/2 5.98 627.90 6 7.45 782.25 61/2 9.08 953.40
31/4 x 33/4 1.02 107.10 4 1.75 183.75 41/4 2.18 228.90 41/2 2.93 307.65 43/4 3.32 348.60 5 4.10 430.50 51/2 5.26 552.30
31/2 x 4 1.29 135.45 41/4 1.83 192.15 41/2 2.37 248.85 43/4 3.04 319.20 5 3.79 397.95 51/2 5.15 540.75 6 6.65 698.25 61/2 8.24 865.20
33/4 x 41/4 1.45 152.25 41/2 2.02 212.10 43/4 2.48 260.40 5 3.15 330.75 51/2 4.71 494.80 6 6.22 653.10
4 x 41/2 1.47 154.35 43/4 2.01 211.05 5 2.71 284.55 51/4 3.52 369.60 51/2 4.18 438.90 6 5.75 603.75 61/2 7.43 780.15 7 9.16 961.80 71/2 11.17 1,172.85 8 13.14 1,379.70
41/4 x 43/4 1.42 149.10 5 2.23 234.15 51/4 3.02 317.10 51/2 3.69 387.45 6 5.18 543.90 61/2 6.98 732.90
41/2 x 5 1.74 182.70 51/2 3.13 328.65 6 4.66 489.30 61/2 6.29 660.45 7 8.10 850.50
43/4 x 53/4 3.33 349.65 6 4.07 427.35 61/2 5.73 601.65 7 7.23 759.15
WT. PER LBS../ I.D. O.D. IN. 105”
5 x 51/2 2.01 211.05 6 3.43 360.15 61/2 5.12 537.60 7 6.92 726.60 71/2 8.79 922.95 8 10.88 1,142.40 9 15.07 1,582.35 51/4 x 7 6.20 651.00 71/2 8.12 852.60 51/2 x 61/2 3.90 409.50 7 5.61 589.05 71/2 7.48 785.40 8 9.52 999.60 53/4 x 63/4 3.98 417.90 71/2 6.71 704.55 8 8.83 927.15 81/2 10.89 1,143.45 6 x 63/4 3.14 329.70 7 4.10 430.50 71/2 5.97 626.85 8 8.13 853.65 81/2 10.26 1,077.30 9 12.49 1,311.45 61/2 x 71/2 4.40 462.00 8 6.59 691.95 9 11.01 1,156.05 7 x 8 4.78 501.90 9 9.29 975.45 8 x 9 5.80 609.00 Solid x 1/2 .08 8.40 5/8 .12 12.60 3/4 .16 16.80 7/8 .24 25.20 1 .28 29.40 11/8 .36 37.80 11/4 .45 47.25 13/8 .53 55.65 11/2 .64 67.20 15/8 .72 75.60 13/4 .80 84.00 17/8 .95 99.75 2 1.13 118.65 21/8 1.23 129.15 21/4 1.38 144.90 23/8 1.53 160.65 21/2 1.69 177.45 25/8 1.83 192.15 23/4 1.98 207.90 27/8 2.19 229.95 3 2.46 258.30 31/4 2.83 297.15 31/2 3.29 345.45 33/4 3.70 388.50 4 4.33 454.65 41/4 4.91 515.55 41/2 5.32 558.60 43/4 6.20 651.00 5 6.55 687.75 51/2 8.05 845.25 6 9.65 1,013.25 61/2 11.40 1,197.00 7 13.03 1,368.15 71/2 14.83 1,557.15 8 15.50 1,627.50 9 21.38 2,244.90 10 25.90 2,719.50
CENTRIFUGAL CAST SIZES Wt. Per ID OD In. 6 x 10 17.23 7 x 81/2 6.73 7 x 91/2 11.30 7 x 10 14.03 7 x 12 23.90
Wt. Per ID OD In. 71/2 x 81/2 6.07 71/2 x 91/2 9.50 8 x 91/2 6.26 8 x 10 10.87 8 x 101/2 12.96
Wt. Per ID OD In. 8 x 11 16.03 8 x 12 22.50 81/2 x 91/2 5.50 9 x 10 6.42 9 x 101/2 9.12
Wt. Per ID OD In. 9 x 11 11.65 9 x 12 17.50 91/2 x 101/2 7.08 10 x 11 6.44 10 x 12 12.93
Call Us For Your Aluminum Bronze Requirements
ALUMINUM & STAINLESS, INC.
– 14 –
STAINLESS STEEL SHEETS T304 / 304L T316 / T316L
T310 T410No. 2B & No. 3/PVC Finish
Width Est. Wt. Thickness and Lbs. per Length Sheet
26 Ga.-(.018”) 36 x 120 24
.756 Lb. Sq. Ft. 48 x 120 32
24 Ga.-(.024”) 48 x 120 40
1.008 Lb. Sq. Ft.
22 Ga.-(.030”) 48 x 120 50
1.260 Lb. Sq. Ft.
20 Ga.-(.036”) 36 x 120 44
1.512 Lb. Sq. Ft. 48 x 120 59
Width Est. Wt. Thickness and Lbs. per Length Sheet
18 Ga.-(.048”) 48 x 96 65
2.016 Lb. Sq. Ft. 48 x 120 81
16 Ga.-(.060”) 48 x 96 81
2.520 Lb. Sq. Ft. 48 x 120 101
60 x 120 126
14 Ga.-(.075”) 48 x 120 126
3.150 Lb. Sq. Ft.
Width Est. Wt. Thickness and Lbs. per Length Sheet
12 Ga.-(.105”) 48 x 120 176
4.410 Lb. Sq. Ft.
11 Ga.-(.120”) 48 x 120 202
5.050 Lb. Sq. Ft. 60 x 120 252
10 Ga.-(.135”) 48 x 120 227
5.670 Lb. Sq. Ft. 60 x 120 284
STAINLESS STEEL PLATE
3/16”-(.188”)8.579 Lb. Sq. Ft.
1/4”-(.250”)11.162 Lb. Sq. Ft
5/16”-(.313”)13.746 Lb. Sq. Ft.
3/8”-(.375”)16.496 Lb. Sq. Ft
1/2”-(.500”)21.663 Lb. Sq. Ft
5/8”-(.625”)26.831 Lb. Sq. Ft.
T304 / 304L T316 / T316L
Thickness – 3/16” Thru 2”
Widths – 48” Thru 96”
Lengths – 240” R/L
T31OS T41OS
Thickness – 3/16” Thru 1/2”
Widths – 48” Thru 96”
Lengths – 240” R/L
3/4”-(.750”)32.123 Lb. Sq. Ft
1”-(1.00”)42.665 Lb. Sq. Ft.
11/4”-(1.250”)53.837 Lb. Sq. Ft
11/2”-(1.500”)64.328 Lb. Sq. Ft
13/4”-(1.750”)74.788 Lb. Sq. Ft
2”-(2.000”)85.330 Lb. Sq. Ft
We will shear or plasma cut to your required shape and size.Call for small or large quantities.
Lafayette New Orleans 800-252-9074 800-535-9156
– 15 –
STAINLESS STEEL ROUND RODAnnealed and Cold Drawn
10-12 Foot Random LengthsAlloys 303, 304, 316, 416, 17-4
Size Inches1/83/161/45/163/87/161/29/165/8
11/163/47/8
15/161
11/813/1611/415/1613/817/1611/215/8111/1613/417/8115/16
Wt.Per Ft.
.042
.094
.167
.262
.376
.514
.668
.8451.0431.2621.5022.0452.3472.6703.3793.7604.1734.6005.0495.5186.0087.0517.6048.1809.390
10.024
Size Inches2
21/821/423/821/225/823/427/83
31/431/233/44
41/441/25
51/26
61/27
71/28
81/29
1012
Wt.Per Ft.10.88112.06013.52015.06316.68018.40020.19522.07224.03028.20632.71237.56042.73048.23354.07568.76080.77896.140117.340130.848150.208170.903192.934216.299267.036384.500
Size Inches3/161/45/163/87/161/25/83/47/81
11/411/22
Wt.Per Ft.
.119
.214
.344
.481
.651
.8551.3301.9202.6063.4205.3107.650
13.600
Size Inches1/45/163/87/161/25/8
11/163/41
11/411/22
Wt.Per Ft.
.184
.288
.414
.564
.7371.1501.3931.6582.9454.6006.63011.780
STAINLESS STEEL SQUARE BARAnnealed and Cold Drawn
10-12 Foot Random Lengths
STAINLESS STEEL HEXAGON BARAnnealed and Cold Drawn
10-12 Foot Random Lengths
ALUMINUM & STAINLESS, INC.
