agom case study
TRANSCRIPT
AGOM INTERNATIONAL SRL CASE STUDY
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 07/01324
MOSE project for Venice flood protection
Agom E-Link bearings
Figures:
- Location: Venice, Italy – Bocche di Malamocco e San Lorenzo - Owner: Consorzio MOSE - Contractor: GLF - Grandi Lavori Fincosit - Consultant / Consulting engineer: Technital - Date: 2008-2009
Involving of Agom International srl: Agom has designed, manufactured and supplied more than 2000 E-Link bearings for supporting the monolithic concrete caissons.
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 08/00260 – 07/01197
PARALLEL ROADS 3B/4
Agom V-Max pot bearings
Figures:
- Location: UAE – Dubai - Owner: RTA Road and Transport Authority - Dubai - Contractor: DUTCO TENNANT - Design: Parallel Roads Contract 3B and Contract 4 - Consultant / Consulting engineer: Parsons - Total Number of Bridges: 30 - Date: 2008-2010
Involving of Agom International srl: Agom has designed, manufactured and supplied 500 Pot bearings according to AASHTO LRFD code, with vertical load up to 28000 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 07/00262
AVE ROVER ALCISA TORREJONCILLO ABIA DE LA ABISPALIA
Agom Hydraulic Shock Transmission Units (STU) devices
Figures:
- Location: Spain - Owner: Administrador de Infraestructuras Ferroviarias (Adif) - Contractor: Rover Alcisa - Total Bridge length: 1060 m + 850 m - Date: 2009
Involving of Agom International srl: Agom has designed, manufactured and supplied
- nr 20 Hydraulic Shock Transmission Units (STU) devices o Force: 2500 kN o Movement: 850 mm o The device has been tested on the independent laboratory of the Eucentre Pavia
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Device installation on viaduct abutment
Device static and dynamic test at independent laboratory of Eucentre Pavia
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 08/00945
AVE LA ALCORAYA UTE VIADUCTO A7 ESTRUCTURA 1-2
VIADUCTO PLA DE LA VALLONGA Agom E-Link elastomeric bearings & V-Max pot bearing
Figures:
- Location: Spain - Alcoraya - Owner: Ministerio do Fomento - Contractor: Rover Alcisa - Total Bridge length: ?? mt - Date: 2008
Involving of Agom International srl: Agom has designed, manufactured and supplied
- nr 64 V-Max pot bearings with various combinations of loads - nr 22 E-Link elastomeric bearings
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01634
WAFI CITY BRIDGE Agom V-Max, Highway expansion joints
Figures:
- Location: UAE – Dubai - Owner: RTA - Contractor: China State Construction Enrg. Corp. - Design: Overpass bridge - Consultant / Consulting engineer: Consult Maunsell - Date: 2007
Involved of Agom International srl: Agom has designed, manufactured and supplied
- nr 11 mt AGFLEXJ 80 mm - nr 11 mt AGFLEXJ 140 mm - nr 14 V-Max Pot Bearings with vertical load up to 7000 kN designed according to
AASHTO standard
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 07/00681
DOMOSPORT LAMIA Agom E-Link elastomeric bearings
Figures:
- Location: Greece – Lamia - Owner: ERGOSE (National Railway Administration) - Contractor: Domosport S.A. - Design: Construction of two bridges at the Stalida – Malia section - Consultant / Consulting engineer: Edafomichaniki ATE – SHW Beradente Ingeniure - Total Bridge length: 400 mt - Width of superstructure: 14 mt - Date: 2007
Involved of Agom International srl: Agom has designed, manufactured and supplied
• Nr 48 E-Link C4 850x850x391(216)
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01210
KOURTIDIS CRETE Agom E-Link elastomeric bearings and expansion joints
Figures:
- Location: Greece – Crete Island - Owner: Hellenic Ministry for the Environment, Physical Planning and Public Works - Contractor: Kourtidis S.A. - Design: Construction of two bridges at the Stalida – Malia section - Consultant / Consulting engineer: Technical Research Group - Total Bridge length: 125 mt - Width of superstructure: 15 mt - Date: 2006 - 2007
Involved of Agom International srl: Agom has designed, manufactured and supplied
• Nr 208 E-Link C5 400x300x127 (80) • Mt 60 Highway Expansion joint AGFLEXJ 160
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01572 – 06/01727
ATTIKAT PANAGIA BRIDGES G1 AND G2 Agom V-Max, E-Link and H-Max
Figures:
- Location: Greece – Panagia - Owner: Egnatia Odos - Contractor: Attikat S.A. - Design: Panagia – Grevena bridges - Consultant / Consulting engineer: DOMI Partnership Consulting Engineers - Total Bridge length: G1 280 mt / G2 350 mt - Width of superstructure: 15 mt - Date: 2007
Involved of Agom International srl: Agom has designed, manufactured and supplied
- nr 130 E-Link elastomeric bearings Type C4 600x500x271 (143) - nr 40 E-Link elastomeric bearings Type C4 600x500x226 (110) - nr 68 E-Link elastomeric bearings Type BP 400x240x45 (24) - nr 2 V-Max Pot Bearings AGPM 4000/650/20 - nr 3 V-Max Pot bearings AGPF 12000-2500-2500 - nr 2 H-Max Horizontal load bearings HLBG /650 -1900
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
-
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/00741
MALAKASI BRIDGE G7 Agom V-Max, E-Link & H-Max bearings
Figures:
- Location: Greece - Malakasi - Owner: Egnatia Odos - Contractor: Mochlos S.A. - Design: Construction of bridge G7 - Consultant / Consulting engineer: Technical Research Group - Total Bridge length: 300 mt - Width of superstructure: 15 mt - Date: 2007
Involved of Agom International srl: Agom has designed, manufactured and supplied
• Nr 4 V-Max Pot bearings AGPM 5400/517/20 • Nr 2 H-Max Horizontal load bearings HLBG / 517-1500 • Nr 4 E-Link Elastomeric bearing Type BP 700x600x90(50)
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 07/00599
SUSPENSION BRIDGE OVER RIVER EBRO Agom V-Max pot bearing with H-Safe devices
The suspension bridge over river Ebro is the entering door of the city of Amposta (Tarragona).
