air compressors and vacuum pumps oilless rocking piston air compressors and vacuum pumps, available...
TRANSCRIPT
F-15 5-08
AIR COMPRESSORS AND VACUUM PUMPSwww.gastmfg.comwww.idex-hs.com
Rocking Piston
�
AIR COMPRESSORS • VACUUM PUMPS
Rocking PistonGast oilless Rocking Piston air compressors and vacuum pumps, available in standard, twin, and
miniature styles, make them the perfect choice for hundreds of applications. Air flow capabilities from 3.4 lpm to 5.5 cfm (9,35 m3/h) are available as are vacuum capabilities up to 29 in. Hg (31 mbar) and pressure to 175 psig (12 bar). Choose from dual frequency, shaded pole, and permanent split capacitor (psc) electric motors with AC multi-volt-ages available for worldwide applications as well as 6, 12, and 24 volt DC models in brush and brushless types. Horsepowers range from 1/20 to 1/2 HP (0,04 to 0,37 kW). Tank models and a complete line of recommended acces-sories are also available.
Here’s how our Rocking Piston performance compares with that of our other popular positive displacement vacuum pumps and compressors. Use these charts to see if a Rocking Piston pump is the right choice for your application.
Why use a Rocking Piston pump?The rocking piston combines the best characteristics of piston and diaphragm air compressors into a small unit with exceptional performance. Pressure to 175 psi, 12, 0 bar. Units as light as 7 pounds 3.2 kg. Tank-mounted units, DC powered models. AC motors to match North American, European and worldwide power supplies.
Because Gast ROC-R pumps are oil-free, they are ideal for use in applications in laboratories. Hospitals and the food industry where oil mist combination in undesirable.
These pumps are made to stand up through years of use. The piston rod and bearing assembly are bonded together, not clamped; they will not slip, loosen or misalign to cause trouble.
Typical Applications▪ Oxygen Concentrators
▪ Beverage Dispensing
▪ Body Fluid Analysis▪ Automotive Suspension▪ Dental Vacuum Ovens▪ Vacuum Frames▪ Core Drilling
Product and Application Information
The units that we list in this catalog are a small portion of what we actually make. Those listed are considered “standard units” and are normally available from stock in small quantities. Variations are produced for many customers and by passing on to us the appli-cation specifications we might find an existing unit that fits your requirement. If we don’t and the quantity is sufficient, we will design a “special unit” for the application.
Pictorial and dimensional data is subject to change without notice.
The information presented in this catalog is based on technical data and test results of nominal units. It is believed to be accurate and is offered as an aid in the selection of Gast products. It is the user’s responsibility to determine suitability of the product for intended use and the user assumes all risk and liability what-soever in connection therewith.
Piston
RockingPiston
Rotary Vane
Diaphragm
Linear
FreeAirFlow MaximumPressure MaximumVacuum
CFM 0 5 10 15 20 25
m3/h 0 10 20 30 40
PSI 0 50 100 150 200
bar 0 2 4 6 8 10 12
HG 0 5 10 15 20 25 30
mbar 1000 800 600 400 200 0
112CFM
Gast Manufacturing Inc., A Unit of IDEX Corporation, Benton Harbor, MI USA ・ ph 269-926-6171 ・ fax 269-925-8288 ・ www.gastmfg.com・Registered Trademark/・Trademark of Gast Manufacturing Inc., Copyright ・2007 Gast Manufacturing Inc. All rights reserved.
�
In reciprocating motion, a flexible cup mounted on top of the connecting rod creates vacuum or pressure as the cup maintains a seal against the cylinder walls in a rocking motion.
Product and Application InformationUnit Life Expectancy
The figures stated in this catalog are nominal ap-proximations for models without accessories. Intake filters and exhaust mufflers, and the accumulation of contaminants in them during operation, will decrease the flow of air as well as the achievable pressure.
Continuous vs. Intermittent OperationContinuous vs. intermittent duty usually must be considered. Duty usually must be considered. Our definition of intermittent duty is 10 minutes or less on and 10 minutes or more off. Here again we are dealing with a very general statement. A better method of deter-mining if the unit is applied properly is to measure temperatures of the metal portion of the unit that surrounds the discharge port and top dead center of the electric motor. Please note that when you refer to performance curves in this catalog, the solid line indicates continuous operation, while the dashed line shows intermittent duty.
In systems where storage of built-up vacuum is important, check valves should be installed between the pump and the system.
European Community’s Machinery DirectiveGiven its international perspective, Gast has also pledged to conform to the European Community’s Machinery Directive, a safety certification program for all products targeted for marketing in the Euro-pean Community. Currently, all Gast products sold in the European Community are in compliance and include a Declaration Certificate.
Starting Under LoadROC-R® units will not start under load because the surface area of the piston is much larger than that of a piston pump. To start a ROC-R® unit un-der load would require a motor too powerful to be cost effective. Instead, a specific volume of air at zero pressure differential must be provided to start the unit under load. (Specific volumes for different models are available from Gast.) Bleed orifices and dump valves are two common methods of supplying the correct zero-pressure-differential volume of air.
Installation It is important to include a vacuum gauge at the vacuum pump inlet or a pressure gauge at the compressor discharge in the air line within a few inches of the unit. Diagnosis of sys-tem problems is easier and more accurate with a gauge at this location. In reciprocating units, a “snubber” should be installed in the gauge con-nection to reduce pulsations which can damage the gauge.
The installation of a relief valve is equally im-portant. Unit life is directly related to duty levels and most systems require only a fraction of the pump’s advertised capacity to operate efficiently. The Gast (optional) relief valve makes it simple to “fine tune” the pump to minimum system needs, reducing electrical consumption and maximizing pump life.
Catalog Performance SpecificationsThe specifications listed are that of a unit at sea level with an ambient temperature of 70°F (21°C), operating with normal electrical current conditions.
Many variables determine the life expectancy of a unit. Among them are:
1. Ambient temperature
To determine the ambient temperature reading of the air surrounding the unit, readings should be taken around the unit approximately 4 inches away. Gast’s guarantee applies only to units oper-ating within a temperature range of 32oF (OoC) to 100oF (38oC). Low temperature affects the unit’s ability to start and high temperatures affect its life. Contact the factory for authorization of unusual ambient conditions.
2. Duty level
3. Operating cycle
4. Operating speed
5. Condition of air handled • Cleanliness • Humidity • Heat • Chemical vapors present (corrosive, noncorrosive)
6. Unit maintenance • Lubrication (if required) • Filter maintenance • Muffler maintenance
Electric MotorsAll electric motors supplied with Gast rocking piston pumps are designed to operate at plus or minus 10% of nameplate voltage. Motors to meet special requirements are available upon request. Various brand-name motors are furnished on any model at the discretion of Gast.
How does a Rocking Piston pump work?
This catalog presents the models primarily in ascending order of free air flow,.
The table below will assist you in locating a particular model or series.