– 16 –
17-4 STAINLESS BOAT SHAFTING17-4 PH CONDITION H1150
Also Available 19 & 22Straightened,Ground,&PolishedtoBoatShaftSpecifications
Length Approx Size In Wt. Per Inches Feet Foot 1 12 2.670 1 20 11/8 20 3.379 11/4 12 11/4 14 4.173 11/4 20 13/8 12 13/8 16 5.049 13/8 20 11/2 12 11/2 14 6.008 11/2 16 11/2 20 13/4 16 8.180 13/4 20 2 12 2 14 10.681 2 16
Length Approx Size In Wt. Per Inches Feet Foot 2 12 10.681 2 20 21/4 8’ 10” 21/4 11 21/4 12 21/4 16 13.520 21/4 18 21/4 20 21/2 12 21/2 14 21/2 16 16.690 21/2 18 21/2 20 3 16 3 18 24.030 3 20 3 22 31/2 16 32.712
Length Approx Size In Wt. Per Inches Feet Foot 31/2 18 31/2 19 31/2 20 32.712 31/2 22 31/2 24 35/8 18 35/8 20 35/8 22 35.090 35/8 24 35/8 28 35/8 29 4 18 4 20 42.730 4 22 4 26 41/2 26 54.13 5 26 66.760 51/2 — 80.78 6 28 96.140 6 30
STAINLESSPUMP SHAFT QUALITY ROD
TYPE 416 & 31620 Foot Lengths
Wt. Size “ Per Length 416 316
1 60 X X
13/16 77 X X
11/4 92 X X
17/16 114 X
11/2 132 X X
111/16 162 X X
13/4 172 X
115/16 224 X X
2 240 X
23/16 261 X
27/16 317 X
211/16 434 X
3 500 X
CHROME RODC1045
.0010”/Side Min. Chrome12 and 24 Foot Lengths
Wt. Wt. Size Per Length Size Per Length
1/2 .67 21/4 13.50
5/8 1.04 21/2 16.70
3/4 1.52 23/4 20.20
7/8 2.04 3 24.00
1 2.67 31/4 28.40
11/8 3.38 31/2 32.70
11/4 4.17 33/4 37.50
13/8 5.05 4 42.71
11/2 6.01 41/2 54.08
15/8 7.058 5 66.80
13/4 8.20 51/2 80.86
2 10.70 6 96.10
7 130.83
Lafayette New Orleans 800-252-9074 800-535-9156
– 17 –
STAINLESS STEEL FLAT BARHot Rolled, Annealed and Pickled
10-12 Foot Random LengthsAlloys 304, 304L, 316, 316L
Wt. Size Inches Per Ft. 1/8 x 1/2 .213 x 3/4 .319 x 1 .425 x 11/4 .531 x 11/2 .638 x 2 .850 x 21/2 1.060 x 3 1.280 x 4 1.700
3/16 x 1 .638 x 11/4 .797 x 11/2 .957 x 2 1.280 x 3 1.910 x 31/2 2.237 x 4 2.550
Wt. Size Inches Per Ft. 1/4 x 1/2 .425 x 3/4 .636 x 1 .850 x 11/4 1.060 x 11/2 1.280 x 2 1.700 x 21/2 2.120 x 3 2.550 x 4 3.400 x 6 5.105 x 8 6.810
3/8 x 1 1.280 x 11/4 1.594 x 11/2 1.920 x 2 2.550 x 3 3.830 x 4 5.100 x 6 7.657
Wt. Size Inches Per Ft. 1/2 x 1 1.700 x 11/4 2.125 x 11/2 2.550 x 2 3.400 x 21/2 4.250 x 3 5.100 x 4 6.800 x 6 10.210
3/4 x 2 5.100 x 3 7.650 x 4 10.200
1 x 2 6.800 x 3 10.200 x 4 13.600
STAINLESS STEEL ANGLES20 Foot Random Lengths
304,304L, 316, 316L Wt. Size Inches Per Ft.
3/4 x 3/4 x 1/8 .59 1 x 1 x 1/8 .80 3/16 1.16 1/4 1.49 11/4 x 11/4 x 1/8 1.01 3/16 1.48 1/4 1.92 11/2 x 11/2 x 1/8 1.23 3/16 1.80 1/4 2.34 2 x 2 x 1/8 1.65 3/16 2.44 1/4 3.19 3/8 4.70
21/2 x 21/2 x 3/16 3.07 1/4 4.10 3/8 5.86 3 x 3 x 1/4 4.90 3/8 7.20 4 x 4 x 1/4 6.60 3/8 9.57 1/2 12.80
WE CAN SHEAR FLAT BARTHRU 1/2” THICK IN144” LENGTHS TO
MEET YOURSPECIAL REQUIREMENTS
Also Stocking:STAINLESS STEEL
INTERNAL / EXTERNAL DOOR DOGS
ALUMINUM & STAINLESS, INC.
– 18 –
STAINLESS STEEL PIPEFull Finish - Annealed and Pickled
17-24 Foot Random LengthsASTM A312
Alloys 304, 304L, 316, 316L
SCHEDULE 10, I.P.S. Wall Pipe Size O.D. Thickness Lbs. Per Inches Inches Inches Foot 1/2 .840 .083 .671 3/4 1.050 .083 .857 1 1.315 .109 1.404 11/4 1.660 .109 1.806 11/2 1.900 .109 2.085 2 2.375 .109 2.638 21/2 2.875 .120 3.531 3 3.500 .120 4.332 4 4.500 .120 5.613 5 5.563 .134 7.770 6 6.625 .134 9.289 8 8.625 .148 13.400 10 10.750 .165 18.650 12 12.750 .180 24.200 20 20.000 .218 46.270
*Available in Seamless and Welded
SCHEDULE 40 (STD), I.P.S. Wall Pipe Size O.D. Thickness Lbs. Per Inches Inches Inches Foot 1/4 .540 .088 .425 3/8 .675 .091 .565 1/2 .840 .109 .851 3/4 1.050 .113 1.131 1 1.315 .133 1.679 11/4 1.660 .140 2.273 11/2 1.900 .145 2.718 2 2.375 .154 3.653 21/2 2.875 .203 5.793 3 3.500 .216 7.576 31/2 4.000 .226 9.110 4 4.500 .237 10.790 5 5.563 .258 14.620 6 6.625 .280 18.970 8 8.625 .322 28.550 10 10.750 .365 40.480 12 12.750 .406 53.530 20 20.000 .593 122.909
SCHEDULE 80, I.P.S. Wall Pipe Size O.D. Thickness Lbs. Per Inches Inches Inches Foot 1/4 .540 .119 .54 3/8 .675 .128 .74 1/2 .840 .147 1.09 3/4 1.050 .154 1.47 1 1.315 .179 2.17 11/4 1.660 .191 3.00 11/2 1.900 .200 3.63 2 2.375 .218 5.02 21/2 2.875 .276 7.66 3 3.500 .300 10.25 31/2 4.000 .318 12.51 4 4.500 .337 14.98 6 6.625 .432 28.57 8 8.625 .500 43.39
STAINLESS STEEL TUBINGFull Finish - Annealed and Pickled
17-24 Foot Straight Random LengthsVarious Alloys Available
STAINLESS STRUCTURAL TUBING20 Foot Lengths
MILL FINISH Wall Size Thickness 1/2 x 1 .065 3/4 x 3/4 .065 3/4 x 3/4 .120 1 x 1 .065 1 x 1 .120 1 x 11/2 .120 11/4 x 11/4 .065 11/4 x 11/4 .120
Wall Size Thickness 11/2 x 11/2 .065 11/2 x 11/2 .120 11/2 x 11/2 .180 2 x 2 .065 2 x 2 .120 2 x 2 .188 2 x 2 .250 21/2 x 21/2 .120 3 x 3 .120
POLISHED TUBING AVAILABLE IN ALL SIZES
Larger Sizes Available
Wall Diameter Thickness 1/4 .065 3/8 .035 1/2 .035 5/8 .065 5/8 .120 3/4 .049 3/4 .065 7/8 .065
Wall Diameter Thickness 1 .065 11/4 .049 11/4 .065 11/2 .049 11/2 .065 15/8 .065 13/4 .250
Wall Diameter Thickness 2 .065 2 .120 2 .250 3 .065 31/4 .375 4 .188 41/2 .250
Lafayette New Orleans 800-252-9074 800-535-9156
– 19 –
CATALOGNUMBER DIMENSIONS WT/FT CATALOG
NUMBER DIMENSIONS WT/FT
KGUA200 2 x 11/4 2.370 KGUA510 5 x 3 x 3/8 9.850KGUR215 3 x 11/2 x 3/16 3.010 KGUW260 5 x 4 x 1/4 7.520KGUE220 3 x 11/2 x 1/4 3.510 KGUW265 5 x 4 x 3/8 11.150KGUA300 3 x 2 x 3/16 3.070 KGUW270 6 x 3 x 1/4 7.520KGUA310 3 x 2 x 1/4 4.100 KGUA600 6 x 3 x 3/8 11.200KGUA320 3 x 2 x 3/8 5.900 KGUA610 8 x 4 x 1/4 9.210KGUA400 4 x 3 x 1/4 5.800 KGUA620 6 x 4 x 3/8 12.300KGUA410 4 x 3 x 3/8 8.500 K6UA630 8 x 4 x 1/2 18.200KGUA500 5 x 3 x 1/4 6.680
UNEQUAL LEG STAINLESS ANGLE BARS20 Foot Random Length*
To Specs: QQS-ASTM-ASME-AMS Grades: T304/304L and T316/316L
STAINLESS STEEL BEAMS20 Foot Random Length*
To Specs: QQS-ASTM-ASME-AMS Grades: T304/T304L and T316/T316L
CATALOGNUMBER NOMINAL SIZE WT/FT DEPTH OF
SECTIONFLANGEWIDTH
FLANGETHICKNESS
WEBTHICKNESS
KGSB300 3” (3S @ 5.7) 6.330 3.000 2.330 0.260 0.170KGSB400 4” (4S @ 7.7) 8.850 4.000 2.663 0.293 0.193
4” 4.000 2.663 0.437 0.250KGSB600 6” (6S @ 12.5) 14.200 6.000 3.332 0.359 0.232KGSB620 6” (6S @ 17.25) 19.600 6.000 3.559 0.401 0.465
Wide Range Beams
KGWB420 4” (4W @ 13) 14.400 4.160 4.060 0.345 0.280KGWB620 6” (6W @ 12) 14.400 6.030 4.000 0.280 0.232
Extruded Shapes
KGSB310 3” 7.610 3.000 2.375 0.187 0.250KQSB410 4” 9.250 4.000 2.750 0.190 0.250KGSB500 5” 12.510 5.000 3.000 0.201 0.326KGSB610 6” 16.930 6.000 3.332 0.220 0.359
Welded Shapes
KGSB630W 150 x 150 x 8 x 10mm 22.200 5.910 5.910 0.315 0.394KGWB630 6” 22.000 5.910 5.910 0.394 0.315KGWB800 8” 34.470 7.874 7.874 0.472 0.314
ALUMINUM & STAINLESS, INC.
