alternative reader wiring guide -...

7.2

Alternative Reader Wiring Guide

Lenel® OnGuard® 7.2 Alternative Reader Wiring GuideThis guide is item number DOC-601, revision 6.003, October 2015© 2015 United Technologies Corporation. All rights reserved.

Lenel® and OnGuard® (Registered trademarks of UTC Fire & Security Americas Corporation, Inc.) Lenel is a part of UTC Building & Industrial Systems, a unit of United Technologies Corporation.

All trademarks are the property of their respective owners.

Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of UTC Fire & Security Americas Corporation, Inc.

Non-English versions of Lenel documents are offered as a service to our global audiences. We have attempted to provide an accurate translation of the text, but the official text is the English text, and any differences in the translation are not binding and have no legal effect.

The software described in this document is furnished under a license agreement and may only be used in accordance with the terms of that agreement.

Crystal Reports for Windows is a trademark of Crystal Computer Services, Inc.

OnGuard includes ImageStream® Graphic Filters. © 2002 eBT International, Inc. (f/k/a Inso Corporation). All rights reserved. ImageStream Graphic Filters and ImageStream are registered trademarks of eBT International, Inc. (f/k/a Inso Corporation).

Integral and FlashPoint are trademarks of Integral Technologies, Inc.

Portions of this product were created using LEADTOOLS ©1991-2011, LEAD Technologies, Inc. ALL RIGHTS RESERVED. Portions of this product are licensed under US patent 5,327,254 and foreign counterparts.

Active Directory, Microsoft, SQL Server, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Oracle is a registered trademark of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Other product names mentioned may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.

Warranty

UTC Fire & Security Americas Corporation, Inc. ("Lenel") warrants that the product is free from defects in material and workmanship under normal use and service with proper maintenance for one year from the date of factory shipment. Lenel assumes no responsibility for products damaged by improper handling, misuse, neglect, improper installation, over-voltages, repair, alteration, or accident. This warranty is limited to the repair or replacement of the defective unit. In no event shall Lenel be liable for loss of use or consequential damages of any kind, however occasioned. There are no expressed warranties other than those set forth herein. Warranty expressly excludes third party additions, deletions and/or upgrades to this product, including those

contained herein. Lenel does not make, nor intends, nor does it authorize any agent or representative to make any other warranties or implied warranties, and expressly excludes and disclaims all implied warranties of merchantability or fitness for a particular purpose.

Returned units are repaired or replaced from a stock of reconditioned units. All returns must be accompanied by a return authorization number (RMA) obtained from the Lenel customer service department prior to returning or exchanging any product. The RMA number must appear on the outside of the shipping box and on the packing slip. Any items returned without an RMA number will not be accepted and will be returned at the customer's expense. All returns must have transportation, insurance, and custom brokers' fees prepaid.

Liability

It is expressly understood and agreed that the interface should only be used to control exits from areas where an alternative method for exit is available. This product is not intended for, nor is rated for operation in life-critical control applications. Lenel is not liable under any circumstances for loss or damage caused by or partially caused by the misapplication or malfunction of the product. Lenel's liability does not extend beyond the purchase price of the product.


Table of Contents

Access Readers ...................................................................9

1. UL and EN Evaluated Readers ............................................................ 11

2. AIT Readers ......................................................................................... 11

2.1. AIT Reader #L-TR200 ................................................................. 11

3. AWID Readers ..................................................................................... 15

3.1. AWID Sentinel Prox MR-1824 ..................................................... 15

3.2. AWID Sentinel-Prox SP-6820, SR-2400, and MM-6800 ............. 17

3.3. AWID Prox with Keypad (KP-6840) ............................................. 20

3.4. AWID Sentinel-Prox RKP-4600 ................................................... 23

3.5. AWID Sentinel-Prox LR-911 ........................................................ 24

3.6. AWID LR-2200 Reader ............................................................... 26

4. BAI Barcode Readers .......................................................................... 29

4.1. BAI Barcode Reader #BA-200 .................................................... 29

5. Banque-Tec Readers ........................................................................... 31

5.1. Smart Card Reader (Models BT815 and BT900/818) ................. 31

6. Baran Tec Keypad Readers ................................................................ 33

6.1. 39201302 and 39201303 8-bit Output Readers .......................... 33

6.2. Baran Tec Everswitch Proximity Reader Plus Keypad ................ 36

7. Bewator Readers ................................................................................. 39

7.1. Remote Card Reader Model BC18 ............................................. 39

8. Casi-Rusco Prox Readers ................................................................... 41

8.1. Casi-Rusco 94x, 97x Prox Readers ............................................ 41

8.2. Reader (Wiegand) Operation ...................................................... 43

8.3. Casi-Rusco 940-W Prox Lite (F/2F Mode) .................................. 44

8.4. Configuration for Casi-Rusco Readers ........................................ 46

8.5. Reader (F/2F Mode) Operation ................................................... 48

9. CEIA Readers ...................................................................................... 49

9.1. CEIA Freedom Reader with Keypad (Prox) ................................ 49

9.2. CEIA Freedom Reader (Output Protocol Clock/Data) ................. 50

10. Checkpoint Systems Readers ........................................................... 53

revision 6 — 5

Table of Contents

10.1. Mirage II Readers ...................................................................... 53

10.2. Checkpoint Reader Model SN-MSC 16147 ............................... 55

10.3. Mirage Proximity Reader B ....................................................... 57

11. Codeguard Series II/III ....................................................................... 59

11.1. Secure Keypad Reader ............................................................. 59

12. Cross Match Readers ........................................................................ 65

12.1. Cross Match 900xxx TWIC Readers ......................................... 65

13. Deister Electronics ............................................................................. 69

13.1. Smart Card Reader Model PRM 5M, PRX 5 HSF ..................... 69

13.2. Reader Model PRL5/2 KPL5/2 .................................................. 70

14. Dorado Readers ................................................................................ 73

14.1. Dorado Reader Model 644 ........................................................ 73



14.4. Dorado Elevator Reader 570 ..................................................... 77

14.5. Dorado 230/240 Combination Readers ..................................... 79

15. Essex Keypads .................................................................................. 81

15.1. Essex Keypad Reader #KTP-16212SLI .................................... 81

15.2. Essex Keypad Reader #KTP-163SN ........................................ 83

16. HID Readers ...................................................................................... 85

16.1 HID ProxPro ............................................................................... 85

16.2 HID MaxiProx 5370 A-1 .............................................................. 87

16.3 HID MaxiProx 5370/5375AGN00 ............................................... 88

16.4 Hughes MiniProx ........................................................................ 89

16.5 Classic, EPIC Swipe and Pinpad Wiegand Readers .................. 91

16.6 ProxPoint Readers ..................................................................... 92

16.7 ProxPro II ................................................................................... 93

16.8 iCLASS RW300, RW400 Readers/Encoders ............................. 95

16.9 iCLASS and multiCLASS Legacy and SE Readers ................... 97

16.10 multiCLASS RMP40 and RMPK40 Readers .......................... 100

16.11 EntryProx 4045-905 ............................................................... 102

16.12 SensorKey Reader ................................................................. 104

16.13 HID MIFARE 6055 .................................................................. 106

16.14 HID LCD and bioCLASS Readers (RWKL550/RWKLB575) Wired for OSDP Support .......................................................................... 108

16.15 HID MIFARE Format Secure 6075 Reader ............................ 109

16.16 HID OSDP Readers ............................................................... 111

6 — revision 6


16.17 SmartID/SmartTRANS Models S10, SK10, SP10, SPK10 ..... 114

16.18 ThinLine II Proximity Reader .................................................. 117

16.19 ProxPro 5355 Proximity Reader ............................................. 119

17. IDH Max ........................................................................................... 121

17.1. IDH Max Door Readers ........................................................... 121

18. ID Solutions Readers ....................................................................... 125

18.1. ID Solutions Model 8030/8035 Bar Code Reader ................... 125

19. Infographics Readers ....................................................................... 127

19.1. Infographics Reader OTD-60 .................................................. 127

20. Integrated Engineering Readers ...................................................... 129

20.1. Integrated Engineering PX007 Mifare Reader ........................ 129

20.2. Desfire Reader ........................................................................ 131

21. Keri Systems Readers ..................................................................... 133

21.1. Cascade and Sierra Readers (P-300, P-400, P-500, P-600 with Keypad, P-700) .............................................................................. 133

22. Magtek Readers .............................................................................. 135

22.1. Magtek 101-Millimeter Swipe Reader (Model 2105002) ......... 135

23. Mifare Readers ................................................................................ 137

23.1. Mifare Model LA-WIW-PROXKEY-M ...................................... 137

23.2. Iolan Reader Model LA-XXW-PRXKY-MX 1050-4021-092 ..... 139

24. Motorola Indala Readers ................................................................. 141

24.1. Indala Readers ASR-120, ASR-122 ........................................ 141

24.2. Indala Readers ASR-503, ASR-505, ASR-110, ASR-112 ....... 143

24.3. Indala Readers ASR-103, ASR-105, ASR-120, ASR-122, ASR-124, ASR-136 ................................................................................ 145

24.4. Indala Reader ARK-501 .......................................................... 149

24.5. Indala Readers ASR-500, ASR-501, ASR-503, ASR-505, ASR-110 ................................................................................................. 151

24.6. Motorola BiStatix Prox Reader (BXR-610) .............................. 153

24.7. Indala EM4525F Reader ......................................................... 154

24.8. Motorola FlexPass Readers .................................................... 155

25. Nedap Readers ................................................................................ 157

25.1. Nedap Transit Readers ........................................................... 157

26. Northern Readers ............................................................................ 161

26.1. Northern BR-7 Barcode Reader .............................................. 161

27. Schlage Keypads ............................................................................. 163

revision 6 — 7

Table of Contents

27.1. Schlage SERIII-W Scramble Keypad ...................................... 163

28. Secura Key Readers ........................................................................ 169

28.1. e-Tag Prox Reader #ASSY 2014040 ...................................... 169

28.2. Touch Card Reader (TC-100) ................................................. 171

28.3. Touch Card SK-028W Barium Ferrite Reader ......................... 173

29. Suprema Readers ............................................................................ 175

29.1 BioEntry W OSDP Reader ....................................................... 175

30. Synergistics Readers ....................................................................... 177

30.1. SR1054FL Swipe Card Reader ............................................... 177

30.2. SR1058SLE Swipe Card Reader ............................................ 179

31. Texas Instruments Readers ............................................................. 181

31.1. TI S6410 Wall Plate/S6420 Mullion Reader ............................ 181

32. XceedID Readers ............................................................................ 183

32.1. XceedID ISO-X Reader ........................................................... 183

32.2 XceedID aptiQ PR10/SM10/MT11/MT15/MTK15 ..................... 187

32.3 XceedID XF1050-K .................................................................. 190

32.4 XceedID XF1500 ...................................................................... 192

32.5. XceedID Reader Wiring to Support OSDP Protocol ................ 194

Index ........................................................................................................... 195

8 — revision 6

ACCESS READERS


1. UL and EN Evaluated Readers

For more details on which readers are certified for UL Listed or EN Listed installations, refer to the Hardware Installation Guide, DOC-600, or the NGP Hardware Installation Guide, 55-6000E.

2. AIT Readers

2.1. AIT Reader #L-TR200

AIT readers are used for asset tracking. The reader/antenna is connected to a Wiegand data converter and attached directly to a reader interface module. The Wiegand converter changes the data from RS-485 to a standard Wiegand data string. This allows the software to function with these readers and cards. The reader can effectively read the assets up to 45 feet from the reader using asset tags L-TG100 and L-TG200.

revision 6 — 11

AIT Readers

2.1.1 Wiring the LNL-1300

AIT

Aut

omat

ed I

dent

ifica

tion

Tec

hnol

ogie

s

+12v

GND

Rx

+12 vGND

Red LEDGrn LED

Data 00Data 01

Wiegand Data Converter

+12 v

LED (Red LED)BZR (Green LED)

Data 01Data 00

GND

RJ45TerminatingConnector

Wiring to Single Reader Interface Module

TokenIn

Token Return

Tied

Toge

ther

RJ45Connector

Pin 1

Typical Software Settings

Reader Type = Wiegand/ProxKeypad = No KeypadLED Mode = 2-Wire LED Support

Pin Outs for RS-485 Connection

Pin 8 = GroundPin 7 = Data TxPin 6 = Token InPin 5 = +12 v DCPin 4 = Token Return

Pin 2Pin 3Pin 4Pin 5Pin 6

Pin 7Pin 8

AIT Reader# L-TR200

12 — revision 6



AIT

Aut

omat

ed I

dent

ifica

tion

Tec

hnol

ogie

s

+12V

GND

Rx

+12VGND

RedGn

Data 00Data 01

Wiegand Data Converter# L-W1100

+12 vLED (Red LED)BZR (Green LED)Data 01Data 00GND

RJ45TerminatingConnector

Wiring to Dual Reader Interface Module

TokenIn

TokenReturn

Tie

dT

og

eth

er

RJ45Connector

+5V

D0D0-D1

D1-

TxGND

+5V

Yel

C2NO2NC2C1

NO1

NC1

W1W0n/u

AIT Reader# L-TR200

Jumper SettingsJ1 - 4 & 5 offJ2 - 1 & 2 off/3 onJ3 - 1 & 2 OnJ4 - 232 pins 1 & 2


Reader Type = Wiegand/ProxKeypad = No KeypadLED Mode = 2-Wire LED Support

Pin Outs for RS485 Connection

Pin 8 = GroundPin 7 = Data TxPin 6 = Token InPin 5 = +12 VDCPin 4 = Token Return

Pin 1Pin 2Pin 3Pin 4Pin 5Pin 6

Pin 7Pin 8

revision 6 — 13

AIT Readers

14 — revision 6


3. AWID Readers

Use the following diagrams to wire (single wire LED control) Single/Dual Reader Interface Modules and AWID Sentinel readers.

If a Sentinel Prox reader is disconnected from the power supply and then reconnected, the readers will not read the initial card presented. Subsequent cards will be read as usual.

3.1. AWID Sentinel Prox MR-1824

This reader has an input current ranging from 250 to 650 mA. The reader distance also varies according to the current, from 15 to 25 inches. Due to this input current, the reader will need to be run off a dedicated power supply.


AWID

12 V

GND

Power Supply

VO

LED

BZR

CLK/D1

DATA/D0

GND

The negative current from the power supplies must be tied together

Brown

Yellow

White

Green

Red

Black

TYPICAL SOFTWARE SETTINGS

1. Reader Type = WIEGAND/PROX2. Keypad = NO KEYPAD3. LED Mode = 1-WIRE LED CONTROL

Single Reader Interface Module

AWID Sentinel Prox MR-1824

Tie to Earth Ground

revision 6 — 15

AWID Readers


AWID Sentinel Prox MR-1824R

ead

er 1

AWID

12 V

GND

Power Supply

VO

LED

BZR

CLK/D1

DATA/D0

GND

The negative current from the power supplies must be tied together



Brown

Yellow

White

Green

Red

Black

Dual Reader Interface Module

Tie to Earth Ground

16 — revision 6


3.2. AWID Sentinel-Prox SP-6820, SR-2400, and MM-6800

The following readers do not require a dedicated power supply, and can be powered from the reader interface modules. It is important to make sure that the dual reader interface module is set to UNREGULATED POWER MODE (jumper J2). This will allow the maximum amount of current for the readers.

Sentinel-Prox Reader Power Specifications


Note: Connect reader’s cable drain shield to earth ground.

