alloy steels
TRANSCRIPT
![Page 1: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/1.jpg)
05/01/2023 1
![Page 2: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/2.jpg)
Alloy Steel - Introduction,
05/01/2023 2
Alloying Changing chemical composition of steel by adding elements with purpose to improve its properties as compared to the plane Carbon steel.
Alloy Steels are irons where other elements (besides carbon) can be added to iron to improve:
Mechanical property - Increase strength, hardness, toughness (a given strength & hardness),
creep, and high temp resistance.Increase wear resistance, Environmental property [Eg: corrosion].
![Page 3: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/3.jpg)
05/01/2023 3
Classification of metal alloys
Ferrous Non - ferrous
Cast Iron Steels
Low Alloy High Alloy
Low Carbon Med.
Carbon
HighCarbon Stainless
Steel
Tool Steel
White
Grey
![Page 4: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/4.jpg)
Classification of alloy steel
05/01/2023 4
![Page 5: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/5.jpg)
Classification of alloy steelAlloy steels grouped into low, medium and high alloy steels.High-alloy steels would be the stainless steel
groups.Most alloy steels in use fall under the category of
low alloy
Alloy steels are, in general, with elements as: > 1.65%Mn, > 0.60% Si, or >0.60% Cu.
The most common alloy elements includes: Chromium, nickel, molybdenum, vanadium, tungsten, cobalt, boron, and copper
05/01/2023 5
![Page 6: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/6.jpg)
Low Alloys: Low Carbon
05/01/2023 6
• Composition:• less than ~ 0,25% C ( 0,30%)
• Microstructure: • ferrite and pearlite
• Properties: • relatively soft and weak, but possess high ductility and
toughness• Other features: machinable and weldable, not responsive to
heat treatment - Plain carbon steelsApplications: auto-body components, structural shapes, sheets etc.• High-strength low alloy (HSLA) steels:
• up to 10 wt% of alloying elements, such as Mn, Cr, Cu, V, Ni, Mo – can be strengthened by heat-treatment
![Page 7: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/7.jpg)
Low Alloys: Medium Carbon Steels Composition:
0.25< C <0.6 C wt.%Microstructure:
typically tempered martensiteProcessing: Increasing the carbon content to
approximately 0.5% with an accompanying increase in manganese allows medium carbon steels to be used in the quenched and tempered condition.
Properties: stronger than low-carbon steels, but in expense of ductility and toughness
Applications: couplings, forgings, gears, crankshafts other high-strength structural components. Steels in the 0.40 to 0.60% C range are also used for rails, railway wheels and rail axles.
05/01/2023 7
![Page 8: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/8.jpg)
Low Alloys: High&Ultra High - Carbon Steels• High-carbon steels 0.60 to 1.00 % C with manganese contents
ranging from 0.30 to 0.90%.
Application: High-carbon steels are used for spring materials, high-strength wires, cutting tools and etc.
Ultrahigh-carbon steels are experimental alloys containing 1.25 to 2.0% C. These steels are thermo-mechanically processed to produce microstructures that consist of ultra-fine, equiaxed grains of spherical, discontinuous proeutectoid carbide particles.
05/01/2023 8
![Page 9: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/9.jpg)
High-Alloy Steels: Stainless Steels (SS) The primarily-alloying element is Cr (≥11 wt.%) Highly resistance to corrosion;
Nickel and molybdenum additions INCREASE corrosion resistance
A property of great importance is the ability of alloying elements to promote the formation of a certain phase or to stabilize it.
These elements are grouped as four major classes:
1. austenite-forming, 2. ferrite-forming, 3. carbide-forming and
05/01/2023 9
![Page 10: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/10.jpg)
Distribution of alloying elements in steels. Alloying elements can influence the equilibrium
diagram in two ways in ternary systems Fe-C-X. 1. Expanding the γ -field, and encouraging the
formation of austenite over wider compositional limits. These elements are called γ -stabilizers.
2. Contracting the γ-field, and encouraging the formation of ferrite over wider compositional limits. These elements are called α-stabilizers.
05/01/2023 10
![Page 11: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/11.jpg)
05/01/2023 11
Phase change- SS
![Page 12: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/12.jpg)
05/01/2023 12
Classification of iron alloy phase diagrams: a. open γ -field; b. expanded γ -field;
![Page 13: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/13.jpg)
05/01/2023 13
Classification of iron alloy phase diagrams: c. closed γ -field d. Contract γ - field
![Page 14: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/14.jpg)
05/01/2023 14
Nickel and manganese depress the phase transformation from γ to α to lower temperatures
both Ac1 and Ac3 are lowered.