– 20 –
STAINLESS I-BEAM - Dimensions & Specifications20 Foot Random Lengths
CHARACTERISTICS OF SECTION
CatalogNumber
Size (mm)H x D x Web x FI Thk
UnitWeight
Position of Centerof Gravity
cm
SectionalAreacm^2
Momentof Inertia
cm^4
Moment ofResistance
cm^3
Radius ofGyration
cmKG/m Cx Cy A Ix ly Wx Wy Ix ly
KGSB300 76.2 x 59.2 x 4.3 x 6.6 7.8 0 0 9.74 95.48 17.64 25.06 5.96 3.13 1.35KGSB310 76.2 x 60.3 x 6.35 x 9.5 10.2 0 0 12.72 115.45 21.56 30.30 7.15 3.01 1.30KGSB400 101.6 x 67.6 x 4.9 x 7.4 10.4 0 0 12.91 223.12 27.43 43.92 8.11 4.16 1.46KGSB410 101.6 x 69.85 x 6.35 x 9.0 10.2 0 0 15.68 257.73 33.51 50.73 9.59 4.05 1.46KGSB500 127 x 76.2 x 8.3 x 10.8 17.2 0 0 21.52 527.57 48.49 83.08 12.73 4.95 1.50KGSB600 152.4 x 84.6 x 5.9 x 9.1 16.6 0 0 20.73 793.65 64.05 104.15 15.14 6.19 1.76KGSB610 152.4 x 84.6 x 9.12 x 11.91 22.0 0 0 27.52 958.68 73.08 125.81 17.28 5.90 1.63KGSB620 152.4 x 90.4 x 11.6 x 10.18 26.4 0 0 33.59 1129.69 111.38 148.25 24.64 5.80 1.82KQWB420 105.7 x 103.1 x 7.1 x 8.8 20.0 0 0 25.04 477.21 169.44 90.38 30.96 4.36 2.52KQWB620 153.2 x 101.6 x 5.9 x 7.1 18.4 0 0 22.97 924.17 122.77 120.65 24.17 6.34 2.31
KGWB630w* 150 x 150 x 8 x 10 31.9 0 0 41.03 1640 563 219 75.1 6.33 3.71KQWB800w* 200 x 200 x 8 x 12 49.0 0 0 62.71 4660 1600 466 160 8.62 5.05
CatalogNumber Inch Conversion #/feet Description
KGSB300 3 x 2.331 x .169 x .260 5.24 [email protected]/ftProfileKGSB310 3 x 2.375 x .250 x .374 6.85 Proprietary SizeKGSB400 4 x 2.661 x .193 x .291 6.99 [email protected]/ftProfileKGSB410 4 x 2.750 x .250 x .190 6.85 Proprietary SizeKGSB500 5 x 3 x .326 x .425 11.56 Proprietary SizeKGSB600 6 x 3.331 x .232 x .358 11.15 [email protected]/ftProfileKGSB610 6 x 3.332 x .359 x .469 14.78 Proprietary SizeKGSB620 6 x 3.559 x .465 x .401 17.74 [email protected]/ftProfileKQWB420 4.160 x 4.060 x .280 x .345 13.44 W4@13lbs/ftProfileKGWB620 6.030 x 4.000 x .232 x .280 12.36 W6@12lbs/ftProfile
KGWB630w* 5.91 x 5.91 x .315 x .394 21.43 Welded SectionKGWB800w 7.874 x 7.874 x .315 x .472 32.92 Welded Section
b2b1
b1-b22c=
t2
t2
t2
t2
t1
iyiy ix
ix
B
H x x
Y
Y
ex
ey
Weight Discaimer: “WT/FT shown for all extruded shapes is calculated based on tolerances given in ASTM A484 factored to the PLUS side. These shapes are in 20’/25’ random lengths.”
w*: Welded Sections
Lafayette New Orleans 800-252-9074 800-535-9156
– 21 –
STAINLESS STEEL CHANNELS20 Foot Random Lengths
To Specs: QQS-ASTM-ASME-AMS Grades: T304/T304L and T316/T316L
CATALOGNUMBER NOMINAL SIZE WT/FT DEPTH OF
SECTIONFLANGEWIDTH
WEBTHICKNESS
KGCE330 3”([email protected]) 4.670 3.000 1.410 .170
KGCE420 4”([email protected]) 6.120 4.000 1.580 .180
KGCE430 4”([email protected]) 8.110 4.000 1.720 .320
KGCE510 5”(5@9Profile) 11.720 5.000 1.875 .375
KGCE620 6”([email protected]) 9.880 6.000 1.920 .200
KGCE630 6”([email protected]) 12.890 6.000 2.034 .314
KGCE820 8”([email protected]) 20.000 8.000 2.530 .500
Extruded Non-Tapered
KGCE210 2 x 1 x 3/16” 2.890 2.000 1.000 .188
KGCE220 2 x 1 x 1/4” 3.500 2.000 1.000 .250
KGCE310 3 x 11/2 x 3/16” 4.800 3.000 1.500 .180
KGCE320 3 x 11/2 x 1/4” 5.380 3.000 1.500 .250
KGCE500 5 x 21/2 x 1/4” 8.390 5.000 2.500 .250
KGCE600 6 x 3 x 1/4” 11.760 6.000 3.000 .250
KGGE610 6 x 3 x 3/8” 17.290 6.000 3.000 .375
Hot-Rolled Shapes-Non Tapered
KGCR300 3 x 13/8 x 3/16” 3.550 3.000 1.375 .188
KGCR400 4 x 13/4 x 1/4” 6.200 4.000 1.750 .250
KGCR410 4 x 2 x 1/4” 6.650 4.000 2.000 .250
KGCR150 40 x 20 x 3 mm 1.220 1.575 0.787 .118
KGCR200 50 x 25 x 3 mm 1.550 1.969 0.984 .118
Welded Shapes
KGWC800 8 x 4 x 1/4” 13.700 8.000 4.000 .250
KGWC810 8 x 4 x 3/8” 20.000 8.000 4.000 .375
* Center of Gravity Measurements for Extruded Sections: X = Measurement from top of Flange, Y = 1/2 of Height Measurement.
r1
r2
t
t
90 deg +/- 2 deg
H
BY
Y
r2
r2
r1
r1
t
t
t
Cy
X XH
B
ALUMINUM & STAINLESS, INC.
– 22 –
Size (mm)H x F x Web
Position of Centerof Gravity
Cm
SectionalAreacm^2
Momentof Inertia
cm^4
Moment ofResistance
crn^3
Radius ofGyration
cmCx Cy A Ix ly Zx Zy ix iy
KGCR150 40 x 20 x 3 0 0.59 2.272 5.22 0.778 2.61 0.552 1.52 0.585
KGCR200 50 x 25 x 3 0 0.715 2.872 10.6 1.6 4.26 0.896 1.92 0.746
KQCE210 50.8 x 25.4 x 4.75 1.75 2.54 4.37 2.34 15.51 1.34 6.11 0.73 1.88
KGCE220 50.8 x 25.4 x 6.35 1.71 2.54 5.58 2.83 18.66 1.65 7.35 0.71 1.83
KGCR300 76.2 x 34.52 x 4.76 0 0.996 6.55 54.8 7.04 14.4 2.82 2.89 1.04
KQCE310 76.2 x 38.1 x 4.8 2.69 3.81 6.95 8.93 58.53 3.32 15.36 1.13 2.9
KGCE320 76.2 x 38.1 x 6.35 2.65 3.81 8.97 11.21 73.43 4.23 19.27 1.12 2.86
KGCR400 101.6 x 44.45 x 6.35 0 1.25 11.43 168 19.4 33.1 6.07 3.83 1.3
KGCR410 101.6 x 50.8 x 6.35 0 1.47 12.21 186 28.2 36.6 7.81 3.9 1.52
KGCE500 127 x 63.5 x 6.35 4.56 6.35 15.33 57.4 372.77 12.59 58.7 1.93 4.93
KGCE600 152.4 x 76.2 x 6.35 5.51 7.62 18.52 101.72 658.79 18.46 86.46 2.34 5.96
KGCE610 152.4 x 76.2 x 9.5 5.38 7.62 27.27 145.3 932.47 27.01 122.37 2.31 5.85
KGWC800 203.2 x 101.6 x 6.35 0 2.72 25.36 1650 251 162 33.7 8.06 3.15
KGWC810 203.2 x 101.6 x 9.52 0 2.83 37.1 2330 353 229 48.2 7.92 3.09
KGCE330 76.2 x 35.8 x 4.3 2.45 3.81 7.56 8.27 67.02 3.38 17.59 1.05 2.98
KGCE420 101.6 x 40.2 x 4.7 2.84 5.08 10.42 13.54 163.49 4.77 32.18 1.14 3.96
KGCE430 101.6 x 43.7 x 8.1 3.18 5.08 13.89 18.44 193.56 5.8 38.1 1.15 3.73
KGCE510 127 x 47.6 x 9.5 3.46 6.35 19.6 30.87 418.52 8.92 65.91 1.25 4.62
KGCE620 152.4 x 48.8 x 5.1 3.56 7.62 15.62 29.2 550.12 8.2 72.19 1.37 5.93
KGCE630 152.4 x 51.7 x 8 3.94 7.62 19.49 34.02 611.26 8.63 80.22 1.32 5.6
Inches Conversion Description 1.57 x .787 x .118 Proprietary Size 1.97 x .984 x .118 Proprietary Size 2 x 1 x 3/16 2”Bar Channel 2 x 1 x 1/4 2”Bar Channel 3 x 1-3/8 x 3/16 Proprietary Size 3 x 1-1/2 x 3/16 3” Non-Tapered Channel 3 x 1-1/2 x 1/4 3” Non-Tapered Channel 4 x 1-3/4 x 1/4 Proprietary Size 4 x 2 x 1/4 Proprietary Size 5 x 2-1/2 x 1/4 5” Non-Tapered Channel 6 x 3 x 1/4 6” Non-Tapered Channel 6 x 3 x 3/8 6” Non-Tapered Channel 8 x 4 x 1/4 8” Non-Tapered Channel (welded) 8 x 4 x 3/8 8” Non-Tapered Channel (welded) 3x1.41x.170 [email protected]/ftProfile 4 x 1.583 x .185 C4 @ 5.4 lbs/ftProfile 4 x 1.720 x .319 C4 @ 7.25 lbs/ftProfile 5 x 1-7/8 x 3/8 C5 @ 9.0 lbs/ftProfile(close) 6 x 1.92 x .200 C6 @ 8.2 lbs/ftProfile 6 x 2.035 x .315 C6 @ 10.5 lbs/ftProfile
STAINLESS STEEL CHANNEL - Dimensions & SpecificationsCHARACTERISTICS OF SECTION
Weight Disclaimer: “WT/FT shown for all extruded shapes is calculated based on tolerances given in ASTM A484 factored to the PLUS side. These shapes are in 20’/25’ random lengths.”
