aircraft icing - metu
TRANSCRIPT
![Page 1: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/1.jpg)
Aircraft Icing“Icing Physics”
Prof. Dr. Serkan ÖZGEN
Dept. Aerospace Engineering, METU
Fall 2015
![Page 2: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/2.jpg)
• Formation of ice in the atmosphere• Supercooled water droplets• Mechanism of aircraft icing• Icing variations• Ice growth• Precipitation type and icing• Precipitation and type of cloud
Outline
2Serkan ÖZGEN
![Page 3: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/3.jpg)
• Physical factors effecting aircraft icing• Icing intensity (severity)• Liquid water content• Temperature• Droplet diameter• Collection efficiency• Airspeed• Ice accretion modeling
– Flow field calculation– Droplet trajectory calculation– Thermodynamic analysis– Ice accretion calculation
Outline-continued
3Serkan ÖZGEN
![Page 4: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/4.jpg)
• Water is the only substance that can be found in allthree phases (gas, liquid, solid) in the atmospheredepending on the temperature and pressure.
• The concentration of water vapor may range from near zero in desert regions to as high as 4% in tropical regions.
• Saturation occurs when water vapor is added to the air or, when the air is cooled.
Formation of ice in the atmosphere
4Serkan ÖZGEN
![Page 5: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/5.jpg)
• Condensation nuclei: microscopic particles present in the atmosphere, such as salt crystal, dust, and smokeparticles.
• Hygroscopic particles: particles which contribute to transform the water vapor into liquid or ice.– Condensation nucleus: 1m
– Droplet: 10 m (10 seconds)
– Droplet: 100 m (500 seconds)
– Rain drop > 200 m (3 hours)
Collision/coalescence mechanisms
Formation of ice in the atmosphere
5Serkan ÖZGEN
![Page 6: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/6.jpg)
• Cloud droplets do not freeze until they reach temperatures far below the freezing temperature.
• When temperature approaches -40oC the droplets freeze rapidly and transform to ice crystals.
• Supercooled droplets: the droplets that stay liquid attemperatures below 0oC.
• Small droplets do not freeze at 0oC because their molecules do not line up in the proper order to form ice crystals.
• Supercooled droplets are unstable and may rapidly change from liquid to ice whenever their stability is perturbed.
Supercooled water droplets
6Serkan ÖZGEN
![Page 7: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/7.jpg)
• Two conditions must be present:
– Ambient temperature must be below below 0oC,
– Supercooled water droplets must be present.
• As the impacting water droplets freeze, heat is released so that their temperature rises until 0oC is reached. After thisfreezing stops and the unfrozen water starts to run back along the surface of the aircraft or along existing ice and freeze downstream (runback ice).
– At cold temperatures a large part of a droplet freezes (rime ice),
– At higher temperatures only a small part freezes while the remaining part freezes slowly (glaze ice).
Mechanism of aircraft icing
7Serkan ÖZGEN
![Page 8: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/8.jpg)
• Rime ice is a dry, milky and opaque ice deposit which usually occurs at low airspeed, low temperature and low liquid water content.
• Characterized by instantaneous freezing of the incoming supercooled water droplets upon impact trapping the air inside.Freezing fraction = 1.
• As a consequence, the shape of the surface is altered generating performance penalties due to the loss in the aerodynamic characteristics and to the added weight which introduces an unbalance of the aircraft components during the flight.
Rime ice
8Serkan ÖZGEN
![Page 9: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/9.jpg)
Rime ice
9Serkan ÖZGEN
![Page 10: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/10.jpg)
• Glaze is a wet growth ice formed at a temperature around 0oC and a high liquid water content .
• It has a clear appearance and a density closer to that of the cloudwater.
• It occurs when a fraction of the water droplets freezes upon impact while the remainder droplets run back along the surfaceand freeze downstream. Freezing fraction < 1.
• This ice accretion process produces different ice shape deposit: such as double horned, beak or a rounded glaze ice.
• Glaze ice accretion dangerously affects and alters the shape of the original surface body producing aerodynamic penalties much more severe than rime ice accretion can cause.
Glaze ice
10Serkan ÖZGEN
![Page 11: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/11.jpg)
Glaze ice
11Serkan ÖZGEN
![Page 12: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/12.jpg)
• Icing intensity may be severe in some regions and light in some other regions depending on the structure, horizontal and vertical extents, and the contents of the clouds.
