akron hardware product catalog version 3 · pdf filesargent sargent sargent sargent sargent...

SA

RG

EN

T S

AR

GE

NT

SA

RG

EN

T S

AR

GE

NT

SA

RG

EN

T

Visit us on the web at www.akronhardware.com

1-800-321-9602Fax 1-800-328-6070

Length under Cylinder Head

Cylinder No. 41 42

Bright Dim. X 1-1/8" 1-1/4"(29mm) (32mm)

SA

RG

EN

T

Contact us Toll Free at 1-800-321-9602 Fax 1-800-328-6070

Cylinders and Components2

40 Series Mortise Cylinder• Cylinder: Solid brass, 1-5/32" (29mm) diameter.• Cap: Brass, bronze or stainless steel.• Furnished standard with No. 97 rosette and com-

pression spring.• 6 pin standard, for 7 pin specify “7 pin”.• No. 41 cylinder not available in 7 pin.

34 Series Rim Type Cylinder• 27/32" (21mm) screw pattern for through-bolted

SARGENT exit devices.• Cylinder: Solid brass.

• Cap: Brass, bronze or stainless steel.• Furnished standard with No. 97 rosette

and compression spring, “break-off”screws and back plate.

• 6 pin standard, for 7 pin specify “7 pin”.(Factory order only).

• Horizontal tail piece only.

No. of Pins Door Thickness Dim. A (Min.) Dim. B (Min.)

6 2-3/8" to 3-1/4" (60mm to 82mm) 1-1/16" (27mm) 2-3/8" (60mm)

7* 2-1/2" to 3-1/2" (64mm to 89mm) 1-7/32" (31mm) 2-3/8" (60mm)

*Factory order only.

6300 Removable Core Cylinders• SARGENT Removable Core Cylinders and Master Key

Systems are available for a quick change of cylin-ders for increased security. It is unnecessary toremove the lock from a door to rekey the opening.

• Special “control” key is used to release a lockingcam allowing immediate removal of the core.

70- Prefix Disposable Plastic Construction Core For SFIC• Used for those doors that do not require key locking

during the construction period.• Operate with coin or flat screw driver.• Two piece design allows for easy installation.


SA

RG

EN

TCylinders and Components

3

Key BlanksNote: Master blanks are available from stock in the fol-lowing keyways: 6270HDH, HM, HN, LM, LN, RD, RDH,RN

How to Order Sargent Cylinders

TYPE LENGTH CAM PINS KWY. FINISH

41 MTSE. 1-1/8" 13-0660 6 SEE US342 MTSE. 1-1/4" 13-0512 CHART US10

34 RIM 13-0542 AT US10B13-3266 RIGHT US2613-2194 US26D13-313013-345713-3456

6300

• Denotes available interchangeable keyways.

Unless otherwise specified, cylinders will be furnished "1" bitted x 2 blankkeys. “Keyed Random” cylinders are available in the “LA” keyway only at noextra charge.

Keyways Available

HA• RA• LA• CA•HB• RB• LB• CB•HC• RC• LC• CC•HE• RE• LE• CE•HF• RF• LF• CF•HG• RG• LG• CG•HJ• RJ• LJ• CJ•HK• RK• LK• CK•HL• RL• LL• CL•

S•

NS-6275 6 pin key blanksNS-6270RN 6 pin Master key blanksNS-275 5 pin key blanksNS-6270 HDH key blanks

SA

RG

EN

T


4 11 Line Cylindrical Lever Locks

• True interlocking between the cast/ machined stainless steel lockbody and latchbolt.Provides unequalled strength and durability.

• 10 Year limited warranty. No service required to maintain warranty.• Fits both 160 & 161 door preps. No thru bolts required.• Fewer parts for easier installation.• Only 45 degrees of lever rotation required to retract latchbolt.• 18 functions. Many functions are easily field changeable.• 4 Solid ADA lever designs and 3 roses available to cover a wide variety of door preps

and design requirements.• Simple cylinder removal. Easy change outs.• The only cylindrical lock on the market available with security lever catch feature for

high vandalism application.

The SARGENT T-Zone* sets a higher standard for Grade1 bored-in locks. The unique, T-Zone construction pro-vides unequalled strength and durability for the mostdemanding applications such as schools and hospitals.This is accomplished by true interlocking between thelockbody and the latchbolt.Specify the SARGENT T-Zone when you need the ulti-mate in strength and durability in a bored-in lock.

Features Include:

Available Finishesfrom Stock

See page 11 foravailable finishes.


SA

RG

EN

T511 Line Cylindrical

Lever Lock Functions

11G04• Guardbolt deadlocks latchbolt.• Latchbolt by lever inside or key outside.• Outside lever rigid at all times.• ANSI F86

11G05• Guardbolt deadlocks latchbolt.• Latchbolt by either lever unless outside lever is locked by push/turn button in inside lever.• Turn button must be released manually.• Key only retracts latchbolt when outside lever is locked push button.• ANSI F81

11U15• Latchbolt by either lever.• ANSI F75

11G37• Guardbolt deadlocks latchbolt.• Latchbolt by either lever unless outside lever is locked by key.• Key in outside lever locks or unlocks outside lever.• Inside lever always operative.• ANSI F84

11U65• Latchbolt by either lever unless outside lever is locked by push button in inside lever.• Turning inside lever or closing door releases button.• Emergency button in outside lever unlocks, with use of a blade screw driver in outside lever

and releases inside button.• Emergency key supplied only when ordered separately (14-0057).• ANSI F76

Shaded lever indicates it is rigid at all times.

Call our Sales department - toll free - for current pricing on all SARGENT products

SA

RG

EN

T


6 11 Line Cylindrical Lever LockTrim Designs

LL

OL Design• Rose: O – Wrought• Lever: L – Cast

LJ Design• Rose: L – Wrought• Lever: J – Cast

LB

LP OB

OJ OP

LJ

OL

“L” Rose (3-1/2” diameter)Order 11-2446 x finish


SA

RG

EN

T710, 7, 6500 Line

Cylindrical Lever Locks

10 Line Lever LockThe 10 Line is the standard for institutional applicationssuch as medical, educational and municipal facilities.• Cycle Test: Exceeds 5 times A156.2 Grade 1 require-

ments.• Abusive Locked Lever Torque- without entry gained:

Exceeds 1.5 times A156.2 Grade 1 requirements.• 7 Year limited warranty – no service required to

maintain warranty.• Fits a variety of door preparations with adaptable

through-bolt positioning.

