aircraft - ayan · 2010. 8. 28. · bsen 133/62, 12163, 12164, 12167 bs iso en description...
TRANSCRIPT
Aircraft
• Heat Exchange
• Cable Assembly
• Terminals
• Couplers and Connectors
• Valves
Automotive
• Radiators
• Brake Tubing
• Brake Lines
• Air Coolers
• Tubing for Master Cylinder
Electronic
• Connectors
• Printed Circuit Boards
• Sockets
• Lead Frames
• Voltage Rectifiers
Oil and Gas
• Meter Bank
• Water Piping
• Pumps
• Heat Exchangers
• Copper Heat Sinks
4. Industry Applications of Copper
Fastener
• Bolt and Nut
• PCB Terminals
• Insert
• Thread Rolling
• Socket Pins
Semi-Conductor
• Polishing Machine
• Ciruit Board Finishers
• Vibratory Machine
• Fluid Pumps
• Filtration Systems
Mechanical
• Hydraulic Hose
• Bite Type Fittings
• O-Ring Face Seal Fittings
• Crimped Fittings
• Pipe Fittings and Adaptors
Marine
• Boat Hulls
• Heat Exchangers
• Valves
• Shafts and Rudders
• Rope Guide
4. Industry Applications of Brass
Properties of Copper
Copper Physical PropertiesDenisty Melting Point
8.94 (kg / m3) 1085 (ºC)
Copper Mechanical PropertiesCondition 0.2% Proof Tensile Elongation Vickers
Stress Strength % HardnessN / mm2 N / mm2 HV
O - Annealed 60 220 55 45
Half-Hard 325 385 4 115
Elastic Modules Shear Modules Yield Stress Ultimate Stress
110 -120 (GPA) 40-47 (GPA) 55-330 (MPa) 230-380 (MPa)
Copper Thermal PropertiesThermal Expansion Coefficient Thermal Conductivity
(x 10-6 / ºC) (w / m.k )
16.6 – 17.6 410
Copper Electrical PropertiesElectric Resistivity
(x 10 -9 Ω • m )
17
Copper Acoustic PropertiesLongitudinal Wave Velocity (m/s) Shear Wave Velocity (m/s)
4760 / 5010 2325 / 2270
Chemical Compositions of Copper
Copper No. Designation Description Cu As Sb P Te Other NamedElements
C101 OFE Oxygen-Free 99.99 0.0005 0.0004 0.0003 0.0002 0.0005Electron Oxygen
C103 OFXLP Oxygen-Free 99.95 – – 0.001 – –Copper 0.005
C111 ETP Electron 99.90 – – – – –
C109 Cu Te – 99.95 – – – 0.3 0.005Oxygen
C106 Cu-DHP – 99.90 0.05 0.005 0.013 0.01 –
Specification Cross Reference of Copper
Copper Busbar for the Electrical Industry
BSEN 133/62, 12163, 12164, 12167
BS ISO EN Description Uses/Characteristics
C101 Cu-ETP CW004A Electrolytic, tough pitch, Busbar conductors & otherhigh conductivity copper. fabricated electrical components.
C103 Cu-OF CW008A Oxygen free high Oxygen free version of Cu-ETPconductivity copper. for use in reducing atmosphere.
C111 Cu-S CW114C Sulphur copper Added Sulphur gives(free machining). good machining uses.
C109 Cu-TEP CW115C Tellurium copper Added Tellurium gives good(free cutting). machining properties.
ASTM UNS ISO BS EN DIN JIS
B187/Bars C11000 Cu-ETP C101 CW004A E-Cu 57 C1100
Copper Sheet for Industry
BSEN 1172, 1652, 1653, 1654
BS ISO EN Description Uses/Characteristics
C101 Cu-ETP CW004A Electrolytic, tough pitch, Suitable for conductors &high conductivity copper. fabricated electrical components
(but not in red atmosphere).
C103 Cu-OF CW008A Oxygen free high Oxygen free version of Cu-ETPconductivity copper. for use in reducing atmosphere.
C106 Cu-DHP CW114C Phosphorus deoxidised For general & chemicalarsenic free copper engineering, particularly when(suitable for brazing). brazing or welding is involved.
