accuseal pressure relief valves asv10-20-brochure-rev10_5
DESCRIPTION
Brochure on sizing Pressure relief valvesTRANSCRIPT
Houston, Texas • Longview, Texas(281) 977-8500 • (903) 247-0006(281) 260-8366 • (903) 759-3475
[email protected] • www.accusealvalves.com
SERIES ASV10 & SERIES ASV20SAFETY RELIEF VALVESTHREADED, FLANGED, CUSTOM
VALUE THROUGH PERFORMANCE!
ACCUSEALS A F E T Y VA LV E S
®
2
ACCUSEAL SAFETY VALVES
OPERATION & FEATURES
ASV10/20 TECHNICAL DATAConstruction:
Inlet Sizes:
Outlet Size:
Connections:
Orifice Sizes:
Certifications:
Service Pressure Range:
Temperature Range:
Blowdown:
Seals:
Services:
Capacities:
Springs:
Simple, minimal parts and sealsSame configuration – gas or liquid service
1/2” to 2” Standard
1” & 2” Minimum, Standard
Threaded and Flanged
D & E, F & G interchangeable
NBBI, gas/vapor, liquid;Canadian Registered
15 – 2164 psig
-60o F to 550o F
Fixed
Standard sizes(3), easily replaceable
Standard, NACE, Stainless Steel, Special
High KA values
Meet ASME Code, UG-136(a)(2)
To Accuseal, Value means:• Reliable Product Performance
• Responsive Customer Support
• Competitive Pricing
• On-time Deliveries
The Series ASV10 & ASV20 safety relief valves provide an economical solution for your pressure reliefapplications. They are ideal for a variety of gas/vapor and liquid services, including pipelines,separators, compressors, coolant circulation systems, as well as many unique OEM applications.
These are direct spring operated valves with a fixed blowdown. They utilize a soft seat to ensurebubble-tight seating. Pressure acting on the seat area overcomes the spring pre-load and opens thevalve at the set pressure.
The spring, assisted by dome pressure, reliably closes the valve once the system pressure drops belowthe reseat pressure.
ASV10’s and ASV20’s open with minimal overpressure to assure protection of your personnel, yoursystems, and your investment.
Array offers value through reliable performance of products in service as well as from qualified,professional personnel supporting the product before and after delivery.
ACCUSEAL products meet the requirements of the ASME Boiler and Pressure Vessel Code Sec. VIII,Div. 1 for Air, Gas, and Liquid. Capacity ratings were established by testing performed at the NationalBoard of Boiler and Pressure Vessel Inspectors, Columbus, Ohio.
Accuseal safety relief valvesmeet the requirement of theNational Board.
• Excellent Quality
A
C
B
A
C
B
3
SERIES ASV10 DIMENSIONS & WEIGHTS
SERIES ASV20 DIMENSIONS & WEIGHTS
Seat ConfigurationMetal-to-Metal Seat iniates closure, = ~Cl. II leakage.Soft Seat creates bubble-tight seal.
THREADED - STANDARD:INLET OUTLET PRESSURE RANGE ORIFICE A B C WEIGHT2
MNPT FNPT (psig) SIZE1,3 (inches) (inches) (inches) (lbs)1/2” 1” 15 - 887 D, E 3.25 1.95 11.31 7.5
1/2” 1” 888 - 1480 D, E 3.25 1.95 12.31 8.1
3/4” 1” 15 - 887 D, E 3.25 1.95 11.31 7.5
3/4” 1” 888 - 2164 D, E 3.25 1.95 12.31 8.1
1” 1” 15 - 887 D, E 3.25 1.95 11.31 7.6
1” 1” 888 - 2164 D, E 3.25 1.95 12.31 8.2
FLOW CAPACITIES:For capacities in various fluids see the separate publication “ACCUSEAL Capacity Tables.”
THREADED - STANDARD:INLET OUTLET PRESSURE RANGE ORIFICE A B C WEIGHT2
MNPT FNPT (psig) SIZE1,3 (inches) (inches) (inches) (lbs)1-1/2” 2” 15 - 681 F, G 4.33 2.25 10.50 30
1-1/2” 2” 682 - 2000 F, G 4.33 2.25 12.50 33
2” 2” 15 - 681 F, G 4.33 2.25 10.50 30
2” 2” 682 - 2000 F, G 4.33 2.25 12.50 34
1. F = .675” Diameter; A = .357 in2
G = .790” Diameter; A = .490 in2
2. Estimated
1. D = .410” Diameter; A = .132 in2
E = .560” Diameter; A = .246 in2
2. Estimated3. D = Gas/Vapor Only E = Gas/Vapor/Liquid
C
A
B
A
B
Seat ConfigurationMetal-to-Metal Seat iniates closure, = ~Cl. II leakage.Soft Seat creates bubble-tight seal.
