acs endurawood introduction min
TRANSCRIPT
ACS EnduraWoodArchitectural Ceiling Systems www.acsceilings.com.au
Timber finishes that are more enduring, fire resistant and maintenance free
ACS EnduraWood Linear 5 Linear 5 provides decorative and functional acoustic ceilings through it’s open linear aesthetic. Linear 5 is available in lengths up to 6.5m and can be used as a curved or raked ceiling providing more design opportunity. It’s low profile, wide panel creates an effective timber slat effect that can be perforated or left plain whilst providing minimum 0.70 NRC features. 19 different timber species are available for selection.
<Linear 5 Ironbark Linear 5 Jarrah ^
ACS EnduraWood ICE Metal pan These tiles are available in sizes of 1200 x 600, 1200 x 400,
1200 x 300 & 600 x 600mm with our Levelo edge detail.
Our Setback edge is available as a 600 x 600 module & our
flexible Plafond Bespoke systems can be provided in your
nominated preferred sizes (over 5000 options are available).
These panels can be supplied in our 3.5mm perforation
providing NRC 0.70 and plain. Bespoke perforations and slots
are also available. The use of EnduraWood ICE Metal pan
provides an acoustic light weight, timber finish system that is
lightweight, decorative and easy to maintain and clean.
< ACS EnduraWood finishes shown are Bush Cherry,
Snow Gum, American Oak & Tasmanian Oak ^
ACS EnduraWood Forms Forms provides decorative and functional acoustic
ceilings. Forms 23mm depth & close alignment provides an affordable screening option whilst
creating an effective timber batten effect that can be perforated or left plain whilst providing minimum
0.70 NRC features. Forms is a versatile ceiling lining that provides more design opportunity. 19
different timber species are available for selection.
< ACS EnduraWood Casuarina ^ Tasmanian Oak
ACS EnduraWood Cladding systems
Deckform & Profile 230Our ACS Deckform & Profile 230 systems provide 2 different types of
concealed fixed, maintenance free cladding systems that become more
effective when the durable and attractive EnduraWood finishes are
applied. With EnduraWood external cladding you will be comforted that a
12 year warranty is provided. This makes EnduraWood the most
durable & appealing timber grain powder coat available in Australia.
Deckform – provides for continuous flush, monolithic surfaces with a
secure 150mm wide tongue & groove panel.
Profile 230 – is a low profile 12mm deep ribbed system that creates a
shadow line detail with 230mm coverage. Both of these ACS systems
can be orientated in any direction and are available in lengths up to
6500mm allowing for elongation of your facades, walls & soffits.
< Profile 230 ^ Deckform both in EnduraWood Western Red Cedar
ACS EnduraWood Timber Species Selection, 19 now available
EnduraWood combines the natural warmth and beauty of timber with the strength and enduring properties of Zincalume Steel and Aluminium.
The EnduraWood powder coat is
50% more durable and robust
than standard powder coats.
EnduraWood is provided with a 12 year powder coat Warranty that complies with AS3715.
Natural timber has variation. The EnduraWood
Timber finishes shown are approximate only.
To choose from our full range of 19 Timber
species & system samples. Please contact ACS
on the details provided on the next page.
Architectural Ceiling Systems EnduraWood www.acsceilings.com.au e) [email protected]
p) 08 9271 0777 – Made in Australia, Short Lead times
Please contact us to find out more or to connect with your local ACS stockist.