The suspension bridge, whose project was commissioned to engineer J. Eugene Ribera, begun in 1915 and opened in 1921 by General Primo de Rivera. In March 1938, in the middle of civil war, it was bombed and destroyed, so that the Ebro was saved by a passing boat which later, sank under the weight of the tanks Republicans in his retirement in April 1938.
After the war, the bridge was reconstructed and reopened in 1941
Two 24 mt height stoned towers with the shape of triumph arch are the main features of these bridge in which the steel structure is suspended to iron cables.
The suspension bridge has been for several years the only one crossing point over the last section of Ebro river and has became one of the symbol of the town of Amposta.
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Figures:
- Location: Spain – Amposta Tarragona - Owner: Ministerio do Fomento – Direccion General de Carreteras
Demarcacion de Carreteras del Estado en Cataluna - Contractor: UTE AMPOSTA (drace - geocisa - trabajos especiales zut) - Design: Seismic protection of the suspension bridge over River Ebro - Consultant / Consulting engineer: PROES Ingenieros Consultores - Main span: 135 mt - Date: 2007
Involved of Agom International srl: Agom has designed, manufactured and supplied
- nr 4 V-Max pot bearings with H Safe devices: AGPL 700/200-180 - 1400 o Max vertical load: 700 kN o Max Trasversal load: 180 kN o Displacement:: 200 mm o Max Longitudinal load under seismic event: 1400 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 04/00705
TRIESTE’S CATTINARA VIADUCT
Agom Pot bearing CNR 10018
Figures:
- Location: Italy, Trieste City - Owner: ANAS - Contractor: Collini Spa, Cossi - Design: Construction of two steel beam bridges - Consultant / Consulting engineer: INCO Engineering - Milano - Utilization: Connection Trieste City – Venice Highway - Total Bridge length: 330 mt - Width of superstructure: 11 mt - Piles height: 50 mt - Date: Summer 2005
Involved of Agom International srl: Agom has designed, manufactured and supplied different type of pot bearings with sloped upper steel plates: - n°2 AGPT 5000 - 1900 / 20 (P%) - n°2 AGPF 5000 - 1910 - 1910 (P%) - n°2 AGPL 17000 / 70 - 1800 (P%) - n°2 AGPL 17000 / 160 - 1800 (P%) - n°2 AGPL 17000 / 240 - 1800 (P%) - n°2 AGPM 14000 / 70 / 20 (P%) - n°2 AGPM 14000 / 160 / 20 (P%) - n°2 AGPM 14000 / 240 / 20 (P%) - n°2 AGPL 5000 / 300 - 500 (P%) - n°2 AGPM 5000 / 300 / 20 (P%)
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 08/01141
PRIVATE BUILDING SEISMIC BASE ISOLATION Agom E-Safe LRB lead rubber bearing and AGPM slider pot bearings
Figures:
- Location: Milano - Italy - Owner: Nero Mistrel S.r.l. - Contractor: Nero Mistrel S.r.l. - Design: Prof. Mazzola - Consultant / Consulting engineer: Ing. Battaini - Total Building floors: 6 - Date: 2009
Involved of Agom International srl: Agom has designed, manufactured and supplied
- nr 15 E-Safe LRB 500x233 lead rubber bearing - nr 14 AGPM 1750/200/200 slider pot bearings Agom has designed the seismic isolation system and performed the dynamic analysis of the isolated structure. The device has been tested on the independent laboratory of the Eucentre Pavia
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Building construction phases
Device dynamic compression and shear test at independent laboratory of Eucentre Pavia
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 07/00263
AVE Valdestillas Agom pot bearing BS 5400
Figures:
- Location: Spain – Valdestillas-Río Duero (Valladolid) - Owner: Administrador de Infraestructuras Ferroviarias (Adif) - Contractor: Azvi - Design: Nuevo acceso ferroviario de Alta Velocidad al Norte y Noroeste de España.
