all rights reserved.info.cad-is.ru/mentor graphics for universities.pdf · in this brochure you...

1 www.mentor.com/company/higher_ed

Copyright © Mentor Graphics Corporation 2005-2017 All rights reserved.

This document contains information that is proprietary to Mentor Graphics Corporation. The original recipient of this document may duplicate this document in whole or in part for internal business purposes only, provided that this entire notice appears in all copies. In duplicating any part of this document, the recipient agrees to make every reasonable effort to prevent the unauthorized use and distribution of the proprietary information.

This document is for information and instruction purposes. Mentor Graphics reserves the right to make changes in specifications and other information contained in this publication without prior notice, and the reader should, in all cases, consult Mentor Graphics to determine whether any changes have been made. The terms and conditions governing the sale and licensing of Mentor Graphics products are set forth in written agreements between Mentor Graphics and its customers. No representation or other affirmation of fact contained in this publication shall be deemed to be a warranty or give rise to any liability of Mentor Graphics whatsoever.

MENTOR GRAPHICS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MENTOR GRAPHICS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED IN IT, EVEN IF MENTOR GRAPHICS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

U.S. GOVERNMENT LICENSE RIGHTS: The software and documentation were developed entirely at private expense and are commercial computer software and commercial computer software documentation within the meaning of the applicable acquisition regulations. Accordingly, pursuant to FAR 48 CFR 12.212 and DFARS 48 CFR 227.7202, use, duplication and disclosure by or for the U.S. Government or a U.S. Government subcontractor is subject solely to the terms and conditions set forth in the license agreement provided with the software, except for provisions which are contrary to applicable mandatory federal laws. TRADEMARKS: The trademarks, logos and service marks ("Marks") used herein are the property of Mentor Graphics Corporation or other parties. No one is permitted to use these Marks without the prior written consent of Mentor Graphics or the owner of the Mark, as applicable. The use herein of a third-party Mark is not an attempt to indicate Mentor Graphics as a source of a product, but is intended to indicate a product from, or associated with, a particular third party. A current list of Mentor Graphics’ trademarks may be viewed at: www.mentor.com/trademarks. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.

Mentor Graphics Corporation

8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777 Telephone: 503.685.7000

Toll-Free Telephone: 800.592.2210 Website: www.mentor.com

SupportNet: supportnet.mentor.com/ Send Feedback on Documentation: supportnet.mentor.com/doc_feedback_form

http://www.mentor.com/trademarks

http://www.mentor.com/

https://supportnet.mentor.com/

https://supportnet.mentor.com/user/feedback_form.cfm


INTRODUCTION Welcome to Mentor Graphics’ Higher Education Program (HEP). Mentor Graphics, a technology leader in electronic design automation (EDA) with the broadest industry portfolio of best-in-class products, founded the Higher Education Program (HEP) in 1985 to further the development of skilled engineers within the electronics industry. HEP provides schools around the globe with leading edge design tools for classroom instruction and academic research to help ensure that engineering graduates enter industry proficient in state-of-the-art tools and techniques. To date, Mentor Graphics is proud to have partnered with more than 1600 academic institutions worldwide. Mentor Graphics is widely known for its best-in-class EDA tools such as the de facto standard Calibre physical verification tools, Questa functional verification tools, VLSI Test tools, and board design tools as well as other IC EDA categories. In the early 2000’s, Mentor Graphics began a strategic move into systems and automotive tools, via acquisitions and internal development. These tools include categories such as, cabling & harness, automotive-networking, embedded systems, board design, and mechanical analysis. They span the life cycle range from design entry to simulation and modelling, in-vehicle software, plus manufacturing and industrial engineering functionality. We invite you to help your students to prepare for a career in the automotive industry by learning the same tools as major vehicle makers and suppliers use. Please review the following bundles of tools offered through HEP. You can also get more in-depth information at www.mentor.com/automotive. In this brochure you will find details on the Mentor Graphics products available through HEP. We organize our products into a series of design bundles from which you will choose based on your needs. Upon admittance to the program, you will receive licenses for all products in the bundle(s) that you choose. To apply for or renew your annual HEP membership, please visit www.mentor.com/company/higher_ed/. Thank you once again for your continued support. We hope you have a productive year as a member of Mentor Graphics Higher Education Program! Sincerely, Ian Burgess HEP Development Director Mentor Graphics

TABLE OF CONTENTS

3 HEP Product Bundles 4 IC Nanometer Design 6 8

Design, Verification & Test High Level Synthesis

9 Automotive & System Design & Analysis 10 Electrical & Wire Harness Design 11 12

Vehicle Networking Embedded Software

13 PCB Design – PADS and HyperLynx 16 Mechanical Analysis 18 Renewing Members Only 20 Support & Training 21 Contact HEP

https://www.mentor.com/products/

http://www.mentor.com/automotive

http://www.mentor.com/company/higher_ed/


HEP SOFTWARE BUNDLES For 2017, Mentor Graphics products available through HEP are divided into eight (8) design bundles. Table 1 shows these bundles and their corresponding support prices. When you order your HEP software you will select by bundle, and you will receive licenses and media for all products included in that bundle. (Support Fees are irrespective of the number of licenses you require.)

