NEWAir-injector flat spray nozzles ID3

Aeration effect

Liquid

AirAir

Nozzle body

Injector

Dosing orifice

Mouth piece

LEC

HLE

R O-ring

ID3 ID3-C

Featuresn Air-aspirating flat-spray nozzlen Nozzle sizes 01 through 08n Pressure range: ID-01 to -015 : 3.0 to 8.0 bar

ID-02 to -08 : 2.0 to 8.0 barn Extremely low drift potential for whole pressure rangen Significantly improved deposition structure thanks toaerated droplets

n Combines with IS end nozzle (of equal size), for shar-ply defined edges

n Fits all bayonet cap systems with 10 mm AF andthreaded caps (Ø 12.6 mm)

Range of applicationn Application of plant protectants and growth regulatorsn Particularly well-suited for application of liquid fertilizer(UAN); pressure range for pure UAN: 2.0 to 4.0 bar

Benefits of ID3 nozzlesn More solid design of nozzle body by filed construction- 0.9 cm shorter in comparison to ID range- Improved protection of nozzle tip by reinforced sidewalls- Easier cleaning of nozzle body by smooth transition

n Plane injector orifice - Easy wipe away of residues and dirt- Toolless removal and assembly of injector e.g. for cleaning purpose- Correct alignment of injector into the nozzle bodyby inside catch - Safe sealing between injector and nozzle bodyby o-ring

n Long injector design responsible for high drift stability- Reduced fine droplet fraction also at higher pressure- Increased work rate at higher speeds- Even better adaption of sprayer speed and l/ha-rate without changing of nozzles- Application in due time even under worse weather conditions- For use at wind speeds up to 5 m/s according to good agricultural practice - Potential of 90 % drift reduction at 2.0 bar

n Proved materials such as POM or ceramic availabledepending on application conditions

n Non sensitive towards clogging due to big cross sectionsn Very good deposition structure and crop-canopypenetration ensures high biological performance

Removable injector

Ø 14,8

2

SW 10

33

Spray angle: 120° Material: POM, ceramic

6

Hex 10

Ø 14.8

ARABLE CROPS

G 1965G 1966G 1968G 1969G 1970

G 1971G 1972G 1973G 1974

the newnozzle-generation

Lechler ID3 are rated in

several countries for dr

ift

reduction 90/75/50 %

Current list under www

.lechler-agri.com

Spray table for air-injector flat spray nozzles ID3

Matching air-injector off centernozzles IS, see page 28

n Spray pressure at the nozzle tip (gaugedwith a diaphragm valve).

n The stated liter-per-hectare rates apply towater.

n Prior to each spraying season, verify thetable data by gauging the flow rates.

n Make sure that all nozzles have the samesettings.

BCPC/ASABEDroplet size classification

VF Very fineF FineM MediumC CoarseVC Very coarseEC Extreme Coarse

Classifications are subject to change

Sample order Type + spray angle + int’l nozzle size + material = order number ID3 120° 025 (POM) = ID-120-025ID3 120° 025 C (ceramic) = ID-120-025C

7

ARABLE CROPS

l/ha

5.0km/h

6.0km/h

7.0km/h

8.0km/h

10.0km/h

12.0km/h

14.0km/h

16.0km/h

18.0km/h[bar]

l/min

ID-120-01(80/60 M)

ID-120-015(60 M)

ID-120-02(60 M)

ID-120-025(60 M)

ID-120-03(60 M)

ID-120-04(60 M)

ID-120-05(25M)

ID-120-06(25 M)

( )

ID-120-08(25 M)

0.390.450.510.550.600.640.590.680.760.830.900.960.650.800.921.031.131.221.300.810.991.151.281.401.521.620.971.191.371.531.681.811.941.291.581.822.042.232.412.581.611.972.282.552.793.013.221.932.362.733.053.343.613.862.583.163.654.084.474.835.16

94108122132144154142163182199216230156192221247271293312194238276307336365389233286329367403434466310379437490535578619386473547612670722773463566655732802866926619758876979107311591238

78901021101201281181361521661801921301601842062262442601621982302562803043241942382743063363623882583163644084464825163223944565105586026443864725466106687227725166327308168949661032

67778794103110101117130142154165111137158177194209223139170197219240261278166204235262288310333221271312350382413442276338391437478516552331405468523573619662442542626699766828885

5968778390968910211412513514498120138155170183195122149173192210228243146179206230252272291194237273306335362387242296342383419452483290354410458501542579387474548612671725774

475461667277718291100108115789611012413614615697119138154168182194116143164184202217233155190218245268289310193236274306335361386232283328366401433463310379438490536580619

394551556064596876839096658092103113122130819911512814015216297119137153168181194129158182204223241258161197228255279301322193236273305334361386258316365408447483516

333944475155515865717782566979889710511169859911012013013983102117131144155166111135156175191207221138169195219239258276165202234261286309331221271313350383414442

3.04.05.06.07.08.03.04.05.06.07.08.02.03.04.05.06.07.08.02.03.04.05.06.07.08.02.03.04.05.06.07.08.02.03.04.05.06.07.08.02.03.04.05.06.07.08.02.03.04.05.06.07.08.02.03.04.05.06.07.08.0

26303437404339455155606443536169758187546677859310110865799110211212112986105121136149161172107131152170186201215129157182203223241257172211243272298322344

2934384145484451576268724960697785929861748696105114122738910311512613614697119137153167181194121148171191209226242145177205229251271290194237274306335362387

BCPC/ASABE

0,5 m

ECVCVCCCMECVCVCCCMECECVCVCCCMECVCCCCMMECVCCCCMMECVCCCCMMECVCCCCMMECECVCVCVCCCECECVCVCVCCC