Auburn Product Overview

3000 Series Products

TRIBO.dsp Products

TRIBO.dsp Product Line

Auburn provides a comprehensive product offering in the TRIBO.dsp line

• U3200 – Broken Bag Detector

• U3300 – RS-485 Multi-point Monitor

• U3400 – Two-wire 4-20mA Dust Monitor

• U3600 – Advanced Particulate Monitor

• U3800 – Multichannel Monitor/System

Auburn.vision software for data management

TRIBO.dsp Monitoring Features

• Reliable, Repeatable, Robust signal

o Immune to harsh industrial environment and noise

• No Drift Circuitry

o Eliminates need for zero or span checks

• Probe Fouling Check

o Self diagnoses if probe needs cleaning due to build-up

• Widest dynamic range

o All units can be used for flow or emissions monitoring

All 3000 series products have the TRIBO.dsp Features

TRIBO.dsp U3200

Economical Broken Bag

Detector/ Flow Detector

TRIBO.dsp U3200

• Bag Leak/Broken Bag Detector

• Flow/No Flow Detector

• 120/230 VAC power or 24 VDC power

• (2) SPDT Relay Contacts for Alarms

• Visual Digital Display of Signal

This is the most advanced, most reliable detector on the market.

U3200 Applications

• Indicate filter breaks in dust collectors, bin vents, filter receivers, etc..

• Indication of flow, with alarms for low or high flow, or no flow conditions

• For applications where recording signals is not required or desired

TRIBO.dsp U3300

TRIBO.dsp U3300

• Bag Leak/Broken Bag Detector

• Flow/No Flow Detector

• 24 VDC power via RS-485 cable

• Integral or Remote Styles

• Modbus RTU Protocol, for PLC Connection

Simple installation, no local display, hands off monitor designed to be connected to PLC

U3300 Typical Configuration

U3300 Applications

• Multiple uses – bag leak, emissions and flow applications

• 24VDC Power, Modbus-RTU, for PLC input

• No display, no maintenance – ideal for hands off

customer

• Economic solution for multiple point monitoring

TRIBO.dsp U3400

TRIBO.dsp U3400

• Bag Leak/Broken Bag Detector

• Flow/No Flow Detector

• Two-Wire 24 VDC Loop Power

• Integral or Remote Styles

• 4-20 mA output, for PLC Connection

Simple installation, no local display, hands off monitor designed to be connected to PLC

TRIBO.dsp U3400 HART

• Same 4-20 mA output, for PLC Connection

• HART Protocol• Allows remote communication with unit

• Provides additional information along with 4-20 mA output

• CSA Hazardous Ratings• Class I, Division 1, Groups C,D T4

• Class II, Division 1, Group E,F,G T4

• Class III

• Also equivalent Class I, Zone 0, Group IIB

U3400 Applications

• Multiple uses – bag leak, emissions and flow applications

• 24V loop power, 4-20 mA output, for PLC input

• No display, no maintenance – ideal for hands off

customer

• Economic solution for multiple point monitoring

TRIBO.dsp U3600

TRIBO.dsp U3600

• Easy to Read Local Display/Control Panel

• Standard Outputs:

• (2) SPDT relay contacts

• 4-20 mA signal

• Optional Digital Output (Ethernet/IP, Modbus TCP)

• (2) Correlation Factors for readout in mg/m3 (only used when stack tests are performed)

• Probe Fouling Alarm

U3600 Applications

• For more complex Emission or Flow applications

• For Customers who needs more controls/local display, local alarms

• Ideal for stand alone applications – no PLC

• Digital output for PLC or Network connection – can be added in future – plug in module

• Correlation to mg/m3 for CEM applications

Thank you.

Auburn Systems, LLC8 Electronics Ave.

Danvers, MA 01923

978-777-2460

www.auburnsys.com