DESCRIPTION MAIN PRODUCT COMPONENTS US SUPPORT

PRICE

IC Nanometer Design Eldo®, Questa™ ADMS, Pyxis™, Calibre®, IE3D $990

Design, Verification & Test Vista™, ReqTracer™, Questa (including ModelSim®), Precision Synthesis, Leonardo Spectrum™ ASIC, Tessent™ Silicon Test, SystemVision

$990

High Level Synthesis (C Synthesis)

Catapult C University Edition, System C Input, Catapult C Library Builder

$990

Electrical & Wire Harness Design

Capital® Design, Views, Analysis and Harness; Vesys®; SystemVision

$990

Vehicle Networking Design

Volcano VNA, Volcano LNA, Volcano VSA, Volcano VSB, Virtual System Integrator, SystemVision

$990

Embedded Software Codebench Pro ARM Embedded, Virtual Codebench ARM Embedded, Vista Architect Station, Vista Virtual Prototype, Nucleus ReadyStart for ARM

$990

PCB PADS® with HyperLynx®

PADS Standard Plus, PADS AMS Design Suite, PartQuest, HyperLynx Ghz, HyperLynx Power Integrity, HyperLynx DDR, HyperLynx DC Drop, HyperLynx Full Wave Solver

$990

Mechanical Analysis FloTHERM™, FloTHERM PCB, FloTHERM PACK FloVENT™, FloEFD™, FloEFD Electronic Cooling & Adv CFD, FloMASTER®

$990

PCB Xpedition® This bundle is only available as a renewal.

PCB Board Station This bundle is only available as a renewal.

**For international pricing and product options, please contact your regional HEP representative.

https://www.mentor.com/company/higher_ed/contact


IC NANOMETER DESIGN The IC Nanometer Design bundle provides a complete environment for the design, capture, layout and verification of analog, digital and mixed-signal integrated circuits. This bundle includes all products that incorporate the IC Nanometer Design platform: The Pyxis suite of IC design tools

Schematic capture, netlisting, simulation setup and results viewing.

Physical layout

Editing, schematic-driven layout, and top-level floorplanning and routing. The Questa ADMS analog and mixed signal verification suite

Questa ADMS and Questa AMDS RF - A language-neutral, mixed-signal simulator that enables top-down design and bottom-up verification of multi-million gate analog/mixed-signal SoC designs.

Eldo and Eldo RF - An analog simulator offering numerous simulation and modeling options that deliver high-performance and high-speed simulation with the accuracy required by the user.

The Calibre product line for physical verification and design for manufacturability of deep sub-micron integrated circuits

Calibre - The industry standard platform for physical verification, offering superior performance and capacity for both flat and hierarchical algorithms.

Calibre xRC - Accurate transistor-level, gate-level and hierarchical parasitic extraction.


IC NANOMETER DESIGN TOOLS - Analog-Mixed Signal Platform Calibre Design Tools Platform