Tramo: Valdestillas-Río Duero . “Viaducto Adaja”, “Viaducto Cega” y “Viaducto Duero”
- Date: 2007 Involved of Agom International srl: Agom has manufactured and supplied
- Pot bearings with vertical load 21.000 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 09/00157
VIADUCTO VIA AUXILIAR (NUEVA) DE FERROCARRIL Agom H-Safe devices
Figures:
- Location: Spain – Al Alcoraya - Alicante - Owner: Administrador de Infraestructuras Ferroviarias (Adif) - Contractor: Rover Alcisa - Design: Seismic protection of high speed railway viaduct - Consultant / Consulting engineer: SIEGRIST Y MORENO S.L.
Total Bridge length: 100 mt - Date: 2009 -
Involved of Agom International srl: Agom has designed, manufactured and supplied
- nr 4 H-Safe viscous dampers: H-Safe VD 2200/160
o Max reaction force : 2200 kN o Displacement:: 160 mm o The device has been tested on the independent laboratory of the Politecnico of
Milano o Agom have performed the seismic non linear dynamics analyses of the structure to
verify the dampers response in term of force, displacement and velocity o The devices keep the bridge fixed for service loads and keep the force constant for
high intensity earthquakes with high energy dissipation to minimize the movement
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
� Device installation on viaduct abutment
� Device static and dynamic test at independent laboratory of the Politecnico of Milano
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 07/00472
AVE Gabaldón – Villanueva de la Jara POT BEARINGS
� Location : Gabaldón – Villanueva de la Jara (Cuenca) � Owner : Administrador de Infraestructuras Ferroviarias (ADIF)
� Contractor : Dragados
� Design : Línea de Alta velocidad Madrid – Castilla la Mancha – Comunidad
Valenciana – Región de Murcia. Tramo: Gabaldón – Villanueva de la Jara. “Viaducto LAV sobre la autovía A-3”
� Date: 2005
Max vertical load 6,700 kN Horizontal load > 15% V
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 09/00276
Doha NCC Carpark Agom AGFLEXJ Expansion Joints
Figures:
- Location: Doha – Qatar - Contractor: MAN ENTERPRISE QATAR - Design: Expansion Joints between the concrete slabs - Total joint length: 500 mt - Date: 2009
Involved of Agom International srl: Agom has designed, manufactured and supplied
- More than 500 meters of Agflexj Expansion Joint J140 Displacement: 140 mm (+/- 70)
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/00646.
DURRAT AL BAHRAIN
Agom steel reinforced elastomeric bearing AASHTO
Figures:
- Location: Bahrain - Owner: Kingdom of Bahrain’s Government and Kuwait Finance House (Bahrain). - Customer: Degussa Construction Chemicals UAE LLC - Design: Construction of bridges: - Date: April 2006
Involved of Agom International Srl: Agom has designed, manufactured and supplied:
- nr 720 reinforced elastomeric bearing (type 1 CR 60 ShA) 450 X 350 X 114 - nr 52 reinforced elastomeric bearings (type 1 CR 60 ShA) 450 X 400 X 129
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01562
Bahrain Financial Harbor (project 03-901)
Agom pot bearing and expansion joints BS 5400
Bahrain Financial Harbour (BFH) is a master planned development aiming to create a complete financial city, a self contained community, in the centre of Manama, Kingdom of Bahrain. The Bahrain Financial Harbour Development Project covers a prime seafront property where reclamation and infrastructure development will be undertaken. The property will be developed into a diversified range of office, residential, retail, leisure and dining components that will cater to all needs.
A USD 1.3 billion integrated master-planned development, the Bahrain Financial Harbour will be home to the entire value chain in the financial services sector.
Figures:
- Location: Manama northern seashore of the main island of the Kingdom of Bahrain - Owner: B.F.H. - Contractor: Ahmed Mansoor Al-A'Ali Co - Design: Unique waterfront development designed for commercial, residential and
leisure purposes - Consultant / Consulting engineer: Africon - Number of bridge: 4 - Date: 2007
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Involved of Agom International srl: Agom has designed manufactured and supplied: Bridge nr 1
- Nr 4 AGPM 8300/100/30 - Nr 2 AGPL 8300/100-2500 - Nr 2 AGPT 18500-3500/30 - Nr 4 AGPF 18500-3500-3500 - Nr 4 AGPM 18500/150/30 - Nr 2 AGPL 18500/150-4100 - Nr 4 AGPM 8300/200/30 - Nr 2 AGPL 8300/200-2500 - Mt 46.80 AGFLEXJ 100 ± 50 mm
Bridge nr 2
- Nr 6 AGPT 4500-750/30 - Nr 2 AGPF 4500-1000-250 - Nr 6 AGPM 4500/90/30 - Nr 2 AGPL 4500/90-250 - Mt 45.00 AGFLEXJ 50 ± 25 mm
Bridge nr 3
- Nr 4 AGPM 5000/100/20 - Nr 1 AGPL 5000/100-2000 - Nr 2 AGPT 5000-1000/20 - Nr 3 AGPF 5000-1000-1000 - Mt 23.40 AGFLEXJ 50 ± 25 mm
Bridge nr 4 - Nr 6 AGPT 4500-750/30 - Nr 2 AGPF 4500-1000-250 - Nr 6 AGPM 4500/90/30 - Nr 2 AGPL 4500/90-250 - Mt 32.80 AGFLEXJ 50 ± 25 mm
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Key Features: Unique waterfront development designed for commercial, residential and leisure purposes. - 30 individual development units, spreading over
380,000m² of reclaimed land offering office, residential, retail, dining & leisure space.