Model Voltage Current

SP-6820 5 to 12 VDC 120 mA

SR-2400 5 to 12 VDC 100 mA

MM-6800 5 to 12 VDC 120 mA

From LNL-1300 To AWID Sentinel-Prox Reader Typical Software Settings

Reader Terminal

Pin Wire Color Description • Reader Type = Wiegand/Prox

• Keypad = No Keypad

• LED Mode = 1-Wire LED Control

TB4

GND Black Ground

BZR Yellow Beeper

LED Brown LED

CLK D1 White Data 1

DAT D0 Green Data 0

V0 Red 5 - 12 VDC

revision 6 — 17

AWID Readers



3.2.3 Wiring the LNL-1300-U


From LNL-1320 To AWID Sentinel-Prox Reader Typical Software Settings

Reader 1 or Reader 2 Pin Wire Color Description • Reader Type = Wiegand/Prox



GND Black Ground

DAT D0 Green Data 0

CLK D1 White Data 1

BZR Yellow Beeper

LED Brown LED

V0 Red 5-12 VDC

From LNL-1300-U To AWID Sentinel-Prox Reader Typical Software Settings

Reader Terminals




J10

GND Black Ground

DAT D0 Green Data 0

CLK D1 White Data 1

J13

LED1 Brown Green LED

LED2 Not connected Not connected

BZR Yellow Buzzer

V0 Red 5-12 VDC

18 — revision 6



Notes: Do not connect the AWID Sentinel-Prox Reader reader to the J15 and J18 terminals on the LNL-1320-U.

Connect reader’s cable drain shield to earth ground.

From LNL-1320-U To AWID Sentinel-Prox Reader Typical Software Settings

Reader Terminals




J10

GND Black Ground

DAT D0 Green Data 0

CLK D1 White Data 1

J13



BZR Yellow Buzzer

V0 Red 5-12 VDC

revision 6 — 19

AWID Readers

3.3. AWID Prox with Keypad (KP-6840)

Note: The reader firmware must be KP-6840 REV C-8 for proper functionality.

The reader can be powered directly from the Dual Reader Interface.

Prox with Keypad Reader Power Specifications




KP-6840 5 to 12 VDC 50 to 120 mA

From LNL-1300 To AWID Prox with Keypad Reader Typical Software Settings

Reader Terminal


• Keypad = 8-Bit Output


TB4

GND Black Ground

BZR Yellow Beeper

LED Brown LED

CLK D1 White Data 1

DAT D0 Green Data 0

V0 Red 5 - 12 VDC

20 — revision 6






From LNL-1320 To AWID Prox with Keypad Reader Typical Software Settings




GND Black Ground

DAT D0 Green Data 0

CLK D1 White Data 1

BZR Yellow Beeper

LED Brown LED

V0 Red 5-12 VDC

From LNL-1300-U To AWID Prox with Keypad Reader Typical Software Settings

Reader Terminals




J10

GND Black Ground

DAT D0 Green Data 0

CLK D1 White Data 1

J13



BZR Yellow Buzzer

V0 Red 5-12 VDC

revision 6 — 21

AWID Readers


Notes: Do not connect the AWID Prox with Keypad Reader to the J15 and J18 terminals on the LNL-1320-U.


From LNL-1320-U To AWID Prox with Keypad Reader Typical Software Settings

Reader Terminals




J10

GND Black Ground

DAT D0 Green Data 0

CLK D1 White Data 1

J13



BZR Yellow Buzzer

V0 Red 5-12 VDC

22 — revision 6


3.4. AWID Sentinel-Prox RKP-4600

This reader is a radio-frequency proximity reader with a virtually indestructible integrated keypad for access control systems. The reader consists of a 12-key piezoelectric keypad, transmit/receive antenna, and reader electronics, in a slim plastic housing. The reader electronics are potted with epoxy resin to protect against the environment. The reader may be mounted on a single-gang electrical utility box, or on any surface (wall, cabinet, etc.).

3.4.1 Wiring the RKP-4600 Reader

revision 6 — 23

AWID Readers

3.5. AWID Sentinel-Prox LR-911

The LR-911 requires an alternate power source of 5-15 VDC and has a current requirement of 1.5A. There are no LED's on the reader (optional). The reader has a read range of up to 11 feet. See diagram below for proper wiring and setup.


* The LR-911 feature a cone shaped read zone. Theoptimal read zone is a circular cone that is at a 45 degreeangle from the edges of the reader and extends out to 11feet away from the center of the reader. Cards can beread accurately if presented to the reader within this range.

Up to 11' fromreader

12v

GND

Power Supply

Red

Black

VO

LED

BZR

CLK/D1

DATA/D0

GND

Yellow

*Allows LR-911 Read Cylcling

Green

White

Blue


AWID


1. Reader Type = WIEGAND/PROX2. Keypad = NO KEYPAD3. LED Mode = No-LED Control

24 — revision 6




AWID

Rea

der 1

12v

GND

Power Supply

VO

LED

BZR

CLK/D1

DATA/D0

GND

Red

Black

Yellow

*Allows LR-911 Read Cylcling

Green

White

Blue


1. Reader Type = WIEGAND/PROX2. Keypad = NO KEYPAD3. LED Mode = No-LED Control

revision 6 — 25

AWID Readers

3.6. AWID LR-2200 Reader

The LR-2200 requires an alternate power source of 12-24 VDC and has a current requirement of 1.5 A. The reader has a read range of 15 to 20 feet (4.6 to 6.1 meters).

LR-2200 Reader Power Specifications


Note: Connect the LR-2200 red wire to the power output terminal of the alternate power source. Connect the LR-2200 black and yellow wires to the ground terminal of the alternate power source.


LR-2200 12 to 24 VDC Up to 1.5 A

From LNL-1300 To AWID LR-2200 Reader Typical Software Settings

Reader Terminal


TB4

GND Blue Ground

BZR Not connected Not connected

LED Not connected Not connected

CLK D1 White Data 1

DAT D0 Green Data 0

V0 Not connected Not connected

26 — revision 6






From LNL-1320 To AWID LR-2200 Reader Typical Software Settings


GND Blue Ground

DAT D0 Green Data 0

CLK D1 White Data 1


LED Not connected Not connected


From LNL-1300-U To AWID LR-2200 Reader Typical Software Settings

Reader Terminals


J10

GND Blue Ground

DAT D0 Green Data 0

CLK D1 White Data 1

J13





revision 6 — 27

AWID Readers



From LNL-1300-U To AWID LR-2200 Reader Typical Software Settings

Reader Terminals


J10

GND Blue Ground

DAT D0 Green Data 0

CLK D1 White Data 1

J13





28 — revision 6


4. BAI Barcode Readers

The BAI (BA-200) Barcode reader supports an Wiegand output format of 26, 30, and 31 bits. The reader will support the following barcode formats: 10 digit interleave 2 of 5 barcode, 8 digit interleave 2 of 5 barcode, proprietary format called AFC, and 5 character code 39 barcode. For test purposes, there were no setup modifications made. We used all pre-set factory default settings. There are two LED's on the outside of the reader. The amber light shows that there is power connected to the reader, and the green light will come on when there is a valid card read. The current firmware revision is 1006.

4.1. BAI Barcode Reader #BA-200


B A IBarcode Automation Inc.

Wiegand 0Wiegand 1

Ground

Ground

Data

Clock


24 VDCPower Supply

Ground+24 VDC



revision 6 — 29

BAI Barcode Readers


B A IBarcode Automation Inc.

Wiegand 0Wiegand 1

Ground

Gro

und

Dat

a

Clo

ckDual Reader Interface Module

24 VDCPower Supply

Ground+24 VDC



30 — revision 6


5. Banque-Tec Readers

5.1. Smart Card Reader (Models BT815 and BT900/818)

The smart card reader operates at 12 VDC and communicates with a standard Wiegand output. It uses a single wire LED control. Follow the drawing below to connect the reader to the reader interface module.




Blue

White

Green

Yellow

Red

Black

VO

LED

BZR

CLK/D1

DATA/D0

GND

BANQUE-TECSingle Reader Interface Module

revision 6 — 31

Banque-Tec Readers




BANQUE-TEC

Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Blue

White

Green

Red

Black


Yellow

32 — revision 6


6. Baran Tec Keypad Readers

These readers are available in two styles: 3 x 4 keypads (part number 39201303) and 2 x 6 keypads (part number 39201302).

Baran Tec 39201302 and 39201303 Reader Power Specifications

6.1. 39201302 and 39201303 8-bit Output Readers

The reader requires a 12/24 V, AC or DC power source, and has a current draw of 10 mA. Therefore, the reader can be powered directly from either of the reader interface modules.

The reader features a 2-Wire LED configuration. If the LED support for this keypad is not being used, omit the connections for those two wires. The reader is using a standard 8-bit output format.


39201302 12/ 24 V, AC/DC 10 mA

39201303 12/ 24 V, AC/DC 10 mA

revision 6 — 33

Baran Tec Keypad Readers

Important: If connecting two readers to one interface module, make sure that the LED control is connected for only one reader. Both reader LEDs can not be connected at the same time.



From LNL-1300 To Baran Tec Reader Typical Software Settings

Reader Terminal

Pin Wire Description • Keypad = 8-bit Output

• Reader Type = Wiegand/Prox


TB4

GND Black Ground

BZR Yellow Red LED

LED Brown Green LED

CLK D1 White Clock/D1

DAT D0 Green Data/D0

V0 Red Power (5-12 VDC)

From LNL-1320 To Baran Tec Reader Typical Software Settings

Reader 1 or Reader 2 Pin Wire Description • Keypad = 8-bit Output



GND Black Ground

DAT D0 Green Clock/D0

CLK D1 White Data/D1

BZR Yellow Red LED

LED Brown Green LED


34 — revision 6




From LNL-1300-U To Baran Tec Reader Typical Software Settings

Reader Terminals




J10

GND Black Ground



J13

LED1 Yellow Green LED

LED2 Brown Red LED

BZR Not connected Buzzer Input


From LNL-1320-U To Baran Tec Reader Typical Software Settings

Reader Terminals




J10

GND Black Ground



J13

LED1 Yellow Green LED

LED2 Brown Red LED

BZR Not connected Buzzer Input


revision 6 — 35


6.2. Baran Tec Everswitch Proximity Reader Plus Keypad

The BaranTec Everswitch reader operates at 5-12 VDC. The maximum current draw is 150 mA.



1. Reader Type = WIEGAND/PROX2. Keypad = 8-bit Output Keypad3. LED Mode = 1-WIRE LED CONTROL

Brown

White

Green

Red

Black

Single ReaderInterface Module

DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to EarthGround

*

4

# 9 0

7 8

5 6

3

1 2

1k,1%

Supervision: Not Supervised, Normally Open

Gray

Tamper Input

36 — revision 6




1. Reader Type = WIEGAND/PROX2. Keypad = 8-bit Output Keypad3. LED Mode = 1-WIRE LED CONTROL

Dual Reader InterfaceModule

Re

ad

er 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

White

Green

Red

Black

Tie to EarthGround

*

4

# 9 0

7 8

5 6

3

1 2

1k,1%

Supervision: Not Supervised, Normally Open

Tamper Input

Gray

revision 6 — 37


38 — revision 6


7. Bewator Readers

7.1. Remote Card Reader Model BC18

The reader does not require a separate power supply when being connected to the Dual Reader Interface Module. However, the reader will need an alternate 5 VDC power connection if it is connected to a Single Reader Interface Module. The recommended draw is 40 mA and the reader needs to be connected to 5 VDC. Also, be sure to set up Jumper J2 for REGULATED power mode. J4 should be configured for 5 VDC. Recommended operating temperature: -10° to 55° C.


Green

Yellow

Grey

White

Blue

VO

LED

BZR

CLK/D1

DATA/D0

GND


5 VDCPowersupply +

-

BC18

BE

WA

TO

R


1. Reader Type = ALL OTHER READERS2. Keypad = NO KEYPAD3. LED Mode = 1-WIRE LED CONTROL

revision 6 — 39

Bewator Readers


Reader 1

Reader 2

VO

LED

BZR

CLK/D1

DATA/D0

GND

Green

Yellow

Grey

White

Blue


BC18

BE

WA

TO

R


1. Reader Type = ALL OTHER READERS2. Keypad = NO KEYPAD3. LED Mode = 1-WIRE LED CONTROL

40 — revision 6


8. Casi-Rusco Prox Readers

8.1. Casi-Rusco 94x, 97x Prox Readers

This reader operates at 12 VDC. The average current draw with Power Level set to Low (SW-2) is 75 mA. See manual for volt and current recommendations.


Brown (Green LED )

Blue (Red LED)

White (D1)

Green (D0)

Red (+12VDC)

Black (Ground )


DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to Earth Ground

CASI -RUSCO

R Y G


1. Reader Type = WIEGAND/PROX2. Keypad = 8 bit (if used)3. LED Mode = 2-WIRE LED CONTROL

revision 6 — 41

Casi-Rusco Prox Readers


VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND

RE

AD

ER

1R

EA

DE

R 2


CASI-RUSCO

R Y G

Black (Ground )

Blue (Red LED)

Brown (Green LED )

Red (+12VDC)

Green (D0)

White (D1)


1. Reader Type = WIEGAND/PROX2. Keypad = 8 bit (if used)3. LED Mode = 2-WIRE LED CONTROL

42 — revision 6


8.1.3 Set the 94x/97x DIP Switches

Casi-Rusco 94x, 97x DIP switch settings

8.2. Reader (Wiegand) Operation

Three LED lights across the top of the Casi-Rusco prox readers signify the mode of operation.

Status Indicators

AUDIO RED LED YELLOW LED

GREEN LED

LED Operation:

Locked --- Solid light Dim light Dim light

Card Only --- Slow-blinking light Dim light Dim light

Card or PIN --- Slow-blinking light Dim light Slow-blinking light

Card and PIN --- Slow-blinking light Dim light Dim light

Unlocked --- Slow-blinking light Dim light No light

Facility Code Only --- Slow-blinking light Dim light Dim light

Beeper Operation:

1

2

34

ON OFF

Gray Area represents switch position

5

6

7

8

ON OFF

DIP Switch setup for reader

Wire connector on

back of reader

SW-2

SW-3

Switch 5, 6 = Off – WiegandSwitch 7 = On, Switch 8 = Off – Beeper Sound Low

Reader (Backplate Removed)

Switches 1,4 = Off, Switches 2,3 = On -Power Level = Low

revision 6 — 43


8.3. Casi-Rusco 940-W Prox Lite (F/2F Mode)

The Dual Reader Interface Module can support Casi-Rusco readers in the F/2F mode of operation. This is only supported on Dual Reader Interface Modules with firmware 1.13 or higher. The 940-W Prox Lite is the 94x or 97x proximity reader in OnGuard, used in F/2F mode.

This reader operates at 12 VDC. The average current draw with Power Level set to Low (SW-2) is 75 mA. See manual for volt and current recommendations.

Access Granted Two beeps No light for 5 seconds

Blinks once Blinks 5 times

Access Denied Three beeps Stops blinking for 5 seconds

Blinks once Dim light

Invalid Badge Single beep Blinks 6 times --- ---

In a Card and PIN Configuration:

Access Granted (once a valid PIN is entered, the door opens)

Single beep --- Dim light Dim light

Access Denied Single beep If no PIN is entered, the red LED blinks 6 times.

