advanced test equipment rentals - atecorp.com · • oc-12, oc-3 and oc-1 intermediate or...
TRANSCRIPT
HP E4480ACERJAC 156MTSTest Set
Installation andMaintenance Testingfor SONET, ATMand T-Carrier
H
Advanced Test Equipment Rentalswww.atecorp.com 800-404-ATEC (2832)
®
Established 1981
The Complete, Easy-To-UseSONET, ATM and T-Carrier Test Set
2
Your Single Solution
The portable CERJAC 156MTSprovides complete SONET, ATMand T-Carrier testing from OC-12to DS0.
The unique design of the CERJAC156MTS lets you choose from awide array of options to supportyour requirements as they expandand evolve.
AUTO SETUP
With one touch ofthe AUTO SETUPkey, the CERJAC156MTS identifiesthe input signal andbegins synchronization.
TROUBLESCAN
A single stroke ofthe TROUBLESCANkey initiates scan-ning of the inputsignal and reportingof a hierarchical list of alarms anderrors.
LEDs
The well-designed front panel LEDs of the CERJAC 156MTS provide users with quick, “at a glance” informa-tion on status, alarm and error conditions of SONET, ATM and T-Carrier signals.
156MTS SONET Testing Capability
ATM
Patterns
ATM
622.08 Mbps
OC-12STS-12
51.84 Mbps
SPE-12c
SPE-3c
ATM
VT-Group
44.736 Mbps
x7
Patterns
Patterns
155.52 Mbps
OC-3STS-3
OC-1
STS-1
EC-1
SPE-1
ATM
DS3 E1
VT1.5
x7
DS1x4 x1
x28x21
Patterns
ATM
DS0x30 or x31
Patterns
ATM
2.048 Mbps
Tones
Patterns
64/56 Kbps
1.544 Mbps
x24
x3
x12 x4
SONET, ATM and T-Carrier Test Setfor Today and Tomorrow
3
Physical Interfaces• OC-12, OC-3 and OC-1 intermediate or
long-reach optical interfaces. 1310nmand 1550nm
• STS-1, DS3, DS1 and E1 ports• BITS input and output• DS1 slips reference• RS-232 and RS-422 data links• Numerous clock, data and error inputs
and outputs
Remote Operation
and Software Upgrades• Field-downloadable software upgrades
via RS-232 interface• Graphical remote front panel software• Graphical remote event logging
software• Graphical remote DS3 pulsemask
software• RS-232 and HP-IB SCPI interfaces
User Interface
• “AUTO SETUP” and “TROUBLE SCAN”buttons
• High contrast 12 line LCD display• Complete front panel alarm, status and
error LEDs• User-controlled test set-up and result
storage in non-volatile memory• Data/event logging• RS-232 printer interface
SONET• STS-12c and STS-3c clear channel BERT
testing• Transmission and multiplex testing.• Alarm stimulus/response testing.• SONET overhead and trace bytes
programming and display• DS3/DS1/E1/DS0 and VT1.5/DS1/DS0
tributary testing• STS-1 jitter measurements• DS1 sync status message testing
ATM• STS-12c, STS-3c and STS-1 testing• DS3 HEC and PLCP testing• DS1 and E1 testing• QoS testing• Cross cell BERT testing
T-Carrier• DS3, DS1, E1 and DS0 BERT testing• DS3/DS1/DS0 mux testing• DS3/E1/DS0 mux testing• FT1 and FE1 testing• DS1 in-band and out-of-band loopcode
testing• DS1 CDI testing• DS3 pulsemask measurements• DS3, DS1 and E1 jitter measurements• Dual DS3 testing
Test Applications
4
Development
With a complete set of advanced SONET, ATM and T-Carrier features,the CERJAC 156MTS is the ideal test tool for development and verifica-tion of new designs. The STS-12c and STS-3c clear channel testing andDS3/E1 mux testing capability of the CERJAC 156MTS simplifies testingof the newest high-capacity network elements.
Production
Extensive SONET, ATM and T-Carrier capabilities make the 156MTS aclear choice for production test. The instrument’s modular design, in-depth OC-12 through DS0 test tools and new ATM capabilities provide asuperior test platform for verifying new and emerging products.
Deployment
With its AUTO SETUP and TROUBLE SCAN capabilities, the CERJAC156MTS represents the industry’s leading solution for installation,qualification and maintenance of complex SONET, ATM or T-Carriernetworks. Whether in the central office, the outside plant or at thecustomer premise, the 156MTS provides an all-in-one portable, ruggedtest set that can stand up to years of demanding field use.
