alcatel b8 parameters
TRANSCRIPT
-
7/31/2019 Alcatel B8 Parameters
1/928
-
7/31/2019 Alcatel B8 Parameters
2/928
Status RELEASED
Short title
All rights reserved. Passing on and copying of this document, useand communication of its contents not permitted without writtenauthorization from Alcatel.
BLANK PAGE BREAK
2 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
3/928
Contents
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1 Parameter Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.2 Parameter Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.3 Modified Telecom Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2 LCS Telecom Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1 Network (CDE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122.2 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3 GSM Telecom Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.1 Network (CDE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463.2 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1353.3 System (CST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 652
4 GPRS Telecom Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655
4.1 Network (CDE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6564.2 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 684
5 E-GPRS Telecom Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 907
5.1 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 908
6 2G-3G Telecom Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 915
6.1 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 916
3BK 20824 AAAA PCZZA Ed.07 3 / 930
-
7/31/2019 Alcatel B8 Parameters
4/928
Contents
4 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
5/928
Preface
Preface
Purpose The BSS Parameter Dictionary lists all of the Telecom Parameters for GSMand GPRS.
Whats New In Edition 07
This document has been extracted from the edition 14 of the telecomparameters database.
Parameters have been updated, removed or added.
In Edition 06
This document has been extracted from the edition 13 of the telecomparameters database.
Parameters have been updated, removed or added.
In Edition 05
This document has been extracted from the edition 12 of the telecomparameters database.
Parameters have been updated, removed or added.
In Edition 04
This document has been extracted from the edition 11 of the telecomparameters database.
Parameters have been updated, removed or added.
In Edition 03This document has been extracted from the edition 10 of the telecomparameters database.
3BKA55CBR110864 - Dynamic SDCCH allocation
3BKA55CBR068370 - Circuit Switched telecom improvementsEnhanced cell
re-selection (R97) and Network controlled cell re-selection (NC2) in packet
transfer mode.
3BKA55CBR114395 - Full intra-RA LLC PDU re-routing
3BKA55CBR114400 - Transmission Resource handling
3BKA55CBR120754 - GPRS with Abis/Ater over satellite links
3BKA55CBR68414 - Support of CS-3 / CS-4
3BKA55CBR68415 - E-GPRS Support
3BK 20824 AAAA PCZZA Ed.07 5 / 930
-
7/31/2019 Alcatel B8 Parameters
6/928
Preface
3BKA55CBR114404 - 3G search deactivation in PTM
3BKA55CBR052845 - Location Services (LCS)
3BKA55CBR128909 - GCH Congestion Control
In Edition 02
This document has been extracted from the edition 4 proposal 2 of the telecom
parameters database.In Edition 01
This document has been extracted from the edition 4 of the telecom parametersdatabase.
Audience This manual is designed for OMC-R users, O&M technicians and systemdesigners.
Assumed Knowledge Not applicable.
6 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
7/928
1 Introduction
1 Introduction
3BK 20824 AAAA PCZZA Ed.07 7 / 930
-
7/31/2019 Alcatel B8 Parameters
8/928
1 Introduction
1.1 Parameter Classification
The GSM and GPRS parameters are classified into three categories:
Network: customer dependent parameters, related to the network topology,
defined by the customer and valid for the complete network (e.g. BTS name,
Cell ID, LAC number ...). They can be adjusted by CDE scripts.
Site: adjustable parameters from one cell to the next or from one BSC to the
next. They are set to a default value. They can be adjusted from the OMC-R.
System: fixed parameters, i.e. BSS system mandatory rules or
automatically populated in the DLS skeleton and let unchanged because
not customer dependent. Some of them are coded in BTS Software and
configuration files.
1.2 Parameter Description
To each parameter are associated the following characteristics:
Logical Parameter Name: Mnemonic conventionally used in Alcatel
documentation.
Definition: definition/purpose of the parameter.
Coding rules:, Rules of coding, when necessary.
Mandatory rules: Mandatory relationships or inter-dependence of some
data.
Recommended rules: Recommended relationships or inter-dependence
of some data.
Feature: Indicates to which feature the parameter is linked.
Category: Category into which the parameter is classified.
Instance: Possible instance of the parameter.
Value
Min/Max values: Possible range of the parameter values.
Default value: Parameter value in release B7.2 for a generic
configuration.
Modifiable: Indicates if the parameter is modifiable at the OMC-R.
Parameter Access: Indicates where the parameter is accessible at the
OMC-R.
External Comments: Specific information, when necessary, related
to the parameter.
8 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
9/928
1 Introduction
1.3 Modified Telecom Parameters
LOGICAL Name FEATURE
CS_BLER_DL_4_3 B8: High Speed Data Service
EN_FULL_IR_DL xxxx
MAX_PDCH ICOD2 : Enhanced PDCH traffic adaptation to cell loadvariation
NB_TS_MPDCH (BSC) B8: High Speed Data Service
NB_TS_MPDCH (MFS) B8: High Speed Data Service
TRX_PREF_MARK Improvements in radio channel selection : preference markapplied to TRX
3BK 20824 AAAA PCZZA Ed.07 9 / 930
-
7/31/2019 Alcatel B8 Parameters
10/928
1 Introduction
10 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
11/928
2 LCS Telecom Parameters
2 LCS Telecom Parameters
3BK 20824 AAAA PCZZA Ed.07 11 / 930
-
7/31/2019 Alcatel B8 Parameters
12/928
2 LCS Telecom Parameters
2.1 Network (CDE)
2.1.1 (BSS_LCS_Resume_handling) - (BSS_LCS_Resume_handling)
HMI Name BSS_LCS_Resume_handlingParameter Name
Logical Name BSS_LCS_Resume_handling
Definition flag enabling or disabling the resumption of a location procedures inthe BSS, after an intra-BSS handover or a RR procedure, duringA-GPS procedures.
Coding rules 0= BSS LCS resumption is disabled , 1 = BSS LCS resumption isenabled
Mandatory rules
Recommended rules
Category Network (CDE)
Type Flag
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
None 0 1 1
Modifiable OMC Changes: RNO Changes:
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
12 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
13/928
2 LCS Telecom Parameters
2.1.2 (CONFIDENCE_ORIGIN) - (CONFIDENCE_ORIGIN)
HMI Name CONFIDENCE_ORIGINParameter Name
Logical Name CONFIDENCE_ORIGIN
Definition Confidence origin used in the 3D linear regression of the Confidenceof the ellipsoid arc returned by the MFS when providing the referencelocation to the A-GPS server.
Coding rules step size = 0.1
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
% 0 100 50.7
Modifiable OMC Changes: RNO Changes:
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 13 / 930
-
7/31/2019 Alcatel B8 Parameters
14/928
2 LCS Telecom Parameters
2.1.3 (CONFIDENCE_VS_ARC_FACTOR_SLOPE) -
(CONFIDENCE_VS_ARC_FACTOR_SLOPE)
HMI Name CONFIDENCE_VS_ARC_FACTOR_SLOPEParameter Name
Logical Name CONFIDENCE_VS_ARC_FACTOR_SLOPE
Definition Slope ratio between the confidence and the arc factor used in the 3Dlinear regression of the confidence of the ellipsoid arc returned bythe MFS when providing the reference location to the A-GPS server.