250218 Questa ADMS Core MixedHDL Bnd SW 242872 Calibre xACT 3D Ap SW

212235 Questa ADMS RF Op SW 240479 Calibre DRC Auto-Waiver Op SW

130007 Artist Link Ap SW 231096 Calibre YieldServer Ap SW

204979 Eldo RF Op SW 225431 Calibre xRC to ADMS Op SW

248337 Calibre RealTime Ap SW

241456 Calibre Pattern Match Op SW

241971 Calibre InRoute Op SW

IC Flow/Pyxis 248461 Calibre xACT SOC Ap SW

221496 IC EDIF200 Sch Writer Stn SW 250155 Calibre Multi-Patterning Op SW

221499 IC EDIF300/400 Netlist Read Stn SW 261025 Calibre xACT Ap SW

221500 IC EDIF300/400 Netlist Write Stn SW 261024 Calibre xRC Ap SW

221495 IC EDIF300/400 Sch Read Bnd SW

221497 IC EDIF300/400 Sch Write Stn SW Calibre Manufacturing Tools

54743 Back Annotation Op SW 203329 Calibre ORC Op SW

51688 Pyxis Plot Ap SW 204413 Calibre OPCpro Op SW

210433 Pyxis Assemble Op SW 204414 Calibre PRINTimage Op SW

249131 Pyxis Schematic Ap SW 204415 Calibre PSMgate Op SW

249135 Pyxis Implement Stn SW 204416 Calibre WORKbench Ap SW

202148 Pyxis Digital Devices Op SW 205564 Calibre MT-OPCpro Op SW

202149 Pyxis Analog Devices Op SW 207041 Calibre LITHOview Ap SW

209427 Calibre FRACTUREm Op SW

210899 Calibre MDPview Ap SW

IE3D 211030 Calibre FRACTUREj Op SW

250838 HL 3D EM_Acceleration Bnd SW LINUX 211565 Calibre nmBias Op SW

WIN 211566 Calibre OPCsbar Op SW

212329 Calibre FRACTUREt Op SW

Calibre Design Tools Platform 220546 Calibre FRACTUREh Op SW

61498 Calibre nmDRC Ap SW 220547 Calibre MDPmerge Op SW

61499 Calibre nmDRC-H Op SW 224371 Calibre MPCPro Op SW

61501 Calibre nmLVS Ap SW 224372 Calibre MDP Embedded SVRF Op SW

61401 Calibre nmLVS-H Op SW 225747 Calibre OPCverify Op SW

210570 Calibre RVE/QDB-H Ap SW 225771 Calibre ILO Op SW

210230 Calibre Interactive Ap SW 226095 Calibre FRACTUREc Op SW

223993 Calibre ADP Op SW 231209 Calibre FRACTUREv Op SW

208309 Calibre CB Ap SW 231210 Calibre MetrologyAPI Op SW-LSL3

226492 Calibre LFD Ap SW 231422 Calibre nmOPC Op SW

234967 Calibre YieldAnalyzer Bnd SW 235012 Calibre MASKOPT Op SW

234968 Calibre YieldEnhancer Bnd SW 237747 Calibre nmMPC Op SW

205003 Calibre MT-2nd CPU Op SW 238686 Calibre FRACTUREall Op SW

221191 Calibre xL Op SW 240233 Calibre nmDP Op SW

218002 Calibre xRC CB Ap SW 242811 Calibre nmOPC DDL Op SW

223155 Time-it Op SW 242817 Calibre Pixbar Op SW

235811 Calibre PERC Ap SW 242837 Calibre nmSRAF Op SW

67851 xCalibrate Ap SW 248195 Calibre EUV Op SW

210681 Calibre DESIGNrev Ap SW 250064 Calibre pxOPC Ap SW

262694 Calibre MDPDefectAvoidance Op SW

263057 Calibre WORKbench nmModelflow Op SW

LINUX

SUN

LINUX

SUN

LINUX

SUN

LINUX

SUN

LINUX

SUN


DESIGN VERIFICATION & TEST HEP’s Design, Verification and Test bundle provides complete solutions for HDL design, verification, synthesis and test of ASICs and FPGAs:

Questa Advanced Functional Verification Platform – Completely standards based, Questa is the most advanced functional verification product in the industry, supporting assertion based verification, coverage driven verification, testbench automation and formal analysis of clock domain crossing, supported by a comprehensive suite of Verification IP.

FPGA Design and Verification – A complete solution comprising HDL design, simulation, hardware/software co-verification and leading FPGA logic and physical synthesis.

C Based Design and Verification – A comprehensive suite of tools for design creation and analysis using C and System C.

Tessent Silicon Test – A complete technology-leading solution for testability analysis, scan, boundary scan and memory test synthesis, and automatic test pattern generation.

Hardware-Software Co-Verification – The industry’s leading solution for verification of hardware and software.

System Modeling – A complete environment for creation and verification of mixed-signal and Multilanguage systems, prevalent in automotive electrical systems, control systems and mechatronic systems.


DESIGN VERIFICATION & TEST TOOLS

Design Entry & Synthesis Platform Silicon Test Platform

252991 HDL Designer Ap SW

LINUX SUN WIN

43879 Tessent FastScan Ap SW

LINUX SUN

242631 Visual IP-XACT Ap SW 202287 Tessent FastScan MacroTest Op SW

211639 Precision RTL Synthesis Ap SW 211099 Tessent TestKompress Ap SW

233858 Precision RTL Plus Ap SW 225549 Tessent Diagnosis Ap SW

204434 Leo Spectrum Lev 3-ASIC Op SW 51569 Tessent Scan Ap SW (DFTAdvisor)

204435 Leonardo Insight Op SW 253473 Tessent IJTAG Ap SW

204436 Spectrum Lev 3 ASIC-VLOG Ap SW 268571 Tessent MemoryBIST-NS Ap SW

204437 Spectrum Lev 3 ASIC-VHDL Ap SW 268573 Tessent BoundaryScan-NS Ap SW

204439 XLIB Creator Ap SW WIN High Level Design Platform System Level Engineering Platform

236144 Vista Architect Stn SW LINUX SUN WIN

251438 SystemVision Integration Ap SW WIN

232656 Visual SLD Pro Stn SW-MD 239154 Visual SLD Pro LNL Plus Stn SW 235983 ReqTracer Ap SW Functional Verification Platform