5
SONET Testing
STS-12c and STS-3c
BERT Testing
The STS-12c and STS-3c clearchannel BERT testing capabilitiesof the CERJAC 156MTS aredesigned to verify advancedequipment and services that aremapped directly or carried as atributary of higher rate signals.
SONET Alarm Testing
The SONET Alarm testing capa-bilities of the CERJAC 156MTScan monitor and generate a fullcomplement of SONET alarms forsection, line or path terminatedequipment.
OC-12, OC-3, OC-1 or STS-1
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
OC-192, OC-48 or OC-12
LTE
156MTS
156MTS
OC-12 or OC-3
LOS, LOFor AIS-L AIS-P
RDI-P
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
6
Pointer Testing
The CERJAC 156MTS cangenerate and monitor SONETpointer movements to simulateand measure network conditions.
APS Testing
The CERJAC 156MTS can monitorand generate the APS K1/K2 bytesand inject errors in a pass-thruconfiguration to simulate networkconditions. APS switch time canbe determined by measuring theeffects on the payload.
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
SONETMUX
SONETMUX
OC-12
OC-3 OC-3
OC-12SONETADM
156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
SONET Testing
DS3 Tributary Testing
The CERJAC 156MTS provides fullDS3 multiplexing anddemultiplexing capability to testDS3’s directly mapped into OC-12,OC-3, OC-1 or STS-1 SONETsignals.
VT1.5 Tributary Testing
The CERJAC 156MTS providesVT1.5A (async) and VT1.5B (bytesync) mapping and demappingcapability to test DS1 tributariesmapped directly into OC-12, OC-3,OC-1 or STS-1 SONET signals.
7
SONET Testing
DS3/SONETMUX
VTMUX
OC-12DS3
Ch 1
Ch 2
Ch 28
VT1.5STS-1
Ch 1.1
Ch 2.1
Ch 4.7
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
8
BITS (Building Integrated
Timing Supply)
The CERJAC 156MTS can betimed to a T1/BITS signal or it canderive T1 timing from an OC-12,OC-3, OC-1 or STS-1 signal when aBITS source is not available.
Overhead / Path Trace
The CERJAC 156MTS displays andcontrols a complete set of SONEToverhead, including the 64bytepath trace.
SONET Testing
OC-12
OC-3 OC-3
OC-12SONETADM
T1/BITS
T1/BITS
T1 TIMING
SONETMUX
OC-12OC-3
Ch 1.1
Ch 2.1
Ch 3.4
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
Ring Testing
The CERJAC 156MTS can beinserted in a SONET ring in apass-thru mode to add Section,Line and Path errors and alarms toverify proper ring operation underfailure and degraded conditions.
Data Communication Channel
(DCC) Testing
The CERJAC 156MTS can dropand insert either the SONETSection (192 kb/s) or Line(576 kb/s) DCC to an externalprotocol analyzer to monitor andgenerate management informa-tion. To maintain proper SONETlink operation, the DCC can be“passed thru” the test set, whileperforming BERT or drop andinsert test functions.
9
SONETELEMENT
SONETELEMENT
PROTOCOLANALYZER
Tx Rx
OC-12 or OC-3RING
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
SONET Testing
10
Cross Cell BERT
The CERJAC 156MTS STS-12cATMtesting option enables user tostress the newest ATM switchesand services that carry ATM trafficat 622Mbps. A standard suite ofcell BERT patterns with AAL0mappings is available to stress testATM at rates up to 100%bandwidth on a user selectableVPI, VCI, PT, CLP and GFC.
ATM Error and Alarm Testing
In addition to the SONET errorand alarm testing capability, theCERJAC 156MTS STS-12c/ATMtesting option also enables usersto generate and monitor ATMerrors and alarms to verify theperformance of high speed ATMswitches. The CERJAC 156MTS’sATM test capability includesSCNR, LOP, HCS bit, HCS byteand pattern error monitoring andgeneration.
ATM Testing at STS-12c
ATMSWITCH
ATMSWITCH
NETWORK
OC-48OC-48
OC-12C
ATMSWITCH
OC-12C
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
LOOPBACK
Cross Cell BERT
The CERJAC 156MTS AdvancedATM testing option enables usersto stress ATM switches with STS-3c, STS-1, DS3, E1 and DS1 ATMpayloads. The flexible multiplex-ing capability of the CERJAC156MTS enables the user to fullytest ATM payloads with higherrate signals. Examples includetesting STS-3c carried within anOC-12/3c mapped signal, or a DS3-ATM payload carried within anOC-12/DS3 mapped signal or aDS1-ATM payload carried withinOC-3/VT1.5 mapped signal.