Product and Application Information
POWERRATING FREEAIRFLOW MAXIMUM MAXIMUMMODEL/ @60Hz cfm m3/h PRESSURE VACUUMSERIES hp kW 50Hz 60Hz 50Hz 60Hz psi bar "Hg mbar
8R (DC) - - 3.4 lpm 22.5 1,55 17 43820R (AC)
1/30 0,025 14 lpm 35 2,41 21 30230R (DC)
1/30 0,08 0.61 1,04 120 8,2834R(DC)
1/10 0,175 0.08 1,36 200 13,8 --- 55R (PSC•) 1/20 0,04 .16 .25 0,27 0,34 30 2,1 24 20055R (DC) 1/10 0,07 .25 0,42 30 2,1 24 200LOA (ShP••) 1/16 0,05 — .50 — 0,85 100 6,9 24 200LOA (PSC•) 1/6 0,12 .52 .83 0,88 1,41 100 6,9 26 133LOA (DC) 1/10 0,07 .62 1,05 100 6,9 27 99LAA 1/6 0,12 1.5 1.5 2,55 2,55 50 3,5 29 31SAA (Staged) 1/6 0,12 — 1.75 — 2,97 — — 29.5 14SAA (Parallel) 1/6 0,12 — 3.30 — 5,60 — — 27 99SAA 1/6 0,12 — 1.95 — 3,31 30 2,1 — —ROA (ShP••) 1/8 0,09 1.1 1.25 1,87 2,12 100 6,9 26 133ROA (PSC•) 1/4 0,19 1.5 1.60 2,55 2,72 100 6,9 27 99ROA (DC) 1/8 0,09 1.5 2,55 — — 26 133RAA 1/4 0,19 2.5 2.7 4,25 4,59 100 6,9 27.5 8271R/72R (1 Cyl.) 1/3 0,25 2.1 2.4 3,57 4,07 100 6,9 — —71R/72R (2 Cyl.) 1/3 0,25 5.5 5.5 9,35 9,35 25 1,7 29 3171R (2 Cyl.) 1/2 0,37 1.7 2.0 2,89 3,40 175 12 — —74R 1/4 0,19 1.30 1.5 2,21 2,55 100 6,9 — —75R 1/3 0,25 4.5 5.1 7,65 8,67 40 2,8 27 9981R (2 Cyl) 1/3 0,25 3.5 4.0 5,90 6,80 100 6,9 — —82R (2 Cyl) 1/3 0,25 4.0 4.0 6,80 6,80 30 2,1 — —82R(DC) (2 Cyl) 1/3 0,25 3.2 3.9 5,4 6,60 30 2,1 25 16785R 1/3 0,25 3.7 3.7 6,29 6,29 30 2,1 — —PSC – Permanent Split Capacitor motor ••ShP – Shaded Pole motor
�
Miniature Rocking Piston8R1110 Series
Optional cover shown on unit
Note: Use #6 ®Plastite Thread Forming Screw ®Plastite is a registered trademark of REMINC(RESEARCH ENGINEERING & MANUFACTURING)
Oilless Miniature Rocking Piston to 3.4 lpm
Product Performance (U.S./Imperial, Metric) Note: Performance data taken at nominal voltage
5
4
3
2
1
020 15 10 5 0 5 10 15 20 25
Inch hg psig
400 500 600 700 800 900 1000mbar
0 0,5 1,0 1,5 bar
PRESSUREVACUUM
FREE
AIR
Flo
W
lpm
Model Motor Wt. Number Type Amp. Draw Valve Material lbs. kg
8R1110-201-1049 12 V DC 0.60 ®Neoprene 0.5 0,238R1110-201-1048 24 V DC 0.30 ®Neoprene 0.5 0,238R1110-101-1050 6 V DC 1.1 *®EPDM 0.5 0,238R1110-101-1049 12 V DC 0.60 *®EPDM 0.5 0,23 8R1110-101-1048 24 V DC 0.30 *®EPDM 0.5 0,23
3.4387,1
1.2632,0
2.1454,4
1.9449,3
0.5514,0
1.2632,0
10 X 32 threaded female portsoptional, consult factory
Standard lead length 10". For options, contact factory
.8722,1
.6817,3
.205,1
2x .13
3,3both sides
For ø .1875 I.D. hose
Product Dimensions (Inches, mm)
DC MOTOR22.5 PSI MAX. PRESSURE, 17" HG MAX. VACUUM 3.4 LPM OPEN FLOW
PRODUCT FEATURES
• Use as compressor or vacuum pump (same model)• Maintenance-free ball bearings are sized for long life• Cup and valve are easily field serviceable, if required• Alternate stroke options available• Custom mounting configurations available• Head mounts in any of four positions• Heads available with threaded or barbed ports• Motor equipped with Electromagnetic Interference (EMI)
Suppression
MATERIALS OF CONSTRUCTION
• Head assembly of chemical and heat resistant PPS for corrosion resistance
• EPDM (Ethylene Propylene Diene Monomer) valve and Neoprene valves
Product Specifications
�
4.34110,32
3.0276,71
INLET PORT
OUTLET PORT
3.6392,15
3.55 90,17
.389,65
1.37 34.80
2.0953,09
1.8446,74
5.39 137,01
AC MOTOR31 PSI MAX. PRESSURE, 20,5” HG MAX. VACUUM 14,7 LPM OPEN FLOW (20R125-101-C400ASX, 60 HZ ) *35 PSI MAX. PRESSURE, *21” HG MAX. VACUUM *12,0 LPM OPEN FLOW (20R126-101-C400CSX, 50 HZ)
PRODUCT FEATURES• Oilless operation• Excellent compressor life with full ball bearing construction• Single shot thermal and current cutoff protection• For use as a compressor or vacuum pump (same model)• Alternate head mounting position available
Miniature Rocking Piston 20R Series
Product Performance (U.S./Imperial, Metric)
Product Dimensions (Inches, mm)
Product Specifications Net Wt. Model Number Motor Type Amp Draw RPM HP kw lbs. kg
20R125-101-C400ASX 120V/60-1 AC 1.5 3000 1/30 .025 2.40 1,09
20R125-101-C400CX 230V/50-1 AC 0.8 2500 1/30 .025 2.48 1,18
Oilless Miniature Rocking Piston to 14,7
8
6
4
2
00 5 10 15 20 25 30
psig
0 0,5 1,0 1,5 2,0bar
10
12
14
PRESSURE
35
2,5
lpm
FREE
AIR
Flo
W
40 45
3,0
16
20 15 1030 525inch hg
VACUUM
0 200 400 600 800 1000mbar
*Preliminary data - consult factory for further details
50 hZ
8
6
4
2
00 5 10 15 20 25 30
psig
0 0,5 1,0 1,5 2,0bar
10
12
14
PRESSURE
35
2,5
lpm
FREE
AIR
Flo
W
40 45
3,0
16
20 15 1030 525inch hg
VACUUM
0 200 400 600 800 1000mbar
*Preliminary data - consult factory for further details
60 hZ
�
Product Performance (Imperial, Metric)
DC MOTOR120 PSI MAX. PRESSURE, INTERMITTENT 0.61 CFM OPEN FLOW
PRODUCT FEATURES • Oilless operation• Customer specific mounting configurations available• 10% duty cycle (1 minute ON, 9 minutes OFF)• Long-life cup material• Custom exhaust port locations available
Oilless Rocking Piston Compressor to .61 cfm
Rated Current at Avg. Full Load Net Wt. Model Number Motor Rated Load (Amps) Speed (RPM) HP kw lbs. kg
30R157-P101-L200 12 Volt DC 8.0 3800 1/10 0,08 1.7 0.8
Product Specifications
Product Dimensions (Inches, mm)
5.50139,7
1.5038,1
4.88124,0
2.6767,8
Outlet port 1/4 NPT
Inlet port 2 x ø.28 7,0
.9624,5
1.9349,0
1.6341,5
2.3760,3
1.1930,1
.5012,8
1.0125,6
Miniature Rocking Piston 30R Series
Duty cycle: At 120 psig, pump is rated for 10% duty (1.0 minutes on, 9.0 minutes off)
.50
.40
.30
.20
00 20 40 60 100 120
psig
0 2,0 4,0 6,0 8,0bar
.60
PRESSURE
FREE
AIR
Flo
W
10.0
5.0
0
lpm
15.0
cfm
80
.10
20.0 .70
�
1.93
49,00
1/4 - 18 NPT Outlet
1/8 - 27 NPT Inlet
2.46
62,561.23
31,28
2.50
63,50
6.95
176,55
2 x .35
9,00
3.11
79,0
3.93
99,904.39
111,40
7.92
201,09
2.19
55,60
5.81
147,49
6.29
159,90.45
11,40
2 x 3.54
90,0
4 x .50 thru
12,7
Miniature Rocking Piston 34R Series
1.0
.75
.50
.25
0
cfmm3/h
FR
EE
AIR
FL
OW
2,0
0,8
0,4
00 50 100 200 psi
0 12 15 bar
150
1,2
1,6
3 96
250
18
Oilless Rocking Piston Compressor to 0.8 cfm
PRESSURE
DC MOTOR200 PSI MAX. PRESSURE, INTERMITTENT 0.8 CFM OPEN FLOW
PRODUCT FEATURES• Oilless operation• Motor Mounted• All wetted aluminum parts for corrosion resistance• IP68 rating available• Thermal overload protector• 4-way reversible head• Optional standard NPT inlet and exhaust port head• VG2016 sintered bronze inlet silencer• Robust intermittent duty cycle• Bulk or individual pack available
Product Performance (U.S./Imperial, Metric)
*Accessorized unit includes: braided hose with check valve, vibration isolators and mounting hardware
Product Specifications
Product Dimensions (Inches, mm)
Duty cycle: At 150 psig, pump is rated for 30% duty (4.5 minutes on, 10.5 minutes off)
Rated Current at Avg. Full Load Net Wt. Model Number Motor Rated Load (Amps) Speed (RPM) HP kw lbs. kg
34R156-P101-L100x 12 Volt DC 13.0 2750 1/4 0,175 6.5 3,0
*34R156-P160-L100X 12 Volt DC 13.0 2750 1/4 0,175 7.0 3,2
�
FREE
AIR
Flo
W
0.30
0.25
0.20
0.15
0.10
0.05
0
0,5
0,4
0,3
0,2
0
0,1
25 20 15 10 5 0 5 10 15 20 25 30 35 40 45Inch hg psig
200 400 600 800 1000Metric (mbar)
0 0,5 1,0 1,5 2,0 2,5 3,0Metric (bar)
m3/h cfm
A A
BB
CC
bRUSHLESS DC MOTOR 30 PSI MAX. PRESSURE CONTINUOUS (45 PSI INTER.) 24" HG MAX. VACUUM 0.25 CFM OPEN FLOW (EACH HEAD)
PSC MOTOR 30 PSI MAX. PRESSURE CONTINUOUS (45 PSI INTER.) 24" HG MAX. VACUUM 0.20 CFM OPEN FLOW (EACH HEAD)
PRODUCT FEATURES• Pressure/vacuum simultaneously in a very small package• Very low noise levels approx. 55 dB(a)• All wetted aluminum parts treated for corrosion protection
from moisture• Very low power consumption
(approx. 75 watts – AC version, 50 watts – DC version)• Long life/non-service life (up to 12,000 hours depending
on application)
RECOMMENDED ACCESSORIES• Repair kit part #K531• Vacuum gauge AA640• Vacuum relief valve AA204• Pressure gauge AA644B• Pressure relief valve AA203• Filter/Muffler pressure VG2016• Filter/muffler vacuum AA922H
Product Specifications
55R Series
BLDC Unit
AC Unit
Product Dimensions (Inches, mm) AC UNIT
VACUUM PRESSURE
Product Performance (Metric, U.S. Imperial)
A 24 Volt DC B 1575 rpm C 1275 rpm
Note: Pressure flow with one head running at max. vac. Vacuum flow with one head running at 30 psi.