Lafayette New Orleans 800-252-9074 800-535-9156
– 23 –
*Theoretical Internal Nom. Schedule Outside Wall Inside Bursting Cross-Sect. Weight Size Number Diameter Thickness Diameter Pressure Area Lb. Per (Inches) (Inches) (Inches) (Inches) (PSI) (Sq. In.) (Lineal Ft.) 10 1.050 .083 .884 11,850 .614 .857 3/4 40 1.050 .113 .824 16,142 .533 1.131 80 1.050 .154 .742 22,000 .432 1.474 10 1.315 .109 1.097 12,415 .945 1.404 1 40 1.315 .133 1.049 15,171 .864 1.679 80 1.315 .179 .957 20,418 .719 2.172 10 1.660 .109 1.442 9,850 1.495 1.806 11/4 40 1.660 .140 1.380 12,650 1.103 2.273 80 1.660 .191 1.278 17,259 1.283 2.997 10 1.900 .109 1.682 8,600 2.222 2.085 11/2 40 1.900 .145 1.610 11,447 2.036 2.718 80 1.900 .200 1.500 15,789 1.767 3.631 10 2.375 .109 2.157 6,889 3.654 2.638 2 40 2.375 .154 2.067 9,726 3.355 3.653 80 2.375 .218 1.939 13,768 2.953 5.022 10 2.875 .120 2.635 6,260 5.453 5.531 21/2 40 2.875 .203 2.469 10,591 4.788 5.793 80 2.875 .279 2.323 14,400 4.238 7.661 10 3.500 .120 3.260 5,140 8.346 4.332 3 40 3.500 .216 3.068 9,257 7.393 7.576 80 3.500 .300 2.900 12,857 6.605 10.253 10 4.000 .120 3.760 4,500 11.100 4.973 31/2 40 4.000 .226 3.548 8,475 9.887 9.109 80 4.000 .318 3.364 11,925 8.888 12.505 10 4.500 .120 4.260 4,000 14.250 5.613 4 40 4.500 .237 4.026 7,900 12.731 10.790 80 4.500 .337 3.826 11,233 11.497 14.983 10 5.563 .134 5.295 3,610 22.020 7.770 5 40 5.563 .258 5.047 6,956 20.000 14.620 80 5.563 .375 4.813 10,111 18.194 20.778 10 6.625 .134 6.357 3,035 31.740 9.289 6 40 6.625 .280 6.065 6,340 28.890 18.970 80 6.625 .432 5.761 9,781 26.067 28.573 10 8.625 .148 8.329 2,570 54.480 13.400 8 40 8.625 .322 7.981 5,600 50.030 28.550 80 8.625 .500 7.625 8,696 45.664 43.388 10 10.750 .165 10.420 2,300 85.270 18.650 10 40 10.750 .365 10.020 5,093 78.850 40.800 80 10.750 .500 9.750 6,977 74.662 54.735 10 12.750 .180 12.390 2,120 120.570 24.160 12 40 12.750 .375 12.000 4,411 98.310 49.560 80 12.750 .500 11.750 5,882 108.434 65.415 10 14.000 .188 13.624 2,016 145.710 27.610 14 40 14.000 .375 13.250 4,018 135.320 54.570 80 14.000 .500 13.000 5,357 132.732 72.090 10 16.000 .188 15.624 1,763 191.620 31.620 16 40 16.000 .375 15.250 3,516 176.720 62.580 80 16.000 .500 15.000 4,688 176.715 82.770
DIMENSIONS, WEIGHTS AND PRESSURES FOR SEAMLESS STAINLESS STEEL PIPESCHEDULE 10S, 40S, 80S
FOR CALCULATING APPROXIMATEBURST PRESSURES FOR 300SERIES STAINLESS PIPE OR
TUBING, USE THIS FORMULA:
Based on formula P = 2f f = Fiber d = Outside P = Pressure in pounds per square inch t = Thickness of wall in inches (f = 75,000 for 300 series stainless)
t d
*BURSTING PRESSURE BASED ON FIBER STRESS 0F 75,000
ALUMINUM & STAINLESS, INC.
– 24 –– 24 –
CAST IRONContinuous Cast Gray Iron Bar Stock
Round Solid Bars 6’0” LongCenterless Ground + .010 - .000 Sizes up to 6” (incl.)
Sizes over 6” are “AS CAST” with 1/8” machiningallowance to provide clean finishes to the listed size
Diam- Weight Weight Per eter Per Foot 6 Foot Bar 3/4 1.70 10.2 7/8 2.30 13.8 1 2.90 17.4 11/8 3.60 21.6 11/4 4.40 26.4 13/8 5.30 31.8 11/2 6.20 37.2 15/8 7.20 43.2 13/4 8.30 49.8 17/8 9.50 57.0 2 10.70 64.2 21/8 12.20 73.2 21/4 13.60 81.6 23/8 15.10 90.6 21/2 16.70 100.2 25/8 18.30 109.8 23/4 20.00 120.0
Diam- Weight Weight Per eter Per Foot 6 Foot Bar 27/8 21.80 130.8 3 23.70 142.2 31/8 25.90 155.4 31/4 27.90 167.4 33/8 30.00 180.0 31/2 32.20 193.2 35/8 34.50 207.0 33/4 36.80 220.8 4 41.70 250.2 41/4 47.20 283.2 41/2 52.80 316.8 43/4 58.60 351.6 5 64.70 388.2 51/4 71.60 429.6 51/2 78.40 470.4 53/4 85.40 512.4 6 92.80 556.8
Diam- Weight Weight Per eter Per Foot 6 Foot Bar 61/4 101.00 606.0 61/2 109.0 654.0 63/4 117.3 703.8 7 126.0 756.0 71/4 135.6 813.6 71/2 144.9 869.4 73/4 154.5 927.0 8 164.4 986.4 81/4 175.6 1053.6 81/2 186.2 1117.2 83/4 197.0 1182.0 9 208.1 1248.6 91/4 221.3 1327.8 91/2 233.1 1398.6 10 257.7 1546.2 11 318.5 1911.0 12 387.9 2327.4
ACCESSORIESSpace limitations preclude a complete listing in this catalog of all the items we call accessories. Please review these six pages for a sample of our stock; we hope you will call on us if we may be of service.Among these useful items are - Anodes Fasteners Hollaender Fittings Thread Rod Door Dogs Fittings Lead Sheet & Billet Valves Ductile Iron Flanges Plastic Pipe Plugs Welding Rod & Wire Expanded Metal Hinges Shim Stock Wire Cloth
Stanchion Tops
Cast Rope Well11/4 Dia. Round
Fits 6” x 11”
Cast Rope Spool1” Dia Pulley
Fits 5” Pipe
Fits 4” Pipe
– 25 –
Dimensions of Seamless Weld Fittings
A
A90 LONG RAD
WeldELL
Nom.PipeSize
PipeO.D.
WALL THICKNESS
A B K D V EF
GNomPipeSize
*1LightWall
Sch20
Sch30
*2
StdSch40
Sch60
*3X-Stg
Sch80
Sch100
Sch120
Sch140
Sch160
XX-Stg ASA MSS
1/23/41
11/411/2
.8401.0501.3151.6601.900
.083
.083
.109
.109
.109
...
...
...
...
...
...
...
...
.109
.113
.133
.140
.145
.109
.113
.133
.140
.145
...
...
...
...
...
.147
.154
.179
.191
.200
.147
.154
.179
.191
.200
...
...
...
...
...
...
...
...
...
...
...
...
.188
.219
.250
.250
.281
.294
.308
.358
.382
.400
11/211/811/217/821/4
5/87/167/81
11/8
17/8111/1623/1623/431/4
...
...1
11/411/2
...
...15/821/1627/16
111/211/211/211/2
33444
22222
13/8111/16
221/227/8
1/23/41
11/411/2
221/23
31/2
2.3752.8753.5004.000
.109
.120
.120
.120
...
...
...
...
...
...
...
...
.154
.203
.216
.226
.154
.203
.216
.226
...
...
...
...
.218
.276
.300
.318
.218
.276
.300
.318
...
...
...
...
...
...
...
...
...
...
...
...
.344
.375
.438...
.436
.552
.600
.636
333/441/251/4
13/813/42
21/4
43/1653/1661/471/4
221/23
31/2
33/16315/1643/451/2
11/211/22
21/2
6666
21/221/221/23
35/841/85
51/2
221/23
31/2
4568
4.5005.5636.6258.625
.120
.134
.134
.148
...
...
....250
...
...