Properties of Brass
Brass Physical PropertiesDenisty Melting Point
8.4 – 8.75 (kg / m3) 930 (ºC)
Brass Mechanical PropertiesCondition Typical 0.2% Proof Tensile Elongation Vickers
Size Stress Strength % Hardness(mm) N / mm2 N / mm2 HV
Extruded 12 to 80 125 to 155 340 to 390 40 to 30 100 to 140
Rolled 75 to 205 125 to 155 340 to 390 40 to 30 100 to 140
Drawn 12 to 80 140 to 185 370 to 430 30 to 20 120 to 160
Sheet O - Annealed 140 370 45 95
Half-Hard 340 400 20 160
Plate Manufactured 170 400 35 110
Elastic Modulus Shear Modulus Yield Stress Ultimate Stress
96 –110 (GPA) 36 –41 (GPA) 70–550 (MPa) 200–620 (MPa)
Brass Thermal PropertiesThermal Expansion Coefficient Thermal Conductivity
(x 10-6 / ºC) (w / m.k )
19.1 – 21.2 117
Brass Electrical PropertiesElectric Resistivity
(x 10 -9 Ω • m )
20 – 61
Brass Acoustic PropertiesLongitudinal Wave Velocity (m/s) Shear Wave Velocity (m/s)
4700 2110
Chemical Compositions of Brass
Brass No. Cu Pb Fe SN As Mn Zn Other namedElements
UNS C36000 60.0% 2.5% 0.35% – – – Reminder –
UNS C38500 55.0% 2.5% 0.35% – – – Reminder –
BS CZ 121 Pb3 58.5% 2.5% – – – – Reminder –
BS CZ 112 63.5% – – 1.4% – – Reminder –
BS CZ 114 58.5% 1.5% 1.0% 0.8% – 2.0% Reminder –
BS CZ 122 58.5% 2.5% 0.3% – – – Reminder –
BS CZ 131 63.0% 2.5% 0.2% – – – Reminder –
BS CZ 132 60.5% 2.8% 0.2% 0.2% 0.15% – Reminder –
BS CZ 101 91.0% 0.05% 0.1% – – – Reminder –
BS CZ 106 71.5% 0.05% 0.05% – – – Reminder –
BS CZ 108 65.0% 0.3% 0.2% – – – Reminder –
Specification Cross Reference of Brass
Brass Rods and Sections
BS ISO EN Description & Uses
CZ121 Pb3 Cu Zn 39 Pb 3 CW614N The most suitable material for high speed machining.Used for turned parts & fasteners.
CZ112 Cu Zn 38 Sn 1 CW712R Naval brass. The addition of tin improves corrosion resistance,especially in sea water.
CZ114 Cu Zn 39 CW721R High tensile brass. Sometimes referred to as Manganese Bronze.Al Fe Mn Used for fasteners, valve parts etc.
CZ122 Cu Zn 40 Pb 2 CW617N Stamping brass. The most popular alloy for hot stamping.The Lead content ensures free cutting characteristics.
CZ131 Cu Zn 37 Pb 2 CW606N The higher copper and lower lead content of the alloy improvesductility while retaining free machining characteristics.Can be used for cold heating, riveting etc.
CZ132 Cu Zn 36 CW602N Dezincification resistant brass. Commonly used in waterPb 2 As applications such as shower valves and taps.
ASTM UNS ISO BS DIN JIS
B16 C38500 Cu- Zn 39 Pb3 CZ 121 Pb3 Cu Zn 39 Pb3 C3603
Brass Sheet
BS ISO EN Description & Uses
CZ101 Cu Zn 10 CW501L Gilding metal used for architectural metalwork,imitation jewellery etc.
CZ106 Cu Zn 30 CW505L 70/30 Brass. Deep drawing and spinning quality.
CZ108 Cu Zn 37 CW508L "Common" Brass, a general purpose alloy suitablefor simple forming etc.
Copper and Brass Coil
We slit any width from 10mm to 550mm. There are no minimum quantities.
