all phones secret codes

8/9/2019 All Phones Secret Codes

1/6

NOKIA:

CODES DESCRIPTIONS*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound qualitybut talk time is reduced my approx. 5%#3370# Deactivate Enhanced Full Rate Codec (EFR)*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you shouldgain approx 30% more Talk Time

*#4720# Deactivate Half Rate Codec*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line :Software Release Date, 3rd Line : Compression Type*#9999# Phones software version if *#0000# does not work*#06# For checking the International Mobile Equipment Identity (IMEI Number)#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)*#147# (vodafone) this lets you know who called you last

*#1471# Last call (Only vodofone)*#21# Allows you to check the number that "All Calls" are diverted to*#2640# Displays security code in use*#30# Lets you see the private number*#43# Allows you to check the "Call Waiting" status of your phone.*#61# Allows you to check the number that "On No Reply" calls are diverted to*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls arediverted to*#67# Allows you to check the number that "On Busy Calls" are diverted to*#67705646# Removes operator logo on 3310 & 3330*#73# Reset phone timers and game scores*#746025625# Displays the SIM Clock status, if your phone supports this power savingfeature "SIM Clock Stop Allowed", it means you will get the best standby time possible*#7760# Manufactures code

*#7780# Restore factory settings*#8110# Software version for the nokia 8110*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of lastrepair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch yourphone off then on again*#94870345123456789# Deactivate the PWM-Mem**21*number# Turn on "All Calls" diverting to the phone number entered**61*number# Turn on "No Reply" diverting to the phone number entered**67*number# Turn on "On Busy" diverting to the phone number entered12345 This is the default security codepress and hold # Lets you switch between lines*#3283# or *#DATE# Date of Manufacture*#682371158412125# Software Version

__________________________________________________ ________________________

SIEMENS:

MODELS CODES & DESCRIPTIONS*#0003*(secret code 8 digits)# All Siemens Phones: Service Provider UnlockSiemens S25/C25SP unlock *#0003*(secret code 8 digits)#Show IMEI code: * # 06 #Resets language to automatic selection : * # 0000 # then Green buttonPin Out


2/6

Data Cable schematicsPhone's connector pin-out:1- GND2- SB3- POWER4- NC5- TX

6- RX7- CLOCK8- DATA9- GND MIC10- HF MIC11- AUDIO12- GND AUDIOSiemens S1/S3/S3 ComTo view the software date and else with S3 com, S4, S4Power, Sony cmdx 1000e press with

SIM removed *#06# and left softkey.To view some other stuff with S4Power, Sony cmdx 1000e press with SIM removed *#06#and left softkey twice.To view the software date with S3 com, S4, S4Power, Sony cmdx 1000e press with SIMinstalled menu 98 and left softkey twice.

ACTIVATE MONITOR MODESiemens S1/S3Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 5553756,Hang-Up Button (Red Handset key)

Siemens S3 COM/S4:

Menu, 9 (Phone Options), 7 (Phone Status - 8 on Some), Left Display Button (left MENU key),7684666, Hang-Up Button (Red Handset key)Note: Now Monitor should appear at the bottom of the Network Options menu.MONITOR MODEPressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a list of the six cells with thestrongest signals.

Test Mode Indicators: (* = only available when call in progress )CH Channel Number

RX Signal Strength {D~b}

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over. (see RX and RXAM)

LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC

TXPWR Transmit Power {D~b}

RXAM Receive signal strength cut-off point

TS* Time Slot Number


3/6

TA* Timing Advance. Distance from tower in Km X 2

PL* Power LevelPOWER tablePL: 5 6 7 8 9 10 11 12 13 14 15

dB: 33 31 29 27 25 23 21 19 17 15 13

Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02LF* C1 value with continuous transmission from tower

LS* C1 Value with discontinuous transmission from tower

QF* Bit Error Rate with continuous transmission from tower

QS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) tableQF/QS register: 0 1 2 3 4 5 6 7

% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S1/S3:Here's a trick to play Tetris, also known as Klotz on a Siemens S1.Turn the phone on. Enter PIN. Before the telephone has logged in to the your GSM net do thefollowing steps.1: Choose F 9 (function settings)2: Choose send own number and push the right button for choose.3: Push 9USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.[I have just heard from one of the programmers of the phone that Tetris was in the phoneduring development, but it was removed before it was produced. Apparently someone has thepatent on games in mobile phones and Siemens didn't want to pay the licensing fees. It waseither in Menu F-9-9 or it's not there at all.]Siemens S3 Comfort

MONITOR MODE:The Siemens S3 Com series have a Monitor mode that can be activated directly from thestandard user keypad. In order to activate this mode, you must enter the special access codecurrently programmed into the phone.TO ACTIVATE MONITOR MODE:Turn the phone on.Enter the PIN access code on press OK. (Only if is enabled).Press Menu. (Left top button).Press 9. (Phone Options).Press 8. (Phone Status) (May be button 7 in some phones).You may see your IMEI NumberLeft Display Button (Top left MENU key).7684666

Hang-Up Button. (Red Handset key).