Dashed lines indicate intermittent duty
1.4437
.4411VACUUM
HEAD
PRESSUREHEAD
1.9549 .95
24
3.0076
3.33857.35
1871/8 NPT (4)
4.821224.02
102
2.6367
.28ø 7
.092.3
3.8197
3.0778
2.07
53
5.20132
THRU (4)
Front TopSide
3.0076
3.64927.02
178
PRESSURE
1.4437
.4411VACUUM
HEAD
HEAD 1.9549 .95
24
3.81
1/8 NPT (4)
4.821224.02
102
2.6367
.28ø 7
.092.3
973.0778 2.07
53
THRU (4)
Front TopSide
BLDC UNIT
Oilless Miniature Rocking Piston 0.25 cfm lpm
*Speed can be varied by customer supplied electronics Note: These units can be configured for either staged vacuum or parallel pressure operation. Staged vacuum units capable of 27.5" Hg maximum vacuum. Parallel pressure units capable of 20 psi continuous duty (approx. twice the flow shown in graphs
Motor RPM Net Wt. Model Number Motor Type 60 Hz 50 Hz HP kw lbs. kg
55R720-101-TKP 24 Volt Brushless DC 1900* . 10 0,07 5.0 2,25
55R720-101-STP 100-110/100-115V, 50/60-1 PSC (4 Pole) 1575 1275 .054 0,04 5.0 2,25
�
1.7544,45
1.7544,45
2.1253,85
1/4 NPT Outlet
1/4 NPT Inlet
9.15232,41
5.10129,54
4.28108,71
5.97151,64
5.56141,22
#10-32 UNF-2B
#10-32 THRU (2)
.358,89
.8120,571.62
41,15
1/4 NPT Outlet
1/4 NPT Inlet
#10-32 THRU (2)2.1253,85
4.60116,84
#10-32 UNF-2B x.50 DEEP
1.7544,45
1.7544,45
5.71 APPROX145,03
5.97151,64
5.57141,48
.8120,571.62
41,157.98 APPROX202,70
.358,902.14
54,4
LOA Series
SHADED POLE MOTOR90 PSI MAX. PRESSURE, 25" HG MAX. VACUUM .38 CFM OPEN FLOW
PSC MOTOR100 PSI MAX. PRESSURE, 26" HG MAX. VACUUM .83 CFM OPEN FLOW
DC MOTOR100 PSI MAX. PRESSURE, 27" HG MAX. VACUUM .62 CFM OPEN FLOW
PRODUCT FEATURES
• Oilless Operation• Motor Mounted• Rugged construction / low maintenance• Low noise levels
INCLUDES• Capacitor AG331 (HB, HD motors) AF485A (NL motor) AH364 (NQ motor)
RECOMMENDED ACCESSORIES• Muffler/filters AH190• Pressure gauge AF583 / Vacuum gauge AA640• Pressure relief valve AF592S / Vacuum relief valve AA207 • (3) Rubber feet AF584A• Repair Kit K476
AC Models (capacitor shipped unattached)
DC Models
Oilless Miniature Rocking Piston to .83 cfm
Product Dimensions (Inches, mm).
10
Product Specification "P" models are
Model Motor RPM Number Motor Type 60 Hz 50 Hz HP kW lbs. kg LOA-101-AA 115-60-1 Shaded pole 1575 -- 1/16 0,05 6.6 3,0 LOA-101-HB 115/110-60/50-1 PSC 1575 -- 1/16 0,05 8.6 3,9 LOA-101-HD 230/220-60/50-1 PSC 1575 1275 1/16 0,05 8.6 3,9 LOA-101-NL 100-50/60-1 PSC 1575 1275 1/8 0,09 7.6 3,5 LOA-P103-NL 100-50/60-1 PSC 1575 1275 1/6 0,12 7.6 3,5 LOA-P102-NQ 115-60-1 PSC 1575 1275 1/6 0,12 7.6 3,9 LOA-101-JR 11-15 Volt DC 2000 -- 1/10 0,07 6.6 3,0
.4
.2
020 40 60 80 100
m /h
1 5 6
PRESSURE3
1,4
bar
cfm
psig
7
0,6
0,4
0,2
2 3 4
015202530 10
VACUUM
5
1 0400 600 8002001000
.6
.8
0,8
1,2
1.01,6
0
LOA-P102-NQLOA-P103-NLLOA-101-JRLOA-101-NLLOA-101-HB/HDLOA-101-AA
LOA-101-JRLOA-101-HB/HDLOA-101-AA
60 Hz
1,0
.4
.2
020 40 60 80 100
m /h
1 5 6
PRESSURE3
bar
cfm
psig
7
0,6
0,5
0,4
2 3 4
015202530 10
VACUUM
5
1 0400 600 8002001000
.6
0,8
1,0
0
LOA-101-HB/HD
50 Hz
.1
.3
.5 LOA-P103-NLLOA-101-NLLOA-101-HB/HD
Oilless Miniature Rocking Piston to .83 cfm
Product Performance (U.S./Imperial, Metric)
11
LAA Series
1.6241,15
.8120,57
6.01152,65
5.60142,24
1/4 NPT Outlet
.35 8,91.75
44,452.1454,35 5.71 Approx.