Coding rules step size = 0.1
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
% 0 100 25
Modifiable OMC Changes: RNO Changes:
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
14 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
15/928
2 LCS Telecom Parameters
2.1.4 (CONFIDENCE_VS_RADIUS_SLOPE) -
(CONFIDENCE_VS_RADIUS_SLOPE)
HMI Name CONFIDENCE_VS_RADIUS_SLOPEParameter Name
Logical Name CONFIDENCE_VS_RADIUS_SLOPE
Definition Slope ratio between the confidence and the sum of minimum radiusfactor and maximum radius factor used in the 3D linear regressionof the confidence of the ellipsoid arc returned by the MFS whenproviding the reference location to the A-GPS server.
Coding rules step size = 0.01
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
% 0 100 15.28
Modifiable OMC Changes: RNO Changes:
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 15 / 930
-
7/31/2019 Alcatel B8 Parameters
16/928
2 LCS Telecom Parameters
2.1.5 (MS_BASED_AGPS_ASSIST_DATA_LIST) -
(MS_BASED_AGPS_ASSIST_DATA_LIST)
HMI Name MS_BASED_AGPS_ASSIST_DATA_LISTParameter Name
Logical Name MS_BASED_AGPS_ASSIST_DATA_LIST
Definition Bitmap (8 bits) defining the types of optional assistance data to beretrieved from the A-GPS server when using the MS based A-GPSpositioning method. The following optional assistance data type areconsidered: Almanac, UTC model, DGPS corrections, referencetime, acquisition assistance, real-time integrity.
Coding rules bit 8 (most significant) and bit 7 are not used (i.e. always set to 0); bit6=1: real-time integrity is retrieived; bit 5=1: acquisition assistanceis retrieived; bit 4=1: reference time is retrieived; bit 3=1: DGPScorrections is retrieived; bit 2=1: UTC model is retrieived; bit 1 (least
significant)=1: Almanac is retrieived.
Mandatory rules
Recommended rules
Category Network (CDE)
Type Reference
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
None 0 63 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
16 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
17/928
2 LCS Telecom Parameters
2.1.6 (PREF_GPS_LIST_Priority_1) - (PREF_GPS_LIST_Priority_1)
HMI Name PREF_GPS_LIST_Priority_1Parameter Name
Logical Name PREF_GPS_LIST_Priority_1
Definition The most preferred GPS positioning method.
Coding rules It contains a reference to a GPS method: 1 for MS Assisted A-GPS,2 for MS Based A-GPS, 3 for Conventional GPS.
Mandatory rules
Recommended rules The same GPS methods reference should not be used for differentpriorities
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
None 1 3 1
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 17 / 930
-
7/31/2019 Alcatel B8 Parameters
18/928
2 LCS Telecom Parameters
2.1.7 (PREF_GPS_LIST_Priority_2) - (PREF_GPS_LIST_Priority_2)
HMI Name PREF_GPS_LIST_Priority_2Parameter Name
Logical Name PREF_GPS_LIST_Priority_2
Definition The second preferred GPS positioning method.
Coding rules It contains a reference to a GPS method: 1 for MS Assisted A-GPS,2 for MS Based A-GPS, 3 for Conventional GPS.
Mandatory rules
Recommended rules The same GPS methods reference should not be used for differentpriorities.
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
None 1 3 2
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
18 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
19/928
2 LCS Telecom Parameters
2.1.8 (PREF_GPS_LIST_Priority_3) - (PREF_GPS_LIST_Priority_3)
HMI Name PREF_GPS_LIST_Priority_3Parameter Name
Logical Name PREF_GPS_LIST_Priority_3
Definition The third preferred GPS positioning method.
Coding rules It contains a reference to a GPS method: 1 for MS Assisted A-GPS,2 for MS Based A-GPS, 3 for Conventional GPS.
Mandatory rules
Recommended rules The same GPS methods reference should not be used for differentpriorities.
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
None 1 3 3
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 19 / 930
-
7/31/2019 Alcatel B8 Parameters
20/928
2 LCS Telecom Parameters
2.1.9 (SAGI_TCP_DATA_TIMEOUT) - (SAGI_TCP_DATA_TIMEOUT)
HMI Name SAGI_TCP_DATA_TIMEOUTParameter Name
Logical Name SAGI_TCP_DATA_TIMEOUT
Definition Parameter used in the context of supervision of SAGI based onTCP keep alive mechanism. This timer controls the retransmissiontimeout for the sending of the individual data segments.
Coding rules step size = 1 second
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
sec 4 10 5
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
20 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
21/928
2 LCS Telecom Parameters
2.1.10 (SAGI_TCP_KEEP_ALIVE_INTERVAL) -
(SAGI_TCP_KEEP_ALIVE_INTERVAL)
HMI Name SAGI_TCP_KEEP_ALIVE_INTERVALParameter Name
Logical Name SAGI_TCP_KEEP_ALIVE_INTERVAL
Definition Parameter used in the context of supervision of SAGI based on TCPkeep alive mechanism. This timer determines the interval separatingkeep alive retransmissions until a response is received. Once aresponse is received, the delay until the next keep alive transmissionis again controlled by the value of this timer. The connectionwill be aborted after the number of retransmissions specified bySAGI_TCP_MAX_DATA_RETRANS have gone unanswered.
Coding rules step size = 1 second
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
sec 4 10 5
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 21 / 930
-
7/31/2019 Alcatel B8 Parameters
22/928
2 LCS Telecom Parameters
2.1.11 (SAGI_TCP_MAX_DATA_RETRANS) -
(SAGI_TCP_MAX_DATA_RETRANS)
HMI Name SAGI_TCP_MAX_DATA_RETRANSParameter Name
Logical Name SAGI_TCP_MAX_DATA_RETRANS
Definition Parameter used in the context of supervision of SAGI based on TCPkeep alive mechanism. This parameter controls the number of timesTCP will retransmit an individual data segment before aborting theconnection. The retransmission timeout is given by the parameterSAGI_TCP_DATA_TIMEOUT.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
None 4 10 5
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
22 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
23/928
2 LCS Telecom Parameters
2.1.12 (T_SAGI_GUARD) - (T_SAGI_GUARD)
HMI Name T_SAGI_GUARDParameter Name
Logical Name T_SAGI_GUARD
Definition Timer to guard the response from the A-GPS server (on SAGI:interface with A-GPS server).
Coding rules step size = 1 sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
sec 1 300 60
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment The timer is meaningful in the MFS when EN_SAGI=1.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 23 / 930
-
7/31/2019 Alcatel B8 Parameters
24/928
2 LCS Telecom Parameters
2.2 Site (CAE)
2.2.1 (ARC_SIZE_FACTOR) - (ARC_SIZE_FACTOR)
HMI Name ARC_SIZE_FACTORParameter Name
Logical Name ARC_SIZE_FACTOR
Definition Factor used in the computation of the width in degree of the ellipsoidarc returned by the MFS when computing location estimate based onTA positionning method.