248496 Questa Prime Ap SW

LINUX SUN WIN

(Includes ModelSim functionality) 248475 Questa Ultra Bnd SW 248497 Questa Verification Management Op SW 248498 Questa Power Aware Simulation Op SW 235831 Questa Verification IP Library Ap SW 222972 Questa CDC-FX Op SW 243168 Questa CDC Ap SW 252328 Questa Formal Multi-Core Op SW 258833 Questa Formal AutoCheck Ap SW 258834 Questa Formal CoverCheck Op SW 258835 Questa Formal PropCheck Op SW 258836 Questa Formal PropGen Op SW 258837 Questa Formal X-Check Op SW 258838 Questa CDC ResetCheck Op SW 204610 FormalPro ASIC LEC Ap SW LINUX

SUN

54769 Schematic Generator V8 Ap SW


HIGH LEVEL SYNTHESIS

The Catapult High-Level Synthesis Platform empowers designers to use industry-standard ANSI C++ and System C to describe functional intent and move up to a more productive abstraction level.

From these high-level descriptions, Catapult generates production-quality RTL. By speeding time to RTL and by automating the generation of bug free RTL, Catapult significantly reduces the time to verified RTL. The Catapult Platform pairs synthesis with the power of formal C property checking to find bugs early at the C/C++/System C level and to comprehensively verify source code before synthesis.

The Higher Education version of Catapult C enables you to teach the concept of high-level synthesis and to investigate various architectures without having to manually write HDL code.

High-Level Synthesis Platform

266339 Catapult-HEP-University Edition Ap SW LINUX SUN WIN

266018 SystemC Input Op SW

222165 Catapult C Lib Builder Ap SW


AUTOMOTIVE & SYSTEM DESIGN & ANALYSIS Mentor Graphics automotive and systems solutions apply deep expertise in systems engineering to help our customers solve the most complex design challenges facing the industry. This includes design tools, software, and solutions to tame exponential complexity. With the broadest portfolio of automotive and system design tools and software and deep experience in systems engineering,

AUTOMOTIVE SOLUTIONS Over the last 20 years the number of mechatronic systems in the typical automobile has grown from an average of four to more than 20 and as many as 80. In response to the need for improved quality, efficiency and functionality of the design-to-manufacture flow while managing costs across the product life cycle, Mentor Graphics’ solutions respond to the demanding problems of modern system design. Mentor Graphics offers design bundles specifically for automotive and aerospace engineering, comprising:

Capital Electrical Systems and Harness – Electrical distribution system design, simulation and analysis, design data and change management, engineering and manufacturing analysis and support, enterprise integration (bridges for MCAD, PDM, etc.)

Automotive Networking – The Volcano™ suite of vehicle networking and data communications solutions can help you manage the large number of possible combinations of signal interactions brought about by the increasing number of ECUs and subsystems in today’s complex vehicle designs.

SystemVision – A complete environment for creation and simulation of mixed-signal and Multilanguage systems, prevalent in automotive electrical systems, control systems and mechatronic systems.

PCB DESIGN & ANALYSIS Mentor Graphics is the market leader in PCB design, implementation & analysis. Our integrated solutions support a complete flow for design definition with schematics & HDL, FPGA integration for reduced design cycles, an integrated layout & routing environment & powerful signal integrity analysis tools.

PADS with HyperLynx – a complete PCB design solution, combining schematic definition with powerful layout, auto-routing and simulation tools. Also includes HyperLynx for thorough electrical and thermal PCB verification. PADS with HyperLynx is the bundle we recommend for most universities and student vehicle competition teams.

MECHANICAL ANALYSIS

Mechanical Analysis Bundle provides complete solutions for electronics thermal design (electronics cooling); building heating and ventilation (HVAC); as well as 1D CFD (Computational Fluid Dynamics) and 3D-CFD software embedded in the most popular 3D MCAD packages such as Siemens NX, Solidworks and others.

http://www.mentor.com/products/vnd

http://www.mentor.com/products/vnd


ELECTRICAL SYSTEM AND HARNESS DESIGN

Capital is an advanced software suite for the electrical system and wire harness domain. Used by leading automotive, aerospace and harness makers, Capital is built to support the complex demands of integrated processes from initial vehicle definition through design, manufacture and service. This includes electrical distribution system design, simulation and analysis, design data and change management, engineering and manufacturing analysis and support, enterprise integration (bridges for MCAD, PDM, etc.). Benefits

Fully integrated application suite for electrical system design, electrical analysis, system integration / wiring design and harness engineering.

Powerful embedded data management capabilities (vehicle configuration management, design comparison, data sharing etc.).

Productivity enhanced by modern technologies (wiring synthesis, interpretive analysis, diagram synthesis, etc.).

Advanced simulation for optimal wire and fuse sizing plus harness weight reduction.

Supports the following 3D MCAD integrations – Solidworks, PTC ProEngineer and Siemens NX.

Architected for large organizations (multi-user, multi-site) with powerful enterprise integration capabilities.