• Icing conditions varies with altitude, season and geographical regions.
• Icing is more serious in winter season at altitudes of 7000 to 9000 ft above ground level.
• At high altitudes, above 20 000 ft (6 km) icing is rare and have light intensity.
Icing variations
12Serkan ÖZGEN
![Page 13: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/13.jpg)
• The minimum low temperature for icing is -40oC, for low temperatures all water droplets transform to ice crystals.
• Icing may also vary with horizontal extent of clouds due to the variation of liquid water content.
Icing variations
13Serkan ÖZGEN
![Page 14: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/14.jpg)
Icing variations
14Serkan ÖZGEN
![Page 15: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/15.jpg)
• There are two mechanisms by which cloud droplets grow:
– coalescence process which occurs because of the different fall velocities of the cloud droplets,
– growth of ice crystals (Bergeron process) due to the coexistence side by side of both ice crystals and cloud droplets.
Ice growth
15Serkan ÖZGEN
![Page 16: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/16.jpg)
Ice growth - coalescence
16Serkan ÖZGEN
![Page 17: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/17.jpg)
Ice growth – Bergeron process
17Serkan ÖZGEN
![Page 18: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/18.jpg)
• Bergeron process is a process of ice crystal growth that occurs in mixed phase clouds (containing a mixture of supercooled water and ice) in regions where the ambient vapor pressure is between the saturationvapor pressure over water and the (lower) saturation vapor pressure over ice.
• This is a subsaturated environment for liquid water but a supersaturated environment for ice resulting in rapid evaporation of liquid water and rapid ice crystal growth through vapor deposition.
• If the density of ice is small compared to liquid water, the ice crystals can grow large enough to fall out of the cloud, melting into rain drops if lower level temperatures are warm enough.
• Vapor pressure or equilibrium vapor pressure is defined as the pressure exerted by a vapor in thermodynamic equilibrium withits condensed phases (solid or liquid) at a given temperature in a closedsystem.
Ice growth – Bergeron process
18Serkan ÖZGEN
![Page 19: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/19.jpg)
Precipitation type and icing
19Serkan ÖZGEN
![Page 20: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/20.jpg)
Precipitation type and icing
20Serkan ÖZGEN
![Page 21: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/21.jpg)
• Meteorological and aerodynamical factors affectingaircraft icing:
– liquid water content,
– temperature,
– relative humidity,
– droplet diameter,
– rate of catch.
Physical factors affecting icing
21Serkan ÖZGEN
![Page 22: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/22.jpg)
Icing intensity
22Serkan ÖZGEN
![Page 23: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/23.jpg)
Icing intensity
23Serkan ÖZGEN
![Page 24: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/24.jpg)
Icing intensity
24Serkan ÖZGEN
![Page 25: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/25.jpg)
Liquid water content - cumulus clouds
25Serkan ÖZGEN
![Page 26: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/26.jpg)
Liquid water content - stratiform clouds
26Serkan ÖZGEN
![Page 27: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/27.jpg)
Liquid water content
27Serkan ÖZGEN
![Page 28: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/28.jpg)
Liquid water content
28Serkan ÖZGEN
![Page 29: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/29.jpg)
Temperature
29Serkan ÖZGEN
![Page 30: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/30.jpg)
• Is the ratio of the mass of droplets impinging on anobstacle, such as wing or airfoil, in unit time to the mass of droplets which would impinge if the droplets were following straight line trajectories.
Collection efficiency
30Serkan ÖZGEN
![Page 31: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/31.jpg)
Collection efficiency
31Serkan ÖZGEN
![Page 32: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/32.jpg)
Collection efficiency (effect of airspeed)
32Serkan ÖZGEN
![Page 33: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/33.jpg)
• When the airspeed is high water droplets do not have enough time to deviate from the airfoil and follow ballistic trajectories, thus more droplets impact on the airfoil.
• As a consequence, the impingement zone will be wider and the icing is expected to occur in a wider region.
• In addition, the velocity has an effect on the type of icing due to aerodynamic heating effect. For high velocity we usually have a glaze ice with horns which may cause separation over the airfoil.
Airspeed
33Serkan ÖZGEN
![Page 34: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/34.jpg)
Collection efficiency (effect of airframe size)
34Serkan ÖZGEN
![Page 35: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/35.jpg)
Collection efficiency (effect of droplet size)
35Serkan ÖZGEN
![Page 36: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/36.jpg)
• A larger airframe will constitute a larger obstacle for the incoming droplets causing them to deviate significantly away from itself. As a result fewer droplets impact the surface over a narrow impingement zone.