7 Line Lever LockA key-in-lever lock designed for standard duty commer-cial exterior and interior doors in medical clinics, offices,public buildings, hotel/motel and government facilities.• Fits both 160 & 161 door preps. Internal through-

bolts supply through-bolts strength and stabilitywithout requiring additional door preparation.

• Cycle Test: Exceeds 2 times ANSI/BHMA A156.2Grade 2 requirements to maintain warranty for cycletesting.

• 3 Year limited warranty. No service required.• Non-handed design for ease of installation and effi-

cient warehousing – with standard lever designs.

6500 Lever LockA standard duty key-in-lever lock designed to exceed therequirements of ANSI A156.2, Series 4000 and Grade 2.

Available Finishes from Stock

See page 11 for available finishes.

SA

RG

EN

T


8 10, 7, 6500 LineLever Lock Functions

10G04 7G04 65G04• Deadlocking latch.• Latch by lever inside or key outside.• Outside lever rigid at all times.• ANSI F86

10G05 7G05 65G05• Deadlocking latch.• Latch by either lever unless outside lever is locked by push/turn button in inside lever.• Push button released by key outside or lever inside.• Turn button must be released manually.• Key retracts latch when outside lever is locked.• ANSI F81

10U15 7U15 65U15• Latch by either lever.• ANSI F75

16 Classroom Security, 10U16 7U16 65U16• Deadlocking latch• Latch by either lever unless outside lever is locked by key in inside lever• Key in outside lever retracts latch when outside lever is locked• Inside lever always operative• ANSI F88

17 Utility, Asylum or Institutional10U17 • Deadlocking latch• Both levers rigid at all times• Latch by key either side• Use only on rooms with more than one exit• ANSI F87

24 Entrance or Office10U24 • Deadlocking latch• Latch by either lever unless outside lever is locked by push button in inside lever• Push button released by key or turning inside lever• Closing door does not unlock outside lever or release button• Key in outside lever retracts latch when outside lever is locked and releases inside push button• ANSI F82

30 Communicating10G30 • Deadlocking latch• Latch by either lever• Key in either lever locks or unlocks its own lever only• Use only on rooms with more than one exit• ANSI F80


SA

RG

EN

T910, 7, 6500 Line

Lever Lock Functions

10G37 7G37 65G37• Deadlocking latch.• Latch by either lever unless outside lever is locked by key.• Key in outside lever locks or unlocks outside lever.• Inside lever always operative.• ANSI F84

10U65 7U65 65U65• Latch by either lever unless outside lever is locked by push button in inside lever.• Turning inside lever or closing door releases button.• Emergency button in outside lever unlocks, with use of a blade screwdriver outside

lever and releases inside button.• Bathroom key supplied only when ordered separately (Part #14-0300).• ANSI F76

7U93 65U93• For wood or custom hollow metal doors.• Lever and rose attached by three surface applied screws.

65U94• For wood or custom hollow metal doors.• Lever and rose both sides through-bolted and three surface applied screws each side.



54 Corridor, Dormitory 10G54 • Deadlocking latch• Latch by either lever unless outside lever is locked by push button inside or key outside• Rotating inside lever or closing door releases inside button only, but does not unlock

the outside lever if locked by key• Key outside locks or unlocks outside lever and also retracts latchbolt when locked• ANSI F90

70 Electromechanical (Fail Safe)10U70 • Power off, unlocks outside lever• Deadlocking latch• Key retracts latch• Inside lever always allows egress• Voltage requirements: 12VDC or 24VDC Regulated; voltage must be specified on order

71 Electro mechanical (Fail Secure) 10U71 • Power off, locks outside lever• Deadlocking latch• Key retracts latch• Inside lever always allows egress• Voltage requirements: 12VDC or 24VDC Regulated; voltage must be specified on order

SA

RG

EN

T


10 10, 7, 6500 Line Lever Lock

Trim Designs

LB Design• Rose: L – Wrought • Lever: B – Cast

LJ Design• Rose: L – Wrought • Lever: J – Cast

LL Design• Rose: L – Wrought • Lever: L – Cast

LP Design• Rose: L – Wrought • Lever: P – Cast

KL Design (6500 only)• Rose: K – Wrought • Lever: L – Cast


SA

RG

EN

T1

1

How to Order Cylindrical Lever Sets

PREFIX LINE LATCH FUNCT. ROSE LEVER FINISH CYL. KWY.

20 11 U K L US3 LC SEE25 10 G L B US10 PAGE SAR-328 7 O J US10B70 6500 P US26

US26D

Unless otherwise specified, locks will be furnished standard forRH, 1-3/4" door, 2-3/4" backset, ANSI 4-7/8" strike, “LA” key-way cylinders x keyed random.

LB • • • • •LJ •LL • • • • •LP •

OB • • • • •OJ •OL • • • • •OP •

TRIM

DES

IGN

US3 US10

US10B

US26

US26D

FINISHES

OPTIONS (Prefix)Grade

11 Line 10 LineOne One

7 Line 6500 LineTwo TwoDoor Thickness (STD.)

11 Line 10 Line1-3/4" x 2" 1-3/4" x 2"

7 Line 6500 Line1-3/8" x 1-3/4" 1-3/8" x 1-3/4"

2-3/8" Backset (20)3-3/4" Backset (23)

5" Backset (25)ANSI Strike (28)Curved Lip StrikeLess Cylinder (LC)

Removable Core/Plastic Insert (60)Removable Core/with Core (63)

Small Format I/C (70)(Factory order only)

11 Line

LB • • • • •LJ • • • • •LL • • • • •LP • • • • •

LB • • •LL • • • •LP • •

KL • • • • •

TRIM

DES

IGN

US3 US10

US10B

US26

US26D

FINISHES

10 Line

10 Line

6500 Line

Cylindrical Leversets

040515161724303754657071779394

SA

RG

EN

T


12 8 Line Cylindrical Knob Locks

The SARGENT 8 line sets a higher standard for Grade 1bored-in locks. The unique, 8 line construction providesunequaled strength and durability for the mostdemanding applications. This is accomplished by trueinterlocking between the lockbody and the latch.Specify the SARGENT 8/9 line when you need the ulti-mate in strength and durability in a bored knob lock.

• Heavy duty T-Zone construction with interlocking latch and aligning tubes.• Lockbody fits doors from 1-3/8" (35mm) to 1-3/4" (44mm) thick standard.• Latches are reversible, self-adjusting to door bevel and available in 3 standard backsets.• Accepts SARGENT standard, high security and removable core cylinders.• SARGuard™ permanent silver-based antimicrobial coating. (Factory order only).• Accurate alignment, smooth operation and reversibility of the lock without disassembly

of knob and cylinder.• Versatile design to satisfy door requirements, making installation easy for new construc-

tion, as well as, retrofits and renovations.• Design accommodates common door preps and satisfies all door handing.• Maintain and expand master keying systems’ versatility for multiple

levels of security.• Handles virtually all interior and exterior applications.

