alamo capri 2360 amplifier schematic
DESCRIPTION
schematic diagramTRANSCRIPT
-
mattText Box22K (TYP-3)(~20K MEASURED)
mattText Box680pf disc
mattRectangle
mattRectangle
mattPolygonal Line
mattRectangle
mattPolygonal Line
mattText Box.005MFD 600V
mattText Box.05MFD 400V
mattText Box2.2M
mattText Box470K
mattText Box150
mattText Box20 MFD 25V
mattText Box.005MFD 600V
mattText Box2.2M
mattText BoxTONE 500K (365K Measured)
mattText BoxVOL 1M
mattText Box.005MFD 600V
mattText Box.005MFD 600V
mattText Box80MFD 150V
mattText Box80MFD (2x40 parallel) 150V
mattText Box10K
mattText Box12AU6
mattText Box50C5
mattText Box35W4
mattText Box35W4
mattText Box50C5
mattText Box12AU6
mattText Box~2500 to 3000 ohm
mattText Box 8ohm
mattText Box8" speakermarked V75E-51BE1045918 340stamped 38
mattText Box~98 VAC
mattText BoxPLATE ~140 VOLTS
mattText Box110VAC ~40W
mattText BoxWarning - Add a line fuse & replace power cord with ground to chassis for safety!
mattText BoxTHIS CIRCUIT IS MARKED UP TO SHOW ORIGINAL WIRING FOR A1963 ALAMO CAPRI. POWER OUTPUT IS ABOUT 2 to 3 WATTS.
mattRectangle
mattRectangle
mattText BoxTHIS AMP HAS EARLY BREAK-UP & FAT BLUES TONE. NICE FOR PRACTICE OR RECORDING.
mattText BoxNOTE: ORIGINAL TUBES ARE RCA. ALL RESISTORS 1/2 WATT. THE 150 OHM RESISTOR AT THE FINAL CATHODE SHOWS SIGNS OF OVERHEATING AND SHOULD PROBABLY BE UPGRADED TO 1 WATT. THE ORIGINAL FILTER CAPS (20,40,40,80) ARE A COMBO UNIT WITH COMMON GROUND. THE ORIGINAL 600V CAPS ARE AMERICAN RADIONIC CERACAPS, THE 400V CAP IS MARKED SARGAMO.