• Increasing droplet size has the same effect as increasing the airspeed as far as the droplet trajectories are concerned since the kinetic energy of the droplets increase.
Airframe and droplet size
36Serkan ÖZGEN
![Page 37: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/37.jpg)
• The main objectives of ice accretion simulation:
– calculation of the impingement pattern of the particles on the wing which determines the droplet impingement regions,
– mass of liquid (ice) on the body surface,
– the tangent or limit trajectories used to determine catch distributions or the global and local collection efficiency.
Ice accretion modeling
37Serkan ÖZGEN
![Page 38: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/38.jpg)
• The main applications of ice accretion simulation:
– predict the shape and the rate of ice growth on the airframe,
– predict aerodynamic performance degradations,
– use in the design of anti/deicing systems.
Ice accretion modeling
38Serkan ÖZGEN
![Page 39: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/39.jpg)
• There are four main steps in an icing simulation,
– flow field calculation,
– particle trajectories,
– thermodynamic analysis,
– ice accretion calculation.
• The computational procedure is an iterative process with a time-stepping procedure where successive thin ice layers are formed on the surface and followed by flow field and droplet impingement recalculations.
Ice accretion modeling
39Serkan ÖZGEN
![Page 40: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/40.jpg)
• The flow field calculation is needed to determine the velocity of air at any point in the flow field so that the droplet trajectory calculations can be proceeded.
• Navier-Stokes (sophisticated but accurate) or
• Panel method (simpler but less accurate) can be used.
• Icing calculation accuracy does not improve significantlywith sophisticated methods.
Flow field calculation
40Serkan ÖZGEN
![Page 41: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/41.jpg)
• Droplets are released upstream of the wing and followed until impact on the airfoil surface.
• The droplet equation of motion takes into account the drag, buoyancy and gravitational forces.
• At each integration step, the local velocity needed to solve the droplet equation of motion is obtained from the flow field solution while the integration is continued following droplets until they impinge on the wing surface or pass downstream of the wing.
• Collection efficiency distribution is obtained.
Droplet trajectory calculation
41Serkan ÖZGEN
![Page 42: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/42.jpg)
Droplet trajectory calculation(single element airfoil)
42Serkan ÖZGEN
![Page 43: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/43.jpg)
Droplet trajectory calculation(airfoil with flap)
43Serkan ÖZGEN
![Page 44: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/44.jpg)
Droplet trajectory calculation (wing)
44Serkan ÖZGEN
![Page 45: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/45.jpg)
Collection efficiency distribution (wing)
45Serkan ÖZGEN
![Page 46: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/46.jpg)
• The model is based on the first law of thermodynamics statingthat the mass and energy must be balanced in a control volume.
• The mass balance will take into account– the mass flow rate of the impinging water,
– the mass flow rate of water flowing into the control volume (runback water from previous CV),
– the mass flow rate of water flowing out of the control volume (runback water to next CV),
– the mass flow rate due to evaporation or sublimation,
– the mass flow rate of the freezing water.
Thermodynamic analysis
46Serkan ÖZGEN
![Page 47: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/47.jpg)
• The energy balance will take into account:
– the convective heat losses,
– the heat gain by friction,
– the enthalpy associated with impinging water,
– energy associated with runback water entering the control volume,
– the enthalpy associated with evaporation or running back to neighboring control volumes,
– the internal energy, calculated in relation to a given reference state depending on the type of surface involved: dry, wet or liquid.
Thermodynamic analysis
47Serkan ÖZGEN
![Page 48: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/48.jpg)
• Messinger model (1953).
• 1-D phase change (Stefan) problem.
• Extended to handle 2 and 3-D problems by Myers (2001).
• Consists of one mass conservation, one phase changeand two energy equations (one for the water and onefor the ice layer).
Ice accretion calculation
48Serkan ÖZGEN
![Page 49: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/49.jpg)
Computed ice shape (wing)
49Serkan ÖZGEN
![Page 50: Aircraft Icing - METU](https://reader030.vdocuments.mx/reader030/viewer/2022012111/61dcba1034fa8555c12fd1f5/html5/thumbnails/50.jpg)
Ice thickness distribution (wing)
50Serkan ÖZGEN