8/13/2019 Adaptare Cheie Contact VAG

1/2

Diagnostic Software for European Automobiles 881 Sumneytown Pike, Lansdale PA 19446, USA Order Info F.A.Q. Download/Update Manual Upgrades Literature Search: Go

Home Products

VAG-COMSupport

Car Info & Procedures Key Matching with 4-digit SKC

Key Matching with 4-digit SKCUpdated 19 Oct. 2009

Ross-Tech is not responsible for any damage or problems that may result from following these instructions. They are tobe used at your own risk.

This procedure details how to match new keys to Immobilizer-equipped VW/Audi vehicles. As of 11 Mar.2002, VW and Audi are providing 7-digit Secret Key Codes in place of the earlier 4-digit SKC's. Keys mustbe coded using the new 7-digit SKC (secret key code) method unless the owner still has the correct 4-digitcode.

VW/Audi used to give out the SKC to vehicle owners but as of 2005 they no longer do. Unless youalready have that information, then you will not be able to use these instructions - you will likelyneed to have your dealer perform this procedure.

Important Note: Unless you ALREADY have the SKC information for your vehicle and componentsthen you will NOT be able to do any of the Immobilizer functions. Click this link for more information.

Procedure for matching keys to vehicles with Immobilizer in the Instrument Cluster: (includes many 1999+ Golf/GTI/Jetta/New Beetle/Passat, also Audi)

1. [Select][17 - Instruments] [Login - 11] Enter zero followed by the 4-digit SKC.For example, if your SKC is 1234, enter 01234. [Do It!]

2. [Adaptation - 10] Enter 21 in "Channel Number"[Read]The "Stored Value" is the number of keys currently matched.Enter "new value" of 0[Test] [Save]This clears out the old key-matchings. Enter a "new value" corresponding to the total number of keys to be matched, including any existingkeys[Test] [Save]

3. [Done, Go Back] [Close Controller, Go Back - 06]

Printat de Ing. Han Cristian Data15/12/2010 Pagina 1din2

8/13/2019 Adaptare Cheie Contact VAG

2/2

Switch ignition off and remove key

4. Insert next key to ignition and switch ignition on againThe warning light for the Immobilizer will light up for ~2 seconds, then go outSwitch ignition off and remove key

5. Repeat step 4 with each key until all keys have been matched.

Procedure for adding keys to vehicles with separate Immobilizer: (Includes 2000+ EuroVan, Cabrio, and many older non-US models)

1. [Select][25 - Immobilizer] [Login - 11] Enter zero followed by the 4-digit SKC.For example, if your SKC is 1234, enter 01234. [Do It!]

2. [Adaptation - 10] Enter 01 in "Channel Number"[Read] The "Stored Value" is the number of keys currently matched.Enter "new value" of 0[Test] [Save]This clears out the old key-matchings. Enter a "new value" corresponding to the total number of keys to be matched, including any existingkeys[Test]

[Save]

3. [Done, Go Back][Close Controller, Go Back - 06] Switch ignition off and remove key

4. Insert next key to ignition and switch ignition on againCount to two ("One one-thousand, two one-thousand") out loudSwitch ignition off and remove key

5. Repeat step 4 with each key until all keys have been matched.

Home Products

VAG-COMSupport

Car Info & Procedures Key Matching with 4-digit SKC

Printat de Ing. Han Cristian Data15/12/2010 Pagina 2din2