SAI Global Certification Services

Kevin Goodwin General Manager Technical Services SAI Global Assurance

Daniel Darakas – Unrestricted Building Certifier

Date of issue: 16/12/2018

Date of expiry: 16/12/2021

Certificate number: CM20029

This certificate is only valid when reproduced in its entirety.

Page 1 of 12

Certification Body:

SAI Global Certification Services Pty Limited

(ACN 108 716 669) Trading as “SAI Global”

JAS-ANZ Accreditation No. Z1440295AS

Address: 680 George St, Sydney, NSW 2000

Website: www.saiglobal.com

Certificate Holder:

Kingspan Insulation Pty Ltd

266 Beringarra Avenue, Malaga, WA 6090

Tel: 1300 247 235 Fax: 1300 247 329

info@kingspaninsulation.com.au

Certificate number: CM20029

THIS TO CERTIFY THAT

AIR-CELL Insulwhite®, Glareshield XL™, Insulbreak®, Permicav XV™, Permifloor®, Permishield®, Permiwall®

Type and/or use of product:

Reflective pliable building membranes for the provision of thermal insulation in walls, floors, and roofs.

For detailed list of Products Use & Description refer to A1 in Appendix A below

Description of product:

Insulwhite® is a fibre-free thermo reflective insulation, sandwiched by a highly reflective facing on the upper side and a white facing on the other side.

Glareshield XL™, Insulbreak®, Permicav XV™, Permishield® are fibre-free, thermo reflective insulations comprising a cross-linked, closed-cell core sandwiched with an anti-glare foil facing on one side and a plain foil facing on the other side.

Permifloor® is a fibre-free, thermo reflective insulation, comprising a closed-cell foam structure sandwiched with an anti-glare foil facing on one side and a plain foil facing on the other side.

Permiwall® is a fibre-free, thermo reflective insulation, comprising a crosslinked, closed-cell foam core sandwiched with a plain foil facing on both sides.

For detailed Description of Products refer to A2 in Appendix A below.

COMPLIES WITH THE FOLLOWING BCA PROVISIONS AND STATE OR TERRITORY VARIATION(S) BCA 2016 Amdt.1

Volume One Volume Two

Performance Requirement(s) FP1.4* Damp & Weatherproofing - Weatherproofing (Penetration of Water) *Permifloor is not suitable for use in FP1.4 weatherproofing applications

P2.2.2 Weatherproofing

Deemed-to-Satisfy Provision(s):

C1.10(a)(vii) and

Fire Resistance – Fire Hazard Properties (Sarking-type material)

3.7.1.9

3.12.1.1

Fire Hazard properties

Building Fabric – Building Fabric Thermal insulation

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 2 of 12

(ix) interalia Spec C1.10 clause 7 J1.2

J1.3

J1.5

J1.6

(Other Materials including insulation materials)

Building Fabric – Thermal Construction (General) such that it is able to be used as part of a system outlined in clauses J1.3. J1.5 and J1.6

Building Fabric – Roof & Ceiling Construction

Building Fabric – Walls

Building Fabric - Floors

3.12.1.2

3.12.1.4

3.12.1.5

Such that it is able to be used as part of a system outlined in clause 3.12.1.2, 3.12.1.4 & 3.12.1.5 Building Fabric - Roofs

Building Fabric – External Walls

Building Fabric - Floors

State or territory variation(s): NSW Spec C1.10 NSW 7

NSW Section J

NT Section J

QLD Section J

SA J1.3(e)

Materials and assemblies in a Class2 to 9 building to comply with Table4

Replace Section J with NSW Section J. NSW Section J consists of two Subsections J(A) and J(B). NSW Subsection J(A) Energy Efficiency –Class 2 buildings and Class 4 parts (BASIX applies) NSW Subsection J(B) Energy Efficiency –Class 3 and Class 5 to 9 buildings

For a Class 2 building and a Class 4 part of a building, Section J is replaced with Section J of BCA 2009. Section J does not apply to Class 3 and 5 -9 buildings.

In Queensland, fora Class 2 building, Section J is replaced with Section J of BCA 2009.

