all rights reserved © version 2014-1 - lift-tex.nl€¦ · lash-tex® lashing systems 25 mm wide...

User Manual LASH-TEX® Lashing Systems It’s only allowed to use undamaged lashing systems. Lashing systems may only be charged up to the maximum permissible tensile strength indicated on the label

(LC = Load Capacity). Lashing systems may never be pulled over sharp edges or raw surfaces, unless equipped with a good protection. Lashing systems has to be equally divided over the guarantors. Lashing systems must not be used as a fastener. They are not made for hoisting. Hooks should not be taxed on the points, unless it’s a hook that is made specifically for this purpose. Clamping and connection elements must not rest on corners, so that they do not to bend takes be exposed. There should be, in order to achieve a higher pre-tension force, no extra extensions to the clamping lever of the

span elements supplied by the manufacturer be made unless specifically shown from the manual that this is allowed. Ratchet buckles, the number of windings may not be less than 1 and no more than 3. After fracture or deformation of a connecting element or part of a span element, the lashing systems of which

they may no longer be used. The lashing systems and all components shall at least once a year by an expert to be checked. Depending on the application requirements and the conditions should be carried out, so that, if necessary,

intermediate visual controls always damaged lashing systems for further use. In case of cracks, particularly cross cracks or nicks, fractures or que stionable corrosion phenomena, respectively,

damage to span the relevant connection or elements should be excluded from further use straps. At a more than 5% dilation (in mouth of the hook) or distortions of a general nature, as well as in parts of

permanent deformation recognizable in that span-or connecting elements which in practice, severe as acting forces to be considered damaged and the parts to be removed. Ratchets straps should be frowned upon if there are cuts and/or breaks in the webbing. Repairs to lashing systems may only persons authorized by the manufacturer or by the manufacturer. Only those

lashing systems on the label of which the manufacturer can be repaired, the permissible tensile force and the material may be adopted. Ratchet straps should be kept in dry, moderately heated spaces, shielded from sunlight and protected from

mechanical damage. Straps should not be in the proximity of fire or at places with increased temperatures are dried or preserved. When storing straps serve the special requirements of the manufacturer regarding the influences of chemicals be

observed. When Lashing systems with chemicals come into contact, they must be neutralized immediately. Never make a tie in the lashing systems. If there is a doubt about it, always consult your supplier.

LASH-TEX® Lashing Systems 25 mm wide LASH-TEX® Lashing Systems 35 mm wide1-part, endless

Art. no. 803/1-350daN

Art. no. 906/1-800daN

Art. no. 909/1-LC 1300daN

*Available in different colors and lenghts.

2-part

Art. no. 803/1002-LC 175/350daN

Art. no. 906/1002-LC 400/800daN

Art. no. 909/1002-LC 650/1300daN


1-part, endless

Art. no. 804/1-LC800daN

Art. no. 917/1-LC2000daN

Art. no. 908/1-LC2000daN *Available in different colors and lenghts.

2-part

Art. no. 917/1002-LC1000/2000daN

Art. no. 908/1004-LC1000/2000daN

Art. no. 908/1017-LC1000/2000daN


LASH-TEX® Lashing Systems 50 mm wide LASH-TEX® Lashing Systems 75 mm wide

LASH-TEX® Ratchets and Hooks in 25 mm

1-part

Art. no. 811PP/1


2-part

Art. no. 811PP/1006

*Available in different colors of lenghts.

endless with ratchet

Art. no. 975/1

2-part with ratchet

Art. no. 975/1069

2-part with ratchet

Art. no. 975/1069

Art. no. 803

Art. no. 906i

Art. no. 803 G Art. no. 906 Art. no. 909

Art. no. 909i Art. no. 1002i Art. no. 1002i



Art. no. 1014 Art. no. 1004 Art. no. 1066 Art. no. 1210/35

Art. no. 917

Art. no. 811PP

Art. no. 910

Art. no. 1065

Art. no. 1826

Art. no. 811PPi

Art. no. 1075

Art. no. 1827

Art. no. 1004i

Art. no. ERGOPP

Art. no. 917i

Art. no. 1006i

Art. no. 1014/50

Art. no. 1207

Art. no. 1017

Art. no. 907

Art. no. 916

Art. no. 1209

Art. no. 1006


Art. no. 1075/75 Art. no. 975 Art. no. 1067 Art. no. 1069

All rights reserved © Version 2014-1

For more information about this product please contact our salesteam.

* LIFT-TEX® INDUSTRIE B.V. - Optional print on the lashings. Lettering and logo’s available on demand.

all rights reserved © version 2014-1 - lift-tex.nl€¦ · lash-tex® lashing systems 25 mm wide...

Documents