Coding rules step size = 0.1
Mandatory rules
Recommended rules
Category Site (CAE)
Type Number
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
None 1 1.5 1.2
Modifiable OMC Changes: None RNO Changes: BLS
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
24 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
25/928
2 LCS Telecom Parameters
2.2.2 (AZIMUTH) - (LCS_AZIMUTH)
HMI Name AZIMUTHParameter Name
Logical Name LCS_AZIMUTH
Definition Antenna direction orientation for the sector supporting the cell (usedby the MFS to compute location estimate based on TA positionningmethod).
Coding rules 0: 0 degree,..., 359: 359 degree, 360: omnidirectional cell
Mandatory rules
Recommended rules
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0 360 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit cell / LCS
External Comment 0 corresponds to the North orientation and is counted clockwise.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 25 / 930
-
7/31/2019 Alcatel B8 Parameters
26/928
2 LCS Telecom Parameters
2.2.3 (EN_CONV_GPS) - (EN_CONV_GPS)
HMI Name EN_CONV_GPSParameter Name
Logical Name EN_CONV_GPS
Definition Flag to enable or disable the positioning method Conventional GPS.
Coding rules 0 = disabled; 1 = enabled
Mandatory rules
Recommended rules
Category Site (CAE)
Type Flag
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit cell / LCS
External Comment The activation of this positioning method is meaningful whenEN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
26 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
27/928
2 LCS Telecom Parameters
2.2.4 (EN_LCS) - (EN_LCS (BSC))
HMI Name EN_LCSParameter Name
Logical Name EN_LCS (BSC)
Definition Enables/Disables the Location Services (LCS) in the BSS.
Coding rules 0 = disabled; 1 = enabled
Mandatory rules Equal to EN_LCS (MFS)
Recommended rules
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: BSS
Parameter Access Edit BSC / LCS
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 27 / 930
-
7/31/2019 Alcatel B8 Parameters
28/928
2 LCS Telecom Parameters
2.2.5 (EN_LCS) - (EN_LCS (MFS))
HMI Name EN_LCSParameter Name
Logical Name EN_LCS (MFS)
Definition Enables/Disables the Location Services (LCS) in the BSS.
Coding rules 0 = disabled; 1 = enabled
Mandatory rules Equal to EN_LCS (BSC)
Recommended rules
Category Site (CAE)
Type Flag
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit BSC / LCS
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
28 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
29/928
2 LCS Telecom Parameters
2.2.6 (EN_MS_ASSISTED_AGPS) - (EN_MS_ASSISTED_AGPS)
HMI Name EN_MS_ASSISTED_AGPSParameter Name
Logical Name EN_MS_ASSISTED_AGPS
Definition Flag to enable or disable the positioning method MS AssistedA-GPS.
Coding rules 0 = disabled; 1 = enabled
Mandatory rules
Recommended rules
Category Site (CAE)
Type Flag
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit cell / LCS
External Comment The activation of this positioning method is meaningful whenEN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 29 / 930
-
7/31/2019 Alcatel B8 Parameters
30/928
2 LCS Telecom Parameters
2.2.7 (EN_MS_BASED_AGPS) - (EN_MS_BASED_AGPS)
HMI Name EN_MS_BASED_AGPSParameter Name
Logical Name EN_MS_BASED_AGPS
Definition Flag to enable or disable the positioning method MS Based A-GPS.
Coding rules 0 = disabled; 1 = enabled
Mandatory rules
Recommended rules
Category Site (CAE)
Type Flag
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / LCS
External Comment The activation of this positioning method is meaningful whenEN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
30 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
31/928
2 LCS Telecom Parameters
2.2.8 (EN_SAGI) - (EN_SAGI)
HMI Name EN_SAGIParameter Name
Logical Name EN_SAGI
Definition Flag indicating whether SAGI (interface with the A-GPS server) isconfigured or not for this BSS.
Coding rules 0: disabled; 1: enabled
Mandatory rules
Recommended rules
Category Site (CAE)
Type Flag
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit BSC / LCS
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 31 / 930
-
7/31/2019 Alcatel B8 Parameters
32/928
2 LCS Telecom Parameters
2.2.9 (Geographical Coordinates) -
(GEOGRAPHICAL_COORDINATES_FLAG)
HMI Name Geographical CoordinatesParameter Name
Logical Name GEOGRAPHICAL_COORDINATES_FLAG
Definition Indicates whether latitude and longitude are significant or not.
Coding rules 0: not significant, 1: significant
Mandatory rules
Recommended rules
Category Site (CAE)
Type Flag
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / LCS
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
32 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
33/928
2 LCS Telecom Parameters
2.2.10 (HALFPWR_BEAM_WIDTH) - (HALFPWR_BEAM_WIDTH)
HMI Name HALFPWR_BEAM_WIDTHParameter Name
Logical Name HALFPWR_BEAM_WIDTH
Definition Antenna half power beam for the sector supporting the cell (used bythe MFS to compute location estimate based on TA positionningmethod).
Coding rules 0: half power beam width unknown, 1: 1 degree,..., 360: 360 degree(omnidirectional cell)
Mandatory rules
Recommended rules
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0 360 0
Modifiable OMC Changes: PRC & SC RNO Changes: LCS
Parameter Access Edit cell / LCS
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 33 / 930
-
7/31/2019 Alcatel B8 Parameters
34/928
2 LCS Telecom Parameters
2.2.11 (LATITUDE) - (LCS_LATITUDE)
HMI Name LATITUDEParameter Name
Logical Name LCS_LATITUDE
Definition Latitude of the BTS supporting the cell (used by the MFS to computelocation estimate based on TA positionning method).
Coding rules Sequence of:- number of degrees (from 0 to 90)- number of minutes (from 0 to 59)- number of fractional minutes (from 0 to 9999)- direction (boolean, true for South and false for North)
Mandatory rules
Recommended rules
Category Site (CAE)
Type List of numbers
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0,0,0,false 90,59,9999,true #
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / LCS
External Comment 1) 0 latitude corresponds to the Equator;2) The coding for OMC-R HMI is described in B8 BSS O&MParameters (3BK 11204 0284 DSZZA) parameter "LCS-Latitude".
Cell Type Dependent No
Nb of TRX Dependent No
34 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
35/928
2 LCS Telecom Parameters
2.2.12 (LONGITUDE) - (LCS_LONGITUDE)
HMI Name LONGITUDEParameter Name
Logical Name LCS_LONGITUDE
Definition Longitude of the BTS supporting the cell (used by the MFS tocompute location estimate based on TA positionning method).
Coding rules Sequence of:- number of degrees (from 0 to 180)- number of minutes (from 0 to 59)- number of fractional minutes (from 0 to 9999)- direction (boolean, true for West and false for East)
Mandatory rules
Recommended rules
Category Site (CAE)
Type List of numbers
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
None 0,0,0,false 180,59,9999,true #
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / LCS
External Comment 1) 0 longitude corresponds to the Greenwich Meridian;2) The coding for OMC-R HMI is described in B8 BSS O&MParameters (3BK 11204 0284 DSZZA), parameter "LCS-Longitude".
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 35 / 930
-
7/31/2019 Alcatel B8 Parameters
36/928
2 LCS Telecom Parameters
2.2.13 (MAX_RADIUS_FACTOR) - (MAX_RADIUS_FACTOR)
HMI Name MAX_RADIUS_FACTORParameter Name
Logical Name MAX_RADIUS_FACTOR
Definition Factor used in the computation of the maximum radius of the ellipsoidarc returned by the MFS when computing location estimate based onTA positionning method.