- The Financial Centre, the hub of all monetary activities includes the Dual Towers, the Financial Mall, and the Harbour House
- Ample lifestyle options with up-market residences, retail and leisure outlets including a luxury hotel and the Bahrain Performance Centre
- Exciting alternatives for relaxation with an array of seafront walkways, shopping boulevards, promenades, a marina, water pathways, water taxis, coffee shops and dining facilities.
- Urban Structured Planning ensuring prime location - A Hydrodynamic Study used to assess the impact of the
reclamation project on the seawater environment, showed that the proposed new shoreline posed no flushing problems and the sediments from the dredging operations also proved non problematic.
- A Traffic Impact Study was also commissioned to calculate additional traffic and its impact on the existing traffic situation. Based on the findings, appropriate infrastructure developments have been proposed to meet the high flow.
Strengths Unique ownership framework based on freehold and strata title. - Single window for financial institutions' licensing and
registration process. - Unique waterfront and marine access. - Holistic lifestyle offering living, working, retail, dining and
leisure facilities. - Structurally and architecturally designed to balance
aesthetics with practical functionality. - Fulfilling corporate social responsibility by instituting
environmentally sound practices such as controlled reclamation, construction and hydro-dynamically designed marina to ensure seawater quality.
- Efficient water supply, electricity supply and drainage systems in place.
- Convenient vehicular access with well-developed road network plans.
- Ample indoor parking area based on international standards.
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01823
BAHRAIN MAP JUNCTION INTERCHANGE Agom AGFLEXJ Expansion Joints
Figures:
- Location: Bahrain - Owner: Kingdom Of Bahrain
Ministry of Works and Housing - Contractor: NASS - Design: Carriageway Expansion Joints with kerb units - Consultant / Consulting engineer: Parsons - Total Joint length: 45 mt - Date: 2009
Involved of Agom International srl: Agom has designed, manufactured and supplied
- Agflexj Expansion Joint J250 Displacement: 250 mm (+/- 125)
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01569
INTERCHANGE S.S. 43 FAI DELLA PAGANELLA ULULONE BRIDGE
Agom High Damping Rubber Bearings (HDRB) and Joints
Figures:
- Location: Italy: Mezzolombardo (TN) - Owner: Region Trentino, Italy - Contractor: Impresa Collini Spa - Design: Construction of a seismic isolated bridge. - Consultant / Consulting engineer: In.Co. - Utilization: overpass of Ululone river (Italy). - Date: 2006-2007
Involved of Agom International srl: Agom has designed, manufactured and supplied:
- nr 2 High damping rubber bearings Ø 1100X337 mm: max Vertical Load 14.000 kN - nr 6 High damping rubber bearings Ø 1000X337 mm: max Vertical Load 11.000 kN - nr 6 High damping rubber bearings Ø 500x233 mm: max Vertical Load 2.900 kN - AGFLEXJ 200/200S expansion joints
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/00216
SPOLETO- REGIONAL STRATEGIC CENTRE
Agom E-Safe Seismic Isolators Figures:
- Location: Italy: Spoleto - Owner: Region Umbria, Italy - Contractor: Torelli Dottori Spa - Design: Construction of a seismic isolated building. - Consultant / Consulting engineer: RA Consulting - Utilization: the conservation, maintenance and development of historical and artistic goods of
Umbria region (Italy). - Date: 2006-2007
Involved of Agom International srl: Agom has designed and manufactured:
- nr 32 Seismic Isolators AGOM E-Safe Ø 850x396 mm: max Vertical Load 4.780 kN - nr 17 free sliding bearings: max Vertical Load 4.780 kN
Tests:
- Type tests performed by CESI Laboratory – Seriate (Italy) - Acceptance tests performed by EUCENTRE – Pavia (Italy)
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 07/00867
NICOSIA- Shacolas Emporium Park Shopping Mall-Lot 3
Agom E-Safe Elastomeric Bearing (HDRB)
ITTL Trade Tourist & Leisure Park Ltd, a 100% subsidiary of Woolworth (Cyprus) Properties Public Ltd, is the owner of a property with an area of 102.000sq.m. in a prime location in Athalassa - Nicosia. In this property, the Shacolas Emporium Park is currently under development, a modern shopping mall with international specifications where the customer will combine shopping with leisure.