Multiple Cell Streams
The CERJAC 156MTS AdvancedATM testing option enables theuser to load an ATM switch withone foreground and up to fourbackground CBR or VBR cellstreams. The foreground channelcan be configured as AAL0, AAL1or test cell with a cross cell BERTor fixed pattern for QoS measure-ment. The background channelscan be configured as AAL3/4,AAL5 or idle cell streams withfixed patterns.
11
ATM Testing at STS-3c,STS-1, DS3, E1 and DS1
ATM PAYLOADS:STS-3c, STS-1,
DS3, E1 and DS1
ATMSWITCH
OC-3-ATM
ATMSWITCH
TRANSPORT SIGNAL:
OC-12, OC-3, OC-1
STS-1
DS3
DS1/E1
BACKGROUNDSTREAMS
FOREGROUNDSTREAM
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
ATMSWITCH
NETWORK
LOOPBACK
12
VPI/VCI Cell Scan
The CERJAC 156MTS AdvancedATM testing option enables usersto rapidly scan the incoming signalfor active VPI/VCI’s and report theassociated bandwidths.
OAM Testing
The CERJAC 156MTS AdvancedATM testing option provides OAMmonitoring and generation of VP(F4) and VC (F5) flows for RDI(Yellow) and AIS alarms. Frontpanel LEDs provide quick andeasy OAM status.
13%
ATMSWITCH
BANDWIDTH OF CELL STREAM
50%
12%13%
13%
ATMSWITCH
ATMSWITCH
NETWORK
OAM CELL
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
ATM Testing at STS-3c,STS-1, DS3, E1 and DS1
Cell Inter-arrival Time
Measurement
The CERJAC 156MTS AdvancedATM testing option can measurethe cell inter-arrival time, animportant QoS parameter forvideo and circuit emulationapplications. For a selected VPI/VCI, the typical, minimum andmaximum cell inter-arrival timesare measured.
Cell Transfer Delay
Measurement
The CERJAC 156MTS AdvancedATM testing option can alsomeasure the cell transfer delay inan ATM network, another impor-tant QoS parameter for real timeapplications. For a selected VPI/VCI, the typical, minimum andmaximum cell transfer delay timesare measured.
13
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
ROUND TRIP TIMEIS CALCULATED
ATMSWITCH
NETWORK
SELECTEDVPI/VCI
ATMSWITCH
NETWORK
LOOPBACK
ATMSWITCH
CTD ( t) = t1-t0
t0
t1
CELL IS TIMESTAMPED
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
Minimum Typical Maximum
156MTS
ATM Testing at STS-3c,STS-1, DS3, E1 and DS1
14
DS3 BERT Testing
The CERJAC 156MTS DS3 testingoption enables users to performfull bandwidth BERT testing onunframed, M13 and C-Bit framedDS3’s. BPV, Frame, Data and Data/parity error generation andmonitoring is provided tocompletely test the DS3. Two testsets are used to simultaneouslyverify the circuits end-to-endwithout loopback.
DS3 FEAC
The CERJAC 156MTS DS3 testingoption also enables the user tomonitor and generate DS3 FarEnd Alarm and Control (FEAC)codes. Activating and deactivatingDS3 and DS1 loopbacks orsending status and alarm codescan be inserted continuously or inbursts.
DS3 Testing
DSX-3mon
in
out
DSX-3mon
in
out
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
NETWORK
DSX-3mon
in
out
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
DS3NIU
156MTS 156MTS
156MTS
NETWORK
DS3/DS1 MUX Testing
The CERJAC 156MTS DS3 andDS1 testing options enable theuser to perform full 3:1 multi-plexer testing. A full complimentof BERT patterns, tones, error,alarm and loopcode monitoringand generation capability isprovided to fully qualify DS3/DS1channelized circuits.
DS3/E1 MUX Testing
The CERJAC 156MTS DS3 and E1testing options enable the user toperform full DS3/E1 multiplexertesting. A full compliment ofBERT patterns, tones, error, alarmand loopcode monitoring andgeneration capability is providedto fully qualify each of the 21 E1’schannelized in a DS3 circuit.