Dim light Dim light

Status Indicators


GREEN LED

44 — revision 6



VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND

RE

AD

ER

1R

EA

DE

R 2


CASI-RUSCO

R Y G

Black (Ground )

Blue (Red LED)

Brown (Green LED )

Red (+12VDC)

White (D1)


1. Reader Type = F/2F format2. Keypad = NO KEYPAD3. LED Mode = 2-WIRE LED CONTROL

revision 6 — 45


8.3.2 Set the 940w DIP Switches

Casi-Rusco 940w DIP switch settings

8.4. Configuration for Casi-Rusco Readers

The Casi-Rusco readers can be configured for Wiegand/Prox or F/2F format.

1

2

34

ON OFF

Gray Area represents switch position

5

6

7

8

ON OFF

DIP Switch setup for reader

Wire connector on

back of reader

SW-2

SW-3

Switch 5 = On, 6 = Off – F/2FSwitch 7 = On, Switch 8 = Off – Beeper Sound Low

Reader (Backplate Removed)

Switches 1,4 = Off, Switches 2,3 = On -Power Level = Low

46 — revision 6


8.4.1 Casi-Rusco Readers as a Wiegand/Prox Type

In order to configure the software correctly, refer to the following screenshot. This screen can be launched by selecting Card Formats from the Administration menu in either ID CredentialCenter or System Administration.

The configuration for the Casi-Rusco within the access control system is as follows:

• Reader Output – Wiegand/Prox format

• Keypad Type – 8 bit (if keypad is used)

• Reader Settings – 2-wire LED control

8.4.2 Casi-Rusco Readers as a Dual Reader Interface in F/2F Format

The configuration for this reader in F/2F mode is different. Refer to the following screenshot.

revision 6 — 47


The default configuration for the Casi-Rusco within the access control system is as follows:

• Reader Type – Select LNL-1320 (Dual Interface)

• Reader Output – Select F/2F Format

• Reader Number – 1 or 2

• Keypad Type – The keypad type does not apply when using F/2F format

• Reader Settings – 2-wire LED control

8.5. Reader (F/2F Mode) Operation

Three LED lights across the top of the Casi-Rusco prox readers signify the mode of operation.

Status Indicators


GREEN LED

LED Operation:

Locked --- Solid light Dim light Dim light

Card Only --- Slow-blinking light Dim light Dim light

Card or PIN --- --- Dim light Slow-blinking light

Card and PIN --- Slow-blinking light Dim light Dim light

Unlocked --- --- Dim light Slow-blinking light

Facility Code Only --- Slow-blinking light Dim light Dim light

Beeper Operation:

Access Granted Single beep --- --- ---

Access Denied Single beep Blinks 6 times --- ---

Invalid Badge Single beep Blinks 6 times --- ---

In a Card and PIN Configuration:

Access Granted (once a valid PIN is entered, the door opens)

Single beep --- Dim light Dim light

Access Denied Single beep If no PIN is entered, the red LED blinks 6 times.

Dim light Dim light

48 — revision 6


9. CEIA Readers

9.1. CEIA Freedom Reader with Keypad (Prox)

The maximum power rating on the Freedom Reader is between 5-30 VDC. The normal current draw for the reader is 40 mA. The keypad on the reader operates using a 4-bit output. This is not the standard format. This is the only format that is tested and supported by Lenel. The LED functions using single wire LED control. Both the keypad and the LED meet all the requirements for functionality that Lenel requires. Follow the diagrams below to wire the reader properly.


VO

LED

BZR

CLK/D1

DATA/D0

GND

1 32

4 65

7 98

#0*



1. Reader Type = WIEGAND/PROX2. Keypad = 4-Bit Output3. LED Mode = SINGLE WIRE LED CONTROL

revision 6 — 49

CEIA Readers


9.2. CEIA Freedom Reader (Output Protocol Clock/Data)

This reader operates typically on 25 mA, peak 50 mA at 5-30 VDC.

Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

1 32

4 65

7 98

#0*

Connections made to terminal strip on back of reader



1. Reader Type = WIEGAND/PROX2. Keypad = 4-Bit Output3. LED Mode = SINGLE WIRE LED CONTROL

50 — revision 6




Tie to Earth Ground


1. Reader Type = All other readers2. Keypad = No Keypad 3. LED Mode = 1 WIRE LED CONTROL DATA/D0

VO

LED

BZR

CLK/D1

GND

Red

Green

White

Brown

Black

revision 6 — 51

CEIA Readers


Dual Reader Interface Module Tie to

Earth Ground


1. Reader Type = All other readers2. Keypad = No Keypad 3. LED Mode = 1 WIRE LED CONTROL

DATA/D0

VO

LED

BZR

CLK/D1

GND

Red

Brown

White

Green

Black

52 — revision 6


10. Checkpoint Systems Readers

Use the following diagrams to wire (single wire LED control) Single/Dual Reader Interface Modules and Checkpoint Systems readers.

10.1. Mirage II Readers


TYPICAL SOFTWARE SETTINGS1. 2-Wire LED Support2. No keypad3. Wiegand/Prox data type

Checkpoint SystemsMirage II Reader


GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

Black - Ground

Brown - LED

White - Data 1

Red - 12 VDC

Green - Data 0

revision 6 — 53

Checkpoint Systems Readers


RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND


TYPICAL SOFTWARE SETTINGS1. 2-Wire LED Support2. No keypad3. Wiegand/Prox data type4. Use Unregulated Mode for jumper J2

Red - 12 VDC

Brown - LED

White - Data 1

Green - Data 0

Black - Ground

Checkpoint SystemsMirage II Reader

54 — revision 6


10.2. Checkpoint Reader Model SN-MSC 16147

This Checkpoint reader is operated at 12 VDC and has a current draw of 75 mA.



Checkpoint Reader Model SN-MSC 16147


1. Reader Type = Single Interface (Weigand/Prox)2. LED Mode = 2 Wire LED Control

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

Checkpoint

Black

White

Green

Red

Brown

revision 6 — 55



RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND

TYPICAL SOFTWARE SETTINGS1. Reader Type = Single Interface (Weigand/Prox)2. LED Mode = 2 Wire LED Control

Dual ReaderInterface Module

Checkpoint

Red

White

Black

Green

Brown

Checkpoint Reader Model SN-MSC 16147

56 — revision 6


10.3. Mirage Proximity Reader B

The Mirage Proximity Reader B is a 33-bit prox reader. It operates at 12 VDC ± 10%. The average current draw is 50 mA.


White

Green

Red

Black

DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie toEarth

Ground


1. Reader Type = WIEGAND/PROX2. Keypad = NO KEYPAD3. LED Mode = 1 or 2-WIRE LED CONTROL

revision 6 — 57




Re

ad

er 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

White

Green

Red

Black

Tie toEarth

Ground



58 — revision 6


11. Codeguard Series II/III

11.1. Secure Keypad Reader

The reader operates at +8 to +12 VDC unregulated. The average current draw is 100 mA (TYP) 180 mA (MAX) with display OFF and 280 mA (TYP) 350 mA (MAX) with display ON.

11.1.1 Set the Mode Dials

`

12

543

0E F

8

D

B69

C

A7

`

12

543

0E F

8

D

B69

C

A7

`

12

543

0E F

8

D

B69

C

A7

Mode Dials in Rear Panel

(Located Behind Rubber Blanking Plug)

Facility Code (Modes 1-6 only, set to 0,0 for modes 7-A)

Operating Mode(See Card Formats)

IMPORTANT: The Facility Code and Operating Mode must be set PRIOR to the installation of the reader.

To Set Facility CodeEach switch is numbered 0 to F, allowing 256 different facility codes to be selected (00 to FF). The switch on the left sets the most-significant digit of the Facility Code, the switch on the right sets the least-significant digit of the code. Disconnect power from the unit when altering the setting of these switches.

revision 6 — 59

Codeguard Series II/III

11.1.2 Card Formats

Code Lengths

• Mode 0 Supports 1 to 9 digits with a transmitted block length of 40 bits with even/odd parity.

• Mode 1 Supports 1 to 4 digits with a transmitted block length of 34 bits.



• Mode 4 Supports 5 digits with a transmitted block length of 34 bits.


• Mode 6 Supports 5 digits with a transmitted block length of 26 bits with even/odd parity.

Model series

Mode Total number of bits on card

Facility codeStarting bit/Number of bits

Card numberStarting bit/Number of bits

Issue codeStarting bit/Number of bits

Number of even parity bits

Number of odd parity bits

Special

II or III 0 40 1 / 8 9 / 30 0 / 0 20 20 None

II or III 1 34 1 / 8 17 / 16 0 / 0 0 0 None

II or III 2 26 1 / 8 9 / 16 0 / 0 0 0 None

II or III 3 26 1 / 8 9 / 16 0 / 0 13 13 None

II or III 4 34 1 / 8 17 / 16 0 / 0 0 0 None

II or III 5 26 1 / 8 9 / 16 0 / 0 0 0 None

II or III 6 26 1 / 8 9 / 16 0 / 0 13 13 None

III only 7 4-bit keypad emulation, 0-9 codes only


III only 9 4-bit keypad emulation, 0-9 plus # and * codes transmitted

III only A 8-bit keypad emulation, 0-9 plus # and * codes transmitted

60 — revision 6




1. Reader Type = Wiegand / Prox2. Keypad = 4 or 8 Bit Output (see mode)3. LED Mode = 2-WIRE LED CONTROL

DATA/D0

VO (No Connection)

LED

BZR

CLK/D1

GND


12

34

56

78

Connector Pin Block

Pin 2

Pin 8

Pin 4

Pin 5

Pin 7

Pin 38-12VDC Power

Supply-+

revision 6 — 61



DATA/D0

LED

BZR

CLK/D1

GND


12

34

56

78

Connector Pin Block

Pin 7

Pin 5

Pin 8

Pin 4

IMPORTANT! This reader cannot be powered from the Dual Reader Interface Module. There must be a common ground between the Power Supply and the Dual Reader Interface Module.

Pin 2 8-12VDC Power Supply

-+Pin 3

VO (No Connection)



62 — revision 6


11.1.5 LED Operation

Mode Series II Secure Keypad Series III Secure Keypad

Card and PIN N/A Blinking red at bottom of keypad

Card only N/A Blinking red at bottom of keypad

Card or PIN Blinking red and [*] key on keypad solid

Blinking red at bottom of keypad

Cipher lock emulation Blinking red and [*] key on keypad solid


Facility code mode N/A

* This mode is unsupported. Any entry within the Code Length will let someone gain access because the facility code is set in the reader.


Locked Solid red at bottom of keypad Solid red at bottom of keypad

Unlocked Solid yellow at bottom of keypad Solid yellow at bottom of keypad

Power up condition Blinking red at bottom of keypad. Keypad will display firmware version and operating mode.

Keypad will display firmware version and operating mode

Access granted Blinking yellow at bottom of keypad Blinking yellow at bottom of keypad

Access denied Solid red at bottom of keypad Solid red

Waiting for PIN Blinking red and [*] key on keypad solid

Blinking red and yellow, * key on keypad solid

Waiting for second card Blinking yellow at bottom of keypad

* This mode is unsupported because there are times when a second entry creates an invalid card format.

Alternating red and yellow at bottom of keypad

Reader LED software setup

2-wire LED control 2-wire LED control

Reader type Wiegand/Prox Wiegand/Prox

Keypad 4-bit output keypad 8-bit output keypad

+ 12 V Pin 3 Pin 3

DAT 0 Pin 7 Pin 7

DAT 1 Pin 5 pin 5

LED Pin 4 Pin 4

BZR Pin 8 Pin 8

GND Pin 2 Pin 2

revision 6 — 63


• The star [*] key must be pressed prior to PIN entry.

• The star [*] key always illuminated red.

• Upper left LED blinks with each key press.

• Pressing the [*] key will activate keypad, rescramble keys, and transmit the * key code to the OnGuard system.

• Keypad commands sometimes are not accepted, likely because of the multiple functions of the star [*] key. Pressing the star [*] key twice before commands may help.

Earth ground Case ground Not connected, or connect to Pin 2 (avoid ground loops)


64 — revision 6


12. Cross Match Readers

12.1. Cross Match 900xxx TWIC Readers

Cross Match TWIC readers (models 90223, 900236, 900260) are supported. The average reader draw is 325mA @ 12 VDC. General power requirements: +9 to +18 VDC, 6W total.



Tie to Earth Ground

DATA/D0

VO

LED

BZR

CLK/D1

GND

DRAIN

Brown

White

Green

Reader LED

Black


1. Reader Type = Mag w/Wiegand Output2. Keypad = Eight Bit Output Keypads 3. LED Mode = 1-WIRE LED CONTROL

revision 6 — 65

Cross Match Readers


12.1.3 Custom LED Configuration

There are two options for LED functionality. These are configured by a toggle in the device’s configuration web interface menu.

• Local LED Control – This option allows the reader’s internal logic to control all LED behavior.

• Let Wiegand Panel Drive Grant LEDs – This option lets the Lenel Hardware manage some LED behavior, such as indicating door unlocked.


Tie to Earth

Ground

DATA/D0

VO

LED

BZR

CLK/D1

GND

DRAIN

Brown

White

Green

Black

Reader LED


1. Reader Type = Mag w/Wiegand Output2. Keypad = Eight Bit Output Keypads 3. LED Mode = 1-WIRE LED CONTROL

66 — revision 6


revision 6 — 67

Cross Match Readers

68 — revision 6


13. Deister Electronics

13.1. Smart Card Reader Model PRM 5M, PRX 5 HSF

The smart card reader can operate between 8 and 30 VDC. In order for the reader LEDs to function properly, the reader will need to be set up for 2-wire control.


deis ere ectronics

+ S

up

ply

D1

(Clo

ck

)

D0

(Da

ta)

GN

D

Gre

en

LE

D

Re

d L

ED

1 2 3 4 5 6 7 8 9 10 11 12TERMINAL STRIP ON BACK OF READER

VO

LED

BZR

CLK/D1

DATA/D0

GND




revision 6 — 69

Deister Electronics


13.2. Reader Model PRL5/2 KPL5/2

This reader can operate between 8 and 30 VDC.

deis ere ectronics

+ S

up

ply

D1

(Clo

ck

)

D0

(Da

ta)

GN

D

Gre

en

LE

D

Re

d L

ED

1 2 3 4 5 6 7 8 9 10 11 12

TERMINAL STRIP ON BACK OF READER

Re

ad

er 1

VO

LED

BZR

CLK/D1

DATA/D0

GND




70 — revision 6



+ S

up

ply

D1 (C

lock)

D0 (D

ata)

GN

D

Green LE

D

Red L

ED

1 2 3 4 5 6 7 8 9 10 11 12

TERMINAL BLOCK ON BACK OF READER

VO

LED

BZR

CLK/D1

DATA/D0

GND




revision 6 — 71

Deister Electronics


+ S

upply

D1 (C

lock)

D0 (D

ata)

GN

D

Green LE

D

Red L

ED

1 2 3 4 5 6 7 8 9 10 11 12

TERMINAL BLOCK ON BACK OF READER

Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND




72 — revision 6


14. Dorado Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Dorado readers.

14.1. Dorado Reader Model 644

For the Dorado Reader 644, a 16-position rotary switch (Trim POT) is now used for reader configuration. It is located inside the housing on the circuit board. The LED control is standard single wire. The reader should be configured to setting 8 (EMPI cards, 26-bit Wiegand).