In the Shacolas Emporium Park Shopping Mall there will be a wide variety of well known retail brands in different shops. There will be a Debenhams Department Store, a Hypermarket of a well known multinational company in the sector, various fashion brands of various well known and successful international chains, a large shop with sports apparel and equipment, shops offering various other services, a multiplex cinema, restaurants and coffee shops. The total area available for use is 27.000sq.m.
In the same area there will also operate a large furniture store IKEA of the well known Swedish chain. The building will be built by the IKEA franchisee at his own cost.
Further, in order to meet the great demand for retail space in the Shacolas Emporium Park, two more building are being developed of a total leasable area of about 12.000sq.m.
In the green area of the Shacolas Emporium Park the «Mana Square» will be built in honor to the Cypriot Mother and a small amphitheatre for cultural events.
The total parking space in the total Shacolas Emporium Park area will exceed 2.500.
All the above buildings are expected to be completed and operational in the second half of 2007.
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Figures:
- Location: Cyprus: Nicosia - Owner: ITTL Trade Tourist & Leisure Park Ltd - Contractor: Vert & Blanc - Design: Construction of a seismic isolated building. - Consultant / Consulting engineer: Redesco srl, Ing Giuliani - Utilization: Exhibition area - Date: 2007
Involved of Agom International srl: Agom has designed and manufactured:
- nr 22 High damping rubber bearings (HDRB) Ø 500x198 mm: max Vertical Load 2.900 kN, Horizontal movement ± 120 mm, Damping factor: 16%
- nr 48 free sliding pot bearings: max Vertical Load 6.000 kN - nr 12 Rubber bampers Ø 500
Tests:
Type and acceptance tests performed by EUCENTRE – Pavia (Italy)
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/00115
Lysaker Stasjon
Agom pot bearing BS 5400
Lysaker Station is Norway's third-largest railway station, located at Lysaker on Drammenbanen. The station serves regional, local and Airport Express trains. It opened in 1872, and is located 7.00 km west of Oslo and at 7.5 meters elevation. As of 2006, the owner and operator, Jernbaneverket is in the process of renovating the station. The station is located between Skøyen (to the east) and Stabæk, but when the new Askerbanen is finished expanded to Lysaker in 2011, the station will be connected to Sandvika. There are more than one thousand daily bus departures from Lysaker Station and within 800 meters there are 20,000 jobs with an additional 10-15,000 in development. All local and regional trains that operate west of Skøyen stop at the station, in addition to three-hourly Airport Express Trains to Oslo Airport, Gardermoen. In 2006 the process of renovating the station began, with estimated investments of NOK 1 billion. Lysaker Station is planned to be one of the most important stations west of Oslo, and is to continue as a local connection point for public transport. The construction work consists of renovating the station building, expanding the present track from two to four tracks and building a terminus under the existing tracks for the proposed automated light rail Forbunebubanen to Fornebu. The construction work is planned to be completed in 2009 and two years later Askerbanen will be finished between Lysaker and Sandvika
Figures:
- Location: Lysaker - Norway - Owner: Jernbaneverket (Norwegian National Rail Administration) - Contractor: DSI DYWIDAG Systems International AS - Design: Building a new railway station - Consultant / Consulting engineer: Norconsult - Date: 2006
Involved of Agom International srl: Agom has designed, manufactured and supplied: - Nr 1 AGPF 3000-3400-3400 - Nr 1 AGPM 4500/20/20 - Nr 1 AGPM 11000/40/20 - Nr 1 AGPM 10000/40/20 - Nr 1 AGPM 13000/70/20 - Nr 1 AGPM 12000/70/20 - Nr 1 AGPM 11500/110/20
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
- Nr 1 AGPM 10000/110/20 - Nr 1 AGPM 8500/120/20 - Nr 1 AGPM 7000/120/20 - Nr 1 AGPL 8000/20-2900 - Nr 1 AGPL 4500/140-2400 - Nr 1 AGPM 3500/140/20 - Nr 2 AGPF 1600-560-560 - Nr 2 AGPL 1600/100-536 - Nr 7 AGPM 5600/100/20 - Nr 3 AGPM 4560/100/20 - Nr 2 AGPM 1600/100/20 - Nr 2 AGPT 1600/20-400
The necessity of installing the bearings on a very small piles has required a specific design of the subsidiary steel fixing plates.