ELECTRICAL & WIRE HARNESS TOOLS

Capital Harness Platform Capital Harness Platform

237294 Capital Integrator Comp Ap SW

LINUX SUN WIN

262220 Capital Explorer Ap SW

LINUX SUN WIN

237474 Capital HarnessXC Adv Bnd SW 264497 Capital Workbooks Ap SW

237475 Capital Analysis Bnd SW 264818 Capital Devices Ap SW

238621 Capital Brg XC ProE Op SW 264819 Capital Systems Capture Ap SW

239184 Capital Insight Op SW 264820 Capital Systems Architect Ap SW

240873 Capital Topology Op SW 267141 Capital CostingXC Ap SW

246247 Capital Brg Log SWorks Op SW 267142 Capital Converge Op SW

248024 Capital ModularXC Ap SW 249286 Capital Level Manager Op SW Vesys 2.0 Products Platform

249610 Capital Publisher Ap SW 240850 VeSys Electrical Bnd SW WIN

253933 Capital Harness TVM Ap SW 256915 Capital Brg XC SWorks Op SW SystemVision Platform

256917 Capital Brg Top SWorks Op SW 251438 SystemVision Integration Ap SW WIN


VEHICLE NETWORKING

Volcano Network Architect (VNA) is Mentor Graphics’ design and analysis tool for CAN and LIN communication systems. VNA provides design, analysis and administrative functions and supports designing systems with legacy electronic control units (ECUs) with fixed messaging. VNA is a standalone tool suitable for integration in legacy design processes as well as the ideal foundation for building a system engineering-based communication design process on. The VNA connects easily to other tools, for example enterprise-wide communication databases. Volcano Network Architect: High level requirement capturing early in the design, automatically map signals to frames for better bandwidth utilization. HW-independent, signal-based API abstracting. Volcano In-Vehicle Software: Signals-oriented API simplifies application development by abstracting the communication from the application; predictable behavior reduces testing. Volcano Test and Validation: Monitor and display multiple network signals in one tool. Advanced emulation capabilities for simulating user-defined functionality.

VEHICLE NETWORKING TOOLS Vehicle Networking Platform Vehicle Networking Platform

225668 Volcano VNA Integrator Seat 239558 Virtual Sys Integrator Ap SW

225667 Volcano VNA Data Server Lic 237528 Volcano FR Com Designer

225670 Volcano LNA Dev Seat License 237527 Volcano CAN Com Design

237563 Volcano VSA 237529 Volcano LIN Com Design

234892 Volcano VSB

SystemVision

251438 SystemVision Integration Ap SW WIN

WINWIN


EMBEDDED SOFTWARE

The Embedded Software design bundle includes a number of tools for embedded software development –

Codebench Pro ARM Embedded is an engineering tool for coding and debug targeting ARM™ processors core based processors that are widely available from many suppliers.

Virtual Codebench ARM Embedded – This version of Codebench works with simulated ARM processors enabling students to code without being tied to a hardware lab and hardware boards.

Vista Architect Station is an integrated TLM 2.0-based solution for architectural design exploration, verification and virtual prototyping. Vista enables system architects to make viable architecture decisions, and allows software engineers to validate their hardware and software early in the design cycle or when target processor boards are scarce. The Vista Architect station also includes –

o Vista Virtual Prototype (VP) Generator Standard, for generating virtual prototypes for target processors.

o Vista VP Performance Runtime, allows running a simulated ARM processor on your computer.

o Vista VP-SW-Coverage o Virtual Prototypes for I.MX6 Freescale (ARM core), Zynq platform, and ARRIA-V platform

(ARM target processors inside an FPGA).

Nucleus ReadyStart for ARM is Mentor’s compact, fast real-time operating system (RTOS). It brings together integrated software IP, tools, and services into a single, “ready-to-use” solution ideal for applications where a small footprint, connectivity, power management, and deterministic performance are essential. Nucleus ReadyStart includes demonstrations and configurations enabling immediate productivity for your next embedded application.

Embedded Software Platform Embedded Software Platform

259757 CodeBench Pro ARM Embedded 236144 Vista Architect Stn SW

263239 Virtual CodeBench ARM Embedded 257282 Vista VP Generator Standard Op SW

257284 Vista VP Performance Runtime Lic

255811 Nucleus ReadyStart ARM 257523 VP-SW-Coverage Ap SW

WIN

WIN


PADS WITH HYPERLYNX

PCB PADS

Geared toward PCB designers and engineers looking for high-value, production-proven tools, PADS Standard Plus provides schematic design, simulation and analysis, and advanced layout capabilities to produce high-quality PCBs in an intuitive and easy-to-use environment.

From analyzing to realizing, you can design, simulate, and analyze mixed-technology circuits with PADS® Analog/Mixed-Signal (AMS) cloud-based and desktop solutions.

Integrated schematic capture for creative, top-quality, electronic product design.

Access component information from a single spreadsheet without concern for data redundancy, multiple libraries or time-consuming tool overhead. PADS also comes with a proven starter library, free library translators and a wizard for generating IPC-compliant footprints.