Features Include:




SA

RG

EN

T1

36 Line Cylindrical Knob Locks

• Lockbody fits doors from 1-3/8" (35mm) to 1-3/4" (44mm) thick.• Latches are available in 3 standard backsets.• SARGuard™ permanent silver-based antimicrobial coating.• Accepts SARGENT standard, high security and removable core cylinders.• Installs with just two lockbody screws for easy installation and maintenance.• Non-handed or field reversible (except Removable Core).• Multiple latches and strike options available including radius/round applications.• Wide variety of functions and prefixes.• SL lever design meets national ADA handicapped requirements.• Quality finishes with split finishes optional.

The 6 Line is a highly styled standard duty lock lineincorporating a broad spectrum of functions, designsand finishes built to conform to ANSI/BHMA 156.2Series 4000 Grade 2. It is ideally suited for fine homes,apartments, hotels and commercial buildings.The 6 Line Locks are made to last, boast many qualityfeatures and are completely reversible.

Features Include:



SA

RG

EN

T


14 8, 6 Line Cylindrical Knob

Lock Functions

6G04 8G04• Deadlocking latch.• Latch retracted by knob inside or key outside.• Outside knob rigid at all times.• ANSI F86

6G05 8G05• Deadlocking latch.• Latch retracted by either knob unless outside knob is locked by turn button in

inside knob.• Turn button must be released manually.• Key retracts latch when outside knob is locked.• ANSI F81

6U15 8U15• Latch retracted by either knob.• ANSI F75

6G37 8G37• Deadlocking latch.• Latch retracted by either knob unless outside knob is locked by key.• Key in outside knob locks or unlocks outside knob.• ANSI F84

6U65 8U65• Latch retracted by either knob unless outside knob is locked by push button in

inside knob.• Turning inside knob or closing door releases button.• Emergency key or flat blade screwdriver in the emergency button releases the

inside button and unlocks the outside knob.• Emergency key supplied only when ordered separately (14-0300).• ANSI F76

Shaded knob indicates it is rigid at all times.


SA

RG

EN

T1

58, 6 Line Cylindrical KnobTrim Designs

8 Line – OB Design• Rose: O – Heavy Wrought• Knob: B – Heavy Wrought

6 Line – OB Design• Rose: O – Wrought• Knob: B – Wrought

How to Order Cylindrical Knob Sets

PREFIX LINE LATCH FUNCTION ROSE FINISH CYL. KWY.

20 6 U 04 O US3 LC SEE24 8 G 05 US10 PAGE SAR-325 15 US10B28 37 US26D

65

Unless otherwise specified, locks will be furnished standard forRH, 1-3/4" door, 2-3/4" backset, ANSI 4-7/8" strike, “LA” key-way cylinders x keyed random.

Grade8 Line 6 LineOne TwoDoor Thickness (STD.)

8 Line 6 Line1-3/8" x 1-3/4" 1-3/8" x 1-3/4"

2-3/8" Backset (20)3-3/4" Backset (23)

5" Backset (25)ANSI Strike (28)Curved Lip StrikeLess Cylinder (LC)

OPTIONS (Prefix)

OB • • •

OB • • • •

TRIM

DES

IGN

US3 US10

US10B

US26D

FINISHES

8 Line

6 Line

SA

RG

EN

T


16 7800 / 8200 Series Mortise Locksets



SARGENT Mortise Locks are designed and construct-ed with high quality components to provide maxi-mum security, performance and durability. Theselocks represent over a century of innovation andexperience in manufacturing hardware and are theindustry’s benchmark for mortise locks: Strong –Durable – Flexible – Innovative and Secure.

• Exceeds ANSI A156.13, Series 1000, Operational Grade 1 and Security Grade 1 with allstandard trims.

• 12 gauge (.109) steel case and cap.• Stainless steel hubs available.• One-piece hardened stainless steel deadbolt with 1” (25mm) projection.• Exceeds 6 times the ANSI/BHMA A156.13 Grade 1 standard for cycle testing!• Fast and easy installation. Lock is easily re-handed without removing parts or opening

the lock case.• Easy operation. Only 30º of lever rotation required to retract latchbolt.

Features Include:

7800 Series


SA

RG

EN

T1

77800 / 8200 Series MortiseLockset Functions

8204 7804• Key outside or lever/knob inside retracts latchbolt.• Lever/Knob outside rigid at all times.• Auxiliary deadlatch.• ANSI F07

8205 7805• Key outside retracts latchbolt when outside lever/knob is locked.• Lever/Knob inside retracts latchbolt.• Lever/Knob outside is locked/unlocked by thumb turn inside or by key outside.• Auxiliary deadlatch.

Note: Available with toggle as a 55 function.• ANSI F04

8215 7815• Lever/Knob from either side retracts latchbolt at all times.• ANSI F01

8213• No outside lever/knob or cylinder• Lever/Knob inside retracts latchbolt• Auxiliary deadlatch• ANSI F31


SA

RG

EN

T


18

8243• Key outside or thumb turn inside retracts and projects deadbolt.• Key outside retracts both latchbolt and deadbolt, lever/knob outside remains locked.• Lever/Knob from either side retracts latchbolt, except when lever/knob outside is

locked.• Lever/Knob outside is locked by toggle or projecting deadbolt.• Lever/Knob outside is unlocked by toggle only.• Lever/Knob inside (when deadbolt is projected) retracts latchbolt and deadbolt simul-

taneously, and lever/knob outside remains locked.• Auxiliary deadlatch.• ANSI F20

7800 / 8200 Series MortiseLockset Functions

8237 7837• Key outside locks and unlocks lever/knob outside.• Key outside retracts latchbolt.• Lever/Knob outside retracts latchbolt, except when outside lever/knob is locked by

key.• Lever/Knob inside always retracts latchbolt.• Auxiliary deadlatch.• ANSI F05

8225• Key outside or thumb turn inside retracts and projects deadbolt.• Lever/Knob from either side retracts latchbolt, when the deadbolt is in the

retracted position.• Lever/Knob outside is locked, when the deadbolt is projected.• When deadbolt is projected, lever/knob inside retracts latchbolt and deadbolt

simultaneously, unlocking outside lever/knob.• ANSI F13

8217• Guardbolt deadlocks latchbolt.• Both trim rigid at all times.• Latchbolt retracted by key either side.