Note: Monitor should appear now at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Siemens S4/S4 Power:In phonebook under "Own Phone No." enter +12022243121 (which is the number to the WhiteHouse) and you'll get a greeting from the people who programmed the phone.


4/6

MONITOR MODE

The Siemens S4 series have a Monitor mode that can be activated directly from the standarduser keypad. In order to activate this mode, you must enter the special access code currentlyprogrammed into the phone.TO ACTIVATE MONITOR MODE:Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 7684666,

Hang-Up Button (Red Handset key)Now "Monitor" should appear at the bottom of the Network Options menu.Pressing the right Display Button when in monitor mode will show a list of the six cells with thestrongest signals.

Test Mode Indicators: (* = only available when call in progress )

--------------------CH Channel NumberRX Signal Strength {D~b}N NCC (Color Code)B BCC (Color Code)

CI Cell ID (in Hex)C1+ how long before phone does forced hand over. (see RX and RXAM)LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSCTXPWR Transmit Power {D~b}RXAM Reeceive signal strength cut-off pointTS* Time Slot NumberTA* Timing Advance. Distance from tower in Km X 2PL* Power Level

Power Table

PL: 5 6 7 8 9 10 11 12 13 14 15dB: 33 31 29 27 25 23 21 19 17 15 13

Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02

LF* C1 value with continuous transmission from towerLS* C1 Value with discontinuous transmission from towerQF* Bit Error Rate with continuous transmission from towerQS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) tableQF/QS register: 0 1 2 3 4 5 6 7% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Siemens S6/S10:

In Phonebook, store as your own number: +12022243121Then you get the sun and two palms in the display, also a greeting message of the "MMI-

team".It has been said that the phone number is the number of the Capitol building in Washington,DC (but not sure).

Siemens S15 Secret Menu's

Press * -> # -> 7 -> 4 -> 3 -> 6 -> 3 -> 6 -> 7 -> * -> 8 -> 3 ->


5/6

7 -> 8 -> # ,press clear key to clear screen and return tostand-by modepress Menu, it will show additional menuMenu 3.3.4 Band selection,Menu 3.3.4.1 Automatic band selection,Menu 3.3.4.2 select GSM 900 only,Menu 3.3.4.3 select GSM 1800 only,

Menu 10 Engineering,Menu 10.1 MS info,

Menu 10.2 software detail,Menu 10.2.1 software version,Menu 10.2.2 EEPROM version,

Menu 10.3 Test/production detailsMenu 10.3.1 Hardware deta

Menu 10.3.2 production detaMenu 10.3.3 Service detaMenu 10.3.4 Mechanical deta

Menu 10.1.1 MS info on, then on the screen show these, for example:

FCN RXL C1 C2642 011+11+91 -> PAGE 1

CID DSC CB11211 045 000 -> PAGE 2

BCC NCC TN000 002 00 -> PAGE 3

RXf RXs RQf RQs00 00 00 00 -> PAGE 4

ATa APa Hn Hf

001 000 05 00 -> PAGE 5

DTU DTD HP CI+ ? - - -> PAGE 6

MM CC RRIdNS Nul Idl -> PAGE 7

__________________________________________________ ________________________PANASONIC:

CODES DESCRIPTIONS*#06# For checking the International Mobile Equipment Identity (IMEI Number)

__________________________________________________ ________________________

MOTOROLA:

CODES DESCRIPTIONS*#06# For checking the International Mobile Equipment Identity (IMEI Number)[][][] 119 [] 1 [] Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best soundquality but talk time is reduced my approx. 5%[][][] 119 [] 0 [] Deactivate Enhanced Full Rate Codec (EFR)

__________________________________________________ ________________________


6/6

ERICSSON:

CODES DESCRIPTIONS*#06# For checking the International Mobile Equipment Identity (IMEI Number)Shortcuts:Save a Missed Call into your phone directory Scroll to "Missed Call", press "Yes" to display therequired number. Press any number (i.e. 0 to 9), then press "clear" once to clear that number,

then press & hold "" twice to choose "HideId?" & then press "Yes". Also works for pre-programmed & last dialled numbers just press"No" & wait for the number to appear on the screen first then follow same procedureCheck you battery level when phone is off Press "No" quickly one time & wait for the batterymeter to show up!Save a number into your phone memory (not SIM card) Follow normal procedures to store aphone number. When prompted to set a storage position, press "#" once & key in desired

location, or press "#" twice for next available positionCall a phone number from SMS message You can call from within a SMS message if the phonenumber is written in it. Just scroll the message until the phone number appears on the display,then press "Yes" to call.

all phones secret codes

Documents