Brown

White

Yellow

Red

Black

Dorado Reader Model 644

Green

GND

VDC 5 VDC Power Supply

TYPICAL SOFTWARE SETTINGSReader Type = Mag w/Wiegand Output

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


revision 6 — 73

Dorado Readers


Brown wire

Green wire

Yellow wire

Red wire

Black wire

Dorado Reader Model 644

White wire

RE

AD

ER

1VO

LED

BZR

D1/CLK

D0/DATA

GND


DUAL READER INTERFACE MODULE CONFIGURATION1. The 1320 must be set to 5 VDC output (jumper J4)2. Use Regulated Mode for the 1320 (jumper J2)

5 VDC

TYPICAL SOFTWARE SETTINGSReader Type = Mag w/Wiegand Output

74 — revision 6




Switch Set for Mode 5ABA Card Clock &

Data Black wire

Brown wire

Green wire

White wire

Red wire

Dorado ReaderModel 780

Yellow wire

Single Reader Interface Module with aDorado 780 Card and Pin Reader

A

B

C

D

SW

1O

N

OFF

Software Settings: Reader interface All other readers Dorado LED control 8 Bit Pin numbers Requires Firmware Revision for the Dual Reader Interface

10278 0 MR-52R1.04aMSC-C97-8 STO

or for Single Reader Interface10241 2 MR-50R1.06MSC (c) 95-8

GND

12 VDCPower Supply

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

80 mA maximum

revision 6 — 75

Dorado Readers


Switch Set for Mode 5ABA Card Clock & DataYellow wire

White wire

Brown wire

Red wire

Black wire

Dorado Reader Model780

Green wire

RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

Dual Reader Interface Module with aDorado 780 Card and Pin Reader

VO

LED

BZR

D1/CLK

D0/DATA

GND

See manual for 12 VDC1320 Jumper settingsJ4 - OFF, J2 - UNREG

A

B

C

D

SW

1O

N

OFF

Software Settings: Reader interface All other readers Dorado LED control 8 Bit Pin numbers Requires Firmware Revision for the Dual Reader Interface

10278 0 MR-52R1.04aMSC-C97-8 STO

or for Single Reader Interface10241 2 MR-50R1.06MSC (c) 95-8

76 — revision 6



14.4. Dorado Elevator Reader 570

This reader operates at 35 mA at +5.5 volts (regulated 4.75 to 5.75).

If you are going to power the reader from the LNL-1320, set jumper 4 to the ON position for 5 volts and jumper 2 for regulated mode.

A four-position DIP switch is located on the reader circuit board to control the reader options. The reader should be set to Mode 6. Note that the fourth switch is not used and should be set to the OFF position.

Mode A B C D Function

6 ON off ON off ABA card, all bits Wiegand

Brown wire

Green wire

Yellow wire

Red wire

Black wire

A

B

C

D

ON

DoradoReader

Model 611

White wire

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

GND

VDC 5 VDCPower Supply (35 mA)

Software Settings: Reader interface All other

readers One Wire LED Control

The Dual Reader Interface must have Jumper J4 ON for 5 VDC Operation orExternal Power supply must be used as shown below

RE

AD

ER

1R

EA

DE

R 2

See manual for voltage andcurrent recommendations.

OFF

revision 6 — 77

Dorado Readers


The wires are connected as follows:

Reader wire color Association on LNL-1300

Yellow BZR

Brown LED

White CLK/D1

Green DATA/D0


Tie to EarthGround

DATA/D0

VO

LED

BZR

CLK/D1

GND

Yellow

BrownWhiteGreen

Red to +5VDC

Black to Common

TYPICAL SOFTWARE SETTINGS1. Reader Type = MAG w/Wiegand Output2. Keypad = No Keypad3. LED Mode = 2-WIRE LED CONTROL

78 — revision 6



14.5. Dorado 230/240 Combination Readers

There are two types of these combination readers. Model 230 is a combination magnetic stripe and proximity reader. Model 240 is a combination magnetic strip and proximity reader with a keypad. These readers operate at 5-24 VDC. The typical current draw is 75 mA.

The 16 position rotary switch will control the formats of the reader and should be set to 0. Position 0 is ABA HID – all bits ABA, no leading or trailing zeros, Wiegand output. For HID prox, the number of output bits on the card are not defined by selector switch.


Re

ad

er 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

White

Green

Tie to EarthGround

Yellow

Red

Black

TYPICAL SOFTWARE SETTINGS1. Reader Type = MAG w/Wiegand Output2. Keypad = No Keypad3. LED Mode = 2-WIRE LED CONTROL

revision 6 — 79

Dorado Readers



Brown

White

Green

Red

Black


DATA/D0

VO

LED

BZR

CLK/D1

GND

TYPICAL SOFTWARE SETTINGS1. Reader Type = MAG W/WIEGAND OUTPUT2. Keypad = EIGHT BIT OUTPUT KEYPADS3. LED Mode = 1-WIRE LED CONTROL


Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

White

Green

Red

Black


1. Reader Type = MAG W/ WIEGAND OUTPUT2. Keypad = EIGHT BIT OUTPUT KEYPADS3. LED Mode = 1-WIRE LED CONTROL

80 — revision 6


15. Essex Keypads

Use the following diagrams to wire Single/Dual Reader Interface Modules and Essex keypad readers.

15.1. Essex Keypad Reader #KTP-16212SLI

15.1.1 Wiring the LNL-1300 (Single Wire LED Control)

GND

12 VDCPower Supply

1 2

3 4

5 6

7 8

9 0

∗ #

Brown - LED wire

Black - Ground

Orange

Red - Vcc

Green - Data 0

White - Data 1

Yellow - LED wire

Tan - Case

Blue

Essex KeypadPart # KTP-16212SLI

SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Keypad Type = Eight bit output keypad

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


revision 6 — 81

Essex Keypads


RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

Brown - LED wire

Black - Ground

Orange

Red - Vcc

Green - Data 0

White - Data 1

Yellow - LED wire

Tan - Case Ground

Blue

1 2

3 4

5 6

7 8

9 0

∗ #

Essex KeypadPart # KTP-16212SLI

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Keypad Type = Eight bit output3. Jumper J4 must be set to 12 VDC4. 2-wire LED control

82 — revision 6


15.2. Essex Keypad Reader #KTP-163SN


GND

12 VDC Power Supply

Brown - LED wire

Black - Ground

Orange

Red - Vcc

Green - Data 0

White - Data 1

Yellow - LED wire

Tan - Case

Blue - CCTV

31 2

64 5

97 8

#∗ 0

Essex KeypadPart # KTP-163SN

SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Keypad Type = Eight bit output

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


revision 6 — 83

Essex Keypads


RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

31 2

64 5

97 8

#∗ 0

Brown - LED wire

Black - Ground

Orange

Red - Vcc

Green - Data 0

White - Data 1

Yellow - LED wire

Tan - Case Ground

Blue - CCTV

Essex KeypadPart # KTP-163SNSOFTWARE SETTINGS

1. Reader Type = Wiegand/Prox2. Keypad Type = Eight bit output3. Jumper J4 must be set to 12 VDC4. Jumper J2 must be set to Unregulated

Mode.5. 2-wire LED control

84 — revision 6


16. HID Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and HID readers.

16.1 HID ProxPro


1 - DC+

2 - GND

3 - Data 0

4 - Data 1

5 - Data RTN

6 - Green LED

7 - Red LED

8 - Beeper

9 - Hold

10 - COM

11 - Tamper

TB1

Tamper SW123

P3

P1

1 2 3

SW1

HID ProxPro

12 VDC +Power Supply(125 mA)-

TYPICAL SOFTWARE SETTINGS1. Reader Type - Wiegand/Prox2. HID-09 kepad - eight-bit output keypad

HID-00 keypad - four-bit output keypad

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


revision 6 — 85

HID Readers


1 - DC+

2 - GND

3 - Data 0

4 - Data 1

5 - Data RTN

6 - Green LED

7 - Red LED

8 - Beeper

9 - Hold

10 - COM

11 - Tamper

TB1

Tamper SW123

P3

P1

1 2 3

SW1

HID ProxPro

RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND


TYPICAL SOFTWARE SETTINGS1. Reader Type - Wiegand/Prox2. HID-09 kepad - eight-bit output keypad

HID-00 keypad - four-bit output keypad* Use the 1320 in Unregulated Mode (jumper J2)

86 — revision 6


16.2 HID MaxiProx 5370 A-1


B

A

J3

U1

J4

REA

DER

IN

TER

FAC

EN C C N O N O N C C + 12

V

GN

D

I2-

I2+

I1+

I1+

K1 K2

1

2 3

4

5 6

7

8

J2GN

D

BZ

R

LED

CLK

/D1

DA

T/D

0

+12

V

TR

+

TR

-

SG

Neutral (white)Hot (black)

Ground (green)

11 - Tamper Select10 - Tamper Common9 - Hold (blue)8 - Beeper (yellow)7 - Red LED (brown)6 - GRN (orange)5 - Data RTN (black)4 - Data-1 (white)3 - Data-0 (green)2 - Ground (black)1 - +DC (red)

on

8 7 6 5 4 3 2 1

Fuse

AC

A

C-

BA

T +

+ DC -

1234

ON

SMP5PM

24VDC

Fuse

AC

AC

- B

AT

+

+ DC -

1234

ON

SMP3PM

12VDC

HIDMaxiProx5370 A-1

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. No keypad

revision 6 — 87

HID Readers

16.3 HID MaxiProx 5370/5375AGN00


D1 D2

INP

UT

S

IN 1

IN 2

IN 3

IN 4

IN 5

IN 6

IN 7

IN 8

IN 9

GND

IN 10

U10

J4

IN - 5VOUT - 12V

RDR POWERREG UNREG

J2

GND

DAT

CLK

BZ

A L

EO

VO

D0

D1G

ND D

AT C

LK

BZA

LEO

V

OD0

D1 R

EAD

ER 2

REA

DER

1

SN

RE

V

PN

RS

-485

TR +

TR -

R +

R -

SG

12V

ACDC

AC

GND

J6

J5

J5, J6TERMINATOR

2W 4WJ3

RS-485

U1

U2OFF ON

S1

8 7

6 5

4

3 2

1

NO

C

N

C

NO

C

N

CRL

Y 2

RLY

1NO

C

NC

N

O

C

NC

RLY

4

R

LY 3

NO

C

N

C

NO

C

N

CRL

Y 6

RLY

5

C2

C1

COM k5

NC

NO

C2

C1

COM k3

NC

NO

C2

C1

COM k1

NC

NO

C2

C1

COM k2

NC

NO

C2

C1

COM k4

NC

NO

C2

C1

COM k6

NC

NO

TB

1T

B2

TB

3T

B4

TB

5T

B6

TB

7

R120

TB12

TB

11

TB10

TB9C3

TB8

Neutral (white)Hot (black)

Ground (green)

11 - Tamper Select10 - Tamper Common9 - Hold (blue)8 - Beeper (yellow)7 - Red LED (brown)6 - GRN (orange)5 - Data RTN (black)4 - Data-1 (white)3 - Data-0 (green)2 - Ground (black)1 - +DC (red)

on

8 7 6 5 4 3 2 1

Fuse

AC

A

C-

BA

T +

+ DC -

1234

ON

SMP5PM

24VDC

Fuse

AC

AC

- B

AT

+

+ DC -

1234

ON

SMP3PM

12VDC

HIDMaxiProx5370 A-1


88 — revision 6


16.4 Hughes MiniProx


1 - DC+

2 - GND

3 - DATA "0"

4 - DATA "1"

5 - DATA RTN

6 - Green LED

7 - Red LED

8 - Beeper

9 - Hold

Red

Black

Green

White

Black

Orange

Brown

Yellow

Blue

N/C

N/C

Hughes MiniProx ReaderTYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. No keypad

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


N/C

revision 6 — 89

HID Readers


VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND

RE

AD

ER

1R

EA

DE

R 2


1 - DC+

2 - GND

3 - DATA "0"

4 - DATA "1"

5 - DATA RTN

6 - Green LED

7 - Red LED

8 - Beeper

9 - Hold

Red

Black

Green

White

Black

Orange

Brown

Yellow

BlueN/C

Hughes MiniProx Reader

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. No keypad* Use Unregulated Mode for the 1320, jumper J2

N/C

N/C

90 — revision 6


16.5 Classic, EPIC Swipe and Pinpad Wiegand Readers



+ 12 VDC

- GND


GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


HID Classic Swipe Reader, EPIC SwipeReader, or Pinpad Wiegand Reader

Black - Ground

Brown - Red LED

Violet - Green LED

White - Data 1

Green - Data 0

Red - 5-12 VDC

Blue - not used

Yellow - not used

Orange - notused

TYPICAL SOFTWARE SETTINGS1. 2-Wire LED Support2. No keypad3. Wiegand/Prox data type* Use unregulated mode for the 1320, Jumper J2

HID Classic Swipe Reader, EPIC SwipeReader, or Pinpad Wiegand Reader

Red - 5-12 VDC

Violet - Green LED

Brown - Red LED

White - Data 1

Green - Data 0

Black - Ground

Blue - not used

Yellow - not used

Orange - notused

RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND


revision 6 — 91

HID Readers

16.6 ProxPoint Readers




H I D

ProxPoint Reader

White - Data 1

Green - Data 0

Black - Ground

Orange - LED


GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

Red - 5-12 VDC

Yellow - BZR


Red - 5-12 VDC

White - Data 1

Green - Data 0

Black - Ground

Yellow - BZR

RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND


H I D

ProxPoint Reader

Orange - LED

92 — revision 6


16.7 ProxPro II

The ProxPro II reader (model number 5455BBn00) operates at 5-16 VDC. The average current draw at 12 VDC is 30 mA. The LEDs and buzzer function in the same way as standard HID Wiegand/proximity readers.


Orange

Yellow

White

Green

Red

Black


HID

DATA/D0

VO

LED

BZR

CLK/D1

GND

Drain wire & Shield

to Ground



revision 6 — 93

HID Readers



HID

Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Orange

Yellow

White

Green

Red

BlackShield

to Drain

Ground



94 — revision 6


16.8 iCLASS RW300, RW400 Readers/Encoders

The RW300/RW400 Readers/Encoders operate at 10-16 VDC. The average current draw is 80-260 mA. When communication to the reader is successful, the LED lights solid green.

Note: Due to timing issues with the encoder, this unit cannot be connected to a multiport serial adapter.The 6121BKT0000PRGL version of the RW400 can only be purchased directly from Lenel.

Wiring Function DB9 pin-out (female)

Yellow Speaker Not used

Blue Hold Not used

Violet Open collector Not used

White Data 1 Not used

Green Data 0 Not used

Orange Green LED Not used

Brown Red LED Not used

Red +DC (10-16 VDC) +DC (10-16 VDC)

Black Ground DC Ground

Gray RX (serial receive) Pin 3

Red/Green DSR Not used

Pink TX (serial transmit) Pin 2

Red/Yellow DTR Not used

Drain Shield ground Pin 5

HID

PIN 2PIN 3

PIN 5

To DB9 SerialCommunication

Port on PC

revision 6 — 95

HID Readers

When configuring the access control software, this encoder will most likely be a standalone device connected to the workstation. Be sure to select a unique name for the encoder. Select HID iCLASS for the device type and iClass for the card technology.

Typical Communication Settings

• Comm. port: configurable

• Baud rate: 57600

• Data bits: 8 bit

• Parity: Even

• Stop bits: 2

96 — revision 6


16.9 iCLASS and multiCLASS Legacy and SE Readers

iCLASS Wiegand Reader Power Specifications

HID LCD and bioCLASS models RWKL550 and RWKLB575 are supported as either Wiegand or OSDP readers.