Coding rules step size = 0.05
Mandatory rules
Recommended rules
Category Site (CAE)
Type Number
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
None 0.5 1 0.6
Modifiable OMC Changes: None RNO Changes: BLS
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
36 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
37/928
2 LCS Telecom Parameters
2.2.14 (MIN_RADIUS_FACTOR) - (MIN_RADIUS_FACTOR)
HMI Name MIN_RADIUS_FACTORParameter Name
Logical Name MIN_RADIUS_FACTOR
Definition Factor used in the computation of the minimum radius of the ellipsoidarc returned by the MFS when computing location estimate based onTA positionning method.
Coding rules step size = 0.05
Mandatory rules
Recommended rules
Category Site (CAE)
Type Number
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
None 0.5 1 0.85
Modifiable OMC Changes: None RNO Changes: BLS
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 37 / 930
-
7/31/2019 Alcatel B8 Parameters
38/928
2 LCS Telecom Parameters
2.2.15 (T_LCS_Delay_Tolerant) - (T_LCS_Delay_Tolerant)
HMI Name T_LCS_Delay_TolerantParameter Name
Logical Name T_LCS_Delay_Tolerant
Definition SMLC timer to guard the calculation of the MS position (including theRRLP message exchange with the target MS) in case of a DelayTolerant Location Request.
Coding rules step size = 1 sec
Mandatory rules T_Location + T_Location_Longer > T_LCS_Delay_Tolerant >=T_LCS_Low_Delay
Recommended rules
Category Site (CAE)
Type Timer
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
sec 1 300 10
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit BSS / LCS
External Comment The timer is meaningful in the MFS when EN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
38 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
39/928
2 LCS Telecom Parameters
2.2.16 (T_LCS_Low_Delay) - (T_LCS_Low_Delay)
HMI Name T_LCS_Low_DelayParameter Name
Logical Name T_LCS_Low_Delay
Definition SMLC timer to guard the calculation of the MS position (includingthe RRLP message exchange with the target MS) in case of a LowDelay Location Request.
Coding rules step size = 0.1 sec
Mandatory rules T_Location + T_Location_Longer > T_LCS_Delay_Tolerant >=T_LCS_Low_Delay
Recommended rules
Category Site (CAE)
Type Timer
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
sec 0.1 180 3
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit BSS / LCS
External Comment The timer is meaningful in the MFS when EN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 39 / 930
-
7/31/2019 Alcatel B8 Parameters
40/928
2 LCS Telecom Parameters
2.2.17 (T_Loc_abort) - (T_Loc_abort)
HMI Name T_Loc_abortParameter Name
Logical Name T_Loc_abort
Definition BSC timer supervising the response from the SMLC in case ofLocation Abort.
Coding rules step size = 0.1 sec
Mandatory rules
Recommended rules T_Loc_abort < T_Location
Category Site (CAE)
Type Timer
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
sec 1 30 2
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit BSC / LCS
External Comment The timer is meaningful in the BSC when EN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
40 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
41/928
2 LCS Telecom Parameters
2.2.18 (T_Location) - (T_Location)
HMI Name T_LocationParameter Name
Logical Name T_Location
Definition BSC timer, on a per call basis, supervising the response from theSMLC in case of Location request, when no RRLP exchange istriggered with the MS.
Coding rules step size = 0.1 sec
Mandatory rules T_Location + T_Location_Longer > T_LCS_Delay_Tolerant >=T_LCS_Low_Delay
Recommended rules -
Category Site (CAE)
Type Timer
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
sec 1 300 15
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit BSC / LCS
External Comment The timer is meaningful in the BSC when EN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 41 / 930
-
7/31/2019 Alcatel B8 Parameters
42/928
2 LCS Telecom Parameters
2.2.19 (T_Location_Longer) - (T_Location_Longer)
HMI Name T_Location_LongerParameter Name
Logical Name T_Location_Longer
Definition BSC timer, on a per call basis, supervising the response from theSMLC in case of Location request, when a RRLP exchange istriggered with the MS.
Coding rules step size = 1 sec
Mandatory rules T_Location + T_Location_Longer > T_LCS_Delay_Tolerant >=T_LCS_Low_Delay
Recommended rules T_Location_Longer > T_Location
Category Site (CAE)
Type Timer
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
sec 1 300 30
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit BSC / LCS
External Comment The timer is meaningful in the BSC when EN_LCS=1, and replacesT_Location timer in case of Conventional GPS, MS Assisted A-GPSand MS Based A-GPS positioning methods.
Cell Type Dependent No
Nb of TRX Dependent No
42 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
43/928
2 LCS Telecom Parameters
2.2.20 (T_RRLP_Delay_Tolerant) - (T_RRLP_Delay_Tolerant)
HMI Name T_RRLP_Delay_TolerantParameter Name
Logical Name T_RRLP_Delay_Tolerant
Definition SMLC timer to guard the RRLP message exchange between theSMLC and the target MS, in case of a Delay Tolerant LocationRequest.
Coding rules step size = 1 sec
Mandatory rules T_LCS_Delay_Tolerant > T_RRLP_Delay_TolerantT_RRLP_Delay_Tolerant >= T_RRLP_Low_Delay
Recommended rules
Category Site (CAE)
Type Timer
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
sec 1 300 9
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit BSS / LCS
External Comment The timer is meaningful in the MFS when EN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 43 / 930
-
7/31/2019 Alcatel B8 Parameters
44/928
2 LCS Telecom Parameters
2.2.21 (T_RRLP_Low_Delay) - (T_RRLP_Low_Delay)
HMI Name T_RRLP_Low_DelayParameter Name
Logical Name T_RRLP_Low_Delay
Definition SMLC timer to guard the RRLP message exchange between theSMLC and the target MS, in case of a Low Delay Location Request.
Coding rules step size = 0.1 sec
Mandatory rules T_Low_Delay > T_RRLP_Low_DelayT_RRLP_Delay_Tolerant >= T_RRLP_Low_Delay
Recommended rules
Category Site (CAE)
Type Timer
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
sec 0.1 120 2
Modifiable OMC Changes: PRC & SC RNO Changes: BLS
Parameter Access Edit Cell / LCS
External Comment The timer is meaningful in the MFS when EN_LCS=1.
Cell Type Dependent No
Nb of TRX Dependent No
44 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
45/928
3 GSM Telecom Parameters
3 GSM Telecom Parameters
3BK 20824 AAAA PCZZA Ed.07 45 / 930
-
7/31/2019 Alcatel B8 Parameters
46/928
3 GSM Telecom Parameters
3.1 Network (CDE)
3.1.1 (ADDR_MON) - (ADDR_MON)
HMI Name ADDR_MONParameter Name
Logical Name ADDR_MON
Definition Time it takes to ADDR_TR to be reached to report an alarm. Ontimeout, the address error counter is reset.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 15
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
46 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
47/928
3 GSM Telecom Parameters
3.1.2 (ADDR_TR) - (ADDR_TR)
HMI Name ADDR_TRParameter Name
Logical Name ADDR_TR
Definition Address error threshold for alarm detection.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 255 60
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 47 / 930
-
7/31/2019 Alcatel B8 Parameters
48/928
3 GSM Telecom Parameters
3.1.3 (Autocleaning_Timer) - (T_AUTOCLEANING_MEAS_REP)
HMI Name Autocleaning_TimerParameter Name
Logical Name T_AUTOCLEANING_MEAS_REP
Definition Guard time for detection of SDCCH/TCH autocleaning procedure.
