1

Adobe Sound Booth Tutorial

Recording your Voice in the Studio

1. Open Adobe Sound Booth

2. Click File>New>Empty Audio File

3. Hit the Record Button (red circle button at the bottom of the screen)

4. In the record window make sure that the Sample rate is 48000 and it is set to

stereo. Also make sure you click the box by Monitor Input during Recording.

5. Set your levels (Push the Mic pot up on the board, Turn down the speaker,

talk directly into the microphone **less that 1 inch away**). Make sure the

level meter on the record screen is is approaching the top but not turning red.

6. Change the file name and then hit browse. Go to Computer and select your

classes folder in the Media Storage drive

7. Hit the record button (the red circle) and read your script.

8. Press the stop button (white square) when you are done. The file will appear

in your file window in the upper left of the screen.

9. To check out the recording, turn the microphone pot off and turn up the

computer out pot and the monitor volume. To play the recording hit the space

bar.

10. If you don’t like the take, just repeat the process.

2

11. Back in the computer lab, copy the wav file(s) you created into your folder on

the lab computer. (Go to Network … … Select the Audio Production

computer… Go into the the class folder… Click on your wav files… Click

copy file… Paste them in your folder on the lab computer.)

Importing Music into a Project

1. To import production music click on Computer>Network .

2. Click on AudioProd.

3. Click on ProdMusic or SFX.

4. Select the file you want and right click.

5. Select copy.

6. Go to Computer and find your file folder under RTV on the Media Storage

drive.

7. Right click and select paste.

8. Now go into Soundbooth.

9. Click on the Import file icon or go to File>Import>Files

10. Navigate to your folder, select the file you copied and click open.

11. Click on the audio file that now appears on your list.

12. This opens the waveform in the right.

13. This process should be repeated to load all the files you will need for your

edit into the file window (including your voice that was recorded in the

studio).

3

Editing Single Audio Tracks

1. From the file window, double click on the audio file you want to edit.

2. To preview your audio file you can hit the spacebar to stop and start

playback or you can hit the play button on the bottom left controls.

3. You can also zoom in to make cleaner edits using the zoom tool.

4. Click and drag to highlight the portion of waveform you want to zoom in

on and release. That section of the waveform will fill the screen.

5. To look at the whole waveform again. Hit the Zoom Out Full button

4

6. Simple Deleting Audio: To delete a portion of the audio is very simple.

Choose the time selection tool.

7. Place the cursor on a point in the waveform, click and drag to highlight the

section you want to delete.

8. Then hit the delete button.

9. Simple Cutting, Copying and Pasting: Highlight the audio, right click

and select either Cut or Copy.

10. Place the cursor on the spot you wish to put this section of audio.

11. Right Click and select Paste .

12. Equalizing the Audio: This process needs to be done to your vocal

recording to make sure the levels are even.

13. Make sure you have the whole waveform showing on the screen (Click the

Zoom Out Full button). Double click anywhere on the wave form. This

will highlight the whole waveform.

14. Click on the Tasks tab.

5

15. In that window, click on the Volume Correction tab and then click on

Equalize Volume tab.

16. Then click on the Equalize Volume Levels. This will make all of the

volume the same throughout the waveform.

17. This should not be done to music since the volume should vary during

songs but your voice should be constant.

18. If you have multiple voice track you may consider Equalizing one and

using the Match Volume tab for the other files. (Come talk to me if you

wish to use that function).

Editing Multiple Tracks of Audio

1. Once you have done your simple editing, now it is time to mix the tracks

together. In your files window, there should be a file called Untitiled

Multi-track. Double click on that file.

6

2. This will open up a multi-track editing window on the right side of the

screen.

3. Click and drag each file into its own track.

4. Now save the Multi-track document (the overall work you have done).

Click File>Save. And give the file a name for the project itself and save it

into your project folder.

5. Make sure you save often.

6. Moving an Audio Track: Put the cursor on the track, when you see this

symbol you can click and move the track to any position on

the timeline.

7. Modifying a Track in the Multi-track document: There are three major

modification you will need to do to a track; length, volume and fading.

8. Changing the track length: Click on a track to select it. (The track you

have selected will be brighter than the other tracks).

9. Put your cursor on the start/end of the track and you will see this icon.

7

10. Click and drag that point to where you want the track to start/end.

11. Changing the track volume: Each track has a control area.

12. There is a number readout.

13. Click and hold on that number.

14. Moving the cursor left will decrease the volume while moving right will

increase the volume.

15. There is also a dial next to the number. You can move that to increase or

decrease volume as well.

8

16. Fading the track in/out: At the beginning and ending of each track these

is a button that controls fading.

.

17. To fade in, click on the button and move it to the point in the waveform

where you want the audio to be at full volume.

18. Repeat this at the end of the waveform and now the audio will fade in/out.

9

Exporting and Finishing an Audio Project 1. Save the multi-track document one more time.

2. Click File>Export>Multitrack Mixdown

3. Type in a logical file name & make sure that mp3 is selected in the Save

as type drop down.

4. Click Save.

5. Make sure it is set to 128 Kbps and stereo in the options window and click

save.

6. The file will load into your project automatically

7. Compressing the Audio to a Certain Length: This can be useful when

you are trying to make something to exact time (for example: a 30 second

radio spot that your recording is 31)

8. Double click and highlight the whole waveform.

9. Click on the Tasks tab and then the Pitch and Timing tab.

10. Click on Pitch and Timing button to open up the controls.

11. Make sure Preserve Speech Characteristics is checked.

12. Click on New Duration and type in the length you want. (for example: if

the spot is 00:00:28:52 to make it exact you would type in 00:00:30.00).

13. Click Preview to make sure it sounds correct.

14. Click Ok.

15. Click File>Save As

16. Now type the final name for the file you created (this will be the audio

project you turn in) and Click Save.