15
DSX-3
mon
in
out
mon
in
out
DSX-1
mon
in
out
DS1DS3
DS3E1
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
M13 MUX
DSX-3
mon
in
outDS3/E1 MUX
DS3 Testing
16
Dual DS3 Testing
The CERJAC 156MTS dual DS3option enables the user tosimultaneously monitor both sidesof a full duplex DS3 circuit. Asecond DS3 BERT transmitterenables the user to perform dualDS3 BERT testing tosimultaneously verify a full duplexDS3 circuit.
DS3/DS1 and DS3/E1
Pass Thru Testing
The CERJAC 156MTS dual DS3and DS1 (or E1) options enablethe user to drop and add a DS1 (orE1) pattern to DS3 while passingthrough the remaining 27 DS1 (or20 E1) channels. The second DS3receiver is used to monitor theDS1 (or E1) multiplexed in thereturned DS3.
DS3-BDS3-A
DSX-3
mon
in
out
DS3-B
DS3-A
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
3/1/0DCS
DSX-3
mon
in
outM13MUX NETWORK
DSX-3
mon
in
outM13 MUXNETWORK
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
156MTS
Dual DS3 Testing
DS1 and E1 BERT Testing
The CERJAC 156MTS DS1 and E1options enable the user to performfull bandwidth BERT testing onESF, D4, and SLC96 (TS0,TS0+CRC, TS0/16 and TS0/16+CRC for E1) framed andunframed circuits provisioned forAMI or B8ZS (HDB3 for E1).Standard PRBS, QRSS, 55 octet,fixed and user programmablepatterns are provided. Two testsets are used to simultaneouslyverify the circuits end-to-endwithout loopback.
Fractional T1/E1 and
DS0 Testing
The CERJAC 156MTS DS1 or E1options enable testing of frac-tional T1 and E1 services. From 1to 23 (30 or 31 for E1) contiguousor non-contiguous DS0’s can betested. DS0 tone generation andDS0 frequency and level measure-ments are provided to test V/Fservices. Pass-thru capabilityenables testing to be performedon a selected DS0 while theremaining 23 DS0’s (29 or 30 DS0’sfor E1) channels are passedthrough.
17
DSX-1
mon
in
out
DSX-1
mon
in
outNETWORK
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
ATM
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
DSX-1
mon
in
out DS1CSUNETWORK
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
DS-1 LOOPBACK156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
ATM
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1 and E1 Testing
18
DS1 and E1 Error and
Alarm Testing
The CERJAC 156MTS DS1 and E1options enable the user to performa full suite of error and alarmtesting including LOS, BPV, frame,AIS, yellow, pattern and CRCgeneration and monitoring. Frontpanel LEDs illuminate to quicklyand easily report status, alarm andhistory conditions.
Clock Slip Measurement
The CERJAC 156MTS DS1 and E1options also enable the user tomeasure the relative direction anddelta clock frequencies of the T1’s(or E1’s).
DSX-1
mon
in
out DS1CSUNETWORK
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
PBX
DSX-1
mon
in
outDS1CSU NETWORK
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
ROUTER
156MTS
156MTS
DS1 and E1 Testing
In-Band and Out-of-Band
Loopcodes
The CERJAC 156MTS DS1 optionhas the capability to decode andencode loop-up and loop-downcodes for in-band and out-of-banddevices using standard built-inand user-programmable patterns.
Sync Status Messages
The CERJAC 156MTS DS1 optionprovides the user with the abilityto display and generate theSONET sync status messageswhich are transported in the T1BITS clock ESF data link.
19
DSX-1
mon
in
out
DS1CSU
NETWORK
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
BASESTATION
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
T1/BITS
3/1/0DCS
156MTS
T1 SIGNAL
SYNC STATUS MESSAGES
156MTS
DS1 Testing
20
Jitter Measurement
The CERJAC 156MTS can provideSTS-1, DS3 and DS1 wideband andhighband jitter measurements toCCITT G.823, TR253 and TR499.
DS3 Pulse Mask Measurement
The CERJAC 156MTS DS3 pulsemask measurement capabilityenables the user to compare thereceived DS3 signal to ANSIT1.102, ANSI T1.404, BellcoreTR499 and CCITT G.703 pulsetemplates. Additional DS3 signalmeasurements include rise time,fall time, imbalance, amplitudeand width of both the positive andnegative pulses.