Coding rules step size = 1 sec
Mandatory rules
Recommended rules In micro cells, it is recommended to set N_BAD_SACCH so thatT_AUTOCLEANING_MEAS_REP > N_BAD_SACCH * 480ms + 30seconds if T_AUTOCLEANING_MEAS_REP 0.
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
sec 0 255 40
Modifiable OMC Changes: None RNO Changes: No
Parameter Access Edit BSC / Procedures / General timers and procedures
External Comment T_AUTOCLEANING_MEAS_REP = 0 inhibits the autocleaningprocedure.
Cell Type Dependent No
Nb of TRX Dependent No
48 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
49/928
3 GSM Telecom Parameters
3.1.4 (BF_HI_RX) - (BF_HI_RX)
HMI Name BF_HI_RXParameter Name
Logical Name BF_HI_RX
Definition Threshold on LAPD RX buffers occupancy for transition from normalto busy condition.
Coding rules
Mandatory rules
Recommended rules BF_HI_RX > BF_LO_RX
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 80
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 49 / 930
-
7/31/2019 Alcatel B8 Parameters
50/928
3 GSM Telecom Parameters
3.1.5 (BF_HI_TX) - (BF_HI_TX)
HMI Name BF_HI_TXParameter Name
Logical Name BF_HI_TX
Definition Threshold on LAPD TX buffers occupancy for transition from normalto busy condition.
Coding rules
Mandatory rules
Recommended rules BF_HI_TX > BF_LO_TX
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 30 16
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
50 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
51/928
3 GSM Telecom Parameters
3.1.6 (BF_LO_RX) - (BF_LO_RX)
HMI Name BF_LO_RXParameter Name
Logical Name BF_LO_RX
Definition Threshold on LAPD RX buffers occupancy for transition from busyto normal condition.
Coding rules
Mandatory rules
Recommended rules BF_LO_RX < BF_HI_RX
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 70
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 51 / 930
-
7/31/2019 Alcatel B8 Parameters
52/928
-
7/31/2019 Alcatel B8 Parameters
53/928
3 GSM Telecom Parameters
3.1.8 (CGI_REQUIRED) - (CGI_REQD)
HMI Name CGI_REQUIREDParameter Name
Logical Name CGI_REQD
Definition Controls format of cell identifications sent to the MSC.
Coding rules 0: CGI not used, 1: CGI used
Mandatory rules
Recommended rules Alcatel recommend to set the CGI_REQD parameter to 1 providedthat the MSC supports the CGI format. The CGI_REQD parametershall be set to 1 if the operator wants to allow inter-PLMN 2Gto 2G handovers. If this parameter needs to be changed, it isrecommended to change it during a migration phase to avoid anyadditional Telecom outage.
Category Network (CDE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 1 1
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit BSC / Interworking / MSC interworking
External Comment Depends on MSC Type. The value indicated here is forimplementation purposes.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 53 / 930
-
7/31/2019 Alcatel B8 Parameters
54/928
3 GSM Telecom Parameters
3.1.9 (COUNT_DECR) - (COUNT_DECR)
HMI Name COUNT_DECRParameter Name
Logical Name COUNT_DECR
Definition Stepsize by which the leaky bucket counter used during the reactionto TCU overload is decremented upon T_COUNT_I expiry.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 10 1
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
54 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
55/928
3 GSM Telecom Parameters
3.1.10 (COUNT_I_THRESHOLD) - (COUNT_I_THRESHOLD)
HMI Name COUNT_I_THRESHOLDParameter Name
Logical Name COUNT_I_THRESHOLD
Definition Leaky bucket counter threshold used to trigger defense actions uponTCU overload.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 50 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 55 / 930
-
7/31/2019 Alcatel B8 Parameters
56/928
3 GSM Telecom Parameters
3.1.11 (COUNT_INCR_1) - (COUNT_INCR_1)
HMI Name COUNT_INCR_1Parameter Name
Logical Name COUNT_INCR_1
Definition Stepsize by which the leaky bucket counter used during the reactionto TCU overload is incremented upon TCU overload level 1.
Coding rules
Mandatory rules
Recommended rules COUNT_INCR_1
-
7/31/2019 Alcatel B8 Parameters
57/928
3 GSM Telecom Parameters
3.1.12 (COUNT_INCR_2) - (COUNT_INCR_2)
HMI Name COUNT_INCR_2Parameter Name
Logical Name COUNT_INCR_2
Definition Stepsize by which the leaky bucket counter used during the reactionto TCU overload is incremented upon TCU overload level 2.
Coding rules
Mandatory rules
Recommended rules COUNT_INCR_2 >= COUNT_INCR_1
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 10 4
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 57 / 930
-
7/31/2019 Alcatel B8 Parameters
58/928
3 GSM Telecom Parameters
3.1.13 (CRC_MON) - (CRC_MON)
HMI Name CRC_MONParameter Name
Logical Name CRC_MON
Definition Time in which CRC_TR is to be reached to report an alarm. Ontimeout, the CRC error counter is reset.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 25.5 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
58 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
59/928
3 GSM Telecom Parameters
3.1.14 (CRC_TR) - (CRC_TR)
HMI Name CRC_TRParameter Name
Logical Name CRC_TR
Definition CRC error threshold for alarm detection.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 255 50
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 59 / 930
-
7/31/2019 Alcatel B8 Parameters
60/928
3 GSM Telecom Parameters
3.1.15 (EN_FR_IF_HR_PREF) - (EN_FR_IF_HR_PREF)
HMI Name EN_FR_IF_HR_PREFParameter Name
Logical Name EN_FR_IF_HR_PREF
Definition When set, this flag allows, when bugged MS asking for a "dual rate,half-rate preferred", to allocate a full rate channel.