8226• Key from either side retracts and projects deadbolt.• Lever/Knob from either side retracts latchbolt.• Latchbolt and deadbolt are independent of each other.• Same as 24 Function with two cylinder and no thumb turn.• ANSI F14



SA

RG

EN

T1

97800 / 8200 Series Mortise LocksetFunctions and Trim Designs

8293• Lever/Knob on one side only is always rigid.• Lever/Knob only used as door pull.

8294• Lever/Knob on both sides are always rigid.• Lever/Knob only used as door pull.

8265 7865• Lever/Knob outside retracts latchbolt except when locked by thumb turn inside.• Lever/Knob inside retracts latchbolt and unlocks outside lever/knob.• Emergency Release unlocks lever/knob outside.• Thumb turn locks and unlocks lever/knob outside.• Closing the door will unlock lever/knob outside.• ANSI F22


55 Office or Entry8255 7855• Key outside retracts latchbolt when outside lever/knob is locked• Lever/Knob inside retracts latchbolt only, outside Lever/Knob remains locked• Lever/Knob outside is locked by toggle only• Auxiliary deadlatch

SA

RG

EN

T


20 7800 / 8200 Series Mortise

Lockset Trim Designs

LNB Design• Rose: LN• Lever: B

LNJ Design• Rose: LN• Lever: J

LNL Design• Rose: LN• Lever: L

LNP Design• Rose: LN• Lever: P

LW1L Design• LW1: Escutcheon• Lever: L• Wrought escutcheon• (2) Exposed screws inside

LW1B LW1PLW1J

LW1L

KW1B

• LW1: Escutcheon • Wrought • (2) Exposed• B: Knob escutcheon screws inside

7800 Series


SA

RG

EN

T2

17800 / 8200 Series Mortise Locksets

How to Order 8200 Mortise Lever Locks

FUNCTION DESIGN FINISH HAND CYL. KWY.

7804 8204 LNB US3 LH LC SEE7805 8205 LNL US10 RH PAGE7815 8215 LNP US10B LHR SAR-37837 8225 LNJ US26 RHR7845 8237 LW1B US26D7855 8245 LW1L7865 8265 LW1P8216 8293 LW1J & LNA8238 82948239 8240

824182508255

OPTIONS SPECIFY Door Thickness 1-3/4"Less Cylinder LC

Sargent I-C Core 63Small I-C Core 70

Unless otherwise specified, locks will be furnishedstandard for RH, 1-3/4" door, “LA” keyway cylin-ders x keyed random.

LNB • • • • •LNJ • • • • •LNL • • • • •LNP • • • • •LW1B • • • •LW1J • • • •LW1L • • • •LW1P • • • •

TRIM

DES

IGN

US3 US10

US10B

US26

US26D

FINISHES

8270• Fail safe.• Power on locks outside lever.

8271• Fail safe.• Power off locks outside lever.

Electrified Lock Bodies

Custom cable lengths available forElectroLynx connections. Call AkronHardware for pricing and information.

SA

RG

EN

T


22

The Powerglide® line of surface and concealed doorclosers has been engineered to meet the demands ofthe modern architect and building owner. All seriescompliment each other, and together offer a completeline for interior and exterior doors.

• ANSI/BHMA A156.4 Grade 1.• Conforms to standards UL 10C and UBC 7-2 (1997). Positive Pressure Fire Tests of door

assemblies.• UL Listed and cUL Listed to Canadian Safety Standards listed for use on fire doors.• 10-year warranty.• Versatile mounting applications

permit standard, top jamb, parallel and track installations.

• Adjustable spring power allows 351 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory.

• One door closer body for all applications, non-handed.

• ADA requirements are met with the 351 in all applications except Push Side Track application.

• High impact non-corrosive plastic covers standard,metal optional. Both secured with two machine screws.

• All weather capabilities.• Captivated brass valves.

Features Include:

281 / 351 Series Door Closers

As a member of the Powerglide® closer family, the 1430series offers superb efficiency and flexibility…soimportant to today’s architectural concepts. Highlysophisticated climatic control systems and complicatedtraffic patterns demand that buildings be equippedwith just the right closer on every door.


SA

RG

EN

T1430 Series Door Closers

23

• ANSI/BHMA A156.4 Grade 1.• Conforms to standards UL 10C and UBC 7-2 (1997). Positive Pressure Fire Test.• 10-year warranty.• Versatile mounting applications permit standard, top jamb, parallel and track installations.• Adjustable Spring Power allows the 1430 closers a size range of 3 through 6. They are

adjusted to size 3 before leaving the factory. The 1431 closers are adjustable from size 1through 4. They are adjusted to size 1 before leaving the factory.

• Full Rack and Pinion provides control from the full open position.• High performance aluminum body is constructed from a carefully selected aluminum

silicon alloy to accommodate the door closer characteristics increasing the body strength and wear resistance.

• Total engineering concept has provided an extremely efficient closer giving increased closing power with today’s required lower opening forces.

Features Include:

SA

RG

EN

T


24 281 / 351 / 1430 Series

Door Closer Mountings

This closer mounts on the hinge (pull) sidetop rail of door. It can be used on interiordoors opening in or out and exterior doorsopening in. The cover projection normallylimits the door opening to a maximum of160°.

Standard Application Parallel Arm Application

The closer is mounted on the top rail on thestop side of the door. As the door opens, thecloser swings with the door and gives fullheadroom in the door opening.

The closer is mounted on the door. As the door opens, the closer swings with the door. Foruse on interior doors opening in or out. This application affords a variable hold-open featurewhich is available on order.

Push Side Track Type Application Pull Side Track Type Application

The closer is mounted inverted on top casingabove stop face of door. As the door swings,the closer arm swings with the door. For useon interior doors opening either in or out;and exterior doors opening out.

Top Jamb Application Double Egress Application


SA

RG

EN

T2

5Door Closer Arm Options281 / 351 / 1430 Series

25-O Regular Arm 25-H Holder Arm

• Forged Steel Arm 11-1/4" (286mm) long.• For reveals up to 2" (51mm).• Non-Handed.• Permits 180° door opening.

• Forged Steel-Arm 11-1/4" (286mm) long.• For reveals up to 2" (51mm).• Adjustable friction holder.• Non-Handed.• Permits 180° door opening.

25-PS Stop Arm (Heavy Duty) 25-PH9 90º Holder Arm

• Forged Steel Arm 11-1/4" (286mm) long• Handed arm is field reversible• Provides built in stop from 85° to 110°• Permits 110° opening maximum• Easily installed• 125-VF bracket is used for flush frame

conditions. Bracket is ordered separately• 125-V bracket is used for narrow stop

conditions. Bracket is ordered separately• Permits 85° to 110° door opening

• Forged Steel Arm 11-1/4" (286mm) long.• Non-Handed.• Equipped with an adjustable friction

holder.• Holds open from 75° to 180°.• Easily adjusted by wrench.