Energy Efficiency - Roof and ceiling construction

NSW 3.12

NT 3.12

SA 3.12.1.16

In NSW Part 3.12 does not apply BASIX applies

In the Northern Territory, Part 3.12 is replaced with BCA 2009 Part 3.12.

Sunrooms to comply with 3.12.1.6

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 3 of 12

SUBJECT TO THE FOLLOWING LIMITATIONS AND CONDITIONS AND THE PRODUCT TECHNICAL DATA IN APPENDIX A AND EVALUATION STATEMENTS IN APPENDIX B

Limitations and conditions:

1. Each product must be installed in accordance with the relevant Kingspan Insulation Pty Ltd brochure: • Air-cell Insulwhite Brochure (TB055W) AW2277 (Issue 7 Jan 2018). • Air-cell Glareshield XL Brochure (TB055) AW2334 (Issue 9 June 2018). • Air-cell Insulbreak Brochure (TB) AW2326 (Issue 12 May 2018). • Air-cell Permicav XV Brochure (PS055XV) AW2298A (Issue 6 March 2018). • Air-cell Permifloor Brochure (PSW) AW2324A (Issue 11 May 2018). • Air-cell Permishield Brochure (PS) AW2324D (Issue 10 May 2018). • Air-cell Permiwall Brochure (PS055F) AW2324C (Issue 6 May 2018).

2. Permifloor is noted as “water-permeable” and therefore is not suitable for applications where weatherproofing is required. 3. Each product must be used for its intended purpose.

Building classification/s:

Volume 1 – Class 2 to Class 9 buildings

Volume 2 – Class 1 and Class 10 buildings

Scope of certification: The CodeMark Scheme is a building product certification scheme. The rules of the Scheme are available at the ABCB website www.abcb.gov.au. This Certificate of Conformity is to confirm

that the relevant requirements of the Building Code of Australia (BCA) as claimed against have been met. The responsibility for the product performance and its fitness for the intended use remain with the

certificate holder. The certification is not transferrable to a manufacturer not listed on Appendix A of this certificate.

Disclaimer: The Scheme Owner, Scheme Administrator and Scheme Accreditation Body do not make any representations, warranties or guarantees, and accept no legal liability whatsoever arising from or

connected to, the accuracy, reliability, currency or completeness of any material contained within this certificate; and the Scheme Owner, Scheme Administrator and Scheme Accreditation Body disclaim to the

extent permitted by law, all liability (including negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this certificate.

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 4 of 12

APPENDIX A – PRODUCT TECHNICAL DATA

A1 Type and intended use of product

Product Type & Intended use of product

Insulwhite® White faced thermo reflective insulation. The roof insulation fixed to the underside of the rafters, acting as a 3 in 1 insulation, vapour barrier & radiant barrier. Water resistant & unaffected by moisture.

Glareshield XL™ Thermo reflective anti-glare insulation. The roof insulation fixed to the battens, acting as a 3 in 1 insulation, vapour barrier & radiant barrier. Water resistant & unaffected by moisture.

Insulbreak® Thermal break solution. For use in pitch, flat or tapered roofs, cavity walls, insulated dry lining, timber & steel framing, externally insulated cladding systems, floors. Acts as a 3 in 1 insulation, thermal break & vapour barrier. Water resistant & unaffected by moisture.

Permicav XV™ Vapour-permeable insulation for walls with cavities. Acts as a 3 in 1 insulation, vapour-permeable membrane & radiant barrier. Fixed to brickwork over wall ties, or to the outside of stud frames.

Permifloor® Underfloor insulation fixed between or under the floor joists. Is an insulation innovation designed specifically for suspended framed floor applications delivering a 2-in-1 insulation and moisture management solution.

Permishield® Vapour permeable insulation membrane. Is designed for framed wall applications for use behind lightweight cladding materials that require vapour permeance. Is a 3 in 1 insulation, thermal break & vapour permeable sarking. Is water resistant & unaffected by moisture.

Permiwall® Vapour permeable insulation for concrete walls. Wall insulation fixed to the internal side of the wall. Is a 3 in 1 insulation, vapour permeable membrane and radiant barrier. Is water resistant & unaffected by moisture.