Coding rules 0 : function disabled, 1 : function enabled
Mandatory rules
Recommended rules
Category Network (CDE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
60 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
61/928
3 GSM Telecom Parameters
3.1.16 (I_TX_LAPD) - (I_TX_LAPD)
HMI Name I_TX_LAPDParameter Name
Logical Name I_TX_LAPD
Definition Maximum LAPD transmission queue length.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 5 204 105
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 61 / 930
-
7/31/2019 Alcatel B8 Parameters
62/928
3 GSM Telecom Parameters
3.1.17 (LB_DECR) - (LB_DECR)
HMI Name LB_DECRParameter Name
Logical Name LB_DECR
Definition Stepsize by which a leaky bucket overload counter in the BSC isdecremented on T_LB_OV expiry.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 10 3
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
62 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
63/928
3 GSM Telecom Parameters
3.1.18 (LB_INCR) - (LB_INCR)
HMI Name LB_INCRParameter Name
Logical Name LB_INCR
Definition Stepsize by which a leaky bucket overload counter in the BSC isincremented each time an OVERLOAD is received from the FU.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 10 2
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 63 / 930
-
7/31/2019 Alcatel B8 Parameters
64/928
3 GSM Telecom Parameters
3.1.19 (MEAS_RES_DISCARDED_i [1]) - (MEAS_RES_DISCARDED_i [1])
HMI Name MEAS_RES_DISCARDED_i [1]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [1]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
64 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
65/928
3 GSM Telecom Parameters
3.1.20 (MEAS_RES_DISCARDED_i [10]) - (MEAS_RES_DISCARDED_i
[10])
HMI Name MEAS_RES_DISCARDED_i [10]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [10]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 65 / 930
-
7/31/2019 Alcatel B8 Parameters
66/928
3 GSM Telecom Parameters
3.1.21 (MEAS_RES_DISCARDED_i [2]) - (MEAS_RES_DISCARDED_i [2])
HMI Name MEAS_RES_DISCARDED_i [2]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [2]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 20
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
66 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
67/928
3 GSM Telecom Parameters
3.1.22 (MEAS_RES_DISCARDED_i [3]) - (MEAS_RES_DISCARDED_i [3])
HMI Name MEAS_RES_DISCARDED_i [3]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [3]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 30
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 67 / 930
-
7/31/2019 Alcatel B8 Parameters
68/928
3 GSM Telecom Parameters
3.1.23 (MEAS_RES_DISCARDED_i [3]) - (MEAS_RES_DISCARDED_i [4])
HMI Name MEAS_RES_DISCARDED_i [3]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [4]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 40
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
68 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
69/928
3 GSM Telecom Parameters
3.1.24 (MEAS_RES_DISCARDED_i [5]) - (MEAS_RES_DISCARDED_i [5])
HMI Name MEAS_RES_DISCARDED_i [5]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [5]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 69 / 930
-
7/31/2019 Alcatel B8 Parameters
70/928
-
7/31/2019 Alcatel B8 Parameters
71/928
3 GSM Telecom Parameters
3.1.26 (MEAS_RES_DISCARDED_i [7]) - (MEAS_RES_DISCARDED_i [7])
HMI Name MEAS_RES_DISCARDED_i [7]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [7]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 71 / 930
-
7/31/2019 Alcatel B8 Parameters
72/928
3 GSM Telecom Parameters
3.1.27 (MEAS_RES_DISCARDED_i [8]) - (MEAS_RES_DISCARDED_i [8])
HMI Name MEAS_RES_DISCARDED_i [8]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [8]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
72 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
73/928
3 GSM Telecom Parameters
3.1.28 (MEAS_RES_DISCARDED_i [9]) - (MEAS_RES_DISCARDED_i [9])
HMI Name MEAS_RES_DISCARDED_i [9]Parameter Name
Logical Name MEAS_RES_DISCARDED_i [9]
Definition Percentage of MEASUREMENT RESULT messages discarded bythe TCU at step I.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 73 / 930
-
7/31/2019 Alcatel B8 Parameters
74/928
3 GSM Telecom Parameters
3.1.29 (N200_RSL (BSC)) - (N200_RSL (BSC))
HMI Name N200_RSL (BSC)Parameter Name
Logical Name N200_RSL (BSC)
Definition Maximum number of retransmissions of a LAPD frame on a RSL.
Coding rules
Mandatory rules
Recommended rules N200_RSL (BSC) = N200_RSL (BTS) + 2
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 3 20 12
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment The value of this parameter is driven by the associated Abisconnection type,At migration time, it is set to 5sec for all Abis, if at least one Abis Lapdtimer is greater than 500msecIt can be changed indirectly from the OMC (through the change ofAbis connection type)
default Value: 12 for terrestrial link, value 5 for Abis via satellite
Cell Type Dependent No
Nb of TRX Dependent No
74 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
75/928
3 GSM Telecom Parameters
3.1.30 (NBLK) - (NBLK)
HMI Name NBLKParameter Name
Logical Name NBLK
Definition Maximum number of BLOCK messages that can be sent if the ACKfrom the MSC is not received.
Coding rules 255: infinite transmission
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 255 2
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 75 / 930
-
7/31/2019 Alcatel B8 Parameters
76/928
3 GSM Telecom Parameters
3.1.31 (NBR_STEPS_OVRL_1) - (NBR_STEPS_OVRL_1)
HMI Name NBR_STEPS_OVRL_1Parameter Name
Logical Name NBR_STEPS_OVRL_1
Definition Number of steps needed to reduce the load upon TCU overloadlevel 1.
Coding rules
Mandatory rules
Recommended rules NBR_STEPS_OVRL_1
-
7/31/2019 Alcatel B8 Parameters
77/928
3 GSM Telecom Parameters
3.1.32 (NBR_STEPS_OVRL_2) - (NBR_STEPS_OVRL_2)
HMI Name NBR_STEPS_OVRL_2Parameter Name
Logical Name NBR_STEPS_OVRL_2
Definition Number of steps to reduce the load upon TCU overload level 2.
Coding rules
Mandatory rules
Recommended rules NBR_STEPS_OVRL_2 >= NBR_STEPS_OVRL_1
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 10 2
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 77 / 930
-
7/31/2019 Alcatel B8 Parameters
78/928
3 GSM Telecom Parameters
3.1.33 (NUBLK) - (NUBLK)
HMI Name NUBLKParameter Name
Logical Name NUBLK
Definition Maximum number of UNBLOCK messages that are sent if the ACKfrom the MSC is not received.
Coding rules 255: infinite transmission
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 255 2
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
78 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
79/928
3 GSM Telecom Parameters
3.1.34 (PLMN_FREQUENCY_BANDS) -
(PLMN_FREQUENCY_BANDS(BSC))
HMI Name PLMN_FREQUENCY_BANDSParameter Name
Logical Name PLMN_FREQUENCY_BANDS(BSC)
Definition Frequency bands used in the whole PLMN.
Coding rules 0: GSM900 and DCS1800 bands1: GSM850 and DCS1800 bands2: GSM850 and DCS1900 bands3: GSM900 and DCS1900 bands4,...,255: for future useThis parameter shall be coded over 8 bits as a provision for futurefrequency band combinations.
Mandatory rules PLMN_FREQUENCY_BANDS(BSC) =PLMN_FREQUENCY_BANDS(MFS)
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 3 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment Within the same PLMN, the FREQUENCY_RANGE parameter of agiven cell can be selected among one of the following values:- PGSM (GSM900) or EGSM (GSM900) or DCS1800or PGSM-DCS1800 or EGSM-DCS1800 if thePLMN_FREQUENCY_BANDS is set to "GSM900 andDCS1800 bands",- GSM850 or DCS1800 if the PLMN_FREQUENCY_BAND is set toGSM850-DCS1800,- GSM850 or DCS1900 if the PLMN_FREQUENCY_BANDS is set to"GSM850 and DCS1900 bands",- PGSM (GSM900) or EGSM (GSM900) or DCS1900 if thePLMN_FREQUENCY_BANDS is set to "GSM900 and DCS1900bands.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 79 / 930
-
7/31/2019 Alcatel B8 Parameters
80/928
3 GSM Telecom Parameters
3.1.35 (PLMN_FREQUENCY_BANDS) -
(PLMN_FREQUENCY_BANDS(MFS))
HMI Name PLMN_FREQUENCY_BANDSParameter Name
Logical Name PLMN_FREQUENCY_BANDS(MFS)
Definition Frequency bands used in the whole PLMN.
