all in one our led spotlight connectors - · pdf fileall in one... our led spotlight...
TRANSCRIPT
LED - light- and connection technology
Spotlight connectors for COBs fromWith integrated reflector interface
All in one...our LED Spotlight connectors
2 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
The Advantages at a glance
• Compatibletostandardisedspotlightmodulsastoholepatternand
externaldiameter
• Serviceable–easyexchangeofLEDboard
• Highlightefficiencybytheuseofhighreflectivematerial
• Twodefinedreflectorinterfacesformetalorplasticreflectors
3 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
COB assembly made easy
Zhaga hole patternFixationviastandardscrewsandlockingwashers
Solder free connectionUsingpushwireter-minals.Wiringcanbearrangedtooneside.
Internal reflector interfaceForplasticandmetalreflectors
Insert, Twist, DoneSimplefixationviaTwist&Lock
Inverse-polarity protectionThepolarityisclearlyvisi-blefromtheoutside,evenwhentheCOBinserted
Pre-centring:SlidetheCOB...
Pre-centering:...betweentheflexibleCOBholders.
Secure FixationTheCOBsaresecurelyheldinplaceduringtheassemblyprocess
4 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
Overview of different prefixation types
Light source Connector Features
SLEG6LES10(13.5x13.5mm)
Ø40mmBJB47.319.6060
Ø40mmBJB47.319.6294
Ø40mmBJB47.319.6295
SLEG6LES15,17(19x19mm)
Ø50mmBJB47.319.2021
Ø50mmBJB47.319.2023
Ø50mmBJB47.319.2025
Fixingelements,0.5mm²
COBholders,0.75mm²
Positioningwindow,0.5mm²
COBholders,0.5mm²
Positioningwindow,0.75mm²
COBholders,0.5mm²
5 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
Overview of different prefixation types
Light source Connector Features
SLEG6LES15,17(19x19mm)
Ø50mmBJB47.319.2026
Ø40mmBJB47.319.6024
SLEG6LES19,23(31x31mm)
--- ---
Fixingelements,0.75mm²
COBholders,0.5mm²
LED - Lighting and connection technology
Spotlight connectors for COB LED modules from Tridonic
6 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
47.319
pkg.
504
wt.
3 g
part no.
47.319.6060.50
With integrated reflector interface
Easy pre-assembly by LED fixing lugs
Connector for COBs SLE G3 LES 10/G5 LES 6/10/11 und G6 LES 10 mm from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC
Approval: additional cULus
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.5 mm² 0.5 mm² 14
pkg.
420
wt.
3 g
part no.
47.319.6024.50
With integrated reflector interface
Easy pre-assembly by LED fixing lugs
Connector for COBs SLE G4/G5 LES15 and SLE G6 LES17 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC
Approval: additional cULus
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.5 mm² 0.5 mm² 14
pkg.
420
wt.
3 g
part no.
47.319.6025.50
With integrated reflector interface
Easy pre-assembly by LED fixing lugs
Connector for COBs SLE G4/G5 LES15 and SLE G6 LES17 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC
Approval: additional cULus
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.75 mm² 0.75 mm² 14
LED - Lighting and connection technology
Spotlight connectors for COB LED modules from Tridonic
7 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
47.319
pkg.
420
wt.
5 g
part no.
47.319.6294.50
With integrated reflector interface
Easy pre-assembly by LED fixing lugs
Connector for COBs G4 LES10 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC (VDE)
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.5 mm² 0.5 mm² 14
pkg.
420
wt.
5 g
part no.
47.319.6295.50
With integrated reflector interface
Easy pre-assembly by LED fixing lugs
Connector for COBs G4 LES10 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC (VDE)
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.75 mm² 0.75 mm² 14
pkg.
504
wt.
5 g
part no.
47.319.2021.50
With integrated reflector interface
Easy assembly by vision panels
Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC
Approval: additional cULus
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.5 mm² 0.5 mm² 14
LED - Lighting and connection technology
Spotlight connectors for COB LED modules from Tridonic
8 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
47.319
pkg.
504
wt.
5 g
part no.
47.319.2023.50
With integrated reflector interface
Easy assembly by vision panels
Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC
Approval: additional cULus
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.75 mm² 0.75 mm² 14
pkg.
420
wt.
5 g
part no.
47.319.2025.50
With integrated reflector interface
Easy pre-assembly by LED fixing lugs
Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC
Approval: additional cULus
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.5 mm² 0.5 mm² 14
pkg.
420
wt.
5 g
part no.
