PLASTIC REPAIR SYSTEM

VIRTUS PRS is a structural adhesive designed and developed for the highest standard.

VIRTUS PRS 2K Poliurethanes are used by the most of the OEM all trough the world. Know of its strength and constant quality.

PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICA©2004 by Allchem Srl Via Azzano, 32/C 24050 GRASSOBBIO BG ITALYTel. +39-035-525616 • Fax +39-035-526199 • www.allchem.it • info@allchem.it

SEA

LIN

G S

YS

TEM

SEALING SYSTEM

PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICA©2004 by Allchem Srl Via Azzano, 32/C 24050 GRASSOBBIO BG ITALYTel. +39-035-525616 • Fax +39-035-526199 • www.allchem.it • info@allchem.it

PLASTIC REPAIR SYSTEM

Complete system for professional repair of bumpers and plastic parts

Applications:• Cars: bumper, masks, spoiler, interior trim, doors, lights media• vehicles: bumper, masks, air intakes, wheel covers• Motorcycles: All the covers

Features:Two-component polyurethane adhesive

Advantages:• the adhesive is providing high adhesion to both rigid and flex-

ible plastics• perfectly painted over• maintains its properties under various climatic conditions• Curing time: 6 hours at 20 ° C or 15 min. 60 ° C with an infra-

red lamp or Cardridges• Two years stock life (18-23°C)

Polyurethane adhesive “four choices”Advantages:Polyurethane adhesive normal (3,5 or 5 min.)• allows work with an open time of 3,5 - 5 minutes, you can

repair any cracks and bumpers• cracks, scratches and small holes.• I buy almost completely repaired bumper• their original strength

Polyurethane adhesive for rapid repair (25 or 90 sec.)• allows rapid intervention in curing, repair of small details, eg.:

Slots projectors, plastic stands and molletteria inner door and interior trim.

• In these cases, apply the bonding only a part of the break.

Aerosol plastic primerAdvantages:• to be used before the polyurethane adhesive to prepare the

surface and improve adhesion• wait and leave for 10 to 15 minutes, until complete evaporation

of the solvent

Aerosol restructurantAdvantages:• embossing paint to recreate the original quickly and easily on

bumper unpainted• painted over. Do not apply thick coats, drying completely after

15 to 20 min.

PAINTING FOR THE FOLLOW CAREFULLY PROCEDURES RECOMMENDED BY VEHICLE MANUFACTURERS.

PLASTIC REPAIR SYSTEM

COMPLETE SYSTEM FOR PROFESSIONAL REPAIR OF BUMPERS AND PLASTIC PARTS

HQHIGH QUALITY

SLLLONG LIFE STOCK

FCFAST CURING

MCMEDIUM CURING

SCSLOW CURING

SEALING SYSTEMPLASTIC REPAIR SYSTEM

FULL RANGE

PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICA©2004 by Allchem Srl Via Azzano, 32/C 24050 GRASSOBBIO BG ITALYTel. +39-035-525616 • Fax +39-035-526199 • www.allchem.it • info@allchem.it

PRIVATE LABELS WELCOMEWe can make for private labels all different kind of Kits with customer request content.

SEALING SYSTEM

PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICA©2004 by Allchem Srl Via Azzano, 32/C 24050 GRASSOBBIO BG ITALYTel. +39-035-525616 • Fax +39-035-526199 • www.allchem.it • info@allchem.it

Code Size Description Stock Life Speed Type Colour MOQ U.M. Pcs

BoxEuro

676.0002.00 COMPLETE KIT with 699 Epomix manual dispenser Kit Blue box - Pcs 1 00,00

676.0001.00 COMPLETE KIT with 699 Adaptor (for use with silicone caulking gun) Kit Blue box - Pcs 1 00,00

670.0050.06 50 ml 670 EPOXY ADHESIVE SEALANT for general uses 1Y 7’ minutes EPOXY Transparent - Pcs 6 00,00

671.0050.06 50 ml 671 POL - ADHESIVE SEALANT for plastic repair 1Y 7’ minutes PU Grey - Pcs 6 00,00

671.0300.06 50 ml 671 POL - 1Y ADHESIVE SEALANT for plastic parts 1Y 5’ minutes PU Black - Pcs 6 00,00

672.0210.06 50 ml 672 POL - 1Y ADHESIVE SEALANT for plastic parts 1Y 3,5’ minutes PU Black - Pcs 6 00,00

672.0090.06 50 ml 672 POL - 1Y ADHESIVE SEALANT for plastic parts 1Y 90” seconds PU Black - Pcs 6 00,00