Coding rules 0: GSM900 and DCS1800 bands1: GSM850 and DCS1800 bands2: GSM850 and DCS1900 bands3: GSM900 and DCS1900 bands4,...,255: for future useThis parameter shall be coded over 8 bits as a provision for futurefrequency band combinations.
Mandatory rules PLMN_FREQUENCY_BANDS(BSC) =PLMN_FREQUENCY_BANDS(MFS)
Recommended rules
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
None 0 3 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access Customer BUL file
External Comment Within the same PLMN, the FREQUENCY_RANGE parameter of agiven cell can be selected among one of the following values:- PGSM (GSM900) or EGSM (GSM900) or DCS1800or PGSM-DCS1800 or EGSM-DCS1800 if thePLMN_FREQUENCY_BANDS is set to "GSM900 andDCS1800 bands",- GSM850 or DCS1800 if the PLMN_FREQUENCY_BANDS is set toGSM850-DCS1800,- GSM850 or DCS1900 if the PLMN_FREQUENCY_BANDS is set to"GSM850 and DCS1900 bands",- PGSM (GSM900) or EGSM (GSM900) or DCS1900 if thePLMN_FREQUENCY_BANDS is set to "GSM900 and DCS1900bands".
Cell Type Dependent No
Nb of TRX Dependent No
80 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
81/928
3 GSM Telecom Parameters
3.1.36 (PROT_MON) - (PROT_MON)
HMI Name PROT_MONParameter Name
Logical Name PROT_MON
Definition Time in which PROT_TH is to be reached to report an alarm. Ontimeout, the protocol error counter is reset.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 81 / 930
-
7/31/2019 Alcatel B8 Parameters
82/928
3 GSM Telecom Parameters
3.1.37 (PROT_TH) - (PROT_TH)
HMI Name PROT_THParameter Name
Logical Name PROT_TH
Definition Protocol error threshold for alarm detection.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 1 255 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
82 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
83/928
3 GSM Telecom Parameters
3.1.38 (SDCCH_AVG_PERIOD) - (SDCCH_AVG_PERIOD)
HMI Name SDCCH_AVG_PERIODParameter Name
Logical Name SDCCH_AVG_PERIOD
Definition Period used to average the processor occupancy measurements.
Coding rules 8 bits, step size=1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 16 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 83 / 930
-
7/31/2019 Alcatel B8 Parameters
84/928
3 GSM Telecom Parameters
3.1.39 (SDCCH_HIGH_DELAY) - (SDCCH_HIGH_DELAY)
HMI Name SDCCH_HIGH_DELAYParameter Name
Logical Name SDCCH_HIGH_DELAY
Definition Delay added to SDCCH internal release when TCU processor loadis high.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 10 2
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
84 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
85/928
3 GSM Telecom Parameters
3.1.40 (SDCCH_LOW_DELAY) - (SDCCH_LOW_DELAY)
HMI Name SDCCH_LOW_DELAYParameter Name
Logical Name SDCCH_LOW_DELAY
Definition Delay added to SDCCH internal release when TCU processor load islow.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 10 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 85 / 930
-
7/31/2019 Alcatel B8 Parameters
86/928
3 GSM Telecom Parameters
3.1.41 (SMS_INHIBIT) - (SMS_INHIBIT)
HMI Name SMS_INHIBITParameter Name
Logical Name SMS_INHIBIT
Definition This flag enables/disables SMS support.
Coding rules 0: SMS permitted, 1: SMS inhibited
Mandatory rules
Recommended rules
Category Network (CDE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 1 0
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
86 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
87/928
3 GSM Telecom Parameters
3.1.42 (SSF) - (SSF)
HMI Name SSFParameter Name
Logical Name SSF
Definition This parameter inditifies the numbering plan of the Signalling PointCode.
Coding rules coded over 4 bits.only values 0, 4, 8 and 12 are defined : Value =0, international network; Value = 4, Spare, reserved for internationaluse; Value = 8, National network; Value = 12 , Reserved for nationaluse
Mandatory rules
Recommended rules
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 12 12
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment SSF (Sub-Service Field) is composed of 4 bits: 2bits for NetworkIndicator and 2 spare bits.
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 87 / 930
-
7/31/2019 Alcatel B8 Parameters
88/928
3 GSM Telecom Parameters
3.1.43 (T_BTS_EST_CNF) - (T_BTS_EST_CNF)
HMI Name T_BTS_EST_CNFParameter Name
Logical Name T_BTS_EST_CNF
Definition Supervision of the SAPI 3 Establishment procedure.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 4
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
88 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
89/928
3 GSM Telecom Parameters
3.1.44 (T_BTS_RLS_CNF) - (T_BTS_RLS_CNF)
HMI Name T_BTS_RLS_CNFParameter Name
Logical Name T_BTS_RLS_CNF
Definition Supervision of the SAPI 3 Release procedure.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 4
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 89 / 930
-
7/31/2019 Alcatel B8 Parameters
90/928
3 GSM Telecom Parameters
3.1.45 (T_CBC_READY) - (T_CBC_READY)
HMI Name T_CBC_READYParameter Name
Logical Name T_CBC_READY
Definition Defines the maximum period during which the BSC tries to connectto the CBC before issueing an alarm or returning CMD-MODE Resp.
Coding rules step size: 1 sec
Mandatory rules
Recommended rules T_CBC_READY > 8 * T_CONNECT
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 10 600 300
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
90 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
91/928
3 GSM Telecom Parameters
3.1.46 (T_COUNT_I) - (T_COUNT_I)
HMI Name T_COUNT_IParameter Name
Logical Name T_COUNT_I
Definition Supervision of the leaky bucket counter used during the reaction toTCU overload.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 50 12
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 91 / 930
-
7/31/2019 Alcatel B8 Parameters
92/928
3 GSM Telecom Parameters
3.1.47 (T_i) - (T_i)
HMI Name T_iParameter Name
Logical Name T_i
Definition Duration of SSP or SPI condition that triggers an Internal Resetprocedure.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 10 3
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit BSC / Interworking / MSC interworking
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
92 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
93/928
3 GSM Telecom Parameters
3.1.48 (T_LB_OV) - (T_LB_OV)
HMI Name T_LB_OVParameter Name
Logical Name T_LB_OV
Definition Supervision of the leaky bucket counter used during the reactionto FU overload.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0.1 25.5 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 93 / 930
-
7/31/2019 Alcatel B8 Parameters
94/928
3 GSM Telecom Parameters
3.1.49 (T_OVL_MSC) - (T_OVL_MSC)
HMI Name T_OVL_MSCParameter Name
Logical Name T_OVL_MSC
Definition Minimum delay between two consecutive OVERLOAD messagessent to the MSC.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0.1 6553.5 20
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
94 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
95/928
3 GSM Telecom Parameters
3.1.50 (T_RCR_ACK) - (T_RCR_ACK)
HMI Name T_RCR_ACKParameter Name
Logical Name T_RCR_ACK
Definition Supervision of the RF Channel Release procedure.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 5
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 95 / 930
-
7/31/2019 Alcatel B8 Parameters
96/928
3 GSM Telecom Parameters
3.1.51 (T_SMSCB_RESP) - (T_SMSCB_RESP)
HMI Name T_SMSCB_RESPParameter Name
Logical Name T_SMSCB_RESP
Definition Maximum waiting time to get a response from the BTS to a primitive.