Powerful 3D layout and auto routing capabilities within PADS enable you to design both simple and complex PCBs, regardless of their circuitry; high-speed, dense, analog and/or digital, or RF.

PADS PCB design analysis is powered by HyperLynx technology, renowned for its accuracy and ease of use. From design to manufacturing, the analysis tools within PADS help you achieve optimum efficiency with Layout Rules Validation (DRC), Electromagnetic checks, Signal Integrity, Power Integrity, Manufacturability, and Thermal Compliance.


PADS WITH HYPERLYNX

HYPERLYNX

HyperLynx® offers a complete suite of analysis and verification software that meets the needs of PCB engineers at any point in the board design flow. Easy to use and integrate into your flow, HyperLynx equips PCB engineers to efficiently analyze, solve and verify critical requirements to avoid costly re-spins. Achieve greater innovation, faster time-to-market and decreased costs with HyperLynx.

HyperLynx Analog - Full board functional simulation with SPICE, VHDL, Verilog and other industry-standard languages.

HyperLynx SI - Analyze signal integrity issues early in the design cycle to eliminate costly re-spins.

HyperLynx PI - Accurately model power distribution networks and noise propagation mechanisms, pre- and post-layout, in the PCB design process.

HyperLynx DRC - Rapidly verify complex electrical rules for PCBs.

HyperLynx Full-Wave Solver delivers unprecedented speed and capacity, through accelerated boundary element technology, while preserving gold-standard Maxwell accuracy. Achieve greater accuracy and fewer re-spins, even on the most complex structures.

HyperLynx Fast 3D Solver enables efficient, full package model creation with multi-processing for faster turnaround time. It is ideally suited for power integrity, low-frequency SSN/SSO, and complete-system SPICE model generation while accounting for skin effect impact on resistance and inductance.

HyperLynx Thermal - Fast, complete, accurate 3D modelling of complex flow and thermal fields in PCB designs


PADS WITH HYPERLYNX

PCB PADS AND HYPERLYNX TOOLS

System Design Platform Analysis and Verification Platform

263528 PADS Standard Plus Options BND Op SW

WIN

225414 HyperLynx Analog Op SW

WIN LINUX

265888 PADS Standard Plus Suite 3D Ap SW 233857 HyperLynx Thermal Ap SW

267962 PADS HyperLynx DDR Op SW 239967 HyperLynx PI Power Bnd SW

267963 PADS HyperLynx DC Drop Op SW 239967 HyperLynx PI Power Bnd SW

267964 PADS HyperLynx DRC Op SW 239985 HyperLynx SI GHz Bnd SW

268116 PADS Multi-Trace HSD Routing Op SW 266125 HyperLynx FW Solver HPC Ap SW

268118 PADS AMS Design Suite Ap SW 266126 HyperLynx Fast 3D Solver Ap SW

266268 HyperLynx DC Drop PE Ap SW

267950 HyperLynx DDR PE Ap SW

267961 HyperLynx DRC PE Ap SW

268014 HyperLynx Full-Wave Solver Ap SW

268015 HyperLynx Full-Wave Solver AccPack Ap SW

250384 HyperLynx DRC Developer AP SW


MECHANICAL ANALYSIS Mentor Graphics Higher Education Program’s Mechanical Analysis Bundle provides complete solutions for electronics thermal design (electronics cooling); building heating and ventilation (HVAC); and 3D and 1D CFD – Computational Fluid Dynamics software embedded in a mechanical CAD environment. Electronics Thermal Design - Mentor Graphics supports the complete thermal design of electronics from IC package through to system-level cooling.

FloTHERM™ - 3D computational fluid dynamics software that predicts airflow and heat transfer in and around electronic equipment, from components up to complete systems.

FloTHERM PCB™ - accelerates the conceptual thermal design of printed-circuit boards. FloEFD™ is a full-featured 3D fluid flow and heat transfer analysis package without the numerical complexity and meshing overhead of traditional CFD. FloMASTER® is the leading general purpose 1D CDF solution for modeling and analysis of fluid mechanics and pipe flow in complex systems early in the development process FloMASTER for Automotive™ has specific modules tailored to automotive design tasks –

Automotive Airside Systems for cooling packs, heat exchangers and hybrid battery cooling

Automotive Cooling Systems, e.g. modeling of cooling loads from battery packs etc.