672.0025.06 50 ml 672 POL - 1Y ADHESIVE SEALANT for plastic parts 1Y 25” seconds PU Black - Pcs 6 00,00

671.1300.06 50 ml 671 POL - 2Y ADHESIVE SEALANT for plastic parts - Only by request 2Y 5’ minutes PU Black 480 Pcs 6 00,00

672.1210.06 50 ml 672 POL - 2Y ADHESIVE SEALANT for plastic parts - Only by request 2Y 3,5’ minutes PU Black 480 Pcs 6 00,00

672.1090.06 50 ml 672 POL - 2Y ADHESIVE SEALANT for plastic parts - Only by request 2Y 90” seconds PU Black 480 Pcs 6 00,00

672.1025.06 50 ml 672 POL - 2Y ADHESIVE SEALANT for plastic parts - Only by request 2Y 25” seconds PU Black 480 Pcs 6 00,00

674.0200.01 200 ml 674 SPRAY PLASTIC PRIMER aerosol Transparent Pcs 6 00,00

675.0050.50 675 SHORT MIXER for POL 671-672 - New model for save quantity Tansparent / Blue Pcs 50 00,00

673.0002.00 1 m 673 Joint tape with film Transparent Pcs 1 00,00

623.0000.30 623 Applicator brush (Pennello) Orange Pcs 1 00,00

677.0100.40 400 ml 677 SPRAY CLEANER for plastic parts Aerosol Transparent Pcs 12 00,00

677.0202.40 400 ml 677 SPRAY FILLER for plastic parts Aerosol Grey Pcs 12 00,00

677.0203.40 400 ml 677 SPRAY PUTTY for plastic parts High Build Aerosol Grey Pcs 12 00,00

677.0200.40 400 ml 677 RESTRUCTURANT for plastic parts Aerosol Transparent Pcs 12 00,00

677.0101.40 400 ml 677 PLASTIC PAINT Aerosol Anthracite Pcs 12 00,00

677.0102.40 400 ml 677 PLASTIC PAINT Aerosol Grey Pcs 12 00,00

677.0139.40 400 ml 677 PLASTIC PAINT Aerosol Black Pcs 12 00,00

677.0140.40 400 ml 677 PLASTIC PAINT Aerosol Light Grey Pcs 12 00,00

699.1070.00 699 ADAPTOR for use bicatridges with silicone gun Clear / Blue Pcs 1 00,00

699.0070.00 699 EPOMIX manual dispenser for bicartridges Grey / Black Pcs 1 00,00

SEALING SYSTEM

PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICA©2004 by Allchem Srl Via Azzano, 32/C 24050 GRASSOBBIO BG ITALY

DESCRIPTIONS

• VIRTUS PRS is a structural adhesive designed and developed for the highest standard. VIRTUS PRS 2K Poliurethanes are used by the most of the OEM all trough the world. Know of its strength and constant quality.

• VIRTUS PRS pioneered the field of structural adhesion and now have over 30 years of field experience.

• In 1983 VIRTUS PRS were instrumental in changing the way an Automobile could be built. Mechanical fasteners were eliminated. As the body panels were structurally bonded to the steel frame.

• VIRTUS PRS have became the world leader in structural bonding for transportation and over the years have bonded an impressive list of automobile, trucks, watercraft and other vehicles.

• In 1993 VIRTUS PRS were launched in side-by-side cartridges for the aftermarket repair industry. The industry quickly accepted the repair material as the product of choise, as repairs could now be made with OEM specificastion approved materials.

• VIRTUS PRS are reactive bonding products which are environmentally, containing no VOC’s.

• VIRTUS PRS bond most thermo set and many thermoplastic plastics. Selected metals are quite bondable, but for long term durability and integrity of the bond, a primer is recommended (or for metal bonding see VIRTUS PRS especially developed for metal bonding).

• VIRTUS PRS are selected for the unique balance of performance properties provided only from the Ure-thane polymer. Among the desirable features are high tensile strength, high impact resistance, temperature resistance up to 100°C, excellent fatigue resistance and elongation properties allowing for the bonding of dissimilar materials. Dissimilar materials have differing thermal expansion and contraction properties which are managed by PRS.accepted the repair material as the product of choise, as repairs could now be made with OEM specificastion approved materials.

BENEFITS• Meets OEM specs.

• Fastest product in the market.

• Will cure even in thin layers.

• Tixotropic so no sagging.

• Excellent gap filling properties.

• Shelf life of 1 or 2 years even in opened cartridges!!!.

• Contains no VOC’s.

• One product for all plastics.

• 5 different curing speeds.

• Low amount of Isocyanates.