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
UTE AVE CASTELLBISBALL EL PAPIOL LOT 1 Agom pot bearing BS 5400
Figures:
- Location: Papiol (Barcelona) - Spagna - Owner: Administrador de Infraestructuras Ferroviarias (Adif) - Contractor: Papiol Ute (Dragados – Vias) - Design: Nuevo acceso ferroviario de alta velocidad AVE. Tramo: Castellbisbal –
Papiol (Barcelona) - Consultant / Consulting engineer: Administrador de Infraestructuras Ferroviarias
(Adif) - Date: year 2005
Involved of Agom International srl: Agom has designed, manufactured and supplied: - Nr 38 V-Max Pot Bearings with Max Vertical load 11500 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 05/1011
HA'MACHTSEVA BRIDGE
Agom sliding elastomeric bearing EN 1337-3
Figures:
- Location: Israel The quarries near Ichsel Junction - Owner: National Roads Company Ltd - Contractor: Solel Boneh Ltd - Design: Construction of two parallel bridges - Consultant / Consulting engineer: Kedmor Engineers Ltd from Tel- Aviv - Total Bridge length: 400 mt - Width of superstructure: 10.8 mt - Date: April 2006
Involved of Agom International srl: Agom has designed, manufactured and supplied:
- nr 8 reinforced elastomeric bearing (type 4E) temporary free sliding Ø 900x240 with adjusting devices
- nr 8 reinforced elastomeric bearings free sliding Ø 750x170 with top sliding plates - nr 8 reinforced elastomeric bearings free sliding Ø 550x69 with top sliding plates - nr 8 reinforced elastomeric bearings free sliding Ø 750x170 with top sliding plates - nr 8 reinforced elastomeric bearings free sliding 400x250x52 with top sliding plates - nr 120 launching pads
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/00861
Overseas Bridge At Shershah – Pakistan Agom E-Safe LRB, V-Max Pot Bearing, Highway joint
Figures:
- Location: Pakistan – Sharashah - Owner: Highways and Government Department - Contractor: ECIL - Design: Revamping and seismic protection of a bridge - Consultant / Consulting engineer: Hyperstatic Engineering Design Civil and
Structural Engineering - Cypros - Date: 2006
Involved of Agom International srl: Agom has designed, manufactured and supplied
- nr 4 Lead Core Rubber Bearings E-Safe LRB ø700 x 166 - nr 32 Lead Core Rubber Bearings E-Safe LRB ø500 x 96 - nr 16 V-Max AGPM 16000/250/50 - nr 20 mt AGFLEXJ 250
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 05/01024
AUTOVIA DEL DUERO. N-122 DE ZARAGOZA A PORTUGAL – TRAMO VARIANTE DE AGREDA
Agom pot bearing BS 5400
Figures:
- Location: Agreda (Soria) - Spain - Owner: Ministero de Fomento - Contractor: UTE AGREDA (Pavimentos asfálticos Salamanca - Fernández
Constructor) , ULMA - Design: Construction of a bridge – viaducto 2 - Consultant / Consulting engineer: Idom - Date: 2005
Involved of Agom International srl: Agom has designed, manufactured and supplied: - NR 2 AGPM 3500/270/20 - NR 2 AGPL 3500/270 - 350 - NR 2 AGPM 7000/240/20 - NR 2 AGPL 7000/240 - 700 - NR 2 AGPM 8000/210/20 - NR 2 AGPL 8000/210 - 800 - NR 2 AGPM 8000/280/20 - NR 2 AGPL 8000/280 - 800 - NR 2 AGPM 7000/290/20 - NR 2 AGPL 7000/290 - 700 - NR 2 AGPM 3500/310/20 - NR 2 AGPL 3500/310 - 350
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 03/01299
HIGH SPEED RAILWAY
Agom railway expansion joints, elastomeric bearings and seismic devices
Figures:
- Location: Italy - Owner: R.F.I. - Contractor: Pizzarotti – Impregilo – Itinera – Condotte - Sub Contractor: Alga spa - Design: Railway viaducts and overpasses - Consultant / Consulting engineer: Italferr - Date: 2004 – 2005 - 2006
Involved of Agom International srl: Agom has manufactured:
- More then 1500 mt of dielectric railway expansion joint - More then 800 unit of dielectric reinforced rubber cover plates - More then 4.000 unit of elastomeric seismic restraint - More then 1.500 unit of elastomeric bearings
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01074
BOTTEGO BRIDGE
Agom longitudinal expansion joint AGLJ with AGRIP system
Figures:
- Location: Italy – Parma city - Owner: Comune di Parma - Contractor: Impresa Iembo Michele - Design: Bridge widening - Consultant / Consulting engineer: Politecnica - Bologna - Utilization: Connection of two sides of the City of Parma - Total Bridge length: 120 mt - Width of superstructure: 20 mt - Date: Dicember 2006
Involved of Agom International srl: Agom has designed, manufactured, supplied and installed:
- nr 2 lines of 108 mt longitudinal expansion joints AGLJ with AGRIP system with: o transversal movement: ± 15 mm o longitudinal movement: unlimited o vertical movement: ± 25 mm
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 99/00440
GRAND HOTEL VIADUCT
Agom elastomeric bearings and anti seismic devices
Figures:
- Location: Autoruth Beyruth - Frontier Sylenn; Saoufar – Mdeirej East - Owner: C.E.G.P. - Conseil Executif des Grands Projets - Contractor: Toto Costruzioni - Design: Construction of two viaducts - Date: 1999 - 2000
Involved of Agom International srl: Agom has manufacture:
- Nr 20 anti seismic devices: reinforced elastomeric bearing type 4EA 700x500x390 - nr 44 anti seismic devices: reinforced elastomeric bearings with free sliding plates
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01111
KAVALA
Agom elastomeric bearing and expansion joints
Figures:
- Location: Greece – Kavala - Greece - Owner: Egnatia Odos - Contractor: Attikat Ate - Design: Construction of nr 7 bridges - Consultant / Consulting engineer: Obermeyer - Planen and Beraten - Total Bridge length: mt 20,100,80,40,100,80,70 - Width of superstructure: mt 15,15,15,15,15,15,23 - Date: April 2006
Involved of Agom International srl: Agom has designed, manufactured and supplied:
- nr 4 reinforced elastomeric bearing (type 4) 500X300X101(32) - nr 8 reinforced elastomeric bearing (type 4) 450X350X136(44) - nr 4 reinforced elastomeric bearing (type 4) 600X450X151(55) - nr 28 reinforced elastomeric bearing (type 4) 500X400X196(88) - nr 28 reinforced elastomeric bearing (type 4) 500X400X226(110) - mt 16 Expansion Joints AGFLEXJ 140 – movement ±70 mm - mt 76 Expansion Joints AGFLEXJ 160 – movement ±80 mm - mt 46 Expansion Joints AGFLEXJ 200 – movement ±100 mm
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/00305
NATIONAL ROAD OF ATHENS-SALONICA
Agom elastomeric bearings
Figures:
- Location: Greece – Lamia - Owner: Eyde - Pathe - Contractor: Athena SA – Mechaniki SA - Design: Construction of a bridge - Consultant / Consulting engineer: Karanikolas - Total Bridge length: mt 90,90 - Width of superstructure: mt 18 - Date: September 2006
Involved of Agom International srl: Agom has designed, manufactured and supplied:
- Nr 216 elastomeric bearings Type 5 450X350X166 (110): vertical load 2360 kN - Nr 12 elastomeric bearings Type 1 450X350X54 (38) : vertical load 2360 kN - Nr 108 elastomeric bearings Type 1 200X250X30 (21) : vertical load 625 kN - Nr 112 elastomeric bearings Type 1 400X250X41 (29) : vertical load 1250 kN - Nr 12 elastomeric bearings Type 1 400X250X52 (37) : vertical load 1250 kN - Nr 12 elastomeric bearings Type 1 300X200X52 (37) : vertical load 750 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/01276
VARANDEY OFFSHORE TERMINAL
Agom Sea-fastening bearings units
Seaway Heavy Lifting has transported and installed the Varandey FOIROT (Fixed Offshore Ice Resistant Oil Terminal) for Lukoil Kaliningradmomeft using the 2500 ton Heavy Lift Vessel “Stanislav Yudin”. The installation has been done in the Barents Sea, Russia. The steel Base Structure, with a weight of approximately 11.000 ton has been transported on a submersible cargo barge. Five grillage beams have been placed on the cargo deck, onto which the Base Structure has been settled down. In order to sufficiently spread the transportation loads, Agom has manufactured special elastomeric blocks that have been placed between the grillage beams and the Base Structure. In addition, special elastomeric double stoppers have been positioned on the four corners to restrain the Base Structure during transportation.
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
Figures:
- Location: Russia: Barents sea - Owner: Lukoil Kaliningradmomeft - Contractor: Lukoil Kaliningradmomeft - Design: Heavy lift vessel - Consultant / Consulting engineer: Seaway Heavy Lifting Engineering BV - Utilization: Transport and installation of an Offshore Ice resistant Oil Terminal - Date: 2007
Involved of Agom International srl: Agom has designed, manufactured and supplied:
- nr 75 single Support bearings units max Vertical Load 3.200 kN - nr 25 double Sea-fastening bearings units max Vertical Load 5.500 kN
Each support bearing consists of one or two laminated rubber blocks vulcanised onto a steel base plate provided with suitable fixing holes. Each rubber block is built up using special natural rubber layers reinforced with steel layers.
