acknowledgements we would like to thank the bec laboratory people who helped us with measurements on...
TRANSCRIPT
AcknowledgementsWe would like to thank the BEC laboratory people who helped us with measurements on the real system
A special thanks to our instructor in the Advanced DSP Lab, Mr. Alon Slapak who helped us find this algorithm and implement it.
ConclusionThe FxLMS algorithm for noise cancellation is suitable for reducing the laser frequency output noise thus enhancing its stability and quality.
For more information on:
FxLMS Noise cancelling algorithm, Blackfin DSP implementation and more ideas for future projects.
Contact:
AFEKA Tel-Aviv Collage of EngineeringMoskovitch Moran & Fishelzon David052-2725075 052-8735585Email:
[email protected]@Yahoo.com
Web: Laser4Bec.Blogspot.comThe Ficus Tree Advanced DSP Lab Web site : http://highlearn.afeka.ac.il/users/www/9357/index.html
AimThe aim of the project is a feasibility test for using the FxLMS algorithm as a control algorithm of the LASER output frequency.
Since surrounding noises cause vibrations of the LASER mechanical structure, which changes the output frequency, a compensation controller is used to reduce the error signal noise. The FxLMS algorithm is used as the control algorithm.
IntroductionPhysics of quantum systems and the development of matter-wave quantum technology is at the peak of modern research.
In the Bose-Einstein Condensate (BEC) lab at the Weizmann Institute of Science, rubidium atoms are brought to the
Bose-Einstein condensate (BEC) state.
This state predicted by Satyendra N. Bose and Albert Einstein in the 1920’s enables the study of phenomena that occur at a very small scale.
To reach this new state, the atoms are brought to a very cold temperature of 170 nano Kelvin.
Cooling the atoms is achieved by pointing a very accurate LASER from beam from all six directions to the center.
Hot atoms are moving, thus having their absorption line frequency shifted by the Doppler effect. This shift makes the hot atoms move in the opposite direction –resulting in them stopping – hence cooling.
MethodTo achieve the high accuracy needed, a commercial
LASER diode is used together with an external cavity. This external cavity is made using a diffraction grating and a piezoelectric actuator. The grating is a mirror that returns part of the beam back to the commercial laser’s internal cavity from a few centimetres distance, resulting in a very high accuracy laser beam.
The problem is that this scheme is sensitive to acoustic noise. Surrounding noise vibrates the mechanical structure holding the cavity components, thus causing the length of the cavity to change, generating changes in the output laser beam frequency.
AlgorithmA very fast DSP-based controller, enables real time
compensation for the acoustic interference by changing the external cavity length. The DSP changes the voltage applied to the piezoelectric actuator according to the FxLMS adaptive filter algorithm.
implementation
ResultsMeasurements of the transfer function of the system and the transfer function of the noise reviled a very close to the theory picture :
Measured in reality Expected from theory
The simulated system output :
Output Noise Input Noise
Future workThis project is a feasibility proof of the implementation of the FxLMS algorithm as a noise reduction controller for an accurate laser output frequency.
Future work could implement this DSP algorithm in a real world system but, in our opinion, a faster DSP is needed. Also faster analog to digital and digital to analog converters than the ones we used on the EZ-KIT demonstration board are required.
A faster DSP could also enable the use of sophisticated pattern recognition algorithms to enable automatic finding and locking on the desired absorption line of the laser’s output frequency detector.
DSP Based Controller for
Very Accurate LASER
Moskovich Moran & Fishelzon David [email protected] [email protected]
The FxLMS algorithm worked well and achieved significant Noise reduction.The mean square error of the output signal was reduced by the DSP running the control algorithm
The controller’s job is to pick up the acoustic noise and compensate for this noise by changing the piezoelectric actuator's voltage. The S’(z) system is used to enable convergence of the adaptive filter despite the non-minimal phase system of the piezo.
LASERLASER
External CavityExternal Cavity Beam SplitterBeam Splitter
Rubidium CellRubidium Cell
DetectorDetector
PumpPumpProbeProbe
LMSS’(z)
S(z)
P(z)
en
dn
y’n
x’n
ynxn
NOISE
W(z)
Block diagram of the DSP based controller.The microphone that is located near the cavity, is receiving the acoustic noise, and the DSP is compensating for this noise, in real time.
DF FIR
SYSTEM1
DF FIR
SYSTEM
Noise1DF FIR
NOISE
x
u
e
y
W
LMSe
u d
y
Lock Signal
Piezo Out
FxLMS – Filtered X LMS
BLACK
fin
OUT (J4) IN (J5)
LEFT (White)
RIGHT (Red)
System In3
NOISE
1
2
3
4
1
2
34
Noise In4
- Xn Input
LEFT (White)
RIGHT (Red)
Simulation - Output
e ner
ror
in
Yn - Output
1
2
3
4
12
34
SimulatedSystem
Controller
Piezo Out
GratingGratingPiezoPiezo LASERLASER