47.319.2026.50
With integrated reflector interface
Easy pre-assembly by LED fixing lugs
Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic
Screw fixing
Housing: PBTContacts: CuSn
Rating: 3A / 150 VDC
Approval: additional cULus
• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289
0.75 mm² 0.75 mm² 14
LED - Lighting and connection technology
9 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
Reflectors for Spotlight connector series
47.940
pkg.
150
wt.
8 g
part no.
47.940.-311.56
Reflector
For use with Spotlight connectors 47.319.6060, 47.319.6101, 47.319.6200 and 47.319.6180
Reflector: PC
Beam angle characteristic: Flood
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
pkg.
150
wt.
8 g
part no.
47.940.-312.56
Reflector
For use with Spotlight connectors 47.319.6060, 47.319.6101, 47.319.6200 and 47.319.6180
Reflector: PC
Beam angle characteristic: Medium
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
pkg.
150
wt.
8 g
part no.
47.940.-313.56
Reflector
For use with Spotlight connectors 47.319.6060, 47.319.6101, 47.319.6200 and 47.319.6180
Reflector: PC
Beam angle characteristic: Spot
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
LED - Lighting and connection technology
10 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
Reflectors for Spotlight connector series
47.950
pkg.
160
wt.
8 g
part no.
47.950.-301.56
Reflector
For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx
Reflector: PC
Beam angle characteristic: Spot
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
pkg.
160
wt.
8 g
part no.
47.950.-302.56
Reflector
For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx
Reflector: PC
Beam angle characteristic: Medium
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
pkg.
160
wt.
10 g
part no.
47.950.-303.56
Reflector
For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx
Reflector: PC
Beam angle characteristic: Flood
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
LED - Lighting and connection technology
11 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
Reflectors for Spotlight connector series
47.950
pkg.
1
wt.
10 g
part no.
47.950.-304.56
Reflector
For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx
Reflector: PC
Beam angle characteristic: Spot
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
pkg.
1
wt.
10 g
part no.
47.950.-305.56
Reflector
For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx
Reflector: PC
Beam angle characteristic: Medium
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
pkg.
1
wt.
10 g
part no.
47.950.-306.56
Reflector
For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx
Reflector: PC
Beam angle characteristic: Flood
• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer
14
LED - Lighting and connection technology
12 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
Reflectors for Spotlight connector series
47.950
pkg.
1
wt.
3 g
part no.
47.950.-401.85
Diffusor plate L2
For use with reflectors 47.950.-30x with Ø74 mm
Diffusor plate: PC
14
pkg.
1
wt.
3 g
part no.
47.950.-402.85
Diffusor plate L6
For use with reflectors 47.950.-30x with Ø74 mm
Diffusor plate: PC
14
pkg.
1
wt.
3 g
part no.
47.950.-403.85
Diffusor plate L12F
For use with reflectors 47.950.-30x with Ø74 mm
Diffusor plate: PC
14
LED - Lighting and connection technology
13 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
Reflectors for Spotlight connector series
47.950
pkg.
1
wt.
3 g
part no.
47.950.-404.85
Diffusor plate oval
For use with reflectors 47.950.-30x with Ø74 mm
Diffusor plate: PC
14
14 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016
General information
LED - Lighting and connection technology
Single push wire terminals
For solid conductors within the cross sectional range stated(In this example 0.5 mm2)When regulations deviate from IEC, other cross sec-tions are possible (e. g. UL / CSA: cable 18 AWG).
Temperature rating T 110ThemaximumoperatingtemperatureisgivenbyaTmarking.Thisisthemaximumoperatingtemperatureforwhichtheproductisdesigned.
LED connector
Additional informationFurther information about the products shown on this page can be found on the pages shown within this symbol.
Allarticlesinthiscataloguehavebeendesignedaccordingtotheappropriatenationalandinternationalstandards(VDE/IEC).Thechoiceofproductandcorrecttechnicalembodimentisthesoleresponsibilityoftheuser.Exactinformationcanbeobtaineduponrequest.Wereservetherighttomodifyproducts.
Explanation of the symbols shown on the product pages.
CAD-Data in 2D or 3D format available
For tinned wire ends within the cross sectional range stated(In this example 0.25 - 0.5 mm2)When regulations deviate from IEC, other cross sec-tions are possible (e.g. UL / CSA: cable 18 AWG).
0.25 - 0.5 mm2
0.5 mm2
14
BJB GmbH & Co. KG · Werler Str. 1 · 59755 Arnsberg · GermanyTelefon +49 2932 982-0 · Fax +49 2932 [email protected] · www.bjb.com