....277
.237
.258
.280
.322
.237
.258
.280
.322
...
...
....406
.337
.375
.432
.500
.337
.375
.432
.500
...
...
....594
.438
.500
.562
.719
...
...
....812
.531
.625
.719
.906
.674
.750
.864
.875
671/29
12
21/231/833/45
81/4105/16125/16165/16
4568
61/473/495/16
125/16
21/23
31/24
6888
33
31/24
63/1675/1681/2105/8
4568
10121416
10.75012.75014.00016.000
.165
.180
.250
.250
.250
.250
.312
.312
.307
.330
.375
.375
.365
.375
.375
.375
.365
.406
.438
.500
.500
.562
.594
.656
.500
.500
.500
.500
.594
.688
.750
.844
.719
.844
.9381.031
.8441.0001.0941.219
1.0001.1251.2501.438
1.1251.3121.4061.594
1.0001.000
...
...
15182124
61/471/283/410
203/8243/82832
10121416
153/8183/82124
56
61/27
10101212
56......
123/415
161/4181/2
10121416
18202430
18.00020.00024.00030.000
.250
.250
.250
.312
.312
.375
.375
.500
.438
.500
.562
.625
.375
.375
.375
.375
.562
.594
.688...
.750
.812
.969...
.500
.500
.500
.500
.9381.0311.219
...
1.1561.2811.531
...
1.3751.5001.812
...
1.5621.7502.062
...
1.7811.9692.344
...
...
...
...
...
27303645
111/4121/215
181/2
36404860
18202430
27303645
89
101/2101/2
121212...
...
...
...
2123
271/4...
18202430
36 *442 *4
36.00042.000
.312...
.500...
.625...
.375
.375.750
.........
.500
.500......
...
.........
...
.........
...
...5463
221/226
...
...3648
54...
101/212
...
.........
...
...36 *142 *1
S T R A I G H T T E EC
C C
NomPipeSize
Outlet C M H3/4 3/4
1/211/811/8
...11/8
...11/2
113/41/2
11/211/211/2
...11/211/2
...22
11/411/413/41/2
17/817/817/817/8
...17/817/817/8
...222
11/2
11/211/413/41/2
21/421/421/421/421/4
...21/421/421/421/4
...21/221/221/221/2
2
211/211/413/4
21/221/221/221/221/2
...23/821/42
13/4
...3333
21/2
21/22
11/211/41
33333
...23/425/821/221/4
...31/231/231/231/2
3
321/22
11/211/4
33/833/833/833/833/8
...31/43
27/823/4
...31/231/231/231/2
31/2
31/23
21/22
11/2
33/433/433/433/433/4
...35/831/231/431/8
...4444
NomPipeSize
Outlet C M H
4
431/23
21/22
11/2
41/841/841/841/841/841/8
...4
37/833/431/233/8
...44444
5
54
31/23
21/22
47/847/847/847/847/847/8
...45/841/243/841/441/8
...55555
6
654
31/23
21/2
55/855/855/855/855/855/8
...53/851/85
47/843/4
...51/251/251/251/251/2
8
8654
31/2
77777
...65/863/861/86
...6666
10
108654
81/281/281/281/281/2
...8
75/871/271/4
...7777
12
1210865
1010101010
...91/29
85/881/2
...8888
NomPipeSize
Outlet C M H
14
14121086
1111111111
...105/8101/893/493/8
...13131313
16
1614121086
121212121212
...12
115/8111/8103/4103/8
...1414141414
18
18161412108
131/2131/2131/2131/2131/2131/2
...1313
125/8121/8113/4
...1515151515
20
2018161412108
15151515151515
...141/21414
135/8131/8123/4
...202020202020
24 *4
24201816141210
17171717171717
...17
161/21616
155/8151/8
...202020202020
NomPipeSize
Outlet C M H
30 *4
302420181614
222222222222
...2120
191/21919
...2424242424
36 *4
363024201816
261/2261/2261/2261/2261/2261/2
...252423
221/222
...2424242424
42 *4
4236302420
3030303030
...28282626
...24242424
NOTES: 1. Light Wall thicknesses are identical to stainless steel Schedule 10S in sizes thru 12”, and to Schedule 10 in. sizes 14” and larger. 2. Standard Wall thicknesses are identical to stainless steel Schedule 40S in sizes thru 12”. 3. Extra Strong Wall thicknesses are identical to stainless steel Schedule 80S in sizes thru 12”. 4. May be of welded pipe, x-rayed and stress-relieved. 5. Other types, sizes and thicknesses offittingsareavailable.
A
A90 REDUCINGL.R. WeldELL
B
B
45 LONGRAD.
WeldELL
K
AA180º LONG RADIUS
WeldELL
D
D90 SHOR T RAD
WeldELL
D D
V
180 SHOR T RADWeldELL
E
CAP LAP JOINTSTUB END
G
F
R E D U C I N G T E EM
C C
HC O N C E N T R I CR E D U C E R HE C C E N T R I C
R E D U C E R
ALUMINUM & STAINLESS, INC.
– 26 –
Dimensions of ANSI Forged Flanges
W E L D N E C K F L A N G E * 1
CY
O
Nom.PipeSize
150 LB. FLANGES 300 LB. FLANGES 400 LB. FLANGES
Nom.PipeSizeO C*2 Weld
Neck
Y*2
Slip On
Thrd.
LapJoint
BoltCircle
No. andSize of
Holes
O C*2 WeldNeck
Y*2
Slip On
Thrd.
LapJoint
BoltCircle
No. andSize of
Holes
O C*2 WeldNeck
Y*2
Slip On
Thrd.
LapJoint
BoltCircle
No. andSize of
Holes1/23/41
11/411/2
31/237/841/445/85
7/161/29/165/8
11/16
17/821/1623/1621/427/16
5/85/8
11/1613/167/8
5/85/8
11/1613/167/8
23/823/431/831/233/8
4-5/84-5/84-5/84-5/84-5/8
33/445/847/851/461/8
9/165/8
11/163/4
13/16
21/1621/427/1629/16211/16
7/81
11/1611/1613/16
7/81
11/1611/1613/16
25/831/431/237/841/2
4-5/84-3/44-3/44-3/44-7/8
33/445/847/851/461/8
9/165/8
11/1613/167/8
21/1621/427/1625/823/4
7/81
11/1611/811/4
7/81
11/1611/811/4
25/831/431/237/841/2
4-5/84-3/44-3/44-3/44-7/8
1/23/41
11/411/2
221/23
31/24
67
71/281/29
3/47/8
15/1615/1615/16
21/223/423/4213/16
3
111/813/1611/415/16
111/813/1611/415/16
43/451/267
71/2
4-3/44-3/44-3/4 8-3/48-3/4
61/271/281/49
10
7/81
11/813/1611/4
23/43
31/833/1633/8
15/1611/2111/1613/417/8
15/1611/2111/1613/417/8
557/865/871/477/8
8-3/48-7/88-7/88-7/88-7/8
61/271/281/49
10
111/811/413/813/8
27/831/831/433/831/2
17/1615/8113/16115/16
2
17/1615/8113/16115/16
2
557/865/871/477/8
8-3/48-7/88-7/88-18-1
221/23
31/24
568
1012
1011
131/21619
15/161
11/813/1611/4
31/231/244
41/2
17/1619/1613/4115/1623/16
17/1619/1613/4115/1623/16
81/291/2113/4141/417
8-7/88-7/88-7/812-112-1
11121/215
171/2201/2
13/817/1615/817/82
37/837/843/845/851/8
221/1627/1625/827/8
221/1627/1633/44
91/4105/813
151/4173/4
8-7/812-7/812-1
16-11/816-11/4
11121/215
171/2201/2
11/215/817/821/821/4
441/1645/847/853/8
21/821/4211/1627/831/8
21/821/4211/16
441/4
91/4105/813
151/4173/4
8-112-1
12-11/816-11/416-13/8
568
1012
1416182024
21231/225
271/232
13/817/1619/16111/1617/8
55
51/2511/16
6
21/421/2211/1627/831/4
31/837/16313/1641/1643/8
183/4211/4223/425
291/2
12-11/816-11/816-11/420-11/420-13/8
23251/228
301/236
21/821/423/821/223/4
55/853/461/463/865/8
331/431/233/443/16
43/843/451/851/26
201/4221/2243/42732
20-11/420-13/824-13/824-13/824-15/8
23251/228
301/236
23/821/225/823/43
57/86
61/265/867/8
35/16311/1637/84
41/2
45/85
53/853/461/4
201/4221/2243/42732
20-13/820-11/224-11/224-15/824-17/8
1416182024
3036
383/446
21/823/8
51/853/8
31/233/4
...
...36
423/428-13/832-15/8
4350
35/841/8
81/491/2
81/491/2
...
...391/446
28-17/832-21/8
4350
441/2
85/897/8
85/897/8
...
...391/446
28-21/832-21/8
3036
600 LB. FLANGES 900 LB. FLANGES 1500 LB. FLANGES1/23/41
11/411/2
33/445/847/851/461/8
9/165/8
11/1613/167/8
21/1621/427/1625/823/4
7/81
11/1611/811/4
7/81
11/1611/811/4
25/831/431/237/841/2
4-5/84-3/44-3/44-3/44-7/8
43/451/857/861/47
7/81
11/811/811/4
23/823/427/827/831/4
11/413/815/815/813/4
11/413/815/815/813/4
31/431/24
43/847/8
4-7/84-7/84-14-1
4-11/8
43/451/857/861/47
7/811/811/811/811/4
23/823/427/827/831/4
11/413/815/815/813/4
11/413/815/815/813/4
31/431/24
43/847/8
4-7/84-7/84-14-1
4-11/8
1/23/41
11/411/2
221/23
31/24
61/271/281/49
103/4
111/811/413/811/2
27/831/831/433/84
17/1615/8113/16115/1621/8
17/1615/8113/16115/1621/8
557/865/871/481/2
8-3/48-7/88-7/88-18-1
81/295/891/2...