T
W
Thickness (T) Width (W) Weight Copper Brass(mm) (mm) E-Cu Cu Zn 37
C1100 C2700F20 Soft F30 Soft
0.20 1219 1 to 7 tons • •0.25 1219 1 to 7 tons • •0.30 1219 1 to 7 tons • •0.40 1219 1 to 7 tons • •0.50 1219 1 to 7 tons • •0.60 1219 1 to 7 tons • •0.70 1219 1 to 7 tons • •0.80 1219 1 to 7 tons • •0.90 1219 1 to 7 tons • •1.00 1219 1 to 7 tons • •1.25 1219 1 to 7 tons • •1.50 1219 1 to 7 tons • •2.00 1219 1 to 7 tons • •2.50 1219 1 to 7 tons • •3.00 1219 1 to 7 tons • •
Thickness Width Length Copper Brass(mm) (mm) (mm)* E-Cu Cu Zn 37
C1100 C2700F20 Soft F30 Soft
0.40 1220 2440 • •1500 3000 • •
0.50 1220 2440 • •1500 3000 • •
0.60 1220 2440 • •1500 3000 • •
0.70 1220 2440 • •1500 3000 • •
0.80 1220 2440 • •1500 3000 • •
0.90 1220 2440 • •1500 3000 • •
1.00 1220 2440 • •1500 3000 • •
1.20 1220 2440 • •1500 3000 • •
Copper and Brass Sheet
.../ con’t on page 13
Thickness Width Length Copper Brass(mm) (mm) (mm)* E-Cu Cu Zn 37
C1100 C27200F20 Soft F30 Soft
1.50/1.60 1220 2440 • •1500 3000 • •
2.00 1220 2440 • •1500 3000 • •
2.50 1220 2440 • •1500 3000 • •
3.00 1220 2440 • •1500 3000 • •
4.00 1220 2440 • •1500 3000 • •
5.00 1220 2440 • •1500 3000 • •
6.00 1220 2440 • •1500 3000 • •
8.00 1220 2440 • •1500 3000 • •
Copper and Brass Sheet
Thickness Width Length Copper Brass(mm) (mm) (mm) E-Cu Cu Zn 37
C1100 C27200hard as rolled hard as rolled
3.00 1220 2440 • •1500 3000 • •4.00 1220 2440 • •1500 3000 • •5.00 1220 2440 • •1500 3000 • •6.00 1220 2440 • •1500 3000 • •8.00 1220 2440 • •1500 3000 • •10.00 1220 2440 • •1500 3000 • •12.00 1220 2440 • •1500 3000 • •13.00 1220 2440 • •1500 3000 • •15.00 1220 2440 • •1500 3000 • •16.00 1220 2440 • •
1500 3000 • •19.00 1220 2440 • •
1500 3000 • •20.00 1220 2440 • •
1500 3000 • •22.00 1220 2440 • •
1500 3000 • •
Copper and Brass Plate
.../ con’t on page 15
25.00 1220 2440 • •1500 3000 • •
28.00 1220 2440 • •1500 3000 • •
30.00 1220 2440 • •1500 3000 • •
32.00 1220 2440 • •1500 3000 • •
35.00 1220 2440 • •1500 3000 • •
38.00 1220 2440 • •1500 3000 • •
40.00 1220 2440 • •1500 3000 • •
45.00 1220 2440 • •1500 3000 • •
50.00 1220 2440 • •1500 3000 • •
55.00 1220 2440 • •1500 3000 • •
65.00 3000 4000 • •80.00 3000 3000 • •
100.00 2000 3000 • •
Thickness Width Length Copper Brass(mm) (mm) (mm) E-Cu Cu Zn 37
C1100 C27200hard as rolled hard as rolled
Copper and Brass Plate
Diameter Diameter Copper Brass(mm) (inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
3.18 0.125 • •3.97 0.156 • •4.76 0.187 • •5.00 0.197 • •6.00 0.236 • •6.35 0.250 • •7.95 0.313 • •8.00 0.315 • •9.52 0.375 • •10.00 0.394 • •11.11 0.437 • •12.00 0.472 • •12.70 0.500 • •14.00 0.551 • •14.29 0.563 • •15.88 0.625 • •16.00 0.630 • •18.00 0.709 • •19.05 0.750 • •20.00 0.787 • •22.00 0.866 • •24.00 0.945 • •25.00 0.984 • •25.40 1.000 • •28.58 1.125 • •30.00 1.181 • •