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 5 of 12

A2 Description of product

Product Description of product

Insulwhite® Comprises a cross-linked, closed cell insulation core sandwiched by a highly reflective foil facing on the upper side and a white facing on the other side. Kingspan AIR-CELL Insulwhite® is designed to provide a protective, corrosive resistant for use where a white ceiling-like appearance is desired.

Glareshield XL™ A fibre-free, thermo reflective insulations comprising a cross-linked, closed-cell core sandwiched with an anti-glare foil facing on one side and a plain foil facing on the other side.

Insulbreak® A fibre-free, thermo reflective insulations comprising a cross-linked, closed-cell core sandwiched with an anti-glare foil facing on one side and a plain foil facing on the other side. Insulbreak® delivers the R0.20 thermal break required for NCC BCA compliance, reducing thermal bridging and conductivity between building elements

Permicav XV™ A fibre-free, thermo reflective insulations comprising a cross-linked, perforated closed-cell core sandwiched with an anti-glare foil facing on one side and a plain foil facing on the other side.

Permifloor® Manufactured with a patented closed-cell, cross-linked foam structure sandwiched by highly reflective foil surfaces and perforated with tiny, evenly-spaced holes. These perforations allow water and vapour to permeate through preventing moisture that can often collect under flooring when using conventional underfloor insulation systems.

Permishield® A vapour-permeable barrier. Fibre-free, thermo reflective insulations comprising a cross-linked, closed cell structure sandwiched by highly reflective foil surfaces and pierced with tiny, evenly-spaced breather holes.

Permiwall® All-in-one insulation and vapour-permeable membrane designed specifically for concrete walls to reduce the risk of condensation. Manufactured with a patented closed-cell structure sandwiched by highly reflective foil facings and pierced with tiny, evenly-spaced perforations is a fibre-free, thermo reflective insulation, comprising a crosslinked, closed-cell foam core sandwiched with a plain foil facing on both sides.

A3 Product specification

The products are collectively described as: “Thermo-reflective insulation blanket comprised of an encapsulated air cell structure between a layer of reflective aluminium foil and an anti-glare

foil.”

The Kingspan products consist of the following compositions:

INSULWHITE Insulwhite is fibre-free thermo reflective insulation, sandwiched by a highly reflective facing on the upper side and a white facing on the other side.

GLARESHIELD XL Glareshield XL is fibre-free, thermo-reflective insulation comprising a cross-linked, closed-cell core sandwiched with an anti-glare foil facing on one side and a plain

foil facing on the other side.

INSULBREAK, PERMIFLOOR, and PERMISHIELD Kingspan INSULBREAK, PERMIFLOOR, and PERMISHIELD are fibre-free, thermo reflective insulation, comprising a cross-linked, closed-

cell foam core sandwiched with an anti-glare foil facing on one side and a plain foil facing on the other side.

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 6 of 12

PERMICAV XV Kingspan PERMICAV XV is a micro-perforated, fibre-free, thermo reflective insulation, comprising a cross-linked, closed-cell foam core sandwiched with an anti-glare

foil facing on one side and a plain foil facing on the other side.

PERMIWALL Permiwall is fibre-free, thermo reflective insulation, comprising a cross-linked, closed-cell foam core sandwiched with a plain foil facing on both sides.

A4 Manufacturer and manufacturing plant(s)

A5 Installation requirements

Refer to Page 3 of this certificate and the following;

1. Kingspan Insulation Pty Ltd – Air-cell Insulwhite Brochure (TB055W) AW2277 (Issue 7 January 2018). This contains the specification of the product.

2. Kingspan Insulation Pty Ltd – Air-cell Glareshield XL Brochure (TB055) AW2334 (Issue 9 June 2018). This contains the specification of the product.

3. Kingspan Insulation Pty Ltd – Air-cell Insulbreak Brochure (TB) AW2326 (Issue 12 May 2018). This contains the specification of the product.

4. Kingspan Insulation Pty Ltd – Air-cell Permicav XV Brochure (PS055XV) AW2298A (Issue 6 March 2018). This contains the specification of the product.

5. Kingspan Insulation Pty Ltd – Air-cell Permifloor Brochure (PSW) AW2324A (Issue 11 Sept 2018). This contains the specification of the product.