SA

RG

EN

T


26 Door Closer Arm Options

281 / 351 / 1430 Series

25-PSH Holder Stop Arm(Heavy Duty)

• Provides holder and stop features.• Handed arm is field reversible.• Easily installed/adjusted.• For flush frame conditions, are mounts on

125-VF bracket. Bracket must be orderedseparately.

• For narrow frame conditions, arm mountson 125-V bracket. Bracket must beordered separately.

• Permits 85° to 110° door opening.

351-D Drop Plate• Permits mounting 351 Series Closers hav-

ing parallel arm applications on doorswith narrow top rails.

• Requires 3" (76mm) minimum top rail.• For closers used with overhead stops and

holders.

125-P9 Parallel Arm Foot

• Converts standard arm 25-0 to a P-9(Parallel Arm).

How to Order Door Closers

SERIES ARM FINISH THRUBOLTS

281 UO EAB TB351 H EB1130 RU EN1330 HU1430 PS1431 PSH

CPSH

Unless otherwise specified, door closers will befurnished standard from Akron Hardware withuniversal arm for regular or parallel mountingoptions and thru-bolts.

25-CPSH Heavy DutyCompression Holder Arm

• Forged Steel Arm 11-1/4" (286mm) long• Handed arm is field reversible.• Provides built in compression stop and

holder mechanism from 85° to 105°.• Easily installed/adjusted.• Permits 105° opening maximum.• 125-VF bracket is used for flush frame

conditions. Bracket is ordered separately.• 125-V bracket is used for narrow stop

conditions. Bracket is ordered separately.• Dead stop within 3°.


SA

RG

EN

T2

7

• Reversible.• Full rack and pinion.• High strength cast aluminum case.• Versatile mounting...standard, inverted or parallel.• Arm leverage adjustment.• Heat treated high tensile springs.• One piece spindle heat treated for high strength.• Separate key controlled regulating valves for

door closing and latching speed.• Valves are captivated to prohibit vandalism.• Adjustable backcheck valve is standard.• UL and ULC listed.• ANSI Grade 1 A156.4.• Parallel Arm Conversion bracket included.• Mortise nuts and thru bolts included.• Auxilary door stop required.

1130 Series Door Closers

The 1130 Series economy door closer is ideally suitedfor hotel guest room doors, retail buildings, interioroffice doors and retro-fit on store front entry doors.

Features Include:

Standard Application

Parallel Arm ApplicationTop Jamb Application

SA

RG

EN

T


1331 Series Door Closers

The SARGENT 1331 Series door closer is a Grade 1 fully adjustablecloser suitable for new construction and also ideal for renovations.Common applications include offices,assisted living facilities, hotel guest rooms, public housing and retail establishments.

• Meets and exceeds ANSI/BHMA A156.4Grade 1 requirements.

• UL and UL 10C listed.• Complies with ADA requirements and

ANSI 111.7 and exterior doors.• Adjustable closing force range from size

1 - 6.• High impact full plastic cover secured by

machine screws.• One-piece high strength aluminum alloy

body• 1-1/4” diameter piston for enhanced con-

trol.• 7/16” square arm engagement for

enhanced torque transmission.• Heat treated rack & pinion provides

longevity.• Speed Control Valves.

- Separate latching, closing/sweep andback check intensity valves.

- Captivated valves are easily adjustedusing a standard 1/8” Allen wrench.

• Arms and accessories are powder-coated• Non-handed closer.• All weather hydraulic fluid.

Features Include:

Standard Application

Parallel Arm Application

Top Jamb Application

28


SA

RG

EN

T2

980 Series Exit Devices

nation of Simplicity, Strength, Durability,Aesthetics and Innovation and are perfect forapplications in commercial office buildings,medical and educational institutions.

SARGENT manufactures a full line of exitdevices that includes vertical rod, rim andmortise devices for both standard and nar-row stile doors. They provide the best combi-

8400 Series

• Designed for narrowstile applications suchas full glass doors.

• Concealed rods forsecurity and aesthetics.

• UL Fire and Panic list-ed. 8700 Series

• Designed for standard width stileapplications on metal and wood doors.

• Top case latchbolt projectionadjustable through center case.

• Standard bottom latch compatible withlatchtrack thresholds (by others).

• Single and double door applications.• UL Fire and Panic listed.

8500 Series

• Designed for narrowstile applications suchas aluminum framefull glass doors.

• Rim bolt for quietoperation and security.

• UL Panic listed.

PP8700 & PR8700

• The security pf a stainless steelcenter bolt and two top boltswithout the issues of bottomrods

• Top case latchbolt projectionadjustable through center case.

• UL Fire and Panic listed.

8400

8700

8500

PP8700

SA

RG

EN

T


30 80 Series Exit Devices

8800 Series• Designed for standard

width stile applications onwood and metal doors

• Non-handed, fieldreversible

• Single and double doorapplications

• UL Fire and Panic listed 8900 Series• Designed for standard width stile

applications on wood and metaldoors.

• Thru-bolted mortise lock for quietoperation and security.

• Single and double door applications.• UL Fire and Panic listed.

8800

8900

8900 Series Applications 8800 Series Applications


SA

RG

EN

T3

1ED56 Latch Retraction Conversion Kit for 80 Series

This non-handed exit device rail is durable and easy toinstall. It utilizes a motor for latch retraction ratherthan a solenoid, ensuring quiet operation, ideal forlocations such as conference rooms, theaters andlibraries. Once retracted the door functions in apush/pull manner.

Once retracted the door functions in a push/pull man-ner. The 56- exit device can be dogged for momentaryingress and egress and is commonly used in conjunc-tion with an automatic door operator. The device canbe dogged continuously on fire rated devices tied intothe building's fire detection system.