Automotive Exhaust Systems, for cat-back exhaust design


MECHANICAL ANALYSIS

MECHANICAL ANALYSIS TOOLS

FloTHERM FloEFD

239806 FloTHERM 4 CC Parallel Solver Op SW 238141 FloEFD Ap SW

239808 FloTHERM Parallel Ap SW 238154 FloEFD Electronics Cooling Mod Op SW

240109 FloTHERM.PCB Ap SW 238395 FloEFD Adv CFD Module Ap SW

262858 FloTHERM XT Ultra Ap SW 247371 FloEFD HVAC Module Op SW

265217 FloTHERM-T3STER Auto Calibration Op SW 249608 FloEFD for Siemens NX Ap SW

238158 FloVIZ Ap SW 253703 FloEFD LED Module Op SW 269020 FloEFD for Solid Edge Ap SW

FloVENT 253586 FloEFD NX PrePost Op SW

239815 FloVENT Parallel Ap SW 266123 FloEFD EDA Bridge Op SW

239819 FloVENT 4 CC Parallel Solver Op SW

FlomMCAD Products FloMASTER

239822 FloMCAD.Bridge Ap SW 269951 FloMASTER HEP Stn SW


RENEWING MEMBERS ONLY

BUNDLES AVAILABLE FOR RENEWING MEMBERS ONLY The following two bundles, are only available to members who are renewing the use of these tools.

PCB XPEDITION We strongly encourage you to consider moving to the PADS with HyperLynx Bundle, except in cases

where Xpedition is necessary and encouraged for academic-industry partnerships.

System Design Platform Physical Design Products Platform

221965 Variant Mgr 400 Bnd SW

LINUX WIN

206143 xPCB HDI Autoroute Op SW

LINUX WIN

220524 xDX EDIF I/F Op SW 212132 Design Reuse Op SW

225311 xDX Designer 200 Bnd SW 234108 xPCB RF Op SW

219171 xDM Librarian 100 Ap SW 206079 xPCB Browser Ap SW

238784 xDM Parts Manager-Admin Ap SW 222402 xPCB Layout 200 Ap SW

206071 xDM Parts Manager-Client Ap SW 220633 xPCB FabLink 200 Ap SW

206072 xDX RF Op SW 215981 xPCB OrCAD Capture I/F Op SW

206073 xDM Parts Manager-Client Ap SW 225192 xPCB Design for Fabrication Op SW

234107 xDX RF Op SW 206059 xPCB Planner Ap SW

245599 xPCB Design for Test Op SW 206060 xPCB Viewer Ap SW

247571 xPCB Schematic Viewer Op SW 215737 xPCB Static Team Layout Op SW

241192 xSD Systems Designer Op SW 236799 xPCB 3D Viewer Op SW

253295 xDX EDIF Schem I/FxDX EDIF I/F Du Stn SW 221242 xPCB Flex Op SW

257580 xDX IOPT Op SW 227594 xPCB Embedded Passive Op SW 247560 xDX Layout Viewer Op SW 243440 xDM Land Pattern Creator 100 Ap SW

Analysis and Verification Platform Analysis and Verification Platform

221154 Eldo for HyperLynx Op SW

LINUX WIN

236251 EZwave for HyperLynx Ap SW

LINUX WIN

225414 HyperLynx Analog Op SW 239967 HyperLynx PI Power Bnd SW

239985 HyperLynx SI GHz Bnd SW 239999 HyperLynx SI DDRx Ap SW

233857 HyperLynx Thermal Ap SW 250382 HyperLynx DRC PCB Standard Ap SW

250838 HL 3D EM_Acceleration Bnd SW WIN


RENEWING MEMBERS ONLY

BUNDLES AVAILABLE FOR RENEWING MEMBERS ONLY

PCB BOARD STATION Components Platform Components Platform

34657 AccuParts V8 Op SW

LINUX SUN WIN

205653 HDLWrite PLUS V8 Ap SW

LINUX SUN WIN

66919 AccuSim-HDLA Analog Dsn Stn SW 51637 Interactive Layout V8 Ap SW

34625 AutoTherm V8 Ap SW 204418 IS Synthesizer Ap SW

203465 Continuum QS Stn SW 204422 IS_Analyzer Ap SW

51630 HDL-A/DEV V8 Op SW 204419 IS FloorPlanner Ap SW

220391 IdeaStationII SW 204420 IS Optimizer Ap SW

34649 QuickFault II Kernel V8 Op SW 204417 IS MultiBoard Op SW

62000 Board Architect Stn V8 SW 221331 TAU Ap SW

39986 Board Stn V8 SW 57105 ManufactureView V8 Ap SW

217332 EDIF 200 Netlist Reader Op SW 44164 MultiChipMod Dsnr Stn V8 SW

217333 EDIF 200 Netlist Writer Op SW 42732 PCB Mechanical I/F V8 Op SW

218751 EDIF 200 Schm Reader Op SW 34635 PCB PACKAGE V8 Ap SW

218753 EDIF 200 Schm Writer Op SW 34640 ProtoView V8 Ap SW

218752 EDIF 300-400 Schm Reader Op SW 51576 PTM:SITE V8 Op SW

218755 EDIF 300-400 Schm Writer Op SW 206644 RE AutoRouter V8 Op SW

218756 EDIF300-400 Netlist Reader Op SW 206646 RE Network AutoRouter V8 Op SW

218757 EDIF300-400 Netlist Writer Op SW 206645 RE HighSpeed V8 Op SW

57119 EngineerView Lite V8 Op SW 67977 RF Architect V8 Op SW

30000 Falcon Framework V8 Ap SW 202131 RF EM Sim Interface Op SW

51640 Falcon ITK V8 Ap SW

SUN WIN

67978 RF Layout V8 Op SW

56401 FlowXpert Ap SW 54769 Schematic Generator V8 Ap SW

56402 XpertBuilder Ap SW 215736 TeamPCB - EN Op SW

56403 ProjectXpert Ap SW


SUPPORT, TRAINING & MEMBERSHIP SUPPORT SupportNet, www.mentor.com/supportnet, Mentor’s online support, provides the fastest and easiest way to resolve your technical and licensing support issues. On SupportNet, faculty and staff may:

Access timely, product specific information

Quickly troubleshoot technical issues

Easily search documentation

Securely download the latest releases and patches for all Mentor Graphics products if you are part of the faculty

Learn, share and network with peers on Mentor Communities

Suggest and vote on product improvements with Mentor Ideas SupportNet Registration only takes a few minutes. To register, you will need your standard contact details, your university email address, and your Mentor Graphics site number. Faculty and staff may have full access to SupportNet. Students may register for SupportNet Knowledge Access to use TechNotes, AppNotes and Documentation.

TRAINING Mentor Graphics offers a wide range of classes and web-based events and is committed to ensuring that members are fully trained in the use of Mentor’s tools. In North America and Europe, faculty and teaching staff members are eligible to attend Mentor Graphics’ advertised public training classes at zero cost on a space available basis. Mentor Graphics also has an extensive portfolio of On Demand Training Libraries enabling faculty and staff to learn about our products at their own pace. To view or register for these courses, visit the Training web pages on the Higher Education Program website. For other regions, please contact your local HEP representative.

https://www.mentor.com/company/higher_ed/training

https://www.mentor.com/company/higher_ed/training


CONTACT US

North And South America Automotive Engineering Faculty & Student

Higher Education Program Vehicle Competition Teams Worldwide

Mentor Graphics Corporation Leigh Anderson

8005 SW Boeckman Road Mentor Graphics Corporation

Wilsonville, OR, 97070, USA 8005 SW Boeckman Road

Tel: +1 503 685 1691 Wilsonville, OR, 97070, USA

[email protected] Tel: +1 503 685 0661

[email protected]

Canada China

Mentor Graphics partners with CMC Microsystems to Xiang Jin

donate our design tools to CMC member universities. Mentor Graphics Shanghai Electronic Technology Co.

5F, Lujiazui Century Financial Plaza

CMC Microsystems No. 759 South Yanggao Road

Innovation Park at Queen’s University Pudong District, Shanghai, China 200127

945 Princess St., B50 Tel: +86-21-6101-6339

Kingston, ON K7L 3N6, Canada [email protected]

Tel: +1 613 530 4666

Europe Korea

Austria, Belgium, France, Germany, Switzerland Youmi Kim

Tina Vanesse Peitz Trade Tower Rm 2104 World Trade Center

Mentor Graphics (Deutschland) GmbH Kangnam-gu Seoul, Kangnam-gu

Arnulfstr. 201, 80634 München, Germany Korea 135-729

Tel: +49 89 57096 254 Tel: +82-2-3016-4431

[email protected] [email protected]

All other countries Taiwan

Frances Richards Lindsay Hsu

Mentor Graphics UK Ltd MIT Building

Rivergate, Newbury Business Park 11F, No. 120 Sec.2,

London Road Hsinchu

Newbury, Berkshire, RG14 2QB, United Kingdom Taiwan, R.O.C.

Tel: +44 1635 811 411 Tel: +866-3-513-1005


Japan Asia Pacific

Akiko Makino Gopinath Amargol

Mentor Graphics Japan Co., Ltd. Mentor Graphics Asia Pte Ltd

Gotenyama Garden (52) 7-35 238A Thomson Road #23-07/10

Kita-shinagawa 4-chome Shinagawa-Ku Novena Square Tower A

Gotenyama Hills, Japan 140-0001 Singapore 307684

Tel: + 81-3-5488-3038 Tel: +65 6357-2806

Fax: +81-3-5488-3031 Fax: +65 6779-1111


India Middle East and North Africa

Ravi Boonapalli Reham El Sebaie

Mentor Graphics Sales & Services Pvt. Ltd Mentor Graphics Egypt

RMZ Eco world, Unit No. 701 to 704 Campus 8B, 78 El Nozha Street, Heliopolis

7th Floor Sarjapur-Marathalli Outer Ring Road Cairo, 11361, Egypt

Devarabeesanahalli, Bangalore/ Karnataka, India 560103 Tel: +(202) 2414 1306

Tel: +91 (80) 3051 4029 [email protected]

[email protected]

mailto:[email protected]











all rights reserved.info.cad-is.ru/mentor graphics for universities.pdf · in this brochure you...

Documents