Jitter and DS3 Pulse MaskMeasurement
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
STS-1
DS3
DS1/E1
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
156MTSDS3
UNITUNDERTEST
DS3UNIT
UNDERTEST
Physical Layer Testing
The CERJAC 156MTS provides thefrequency measurement and theoptical power of a OC-12, OC-3 orOC-1 received signal or thefrequency measurement and thepeak electrical level of a STS-1,DS3, E1 or DS1 received signal.
21
Physical Layer Testingand Rear Panel
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
STS-1DS3DS1/E1
OC-12, OC-3, OC-1
156MTS
UNITUNDER
TEST
Slo Blo
115 V
5A 250V
200W
DS0 DS3ERR OUT STS1 TX
CLK IN
BURST ERR INTX CLK IN
ERR OUTBITS OUTDS1
DEMODJITTER OUT
VF IN
VF OUT
HAND SETDS1-INTERFACE
SIGNALING-TTL
DATA-LINK-RS422
DATA-LINK-RS232
TX CLK INBITS IN
PRINTER-RS232
REMOTE-IEEE-488
REMOTE-RS232
REF IN
Error burst trigger input
DS1/E1 TS Signal input/output
SONET orderwire
VF input/output
Jitter & ref/clock DS1 BITS input and outputError signal outputs
External clock inputs
Serial remote control
HP-IB remote control
DS0/E1 TS Signaling drop
Datalink drop/insert
Serial printer
Rear Panel
PC Software
22
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
CERJAC Test Set
Graph
Data
Store
PSTN
Launch Pad
All CERJAC 156MTS PC-basedsoftware tools are integrated withthe HP CERJAC Remote Testslaunch pad to enable lab and fieldpersonnel to quickly identify anddiagnose complex networkproblems. Using familiar “pointand click” commands, users canview, graph and store results.
Modem or Direct
Serial Connection
With the flexible communicationoptions, users can connect locallyvia a standard serial cable orremotely through a standardmodem or LAN. With a wideselection of standard modems anda user-defineable modem defini-tion, users can easily and rapidlyconfigure the PC setup to theirsystems’ hardware.
LAN Application
Using the LAN capability of theCERJAC Remote Test toolssoftware, multiple concurrentconnections can be established tocontrol multiple 156MTS unitslocated at distant locations.
E6347A Remote Front
Panel Software
The E6347A Remote Front PanelSoftware enables users to operatethe 156MTS as if they wereconducting hands-on testing.Using the “Pilot and Co-Pilot”capability, local and remote userscan simultaneously command andview the 156MTS. Since alarm,status and error LEDs are simu-lated on the Remote Front Panel,users can determine the state of atest at a glance.
23
LAN Application andRemote Front Panel Software
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
TERMINALSERVER
TERMINALSERVER
Los Angeles Miami
Chicago
NETWORK
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
NETWORKELEMENT
24
E6348A Remote Event
Logging Software
The E6348A Remote EventLogging automatically collectsdata in the background while atest is in progress. Test data canbe displayed in either “elapsedtime” or “time of day” format.Multiple error and alarm/statusscreens can be opened to time-correlate occurrences. The zoomfunction allows the user to “zoom-in” and focus on particular event,or “zoom-out” for the “bigpicture.”
E6322A Remote DS3 Pulse
Mask Graphical Software
The DS3 Pulse Mask companionsoftware enables users tographically compare data that hasbeen collected by the 156MTSequipped with option 202 (DS3pulse mask measurement).Graphical versions of the ANSIT1.102, ANSI T1.404, BellcoreTR499 or CCITT G.703 pulse masktemplates are available. Data canbe plotted, stored, printed andcompared to previously collectdata.
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
156MTS
156MTS
NETWORK
DS3UNIT
UNDERTEST
DS3
DS1/E1 STS-NVTDS3
RESULTS MEMORY
RESETHIST
AT
DS3 DS1/E1 STS-N
SONET MAINTENANCE TEST SET156MTS
Remote Event Logging andRemote DS3 Pulse Mask Software
25
Options and Accessories
Interchangeable Optical
Connectors
The CERJAC 156MTS can beequipped with interchangeablefront-panel optical connectors toenable users to rapidly changebetween FC/PC, ST, SC, D4-PCand other standard optical con-nectors. The interchangeablefront-panel connector adapterscan be rapidly removed for quickand easy cleaning of the optics.
Rear Panel Options
The CERJAC 156MTS can be equipped with number of options which can be located on the rear panelincluding a second laser, second DS3, multiple STS-1 & DS3 outputs, STS-12c error outputs and STS-12/3clock & data connections.