Note: HID LCD and bioCLASS models RWKL550 and RWKLB575 are supported as either Wiegand or OSDP readers. These readers must be wired differently for OSDP support. For more information about OSDP configuration, refer to HID LCD and bioCLASS Readers (RWKL550/RWKLB575) Wired for OSDP Support on page 108.


iCLASS R10 5 to 16 VDC 55 mA average, 116 mA peak




iCLASS RK40 5 to 16 VDC 85 mA average, 116 mA peak

iCLASS SE R10 5 to 16 VDC 55 mA average, 116 mA peak




iCLASS SE RK40 5 to 16 VDC 100 mA average, 130 mA peak

iCLASS RP40 5 to 16 VDC 55 mA average, 141 mA peak

iCLASS RPK40 5 to 16 VDC 85 mA average, 169 mA peak

iCLASS RS10 5 to 16 VDC 85 mA average, 116 mA peak

iCLASS RS40 5 to 16 VDC 55 mA average, 121 mA peak

iCLASS RSK40 5 to 16 VDC 85 mA average, 116 mA peak

iCLASS RWKL550 9 to 12 VDC 160 mA average, 250 mA peak

iCLASS RWKLB575 9 to 12 VDC 245 mA average, 299 mA peak

multiCLASS SE RP10 5 to 16 VDC 60 mA average, 100 mA peak




multiCLASS SE RPK40 5 to 16 VDC 110 mA average, 130 mA peak

revision 6 — 97

HID Readers


Note: Wire colors shown in the HID iCLASS Reader column only apply to readers with a pigtail cable. Connect reader’s cable drain shield (P1-5) to earth ground.



From LNL-1300 To HID iCLASS Reader Typical Software Settings

Reader Terminal

Pin Pin (wire color) Description • Reader Type = Wiegand/Prox



TB4

GND P1-3 (black) Ground (RTN)

BZR P1-6 (brown) Red LED

LED P1-2 (orange) Green LED

CLK D1 P2-4 (white) Wiegand Data 1 (clock)

DAT D0 P2-3 (green) Wiegand Data 0 (data)

V0 P1-4 (red) +VDC

From LNL-1320 To HID iCLASS Reader Typical Software Settings

Reader 1 or Reader 2 Pin Pin (wire color) Description • Reader Type = Wiegand/Prox








V0 P1-4 (red) +VDC

98 — revision 6





Notes: Do not connect the HID iCLASS Reader to the J15 and J18 terminals on the LNL-1320-U.

Wire colors shown in the HID iCLASS Reader column only apply to readers with a pigtail cable. Connect reader’s cable drain shield (P1-5) to earth ground.

From LNL-1300-U To HID iCLASS Reader Typical Software Settings

Reader Terminals




J10




J13

LED1 P1-2 (orange) Green LED

LED2 P1-6 (brown) Red LED

BZR P1-1 (yellow) Beeper

V0 P1-4 (red) +VDC

From LNL-1320-U To HID iCLASS Reader Typical Software Settings

Reader Terminals




J10




J13




V0 P1-4 (red) +VDC

revision 6 — 99

HID Readers

16.10 multiCLASS RMP40 and RMPK40 Readers

multiCLASS Reader Power Specifications


Note: Wire colors shown in the HID multiCLASS Reader column only apply to readers with a pigtail cable. Connect reader’s cable drain shield (P1-5) to earth ground.


multiCLASS RMP40 5 to 16 VDC 90 mA average, 166 mA peak

multiCLASS RMPK40 5 to 16 VDC 110 mA average, 169 mA peak

From LNL-1300 To HID multiCLASS Reader Typical Software Settings

Reader Terminal

Pin Pin (wire color) Description • Reader Type = Mag with Wiegand out

• Keypad = No Keypad (RMP40) or Keypad (RMPK40)

• LED Mode = 2-Wire LED ControlTB4

GND P1-3 (black) Ground (return)





V0 P1-4 (red) +VDC

100 — revision 6






From LNL-1320 To HID multiCLASS Reader Typical Software Settings

Reader 1 or Reader 2 Pin

Pin (wire color) Description • Reader Type = Mag with Wiegand out








V0 P1-4 (red) +VDC

From LNL-1300-U To HID multiCLASS Reader Typical Software Settings

Reader Terminals




J10




J13




V0 P1-4 (red) +VDC

revision 6 — 101

HID Readers


Note: Do not connect the HID multiCLASS Reader to the J15 and J18 terminals on the LNL-1320-U. Wire colors shown in the HID multiCLASS Reader column only apply to readers with a pigtail cable. Connect reader’s cable drain shield (P1-5) to earth ground.

16.11 EntryProx 4045-905

The EntryProx is a standalone reader. It is ideal for providing single-door proximity access control.

In this configuration, the keypad does not send separate key data. When the keypad is used, it outputs the cardholder/badge ID number.

The system transmits keypad PINs while operating in Wiegand mode by processing any digit sequence terminated with the [*] key as 26-bit Wiegand data. The current facility code (set using Code 32 - 2) will be used. Entering any PIN over 65535 will cause an error condition and no data will be sent.

Because keypad data is sent in a card data format, it may not be possible to perform card and PIN operation. If 26-bit format as PIN data cannot be interpreted, be sure to enter it into the badge ID field, and not the keypad PIN number field.

From LNL-1320-U To HID multiCLASS Reader Typical Software Settings

Reader Terminals




J10




J13




V0 P1-4 (red) +VDC

102 — revision 6




Blue - not used

Green - Wiegand Data 0

White - Wiegand Data 1

Brown - Wiegand LED

DATA/D0

VO

LED

BZR

CLK/D1

GND

revision 6 — 103

HID Readers


16.12 SensorKey Reader

This reader operates at 40 mA at 5-12 VDC.


Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Blu

e -

not u

sed

Red +12 VDC

Brown - Wiegand LED

White - Wiegand Data 1

Green - Wiegand Data 0

Black - Ground

104 — revision 6




1. Reader Type = WIEGAND / PROX2. Keypad = No Keypad

3. LED Mode = 1 or 2-WIRE LED CONTROL


Tie to Earth Ground

DATA/D0

VO

LED

BZR

CLK/D1

GND

(Brown)

(White)

(Green)

(Black)

(Red)

(Blue)

revision 6 — 105

HID Readers


16.13 HID MIFARE 6055

This reader operates at 9-14 VDC (16 VDC maximum). The average current draw is 100mA at 12 VDC. A linear power supply recommended.


1. Reader Type = WIEGAND / PROX2. Keypad = No Keypad 3. LED Mode = 1 or 2-WIRE LED CONTROL


Tie to Earth Ground

DATA/D0

VO

LED

BZR

CLK/D1

GND

(Brown)

(White)

(Green)

(Black)

(Red)

(Blue)

106 — revision 6





GND

BZR

LED

CLK/D1

DATA/D0

VO

Yellow

Brown

White

Green

Black

Red

TYPICAL SOFTWARE SETTINGS1. Reader Type = WIEGAND/PROX2. Keypad = NO KEYPAD3. LED Mode = 2-WIRE LED CONTROL

Other wires not used

MIFAREHID


Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

Yellow

White

Green

Red

Black


MIFAREHID

Other wires not used

revision 6 — 107

HID Readers

16.14 HID LCD and bioCLASS Readers (RWKL550/RWKLB575) Wired for OSDP Support

HID LCD and bioCLASS models RWKL550 and RWKLB575 are supported as either Wiegand or OSDP readers.

Note: HID LCD and bioCLASS models RWKL550 and RWKLB575 must be wired differently for Wiegand support. For more information about Wiegand configuration, refer to iCLASS and multiCLASS Legacy and SE Readers on page 97.

16.14.1 Wiring the LNL-1300 (OSDP)


Series 2

DATA/D0

VO

LED

BZR

CLK/D1

GND

NC+DC-DC

NCNC

NCNC

GPIO1

GPIO1

GPIO2

Back of Reader

NCNCNCNCNC

To 12VDC

GPIO2

Tie to DC-


1. Reader Type = OSDP Protocol2. Keypad = Eight Bit Output Keypads3. LED Mode = OSDP LCD Reader

108 — revision 6


16.14.2 Wiring the LNL-1320 (OSDP)

16.15 HID MIFARE Format Secure 6075 Reader

The reader operates at 9 -16 VDC. The average current draw is 15mA/75mA.


Series 2

NC+DC-DC

NCNC

NCNC

GPIO1

DATA/D0

VO

LED

BZR

CLK/D1

GND

GPIO1

GPIO2

Back of Reader

NCNCNCNCNC

To 12VDC

GPIO2

Tie to DC-


1. Reader Type = OSDP Protocol2. Keypad = Eight Bit Output Keypads3. LED Mode = OSDP LCD Reader

revision 6 — 109

HID Readers


Brown

White

Green

Red

Black

DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to Earth Ground




110 — revision 6



16.16 HID OSDP Readers

Models 6100BKP through 6181BKP are supported. To use OSDP readers with OnGuard, version 5.12.110 or higher is required. Only Series 2 reader ports offer OSDP support.

Reade

r 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

White

Green

Red

Black

Tie to Earth Ground




revision 6 — 111

HID Readers


Series 2 Single Reader Interface Module

DATA/D0

VO

LED

BZR

CLK/D1

GND

NC+DC-DC

NCNC

NCNC

GPIO1

GPIO1

GPIO2

Back of Reader

NCNCNCNCNC

To 12VDC

GPIO2

Tie to DC-

Not Used

Not Used

Not used for 6171/6181


1. Reader Type = OSDP Protocol2. LED Mode = OSDP Reader for all except 6171 and 6181, OSDP LCD Reader for 6171, and 6181

112 — revision 6



Intelligent Dual Reader Controller/Series 2 Dual Reader Interface Module

NC+DC-DC

NCNC

NCNC

GPIO1

DATA/D0

VO

LED

BZR

CLK/D1

GND

GPIO1

GPIO2

Back of Reader

NCNCNCNCNC

To 12VDC

GPIO2

Tie to DC-

Not used for 6171/6181

Not Used

Not Used


1. Reader Type = OSDP Protocol2. LED Mode = OSDP Reader for all except 6171 and 6181, OSDP LCD Reader for 6171 and 6181

revision 6 — 113

HID Readers

16.17 SmartID/SmartTRANS Models S10, SK10, SP10, SPK10

SmartID/SmartTRANS Reader Power Specifications




SmartID S10 5 to 24 VDC 68 mA average,82 mA peak

SmartID SK10 4.5 to 16 VDC 1.5 W average,2.0 W peak

SmartTRANS SP10 5 to 24 VDC 79 mA average,96 mA peak

SmartTRANS SPK10 5 to 24 VDC 79 mA average,96 mA peak

From LNL-1300 To HID SmartID/SmartTRANS Reader Typical Software Settings

Reader Terminal

Pin Pin Description • Reader Type = Wiegand/Prox


TB4

GND 7 Ground

BZR 2 Red LED

LED 1 Green LED

CLK D1 3 Data/D1

DAT D0 4 Clock/D0

V0 8 Power (5-12 VDC)

114 — revision 6






From LNL-1320 To HID SmartID/SmartTRANS Reader Typical Software Settings

Reader 1 or Reader 2 Pin Pin Description • Reader Type = Wiegand/Prox


GND 7 Ground

DAT D0 3 Data/D1

CLK D1 4 Clock/D0

BZR 2 Red LED

LED 1 Green LED


From LNL-1300-U To HID SmartID/SmartTRANS Reader Typical Software Settings

Reader Terminals



J10

GND 7 Ground

DAT D0 3 Data/D1

CLK D1 4 Clock/D0

J13

LED1 1 Green LED

LED2 4 Red LED

BZR 5 Buzzer Input


revision 6 — 115

HID Readers


Notes: Do not connect the HID SmartID/SmartTrans Reader to the J15 and J18 terminals on the LNL-1320-U.


From LNL-1320-U To HID SmartID/SmartTRANS Reader Typical Software Settings

Reader Terminals



J10

GND 7 Ground

DAT D0 3 Data/D1

CLK D1 4 Clock/D0

J13

LED1 1 Green LED

LED2 4 Red LED

BZR 5 Buzzer Input


116 — revision 6


16.18 ThinLine II Proximity Reader

ThinLine II Reader Power Specifications






ThinLine II 5 to 16 VDC 20 mA average,115 mA peak

From LNL-1300 To HID ThinLine II Reader Typical Software Settings

Reader Terminal



TB4

GND Black Ground

BZR Yellow Beeper

LED Orange Green LED

CLK D1 White Data 1 (Clock)

DAT D0 Green Data 0 (Data)

V0 Red +5 - 16 VDC

From LNL-1320 To HID ThinLine II Reader Typical Software Settings



GND Black Ground



BZR Yellow Red LED



revision 6 — 117

HID Readers




Notes: Do not connect the HID ThinLine II reader to the J15 and J18 terminals on the LNL-1320-U.

Connect reader’s cable drain shield (P1-5) to earth ground.

From LNL-1300-U To HID ThinLine II Reader Typical Software Settings

Reader Terminals



J10

GND Black Ground



J13

LED1 Orange Green LED

LED2 Brown Red LED

BZR Yellow Buzzer Input


From LNL-1320-U To HID ThinLine II Reader Typical Software Settings

Reader Terminals



J10

GND Black Ground



J13


LED2 Brown Red LED



118 — revision 6


16.19 ProxPro 5355 Proximity Reader

ProxPro 5355 Reader Power Specifications






ProxPro 5355 10 to 28.5 VDC 100 mA average,120 mA peak

From LNL-1300 To HID ProxPro Reader Typical Software Settings

Reader Terminal




TB4

GND 2 Ground (RTN)

BZR 8 Beeper

LED 6 Green LED

CLK D1 4 Wiegand Data 1 (clock)

DAT D0 3 Wiegand Data 0 (data)

V0 1 +VDC

From LNL-1320 To HID ProxPro Reader Typical Software Settings

Reader 1 or Reader 2 Pin Pin Description • Reader Type = Wiegand/Prox



GND 2 Ground (RTN)



BZR 8 Red LED

LED 6 Green LED

V0 1 +VDC

revision 6 — 119

HID Readers




Notes: Do not connect the HID ProxPro Reader to the J15 and J18 terminals on the LNL-1320-U.


From LNL-1300-U To HID ProxPro Reader Typical Software Settings

Reader Terminals




J10

GND 2 Ground (RTN)



J13

LED1 6 Green LED

LED2 7 Red LED

BZR 8 Beeper

V0 1 +VDC

From LNL-1320-U To HID ProxPro Reader Typical Software Settings

Reader Terminals




J10

GND 2 Ground (RTN)



J13

LED1 6 Green LED

LED2 7 Red LED

BZR 8 Beeper

V0 1 +VDC

120 — revision 6


17. IDH Max

IDH Max readers include all door components – a reader device, lock set, door contact, and request to exit sensors.