Features Include:

• On-board adjustable retraction - withjust the turn of a dial

• On-board adjustable timer - eliminat-ing costly external timers

• Manual Dogging available: HK- Prefix• Upgrade existing 80 Series rails - retro

kits available - Field serviceable• Motor driven latch retraction for

smooth, precise operation• Power Requirements: 24VDC

Regulated/Filtered Power Supply• Low current draw 900mA during

retraction & 150mA maintained indogged position

• Standard Electric hinge - No specialpower transfer device required

• UL Listed for Class II Circuitry• Order as a 56- prefix

• Optional signal switch (55-) is avail-able to monitor push rail status, indi-cating rail activity or when unit isdogged and undogged

• Available for all 80 & P800 Devices,except FM8700

• Door Widths: 26" to 48"• Compatible with 12-, 16-*, 53-, 55-, TL-

& HK-‡ Prefixes• Provided with ElectroLynx™ 8 Pin & 4

Pin Connectors• ElectroLynx™ Hinge for 56- w/o use of

timer mode, is a McKinney QC4• ElectroLynx™ Hinge for 56- using the

timer mode is a McKinney QC12

SA

RG

EN

T


32 80 Series Exit Devices

Trim Designs

ET Lever Controls ETB

ETP

PTB

ETJ

ETL


SA

RG

EN

T3

320 / 30 Series Exit Devices

20 Series• Rugged exit device in surface vertical rod and rim designs.• Chassis mounted unit construction assures easy installation

and maintenance.• Available in four different functions.• UL Listed to Canadian safety standards.• Available as Fire Exit Hardware (12-).

2727

2828

3727

3828

30 Series• Rugged exit device in surface vertical rod and rim designs• Chassis mounted unit construction assures easy installation

and maintenance• Tapered push rail and angled covers• Steel endcaps and covers• Available with various trim selections.• UL Listed to Canadian safety standards• Available as Fire Exit Hardware (12-).

SA

RG

EN

T


34 20 / 30 Series Exit Devices

Applications and Trim Designs

Single Door Pairs of Doors without Mullion

Pairs of Doors with 980 Mullion Pairs of Doors without Mullion

Vertical Rod Type 2727, 3727Surface applied 2 point lock.

Rim Type 2828, 3828Surface application.

Vertical Rod Type 2727, 3727 – 2 EachSurface applied 2 point locking both doors.Each door active. Do not use an overlapping astragal.

Rim Type 2828, 3828 – 2 Each980 Mullion – 1 EachTwo independent active doors with full doubledoor opening when required.

Vertical Rod Type 2727, 3727 – 1 EachRim Type 2828, 3828 – 1 EachBoth devices are surface applied.A coordinator is recommended.

Trim Designs

GTB(5800 Series only)

OB LL

HTB(20/30 Series only)

For Sargent, Available For Immediate Shipment, See Our Manufacturers Parts Section.


SA

RG

EN

T3

5Exit Devices Parts / Components

644 Strike 815 Open Back Strike

646 Top Strike Glass Bead Shim Kits

647 Strike

SA

RG

EN

T


36 20 / 30 / 80 Exit Devices

How to Order Exit Devices

PREFIX SERIES/FUNCTION SIZE FUNCTION/TRIM FINISH HAND

14 2710 8515 F 28-K-GTB 713-ETB PEB LHR12 2727 8710 G 28-C-OB 713-ETJ PEN RHR

2828 8713 28-C-LL 713-ETL US33727 8763 28-L-LL 713-5-ETL US103828 8863 88-C-LL 713-8-ETB US10B8406 8888 88-C-LB 713-8-ETJ US26D8410 8913 88-C-LP 713-8-ETP US32D8504 8963 88-K-LL 713-8-ETB8510 88-L-LL 715-8-ETB8513 88-L-LB 715-5-ETL

88-L-LP 715-8-ETJ704-ETB 715-8-ETL704-ETL 715-8-ETP704-ETP 832-PTB710-ETL

OPTIONSWidth Thru 36" (F)Width Thru 48" (G)

Less Cylinder (Key in Lever)Less Cylinder (Esc./Pull Trim)

IC CoreV.R. Extension 84" – 96"V.R. Extension 96" – 120"

U.L. Rated

LB •LL • • • •LP • • • •ETB • • • •ETJ • • • •ETL • • • •ETP • • • •PTB •

TRIM

DES

IGN

US3 US10

US10B

US26D

US32D

FINISHES

Unless otherwise specified, exit devices willbe furnished standard for RHR, 1-3/4" door,36" width. “LA” keyway cylinders (whereapplicable) x keyed random.

OB 2-1/8" 3" 2-1/2" •GTB 2-1/8" 1-3/16" 2-1/2" • •LL 4-1/2" 2-1/2" 3-1/2" • •

TRIM

DES

IGN

US3 US10

US10B

US26D

PEB

FINISHES

LEVER

LENGTH

/KNOB D

IA.*

PROJE

CTION

ROSE D

IAMET

ER

PEN


SA

RG

EN

T3

7Exit Alarms and Mullions

5800 Exit Alarm

550 Exit Alarm

980 Removable Mullion650A Removable Mullion

• Cover and base are nonferrous alloys.• 1-3/4" thick standard with a 4" minimum stile

width.• Electronics Modern solid state circuitry.• 9 volt alkaline battery (included).• Red flag indicates armed condition.• Authorized exit is permitted for approximately 15

seconds after activation without sounding thealarm.

• A red LED alarm light is provided which flashes tomake any violation visible.

• Cover and chassis are nonferrous alloys.• 1-3/4" thick standard with a 4-1/2" minimum stile

width.• Adapter plates available for narrow stile doors

(3274/3275).• 9 volt alkaline battery (included).• Red flag indicates armed condition.• 15 second delay feature to allow for exit.• A red LED alarm light flashes indicating violation

occurred.• Available trims – OB, GTB, and LL.

The 650A Mullion assembly consists of:• Mullion• 94-2050 Top Retainer• 94-2051 Bottom Retainer• 651 Stabilizer• 96" (2438mm) stock size• Up to 120" (3048mm) size available• Prepped for (2) 658 strikes (included)Finishes: US28 Aluminum anodized clear, 313ANAluminum to match 10B

980 Extruded Aluminum (prime coat) 980A Aluminum(US28) Consists of:• Mullion• 511 Top retainer• 502 Bottom retainer• 96" (2438mm) stock size• Up to 120" (3048mm) size avail.

SA

RG

EN

T


38 Electrified Exit Devices

gency exit doors. The alarm inside the railsounds immediately upon exit. The AL-80Series is ideal for rear exterior doors, doorsleading to a rooftop, or anywhere security isa concern.

SARGENT’s AL-80 Series Exit Devices aredesigned for areas requiring a stand-alonealarm on outward swinging doors.This devicehas an integrated alarm in the push rail todiscourage the unauthorized use of emer-

55- Signal SwitchThe signal switch monitors the push rail position and isactivated when the push rail is depressed.

55-8895 Active Push BarRail assembly furnished with 55- signal switch and nolatching mechanism on exit device. Used for release ofelectromagnetic lock or egress signaling.

ETL 775/776• For use with 8800, 8900.• Key from outside retracts

latch mechanically.• Lever is unlocked when

power is off – Fail Safe(775).