DCopper and Brass Round Bar
.../ con’t on page 17
Diameter Diameter Copper Brass(mm) (inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
31.75 1.250 • •34.93 1.375 • •35.00 1.378 • •36.00 1.417 • •38.10 1.500 • •40.00 1.575 • •41.27 1.625 • •44.45 1.750 • •47.63 1.875 • •50.00 1.969 • •50.80 2.000 • •53.97 2.125 • •55.00 2.165 • •57.15 2.250 • •60.00 2.362 • •62.00 2.440 • •63.50 2.500 • •65.00 2.559 • •67.00 2.637 • •69.85 2.750 • •70.00 2.756 • •75.00 2.952 • •76.20 3.000 • •80.00 3.150 • •82.55 3.250 • •85.00 3.346 • •
Copper and Brass Round Bar D
.../ con’t on page 18
Copper and Brass Round Bar D
Diameter Diameter Copper Brass(mm) (inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
88.90 3.500 • •90.00 3.543 • •93.00 3.661 • •95.25 3.750 • •
101.60 4.000 • •110.00 4.330 • •114.30 4.500 • •120.00 4.724 • •127.00 5.000 • •130.00 5.118 • •140.00 5.512 • •152.40 6.000 • •165.00 6.496 • •170.00 6.693 • •180.00 7.087 • •203.20 8.000 • •205.00 8.071 • •228.60 9.000 • •254.00 10.000 • •280.00 11.020 • •304.80 12.000 • •310.00 12.204 • •330.00 12.992 • •355.60 14.000 • •375.00 14.764 • •400.00 15.748 • •
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
3 12 • •14 • •15 • •16 • •20 • •25 • •30 • •35 • •40 • •45 • •50 • •60 • •65 • •
1/8” 0.5” • •5/8” • •
0.75” • •1” • •
1.25” • •1.5” • •
1.75” • •2” • •
2.5” • •3” • •
3/16” 0.5” • •5/8” • •
0.75” • •1” • •
1.25” • •1.5” • •
1.75” • •2” • •
2.5” • •3” • •
3.5” • •5 10 • •
12 • •14 • •15 • •16 • •20 • •
Copper and Brass Flat BarW
T
.../ con’t on page 20
5 25 • •30 • •32 • •35 • •40 • •45 • •50 • •60 • •65 • •70 • •75 • •80 • •90 • •100 • •
1/4” 0.5” • •5/8” • •0.75” • •
1” • •1.25” • •1.5” • •1.75” • •
2” • •2.5” • •3” • •
3.5” • •4” • •
6 10 • •12 • •14 • •15 • •16 • •20 • •25 • •30 • •32 • •35 • •40 • •45 • •50 • •60 • •65 • •
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
Copper and Brass Flat BarW
T
.../ con’t on page 21
6 70 • •75 • •80 • •90 • •100 • •
5/16” 0.75” • •1” • •
1.25” • •1.5” • •
1.75” • •2” • •
2.5” • •3” • •
3.5” • •4” • •
8 12 • •15 • •16 • •20 • •25 • •30 • •32 • •35 • •40 • •45 • •50 • •60 • •65 • •70 • •75 • •80 • •90 • •100 • •
3/8” 0.75” • •1” • •
1.25” • •1.5” • •
1.75” • •
Copper and Brass Flat Bar
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
W
T
.../ con’t on page 22
3/8” 2” • •2.5” • •3” • •
3.5” • •4” • •5” • •6” • •
10 15 • •20 • •25 • •30 • •32 • •35 • •40 • •45 • •50 • •60 • •65 • •70 • •75 • •80 • •90 • •100 • •110 • •120 • •125 • •150 • •
12 20 • •25 • •30 • •32 • •35 • •40 • •45 • •50 • •60 • •65 • •70 • •75 • •
Copper and Brass Flat Bar
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
W
T
.../ con’t on page 23
12 80 • •90 • •100 • •110 • •120 • •125 • •150 • •
1/2” 0.75” • •1” • •
1.25” • •1.5” • •
1.75” • •2” • •
2.5” • •3” • •