Second laser Second DS3 Multiple STS-1 and DS3 outputs
Accessories
Accessories for the CERJAC 156MTS include a soft carrying case, a hard case, a rack mounting kit and anexternal modem.
External ModemRack mount kitSoft and hard carrying case
26
Specifications
Frame Formats and MappingsSONET: STS-12/12c/3/3c/1, DS3 and VT1.5structured.VT1.5: async and byte sync.ATM: AAL0 and AAL1.DS3: M13, C-bit and unframed, DS1 andE1 structured.DS1/FT1: D4, ESF, SLC, MBLT andunframed.E1/FE1: TS0, TS0/16, TS0/CRC, TS0/16/CRC and unframed.DS0: 56/64Kbps pattern and tone.
Optical Test Interfaces• 622.08 Mbps (OC-12), 155.52 Mbps
(OC-3), 51.84 Mbps (OC-1).• 1310 and 1550nm intermediate and long
reach lasers available.• 2nd laser rear panel available.
Electrical Test InterfacesSTS-1/B3ZS tx and rx (51.84 Mbps):
STSX1, high, 900' (tx only), low (tx only),mon (rx only)STS-1/B3ZS drop: STSX1DS3/B3ZS: tx and rx (44.763 Mbps):
DSX3, high, low, 900' (tx only), mon (rxonly)DS3/B3ZS drop: DSX3E1/AMI/HDB3 tx and rx (2.048 Mbps):
DSX, mon (rx only)E1/AMI/HDB3 drop: DSX1DS1/AMI/B8ZS tx and rx (1.544Mbps):
DSX1 (rx only), DSX1 [0/-7.5/-15/-22 LBO](tx only), ALBO (rx only), mon (rx only)DS1/AMI/B8ZS drop: DSX1
Other Test Interfaces• Multiple STS-1/B3ZS/STSX1 and DS3/
B3ZS/DSX3 outputs (in groups of 3)• STS-12 and STS-3 ECL clock and data• STS-1/TTL Tx clock input• DS3/TTL and DS1/TTL error output• DS3/TTL Tx clock input• DS1/AMI/B8ZS/DSX1 Bits input and
output• DS1/AMI/B8ZS/DSX1 timing reference• DS1/E1/TTL Tx clock input• External TTL error input• Demodulated jitter output• VF 600ohm input and output• ABCD TTL output• RS-232: ESF-FDL, SLC96-DL, E1, E2, F1,
DS0, C-Bits• RS-442: D1-D3, D4-D12
Timing References• Internal Stratum 3, DS1 Bits, loop timing
and STS-1/TTL external
External Drop andInsert InterfacesSONET: STS-1, DS3, VT1.5/DS1, D1-D3,D4-D12, E1, E2, F1DS3: DS1 and E1, C-Bit datalinksDS1 and E1: V/F, DS0, ESF and SLC-96datalink
Payloads• STS-12c, STS-12c/ATM• STS-3c, STS-3c/ATM• STS-1/DS3, STS-1/VT1.5, STS-1/ATM• DS3, DS3/ATM-HEC, DS3/ATM-PLCP,
DS3/DS1, DS3/E1• E1, FE1, E1/TSO, E1/ATM• DS1, FT1, DS1/DS0, DS1/ATM
Global Payloads• FT1 and FE1• ATM
Physical Measurement• OC-12, OC-3 and OC-1 optical power
measurement• STS-1, DS3, E1 and DS1 peak electrical
measurement• OC-12, OC-3, OC-1, STS-1, DS3, E1, DS1
and DS0 frequency measurement• DS3 pulse mask to ANSI T1.102, ANSI
T1.404, TR-499, CCITT G.703• STS-1, DS3, E1 and DS1 jitter measure-
ment to CCITT G.823, TR-253 and TR-499
SONET Testing• STS-12c and STS-3c BERT testing• Alarm testing• Overhead testing• STS-1 pointer testing• VT1.5 pointer monitoring• Path trace testing• APS message testing to test form in
Bellcore GR-253.• DS3/DS1, DS3/E1 and VT1.5/DS1
tributary testing• BPV testing (STS-1 only)• OC-12/STS-3c, OC-12/DS3, OC-12/DS3-
DS1, OC-12/STS-1, OC-3/DS3, OC-3/STS-1, OC-3/DS3-DS1, OC-1 (STS-1)/DS3-DS1pass thru testing
• DS1 SONET sync status messagedecoding and encoding