6. Kingspan Insulation Pty Ltd – Air-cell Permishield Brochure (PS) AW2324D (Issue 10 May 2018). This contains the specification for the product.

7. Kingspan Insulation Pty Ltd – Air-cell Permiwall Brochure (PS055F) AW2324C (Issue 6 May 2018). This contains the specification of the product.

8. Kingspan Insulation Pty Ltd – Residential Metal Roof Installation Instructions AW2023 (Issue 2 Oct 2015). This contains guidance for the installation of Kingspan products in

residential metal roofs.

9. Kingspan Insulation Pty Ltd – Residential Tiled Roof Installation Instructions AW2023 (Issue 2 Oct 2015). This contains guidance for the installation of Kingspan products in

residential tiles roofs.

A6 Other relevant technical data

Surface Optics Corporation – Test for Infra-Red emissivity. Job No. 4962MP (dated 24th July 2017). This report provides the results of emissivity data measured to ASTM E-408

(PERMICAV XV).

Surface Optics Corporation – Test for Infra-Red emissivity. Job No. 4962MP (dated 29th June 2017). This report provides the results of emissivity data measured to ASTM E-408

(INSULBREAK).

Surface Optics Corporation – Test for Infra-Red emissivity. Job No. 4962MP (dated 10th July 2014). This report provides the results of emissivity data measured to ASTM E-408

(INSULWHITE).

Surface Optics Corporation – Test for Infra-Red Emittance. Job No. 4792MP (dated 22nd November 2016). This report provides the results of testing to ASTM E-408 (PERMIFLOOR).

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 7 of 12

APPENDIX B – EVALUATION STATEMENTS

B1 Evaluation methods

The system has been assessed as complying with the identified Performance Requirements of the BCA 2016 Amdt 1. This involved a review of product specifications, test reports, installation

manuals, and associated documentation.

1. Energy Efficiency Assessment - Volume 1 - A0.5(a)/A2.2(a)(iv) and Volume 2 - 1.0.5(a)/1.2.2(a)(i) - A report issued by an Accredited Testing Laboratory - AWTA - Australian Wool

Testing Authority (NATA accreditation No. 1356) & R&D Services, Inc. (IAS accreditation No. TL-566)

2. Fire Resistance Assessment - Volume 1 - A0.5(a)/A2.2(a)(iv) and Volume 2 - 1.0.5(a)/1.2.2(a)(i) - A report issued by an Accredited Testing Laboratory - AWTA - Australian Wool Testing

Authority (NATA accreditation No. 1356)

3. Damp and Weatherproofing Assessment – Volume 1 – A0.5(a)/A2.2(a)(v) and Volume 2 – 1.0.5(a)/1.2.2(a)(iii) – A report issued by an appropriately qualified person – AWTA –

Australian Wool Testing Authority.

B2 Reports

1. James M Fricker Pty Ltd – Report i297a (dated 19th May 2009). This report contains the results of testing to AS/NZS 4859.1 and the consequential calculations to determine the

thermal resistance of the materials.

2. R&D Services – Review of Thermal Insulation Evaluations. (Dated May 8 2009). This report contains confirmation that the results of testing to AS/NZS 4859.1 and the thermal

resistance of the materials has been appropriately undertaken.

3. Australian Wool Testing Authority Ltd – Test for Pliable membranes and underlays – Surface water Absorbency. Test No. 15-004576 (dated August 17th, 2015). This report

provides the results to AS/NZS 4200.1-1994 and states compliance. (INSULBREAK 65)

4. Australian Wool Testing Authority Ltd – Test for Flammability of Materials. Test No. 17-006718 (dated 1th December 2017). This report provides the results of testing to AS

1530.2-1993 and specifies the product obtained a Flammability Index of 1 (INSULBREAK 65).

5. Australian Wool Testing Authority Ltd – Test for Flammability of Materials. Test No. 18-000457 (dated 5th February 2018). This report provides the results of testing to AS 1530.2-

1993 and specifies the product obtained a Flammability Index of 3 (INSULBREAK 80).

6. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 15-004578 (dated 17th August 2015). This report provides the results of testing to

AS/NZS 4200.1-1994 and states the product obtained a “PASS” (INSULBREAK 65).

7. Australian Wool Testing Authority Ltd – Test for Edge Tearing Resistance of Building Membranes and Underlays. Test No. 15-004577 (dated 18st September 2015).

This report provides the results of testing to AS/NZS 4200.1-1994 (INSULBREAK 65).

8. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 15-004579 (dated 20st September 2015). This report provides

the results of testing to AS3706.4-2012 (INSULBREAK 65)

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 8 of 12

9. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 17-003728 (dated 21st July 2017). This report provides the

results of testing to AS3706.4-2012 (INSULBREAK 80)

10. Australian Wool Testing Authority Ltd – Test for Resistance to Water Penetration of Building Membranes and Underlays. Test No. 16-000608 (dated 18th February 2016). This

report provides the results of testing to AS/NZS 4201.4-1994 (INSULBREAK 65).

11. Australian Wool Testing Authority Ltd – Test for Resistance to Shrinkage of Building Membranes and Underlays. Test No. 16-000609 (dated 10th March 2016). This report

provides the results of testing to AS/NZS 4201.3-1994 (INSULBREAK 65).

12. R&D Services – Water Vapour Transmission measurement according to ASTM E96. Report No. RD17142 (dated 15th February 2017). This report provides the test results to ASTM

test method E96 (INSULBREAK 65).

13. Australian Wool Testing Authority Ltd – Test for Water Vapour Transmission Water Method. Test No. 15-006350 (dated 18rd March 2016). This report provides the results of

testing to ASTM E96-2012 (INSULBREAK 80).

14. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 16-000627 (dated 23st February 2016). This report provides the

results of testing to AS3706.4-2012 (INSULWHITE)

15. Australian Wool Testing Authority Ltd – Test for Resistance to Surface Corrosion and Wet Delamination at Elevated Ambient Temperatures (Reflective Insulations). Test No. 17-

003724 (dated 10th August 2017). This report provides the results of testing to AS/NZS 4859.1-2002 (INSULBREAK/INSULWHITE/GLARESHIELD XL).

16. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 17-003729 (dated 18th July 2017). This report provides the results of testing to AS/NZS

4200.1-1994 and states the product obtained a “PASS” (INSULBREAK 80).

17. Australian Wool Testing Authority Ltd – Test for Edge Tearing Resistance of Building Membranes and Underlays. Test No. 17-003730 (dated 20th July 2017). This report provides

the results of testing to AS/NZS 4200.1-1994 (INSULBREAK 80).

18. Australian Wool Testing Authority Ltd – Test for Resistance to Water Penetration of Building Membranes and Underlays. Test No. 17-003727 (dated 19th July 2017). This report

provides the results of testing to AS/NZS 4200.1-1994 (INSULBREAK 80).

19. Australian Wool Testing Authority Ltd – Test for Resistance to Surface Corrosion and Wet Delamination at Elevated Ambient Temperatures (Reflective Insulations). Test No. 17-

003724 (dated 10th August 2017). This report provides the results of testing to AS/NZS 4859.1-2002 and indicates a “PASS” for Wet Delamination and Surface Corrosion

(INSULBREAK/GLARESHIELD XL/INSULWHITE).

20. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays - Shrinkage. Test No. 17-003733 (dated 1st August 2017). This report provides the results of

testing to AS/NZS 4201.3-1994 and states the product complies (INSULBREAK 80).

21. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays – Surface Water Absorbency. Test No. 17-003731 (dated 19th July 2017). This report provides

the results of testing to AS/NZS 4200.1-1994 and states the product achieves a High classification (INSULBREAK).

22. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays – Surface Water Absorbency. Test No. 16-000621 (dated 18th February 2016). This report

provides the results of testing to AS/NZS 4201.6-1994 (INSULWHITE).

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 9 of 12

23. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 16-000626 (dated 18th February 2016). This report provides the results of testing to

AS/NZS 4201.1-1994 and states the product obtained a “PASS” (INSULWHITE).