145,03
2.1253,85 4X
#10-32 Thru
1/4 NPT Inlet
1.7544,455.50
139,709.75247,65
PSC MOTOR60 PSI MAX. PRESSURE, 29" HG MAX. VACUUM 1.5 CFM OPEN FLOW
PRODUCT FEATURES
• Oilless Operation• Motor Mounted• Rugged construction / low maintenance• Low noise levels
INCLUDES
• Capacitor AH364
RECOMMENDED ACCESSORIES
• Muffler/filters AH190• Pressure gauge AF583 / Vacuum gauge AA640• Pressure relief valve AF592S / Vacuum relief valve AA207A • (4) Rubber feet AF584A• Repair Kits: K767, K773 (LAA-101-NQ, LAA-V103-NQ K767 (LAA-V104-NQ)
Oilless Miniature Rocking Piston to 1.5 cfm
Product Specification "V" models are vacuum only
Model Motor Staged/ RPMNumber Motor Type Parallel 60 Hz 50 Hz HP kW lbs. kg1LAA-101-NQ 100-60/50-1;115-60-1 PSC Parallel 1575 1275 1/6 0,12 11,3 5,1 1LAA-V103-NQ 100-60/50-1;115-60-1 PSC Parallel 1575 1275 1/6 0,12 11,3 5,11LAA-V104-NQ 100-60/50-1;116-60-1 PSC Staged 1575 1275 1/6 0,12 11,3 5,1
Product Dimensions (Inches, mm)
1�
Product Performance (U.S./Imperial, Metric)
.4
.2
020 40 60 80 100
m /h
1 5 6
PRESSURE3
2,0
bar
cfm
psig
72 3 4
015202530 10
VACUUM
5
1 0400 600 8002001000
.8
0,5
1,0
1,5
1.62,5
0
LAA -101-NQ
LAA -V103-NQLAA -101-NQLAA -V104-NQ
�0 Hz
1.4
1.2
1.0
.6
.4
.2
020 40 60 80 100
m /h
1 5 6
PRESSURE3
2,0
bar
cfm
psig
72 3 4
015202530 10
VACUUM
5
1 0400 600 8002001000
.8
0,5
1,0
1,5
1.62,5
0
LAA -101-NQ
LAA -V103-NQLAA -101-NQLAA -V104-NQ
�0 Hz
1.4
1.2
1.0
.6
Oilless Miniature Rocking Piston to 1.5 cfm
1�APPROX. 6 FOOT LONG CORD ASM.NEMA 5-15P, 15A, 125 V PLUG
4 x #10-32 UNF-2B THRU
9.73247,14
5.49139,0
2.1253,85
1.7243,61 5.61
142.42
2 x 3.50 88,9
.35 TYP.8,89
6.79172,47
6.38162.05
.8120,58
.8120,58
SAA SeriesPSC 4 POLE MOTOR30 PSI MAX. PRESSURE, 29.5" HG MAX. VACUUM 3.0 CFM OPEN FLOW
PRODUCT FEATURES
• Oilless Operation• Motor Mounted• Rugged construction / low maintenance• Low noise levels
INCLUDES
• Capacitor AH364
RECOMMENDED ACCESSORIES
• Muffler/filter AH190• Pressure gauge AF583/Vacuum gauge AA640• Pressure relief valve AA205/Vacuum relief valve AA207• (4) Rubber feet AF584A• Repair kit(s): SAA-P107-NQ, SAA-V108-NQ - 1 each K756,K757 SAA-V109-NQ - 2 each K757
Standard units ship with grilles covering fans
Oilless Miniature Rocking Piston to 3.0 cfm
4 x #10-32 UNF-2B THRU
APPROX. 6 FOOT LONG CORD ASM.NEMA 5-15P, 15A, 125 V PLUG
5.49139,0
2.1253,85
9.73247,14
.8120,58
.8120,58
6.75171,37
6.34160,96
1.7243,61 5.61
142,42
2 x 3.50 88,9
.35 TYP.8,89
SAA-P107-NQ
SAA-V108-NQ
Product Dimensions (Inches, mm)
1�
1.0
.5
05 10 15 20 25
m /h
0,5
PRESSURE3
4,0
bar
cfm
psig
1,0 1,5 2,0
015202530 10
VACUUM
5
0 0400 600 8002001000
2.0
1,0
2,0
3,0
4.06,0
0
SAA -P107-NQ
SAA -V108-NQSAA -V109-NQ
�0 Hz
3.5
3.0
2.5
1.5
30
5,0
SAA-V109-NQ
APPROX. 6 FOOT LONG CORD ASM.NEMA 5-15P, 15A, 125 V PLUG
4 x #10-32 UNF-2B THRU
9.73247,14
5.49139,0
2.1253,85
1.7243,61 5.61
142.42
2 x 3.50 88,9
.35 TYP.8,89
6.79172,47
6.38162.05
.8120,58
.8120,58
Product Performance (U.S./Imperial, Metric)
Model Motor Parallel/ RPM Number Motor Type Staged 60 Hz HP kW lbs. kg
SAA-P107-NQ 115-60-1 PSC -- 1575 1/6 0,12 11,1 5,0 SAA-V108-NQ 115-60-1 PSC Parallel 1575 1/6 0,12 11,1 5,0SAA-V109-NQ 115-60-1 PSC Staged 1575 1/6 0,12 11,1 5,0
Product Specifications "P" models are pressure; "V" models are vacuum
Oilless Miniature Rocking Piston to 3.0 cfm
1�
1/4 NPT Outlet
1/4 NPT Inlet
7,53191,267,12
180.85
3.5088,90
1.6241,15
.8120,57
Filter Unattached
4,75120,65
.5012,70
4 X #10-32 UNF-2B THRU
7.40187,96
5.38136,65
1/4 NPT Outlet
1/4 NPT Inlet
4 X #10-32UNF-2B THRU
1.6241,15
.8120,57
7,53191,26
7,12180.85
9.31236,55
4,75120,65
.5012,70
3.5088,90
5,38136,65
FILTER UNATTACHED
RED LEAD POSITIVE
BLACK LEAD -NEGATIVE
DC Models
ROA Series
AC Models
SHADED POLE MOTOR100 PSI MAX. PRESSURE, 26.0" HG MAX. VACUUM 1.6 CFM OPEN FLOW
PSC 4 POLE MOTOR100 PSI MAX. PRESSURE, 27.0" HG MAX. VACUUM .78 CFM OPEN FLOW
DC MOTOR100 PSI MAX. PRESSURE, 26.0" HG MAX. VACUUM 1.1 CFM OPEN FLOW
PRODUCT FEATURES• Oilless Operation• Motor mounted• Rugged construction/low maintenance• Low noise levels
INCLUDES• Muffler/filter AH190• Capacitor AF873A (DB and DD motors)• Capacitor AF485A (FB motor)
RECOMMENDED ACCESSORIES• Pressure gauge AF583• Pressure reliev valve AF592S• Vacuum gauge AA640• Vacuum relief valve AA550C-V• (4) Rubber feet AF584A• Filter vacuum only AA617G• Repair kits K757
Oilless Miniature Rocking Piston to 1.6 cfm
Product Dimensions (Inches, mm)
1�
Product Specifications "P" models are pressure; "V" models are vacuum
.50
.25
020 40 60 80
m /h
1,0
PRESSURE3
2,0
bar
cfm
psig
2,0 3,0 4,0
015202530 10
VACUUM
5
0 0400 600 8002001000
1.00
0,5
1,0
1,5
2.003,0
0
ROA-P1 08- EB
ROA-P2 08- FB
ROA-P2 01- BNROA-P1 08- DB
ROA-V2 10- BN
�0 Hz
1.75
1.50
1.25
.75
100
2,5
5,0 6,0 7,0
.50
.25
020 40 60 80
m /h
1,0
PRESSURE3
2,0
bar
cfm
psig
2,0 3,0 4,0
015202530 10
VACUUM
5
0 0400 600 8002001000
1.00
0,5
1,0
1,5
2.003,0
0
ROA-P108-EB
ROA-P102-JH
ROA-P208-FB
ROA-P201-JH/JK (DC)
ROA-P201-AAROA-P108-DB
ROA-V210-DB/DDROA-V210-JHROA-V210-AA
60 Hz
1.75
1.50
1.25
.75
100
2,5
5,0 6,0 7,0
Model Motor RPM WtNumber Motor Type 60 Hz 50 Hz HP kW lbs. kg*ROA-P201-AA 115-60-1 Shaded Pole 1575 -- 1/8 0,09 12,0 5,6 ROA-P201-BN 220/240-50-1 Shaded Pole -- 1275 1/8 0,09 12.0 5,6ROA-P108-DD 230/220-60/50-1 PSC 1575 1275 1/8 0,09 15.0 6,8ROA-P108-EB 115/110-60/50-1 PSC 1575 1275 1/4 0,19 15.0 6,8ROA-P208-DB 115/110-60/50-1 PSC (4 Pole) 1575 1275 1/8 0,09 12,3 5,6ROA-P208-FB 115/110-60/50-1 PSC (2 Pole) 3000 2500 1/4 0,19 12.3 5,6ROA-P209-DB 115/110-60/50-1 PSC 1575 1275 1/8 0,09 12.0 5,6ROA-P201-JH 12 Volt DC 2100 1/8 0,09 10.0 4,5ROA-P201-JK 24 Volt DC 2100 1/8 0,09 10.0 4,5*ROA-V210-AA 115-60-1 Shaded Pole 1575 -- 1/8 0,09 12.3 5,6+ROA-V210-BN 220/240-50-1 Shaded Pole -- 1275 1/8 0,09 12.3 5,6ROA-V210-JH 12 Volt DC 2100 1/8 0,09 10.0 4,5
•Includes 10 foot cord, switch and plug.+Includes 2 meter European color coded cord (no plug)
Product Performance (U.S./Imperial, Metric)
Oilless Miniature Rocking Piston to 1.6 cfm
1�
RAA Series
Shown without muffler which is included
PSC 4 POLE MOTOR100 PSI MAX. PRESSURE, 1.55 CFM OPEN FLOW (60 HZ)
PSC 4 POLE MOTOR27.5" HG MAX. VACUUM, 2.7 CFM OPEN FLOW (60 HZ)
PSC 4 POLE MOTOR SINGLE STG29.0" HG MAX. VACUUM, 1.5 CFM OPEN FLOW (60 HZ)
PSC 2 POLE MOTOR100 PSI MAX. PRESSURE, 2.4 CFM OPEN FLOW (60 HZ)
PRODUCT FEATURES
• Oilless Operation• Motor mounted• Rugged construction/low maintenance• Low noise level
INCLUDES
• Muffler/filter AH190• Unattached capacitor AF876 EB motors AF873A EB motors
RECOMMENDED ACCESSORIES
• Vacuum gauge AA640• Vacuum relief valve AA550C-V• (2) Repair kits K757• 4 Rubber feet AF584A• Filter for vacuum only AA617G• Pressure gauge Af583• Pressure relief valve AF592S
Oilless Rocking Piston to 2.7 cfm
EB/ED Motors
GB/GD Motors
Product Dimensions (Inches, mm)
7.09180.09
7.50190.5
3.5088.9
5.39136,9 4 x 10-32
THRU 11.22285,0
10.21259,0
2 x .5012,7
.317,9
7.09180.09
7.50190.5
3.5088.9
5.39136,9 4 x 10-32
THRU 10.97278,0
9.97253,0
2 x .50 12,7
.317,9
1�
020 40 60 80
m /h
1,0
PRESSURE3
3,0
bar
cfm
psig
2,0 3,0 4,0
015202530 10
VACUUM
5
0 0400 600 8002001000
1.0
1,0
2,0
3.05,0
0
2 Pole Speed4 Pole Speed
Single StageTwo Stage
50 Hz
2.5
2.0
1.5
.5
100
4,0
5,0 6,0 7,0
020 40 60 80
m /h
1,0
PRESSURE3
3,0
bar
cfm
psig
2,0 3,0 4,0
015202530 10
VACUUM
5
0 0400 600 8002001000
1.0
1,0
2,0
3.05,0
0
2 Pole Speed4 Pole Speed
Single StageTwo Stage
60 Hz
2.5
2.0
1.5
.5
100
4,0
5,0 6,0 7,0
Product Performance (U.S./Imperial, Metric)
Product Specifications "P" models are pressure; "V" models are vacuum
Motor Stages/ RPM Wt.Model Number Motor Type Parallel 60 Hz 50 Hz HP KW lbs kg RAA-P203-EB 115/110-60/50-1 PSC (4 pole) -- 1575 1275 1/4 0,19 19 8,6RAA-P203-ED 230/220-60/50-1 PSC (4 pole) -- 1575 1275 1/4 0,19 19 8,6RAA-P203-GB 115/110-60/50-1 PSC (2 pole) -- 3000 2500 1/4 0,19 19 8,6RAA-P203-GD 230/220/60-50-1 PSC (2 pole) -- 3000 2500 1/4 0,19 19 8,6RAA-V210-EB 115/110-60/50-1 PSC (4 pole) Parallel 1575 1275 1/4 0,19 19 8,6RAA-V211-EB 115/110-60/50-1 PSC (4 pole) Staged 1575 1275 1/4 0,19 19 8,6RAA-V210-ED 230/220-60-50-1 PSC (4 pole) Parallel 1575 1275 1/4 0,19 19 8,6
Oilless Rocking Piston to 2.7 cfm
1�
71R/72R SeriesSingle Cylinder Compressors
MODELS 71R142100 PSI MAX. PRESSURE, 2.0 CFM OPEN FLOW (60HZ)
MODEL 72R14250 PSI MAX. PRESSURE, 2.4 CFM OPEN FLOW (60HZ)
PRODUCT FEATURES• Oilless operation• All wetted aluminum parts treated for corrosion protection from
moisture• Rugged motor shell construction
INCLUDES• Filter/muffler B300F
RECOMMENDED ACCESSORIES
• Pressure relief valve AF592S• Pressure gauge AF583• Rubber feet (4) AB319A• In-line filter for vacuum units AA617G • Vacuum relief valve AA550C-V• Vacuum gauge AA640• Repair Kit 71R K704, 72R K705
Oilless Rocking Piston 2.4 cfm
2.753.70
2.132.13 .34.37
4.00
2.00
6.88
7.88
o5.63
101,6
50,8
1/46,35
NPTF
o143
200,15
174,75
54,1 54,1
93,98 69,858.97
227,84
4x SLOT DETAIL
0.720.69
18,2917,53
9,48,6
195,07.67 This dimension only for
model with T in the motor number.
Terminalon unitswith T in the motor #
Product Dimensions (Inches, mm)
�0
2.0
1.5
1.0
0.5
0
cfmm3/h
FRE
E A
IR F
LOW
4,0
3,0
2,0
1,0
00 20 40 60 80 100
60 Hz
72R142
psi
0 1,0 2,0 3,0 4,0 5,0 bar6,0 7,0
2.5
71R142
Product Performance (U.S./ Imperial, Metric)
Product Specifications
RPM WtModel Number Motor Motor Type 60 Hz 50 Hz HP kW lbs. kg71R142-P001B-D300X 100/115-60/50-1 PSC (4 pole) 1675 1400 1/3 0,25 14 6,4 71R142-P001B-D301X 200/240-50/60-1 PSC (4 pole) 1675 1400 1/3 0,25 14 6,472R142-P0018-D300X 100-115-50/60-1 PSC (4 pole) 1675 1400 1/3 0,25 17 7,772R142-P0018-D301X 200-240-50/60-1 PSC (4 pole) 1675 1400 1/3 0,25 17 7,7
Oilless Rocking Piston 2.5 cfm
0 20 40 60 80 100 psi
0 1,0 2,0 3,0 4,0 5,0 bar6,0 7,0
72R14271R142
50 Hz
�1
MODEL 71R545 STAGED175 PSI MAX. PRESSURE, 2.0 CFM OPEN FLOW (60HZ)
PRODUCT FEATURES• Oilless operation• All wetted aluminum parts treated for corrosion protection from
moisture• Rugged motor shell construction
INCLUDES• Capacitor AK385• Rubber feet (4) AF713A• Safety valve AS100J• Interstage filter AT441• Filter B300F not pictured, shipped unattached
RECOMMENDED ACCESSORIES• Repair kit K634
Oilless Rocking Piston 2.0 cfm
Product Dimensions (Inches, mm).
1.741.76
3.493.51
2x 2.00
2x 4.00
AP PROX.7.22
2x 7.25
8.19
183,39
101,650,8
208,03
184,15
ø5.63ø143,0
44,744,2
89,1588,65
1/4 x 20TAP PEDHOLES
2x 1.4 NPTF6,35
CENT.7.9758.025
9.91 D401X
9.0228,6
203,84202,57
251,7 MOTOR
1.0
0.8
0.6
0.4
0.2
0
cfmm3/h
FR
EE
AIR
FL
OW
2,0
1,5
1,0
0,5
00 25 50 75 100 125 psi
0 3,5 7,0 10,5 bar
�0 Hz
14,0
1.2
2,5
150
�0 Hz1.4
1.6
1.8
2.0
3,0
3,5
175 200
Model Motor RPM WtNumber Motor Type 60 Hz 50 Hz HP kW lbs. kg71R545-P315B-D401X 100/115-60-1 PSC (4 pole) 1725 1425 1/2 0,37 15.6 7.09 71R545-P315B-D302CX 220-240-50-1 PSC (4 pole) -- 1425 1/3 0,25 15.6 7,09
Product Performance (U.S./ Imperial, Metric)
Product Specifications
71R SeriesTwin Cylinder HighPressure Compressor
��
Oilless Rocking Piston 5.5 cfm
MODELS 71R642100 PSI MAX. PRESSURE, 3.5 CFM OPEN FLOW (60 HZ
MODELS 71R645/71R655100 PSI MAX. PRESSURE, 4.35 CFM OPEN FLOW (60 HZ
MODELS 72R645/72R65515 PSI MAX. PRESSURE, 5.5 CFM OPEN FLOW (60HZ)
PRODUCT FEATURES• Oilless operation• All wetted aluminum parts treated for corrosion protection from
moisture• Rugged motor shell construction
INCLUDES• Dry-cell capacitor AT250 (D303X Motor), AT251 (D304X Motor)
- not pictured, shipped unattached• Rubber feet (4) AF713A
RECOMMENDED ACCESSORIES• Relief valve AA600• Pressure gauge AA644B• Repair Kit 71R K557/72R K558
71R/72R SeriesTwin Cylinder Compressor
o
101,6
8.19 208,0
7.25 184,0
CENT.8.25 D303X
9.16 D303X
CENT.7.9758.025
209,6 MOTOR8.50 D304X
215,9 MOTOR
203,84202,57
232,7 MOTOR9.41 D304X
239,01 MOTOR
Terminal on units with T in the motor #
4.00
1/4 X 20TAPPEDHOLES
3.513.49
1.761.74
2 x
5.63
2 x 2.00
2 x 4.00
89,288,6
44,744,2
143,0
101,6
50,8
Product Dimensions (Inches, mm)
��
Product Performance (U.S./ Imperial, Metric)Dotted line indicates intermittent duty.
