acoustic combo - tanglewood guitars ?? · acoustic combo combo acoustique / combo acústico / combo...

Download ACOUSTIC COMBO - Tanglewood Guitars ?? · ACOUSTIC COMBO Combo acoustique / Combo acústico / Combo per chitarra acustica / Akustik-Combo Owner’s Manual Manuel d'utilisateur

Post on 01-Feb-2018

229 views

Category:

Documents

14 download

Embed Size (px)

TRANSCRIPT

  • ACOUSTIC COMBOCombo acoustique / Combo acstico / Combo per chitarra acustica / Akustik-Combo

    Owners ManualManuel d'utilisateur / Manual de instrucciones / Manuale d'uso / Bedienungsanleitung

    www.tanglewoodguitars.co.uk

  • 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or othe apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarize plug has two blades with one wider than the other.A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for you safety.If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particlarly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. Minimum distance of 20 cm around the apparatus for sufficient ventilations.16. Do not install this equipment in a confined space such as a book case or similar unit The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc.17. WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.18. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,such as vases,shall not be placed on apparatus.19. This apparatus shall be connected to a mains socket outlet with a protective earthing connection.

    The Lightning Flash with arrowhead symbol within an equilateral triangle,is intended to alert the user to the presence of uninsulated dangerous voltage within the product enclosure that may be ofsufficient magnitude to constitute a risk of shock to persons

    The exclamation point within an equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance (servicing) instructions in the literature accompanying the product.

    IMPORTANT SAFETY INSTRUCTIONS

    GB

  • SPECIFICATIONS

    EFFECT DESCRIPTION & CONTROL

    SPECIFICATIONSMODEL T6POWER OUTPUT (RMS) 60wSPEAKER/IMPEDANCE 8/4 ohmIMPEDANCE INPUT CH1: 470K

    CH2: LINE-22K / MIC-600KBUILT-IN EFFECTS Hall, Plate, Chorus, DelayINPUT JACK (6.35mm) CH 1 Input, CH 2 Input (6.35mm+XLR),

    AUX IN(RCA), MP3 IN(3.5mm), TUNER OUTSEND/RETURN, DI OUT (XLR), LINE OUT, PHONES OUT, FOOTSWITCH,

    INDICATOR Power LED, Indicator for CH1/CH2 OverdrivePOWER SUPPLY AC 100v/50-60Hz, 110v/60Hz, 220v/50Hz,

    230v/50Hz, 240v/50HzNET WEIGHT 11kgGROSS WEIGHT 12.5kgDIMENSIONS 346 x 280 x 346mmPACKING SIZE 430 x 370 x 420mmACCESSORIES Owners Manual, Power CordSPEAKER SOCKET 35mm Recessed Speaker Pole Socket

    MODE

    1 2 3

    4

    1.HALL2.PLATE3.CHORUS4.DELAY

    1. Built-in digital effect modules including Hall, Plate Chorus & Delay

    2. The effect is applied on CH1 & CH2 when the button is in the "ON" position. The effect is not applied to CH 2 when the button is in the "OFF" position.

    "ON" Button Down"OFF" Button Up

  • FRONT PANEL DESCRIPTION

    CH1 ACOUSTIC

    1. INPUT: Input jack for acoustic guitar (6.35mm)2. HIGH/LOW: Input select control for acoustic guitar. Select "HIGH" when connecting guitar of low output.3. CLIP: CH1 indicator for overdrive of pre-amp signal.4. CONTOUR: Brightness control, increasing brightness of acoustic guitar.5. CONTOUR INDICATOR.6. GAIN: CH1 gain control. When indicator of Clip overdrive is on, turn down the GAIN to prevent distortion.7. BASS: Boost/cut +/- 10dB of low frequency.8. MIDDLE: Boost/cut +/- 10dB of middle frequency.9. TREBLE: Boost/cut +/- 10dB of high frequency.

    CH2 MIC

    10. INPUT: Input jack for MIC (6.35mm)11. LINE/MIC: Select button for LINE/MIC input.12. CLIP: CH2 indicator for overdrive of pre-amp signal.13. GAIN: CH2 gain control. When indicator of Clip overdrive is on, turn down the GAIN to prevent distortion.14. BASS: Boost/cut +/- 10dB of low frequency.15. TREBLE: Boost/cut +/- 10dB of high frequency.

    EFFECT CH

    16. EFF.PAN: Assign effect level to a specific channel.17. MODE: Effect select control (Hall, Plate, Chorus, Delay).18. LEVEL: Effect level output control.19. MASTER: Master volume control.20. POWER INDICATOR.