24. Australian Wool Testing Authority Ltd – Test for Resistance to Water Penetration of Building Membranes and Underlays. Test No. 16-000620 (dated 19th February 2016). This

report provides the results of testing to AS/NZS 4201.4-1994 (INSULWHITE).

25. Australian Wool Testing Authority Ltd – Test for Edge Tearing Resistance of Building Membranes and Underlays. Test No. 16-000625 (dated 23rd February 2016). This report

provides the results of testing to AS/NZS 4200.1-1994 (INSULWHITE).

26. Australian Wool Testing Authority Ltd – Test for Water Vapour Transmission Water Method. Test No. 16-000619 (dated 4rd March 2016). This report provides the results of

testing to ASTM E96-2012 (INSULWHITE).

27. Australian Wool Testing Authority Ltd – Test for Resistance to Shrinkage of Building Membranes and Underlays. Test No. 16-000623 (dated 10th March 2016). This report

provides the results of testing to AS/NZS 4201.3-1994 (INSULWHITE).

28. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 16-005506 (dated 20st October 2016). This report provides the

results of testing to AS3706.4-2012 (GLARESHIELD XL)

29. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays – Surface Water Absorbency. Test No. 16-005510 (dated 21th October 2016). This report

provides the results of testing to AS/NZS 4201.6-1994 (GLARESHIELD XL).

30. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 16-005507 (dated 21th February 2016). This report provides the results of testing to

AS/NZS 4201.1-1994 and states the product obtained a “PASS” (GLARESHIELD XL).

31. Australian Wool Testing Authority Ltd – Test for Edge Tearing Resistance of Building Membranes and Underlays. Test No. 16-005508 (dated 26th October 2016). This report

provides the results of testing to AS/NZS 4200.1-1994 (GLARESHIELD XL).

32. Australian Wool Testing Authority Ltd – Test for Resistance to Water Penetration of Building Membranes and Underlays. Test No. 16-005511 (dated 27th October 2016). This

report provides the results of testing to AS/NZS 4201.4-1994 (GLARESHIELD XL).

33. Australian Wool Testing Authority Ltd – Test for Water Vapour Transmission Water Method. Test No. 16-005512 (dated 3rd November 2016). This report provides the results of

testing to ASTM E96-2012 (GLARESHIELD XL).

34. Australian Wool Testing Authority Ltd – Test for Resistance to Shrinkage of Building Membranes and Underlays. Test No. 16-005509 (dated 17th November 2016). This report

provides the results of testing to AS/NZS 4201.3-1994 (GLARESHIELD XL).

35. Australian Wool Testing Authority Ltd – Test for Flammability of Materials. Test No. 17-007339 (dated 8th January 2018). This report provides the results of testing to AS 1530.2-

1993 and specifies the product obtained a Flammability Index of 1 (GLARESHIELD XL).

36. Australian Wool Testing Authority Ltd – Test for Flammability of Materials. Test No. 17-006719 (dated 5th December 2017). This report provides the results of testing to AS

1530.2-1993 and specifies the product obtained a Flammability Index of 1 (PERMIFLOOR).

37. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays – Surface Water Absorbency. Test No. 18-002080 (dated 24th April 2018). This report provides

the results of testing to AS/NZS 4201.6-1994 (PERMIFLOOR).

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 10 of 12

38. Australian Wool Testing Authority Ltd – Test for Resistance to Water Penetration of Building Membranes and Underlays. Test No. 18-002084 (dated 24th April 2018). This report

provides the results of testing to AS/NZS 4201.4-1994 and shows a “FAIL” result. (PERMIFLOOR).

39. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 18-002083 (dated 24th April 2018). This report provides the results of testing to AS/NZS

4201.1-1994 and states the product obtained a “PASS” (PERMIFLOOR).

40. Australian Wool Testing Authority Ltd – Test for Edge Tearing Resistance of Building Membranes and Underlays. Test No. 18-002082 (dated 30th April 2018). This report provides

the results of testing to AS/NZS 4200.1-1994 (PERMIFLOOR).

41. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 08-002081 (dated 30st April 2018). This report provides the

results of testing to AS3706.4-2012 (PERMIFLOOR)

42. Australian Wool Testing Authority Ltd – Test for Water Vapour Transmission Water Method. Test No. 18-002079 (dated 08th May 2018). This report provides the results of testing

to ASTM E96-2012 (PERMIFLOOR).