Model Motor RPM WtNumber Motor Type 60 Hz 50 Hz HP kW lbs. Kg71R645-P112-D303X 115-60-1 PSC (4 pole) 1650 -- 1/3 0,25 15.6 7,0971R647-P10-C322X 220/240-50-1 PSC (4 pole) -- 1400 1/2 0,37 23,4 10,671R647-P10-C322 220-240-50-1 PSC (4 pole) -- 1450 1/3 0,25 19,8 9,0*71R647-P10-C322TX 220-240-50-1 PSC (4 pole) -- 1450 1/3 0,25 23.4 10,671R655-P112-D304X 220-240-50-1 PSC (4 pole) -- 1425 1/3 0,25 16.0 7,2772R645-P112-D303X 115-60-1 PSC (4 pole) 1650 -- 1/3 0,25 15.6 7,0972R655-P112-D304X 220-240-50-1 PSC (4 pole) -- 1425 1/3 0,25 16.0 7,2771R647-P112-D401X 115-60-1 PSC (4 pole) 1650 -- 1/2 0,37 15,6 7,0971R642-P112-D501X 100-115/60-1 PSC (4 pole) 1650 -- 3/4 0,37 15,6 7,09 100/50-1 -- 142571R645-P112D-D402CX 220/230/60-1 PSC (4 pole) 1650 1/2 0,37 15,6 7,09 220-240/50-1 -- 142571R647-P112U-D500CX 115-60-1 PSC (4 pole) 1650 -- 3/4 0,56 15,6 7,09
* Unit with terminal box
50 Hzcfm
FREE
A
IR F
LOW
0 20 40 60 80 psi
0 1,0 2,0 3,0 bar7,0
100
4,0 5,0 6,0
71R647 (C322TX)
71R642 (D501X)
71R645 (D402X)
71R647 (D401X)
m3/h
6,0
5,0
4,0
3,0
7,0
3.5
3.0
2.5
2.0
1.5
4.04.5
3.5
3.0
2.5
2.0
1.5
cfmm3/h
FR
EE
AIR
FLO
W
8,0
6,0
5,0
4,0
3,0
0 20 40 60 80 psi
0 1,0 2,0 3,0 bar
71R647 (D401X)
7,0
100
60 Hz
71R647 (D500X)
71R642 (D501X)
71R645 (D402X)
4,0 5,0 6,0
4.07,0
5.0
4.0
3.0
2.0
1.0
0
cfmm3/h
FR
EE
AIR
FLO
W
8,0
6,0
4,0
2,0
00 5 10 15 20 25 psi
0 0,5 1,0 1,5 bar
72R655 (D304X)
2,0
6.010,0
30
71R655 (D304X)
50 Hz
5.0
4.0
3.0
2.0
1.0
0
cfmm3/h
FR
EE
AIR
FLO
W
8,0
6,0
4,0
2,0
00 5 10 15 20 25 psi
0 0,5 1,0 1,5 bar
72R645 (D303X)
2,0
6.010,0
30
71R645 (D303X)
60 Hz
Product Specifications
��
71R/72R Series Twin CylinderVacuum Pump
MODEL 71R645/71R65528” HG MAX. VACUUM, 4.5 CFM OPEN FLOW (60HZ)
MODEL 72R547/72R555 STAGED29” HG MAX. VACUUM, 2.6 CFM OPEN FLOW (60HZ)
MODEL 72R645/72R65528” HG MAX. VACUUM, 5.5 CFM OPEN FLOW (60HZ)
PRODUCT FEATURES• Oilless operation• All wetted aluminum parts treated for corrosion protection
from moisture• Rugged motor shell construction
INCLUDES• Dry-cell capacitor AT250 (D303X Motors, AT251 (D304X
Motor) - not pictured, shipped unattached• Rubber feet (4) AF713A
Oilless Rocking Piston 5.5 cfm
o
101,6
8.19 208,0
7.25 184,0
CENT.8.25 D303X
9.16 D303X
CENT.7.9758.025
209,6 MOTOR8.50 D304X
215,9 MOTOR
203,84202,57
232,7 MOTOR9.41 D304X
239,01 MOTOR
Terminal on units with T in the motor #
4.00
1/4 X 20TAPPEDHOLES
3.513.49
1.761.74
2 x
5.63
2 x 2.00
2 x 4.00
89,288,6
44,744,2
143,0
101,6
50,8
Product Dimensions (Inches, mm)
��
5.0
4.0
3.0
2.0
1.0
0
cfmm3/h
FR
EE
AIR
FL
OW
8,0
6,0
4,0
2,0
00 5 10 15 20 25 "Hg
1000 800 600 400 mbar200
6.010,0
30
0
��R���/��R����1R���/�1R�����R���/��R���
Model Motor Parallel/ RPM Wt. Number Motor Type Staged 60 Hz 50 Hz HP kW lbs. kg71R645-V114-D303X 115-60-1 PSC (4 pole) Parallel 1650 -- 1/3 0,25 15.6 7,0971R655-V10-C222X 220-240-50-1 Shaded Pole Parallel -- 1450 1/3 0,25 16.0 7,27*71R655-V10-C222TX 220-240-50-1 Shaded Pole Parallel -- 1450 1/3 0,25 16.0 7,2771R655-V114-D304X 220-240-50-1 PSC (4 pole) Parallel -- 1425 1/3 0,25 16.0 7,2772R547-V116-D303X 115-60-1 PSC (4 pole) Staged 1650 -- 1/3 0,25 15.6 7,0972R555-V10-C222X 220-240-50-1 Shaded Pole Staged -- 1450 1/3 0,25 9,072R555-V10-C222TX 220-240-50-1 Shaded Pole Staged -- 1450 1/3 0,25 9,072R555-V116B-D204X 220-240-50-1 PSC (4 pole) Staged -- 1425 1/3 0,25 16.0 7,2772R645-V114-D303X 115-60-1 PSC (4 pole) Parallel 1650 -- 1/3 0,25 15.6 7,0972R655-V10-C222X 220-240-50-1 Shaded Pole Parallel -- 1450 1/3 0,25 9,972R655-V10-C222TX 220-240-50-1 Shaded Pole Parallel -- 1450 1/3 0,25 9,972R655-V114-D304X 220-240-50-1 PSC (4 pole) Parallel -- 1425 1/3 0,25 16.0 7,27
*All model numbers with T have a terminal box attached
Product Performance (U.S./Imperial, Metric)
��
2 x 6.50 165,2
7.53191,4
2 x .71 18,0
ø5.12 130,1
4 x 1/4-20 thru 2 x 1.75 44,42 x 3.50
88,9
6.97 typ.177,1
7.97202,5
.225,6
3.23 approx.82,1
1.4236,1
.7118,0
Unit shown with attached recommended filter
MODEL 74R130100 PSI MAX. PRESSURE,1.50 CFM OPEN FLOW (60 Hz) 100 PSI MAX. PRESSURE, 1.25 CFM OPEN FLOW (50 Hz)
PRODUCT FEATURES
• Oilless operation• All wetted aluminum parts treated for corrosion protection from moisture• Rugged motor shell construction• Includes filter B300A• The H200 and H201 motors have 3 pigtail wire arrangement• The H203 has 6 pigtail wire arrangement
RECOMMENDED ACCESSORIES• (4) Rubber feet AF713A• Relief/presure valve AF592S• Pressure gauge AF583• Repair kit K806
Oilless Rocking Piston to 1.5 cfm
74R SeriesSingle Cylinder Compressor
Product Dimensions (Inches, mm))
Product Specifications
RPM WtModel Number Motor 60 Cycle 50 Cycle HP kW lbs. kg74R130-P101-H200X 100-115-60/50-1 1625 1375 1/4 0,19 14.2 6,474R130-P101-H201X 220-240/230-50/60-1 1625 1375 1/4 0,19 14.3 6,574R130-P101-H203X 115/230-60-1;220/240-50-1 1625 1375 1/4 0,19 14.3 6,5**74R130-P101D-H203X 115/230-60-1;220/240-50-1 1625 1375 1/4 0,19 14.3 6,5*74R130-P114-H200X 100-115-60/60-1 1625 1375 1/4 0,19 14,2 6,4*74R130-P114-H201X 220-240/230-50/60-1 1625 1375 1/4 0,19 14.3 6,5
* Has M5 foot mount
** Biased Valve
��
2.0
1.5
1.0
0.5
0
cfmm3/h
FREE
AIR
FLO
W
4,0
3,0
2,0
1,0
00 20 40 60 100
0 1,0 2,0 3,0 4,0 5,0 bar
60 Hz
6,0 7,0
80
**74R130-P101D-H203X
2.0
1.5
1.0
0.5
0
cfmm3/h
FREE
AIR
FLO
W
4,0
3,0
2,0
1,0
00 20 40 60 100
0 1,0 2,0 3,0 4,0 5,0 bar
50 Hz
6,0 7,0
80
**74R130-P101D-H203X
Product Performance (U.S./imperial, Metric)
28
MODEL 75R64720 PSI MAX. PRESSURE, 27” HG MAX. VACUUM5.1 CFM OPEN FLOW (60 HZ)
MODEL 75R64530 PSI MAX. PRESSURE, 4.90 CFM OPEN FLOW (60 HZ)
MODEL 75R64040 PSI MAX. PRESSURE, 4.45 CFM OPEN FLOW (60 HZ)
MODEL 75R63530 PSI MAX. PRESSURE, 4.05 CFM OPEN FLOW (60 HZ)
PRODUCT FEATURES• Oilless operation• All wetted aluminum parts treated for corrosion protection from moisture• Rugged motor shell construction
INCLUDES•Filter/muffler
RECOMMENDED ACCESSORIES• Pressure gauge AA644B • Vacuum gauge AA640 • Repair Kit K797• Rubber feet (4) AF713A• Pressure relief valve AF592S• Vacuum relief valve AA204
.7118
9.42239.3
8.0 (approx)203,2
7.62193,5
6.77172
.4310,9
4 x 1/4 -20tapped holes
.7118
1/4 NPT OUTLET1/4 NPT INLET
5.12130,0
1.7544,5
3.5088,9
Product Dimensions (Inches, mm)
Oilless Rocking Piston to 5.1 cfm