• Lever is locked when poweris off – Fail Secure (776).

• Field reversible.

55-8800 Series

55-8700 Series

59-8800 Series

59-8700 Series 855 Switch Kit

56-80 Latch Retraction


SA

RG

EN

T3

9Holders and StopsAuxiliary Locks / Hospital Latches

1540 Series• Surface application for interior single

acting doors.• SARGENT 1540 series holders and

stops are made from extruded bronze• Non-Handed (reversible)• Holder/Stop is surface mounted with

arm and bracket attached to top jamb.

590 Series Heavy Duty• Surface application for exterior and interior

single acting doors.• SARGENT 590 Series Door Holders and Stops

are made from rugged, extruded bronze.• All holders/stops are installed for a particu-

lar degree of hold open or stop rangingfrom 85° to 110°.

1560 Surface Mount• Designed for use with self-closing fire and smoke

barrier doors.• Use independently or with any fire or smoke

detector system.• When de-activated, helps control the spread of

fire and smoke by automatically releasing doorsfrom an open position for simultaneous closing.

4870 Series

470 Series

480 Series

114 Push-Pull115 Push-Pull

1560 Surface Mount

858 PadlockAvailable with 1 or 2” shackle

SA

RG

EN

T


40 Electrified Keypad Devices

The SARGENT Keypad Lock is designed for areas which requireauthorized entry. It is a self contained microprocessor controlledlock with non volatile memory. The non volatile memory insurescodes will not be lost even if the batteries stop functioning. Thecylindrical lock is a battery operated motor driven lock, which istotally programmable through the keypad for all functions.

KP10G77 10 Line Keypad Lock

The Keypad Mortise Lock is designed for areas which requireauthorized entry. It is a self contained microprocessor controlledlock with non volatile memory. The non volatile memory insurescodes will not be lost even if the batteries stop functioning. Themortise lock is a battery operated motor driven lock, which istotally programmable through the keypad for all functions.

The SARGENT keypad operated rim/mortise exit device isdesigned for areas that require authorized entry, such as stairwelldoors, meeting rooms, company health clubs, etc. It is a self con-tained microprocessor controlled lock with non volatile memory.This memory insures that the codes will not be lost, even if thebatteries stop functioning. The keypad will hold a total of 100 dif-ferent user codes.

KP8276 / 8278 Mortise Keypad Locks

KP8877 / 8977 Keypad Rim / Mortise Exit Device

Custom cable lengths available forElectroLynx connections. Call AkronHardware for pricing and information.


SA

RG

EN

TElectromagnetic Locks

1584 - Push Application - Single Door

• Metal dress covers supplied for 28, EBand ED finishes.

• 1584 – 32D only.• 1584H – Includes dress cover for 28, EB

and ED finishes.

1586 - Pull Application - Single Door

• Electromagnetic lock mounted oninswinging side of the door to protect itfrom physical assault.

• “Z” bracket with cover in 28, EB and EDfinishes supplied standard.

Header Extension Bracket15-2107

• Dimensions: 3" x 3" x 8".• Used to extend a narrow header.• Available in 28 or ED finishes.

Pull “Z” Bracket15-2114

• Allows mounting of electromagnetic lockon inswinging doors.

• Bracket includes cover providing attrac-tive finish appearance.

• Wall switch engravedwith handicap logo.

• Concealed socketmounting screws.

• Normally open momen-tary contact (SPDT).

• Face plate dimension: 4-5/8" W x 4-1/2" H.

• Double gang electricalbox required.

• Wall switch engravedwith handicap logo and“Press to OperateDoor”.

• Concealed socketmounting screws.

• Normally open momen-tary contact (SPDT).

• Face plate dimension:4-5/8" W x 4-1/2" H.

• Double gang electricalbox required.

4296H 4296HP

Switches

41

SA

RG

EN

T


42 Electrified Parts and Components

• UL Class 2 Listed• Three models available: 1, 2 or 6 Amps• Integral battery charging capability keeps sealed lead acid

gel/cell at full charge in case of line voltage failure (Separate)• Fused line voltage input with one, four, or eight DC out-

puts (depending on model)• Each circuit can be individually turned on & off via a slide

switch and the power status of each is shown by an LED• In the event of a DC short, problem is confined to the zone

of difficulty• Fire alarm interface standard

3520 3540 3570 Power Supply

Sargent ModelNo.

Description

3520 24V - 1 AMP Power Supply3540 24V - 2 AMP Power Supply3570 24V - 6 AMP Power Supply

738 24V - 5 AMP Hour Backup Battery


SA

RG

EN

T4

3Electrified Parts and Components

4291 Keypad• Designed for indoor use.• Single door application.• 15 user codes. (1-6 digits).• One master code (1-6 digits).• Momentary control adjustable (1-90 seconds).• Maintained control infinite.

4292 Keypad• Designed for outdoor use (20°F-130°F)• Weather resistant. Not to be used in direct sunlight or rain.• Single door application.• 15 user codes (1-6 digits).• One master code (1-6 digits).

4298MomentaryPush Plate

4352Junction Box 4297HP

Jamb Switch

3261

Keypads

Accessories

Armored Door Loop

Call our Sales department - toll free - for current pricing on all SARGENT products

4352Keyswitch

SA

RG

EN

T


44 4293 Stand-Alone Proximity Reader

• 12VDC or 24VDC hard-wired proximity reader.• Main relay – switches up to 2 amp.• 2,000 users and 2,000 audits.• Database capacity of 10,000 individual users.• Weather resistant electronics (gasket included).• Supports all HID formats by keypad presentation.• Separate (auxiliary) 2 amp relay to signal alarm shunt, propped or forced door (must use

door status switch).• Audio alert for propped and forced door.• Can be mounted on secure side of door with internal RX switch capability.

The 4293 Wall Prox can be programmed and managedfrom a Personal Computer using Softlink Plus v.4 soft-ware. It is programmable via infra-red communicationsusing a PDA, or can be programmed manually using thekeypad on the unit. The unit can be used to controllocking devices on single or paired door openings.This unit is self-contained and includes HID technology,a keypad and controller. The Prox unit antenna can beremotely mounted up to 10 feet away from keypad/con-troller.