Coding rules step size = 1 sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 1 10 2
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
96 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
97/928
-
7/31/2019 Alcatel B8 Parameters
98/928
3 GSM Telecom Parameters
3.1.53 (T2_0858) - (T2_0858)
HMI Name T2_0858Parameter Name
Logical Name T2_0858
Definition Minimum delay between debarring of an access class, in the casewhere the BTS stops sending OVERLOAD.
Coding rules step size = 0.1sec
Mandatory rules T2_0858 > T1_0858
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 3 6553.5 50
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
98 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
99/928
3 GSM Telecom Parameters
3.1.54 (T9101) - (T9101)
HMI Name T9101Parameter Name
Logical Name T9101
Definition Supervision of the SCCP connection release procedure.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 99 / 930
-
7/31/2019 Alcatel B8 Parameters
100/928
3 GSM Telecom Parameters
3.1.55 (T9103) - (T9103)
HMI Name T9103Parameter Name
Logical Name T9103
Definition Supervision of the Channel Activation procedure.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 3
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
100 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
101/928
3 GSM Telecom Parameters
3.1.56 (T9108) - (T9108)
HMI Name T9108Parameter Name
Logical Name T9108
Definition Supervision of the Physical Context procedure.
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules
Category Network (CDE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0 6553.5 3
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 101 / 930
-
7/31/2019 Alcatel B8 Parameters
102/928
3 GSM Telecom Parameters
3.1.57 (T9110) - (T9110)
HMI Name T9110Parameter Name
Logical Name T9110
Definition Guards the response of the MSC when no resources areallocated to the SCCP connection (started on the receptionof CONN_IND(SCCP_CON_REQ) not carrying a HANDOVERREQUEST message and stopped when a HANDOVER REQUESTmessage is received on the same SCCP connection as theSCCP_CON_REQ message). Guards also the response of the MSCwhen a HANDOVER FAILURE or ASSIGNMENT FAILURE messagehas been sent (stopped when a HANDOVER REQUEST or CLEARCOMMAND message is received).
Coding rules step size = 0.1sec
Mandatory rules
Recommended rules T9110
-
7/31/2019 Alcatel B8 Parameters
103/928
3 GSM Telecom Parameters
3.1.58 (TCH_INFO_PERIOD) - (TCH_INFO_PERIOD)
HMI Name TCH_INFO_PERIODParameter Name
Logical Name TCH_INFO_PERIOD
Definition Periodicity of TCH usage information update in the BSC.
Coding rules stepsize = 0.1
Mandatory rules
Recommended rules T_PDCH_PREEMPTION
-
7/31/2019 Alcatel B8 Parameters
104/928
3 GSM Telecom Parameters
3.1.59 (THR_LB_OV) - (THR_LB_OV)
HMI Name THR_LB_OVParameter Name
Logical Name THR_LB_OV
Definition Counter threshold for triggering global defence actions in the BSCupon FU overload.
Coding rules
Mandatory rules
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
None 0 50 10
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
104 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
105/928
3 GSM Telecom Parameters
3.1.60 (THRESHOLD_1_0) - (THRESHOLD_1_0)
HMI Name THRESHOLD_1_0Parameter Name
Logical Name THRESHOLD_1_0
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 0.
Coding rules
Mandatory rules THRESHOLD_1_0 >= THRESHOLD_2_0
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 25
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 105 / 930
-
7/31/2019 Alcatel B8 Parameters
106/928
3 GSM Telecom Parameters
3.1.61 (THRESHOLD_1_1) - (THRESHOLD_1_1)
HMI Name THRESHOLD_1_1Parameter Name
Logical Name THRESHOLD_1_1
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 1.
Coding rules
Mandatory rules THRESHOLD_1_1 >= THRESHOLD_2_1
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 28
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
106 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
107/928
3 GSM Telecom Parameters
3.1.62 (THRESHOLD_1_10) - (THRESHOLD_1_10)
HMI Name THRESHOLD_1_10Parameter Name
Logical Name THRESHOLD_1_10
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 10.
Coding rules
Mandatory rules THRESHOLD_1_10 >= THRESHOLD_2_10
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 55
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 107 / 930
-
7/31/2019 Alcatel B8 Parameters
108/928
3 GSM Telecom Parameters
3.1.63 (THRESHOLD_1_2) - (THRESHOLD_1_2)
HMI Name THRESHOLD_1_2Parameter Name
Logical Name THRESHOLD_1_2
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 2.
Coding rules
Mandatory rules THRESHOLD_1_2 >= THRESHOLD_2_2
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 31
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
108 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
109/928
3 GSM Telecom Parameters
3.1.64 (THRESHOLD_1_3) - (THRESHOLD_1_3)
HMI Name THRESHOLD_1_3Parameter Name
Logical Name THRESHOLD_1_3
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 3.
Coding rules
Mandatory rules THRESHOLD_1_3 >= THRESHOLD_2_3
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 34
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 109 / 930
-
7/31/2019 Alcatel B8 Parameters
110/928
3 GSM Telecom Parameters
3.1.65 (THRESHOLD_1_4) - (THRESHOLD_1_4)
HMI Name THRESHOLD_1_4Parameter Name
Logical Name THRESHOLD_1_4
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 4.
Coding rules
Mandatory rules THRESHOLD_1_4 >= THRESHOLD_2_4
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 37
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
110 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
111/928
3 GSM Telecom Parameters
3.1.66 (THRESHOLD_1_5) - (THRESHOLD_1_5)
HMI Name THRESHOLD_1_5Parameter Name
Logical Name THRESHOLD_1_5
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 5.
Coding rules
Mandatory rules THRESHOLD_1_5 >= THRESHOLD_2_5
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 40
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
3BK 20824 AAAA PCZZA Ed.07 111 / 930
-
7/31/2019 Alcatel B8 Parameters
112/928
3 GSM Telecom Parameters
3.1.67 (THRESHOLD_1_6) - (THRESHOLD_1_6)
HMI Name THRESHOLD_1_6Parameter Name
Logical Name THRESHOLD_1_6
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 6.
Coding rules
Mandatory rules THRESHOLD_1_6 >= THRESHOLD_2_6
Recommended rules
Category Network (CDE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
% 0 100 43
Modifiable OMC Changes: None RNO Changes: No
Parameter Access
External Comment
Cell Type Dependent No
Nb of TRX Dependent No
112 / 930 3BK 20824 AAAA PCZZA Ed.07
-
7/31/2019 Alcatel B8 Parameters
113/928
3 GSM Telecom Parameters
3.1.68 (THRESHOLD_1_7) - (THRESHOLD_1_7)
HMI Name THRESHOLD_1_7Parameter Name
Logical Name THRESHOLD_1_7
Definition Free buffer thresholds separating "no overload" condition and"overload level 1" condition when pointer P points at position 7.