acr 3413 basic structural engineering 3 lecture 6 · pdf filelecture 6 u pm universiti putra...
TRANSCRIPT
8
Tolerance and movement require consideration.
The vertical inter-storey deflection is normally limited to 10mm so that a joint of 15mm cansafely be adopted;
The vertical along-storey slope is normally limited to span/1000 for the efficient function of thegaskets;
The horizontal inter-storey slope is normally limited to span/500 for the efficient function of thegaskets;
27
Transfer Floor Scheme, Conventional RC Transfer
Beam to Post-Tensioned Transfer Plate.
Introduction of
PT Plate:-
• Improve
constructability.
• Reduction of
formwork.
• Saving of time
by allowing fit-
out to start
earlier.
• Reduction in
overall weight.