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 06/00351
AVE Enova – Pobla Llarga Agom pot bearing BS 5400
Figures:
- Location: Spain – Enova – Pobla Llarga (Valencia) - Owner: Administrador de Infraestructuras Ferroviarias (Adif) - Contractor: Corsan Coviam - Design: Nuevo acceso ferroviario de Alta Velocidad de Levante. Tramo: Enova –
Pobla Llarga . “Viaducto Barxeta ancho RENFE” y “Viaducto Barxeta ancho L.A.V” - Date: 2006
Involved of Agom International srl: Agom has manufactured and supplied
- Pot bearings: vertical load 8000 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 05/00788
KASHAGAN EAST FIELD DEVELOPMENT PROJECT
Agom Shear dampers
One of the largest discoveries of the decade and possibly one of the most challenging, the project faced not only the technical difficulties of extracting the oil in the harsh climate but also the political and geopolitical altercations associated with the region. Because of these hurdles, the original production date which was predicted to be 2005 was postponed to 2008 or possibly 2009. Figures:
- Location: Kashagan, Caspian Sea, Kazakhstan - Owner: ENI – Exxon Mobil – Total – Shell – ConoccoPhillips - Contractor: Progeco Srl - Consultant / Consulting engineer: Eng Gino Capelli - Design: Construction of on offshore platform - Utilization: Oil extraction - Date: February 2006
Involved of Agom International srl: Agom has designed, manufactured and supplied shear dampers for bucket and base frame for the up-ending of the barges foundation piles.:
- nr 1 steel reinforced curved rubber strip 2285x300x110 - nr 8 rubber dampers Ø 600 mm, height 200 mm - nr 2 rubber stoppers 300x300x160 mm - nr 2 rubber stopper 1200x300x110 mm
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 04/00919
ANTALYA AIRPORT
Agom Lead Core Rubber Bearings
Figures:
- Location: Turkey – Antalya - Owner: D.H.M.I - Contractor: Alga Spa – ERSE Construction Company - Design: Antiseismic retrofitting of the existing Airport - Consultant / Consulting engineer: O.D.T.Ü - Date: year 2004
Involved of Agom International Srl Agom has manufactured:
- Nr 33 Lead Core Rubber Bearings Φ350Χ241 - Nr 133 Lead Core Rubber Bearings Φ400Χ187 - Nr 8 Lead Core Rubber Bearings Φ400Χ238 - Nr 125 Lead Core Rubber Bearings Φ500Χ314 - Nr 62 Lead Core Rubber Bearings Φ600Χ204 - Nr 62 Lead Core Rubber Bearings Φ600Χ314 - Nr 16 Lead Core Rubber Bearings Φ700Χ353
Nr
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 03/00182.
CORINTH CANAL REILWAY BRIDGE
Agom Lead Core Elastomeric Bearing (LRB)
Figures:
- Location: Greece: Isthmos - Owner: Hellenic Railways Organisation (OSE), Greece - Contractor: Alga Spa - Design: Construction of one railway bridge - Consultant / Consulting engineer: George Gazetas from Athens - Utilization: Railway line between Athinai and Korinthos - Date: June 2003
Involved of Agom International srl: Agom has manufactured:
- nr 4 Lead core rubber bearing 1000x1100x450 mm: max Vertical Load 16.000 kN - nr 20 Lead core rubber bearing 1000x1100x230 mm: max Vertical Load 16.000 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 01/2071.
EGYPT – OFFSHORE PLATFORM NURSA A & B
Agom rubber gaskets for gas plants
Figures:
- Location: Egypt - Owner: Petrobel - Contractor: Nuova Olmec srl - Design: Construction of on offshore platform - Utilization: Gas - Date: 2001
Involved of Agom International srl: Agom has manufactured and supplied large rubber gaskets
- nr 8 rubber gaskets Øext 1050 mm, Øint 600 mm , thickness 25 mm
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY # 99/00001.
YATAGUN DEVELOPMENT PROJECT
Agom Shear dampers
Figures:
- Location: Malaysia , Yatagun - Contractor: P.T. McDermott Indonesia - Customer: Saipem UK LTD - Owner: Premier Petroleum Myanmar Ltd. - Design: Construction of on offshore platform - Utilization: Natural Gas - Date: 1999
Involved of Agom International srl: Agom has manufactured and supplied shear dampers for bucket and base frame for the up-ending of the barges foundation piles.:
- nr 8 rubber dampers Ø 600 mm, height 200 mm
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
CASE STUDY 00/00263.
BRAZIL OFFSHORE PLATFORM “EMILIO”
Agom Shock pads
Figures:
- Location: Brazil , Atlantic ocean - Owner: Saipem - Agip - Contractor: Nuova Olmec srl - Design: Construction of the offshore platform “EMILIO” - Utilization: Oil extraction - Date: July 2000
Involved of Agom International srl: Agom has manufactured and supplied shear dampers for bucket and base frame for the up-ending of the barges foundation piles.:
- nr 4 shock pads Ø 1030 mm, height 540 mm – 7000 kN
Ideas, engineering and manufacture
Agom International srl – Via Mesero, 12 – 20010 Ossona (MI) – Italy Ph. +39 029029111 – Fax +39 029010201 – e-mail:[email protected] – www.agom.it
MORE THAN 40 YEARS EXPERIENCE DESIGNING AND MANIFACTURING
DEVICES FOR CONSTRUCTION, OFFSHORE AND INDUSTRIAL MARKETS
Bridge bearings
• Elastomeric Bridge
bearings
• Pot bearings
• Spherical bearings
• Incremental Launching
bearings
• Horizontal load
bearings
• Special bearings
Seismic Isolators
• High damping rubber
bearings
• Lead core rubber
bearings
• Multilayer rubber
bearings
• Shock transmitters
• Shock absorber
• Rubber dampers
Expansion joints
• Elastomeric joints
• Joints for high
movements
• Finger joints
• Buried joints
• Railway joints
Services
• Design
• Consulting
• On site assistance
• Installations
• Tests
• Inspection
AGOM INTERNATIONAL SRL Via Mesero, 12 – 20010 Ossona (MI) - Italy
PH.: +39 02 9029111 – FAX: +39 02 9010201 www.agom.it - e-mail: [email protected]
BRIDGES
VIADUCTS
OFFSHORE
INDUSTRY