T-Carrier Testing• DS3, E1 and DS1 BERT testing• DS3, E1 and DS1 alarm testing• DS3, E1 and DS1 BPV testing• DS3 overhead testing• DS3 FEAC testing• DS3/DS1 and DS3/E1 mux testing• Dual DS3/DS1/E1 testing• DS1 in-band and out-of-band loopcode
testing• DS1 CDI testing• FT1/FE1 testing• 56/64kbps DS0 testing• DS3/DS1, DS3/E1, DS1/DS0, E1/TS0 pass
thru testing• DS3 pulsemask measurement• DS3, E1 and DS1 jitter measurement
ATM Testing• STS-12c, STS-3c, STS-1, DS3 (HEC and
PLCP), DS1 and E1 payloads• VPI/VCI scan• Cell bandwidth monitoring and control• CBR and VBR traffic generation on 1
foreground and up to 4 backgroundchannels
• HEC testing• Cross-cell BERT using standard PRBS
patterns• Cell mis-insertion testing• OAM status and alarm testing• Cell inter-arrival time testing• Cell transfer delay time testing• Cell capture
User Interface• RS-232 remote front panel• RS-232 and IEEE-488 SCPI controllable• RS-232 printer• RS-232 field downloadable software
upgrades• 10 internal results buffers• 10 configuration storage buffers
GeneralPhysical: (WxHxD) 14.5x7.5x16.0 in(36.8x19.0x40.6 cm)Electrical: 100-220Vac 50/60HzPower: <500WEnvironmental: Operating 0 to +45°C(+32 to +113°F)Storage: -20 to +70°C (-4 to +158°F)
Ordering Informationand Sample Configurations
27
Ordering Information
HP E4480A: CERJAC 156MTS SONETMaintenance Test Set providing STS-1testing
Other Base Configurationsopt 001: removes STS-1 testing and addsDS3 testingopt 002: removes STS-1 testing and addsDS1/DS0 testing
Front Panel Optical Interfacesopt UQK: OC-12/3/3c/1 testing with1310nm IR opticsopt UQL: OC-12/3/3c/1 testing with1310nm LR opticsopt UQM: OC-12/3/3c/1 testing with1550nm LR opticsopt 311: OC-12/3/3c/1 testing with1550nm IR opticsopt UQG: OC-3/3c/1 testing with 1310nmIR opticsopt UQH: OC-3/3c/1 testing with 1310nmLR opticsopt UQJ: OC-3/3c/1 testing with 1550nmLR opticsopt 310: OC-3/3c/1 testing with 1550nmIR optics
Front Panel InterchangeableOptical Interfacesopt 300: Interchangeable opticalconnector baseopt 301: 2x FC/PC adaptersopt 302: 2x ST adaptersopt 303: 2x D4 adaptersopt 304: 2x SC adapters
2nd Laser Options(rear panel mounting)
opt 206: 1550nm IR rear panel laseropt 207: 1310nm IR rear panel laseropt 208: 1310nm LR rear panel laseropt 209: 1550nm LR rear panel laser
Fixed OpticalConnector Optionsopt UHV: Fixed ST optical connectorsopt UHW: Fixed FC/PC optical connec-torsopt UHX: Fixed D4-PC optical connectors
SONET Testingopt 203: STS-12c & STS-12c/ATM testingopt UQA: VT1.5 testing
ATM Testing(upto 155Mbps)
opt URZ: Advanced ATM testing
Sample Configurations
Sample 1SONETATMT-carrierOC-12/12c/3/3c/1, STS-1, DS3, VT1.5, DS1,E1 and DS01310nm and 1550nmDS3 pulsemaskFractional T1/E1Remote front panel s/w
Order: E6347A and E4480A with options:UQK, 206, 203, UQA, URZ, URR, 202, URS,US0, URQ, 201, H15, UQP, UQQ and UQR.
Sample 2SONETT-carrierOC-12/12c/3/3c/1, STS-1 and DS31310nm
Order: E4480A with options: UQK, URRand 203.
Sample 3T-carrierDS3 and DS1Fractional T1
Order: E4480A with options: 001, URS andUS0.