111/2
11/215/811/2...13/4
441/84...41/2
21/421/221/8...23/4
21/421/221/8...23/4
61/271/271/2...91/4
8-18-11/88-1...
8-11/4
81/295/8
101/2...
121/4
11/215/817/8...21/8
441/845/8...47/8
21/421/227/8...
39/16
21/421/227/8...
39/16
61/271/28...91/2
8-18-11/88-11/4
...8-13/8
221/23
31/24
568
1012
1314
161/22022
13/417/823/1621/225/8
41/245/851/46
61/8
23/825/83
31/835/8
23/825/83
43/845/8
101/2111/2133/417
191/4
8-11/812-11/812-11/416-13/820-13/8
133/415
181/2211/224
223/1621/223/431/8
551/263/871/477/8
31/833/84
41/445/8
31/833/841/25
55/8
11121/2151/2181/221
8-13/812-11/412-11/216-11/220-11/2
143/4151/21923
261/2
27/831/435/841/447/8
61/863/483/810
111/8
41/8411/1655/861/471/8
41/8411/1655/87
85/8
111/2121/2151/219
221/2
8-15/812-11/212-13/412-2
16-21/8
568
1012
1416182024
233/427
291/43237
23/43
31/431/24
61/27
71/471/28
311/1643/1645/85
51/2
551/26
61/271/4
203/4233/4253/4281/233
20-11/220-15/820-13/424-13/424-2
251/4273/431
333/441
33/831/24
41/451/2
83/881/29
93/4111/2
51/851/46
61/48
61/861/271/281/4
101/2
22241/427
291/2351/2
20-15/820-13/420-2
20-21/820-25/8
291/2321/236
383/446
51/453/463/878
113/4121/4127/81416
...
...
...
...
...
91/2101/4107/8111/213
25273/4301/2323/439
16-23/816-25/816-27/816-31/816-35/8
1416182024
3036
441/2513/4
41/247/8
93/4111/8
93/4111/8
...
...401/447
28-21/828-25/8
481/2571/2
57/863/4
121/4141/4
121/4141/4
...
...423/4503/4
20-31/820-35/8
...
.........
...
.........
...
.........
...
...3036
2500 LB. FLANGES1/23/41
11/411/2
51/451/261/471/48
13/1611/413/811/213/4
27/831/831/233/443/8
19/16111/1617/821/1623/8
19/16111/1617/821/1623/8
31/233/441/451/853/4
4-7/84-7/84-1
4-11/84-11/4
221/2345
91/4101/21214
161/2
221/425/83
35/8
555/865/871/29
23/431/835/841/451/8
23/431/835/841/451/8
63/473/49
103/4123/4
8-11/88-11/48-13/88-15/88-17/8
68
1012
19213/4261/230
41/45
61/271/4
103/4121/2161/2181/4
679
10
679
10
141/2171/4211/4243/8
8-21/812-21/812-25/812-27/8
WELDING NECK FLANGE BORES *1 *3
Nom.PipeSize
OutsideDiam.
LightWall
Sched.20
Sched.30
Std.Wall
Sched.40
Sched.60
ExtraStrong
Sched.80
Sched.100
Sched.120
Sched.140
Sched.160
DoubleExtra
Strong1/23/41
0.8401.0501.315
0.6740.8841.097
...
...
...
...
...
...
0.6220.8241.049
0.6220.8241.049
...
...
...
0.5460.7420.957
0.5460.7420.957
...
...
...
...
...
...
...
...
...
0.4640.6120.815
0.2520.4340.599
11/411/22
1.6601.9002.375
1.4421.6822.157
...
...
...
...
...
...
1.3801.6102.067
1.3801.6102.067
...
...
...
1.2781.5001.939
1.2781.5001.939
...
...
...
...
...
...
...
...
...
1.1601.3381.687
0.8961.1001.503
21/23
31/2
2.8753.5004.000
2.6353.2603.760
...
...
...
...
...
...
2.4693.0683.548
2.4693.0683.548
...
...
...
2.3232.9003.364
2.3232.9003.364
...
...
...
...
...
...
...
...
...
2.1252.624
...
1.7712.3002.728
4568
4.5005.5636.6258.625
4.2605.2956.3578.329
...
...
...8.125
...
...
...8.071
4.0265.0476.0657.981
4.0265.0476.0657.981
...
...
...7.813
3.8264.8135.7617.625
3.8264.8135.7617.625
...
...
...7.437
3.6244.5635.5017.187
...
...
...7.001
3.4384.3135.1876.813
3.1524.0634.8976.875
10121416
10.75012.75014.00016.000
10.42012.39013.50015.500
10.25012.25013.37615.376
10.13612.09013.25015.250
10.02012.00013.25015.250
10.02011.93813.12415.000
9.75011.62612.81214.688
9.75011.75013.00015.000
9.56211.37412.50014.312
9.31211.06212.12413.938
9.06210.75011.81413.564
8.75010.50011.50013.124
8.50010.12611.18812.812
8.75010.750
...
...182024
18.00020.00024.000
17.50019.50023.500
17.37619.25023.250
17.12419.00022.876
17.25019.25023.250
16.87618.81222.624
16.50018.37622.062
17.00019.00023.000
16.12417.93821.562
15.68817.43820.938
15.25017.00020.376
14.87616.50019.876
14.43816.06219.312
...
...
...303642
30.00036.00042.000
29.37635.376
...
29.00035.000
...
28.75034.750
...
29.25035.25041.250
...34.500
...
...
...
...
29.00035.00041.000
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
NOTES:1. Always specify bore when ordering.2. Includes 1/16” raised face in 150 lb. and 300 lb standards. Does not include 1/4” raised face in 400 lb. and heavier standards.3. Inside pipe diameters are also provided by this table.4. Other types, sizes and facings on application.5. Light Wall diameters are identical to stainless steel Schedule 10S in sizes thru 12”, and to Schedule 10 in sizes 14” and larger.
CO
Y
S L I P - O N F L A N G E
CO
Y
T H R E A D E D F L A N G E
CO
Y
L A P J O I N T F L A N G E
CO
B L I N D F L A N G E
Lafayette New Orleans 800-252-9074 800-535-9156
– 27 –
WELD WIRE Aluminum: Stainless: Alloy - 4043,5356 Alloy - 308L, 316L
Dia. - .030, .035, 3/64 Dia. - .035, .045
Roll Size - 1,12, 13, or 16 lbs Roll Size - 25lbs
Rod Size - 1/8 x 36”
HULL ANODES
PVC MAG ANODES ZINC ANODES 21/2, 5, 12, or 24 lbs 5 , 12 , or 24 lbs
ALUMINUM & STAINLESS BUTTWELD FITTINGS
ALUMINUM, BRASS AND STAINLESSTHREADED PIPE FITTINGS
C C
I.D.O.D.
T
M
I.D.
O.D.R
E
I.D.
O.D.
T
O.D.O.D.I.D.I.D.
B
T
B
A
O.D.O.D.
I.D.I.D.
T
CONCENTRIC REDUCERS
CAPS
90º LONG RADIUS ELBOW
ECCENTRIC REDUCERS
TEES
45º LONG RADIUS ELBOW
SS TIE WIRE1/16” x 5 lbs Spools
ALUMINUM & STAINLESS, INC.
– 28 –
STAINLESS HINGES, NO HOLES Open Pin Knuckle Width Length Dia. Length Pin No. Inches Inches Gauge Inches Inches Type A809 11/2 72 .040 .091 1/2 Plain A812 2 72 .050 .125 1/2 Plain A814 3 72 16 .125 1/2 Plain A806 3 72 14 .250 1 Plain
STAINLESS BUTT HINGES, NO HOLES Open Pin Width Length Dia. Pin No. Inches Inches Gauge Inches Type 3025-SS 11/2 11/2 .0625 .125 Fast 1241-SS 2 2 .0625 .125 Fast 2125-SS 3 3 .125 .250 Fast 2153-SS 4 4 .125 .250 Fast
ALUMINUM HINGES, NO HOLES Open Pin Knuckle Width Length Dia. Length Pin No. Inches Inches Gauge Inches Inches Type A702 11/2 72 .032 .091 1/4 Plain A708 2 72 .078 3/16 1/2 Plain A713 2 72 .093 1/4 1 Plain A715 3 72 .093 1/4 1 Plain A717 4 72 .093 1/4 1 Plain A723 3 72 .125 3/8 2 Plain A724 4 72 .125 3/8 2 Plain
ALUMINUM BUTT HINGES, NO HOLES Open Pin Width Length Dia. Pin No. Inches Inches Gauge Inches Type 546-A 2 2 .064 .125 Fast 546-C 3 3 .091 .1875 Fast 546-D 4 4 .125 .250 Fast
HEAVY DUTY PULL DOWN CATCHES 37/8” O.A.L.
HC207-ZINC PLATED Strikers included with above numbers
COMPRESSION SPRING CATCH WITH PADLOCK EYE HC 83314SS WITH PADLOCK EYE
No. HC-83314-42 Stainless Steel Catch Without Padlock Eye
Striker Included
NO. S3-10 LINK-LOCK NO. MSCS3 LINK-LOCK
FAST ENGAGEMENT: 180º turn locks or unlocks; positive locking
No. S3-10SS No. S3-01 Keeper Plate SS
ALUMINUM HANDLE
NH 984 AL RGHas rubber grip & handle return spring
Lafayette New Orleans 800-252-9074 800-535-9156
– 29 –
Lbs.Per100
Sq. Ft
StandardSize Street (Feet)
Design Sizes(Inches)
Opening Sizes(Inches)
Approx. StrandSize (Inches)
OverallThink-ness
(Inches)
Approx. No.Meshes Per
Ft.
