alfa laval - lkrk spray balls
TRANSCRIPT
LKRK Spray Ball
The LKRK spray ball is used for the cleaning process andstorage tanks in dairies, breweries and the overall foodindustry etc.
Standard DesignLKRK is a pressed ball made of a stainless steel sheetavailable with diameters of 2.5 and 3.7 inches. The CIPsupply pipe is connected to the socket of the spray ballby means of a locking pin. The socket is dimensioned forISO or DIN tubes. The spray ball has a flat shoulder withholes to enable thorough cleaning of the supply pipe.LKRK can be drilled with the following patterns:
1) B-version for directing the spray pattern to the bottom area of the tank.
2) T-version for directing the spray pattern to the top area of the tank.3) F-version for directing the spray pattern all over the tank.
The 2.5" spray ball is available with 0.079 " holes, and the3.7" spray ball is available with 0.079 or 0.12" holes. (Seecapacity diagrams).
MaterialsProduct wetted steel parts: Acid-resistant steel
AISI 316LFinish: ≤ 32 RA
ConnectionsType LKRK 64 (Dia. 2.5") ISO tube: OD = 0.98"
Din tube: OD = 1.1"
Type LKRK 94 (Dia. 3.7") ISO tube: OD = 2.01"DIN tube: OD = 2.05"
OD = Outside diameterID = Inside diameter
Dimensions (inches)
Figure 2. Dimensions
A
B
ID
OD
t
Size
A
B
ISO tubeOD/ID/t
DIN tubeOD/ID/t
Pipe range 1
DIN tubeOD/ID/t
Pipe range 2
Weight (lbs.)
2.5-inch
2.28
0.69
1.12/1.00/0.06
1.28/1.12/0.08
1.35/1.16/0.09
0.44
3.7-inch
3.05
0.89
2.14/2.02/0.06
2.14/2.06/0.06
2.26/2.10/0.08
0.66
Figure 1. LKRK Spray Ball
Alfa LavalP.O. Box 5819098201 104th StreetPleasant Prairie, WI 53158-0909Telephone: 800-558-4060Fax: 262-947-4728www.us.flow.alfalaval.com
Pressure Drop/Capacity Diagrams
bottom drilled
top drilled
fully drilled
bottom drilled
top drilled
fully drilled
bottom drilled
top drilled
fully drilled
Cleaning Range of 0.079" Spray Holes
Cleaning Range of 0.12" Spray Holes
Figure 3. Type LKRK 64 with 0.079” holes
Figure 4. Type LKRK 94 with 0.079” holes, 2” tube
Figure 5. Type LKRK 94 with 0.12”holes, 2” tube
50.4
58.7
67.0Ft.
21.8
25.4
29.0PSI
41.818.1
33.514.5
25.210.9
16.97.3
8.33.6
0.00.022.0 44.0 66.0 GPM
50.4
58.7
67.0Ft.
21.8
25.4
29.0PSI
41.818.1
33.514.5
25.210.9
16.97.3
8.33.6
0.00.044.0 132.0 220.0 GPM88.0 176.0 264.0 308.0
50.4
58.7
67.0Ft.
21.8
25.4
29.0PSI
41.818.1
33.514.5
25.210.9
16.97.3
8.33.6
0.00.044.0 88.0 132.0 GPM
50.4
58.7
67.0Ft.
21.8
25.4
29.0PSI
41.818.1
33.514.5
25.210.9
16.97.3
8.33.6
0.00.03.3 6.6 9.8 13.1 16.4 Ft.
3.3 6.6 9.8 13.1 16.4 Ft.
50.4
58.7
67.0Ft.
21.8
25.4
29.0PSI
41.818.1
33.514.5
25.210.9
16.97.3
8.33.6
0.00.0
Laminar jet(RecommendedWorking range)
Laminar jet(RecommendedWorking range)
Transition Range
Transition Range
Max. Range
Max.Range
LKRK Spray Ball PD SheetVersion 2
September, 2000