DS3 Testingopt URR: DS3 testingopt UQZ: 2nd DS3 testingopt 0YJ: 2nd DS3 Rx testing (Tx pass thruonly)opt 202: DS3 pulsemask measurement
DS1/E1 Testingopt URS: DS1/DS0 testingopt URQ: E1/TS0 testingopt US0: FT1 testing
Jitter Testingopt 201: Base jitter measurementopt H15: STS-1 jitter filteropt UQP: DS3 jitter filteropt UQQ: DS1 jitter filteropt UQR: E1 jitter filter
Multiple Outputsopt UR0: Set of 3 rear panel DS3 outputsopt URX: Set of 3 rear panel STS-1outputs
Electrical Connector Optionsopt UQ1: Bantam connectors for E1 andDS1opt UQ2: BNC connectors for STS-1 andDS3opt UQ4: WECO 358 connectors for STS-1and DS3
SONET Electrical TestInterfacesopt 204: STS-12c error outputopt 205: STS-12 ECL SMA RxData,TxData and TxClockopt US2: STS-3 ECL BNC RxData, TxDataand TxClock
Accessoriesopt 1CF: Soft carrying caseopt UK7: Hard carrying caseopt AXA: 19" rack mount kitopt AXB: 23" rack mount kitopt UHS: External modem
Software*E6322A: DS3 Pulse Mask GraphicsoftwareE6347A: Remote Front Panel softwareE6348A: Remote Event Logging software
*NOTE: for PC computers equipped with
Windows 3.11, Windows NT3.51 or
Windows 95 (Windows is a trademark of
Microsoft Corporation)
Related Products
© Hewlett-Packard Company, 1998
Printed in the U.S.A. (1/98)Data Subject to Change5966-2243E
For more information, call your local HPsales office listed in your telephonedirectory or an HP regional office listedbelow for the location of your nearestsales office.
United States:
Hewlett-Packard CompanyTest and Measurement Organization9780 South Meridian Blvd.Englewood, CO 801551-800-452-4844
Canada:
Hewlett-Packard Canada Ltd.5150 Spectrum WayMississauga, OntarioL4W 5G1(416) 206-4725
Europe:
Hewlett-Packard Nederland B.V.European Market CentrePostbox 6671180 AR AmstelveenThe Netherlands(31/20) 547-6669
Japan:
Hewlett-Packard Japan Ltd.Measurement Assistance Center9-1, Takakura-Cho, Hachioji-Shi,Tokyo 192, Japan(81/426) 48-0722
Latin America:
Hewlett-PackardLatin America Region Headquarters5200 Blue Lagoon Drive9th FloorMiami, FL 33126U.S.A.(305) 267 4245/4220
Australia/New Zealand:
Hewlett-Packard Australia Ltd.31-41 Joseph StreetBlackburn, Victoria 3130AustraliaMelbourne Caller 272 2555(008) 13 1347
Asia Pacific:
Hewlett-Packard Asia Pacific Ltd.17-21/F Shell Tower, Time Square,1 Matherson Street, Causeway Bay,Hong Kong(852) 599 7070
For countries not listed, contact:
Hewlett-PackardInternational Sales EuropeGeneva, SwitzerlandTel: +41-22-780-4111Fax: +41-22-780-4770
Hewlett-Packard offers a complete range of telecom-munications test equipment for SONET, ATM andT-Carrier networks, ranging from handheld networktesters to full-featured protocol analyzers. For moreinformation on the products listed below, please call1-800 9-CERJAC (1-800-923-7522) toll-free or any ofthe HP regional offices listed on this page.
Windows® is a U.S. trademark of Microsoft Corporation.
H
HP E4487A CERJAC Series 31XE
The HP E4487A CERJAC Series 31XEis a complete SONET, ATM and T-carrier Electrical test set for testing upto 51.84 Mbps. The test set canaccommodate a wide range of optionalfeatures include STS-1, DS3, DS1, E1and DS0 interfaces for Central Office,field, manufacturing and R&Dapplications.
HP E6325A T1 Test Advisor
The HP E6325A T1 Test Advisor is acomprehensive dual channel T1 tester.The test set can accommodate a widerange of optional interface modulesincluding V/F, RS-232, V.35, RS-449 andEIA-530 for stand-alone locationsrequiring low cost long-term monitor-ing via modem or it can combined witha PC for cost effect comprehensive T1testing.
HP J2301B Internet Advisor
The HP J2301B Internet Advisor is acomprehensive protocol analyzer. Thetest set provides a wide range ofoptional WAN, LAN and ATMinterfaces for expert troubleshooting,reconfiguring, optimizing andexpanding enterprise networks.
Hewlett-Packard
Service Test Division
2 Robbins RoadWestford, Massachusetts 01886-4113
Tel: 978/266-3300Fax: 978/266-3350
Technical Support
800-9CERJAC (800-923-7522)Certificate No. 6969