actutator technology - made in germany
TRANSCRIPT
AVAMO is a brand name of NTF Korfhage Maschinenbau GmbH. We are offering individual solutions for actuators and controls desi-gned for a variety of industrial applications.
Among the diverse industrial applications of AVAMO-Products are the oil and natural gas industry, the chemical and petro chemical industry and the power generating industry.
We offer competent and expert solutions based on decades of ex-perience in the production of actuators. Our experience, accompa-nied with advanced manufacturing technology and state of the art machines, results in the highest standard of production which enab-les us to offer, and provide, our widely diversified range of services.
• Scotch yoke actuators
• Rack & pinion actuators
• Linear actuators
• Control systems
2
We offer tailor made solutions for your projects!
Actutator technology - Made in Germany
The AVAMO Scotch Yoke Actuators were developed for both opening/closing or modulating operations. The design accommo-dates modular assembly and provides lasting durability with minimal service requirements.
Feat
ures
Design: Symetric or canted scotch yoke lever
Control pressure actuator:
Pneumatic up to 12 barHydraulic up to 210 barNatural gas up to 200 bar
Torque: Up to 600.000 Nm
Temperatur range: -30°C to +110°C-40°C to +160°C-60°C to +160°C
Body: Maintenance free, corrosion protected, welded or cast iron construction
Cylinder: Cylinder with nickel plated running surfaces against corrosion providing a long lifetime for gaskets
Versions: Single or double acting
End stops: Adjustable leak free end stops +/- 5°
Available options: Manual emergency overrideActuating time <0,5 SecondsSour gas service
Certification: • ATEX 94/9/EG• PED 2014/68/EU• TR-TS Approval• Applicable up to SIL 3 as per IEC 61508• Machine directives 2006/42/EG
3
Scotch Yoke Actuators
AVAMO Rack & Pinion Actuators were developed for both opening/closing functions or modulating operations. The design accommo-dates modular assembly and provides lasting durability with minimal service requirements.
Design: Double-piston rack & pinion design
Control pressure actuator:
Pneumatic up to 12 barHydraulic up to 210 barNatural gas up to 200 bar
Torque: Up to 10.000 Nm
Temperatur range: -30°C to +110°C-40°C to +160°C-60°C to +160°C
Body: Maintenance free, corrosion protected construction
Versions: Single or double acting
End stops: Adjustable leak free end stops +/- 5°
Available options: Manual emergency overrideActuating time <0,5 Seconds
Certification: • ATEX 94/9/EG• PED 2014/68/EU• TR-TS Approval• Applicable up to SIL 3 as per IEC 61508• Machine directives 2006/42/EG
Feat
ures
4
Rack & Pinion Actuators
AVAMO Linear Actuators were developed for both Opening/Closing functions or modulating operations. The design accommodates modular assembly and provides lasting durability with minimal ser-vice requirements.
Design: Piston type
Control pressure actuator:
Pneumatic up to 12 barHydraulic up to 210 barNatural gas up to 200 bar
Thrust: Up to 5.500.000 N
Temperatur range: -30°C to +110°C-40°C to +110°C-60°C to +160°C
Cylinder: Cylinder with nickel plated running surfaces against corrosion providing a long lifetime for gaskets
Versions: Single or double acting
Available options: Manual emergency overrideActuating time <0,5 SecondsAdjustable leak free end stops
Certification: • ATEX 94/9/EG• PED 2014/68/EU• TR-TS Approval• Applicable up to SIL 3 as per IEC 61508• Machine directives 2006/42/EG• TRD 421
Feat
ures
5
Linear Actuators
In addition to the actuators AVAMO offers a wide variety of control units tailored to meet the customer’s specific needs. They are cha-racterized by their high quality standards’ and ease of maintenance.
We offer you:
• Pneumatic controls
• Gas controls
• Electrohydraulic controls
• Gas over oil controls
• Wellhead controls
• Solar systems
• Line break systems
• High- und low-pilots
• Steam test device
6
Gas control
Electrohydraulic controlPneumatic control
Control Units
Consistent quality control is crucial in our branch. This is why our entire manufacturing process is constantly being monitored by our employees using state of the art measuring devices. All products are subjected to 100 percent control.
• DIN ISO 9001:2015
• ATEX Zone 1
• up to SIL 3
• CU-TR 012/2011
• Pressure equipment directives 2014/68/EU
• Machinery Directive
7
Contact us at: [email protected]
Quality
Our Service
Our experienced service technicians are available for a diverse variety of services worldwide:
• 24 hour standby
• On site installation and commissioning
• Spare parts management
• Servicing / Service contracts
• On-site training
• In house training in our own training center.
Nordring 1549328 Melle-BuerGermany
+49 (0)5427 9406 50
+49 (0)5427 9406 66
www.avamo.eu
AVAMO is a brand of NTF Korfhage Maschinenbau GmbH