75R Series Twin CylinderVacuum Pump & Compressors
Product Specifications
MotorRPM`WtNumber Motor Type 60Hz 50Hz HP kW lbs.KgCapacitor75R635-P101-H301X 100-115-60/50-1 PSC 1625 1375 1/3 0,25 17.1 7,8 AT546A75R640-P101-H301X 115-60-1 PSC 1625 ----- 1/3 0,25 17.1 7,8 AT546A75R645-P101-H301X 115-60-1 PSC 1625 ----- 1/3 0,25 17.1 7,8 AT36775R647-P101-H301X 115-60-1 PSC 1625 ----- 1/3 0,25 17.5 7,9 AT251*75R647-V101-H301X 115-60-1 PSC 1625 ----- 1/3 0,25 17.5 7,9 AT25175R645-P101-H302CX 220-240/230-50/60-1 PSC 1625 1375 1/3 0,25 17.6 8,0 AT25075R647-P101-H302CX 220-240/230/50/60-1 PSC 1625 1375 1/3 0,25 18.0 8,2 AT25175R647-P101A-H311CX 115-60-1 PSC 1625 ----- 1/3 0,25 18.0 8,2 AT251
*Parallel Operation
��
3.0
2.0
005101520
Free Air Flow
2530
4.0
m /h
200 400 600
PRESSURE3
bar
psig
cfm
800mbar
" Hg 10 20 30 40
0 01000
VACUUM
1.0
75R647
60 Hz
8.0
6.0
0
4.0
2.0
1,0 2,0 3,0
6.010.0
5.0
75R64775R64575R64075R635 (100V)
3.0
2.0
005101520
Free Air Flow
2530
4.0
m /h
200 400 600
PRESSURE3
bar
psig
cfm
800mbar
" Hg 10 20 30 40
0 01000
VACUUM
1.0
75R647
50 Hz
8.0
6.0
0
4.0
2.0
1,0 2,0 3,0
6.010.0
5.075R64775R645
Product Performance (U.S./imperial, Metric)
Oilless Rocking Piston to 5.1 cfm
�0
MODEL 75R13527" MAX VACUUM, 1.9 CFM OPEN FLOW (60Hz)
PRODUCT FEATURES• Oilless operation• All wetted aluminum parts treated for corrosion protection
from moisture• Rugged motor shell construction
INCLUDES• Filter/muffler
RECOMMENDED ACCESSORIES• Vacuum gauge AA640• Repair kit K806• Vacuum relief valve AA204• (4) Rubber feet AF713A
75R Series Single CylinderVacuum Pump
Oilless Rocking Piston 1.9 cfm
2 x 6.50 165,2
7.53191,4
2 x .71 18,0
ø5.12 130,1
4 x 1/4-20 thru 2 x 1.75 44,42 x 3.50
88,9
6.97 typ.177,1
7.97202,5
.225,6
3.23 approx.82,1
1.4236,1
.7118,0
Product Dimensions (Inches, mm).
Product Specifications
Model Motor RPM WtNumber Motor Type 60 Hz 50 Hz HP kW lbs. kg75R135-V102-H200X 100/100-115-50/60-1 PSC 1625 1375 1/4 0,19 14.3 6,575R135-V103-H203X 115/230-60-220-240-50 PSC 1625 1375 1/4 0,19 14.3 6,5
Product Performance (U.S./Imperial, Metric)
1.5
1.0
.5
0
cfm
0 5 10 15 20 25 "Hg
1000 800 600 400 mbar200
2.0
30
0
m3/h
FR
EE
AIR
FL
OW
3,0
2,0
1,0
0
60 Hz
1.5
1.0
.5
0
cfmm3/h
FR
EE
AIR
FL
OW
3,0
2,0
1,0
00 5 10 15 20 25 "Hg
1000 800 600 400 mbar200
2.0
30
0
50 Hz
�1
81R SeriesTwin Cylinder Compressor
.7118,0
2 x .71 18,0
ø 5.12 130,0
2 x 1.75 44,4
3 x 6.56 166,6
7.63193,9
2 x 1.75 44,4 .42
10,6
9.37238,0
6.56166,6
4 x 1/4-20 THRU
2 x 8.01 203,3
9.43239,5
2 x .71 18,0
Oilless Rocking Piston 3.7 cfm
Model Motor RPM WtNumber Motor Type 60 Hz 50 Hz HP kW lbs. kg81R640-P101-H311CX 115-60-1 PSC 1725 1/3 0,25 17.1 7,881R640-P101-H302CX 220-240-50-1 PSC 1450 1/3 0,25 17.6 8.0
Product Dimensions (inches/mm)
Product Specifications "P" models are pressure
Product Performance (U.S./Imperial, Metric)
5.0
4.0
3.0
2.0
1.0
0
cfmm3/h
FREE
AIR
Flo
W
8,0
6,0
4,0
2,0
00 20 40 60 80 psi
0 1,0 2,0 3,0 bar7,0
100
50/60 hz
4,0 5,0 6,0
MODEL 81R640 100 PSI MAX. PRESSURE, 3.7 CFM OPEN FLOW (60 Hz)
100 PSI MAX. PRESSURE, 3.0 CFM OPEN FLOW (50 Hz)
PRODUCT FEATURES
• Oilless operation• All wetted aluminum parts treated for corrosion protection from moisture• Rugged motor shell construction
RECOMMENDED ACCESSORIES
• Safety valve AP202• Pressure gauge AA806• Filter B300A• Capacitors: AT251dry or AJ594 wet• Repair kit K934
��
82R SeriesTwin Cylinder Compressor
MODEL 82R637 Series30 PSI MAX. PRESSURE, 4.20 CFM OPEN FLOW (60Hz)
MODEL 82R637 Series30 PSI MAX. PRESSURE, 3.8 CFM OPEN FLOW 26" HG MAX. VACUUM, 3.3 CFM OPEN FLOW (bLDC)
MODEL 82R645 Series30 PSI MAX. PRESSURE, 4.5 CFM OPEN FLOW (60Hz)30 PSI MAX. PRESSURE, 4.20 CFM OPEN FLOW (50Hz)
PRODUCT FEATURES
• Oilless operation• All wetted aluminum parts treated for corrosion protection from moisture• Rugged motor shell construction
RECOMMENDED ACCESSORIES
• Relief valve AP202 • Pressure gauge AF583 • Filter B300A• Capacitors: AT250: 82R645, AT251: 82R637• Repair kit K797A
203,28.00
239,39.42
18,0.71
(APPROX.)
183,37.22
4 x 1/4-20tapped holes
10,9.43
166,66.56
WARNING
GAS
TID
EX 130,0o5.12
18,0.71
3 X 1/4 NPT
44,51.75
88,93.50
Oilless Rocking Piston 4.20 cfm
Product Dimensions (Inches, mm)
4 x .71 18,0
ø 5.12 130,0
2 x 3.50 89,04 x 1/4-20 THRU
7.25 approx. 184,0
.42 11,0
6.59167,0
2 x .71 18,0
9.42239,0
2 x 8.00 203
DC Unit
AC Unit
��
2.0
1.0
05 10 15 20 30
m /h
.5
PRESSURE3
bar
cfm
psig
6,0
4,0
2,0
1.0 1.5 2
015202530 10
VACUUM
5
1 0400 600 8002001000
3.0
4.0
5.08,0
0
82R637 (BLDC)
50/60 Hz
25
82R645 (60 Hz)
82R645 (50 Hz)82R637 (60 Hz)
82R637 (BLDC)
Model Motor RPM WtNumber Motor Type 60 Hz 50 Hz HP kW lbs. kg82R637-P135-H311CX 115-60-1 PSC 1725 1/3 0,25 17.1 7,882R637-P150-H314X 24V DC ----- ----- 1/3 0,25 17.9 7,882R645-P135-H302CX 220-240-50-1; PSC 1450 1/3 0,25 17.6 8.0 230-60-1
Product Specifications "P" models are pressure
Product Performance (U.S./Imperial, Metric)
Oilless Rocking Piston 4.20 cfm
��
85R SeriesTwin Cylinder Compressor
MODEL 85R63225 PSI MAX PRESSURE, 3.7 CFM OPEN FLOW 60 HZ (N211X MOTOR) 40 PSI MAX. PRESSURE, 3.7 CFM OPEN FLOW 60 Hz (N311X MOTOR)
MODEL 85R63730 PSI MAX. PRESSURE, 4.3 CFM OPEN FLOW 60 Hz
PRODUCT FEATURES
• Oilless operation• New optionoal side mount configuration for lower center of
gravity• Rugged motor shell construction• Long life and lower power consumption• Multiple porting options• Light weight design• All wetted aluminum parts treated for corrosion protection
from moisture
RECOMMENDED ACCESSORIES
• Relief Valve AF592S• Pressure Gauge AA644B• Capacitor AT251• Filter B300A• (4) Rubber feet AF713A
Product Specifications
Motor RPM Wt. Model Number Motor Type 60 Hz HP kw lbs. kg 85R632-P201-N211X 115-60-1 PSC 1750 1/4 0,19 14.6 6,6 85R632-P201-N311X 115-60-1 PSC 1750 1/3 0,25 15.6 7,1 85R637-P201-N311X 115-60-1 PSC 1750 1/3 0,25 15.6 7,1
Oilless Rocking Piston to 4.3 cfm
Product Performance
5.0
4.0
3.0
2.0
1.0
0
cfmm3/h
FREE
AIR
FLO
W
8,0
6,0
4,0
2,0
00 10 20 40 psi
0 2,01,0 bar3,0
85R63785R632 (N211X)85R632 (N311X)
30
0,5 1,5 2,5
Product Dimensions (Inches, mm)
9.17232,80
5.41137,4 Relief Valve or
1/4 - 18 NPT
6.62168,0
2.96 approx.75,3
8.00203,2 8.68
220,5
.44 approx.11,2
1.75 44,4
1.75 44,4
4.15105,5 .75 typ.