Ap-prox(%)
OpenAreaSTYLE Width
SWDLengthLWD SWD LWD SWO LWO Thick-
ness Width SWD LWD
ALUMINUM / Standard
1/2” .051
1/2” .081
27
44
4 x 8
4 x 8
.50
.50
1.20
1.20
.375
.375
.937
.937
.051
.081
.093
.096
.158
.186
24
24
10
10
65
60
3/4” .051
3/4” .081 (L)
3/4” .081 (H)
3/4” .125
17
32
41
65
4 x 8
4 x 8
4 x 8
4 x 8
.92
.92
.92
.92
2.00
2.00
2.00
2.00
.812
.750
.750
.687
1.750
1.680
1.680
1.680
.051
.081
.081
.125
.109
.129
.165
.169
.200
.220
.300
.305
13
13
13
13
6
6
6
6
78
76
69
68
11/2” .081
11/2” .125
22
43
4 x 8
4 x 8
1.33
1.33
3.00
3.00
1.187
1.187
2.500
2.500
.081
.125
.128
.162
.240
.300
9
9
4
4
85
79
AbovematerialconformstoMilitarySpecificationMIL-M-17999B(MR)ClassI.
ALUMINUM EXPANDED GRATING
2.0 200 5 x 12 1.33 5.33 .94 3.44 .250 .387 .730 9 2.25 48
STAINLESS STEEL TYPE 304 / Standard
1/4” #18 119 4 x 8 .26 1.00 .130 .630 .050 .076 .135 48 12 45
1/2” #18
1/2” #16
1/2” #13
73
91
187
4 x 8
4 x 8
4 x 8
.50
.50
.50
1.20
1.20
1.20
.437
.437
.325
.937
.937
.875
.050
.062
.093
.087
.087
.119
.164
.164
.225
24
24
24
10
10
10
70
70
70
3/4” #18
3/4” #16
3/4” #13
3/4” #9(10 ga.)
48
60
91
205
4 x 8
4 x 8
4 x 8
4 x 8
.92
.92
.92
.92
2.00
2.00
2.00
2.00
.812
.812
.750
.687
1.750
1.750
1.687
1.562
.050
.062
.093
.140
.106
.106
.107
.160
.202
.202
.202
.300
13
13
13
13
6
6
6
6
85
85
80
67
11/2” #16
11/2” #13
11/2” #9(10 ga.)
45
68
137
4 x 8
4 x 8
4 x 8
1.33
1.33
1.33
3.00
3.00
3.00
1.250
1.250
1.125
2.750
2.625
2.500
.062
.093
.140
.115
.115
.155
.222
.222
.280
9
9
9
4
4
4
85
83
77
ALUMINUM / Flattened
1/2” .051F
1/2” .081F
26
42
4 x 8
4 x 8
.50
.50
1.270
1.270
.312
.312
1.000
1.000
.040
.060
.104
.105
.040
.060
24
24
9.5
9.5
61
58
3/4” .051F
3/4” .080F (L)
3/4” .081F (H)
3/4” .125F
16
30
39
62
4 x 8
4 x 8
4 x 8
4 x 8
.92
.92
.92
.92
2.125
2.125
2.125
2.125
.750
.750
.687
.625
1.812
1.750
1.750
1.750
.040
.070
.070
.095
.122
.143
.181
.187
.040
.070
.070
.095
13
13
13
13
5.7
5.7
5.7
5.7
72
70
63
62
11/2” .081F
11/2” .125F
21
41
4 x 8
4 x 8
1.33
1.33
3.150
3.150
1.062
1.000
2.750
2.750
.055
.080
.143
.181
.055
.080
9
9
3.8
3.8
77
70
AbovematerialconformstoMilitarySpecificationMIL-M-17999B(MR)ClassII
STAINLESS STEEL TYPE 304 / Flattened
1/4” #18F 111 4 x 8 .26 1.00 .110 .710 .046 .080 .046 48 11.6 40
1/2” #18F
1/2” #16F
1/2” #13F
69
86
178
4 x 8
4 x 8
4 x 8
.50
.50
.50
1.26
1.26
1.26
.312
.312
.240
1.000
1.000
.915
.040
.050
.080
.098
.099
.132
.040
.050
.080
24
24
24
9.5
9.5
9.5
60
60
57
3/4” #18F
3/4” #16F
3/4” #13F
3/4” #9F(10 ga.)
46
57
86
195
4 x 8
4 x 8
4 x 8
4 x 8
.92
.92
.92
.92
2.10
2.10
2.10
2.10
.750
.750
.625
.562
1.812
1.812
1.750
1.687
.040
.050
.070
.119
.118
.118
.120
.165
.040
.050
.070
.119
13
13
13
13
5.7
5.7
5.7
5.7
75
75
75
61
11/2” #16F
11/2” #13F
11/2” #9F(10 ga.)
43
65
131
4 x 8
4 x 8
4 x 8
1.33
1.33
1.33
3.15
3.15
3.15
1.062
1.000
.937
2.750
2.625
2.625
.050
.079
.119
.128
.130
.165
.050
.079
.119
9
9
9
3.8
3.8
3.8
80
80
75
EXPANDED METAL
WE OFFER 24 HOUR SERVICE.FOR NIGHT & WEEKEND SERVICE CALL:
LAFAYETTE 337.837.4381
LWO StrandWidth
SWD
LWD
SWO
StrandThickness
(OverallThickness)
SWO
LWO
SWD
LWD
OverallThickness
Stra
ndTh
ickn
ess
StrandWidth
– 30 –
ALUMINUM & STAINLESS, INC.
MagnesiumMagnesium AlloysTitanium (active)ZincGalvanized SteelAluminumAluminum AlloysCadmiumSteel or IronCast IronChromium-Iron (active)18-8 Stainless Steel (active)18-8-3 Stainless Steel (Moly add) (active)Carpenter 20-CB-3 (active)LeadTinNickel (active)Inconel (active)BrassCopperBronze70-30 Cupro NickelSilver SolderMonelNickel (passive)Inconel (passive)Titanium (passive)18-8 Stainless Steel (passive)18-8-3 Stainless Steel (Moly added) (passive)Carpenter 20-CB-3 (passive)SilverGraphiteZirconiumGoldPlatinum
Galvanic Corrosion
Afluidlinecanactjustlikeagalvaniccellwhentwodissimilarmetalsinelectricalcontactarejoinedbyaliquidcapableofcarry-ing an electric current. Because of the chemical reaction between oneofthemetalsandtheelectrolyte,electronsflowfromthelessnoble metal (anode) to the more noble metal (cathode). The volt-age between the metals varies with different combinations, but is always the same between any two given metals in the same electrolyte.
One metal in a galvanic system always corrodes in preference to the other. This relationship is shown for a number of metals.
The best way to avoid galvanic corrosion is to use the same type of Stainless Steel for various parts of a system having a com-mon electrolyte. For example, valve and pump parts in contact withthefluidshouldbeofthesameanalysisasthetubingorpipe.At the same time, a sharp lookout should be kept for galvanic combinations which often go unrecognized. Dissimilar metals may appear in the ground, in bearings and shafts, or may even be presentintheprocessfluidasimpurities.
PROTECTED END (cathodic, most noble) 1Stainlessis“active”inthepresenceofanycombinationofchemicalswhicharereducinganddonotallowtheformationofanoxidefilm.
2A“passive”conditionisobtainedwhenthesurfaceofastainlessparthasdevelopedaprotectiveoxidefilm.TreatingStainlessSteelsina passivatingsolutionwillacceleratetheformationofthefilm.
Galvanic Series of Metals and AlloysCORRODED END (anodic, or least noble)
DIR
ECTI
ON
OF
ATTA
CK
DIR
ECTI
ON
OF
ATTA
CK
PLEASE READ AND SIGN AGREEMENTS, TERMS AND CONDITIONS ON REVERSE SIDE. PLEASE FURNISH FINANCIAL STATEMENT WITH THIS APPLICATION.
Page 1 of 2
ALUMINUM AND STAINLESS, INC.A Reliance Steel & Aluminum Co.
P O Box 3484, Lafayette, LA 70502101 Thru-Way Park Road, Broussard, LA 70518
(337) 837-4381 or Toll Free (800) 252-9074 Fax (337) 837-5439
CREDIT APPLICATION AND AGREEMENT
Legal Name __________________________________________________________________________________________________________________
Doing Business as
Billing Address
Street / P.O. Box City State Zip Code
Street / Delivery Address
Street City State Zip Code
Telephone Facsimile ___
E-Mail Address _____________ S.I.C. Code ___
Dun & Bradstreet No. State Resale Certificate No. ___
Fed. Tax I.D. No. Parish Resale Certificate No. ___
Corporation LLC Partnership Individual Proprietorship
If Corporation, State of Incorporation Date of Incorporation ___
Related Companies Relationship ___
Type of Business Date Established ___
Purchasing Contact Payables Contact ___
Number of Employees Established Annual Sales ___
Required Monthly Credit Line Purchase Ordered Required Yes No
Contractors’ License No./State __________________________ License Certification ___
Owners or Officers
Name S.S.N. Title Home Address
Name S.S.N. Title Home Address
Name S.S.N. Title Home Address
Does the business, or any principal, have any outstanding liens or judgments against them? Yes No If yes, detail:
___________________________________________________________________________________________________________.
Has the business, or any principal, ever declared bankruptcy? Yes No If so, date filed: ____________________________.
Credit References
Name Telephone Number FAX Number
______________________________________________________________________________________________________________
Name Telephone Number FAX Number
Bank References
Name Bank Address / Telephone Number Account Nos.
Name Bank Address / Telephone Number Account Nos.
PLEASE READ AND SIGN AGREEMENTS, TERMS AND CONDITIONS ON REVERSE SIDE.