17.1. IDH Max Door Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and IDH Max readers.

revision 6 — 121

IDH Max


B AJ3

U1

J4

SINGLE READER INTERFACE MODULE

NCC

NO

NONC

C

+12VGNDI2-I2+I1+

I1+ 1 2 3 4 5 6 7 8

J2

GND

BZRLED

CLK/D1DAT/D0

+12VTR+TR-SG

CP

NC

NC

GN

DB

PR

GR

NR

ED

D1

D0

ST

KR

Q ED

SL

S

1

Black

BrownWhiteGreen

To 12VDC

Ora

nge

Gre

en

Red

Bla

ck

Off

On

TYPICAL SOFTWARE SETTINGS 1. Reader Type = Dependant on Model WIEGAND/PROX – HID Reader/iClass ALL OTHER READERS – Mag Reader 2. Keypad = NO KEYPAD 3. LED Mode = 1-Wire LED Control

IDH MAX PANEL INTERFACE

12V GND COM+ COM- 12V GND

122 — revision 6



DUAL READER INTERFACE MODULE

NC

C

NO

IN 2

IN 1

GND

BZRLED

CLK/D1

DAT/D0

+12VC

PN

CN

CG

ND

BP

RG

RN

RE

DD

1D

0S

TK

RQ E

DS

LS

12V GND COM+ COM-12V GND

1

To 12VDC

Ora

nge

Gre

en

Red

Bla

ck

Off

On

TYPICAL SOFTWARE SETTINGS 1. Reader Type = Dependant on Model WIEGAND/PROX – HID Reader/iClass ALL OTHER READERS – Mag Reader 2. Keypad = NO KEYPAD 3. LED Mode = 1-Wire LED Control

IDH MAX PANEL INTERFACE

NCC

NO

Rea

der

1R

LY 1

R

LY

2

revision 6 — 123

IDH Max

124 — revision 6


18. ID Solutions Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and ID Solutions readers.

18.1. ID Solutions Model 8030/8035 Bar Code Reader



Red - DC Input

Black - Supply Ground

White - Data 1/Clock

Green - Data 0/Data

Brown - LED Control Input

ID SolutionsBar Code Reader,Model 8030/8035

GND

12 V Power Supply


1. Reader Type = All other readers2. No keypad

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

revision 6 — 125

ID Solutions Readers


Red - DC Input

Black - Supply Ground

White - Data 1/Clock

Green - Data 0/Data

Brown - LED Control Input

REA

DER

1R

EAD

ER 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

ID SolutionsBar Code Reader,Model 8030/8035

TYPICAL SOFTWARE SETTINGS1. Reader Type = All other readers2. No keypad3. Use the 1320 in Unregulated Mode (jumper J2)

126 — revision 6


19. Infographics Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Infographics readers.

19.1. Infographics Reader OTD-60


Bla

ck -

Ye

llow

LE

D (

no

t u

sed

)


1. Grey - 0 Volts

Brown - Reader Clock

Yellow - Reader Data

4. Green - +5 Volts

Red - Green LED

InfographicsReader OTD-60

Orange - Red LED

8. Blue - Frame Ground

EARTH GROUND

5 V Power Supply

5+ GND


1. Reader Type = All other readers2. No keypad

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

revision 6 — 127

Infographics Readers


1. Grey - 0 Volts

2. Brown - Reader Clock

3. Yellow - Reader Data

4. Green - + 5 Volts

5. Red - Green LED

REA

DER

1R

EAD

ER 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

5V Voltage JumperSettings, See manualfor volt and currentrecommendations.

InfographicsReader OTD-60

6. Black - Yellow LED (not used)

7. Orange - Red LED

8. Blue - Frame Ground

EARTH GROUND

5V+

TYPICAL SOFTWARE SETTINGS1. Reader Type = All other readers2. Jumper J4 must be set to 5 VDC3. 2-wire LED control

128 — revision 6


20. Integrated Engineering Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Mifare readers.

20.1. Integrated Engineering PX007 Mifare Reader

The following information applies for these Integrated Engineering reader models: PX007Z/MFSNR, PX007MF/Read Only, and PX007MF/RS232(B).

The reader operates between 4.75 and 12.25 VDC and has an average draw of 50 mA. Therefore, the reader can be directly powered from the reader interface modules. The reader can output both standard Clock and Data or standard Wiegand data. To get proper LED functionality, the reader must be set up for 2-wire LED mode. Please follow the diagrams for proper wiring of the reader.


ENGINEERING

INTEGRATED

Terminal on Backof Reader

(8)

(7)

(6)

(5)

(4)

(3)

(2)

(1)

5-12 VDC

Ground

Clock / D0

Data / D1

Green LED

Red LED


VO

LED

BZR

CLK/D1

DATA/D0

GND



revision 6 — 129

Integrated Engineering Readers


Re

ad

er 1

VO

LED

BZR

CLK/D1

DATA/D0

GND


Terminal on Backof Reader

(8)

(7)

(6)

(5)

(4)

(3)

(2)

(1)

5-12 VDC

Ground

Clock / D0

Data / D1

Green LED

Red LEDENGINEERING

INTEGRATED



130 — revision 6


20.2. Desfire Reader

This reader operates at +4.75 to +12.25 VDC. The average current draw is 50 mA.


DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to Earth Ground


1 2 3 4 5 6 7 8

Connector Pin Block

Pin 7

Pin 2

Pin 1

Pin 3

Pin 4

Pin 8


Desfire Serial Reader Type – WIEGAND/PROXDesfire Sector Reader Type – ALL OTHER READERS

1. Reader Type = Dependant on Model #*2. Keypad = No Keypad3. LED Mode = 2-WIRE LED CONTROL

revision 6 — 131

Integrated Engineering Readers



Rea

der

1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Tie to Earth Ground

1 2 3 4 5 6 7 8

Connector Pin Block

Pin 8

Pin 1

Pin 2

Pin 3

Pin 4

Pin 7


Desfire Serial Reader Type – WIEGAND/PROXDesfire Sector Reader Type – ALL OTHER READERS

1. Reader Type = Dependant on Model #*2. Keypad = No Keypad3. LED Mode = 2-WIRE LED CONTROL

132 — revision 6


21. Keri Systems Readers

Use the following diagrams to wire (single wire LED control) Single/Dual Reader Interface Modules and Keri Systems readers.

21.1. Cascade and Sierra Readers (P-300, P-400, P-500, P-600 with Keypad, P-700)

The Keri Systems Readers operate at 12 VDC. All the reader models require an alternate 12 VDC power source when being connected to the Single Reader Interface. They cannot be powered from the reader interface module. The readers also feature Prox by HID Technology (optional) which allows them to be compatible with ProxCard II, ISO Prox II, ProxKey II in 26-bit and other customer HID card format.

Note: The keypad for the P-600 is 8-bit output.


GND

12 V Power Supply

Silver - Shield

Black - Ground

Brown - Single LED

Blue - Beeper

White - Data 1

Green - Data 0

Red - Power

Orange - not used

Cascade Reader /Sierra Reader

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Jumper J4 must be set to 12 VDC3. LED Mode = Single Wire LED Control


GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

revision 6 — 133

Keri Systems Readers


The P-400, P-600, and P-700 require a separate 12 VDC power source. They cannot be powered from the panel.

The current draws for each reader are as follows: P-300: 80mA

P-400: 90mA

P-500: 80mA

P-600: 100mA

P-700: 285mA

RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

12 VDC +

Silver - Shield

Green - Data 0

Blue - Beeper

Red - Power

Black - Ground

Orange - not used

White - Data 1

Brown -Single LED

Cascade Reader /Sierra Reader

SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Jumper J4 must be set to 12 VDC3. LED Mode = Single Wire LED Control4. Use Unregulated Mode for jumper J2

134 — revision 6


22. Magtek Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Magtek readers.

22.1. Magtek 101-Millimeter Swipe Reader (Model 2105002)

This reader operates at 2.4 to 5.5 VDC at 1 mA typical.


Green

Yellow

Orange


DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to Earth

Ground

2.4 to 5.5 VDC

Power Supply

Red (Vcc)

Brown (GND)


1. Reader Type = ALL OTHER READERS2. Keypad = NO KEYPAD3. LED Mode = 1 WIRE LED CONTROL

revision 6 — 135

Magtek Readers



DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to Earth

Ground

2.4 to 5.5 VDC

Power Supply

Red (Vcc)

Brown (GND)

Orange

Yellow

Green

TYPICAL SOFTWARE SETTINGS1. Reader Type = ALL OTHER READERS2. Keypad = NO KEYPAD3. LED Mode = 1 WIRE LED CONTROL

136 — revision 6


23. Mifare Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Mifare readers.

23.1. Mifare Model LA-WIW-PROXKEY-M




1. Reader Type = All other readers2. LED Mode = 2-Wire LED Control

1 2 3 4 5 6

Mifare Model(LA-WIW-PROXKEY-M)

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

revision 6 — 137

Mifare Readers


RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

Mifare ReaderModel

(LA-WIW-PROXKEY-M)

TYPICAL SOFTWARE SETTINGS1. Reader Type = All other readers2. Jumper J4 must be set to 5 VDC3. LED Mode = 2 Wire LED Control4. Use Unregulated Mode for the 1320, jumper J2

5 VDC +

1 2 3 4 5 6

138 — revision 6


23.2. Iolan Reader Model LA-XXW-PRXKY-MX 1050-4021-092



TYPICAL SOFTWARE SETTINGS:

1. Reader Type = Single Interface (Weigand/Prox)2. LED Mode = 2 Wire LED Control3. Pins 3 and 9 should be jumpered together4. Dip switch 1 should be set to on

1 2 3 4 5 6 7 8 9

O N

12

34

56

78

Iolan(LA-XXW-PRXKY-MX 1050 -

4021 - 092)

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG

revision 6 — 139

Mifare Readers


RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND

TYPICAL SOFTWARE SETTINGS:

1. Dipswitch 1 should be set On2. Pins 3 and 9 should be jumpered together3. Reader Type = Single Interface (Weigand/Prox)4. LED Mode = 2 Wire LED Control

1 2 3 4 5 6 7 8 9

ON

12

34

56

78

Iolan(LA-XXW-PRXKY-MX 1050 -

4021 - 092)


140 — revision 6


24. Motorola Indala Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Indala readers.

24.1. Indala Readers ASR-120, ASR-122


Red

Black

Blue

White

Brown

Green

Antenna PWR (+)

Antenna PWR (-)

Green LED Out

Red LED Out

Beeper Out

Antenna

- DC PWR In (+)

- DC PWR In (-)

DATA "0" Out)

DATA "1" Out

Red

Black

Green

White

Brown

Blue

Red LED

Beeper In

ARE-142Interface Module

INDALAREADERSASR-120,ASR-122

GND

12 VDCPower Supply


GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


revision 6 — 141

Motorola Indala Readers


Red

Black

Blue

White

Brown

Green

Antenna PWR (+)

Antenna PWR (-)

Green LED Out

Red LED Out

Beeper Out

Antenna

- DC PWR In (+)

- DC PWR In (-)

DATA "0" Out)

DATA "1" Out

Red

Black

Green

White

Brown

Blue

Red LED

Beeper In

ARE-142Interface Module

INDALAREADERS

ASR-120, ASR-122

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND

RE

AD

ER

1R

EA

DE

R 2


TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. No keypad* Use Unregulated Mode for the 1320, jumper J2

142 — revision 6


24.2. Indala Readers ASR-503, ASR-505, ASR-110, ASR-112

The ASR-503, ASR-505, and ASR-110, depending on the model, can support 1-wire LED control or 2-wire LED control. Model numbers ending with “22” are 1-wire LED control, and models ending with “00” are 2-wire LED control. The following diagrams use the orange wire, and are for 2-wire LED control.


DC+

GND - DATA RTN

Red LED

Green LED

Data "1"

Data "0"

INDALA READERSASR-503ASR-505

ASR-110, ASR-112

Red

Black

Brown

Orange

White

Green

GND 12 VDC

Power Supply Reader CurrentRequirements:ASR-503, 505: 45 mAASR-110, 112: 180 mA


GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


revision 6 — 143



RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

DC+

GND - DATA RTN

Red LED

Green LED

Data "1"

Data "0"

INDALA READERSASR-503ASR-505

ASR-110, ASR-112

Red

Black

Brown

Orange

White

Green

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. No keypad* Use unregulated mode for the 1320, jumper J2

144 — revision 6


24.3. Indala Readers ASR-103, ASR-105, ASR-120, ASR-122, ASR-124, ASR-136

24.3.1 Wiring the LNL-1300 (Single LED Control Line Configuration)

TB1

A Antenna

B Beeper Out

C LED Out

D Do not use

E Antenna PWR (-)

F Antenna PWR (+)

ARE-142Remote Electronics

TB2

1 Do not use

2 Do not use

3 Do not use

4 Data '1' Out

5 Data '0' Out

6 Beeper In

7 Do not use

8 LED In

9 DC PWR In (-)

10 DC Power In (+)

EARTH GROUND

Blue

Green

Brown

White

Black

Red

Do Not Connect Screen (Shield)

(White)

(Green)

(Blue)

(Brown)

(Black)

(Red)

Screen (Shield)

Antenna Cable

Extension Cable

ColorCode

SuggestedColor Code

ColorCode

Splice here

ASR-103, ASR-105,ASR-120, ASR-122,ASR-124, ASR-136

Reader

-

+

LinearPowerSupply


GND

BZR

LED

CLK/D1

DAT/D0

+12V

Single ReaderInterfaceModule

revision 6 — 145


24.3.2 Wiring the LNL-1320 (Single LED Control Line Configuration)


TB2

1 Do not use2 Do not use3 Do not use

4 Data '1' Out

5 Data '0' Out

6 Beeper In

7 Do not use

8 LED In

9 DC PWR In (-)

10 DC Power In (+)

EARTH GROUND

(White)

(Green)

(Blue)

(Brown)

(Black)

(Red)

Screen (Shield)

SuggestedColor Code

ColorCode

TB1

A Antenna

B Beeper Out

C LED Out

D Do not use

E Antenna PWR (-)

F Antenna PWR (+)

Blue

Green

Brown

White

Black

Red


Antenna Cable

Extension Cable

ColorCode

Splice here

ASR-103, ASR-105,ASR-120, ASR-122,ASR-124, ASR-136

Reader

RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GND

12 VDCLinear

Power Supply

-

+

12V

ACDC

AC

GND

Dual ReaderInterfaceModule

See manual for volt andcurrent recommendations.


146 — revision 6


24.3.3 Wiring the LNL-1300 (Dual LED Control Line Configuration)

TB1

A Antenna

B Beeper Out

C LED Out

D Do not use

E Antenna PWR (-)

F Antenna PWR (+)


TB2

1 Do not use

2 Do not use

3 Do not use

4 Data '1' Out

5 Data '0' Out

6 Beeper In

7 Green LED In

8 Red LED In

9 DC PWR In (-)

10 DC Power In (+)

Reader

-

+

EARTHGROUND

Blue

Green

Brown

White

Black

Red


(White)

(Green)

(Blue)

(Brown)

(Black)

(Red)

Screen(Shield)

Antenna Cable

Extension Cable

ColorCode

SuggestedColor Code

ColorCode

Splice here

(Orange)

Not used

12 VDCLinear

Power Supply


GND

BZR

LED

CLK/D1

DAT/D0

+12V

Single ReaderInterfaceModule

revision 6 — 147


24.3.4 Wiring the LNL-1320 (Dual LED Control Line Configuration)

TB1

A Antenna

B Beeper Out

C LED Out

D Do not use

E Antenna PWR (-)

F Antenna PWR (+)


TB2

1 Do not use2 Do not use3 Do not use

4 Data '1' Out

5 Data '0' Out

6 Beeper In

7 Green LED In

8 Red LED In

9 DC PWR In (-)

10 DC Power In (+)

EARTHGROUND

Blue

Green

Brown

White

Black

Red


(White)

(Green)

(Blue)

(Brown)

(Black)

(Red)

Screen(Shield)

Antenna Cable

Extension Cable

ColorCode

SuggestedColor Code

ColorCode

Splice here


(Orange)

Not used

Reader

12V

ACDC

AC

GND


RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND

VO

LED

BZR

D1/CLK

D0/DATA

GND

12 VDCLinear

Power Supply

-

+

See manual for volt andcurrent recommendations.