    INPUTGAIN BASS MIDDLE TREBLE

    INPUT BALANCED

    GAIN BASS TREBLEEFF.PAN MODE LEVEL

    MASTER

    LOW

    HIGHCLIP

    CONTOUR

    MIC

    LINECLIP

    POWER

    CHI ACOUSTIC CH2 LINE/MIC

    CH2 CH1

    1 2 3

    4

    EFFECTS1.HALL2.PLATE3.CHORUS4.DELAY

    32 5

    8

    104

    1 6 7 9

    11 12

    13 14 15

    16

    17 18 19

    20

  • BACK PANEL DESCRIPTION

    21. AUX IN: Auxiliary input jack Stereo/RCA. Connect external sources like CD.22. MP3: MP3 input jack 3.5mm.23. TUNER: Connect tuner 6.35mm.24. SEND: Sender of external effect loop 6.35mm.25. RETURN: Return of external effect loop 6.35mm.26. DI-OUT: Balanced output of pre-amp. Connect mixer XLR.27. LINE OUT: Signal output 6.35mm.28. PHONES: Headphone output jack 6.35mm. Warning: Before using headphones, make sure the volume is low. Inserting or removing the headphones in high volume will make noise that may cause harm to ears.29. FOOTSWITCH: Footswitch control jack, for connecting FS-1, and controlling effect channel.30. POWER: Power switch. Power should be off when you are not using the amplifier. Please turn off the power before removing the plug. Make sure the master volume is on minimum before turning on/off power.28. AC INPUT: AC input jack. Use the plug conforming to local voltage. Please refer to rear panel label or users manual for suitable AC input.

    AMPLIFIER UNDERSIDEThe T6 is fitted with a universal 35mm Recessed Speaker Pole Socket to fit anyindustry standard tripod speaker stand. Please ensure any speaker stand chosento use with the T6 is rated to safely accommodate over 13kg in weight value.

    FOOTSWITCH PHONES LINE OUT

    DI OUT

    RETURN SEND TUNER

    AUX INBALANCED EFF.LOOP

    C A U T I O NRISK OF ELECTRIC SHOCK DO NOT OPEN

    TO REDUCE THE RISK OF ELECTRIC SHOCK ,

    DO NOT REMOVE COVER (OR BACK).

    NO USER-SERVICEABLE PARTS INSIDE.

    REFER SERVICING TO QUALIFIED

    SERVICE PERSONNEL.

    POWER

    AC INPUT

    POWER SUPPLY:

    FUSE: T 1.0A 250V

    OUTPUT(RMS): 60W

    MODEL: T6

    MP3

    2123242526272829 22

    31 30

    SERIAL NO:

    Tanglewood Guitar Company UK

    PIN ASSIGNMENT FOR XLR CONNECTOR 1. GND

    3. COLD2. HOT

  • 1. Lisez attentivement ces instructions.2. Conservez ces instructions.3. Respectez tous les avertissements.4. Suivez toutes les instructions.5. Ne pas utiliser cet appareil prs de l'eau.6. Nettoyez le uniquement avec un chiffon sec.7. Ne pas bloquer les ouvertures de ventilation. Installer conformment aux instructions du fabricant.8. Ne pas l'installer prs de sources de chaleur telles que radiateurs, registres de chaleur, des poles ou autres appareils (y compris les amplis) produisant de la chaleur.9. Ne supprimez pas le dispositif de scurit de la fiche polarise ou mise la terre. Une fiche polarise possde deux lames dont l'une est plus large que l'autre. Une prise de terre possde deux lames et une broche de terre. La lame large ou la troisime broche sont fournies pour votre scurit. Si la fiche fournie ne rentre pas dans votre prise, consultez un lectricien pour remplacer la prise obsolte.10. Vrifiez que le cordon d'alimentation ne soit pas coinc o que quelqu'un ne marche pas dessus, particulirement au niveau des fiches, des prises et au point o ils sortent de l'appareil.11. N'utilisez que des accessoires spcifis par le fabricant.12. Utilisez uniquement un stand, un trpied, une console ou table spcifis par le fabricant, ou vendu avec l'appareil. Quand un stand est utilis, soyez prudent lorsque vous dplacez l'ensemble afin d'viter les risques de renversement.13. Dbranchez cet appareil pendant les orages ou inutilis pendant de longues priodes de.14. Confiez toutes les rparations un personnel qualifi. Une rparation est ncessaire lorsque l'appareil a t endommag de quelque faon que ce soit au niveau du cordon d'alimentation ou si la fiche est endommag, ou si du liquide a t renvers ou des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit, ne fonctionne pas normalement, ou a t abandonn.15. La distance minimale est de 20 cm autour de l'appareil pour une ventilation suffisante.16. Ne pas installer cet quip