PLEASE FURNISH FINANCIAL STATEMENT WITH THIS APPLICATION.
Page 1 of 2
Page 2 of 2Page 2 of 2
AGREEMENTS, TERMS AND CONDITIONS
1. CUSTOMER’S ACCEPTANCE OF TERMS: Aluminum and Stainless, Inc. shall hereinafter be referred to as “ASI”, and the applicant shall be referred to as “CUSTOMER.” The CUSTOMER desires to
purchase goods and/or services from ASI, and CUSTOMER agrees in consideration thereof to be bound by the terms and conditions stated in this agreement. ASI hereby objects to any terms orconditions at variance with, different from or additional to those terms and conditions stated herein unless such terms and conditions are hereafter set forth in a writing signed by ASI. Anything hereinto the contrary notwithstanding, no amendment to, or waiver, modification or deletion of, any of the terms and conditions stated herein shall be deemed effective unless any such amendment, waiver,modification or deletion, as the case may be, shall have been approved and accepted in writing by an officer of ASI.2. THE OPEN CREDIT ACCOUNT: ASI reserves the right to approve, approve with conditions or disapprove any request for extension of credit in its sole discretion. The amount of credit extended toCUSTOMER will be determined by ASI and may vary from time to time. CUSTOMER waives notice of any change in CUSTOMER'S credit limit. All amounts charged to the open account are CUSTOMER'S
responsibility. CUSTOMER agrees to pay any and all invoices, charges, fees and costs which CUSTOMER or any authorized person incurs on CUSTOMER’s account. Unless CUSTOMER notifies ASI inwriting within five (5) days of any unauthorized use of CUSTOMER’s credit account, CUSTOMER agrees that any other person who incurs charges on CUSTOMER’s account is authorized to do so.Notwithstanding the foregoing, any and all contracts, certificates, invoices and other writings signed on behalf of CUSTOMER by any employee of CUSTOMER shall be deemed to have been executed onbehalf of CUSTOMER with full authority.3. OPEN ACCOUNT PAYMENT TERMS: All sums owing ASI by CUSTOMER shall be paid in accordance with the terms and conditions expressed on any written quotation signed by ASI andCUSTOMER, or on ASI‘s invoice. In the absence of such express terms and conditions, ASI’s terms for CUSTOMER will be Net 30 days. CUSTOMER agrees to notify ASI in writing, of any error in any
invoice within ten (10) days after the date of that invoice. If not so noticed, the invoice shall be deemed to be correct, and accepted as rendered.4. CUSTOMER’S REPRESENTATIONS: Credit will be extended by ASI to CUSTOMER based on the information provided in this application. CUSTOMER agrees that any financial documents providedASI are true and correct, and will provide ASI such documents, from time to time upon request. CUSTOMER represents to ASI that it is solvent as of the date of this agreement, and that any FinancialStatement attached accurately reflects the present financial condition of CUSTOMER as of the date of this agreement. ASI is authorized to check CUSTOMER’s credit background.5. DEFAULT: Failure to make timely payment as provided in paragraph 3 above shall result in all charges on the account being deemed past due. Whether or not expressed in any quotation or
invoice, all sums past due shall bear an interest charge at the rate of one and one-half percent (1.5%) per month until paid in full. In addition, CUSTOMER agrees to reimburse and pay ASI for allexpenses, costs, and attorney’s fees (including in-house counsel fees) incurred or expended by ASI in enforcing any of its rights hereunder and/or collecting any past due sums, whether or not suit iscommenced.6. PURCHASE ORDERS: Issuance of a purchase order by CUSTOMER shall be deemed an acceptance of ASI'S terms and conditions contained herein, notwithstanding anything to the contrary inCUSTOMER'S purchase order documents. CUSTOMER acknowledges and agrees that issuance of a purchase order creates no burden on the part of ASI to verify its accuracy or validity, and goods orservices that are provided to CUSTOMER pursuant to a purchase order shall be the full responsibility and obligation of the CUSTOMER.
7. SHORTAGES AND/OR DEFECTIVE OR DAMAGED GOODS: Any alleged shortages and/or defective or damaged goods received by CUSTOMER in connection herewith must be reported in writing byCUSTOMER to ASI within 5 days after delivery of said goods. Delivery of goods shall be subject to normal variations in weight, color, size, quantities, etc., as are standard in the trade. After such 5-dayperiod, CUSTOMER shall be deemed to have irrevocably accepted the goods, if not previously accepted. After such acceptance, CUSTOMER shall have no right to reject the goods for any reason or torevoke acceptance. CUSTOMER hereby agrees that such 5-day period is a reasonable amount of time for such inspection and revocation.8. CANCELLATION AND RETURNS: CUSTOMER may not cancel any order of goods without ASI’s express, written consent. Any cancellation so authorized shall be subject to a cancellation charge of15% at ASI’s sole discretion. Unused goods, processed material or specially manufactured materials not normally carried in ASI’s inventory may not, under any circumstances, be returned. The amount
of credit, if any, allowed to CUSTOMER for returned goods shall be at the sole discretion of ASI.9. GOVERNING LAW AND VENUE: Customer agrees that for and in consideration of ASI’s extension of credit, this agreement is to be construed under the laws of the State of Louisiana, and that iflegal action is brought to enforce this agreement, that Lafayette, Louisiana, shall be the exclusive jurisdiction and legal venue for said action, unless ASI initiates said legal action concurrently againstother parties to enforce statutory remedies (such as mechanic’s lien, stop notices, payment bonds, etc.) in connection with a debt incurred by CUSTOMER; in such case, the jurisdiction and legal venuewill be determined by the requirements of the Louisiana law.10. ASSIGNMENT: No right or interest in this agreement shall be assigned by CUSTOMER without the written permission of ASI, and no delegation of any obligation owed or of the performance of
any obligation by CUSTOMER shall be made without written permission of ASI.11. SEVERABILITY: If any term, covenant or condition of this agreement, or the application thereof to any person or circumstance, shall, to any extent, be invalid or unenforceable, the remainder ofthis agreement or the application of such term, covenant or condition to persons or circumstances other than those as to which it is held invalid or unenforceable, shall not be affected thereby, and eachterm, covenant or condition of this agreement shall be valid and shall be enforced to the fullest extent permitted by law.12. NON-WAIVER BY ASI: No waiver of any term, provision or other condition of this agreement by ASI, whether by conduct or otherwise, in any one or more instances, shall be deemed or construed
as a further or continuing waiver of any such term, provision or condition or as a waiver of any other term, provision or condition of this agreement.13. ACCEPTANCE / ENFORCEABILITY OF COPIES: CUSTOMER agrees that ASI may, at ASI’s sole discretion, accept, utilize and rely upon a facsimile copy or photocopy of this agreement and theforegoing Continuing Personal Guaranty or Corporate Guaranty, in lieu of an original document. CUSTOMER acknowledges that, by transmitting a facsimile copy, electronic copy or photocopy of thisdocument to ASI, CUSTOMER, and the Guarantor (if applicable), agree to be bound by the terms and conditions contained in this document to the same extent as if an original were transmitted to ASI.CUSTOMER, and Guarantor (if applicable), consent to ASI’s use of this document and waive any right to object to the use of a copy in place of the original and any right to require Seller to subsequentlyproduce an original document. This Credit Application and Agreement cannot be altered, amended, revised, or otherwise modified unless an officer of ASI provides prior written consent thereto.
THE UNDERSIGNED CERTIFIES THAT THE INFORMATION FURNISHED IN THIS APPLICATION IS TRUE AND CORRECT, AND THAT THE UNDERSIGNED HAS READ AND AGREED TO ALL THE TERMSAND CONDITIONS OF THIS AGREEMENT NOTED ON THE FRONT AND REVERSE PAGES OF THIS APPLICATION. OF FIC ER, AUTHO RIZ ED AGENT OR OWN ER SIG NAT URE IS
REQUI RED .
Signature of Owner/Officer/Authorized Agent Print Name/Title Date
CONTINUING PERSONAL GUARANTY
In consideration of the extension of credit to CUSTOMER by ASI and as an inducement to ASI to continue to extend credit to said CUSTOMER, the undersigned (hereinafter“GUARANTORS”) jointly and severally, unconditionally guaranty the payment of any and all sums of money as are now, or at any time hereafter may be owing to ASI by said CUSTOMER, as a result ofASI’s extension of credit, including attorneys’ fees and costs which may be incurred by ASI to enforce this Guaranty and / or to enforce its claims against CUSTOMER.
GUARANTORS agree to hold ASI harmless from any loss, damage, and expenses caused or arising out of default on the part of CUSTOMER. ASI may proceed against GUARANTORS withoutbeing required to first proceed against the CUSTOMER, and ASI may proceed against any one of the GUARANTORS without waiving its rights to proceed against any of the remaining GUARANTORS.GUARANTORS waive notice of the following: extension of time or modification of terms, settlements or resolutions of disputes, modification of credit line and default of CUSTOMER.
This is intended to be and is a Continuing Guaranty and shall not be revoked except by written notice to ASI not to make any further sales and deliveries on the security of this Guarantyand until the expiration of five (5) days after such notice shall have been received by ASI at the following address: P O Box 3484, Lafayette LA 70502 by certified mail, return receipt requested. Anysuch revocation shall be effective only with respect to merchandise shipped or delivered after the expiration of said five (5) day period, and shall not affect, in any respect, liability incurred byGuarantors prior to that time.
The undersigned, and each of them, agree(s) to be bound by all terms and conditions contained in this Credit Application and Agreement and in the invoices issued hereunder which are
incorporated by this reference as though fully set forth in full.
GUARANTOR # 1:
Guarantor’s Signature Print Name S.S.N. Date
GUARANTOR #2:
Guarantor’s Signature Print Name S.S.N. Date