3.5” • •4” • •5” • •6” • •
5/8” 1” • •1.25” • •1.5” • •
1.75” • •2” • •
2.5” • •3” • •
3.5” • •4” • •5” • •6” • •
16 25 • •30 • •32 • •35 • •40 • •45 • •50 • •60 • •
Copper and Brass Flat Bar
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
W
T
.../ con’t on page 24
16 65 • •70 • •75 • •80 • •90 • •100 • •110 • •120 • •125 • •150 • •175 • •200 • •
3/4” 1” • •1.25” • •1.5” • •1.75” • •
2” • •2.5” • •3” • •
3.5” • •4” • •5” • •6” • •
20 25 • •30 • •32 • •35 • •40 • •45 • •50 • •60 • •65 • •70 • •75 • •80 • •90 • •100 • •110 • •120 • •
Copper and Brass Flat Bar
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
W
T
.../ con’t on page 25
20 125 • •150 • •175 • •200 • •
25 30 • •32 • •35 • •40 • •45 • •50 • •60 • •65 • •70 • •75 • •80 • •90 • •100 • •110 • •120 • •125 • •150 • •175 • •200 • •
1” 1.25” • •1.5” • •
1.75” • •2” • •
2.5” • •3” • •
3.5” • •4” • •5” • •6” • •
30 50 • •60 • •65 • •70 • •75 • •80 • •
Copper and Brass Flat Bar
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
W
T
.../ con’t on page 26
30 90 • •100 • •110 • •120 • •125 • •150 • •175 • •200 • •
1.25” 2” • •2.5” • •3” • •
3.5” • •4” • •5” • •6” • •
35 50 • •60 • •65 • •70 • •75 • •80 • •90 • •100 • •110 • •120 • •125 • •150 • •175 • •200 • •
40 125 • •150 • •175 • •200 • •
Copper and Brass Flat Bar
Thickness Width Copper Brass(mm/inches) (mm/inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
W
T
Copper and Brass Square Bar
Across Flats Across Flats Copper Brass(mm) (inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
5.00 0.20 • •6.00 0.24 • •6.35 0.25 • •8.00 0.32 • •9.52 0.38 • •10.00 0.39 • •12.00 0.47 • •12.70 0.50 • •16.00 0.63 • •19.05 0.75 • •20.00 0.78 • •22.22 0.87 • •25.00 0.98 • •25.40 1.00 • •30.00 1.18 • •31.75 1.25 • •32.00 1.26 • •35.00 1.38 • •38.00 1.50 • •40.00 1.60 • •44.45 1.75 • •50.00 2.00 • •57.15 2.25 • •60.00 2.36 • •63.50 2.75 • •65.00 2.59 • •69.85 2.75 • •76.20 3.00 • •80.00 3.14 • •82.55 3.25 • •88.90 3.50 • •90.00 3.54 • •95.25 3.75 • •
100.00 3.94 • •101.60 4.00 • •
T
Across Flats Across Flats Copper Brass(mm) (inches) E-Cu 57 Cu Zn 39 Pb3
C11000 C38500
9.53 0.375 • •13.34 0.525 • •15.27 0.601 • •18.03 0.710 • •19.05 0.750 • •20.83 0.820 • •22.23 0.875 • •23.37 0.920 • •24.00 0.945 • •25.65 1.010 • •28.58 1.125 • •30.48 1.200 • •31.75 1.250 • •33.05 1.300 • •34.92 1.374 • •37.59 1.479 • •38.10 1.500 • •40.00 1.600 • •42.42 1.670 • •44.45 1.750 • •47.63 1.875 • •50.80 2.000 • •57.15 2.250 • •63.50 2.500 • •69.85 2.750 • •76.20 3.000 • •
TCopper and Brass Hexagonal Bar
Across Flats Copper Brass(mm) SF-Cu Cu Zn 39 Pb3
C12200 C38500
20 x 20 x 3 • •25 x 25 x 3 • •25 x 25 x 5 • •25 x 25 x 6 • •30 x 30 x 3 • •30 x 30 x 4 • •30 x 30 x 5 • •30 x 30 x 6 • •40 x 40 x 3 • •40 x 40 x 4 • •40 x 40 x 5 • •40 x 40 x 6 • •50 x 50 x 3 • •50 x 50 x 4 • •50 x 50 x 5 • •50 x 50 x 6 • •60 x 60 x 6 • •65 x 65 x 6 • •65 x 65 x 8 • •