148 — revision 6


24.4. Indala Reader ARK-501


-

+

(White)

(Green)

(Blue)

(Orange)

Splice Here

(Black)

(Red)

EARTH GROUND

Shield(Screen)

Black

(Red)

Reader CableColorCode

SuggestedColor Code

1 2 3

4 5 6

7 8 9

* 0 #

Do not connect

(Brown)

White

Green

Blue

Orange

BrownARK-501 ProxReader/Keypad

Do notconnect

Linear PowerSupply

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Keypad Type = eight bit output

GND

BZR

LED

CLK/D1

DAT/D0

+12V

TR+

TR-

SG


revision 6 — 149



12 VDCLinearPower Supply

-

+

(White)

(Green)

(Blue)

(Orange)

Splice Here

(Black)

(Red)

EARTH GROUND

Shield(Screen)

Black

(Red)

Reader Cable

ColorCode

SuggestedColor Code

1 2 3

4 5 6

7 8 9

* 0 #

Do not connect

(Brown)

White

Green

Blue

Orange

Brown

RE

AD

ER

1 VO

LED

BZR

D1/CLK

D0/DATA

GND


Do notconnect

ARK-501 ProxReader/Keypad

RE

AD

ER

2

VO

LED

BZR

D1/CLK

D0/DATA

GND

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Keypad Type = eight bit output* Use the 1320 in Unregulated Mode (jumper J2)

150 — revision 6


24.5. Indala Readers ASR-500, ASR-501, ASR-503, ASR-505, ASR-110

The ASR-503, ASR-505, and ASR-110, depending on the model, can support 1-wire LED control or 2-wire LED control. Model numbers ending with “22” are 1-wire LED control, and models ending with “00” are 2-wire LED control. The following diagrams use the blue wire, and are for 1-wire LED control.


(White)

(Green)

(Blue)

(Brown)

Splice Here

(Black)

(Red)

(White)

(Green)

(Blue)

(Orange)Do not use(Brown)

EARTH GROUND

Shield (Screen)

(Black)

(Red)

Reader Cable

Color Code

SuggestedColor Code

ASR-500 Reader,ASR-501, ASR-503, ASR-505, ASR-110

-

+

12 VDCLinear Power Supply

GND

BZR

LED

CLK/D1

DAT/D0

+12V


revision 6 — 151



(White)

(Green)

(Blue)

(Brown)

Splice Here

(Black)

(Red)

(White)

(Green)

(Blue)

(Orange)Do not use

(Brown)

Shield (Screen)

(Black)

(Red)

Reader CableColor Code

SuggestedColor Code

RE

AD

ER

1R

EA

DE

R 2

VO

LED

BZR

D1/CLK

D0/DATA

GND


VO

LED

BZR

D1/CLK

D0/DATA

GNDASR-500 Reader,

ASR-501, ASR-503, ASR-505, ASR-110

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. No keypad3. Use Unregulated Mode for the 1320, jumper J2

152 — revision 6


24.6. Motorola BiStatix Prox Reader (BXR-610)

The recommended draw is 250 mA, with an input voltage of 12 VDC. The BiStatix reader has a read range of up to 5 inches and communicates with a Wiegand output format. The operating temperatures are from -31° to 149° Fahrenheit. The reader will support Motorola FlexPass ASP+ formats as well as Motorola 60-bit UID format.




BiStatix

Brown

Blue

White

Green

Red

Black

VO

LED

BZR

CLK/D1

DATA/D0

GND




Rea

der 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

Blue

White

Green

Red

Black

BiStatix



revision 6 — 153


24.7. Indala EM4525F Reader

This reader operates at 10 - 14 VDC. The average current draw is 75 mA.




GND

BZR

LED

CLK/D1

DATA/D0

VO

Blue

Brown

White

Green

Black

Red



Re

ad

er 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

Blue

White

Green

Red

Black


154 — revision 6


24.7.3 Reader Switch Settings

24.8. Motorola FlexPass Readers

This reader operates between 4 and 16 VDC. In order to get proper LED functionality, the reader needs to be wired as follows and set up using 2-wire LED control.


Reader configuration SW1 SW2 SW3 SW4

Wiegand 40 bit output off off off ON

FlexPassMotorola

Orange

Brown

White

Green

Red

Black

VO

LED

BZR

CLK/D1

DATA/D0

GND

Single Reader Interface



revision 6 — 155



FlexPassMotorola

Re

ade

r 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Orange

Brown

White

Green

Red

Black

Dual Reader Interface



156 — revision 6


25. Nedap Readers

This particular reader is used namely for asset/cardholder tracking. It can track objects up to 38 feet from the receiver.

25.1. Nedap Transit Readers

The Nedap Transit reader operates at 24 VDC ± 10% 500 mA.


DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to EarthGround



This connection isplaced when the

Door Contact is notused

GND

0-20-3

Comm Board

PS 270 Board

25-pin FemaleDB-25 Connector


revision 6 — 157

Nedap Readers


BZR

VO

LED

DATA/D0

CLK/D1

GND

Tie to EarthGround



This connection isplaced when the

Door Contact is notused

GND

0-20-3

Comm Board

PS 270 Board

25-pin FemaleDB-25 Connector


158 — revision 6


25.1.3 Reader DIP Switches

DIP switches are located behind the Comm Board. Set the switches as follows:

25.1.4 Reader Configuration

For this reader to work properly with OnGuard, the reader must programmed via the Comm Board using a terminal connection. A null modem cable is required to program the Nedap reader. The command, SC532, must be programmed into the firmware to set the inter-ID delay on the combi-booster to 0.5 seconds to distinguish between the two IDs.

Combi-boosters combine a vehicle ID with a driver ID. Both ID numbers may be sent in a separate event message to the host computer. The delay between the two messages can be set with this timer. The vehicle ID is always transmitted first. The second event message, which contains the driver ID, must be set to a 0.5 second delay to work with the software. Timer values are stored in EEPROM and are only lost when a “reset reader” command is performed.

Note: Reprogramming the reader is case-sensitive and must be done in CAPS.

1. Connect a null modem cable to the 25-pin female connector on the Comm Board inside the Nedap Reader, and connect the DB-9 end to an open communications port on a PC.

2. Using HyperTerminal, configure the following:

1 ON

2 off

3 ON

4 ON

5 ON

6 off

7 ON

8 ON

revision 6 — 159

Nedap Readers

a. for the ASCII Setup:

b. Set the communication properties:

– BPS: 9600

– Data bits: 7

– Parity: Even

– Stop bits: 1

– Flow control: None

3. Check the current settings for the inter ID delay by typing in QC5 (must be in caps) followed by <Enter>.

4. Change the settings by typing SC532. Press <Enter>. The screen should return SC532.

5. Once again, you can check these settings by typing in QC5 followed by <Enter> to make sure the parameters were accepted.

Any error will return a question mark (?).

160 — revision 6


26. Northern Readers

26.1. Northern BR-7 Barcode Reader

The reader operates at 5-12VDC. The average current draw at 50mA.



1. Reader Type = MAG w/WIEGAND OUTPUT2. Keypad = NO KEYPAD3. LED Mode = 1-WIRE LED CONTROL


Re

ader 1

GND

BZR

LED

CLK/D1

DATA/D0

+12V

Brown

Purple

Green

Black/Orange/Yellow

Shield to Drain Ground

Red

Cable Pinout:

Red 5-12VDCBlack GroundPurple Data 1Green Data 0Brown LEDOrange ASCII SelectYellow BCD Select

revision 6 — 161

Northern Readers



1. Reader Type = MAG w/WIEGAND OUTPUT2. Keypad = NO KEYPAD3. LED Mode = 1-WIRE LED CONTROL


Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

Purple

Green

Red

Black/Orange/Yellow

Shield to Drain Ground

Cable Pinout:

Red 5-12VDCBlack GroundPurple Data 1Green Data 0Brown LEDOrange ASCII SelectYellow BCD Select

162 — revision 6


27. Schlage Keypads

27.1. Schlage SERIII-W Scramble Keypad

The reader operates at +8 to +12 VDC unregulated. The average current draw is 100 mA (TYP) 180 mA (MAX) with display OFF and 280 mA (TYP) 350 mA (MAX) with display ON.

27.1.1 Set the Mode Dials

`

12

543

0E F

8

D

B69

C

A7

`

12

543

0E F

8

D

B69

C

A7

`

12

543

0E F

8

D

B69

C

A7

Mode Dials in Rear Panel

(Located Behind Rubber Blanking Plug)

Facility Code (Modes 1-6 only, set to 0,0 for modes 7-A)

Operating Mode(See Card Formats)

IMPORTANT: The Facility Code and Operating Mode must be set PRIOR to the installation of the reader.

To Set Facility CodeEach switch is numbered 0 to F, allowing 256 different facility codes to be selected (00 to FF). The switch on the left sets the most-significant digit of the Facility Code, the switch on the right sets the least-significant digit of the code. Disconnect power from the unit when altering the setting of these switches.

revision 6 — 163

Schlage Keypads

27.1.2 Card Formats

Code Lengths







• Mode 6 Supports 5 digits with a transmitted block length of 26 bits with even/odd parity.

Model series

Mode Total number of bits on card

Facility codeStarting bit/Number of bits

Card numberStarting bit/Number of bits

Issue codeStarting bit/Number of bits

Number of even parity bits

Number of odd parity bits

Special

II or III 0 40 1 / 8 9 / 30 0 / 0 20 20 None

II or III 1 34 1 / 8 17 / 16 0 / 0 0 0 None

II or III 2 26 1 / 8 9 / 16 0 / 0 0 0 None

II or III 3 26 1 / 8 9 / 16 0 / 0 13 13 None

II or III 4 34 1 / 8 17 / 16 0 / 0 0 0 None

II or III 5 26 1 / 8 9 / 16 0 / 0 0 0 None

II or III 6 26 1 / 8 9 / 16 0 / 0 13 13 None



III only 9 4-bit keypad emulation, 0-9 plus # and * codes transmitted

III only A 8-bit keypad emulation, 0-9 plus # and * codes transmitted

164 — revision 6





DATA/D0

VO (No Connection)

LED

BZR

CLK/D1

GND


12

34

56

78

Connector Pin Block

Pin 2

Pin 8

Pin 4

Pin 5

Pin 7

Pin 38-12VDC Power

Supply-+

revision 6 — 165

Schlage Keypads


DATA/D0

LED

BZR

CLK/D1

GND


12

34

56

78

Connector Pin Block

Pin 7

Pin 5

Pin 8

Pin 4

IMPORTANT! This reader cannot be powered from the Dual Reader Interface Module. There must be a common ground between the Power Supply and the Dual Reader Interface Module.

Pin 2 8-12VDC Power Supply

-+Pin 3

VO (No Connection)



166 — revision 6


27.1.5 LED Operation


Card and PIN N/A Blinking red at bottom of keypad

Card only N/A Blinking red at bottom of keypad

Card or PIN Blinking red and [*] key on keypad solid


Cipher lock emulation Blinking red and [*] key on keypad solid


Facility code mode N/A

* This mode is unsupported. Any entry within the Code Length will let someone gain access because the facility code is set in the reader.


Locked Solid red at bottom of keypad Solid red at bottom of keypad

Unlocked Solid yellow at bottom of keypad Solid yellow at bottom of keypad

Power up condition Blinking red at bottom of keypad. Keypad will display firmware version and operating mode.

Keypad will display firmware version and operating mode

Access granted Blinking yellow at bottom of keypad Blinking yellow at bottom of keypad

Access denied Solid red at bottom of keypad Solid red

Waiting for PIN Blinking red and [*] key on keypad solid

Blinking red and yellow, * key on keypad solid

Waiting for second card Blinking yellow at bottom of keypad

* This mode is unsupported because there are times when a second entry creates an invalid card format.

Alternating red and yellow at bottom of keypad

Reader LED software setup

2-wire LED control 2-wire LED control

Reader type Wiegand/Prox Wiegand/Prox

Keypad 4-bit output keypad 8-bit output keypad

+ 12 V Pin 3 Pin 3

DAT 0 Pin 7 Pin 7

DAT 1 Pin 5 pin 5

LED Pin 4 Pin 4

BZR Pin 8 Pin 8

GND Pin 2 Pin 2

revision 6 — 167

Schlage Keypads

• The star [*] key must be pressed prior to PIN entry.

• The star [*] key always illuminated red.

• Upper left LED blinks with each key press.

• Pressing the [*] key will activate keypad, rescramble keys, and transmit the * key code to the OnGuard system.

• Keypad commands sometimes are not accepted, likely because of the multiple functions of the star [*] key. Pressing the star [*] key twice before commands may help.

27.1.6 Troubleshooting

When using the Schlage SERIII-W Scramble Keypad reader, you may experience any or all of the following issues:

• PIN codes do not work.

• Access granted events are not displayed in Alarm Monitoring.

• Access is denied even when a valid PIN was entered at the reader.

• PIN only request events may be displayed in Alarm Monitoring.

• Invalid card format events may be displayed in Alarm Monitoring.

• No events appear at all in Alarm Monitoring during keypad input.

To resolve these issues, verify the following settings:

1. On the reader, set both Facility Code mode dials to zero (0).

2. On the reader, set the Operating Mode dial to A.

3. In the Readers folder, select the entry for the Schlage SERIII-W Scramble Keypad from the listing window.

4. On the Reader tab, verify that the Type field is set to Wiegand/Prox.

5. Verify that the Keypad drop-down is set to Eight Bit Output Keypads.

6. On the Settings tab, verify that the LED Mode drop-down is set to 2-Wire LED Control.

7. Connect the reader's buzzer (BZR) wire into the voltage (VO) terminal of the reader port on the reader interface module.

Earth ground Case ground Not connected, or connect to Pin 2 (avoid ground loops)


168 — revision 6


28. Secura Key Readers

28.1. e-Tag Prox Reader #ASSY 2014040

This demonstrates the default wiring configuration for the reader. However, there is no control for the LED's or the buzzer. There is no way to tell what state the reader is in from the door. The reader will only flash a green light and beep once when a card is read. There are no other indications of the readers state.


e*TagTM

Secura Key

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Keypad = No Keypad3. LED Mode = 1-wire LED Control

Secura Key (eTag) Prox Reader(ASSY 2014040)

Orange

Violet

White

Green

Red

Black

VO

LED

BZR

CLK/D1

DATA/D0

GND


revision 6 — 169

Secura Key Readers


e*TagTM

Secura Key

Reade

r 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Orange

Violet

White

Green

Red

Black


Secura Key (eTag) Prox Reader (ASSY 2014040)

TYPICAL SOFTWARE SETTINGS1. Reader Type = Wiegand/Prox2. Keypad = No Keypad3. LED Mode = 1-wire LED Control

170 — revision 6


28.2. Touch Card Reader (TC-100)

This reader operates between 9 and 24 VDC. The reader has a current draw of 125 mA to 135 mA, therefore it must be connected to an alternate power supply. The reader outputs a standard Wiegand format and uses the standard single wire LED control. Follow the diagram below for the correct wiring procedure.