Features Include:

Application:


SA

RG

EN

T4

5Profile Series v.G1Stand-Alone Access Control Products

• 2,000 individual users.• 2,000 event transaction history (audit trail) – provides parameters such as unlock, egress

activation, entry into programming mode, date, time, user number and door number.• PDA (wireless) communication to and from lock.• RF technology option (G1-TU, G1-TP G1-TA).• Locks supports all HID proximity bit formats when programmed through keypad (presen-

tation method).• Moisture resistant coating on electronics.• For use on exterior doors with weatherseal gasket, conduit and shroud (optional, order

separately).• Non-volatile memory.• Easily programmable at keypad for basic features on G1-LU, G1-PK, G1-TU and G1-TP

products.• SofLink Plus™ w/ SofLink PDP™ Access Control Management software allows simple

programming and interrogation using PDA (wireless) data transfer.• PDA infrared communication performed on outside of door.• SofLink Plus™ w/ SofLink PDP™ Software required for programming proximity only (G1-PA,

GI-TA) and where time zone functions are required for the G1-LU, G1-PK, G1-TU and G1-TP.• Unlock time adjustable (1-99 seconds).• LEDs on unit indicate status – green indicates unlocked; yellow indicates programming mode.• Audible beep sounds with each keystroke or can be disabled through programming.• UL Listed for fire doors (12- for exit devices).• UL Listed to Canadian safety standards.• Remote power and request to enter available – requires wire harness (52-2500) and

hard wiring.• Low battery indication – four chirps after code entry. Master and emergency code will

operate lock after the low battery indication period has passed and user codes nolonger operate the lock.

• User Codes – over 1,100,000 possible user combinations.

The Profile Series v.G1 of stand-alone access controlproducts provide the user with a broad selection oftechnologies. From the basic keypad programmed LKSeries to the fullfeatured G1-TP Series, programmed viaPDA data transfer, all units utilize a battery poweredmicroprocessor based controller with non-volatilememory to preserve user coding.The SofLink Plus™ w/ SofLink PDP™ application soft-ware allows you to meet your facility’s needs whilemaintaining a stand-alone, single door electronicaccess control system.

Features Include:

SA

RG

EN

T


46 Profile Series v.G1

Stand-Alone Access Control Products

The “G1-LU” (keypad only) configuration of stand-alone accesscontrol products are ideal for dormitories, assisted living facilities,hospitals, retailers, apartments and office complexes. Programmingis done through the keypad for most basic functions or via SofLinkPlus PDP™ application software. The controller willretain a total of2000 different user codes varying in length from one to six digits.

“G1-LU” Keypad Operated Products

The “G1-PK” (proximity/keypad) version of stand-alone access con-trol products offers the highest level of security and flexibility.These products can be programmed via keypad or SofLink Plus™w/ SofLink PDP™ to require both a code (1-6 digits) and proximitycard/fob/tag presentation to gain entry. It can also be programmedfor keypad or proximity presentation only.

“G1-PK” Proximity/Keypad Products

The “G1-PA” (proximity only) configuration of access control pro-vides a higher level of security because all programming must behandled through the SofLink Plus™ w/SofLink PDP™ applicationsoftware. This configuration is ideal for high traffic applicationswhere keypad usage is not desirable: universities, laboratories orhospitals. A “master” Comm Enable proximity card or fob isrequired to initiate programming of the lock.

“G1-PA” Proximity Only Products

Bored Shown

Mortise Shown

Exit Device Shown


SA

RG

EN

T4

7Bored Locks

• Latch retracted by inside lever at all times.• Key outside retracts latch.• Outside lever rigid except when in “passage” mode or valid

user code entered.

10G77 Entry Lock with Cylinder

Escutcheons

The SofLink Plus w/ SofLink PDP Access Control Management Softwareallows simple programming and interrogation of the Profile Series v.G1access control products. This software provides the means for fast, con-venient assignment of access levels, doors, users, time zones, and man-agement of multiple doors with full audit trail capability. Communicationbetween the computer and lock controller is via PDA that allows forquick and efficient program transfer and audit trail retrieval.

Features:• 10,000 user name database• User name import function from database• Auto unlock with or without “first-in” authorization• Holidays (16 single days; 16 blocked)• Access level oriented format• Directly supports 26, 33, and 34 HID bit formats

- For 35 Bit HID Corporate 1000 Format consult factory

Hardware Requirements:• Windows 98/2000/XP (to include all subsets)• VGA monitor• CD ROM drive• Instruction Manual included• Personal Digital Assistant (PDA) see chart for

compatible models

SofLink Plus™ w/ SofLink PDP™ Access Control Management System

#52-2846

Compatible PDAsPDA MFG Model Number

Palm M500Palm M505Palm ZirePalm Zire 21Palm Zire 71Palm Palm VPalm Palm VxPalm Palm VIIxPalm Tungsten EPalm Tungsten T2Sony Clie SJ20

Consult factory for other compatiblemodels.

SA

RG

EN

T


48 Mortise Locks

8276 with Cylinder• Key outside retracts

deadbolt and latch.• When deadbolt

thrown, outsidelever operable onlywith Emergency orMaster code.

• Deadlocking latch• Latch and deadbolt

retracted by insidelever at all times.

• Outside lever rigidexcept when in“passage” mode orvalid user codeentered.

Entry Locks

8278 with CylinderLess Deadbolt• Key outside retracts

latch.• No deadbolt func-

tion.

Inside/OutsideEscutcheon

Exit Devices

8877 Rimwith Cylinder

8977 Mortisewith Cylinder

Exit Locks• Latch retracted by

inside push rail atall times.

• Outside lever rigidexcept when in pas-sage mode or validuser code entered.

• Outside cylinderoverride retractslatch.

OutsideET Lever Control

Escutcheons

OutsideInside


SA

RG

EN

T4

9Access Credentials

Sargent HID ProxCard II™

• 26 Bit format.• SARGENT logo on

card P/N PCHL70.• Blank (white) card,

P/N PCHB70.• 25/pkg.• Thickness: .070" nom. (1.8mm).

HID Prox Card II™

MicroProx™ Tag

The MicroProx™ Tag is a coin sized (disk shaped) transponder that pro-vides the ability to add HID proximity technology to a device.Easily secured to:

• Employee badges.• PDAs.• Magnetic stripe cards.• Cell phones.

• 26 Bit format with SARGENT site code.• 26 Bit format with Custom site code.• Sequence numbers marked on each Tag.• Gray color with HID Logo.

Sargent Fobs

PF ProxKeyII™• 26-Bit format.• Site code controlled by

SARGENT.• 25/pkg. with rings.• Dimensions: 1-29/32" x 29/32"

x 11/32" (48mm x 23mm x9mm).

52-2551 RF Fob• Used with RF Technology (TU,

TA, TP).• Operating frequency: 418MHz.• Operating distance: 35-75 ft

inside door 10-25 ft outsidedoor.

• Sold separately.

akron hardware product catalog version 3 · pdf filesargent sargent sargent sargent sargent...

Documents