65 x 65 x 10 • •75 x 75 x 6 • •75 x 75 x 8 • •
75 x 75 x 10 • •75 x 75 x 12 • •100 x 100 x 6 • •100 x 100 x 8 • •100 x 100 x 10 • •100 x 100 x 12 • •
Copper and Brass Equal Angle Bar
Dimensions (mm) Copper BrassThickness x Flange x Web E-Cu 57 Cu Zn 39 Pb3
[ (B) x (H) x (t) ] C11000 C38500
40 x 20 x 3 • •50 x 25 x 3 • •80 x 40 x 5 • •
100 x 50 x 6 • •130 x 65 x 6 • •150 x 75 x 6 • •
200 x 100 x 10 • •
Copper and Brass U Channels
DT
Wall Outside Copper BrassThickness Diameter SF-Cu Cu Zn 39 Pb3
(mm) (mm) C12200 C38500
0.6 12.70 • •19.10 • •22.20 • •25.40 • •
0.8 12.70 • •19.10 • •22.20 • •25.40 • •31.80 • •38.10 • •50.80 • •
1.0 12.70 • •19.10 • •22.20 • •25.40 • •31.80 • •38.10 • •50.80 • •
1.2 12.70 • •19.10 • •22.20 • •25.40 • •31.80 • •38.10 • •50.80 • •63.50 • •76.20 • •
Copper and Brass Round Tube
.../ con’t on page 32
DT
Wall Outside Copper BrassThickness Diameter SF-Cu Cu Zn 39 Pb3
(mm) (mm) C12200 C38500
1.5 12.70 • •19.10 • •22.20 • •25.40 • •31.80 • •38.10 • •50.80 • •63.50 • •76.20 • •
2.0 25.40 • •31.80 • •38.10 • •50.80 • •63.50 • •76.20 • •
2.5 25.40 • •31.80 • •38.10 • •50.80 • •63.50 • •76.20 • •
3.0 25.40 • •31.80 • •38.10 • •50.80 • •63.50 • •76.20 • •
3.5 25.40 • •31.80 • •38.10 • •50.80 • •63.50 • •76.20 • •
Copper and Brass Round Tube
Outside Wall Copper BrassDimension Thickness SF-Cu Cu Zn 39 Pb3
(mm) (mm) C12200 C38500
19.05 1.0 • •1.2 • •1.5 • •1.6 • •
25.40 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
31.75 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
38.10 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
W
T
Copper and Brass Square Tube
.../ con’t on page 34
Outside Wall Copper Brass
Dimension Thickness SF-Cu Cu Zn 39 Pb3
(mm) (mm) C12200 C38500
40.00 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
50.80 1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •3.5 • •
60.00 1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
76.20 2.0 • •3.0 • •3.5 • •
101.60 2.0 • •3.0 • •3.5 • •
W
T
Copper and Brass Square Tube
Outside Wall Copper BrassDimension Thickness SF-Cu Cu Zn 39 Pb3
(mm) (mm) C12200 C38500
24.0 X 14.0 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
40.0 X 18.0 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
40.0 X 25.0 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
50.8 X 25.4 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
Copper and Brass Rectangular Tube
W2
T
W1
.../ con’t on page 36
Outside Wall Copper BrassDimension Thickness SF-Cu Cu Zn 39 Pb3
(mm) (mm) C12200 C38500
60 X 40.0 1.0 • •1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
80.0 X 40.0 1.2 • •1.5 • •1.6 • •2.0 • •3.0 • •
100.0 X 50.8 1.5 • •1.6 • •2.0 • •3.0 • •5.0 • •
Copper and Brass Rectangular Tube
W2
T
W1