ACCESSSPECIALTIES TC-100


12 VDC+

Alternate Power Supply

_

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

White

Green

Red

Black

(Not Used)



revision 6 — 171

Secura Key Readers


ACCESSSPECIALTIES TC-100

Re

ad

er 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

White

Green

Black

(Not Used)


Red

_12 VDC+

Alternate Power Supply



172 — revision 6


28.3. Touch Card SK-028W Barium Ferrite Reader

This reader operates at 6-24 VDC.


Brown

White

Green

Red

Black


DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to Earth Ground

LED States

Normal - Red blinking , bright /lightLocked - Red solidUnlocked - Light off


1. Reader Type = WIEGAND/PROX2. Keypad = No Keypad 3. LED Mode = 1-WIRE LED CONTROL

revision 6 — 173

Secura Key Readers



Re

ader 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Brown

White

Green

Red

Black

Tie to Earth Ground

LED States

Normal - Red blinking, bright /lightLocked - Red solidUnlocked - Light off

TYPICAL SOFTWARE SETTINGS1. Reader Type = WIEGAND/PROX2. Keypad = No Keypad3. LED Mode = 1-WIRE LED CONTROL

174 — revision 6


29. Suprema Readers

29.1 BioEntry W OSDP Reader

The Suprema BioEntry W model is supported as an OSDP reader.

29.1.1 Wiring the BioEntry W for OSDP

Use the following diagram to wire a (LNL-4420/3300/2220/2210) controller and BioEntry W readers for OSDP.

In order to connect a BioEntry W device using OSDP, locate the three (3) wires shown here on the back of the device, and then connect to the controller:

1. Blue (with a white stripe) = TRX+ or DAT

2. Yellow (with a white stripe) = TRX- or CLK

3. Black (with a white stripe) = GND

GROUND

revision 6 — 175

Suprema Readers

176 — revision 6


30. Synergistics Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Synergistics readers.

30.1. SR1054FL Swipe Card Reader

This reader operates at 30 mA at 5 VDC.



Tie to Earth Ground


1. Reader Type = Mag w /Wiegand output2. Keypad = No Keypad 3. LED Mode = 1 WIRE LED CONTROL

Re

ader

/Driv

er B

oard

DATA/D0

VO

LED

BZR

CLK/D1

GND

5VDC Power Supply+

-

Green from LED

White from LED

revision 6 — 177

Synergistics Readers


Note: For the SL1054FL reader to be powered from the dual reader interface module, J4 must be set to (IN) 5 V and J2 must be set to regulated.


Tie to Earth

Ground


1. Reader Type = Mag w /Wiegand output2. Keypad = No Keypad

3. LED Mode = 1 WIRE LED CONTROL

Reader /Driver Board

DATA/D0

VO

LED

BZR

CLK/D1

GND

Green from LED

White from LED

178 — revision 6


30.2. SR1058SLE Swipe Card Reader

This reader operates at 30 mA at 5 VDC.



Tie to Earth Ground

DATA/D0

VO

LED

BZR

CLK/D1

GND

SWIPE CARD RAPIDLY

MAGNETIC STRIPE DOWN

5 Pin Connector to Control Board

5VDC Power Supply

+

-

(Green)

(White)

(Brown)

(Red)

(Orange)

ReaderWire Color

BrownRedOrangeWhiteGreenBlue

Reader InterfaceAssociation

Clk/D1Dat/D0

GNDLEDBZR

VO


1. Reader Type = ALL OTHER READERS2. Keypad = No Keypad 3. LED Mode = 1 or 2-WIRE LED CONTROL

revision 6 — 179

Synergistics Readers



Rea

der 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Tie to Earth Ground

SWIPE CARD RAPIDLY

MAGNETIC STRIPE DOWN

5 Pin Connector to Control Board

(Blue)

(White)

(Green)

(Brown)

(Red)

(Orange)

NOTE: For the SR 1058SLE to be powered from the Dual Reader Interface Module , J4 must be set to (IN) 5V and J2 must be set to Regulated


1. Reader Type = ALL OTHER READERS2. Keypad = No Keypad 3. LED Mode = 1 or 2-WIRE LED CONTROL

ReaderWire Color

BrownRedOrangeWhiteGreenBlue

Reader InterfaceAssociation

Clk/D1Dat/D0

GNDLEDBZR

VO

180 — revision 6


31. Texas Instruments Readers

Use the following diagrams to wire Single/Dual Reader Interface Modules and Texas Instruments readers.

31.1. TI S6410 Wall Plate/S6420 Mullion Reader

This reader operates at 9-12 VDC. The average current draw is 50 mA Typical (normal), 130 mA Typical (badge read).


Orange

Brown

White

Green

Red

Black


DATA/D0

VO

LED

BZR

CLK/D1

GND

Tie to Earth Ground



revision 6 — 181

Texas Instruments Readers



Rea

der 1

VO

LED

BZR

CLK/D1

DATA/D0

GND

Orange

Brown

White

Green

Red

Black

Tie to Earth Ground



182 — revision 6


32. XceedID Readers

Use the following diagrams to wire (single wire LED control) Single/Dual Reader Interface Modules and XceedID readers.

Note: For OSDP Protocol support, refer to XceedID Reader Wiring to Support OSDP Protocol on page 194.

32.1. XceedID ISO-X Reader

The XceedID ISO-X reader model XF1100 operates at 6-16 VDC with an average current draw of 95mA. Model XF2100 operates at 8-16 VDC with an average current draw of 95mA. Model XF2110 operates at 8-16 VDC with an average current draw of 120 mA.

revision 6 — 183

XceedID Readers

184 — revision 6




VO

LEDBZR

CLK/D1DATA/D0

GND

Tie to Earth Ground

1k,1%

Tamper Input

Red

Orange

Brown

WhiteGreen

Black

Drain Tan

Wiring From Reader


1. Reader Type = WIEGAND/PROX2. Keypad = No Keypad/8-bit Output Keypad on XF 2110 Only 3. LED Mode = 2-WIRE LED CONTROL

revision 6 — 185

XceedID Readers



Re

ade

r 1

VO

LEDBZR

CLK/D1

DATA/D0

GND

Tie to Earth Ground

1k,1%

Tamper Input

Red

OrangeBrown

White

Green

Black

Drain Tan

Wiring From Reader


1. Reader Type = WIEGAND/PROX2. Keypad = No Keypad/8-bit Output Keypad on XF 2110 Only 3. LED Mode = 2-WIRE LED CONTROL

186 — revision 6


32.2 XceedID aptiQ PR10/SM10/MT11/MT15/MTK15

PR10/SM10/MT11/MT15/MTK15 Power Specifications




PR10 5 to 16 VDC 65 mA average,110 mA peak

SM10 5 to 16 VDC 95 mA average,195 mA peak

MT11 5 to 16 VDC 100 mA average,135 mA peak

MT15 5 to 16 VDC 120 mA average,200 mA peak

MTK15 5 to 16 VDC 120 mA average,230 mA peak

From LNL-1300 To XceedID aptiQ PR10/SM10/MT11/MT15/MTK15 Reader


Reader Terminal

Pin Wire Description • Reader Type = Wiegand/Prox


TB4

GND Black Ground

BZR Brown Red LED





revision 6 — 187

XceedID Readers





From LNL-1320 To XceedID aptiQ PR10/SM10/MT11/MT15/MTK15 Reader


Reader 1 or Reader 2 Pin Wire Description • Reader Type = Wiegand/Prox


GND Black Ground



BZR Brown Red LED



From LNL-1300-U To XceedID aptiQ PR10/SM10/MT11/MT15/MTK15 Reader


Reader Terminals



J10

GND Black Ground



J13


LED2 Brown Red LED



188 — revision 6




From LNL-1320-U To XceedID aptiQ PR10/SM10/MT11/MT15/MTK15 Reader


Reader Terminals



J10

GND Black Ground



J13


LED2 Brown Red LED



revision 6 — 189

XceedID Readers

32.3 XceedID XF1050-K

XF1050-K Reader Power Specifications






XF1050-K 5 to 16 VDC 110 mA average,160 mA peak

From LNL-1300 To XceedID XF1050-K Reader Typical Software Settings

Reader Terminal



TB4

GND Black Ground

BZR Brown Red LED





From LNL-1320 To XceedID XF1050-K Reader Typical Software Settings



GND Black Ground



BZR Brown Red LED



190 — revision 6






From LNL-1300-U To XceedID XF1050-K Reader Typical Software Settings

Reader Terminals



J10

GND Black Ground



J13


LED2 Brown Red LED

BZR Blue Buzzer Input


From LNL-1320-U To XceedID XF1050-K Reader Typical Software Settings

Reader Terminals



J10

GND Black Ground



J13


LED2 Brown Red LED



revision 6 — 191

XceedID Readers

32.4 XceedID XF1500

XF1500 Reader Power Specifications






XF1550 5 to 16 VDC 110 mA average,160 mA peak

From LNL-1300 To XceedID XF1500 Reader Typical Software Settings

Reader Terminal



TB4

GND Black Ground

BZR Brown Red LED





From LNL-1320 To XceedID XF1500 Reader Typical Software Settings



GND Black Ground



BZR Brown Red LED



192 — revision 6






From LNL-1300-U To XceedID XF1500 Reader Typical Software Settings

Reader Terminals



J10

GND Black Ground



J13


LED2 Brown Red LED



From LNL-1300-U To XceedID XF1500 Reader Typical Software Settings

Reader Terminals



J10

GND Black Ground



J13


LED2 Brown Red LED



revision 6 — 193

XceedID Readers

32.5. XceedID Reader Wiring to Support OSDP Protocol

The following table describes how to wire door interface modules to XceedID readers for OSDP protocol support.

Note: For OSDP protocol support, set DIP switch 3 on the reader to ON. All other DIP switch positions should be OFF.

From Interface Module To XceedID Reader Typical Software Settings

Pin Wire Description • Reader Type = Single/Dual Interface (OSDP Protocol)

GND Black Signal Ground

DAT D0 Tan TR-

CLK D1 Pink TR+

BZR Not connected

LED Not connected

V0 Red Power

194 — revision 6


Index

A

Access readers....................................................... 9AIT reader #L-TR200......................................... 11AWID

LR-2200....................................................... 26prox with keypad (kp-6840) ................. 20, 26readers.......................................................... 15sentinel prox mr-1824.................................. 15sentinel-prox (LR-911) ................................ 24sentinel-prox sp-6820, sr-2400, mm-6800... 17

B

BAI barcode readers ........................................... 29Banque-tec smart card readers ............................ 31Baran tec

everswitch .................................................... 36keypads ........................................................ 33LNL826S121NN.......................................... 33

Barium ferrite reader......................................... 173Bewator readers .................................................. 39bioClASS readers.............................................. 108

C

Cascade readers................................................. 133Casi-rusco

94x, 97x ....................................................... 41configuration................................................ 46readers.......................................................... 41

CEIAfreedom reader with keypad (prox) ............. 49output protocol clock/data ........................... 50readers.......................................................... 49

Checkpoint systemsmirage ii ....................................................... 53mirage proximity reader b ........................... 57readers.......................................................... 53SN-MSC 16147 ........................................... 55

Cross match......................................................... 65

D

Deister electronics smart card reader.................. 69Dorado

611 ............................................................... 77644 ............................................................... 73780 ............................................................... 75combination readers,230/240....................... 79elevator reader,570 ...................................... 77readers.......................................................... 73

E

EPIC swipe readers ............................................. 91Essex

#KTP-16212SLI .......................................... 81#KTP-163SN ............................................... 83keypads ........................................................ 81

e-Tag ................................................................. 169Everswitch proximity reader plus keypad .......... 36

H

HIDbioclass ...................................................... 108classic readers .............................................. 91iclass reader ................................................. 97iclass reader/encoder.................................... 95lcd .............................................................. 108maxiprox 5370 A-1...................................... 87maxiprox 5370/5375AGN00 ....................... 88mifare 6055................................................ 106mifare 6075................................................ 109osdp............................................................ 111proxpoint...................................................... 92proxpro......................................................... 85proxpro ii ..................................................... 93readers.......................................................... 85sensorkey ................................................... 104

Hughes miniprox reader...................................... 89

I

iClassreader ........................................................... 97reader/encoder ............................................. 95

ID solutions8030/8035 bar code reader ........................ 125readers........................................................ 125

IDH max readers ............................................... 121Indala

ARK-501 ................................................... 149ASR-103,ASR-105,ASR-120,ASR-122,ASR-

124,ASR-136...................................... 145ASR-120,ASR-122 .................................... 141ASR-500,ASR-501,ASR-503,ASR-505,ASR-

110 ...................................................... 151ASR-503,ASR-505,ASR-110,ASR-112.... 143EM4525F ................................................... 154readers........................................................ 141

InfographicsOTD-60...................................................... 127readers........................................................ 127

revision 6 — 195

Index

Integrated engineeringdesfire ........................................................ 131PX007Z/MFSNR mifare reader................. 129readers........................................................ 129

Iolan reader LA-XXW-PRXKY-MX 1050-4021-092 ............................................................. 139

K

Keri systemscascade,sierra ............................................. 133readers........................................................ 133

Keypads .............................................................. 33

L

LCD readers ...................................................... 108LNL826S121NN 8-bit output keypad reader ..... 33

M

Maxiprox 5370 A-1 ............................................ 87Maxiprox 5370/5375AGN00.............................. 88Mifare

6055 ........................................................... 106iolan reader ................................................ 139LA-WIW-PROXKEY-M........................... 137readers........................................................ 137

Miragemirage ii ....................................................... 53proximity reader b........................................ 57

Motorolabistatix prox reader (BXR-610) ................. 153flexpass ...................................................... 155indala.......................................................... 141

ARK-501 ............................................ 149ASR-103,ASR-105,ASR-120,ASR-

122,ASR-124,ASR-136............... 145ASR-120,ASR-122............................. 141ASR-500,ASR-501,ASR-503,ASR-

505,ASR-110............................... 151ASR-503,ASR-505,ASR-110,ASR-112....

143EM4525F............................................ 154

N

Nedapreaders........................................................ 157transit reader .............................................. 157

NorthernBR-7........................................................... 161readers........................................................ 161

P

Pinpad wiegand readers ...................................... 91

Proxpoint reader.................................................. 92Proxpro................................................................ 85Proxpro ii ............................................................ 93

S

Secura key(e-tag) prox reader #ASSY 2014040 ......... 169readers........................................................ 169touch card reader (TC-100) ....................... 171touch card SK-028W barium ferrite reader 173

Sensorkey.......................................................... 104Sierra readers .................................................... 133Smart card reader

#PRM 5M,PRX 5 HSF ................................ 69model BT815 ............................................... 31model BT900/818 ........................................ 31

SupremaBioEntry model W..................................... 175osdp............................................................ 175

Synergisticsreaders........................................................ 177SR1054FL.................................................. 177SR1058SLE ............................................... 179

T

Texas instrumentsreaders........................................................ 181S6410,S6420.............................................. 181

Toch card reader (TC-100) ............................... 171Touch card SK-028W ....................................... 173

U

UL evaluated readers .......................................... 11

X

XCeedIDreaders........................................................ 183

XceedIDiso-x reader xf1100,xf2100,xf2110 ........... 183

196 — revision 6


revision 6 — 197

UTC Fire & Security Americas Corporation, Inc.1212 Pittsford-Victor RoadPittsford, New York 14534 USATel 866.788.5095 Fax [email protected]

alternative reader wiring guide -...

Documents