It is also easier to obtain metastable austenite by quenching from the γ-region to room temperature
A. Open - field: austenitic steels.
![Page 15: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/15.jpg)
B. Expanded -field : austenitic steelsCarbon and nitrogen (Copper, zinc and gold)The γ-phase field is expanded Heat treatment of steels, allowing formation of a
homogeneous solid solution (austenite) containing up to 2.0 wt % of carbon or 2.8 wt % of nitrogen
05/01/2023 15
![Page 16: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/16.jpg)
C. Closed -field : ferritic steelsSilicon, aluminium, beryllium and phosphorus (strong carbide forming elements - titanium, vanadium, molybdenum and chromium )
γ-area contract to a small area referred to as the gamma loop encouraging the formation of
BCC iron (ferrite),
Not amenable to the normal heat treatments involving cooling through the γ/α-phase transformation
16
![Page 17: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/17.jpg)
D. Contracted -field : ferritic steels Boron is the most significant element of
this group (carbide forming elements - tantalum, niobium and zirconium.
The γ-loop is strongly contracted
Normally elements with opposing tendencies will cancel each other out at the appropriate combinations, but in some cases irregularity occur. For example, chromium added to nickel in a steel in concentrations around 18% helps to stabilize the γ-phase, as shown by 18Cr8Ni austenitic steels.
05/01/2023 17
![Page 18: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/18.jpg)
18Cr8Ni austenitic steels.
05/01/2023 18
opposing tendencies
![Page 19: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/19.jpg)
High-Alloy Steels: Stainless Steels (SS)(a) The austenitic SS:
• -Fe FCC microstructure at room temperature. Typical alloy Fe-18Cr-8Ni-1Mn-0.1C
• Stabilizing austenite – increasing the temperature range, in which austenite exists.
• Raise the A4 point (the temperature of formation of austenite from liquid phase) and decrease the A3 temperature.
05/01/2023 19
![Page 20: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/20.jpg)
Fe-Ni equilibrium diagram
05/01/2023 20
A4 increase
A3 Decrease
![Page 21: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/21.jpg)
High-Alloy Steels: Stainless Steels (SS)• Austenite-forming elements
The elements Cu, Ni, Co and Mn Disadvantage: work harden rapidly so more difficult
to shape and machineAdvantages of ALL fcc metals and alloys
toughness; ductility; creep resistance
05/01/2023 21
![Page 22: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/22.jpg)
High-Alloy Steels: Stainless Steels (SS)(b) The ferritic SS:
α−Fe BCC structure. Not so corrosion resistant as austenitic SS, but
less expensive magnetic steel; An alloy Fe-15Cr-0.6C, used in quench and tempered conditionUsed for: rust-free ball bearings, scalpels, knives
05/01/2023 22
![Page 23: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/23.jpg)
Cr-Fe equilibrium diagram
05/01/2023 23
Lower A4Increase the A3
![Page 24: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/24.jpg)
High-Alloy Steels: Stainless Steels (SS)lower the A4 point and increase the A3 temperature. Ferrite-forming elementsThe most important elements in this group are Cr,
Si, Mo, W, V and Al.
05/01/2023 24
![Page 25: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/25.jpg)
High-Alloy Steels: Stainless Steels (SS)(c) The martensitic SS this fine magnetic bcc structure is
produced by rapid quenching and possesses high yield strength and low ductility. Applications: springs.
(d) The precipitation hardening SS – producing multiple microstructure form a single-phase one, leads to the increasing resistance for the dislocation motion. (a) and (b) are hardening and strengthening by cold work
Microstructure - martensitic, ferritic or austenitic based on microstructure, and precipitation hardening based on strengthening mechanism
05/01/2023 25
![Page 26: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/26.jpg)
High-Alloy Steels: Tools steels• Wear Resistant, High Strength and Tough BUT low
ductilityHigh Carbon steels modified by alloy additions
AISI-SAE ClassificationLetter & Number Identification
ClassificationLetters pertain to significant characteristic
W,O,A,D,S,T,M,H,P,L,F – E.g. A is Air-Hardening medium alloyNumbers pertain to material type 1 thru 7 (E.g. 2 is Cold-work )
05/01/2023 26
![Page 27: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/27.jpg)
High-Alloy Steels: Tools steelsProvide the necessary hardness with simpler
heat-treatment and retain this hardness at high temperature.
The primary alloying elements are: Mo, W and Cr
Examples:
I.HSS – Turning machine toolsII.High carbon tool steels – Drill
bits/Milling tools/punches/saw blade
05/01/2023 27
![Page 28: Alloy steels](https://reader031.vdocuments.mx/reader031/viewer/2022012402/588a53bc1a28abd3088b7415/html5/thumbnails/28.jpg)
THANK YOU
05/01/2023 28