ACRITHERM PRIMERCOLORED WALL PRIMER WITH HIGH COVERAGE AND PENETRATION Compliant with the directive 2004/42/CE

DESCRIPTIONColored primer with high coverage based on special acrylic micro emulsions in water dispersion with high penetration anchorage and reinforcement on the preparation of the ground, specific for water paints and coatings IR reflective, for water paints and mineral and synthetic coatings on interiors and exteriors. The small dimensions of the binders particles, give to the product an excellent penetration on the substrate, allowing the reduction of the absorption of the water and uniforming on this way the absorption of the surfaces treated.

COLOR Colorless, white and color chart.

PACKAGINGLt. 5 – 10 - 20 Plastic containers.

COMPOSITIONBased on special acrylic micro emulsions in water dispersion, inorganic pigments and earth pigments inalterable over time and specific additives.

USEOn old and new walls, weak and inconsistent or not uniform on the absorption as preparation of the ground for the following application of water paints or mineral and synthetic coatings.

PHISICAL FEATURES

Specific weight ± 5% UNI EN ISO 2811-1 1,05 Kg/lt Consistency Liquid fluid Min. temp. for the film formation +5°CLimit value UE of the content of VOC (2010) ≤30 gr/ltContent of VOC ≤30 gr/ltClassification DIRECTIVE 2004/42/CE H/BA

APPLICATIONPrepare the surfaces, both old and new, taking care that are perfectly dried and clean, removing all the crumbling and inconsistent parts, and dusts mud, bitumen, oil stains, etc.Brush carefully any old paint not adherent to the surface.Be sure that the surfaces are free of saline efflorescences and stains of active humidity.On holes and cracks apply “MALVISTUK” paste stucco or “MICRORAS SB” powder stucco for interiors or “INTORAS M or MC” powder stucco for exteriors.Then apply a coat of “PREVIT COL” to uniform the absorption diluted 1:2 with clean water depending on the absorption of the substrates.Don’t apply on frozen surfaces, with frost or possible frost in 24 hours. Don’t apply in very sunny days.Don’t apply with strong wind and/or driving rain.Don’t apply until when the surface hasn’t completely dried.We suggest to apply ACRITHERM PRIMER with a temperature between + 5 ° C and+ 30 ° C.Waiting time between coats 6/12 hours.

•

•••

•

••••••

Linea acrilica termoriflettente

Pro

dott

o Conforme alla Norma Europea

MALVIN

2004/42/CE

H/BA

MALVIN

LOW EMISSION VOC

Eco sostenibilità

MALVIN

EC

The performance characteristics refer to laboratory tests, values depend on the weather conditions and on the method of implementation. The user must verify that the product is suitable for the intended application.

SEDE LEGALE E STABILIMENTO • Zona ASI - SS 7 Bis Km 15,400 - 81030 Gricignano di Aversa (CE)TEL. + 39 081 8132780 - 5029713 • FAX + 39 081 5029748 • commerciale@malvinsrl.com - www.malvinsrl.comNumero Verde

800 - 142 999

DILUTION1:2 with clean water.

YIELD8/10 mq/lt for each coat of product diluted, depending on the absorption of the surface.

COMPATIBILITYWith every product based on resins in water dispersion.

USEWith a brush or a roller or by spray.

SUMMARYInternal and external walls will be prepared to receive water paints and mineral and synthetic coatings IR reflective with a primer based on special acrylic micro emulsions in water dispersion with an high penetration anchorage and reinforcement, type “ACRITHERM PRIMER” by MALVIN S.r.l., applied with a brush or a roller or by spray and to dilute 1:2 with clean water, with a yield of 8/10 mq/lt for each coat of product diluted depending on the absorption of the surface.

ACRITHERM PRIMER

CERTIFICATO N° EDIL 2016_003