19,01/4-18NPT
7.03 178,7
6.69
169,8
4 x 1/4 -20tapped holes
5.15130,8
��
7.96202,24
.8120,58
1.6241,16
7.74196,63
1.1830,07
10.43265,0
2 x 1/4 hose nipple
INLET OUTLET
7.40188,01
Approx. 10 ft/3048 long cord assm.NEMA 5-15P, 15A, 125V plug
single pole switch
4 x #10-32 UNF-2B Thru
Lab ModeLs
ShAdEd PolE100 PSI MAX. PRESSURE, 25 HG MAX. VACUUM .8 CFM OPEN FLOW (60Hz)
PRODUCT FEATURES• Oilless operation• Motor mounted• Rugged construction/low maintenance
INCLUDES• Gauges - Vacuum AE136, Pressure AA806• Hose barbs - AG613• Regulators - Vacuum AA550C-V, Pressure AF887• Carrying handle - AP523A• Rubber feet - AF584A
RECOMMENDED ACCESSORIES• Repair kit K757
Lab Models to .8 cfm
Product Dimensions (Inches, mm)
Product Performance (U.S., Metric)
Product Specifications
Model Motor RPM WtNumber Motor Type 60 Hz 50 Hz HP kW lbs. kgROA-P104-AA 115-60-1 Shaded Pole 1725 1/8 20 7,0ROA-P104-BN 220/240-50-1 Shaded Pole 1425 1/8 0,10 14 6,4
CNL UL listed for use in Canada CE conforms to European Standards
020 40 60 80
m /h
1,0
PRESSURE3
0,9
bar
cfm
psig
2,0 3,0 4,0
015202530 10
VACUUM
5
0 0400 600 8002001000
.20,3
0,6
1.0
1,5
0
�0 Hz
.8
.6
.4
100
1,2
5,0 6,0 7,0
020 40 60 80
m /h
1,0
PRESSURE3
0,9
bar
cfm
psig
2,0 3,0 4,0
015202530 10
VACUUM
5
0 0400 600 8002001000
.20,3
0,6
1.0
1,5
0
�0 Hz
.8
.6
.4
100
1,2
5,0 6,0 7,0
��
PRODUCT FEATURES
• AE163A Pressure Switch• AE248 Manual Drain• AS100B Pressure Safety Valve (ASME)• AA806 Pressure Gauge• Globe Valve• Unloading Capability• 100% Oilless Operation
APPLICATIONS
• Beverage Dispensing• Lab Use• Portable Displays• Commercial Door Actuation• Portable - Off Site Use
RECOMMENDED ACCESSORIES
• Repair Kit ROA-P206T-AA K75671R142-P075T-D300X K70471R640-P64T-D500X & 716640-P67T-D500X K557D71R640-P65DT-D500X K557D (2 required)
Product Specifications "P" models are pressure
When to specify a compressed air or vacuum tank systemMany find it difficult to decide whether to use stand-alone pumps or complete tank packages for their applications. The tank system offers many advantages, which satisfy:
• High Volumes If your application requires an instantaneous supply of high pressure or vacuum, then the reservoir provided by a tank system is essential. Even the largest of pumps has to start at atmospheric pressure and therefore will not be able to give that instantaneous supply of pres-sure/vacuum. • Cost Savings Using a tank system can reduce initial maintenance and replacement costs. Here’s why: Applications that require high volumes of air in intermittent cycles can use relatively small pumps. The longer the interval between cycles, the more applicable a tank system can be. For example, a 1 HP compressor on a tank can supply the same amount of flow for one minute as a stand alone 10 HP compressor.
• Quiet Operation In a tank system the pump runs on demand, which means that it is not operating a good part of the time. No operation, no operat-ing noise. • Pulse Free Pulse-free air is required by many pneumatic systems for proper operation of pneumatic tools or components. A tank provides pulsa-tion free air from the reciprocating compressor.
• Central System Small industrial shops where different tools are required at different times find tank systems ideal, since one tank system can sup-ply air to multiple locations.
Tank CFM @ PSIG Recovery of Shipping Size ON/OFF 0 to 100 Standard Motor WeightModel Number Gallons 0 10 30 50 70 100 psig Setting Setting Voltage HP lbs.ROA-P206T-AA 2 .76 .65 .47 .38 .27 .19 70/100 5:00 1:55 115-60-1 1/8 3971R142-P075T-D300X 2 2.00 1.80 1.50 1.20 1.10 .90 70/100 1:30 0:25 115-50/60-1 1/3 42*71R640-P64T-D500CX 12 3.50 3.15 2.65 2.20 1.85 1.46 90/110 5:43 1:13 115-60-1 3/4 105*71R640-P67T-D500CX 12 3.50 3.15 2.65 2.20 1.85 1.46 90/110 5:43 1:13 115-60-1 3/4 105*71R640-P65DT-D500CX 12 7.00 6.30 5.30 4.40 3.70 2.92 90/110 3:13 0:45 115-60-1 3/4 115
Compessed Air Systems
ROA-P206T-AA
71R142-P075T-D300X
Reasons to Call Gast First• Quality and Satisfaction
Gast’s reputation for quality and customer satisfaction in air-moving products has been settingthe industry’s standard of excellence throughout the world since 1921.
• Wide VarietyGast offers a complete line of air-moving products in a broad range of types and sizes, andincludes more extras without adding on extra costs. Utilizing state-of-the-art design, manufactur-ing processes, and electric motor technology, Gast products can be customized to meet thedemands of many applications.
• LiteratureEasy-to-follow literature provides a broad overview of Gast’s extensive line of pneumatic products including operating principles, typical applications and general operating parametersand specifications to offer preliminary guidelines for choosing the right Gast pump for the job.
• Vast Network of National and International DistributorsGast distributors carry a substantial stock of pneumatic products, parts and accessories. For the name and location of your closest representative, visit our website at www.gastmfg.comor contact one of our offices below.
®Registered Trademark/™Trademark of Gast Manufacturing Inc., Copyright ©2007 Gast Manufacturing Inc. All rights reserved.
World Headquarters
P.O. Box 972550 Meadowbrook Rd.Benton Harbor, MI 49023-0097Ph: 269/926-6171Fax: 269/925-8288
Gast Hong Kong
Unit 12, 21/F, Block BNew Trade Plaza6, On Ping Street, ShatinN. T. Hong KongPh: (852) 2690 1008Fax: (852) 2690-1012
JUN-AIR International A/SSundsholmen 3-59400 NørresundbyDenmarkPh: +45 96 32 36 00Fax: +45 96 32 36 01
JUN-AIR USA Inc.1020 Noel Avenue, Suite AWheeling, IL 60090Ph: +1 847 215 9444Fax: +1 847 215 9449
GAST GROUP LTDA Unit of IDEX CorporationUnit 11, The I O CentreNash RoadRedditch, B98 7ASUnited KingdomPh: +44 (0)1527 504040Fax: +44 (0)1527 525262
JUN-AIR Benelux B.V. Gelderlandhaven 5 B 3433 PG NIEUWEGEINThe NetherlandsPhone: +31 (0)30 608 3010Fax: +31 (0)30 608 3015
JUN-AIR France S.A.S.Village Enterprises SaöneMont d'Or444, rue des Jonchères69730 GenayFrancePh: +33 (0)4 37 40 82 70Fax: +33 (0)4 37 40 82 79
JUN-AIR AB Box 70 564 22 Bankeryd Sweden Ph: +46 36 371140 Fax: +46 36 371147