43. Australian Wool Testing Authority Ltd – Test for Resistance to Shrinkage of Building Membranes and Underlays. Test No. 18-002078 (dated 11th May 2018). This report provides

the results of testing to AS/NZS 4201.3-1994 (PERMIFLOOR).

44. Australian Wool Testing Authority Ltd – Test for Resistance to Surface Corrosion and Wet Delamination at Elevated Ambient Temperatures (Reflective Insulations). Test No. 18-

002065 (dated 18th May 2018). This report provides the results of testing to AS/NZS 4859.1-2002 and indicates a “PASS” for Wet Delamination and Surface Corrosion

(PERMIWALL/PERMISHIELD/PERMIFLOOR).

45. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 18-005516 (dated 25th October 2016). This report provides the

results of testing to AS3706.4-2012 (PERMISHIELD 80)

46. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 18-002069 (dated 30th April 2018). This report provides the

results of testing to AS3706.4-2012 (PERMISHIELD 65)

47. Australian Wool Testing Authority Ltd – Test for Flammability of Materials. Test No. 17-007342 (dated 8th January 2018). This report provides the results of testing to AS 1530.2-

1993 and specifies the product obtained a Flammability Index of 5 (PERMICAV XV).

48. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 7-597469-NW (dated 21st May 2014). This report provides the results of testing to

AS/NZS 4201.1-1994 and states the product obtained a “PASS” (PERMICAV/PERMIWALL).

49. Australian Wool Testing Authority Ltd – Test for Resistance to surface corrosion and Wet Delamination at Elevated ambient temperatures (reflective insulations). Test No. 17-

003722 (dated 10th August 2017). This report provides the results of testing to AS/NZS 4859.1-2002 (PERMICAV XV).

50. Australian Wool Testing Authority Ltd – Test for Flammability of Materials. Test No. 17-007343 (dated 9th January 2018). This report provides the results of testing to AS 1530.2-

1993 and specifies the product obtained a Flammability Index of 1 (PERMISHIELD 80).

51. Australian Wool Testing Authority Ltd – Test for Flammability of Materials. Test No. 17-007347 (dated 9th January 2018). This report provides the results of testing to AS 1530.2-

1993 and specifies the product obtained a Flammability Index of 1 (PERMISHIELD 65).

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 11 of 12

52. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 16-005517 (dated 21st October 2016). This report provides the results of testing to

AS/NZS 4201.1-1994 and states the product obtained a “PASS” (PERMISHIELD 80).

53. Australian Wool Testing Authority Ltd – Test for Resistance to Dry Delamination. Test No. 18-002070 (dated 24th April 2018). This report provides the results of testing to AS/NZS

4201.1-1994 and states the product obtained a “PASS” (PERMISHIELD 65).

54. Australian Wool Testing Authority Ltd – Test for Edge Tearing Resistance of Building Membranes and Underlays. Test No. 16-005518 (dated 26th October 2016). This report

provides the results of testing to AS/NZS 4200.1-1994 (PERMISHIELD 80).

55. Australian Wool Testing Authority Ltd – Test for Edge Tearing Resistance of Building Membranes and Underlays. Test No. 17-002075 (dated 30th April 2018). This report provides

the results of testing to AS/NZS 4200.1-1994 (PERMISHIELD 65).

56. Australian Wool Testing Authority Ltd – Test for Water Vapour Transmission of Building Membranes and Underlays. Test No 16-005522 (dated 3rd November 2016). This report

provides the results of testing to ASTM E96-2012 (PERMISHIELD 80).

57. Australian Wool Testing Authority Ltd – Test for Water Vapour Transmission of Building Membranes and Underlays. Test No 18-002071 (dated 8th May 2018). This report

provides the results of testing to ASTM E96-2012 (PERMISHIELD 65).

58. Australian Wool Testing Authority Ltd – Determination of California Bearing Ratio (CBR) Plunger Method. Test No. 16-006541 (dated 21st December 2016). This report provides

the results of testing to AS3706.4-2012 (PERMICAV XV)

59. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays - Shrinkage. Test No. 16-005519 (dated 17th November 2016). This report provides the results

of testing to AS/NZS 4201.3-1994 and states the product complies (PERMISHIELD 80).

60. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays - Shrinkage. Test No. 18-002073 (dated 11th May 2018). This report provides the results of

testing to AS/NZS 4201.3-1994 and states the product complies (PERMISHIELD 65).

61. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays – Surface Water Absorbency. Test No. 16-005520 (dated 21st October 2016). This report

provides the results of testing to AS/NZS 4201.6-(PERMISHIELD 80).

62. Australian Wool Testing Authority Ltd – Pliable Building Membranes and underlays – Surface Water Absorbency. Test No. 18-002074 (dated 24th April 2018). This report provides

the results of testing to AS/NZS 4201.6-(PERMISHIELD 65).

63. Australian Wool Testing Authority Ltd – Test for Resistance to Water Penetration of Building Membranes and Underlays. Test No. 16-006538 (dated 20th December 2016). This

report provides the results of testing to AS/NZS 4201.4-1994 (PERMISHIELD 80).

64. Australian Wool Testing Authority Ltd – Test for Resistance to Water Penetration of Building Membranes and Underlays. Test No. 18-002068 (dated 2nd May 2018). This report

provides the results of testing to AS/NZS 4201.4-1994 (PERMISHIELD 80).

65. Surface Optics Corporation – Test for Infra-Red Emittance. Job No. 4962MP (dated 4th November 2015). This report provides the results of testing to ASTM E-408

(PERMICAV/PERMIWALL/PERMISHIELD).

66. Australian Wool Testing Authority Ltd – Edge Tearing Resistance of Building Materials and Underlays. Test No. 16-006543 (dated 21st December 2016). This report provides the

results of testing to AS 4200.1-1994 for Permicav XV.

Certificate number: CM20029 This certificate is only valid when reproduced in its entirety. Page 12 of 12

67. Australian Wool Testing Authority Ltd –Resistance to Dry Delamination. Test No. 16-006542 (dated 20th December 2016). This report provides the results of testing to AS/NZS

4201.1-1994 for Permicav XV.

68. Australian Wool Testing Authority Ltd –Resistance to Water Penetration. Test No. 16-006539 (dated 21st December 2016). This report provides the results of testing to AS/NZS

4201.4-1994 for Permicav XV.

69. Australian Wool Testing Authority Ltd – Surface Water Absorbency. Test No. 16-006544 (dated 20th December 2016). This report provides the results of testing to AS/NZS 4201.6-

1994 for Permicav XV.

70. Australian Wool Testing Authority Ltd – Water Vapour Transmission. Test No. 16-006545 (dated 24th January 2017). This report provides the results of testing to ASTM E96-2012

for Permicav XV.

71. Australian Wool Testing Authority Ltd – Shrinkage. Test No. 16-006546 (dated 12th January 2017). This report provides the results of testing to AS/NZS 4201.3-1994 for Permicav

XV.

72. R & D Services – Thermal Resistance Measurement According to ASTM C518 on Kingspan Insulation Pty Ltd. Report No. RD17533 (dated 24th July 2017). This report provides the

results of testing to ASTM C518-10 using a heat-flow metre for Insulbreak 65 and Permishield 65.

73. R & D Services – Thermal Resistance Measurement According to ASTM C518 on Kingspan Insulation Pty Ltd. Report No. RD17518-R1 (dated 25th July 2017). This report provides

the results of testing to ASTM C518-10 using a heat-flow metre for Insulbreak 80 and Permishield 80.

74. R & D Services – Thermal Resistance Measurement According to ASTM C518 on Kingspan Insulation Pty Ltd. Report No. RD17532 (dated 25th July 2017). This report provides the

results of testing to ASTM C518-10 using a heat-flow metre for Glareshield 12 XL/Permicav/Permiwall/Insulwhite.

75. R & D Services – Thermal Resistance Measurement According to ASTM C518 on Kingspan Insulation Pty Ltd. Report No. RD15048 (dated 28th January 2015). This report provides

the results of testing to ASTM C518-10 using a heat-flow metre for Permifloor.