Soft Seat (Quad-Seal)Seat Body
Seat CarrierRetainer
Metal-to-Metal Seat
Orifice Diameter
3. F = Gas/Vapor Only G = Gas/Vapor/Liquid
Spindle StemSpindleMetal-to-Metal
Orifice Diameter
Seat Guide
Soft Seat (Quad-Seal)
Seat Insert
4
SERIES ASV10/20 DIMENSIONS
ASV20 FLANGED - STANDARD
ASV10 FLANGED - STANDARDINLET OUTLET PRESSURE RANGE ORIFICE A B CANSI# ANSI# (psig) SIZE (inches) (inches) (inches)
1/2” 150# 1” 150# 15 - 285 D, E1 3.35 3.50 11.34
1/2” 300# 1” 150# 286 - 740 D, E1 3.60 3.50 11.59
1/2” 600# 1” 150# 740 - 887 D, E1 3.85 3.50 11.84
1/2” 600# 1” 150# 888 - 1480 D, E1 3.85 3.50 12.84
1/2” 600# 1” 300# 888 - 1480 D, E1 3.85 3.75 12.84
3/4” 150# 1” 150# 15 - 285 D, E 3.35 3.50 11.34
3/4” 300# 1” 150# 286 - 740 D, E 3.72 3.50 11.72
3/4” 600# 1” 150# 740 - 887 D, E 3.97 3.50 11.97
3/4” 600# 1” 150# 888 - 1480 D, E 3.97 3.50 12.97
3/4” 600# 1” 300# 888 - 1480 D, E 3.97 3.75 12.97
3/4” 900# 1” 300# 1481 - 2164 D, E 4.35 3.75 13.35
1” 150# 1” 150# 15 - 285 D, E 3.28 3.50 11.28
1” 300# 1” 150# 286 - 740 D, E 3.66 3.50 11.65
1” 600# 1” 150# 740 - 887 D, E 3.91 3.50 11.90
1” 600# 1” 150# 888 - 1480 D, E 3.91 3.50 12.90
1” 600# 1” 300# 888 - 1480 D, E 3.91 3.75 12.90
1” 900# 1” 300# 1481 - 2164 D, E 4.47 3.75 13.46
1. Gas/Vapor Only
INLET OUTLET PRESSURE RANGE ORIFICE A B CANSI# ANSI# (psig) SIZE1 (inches) (inches) (inches)
1-1/2" 150# 2" 150# 15 - 285 F, G 4.52 4.06 10.65
1-1/2" 300# 2" 150# 286 - 740 F, G 4.84 4.06 10.96
1-1/2" 600# 2" 150# 740 - 1480 F, G 5.15 4.06 11.27
1-1/2" 600# 2" 300# 740 - 1480 F, G 5.15 4.31 11.27
1-1/2" 900# 2" 300# 1481 - 2000 F, G 5.64 4.31 11.77
2" 150# 2" 150# 15 - 285 F, G 4.63 4.06 10.77
2" 300# 2" 150# 286 - 740 F, G 4.94 4.06 11.08
2" 600# 2" 150# 741 - 1480 F, G 5.32 4.06 11.46
2" 600# 2" 300# 741 - 1480 F, G 5.32 4.31 11.46
2" 900# 2" 300# 1481 - 2000 F, G 6.13 4.31 12.27
5
SERIES ASV10/20 ACCESSORIES
INLET PORTA 1/4” NPT inlet port can be provided on theInlet sub to install instrumentation like apressure gage, or apply pressure below theseat to test the valve, in combination with afull-bore block valve upstream.
SPECIAL CONNECTIONSAND MATERIALS
Array offers special inlet and outlet connections, other than as shown on page 4,to your exact specifications, as well as specialty alloys and elastomers to meetyour special service conditions.
SPRING CARTRIDGESSpring Cartridges, which include the Spring and therequired Spring Bearings, are provided to change setpressures. Springs meet Code requirements.
OTHER ACCESSORIESArray can also provide peripheral equipment to complete your relief valve installation, including gaskets, bolting, discharge piping, and vent caps.
For details, discuss the above options further with an Array sales specialist at 1-281-977-8500.
LIFT LEVER ASSEMBLY
A lift lever assembly is available for all sizes to test theoperation of the valve assembly. By turning the outerhandle, the inner rod is lifted which in turn picks upthe bottom of the spring, relieves the spring preload,and allows the inner piston to open. By ASME Code,lift levers are mandatory for applications in air, orwater above 140o F. For all other applications, thisfeature is optional.
22
11
6
SERIES ASV10 MATERIALS OF CONSTRUCTION
SERIES ASV20 MATERIALS OF CONSTRUCTION
SERVICEITEM DESCRIPTION STANDARD NACE STAINLESS STEEL
1 Cap Carbon Steel Carbon Steel/Stainless Steel Stainless Steel 2 Body WCB WCB/CF8M CF8M3 Adj Shaft Carbon Steel Stainless Steel Stainless Steel 4 Spring Bearing Carbon Steel Stainless Steel Stainless Steel 5 Shaft Stainless Steel Stainless Steel Stainless Steel 6 Head Stainless Steel Stainless Steel Stainless Steel 7 Seat Carrier Stainless Steel Stainless Steel Stainless Steel 8 Seat Retainer Stainless Steel Stainless Steel Stainless Steel 9 Seat Body Stainless Steel Stainless Steel Stainless Steel
10 Cage Stainless Steel Stainless Steel Stainless Steel 11 Inlet Sub Carbon Steel Carbon Steel/Stainless Steel Stainless Steel 12 Spring Stainless Steel Inconel Stainless Steel 13 Retainer Screw Stainless Steel Stainless Steel Stainless Steel14 Lock Wire Stainless Steel Stainless Steel Stainless Steel
daeL daeL daeL laeS daeL 5116 Nameplate Stainless Steel Stainless Steel Stainless Steel17 Drive Pins Stainless Steel Stainless Steel Stainless Steel18 O-Ring Elastomer Elastomer Elastomer19 O-Ring Elastomer Elastomer Elastomer20 Quad Ring Elastomer Elastomer Elastomer21 Lock Nut Carbon Steel Stainless Steel Stainless Steel22 Pipe Plug(Optional) Stainless Steel Stainless Steel Stainless Steel
SERVICEITEM DESCRIPTION STANDARD NACE STAINLESS STEEL
1 Cap Carbon Steel Carbon Steel/Stainless Steel Stainless Steel2 Body, 1.0” WCB WCB/CF8M CF8M3 Adj Shaft Carbon Steel Stainless Steel Stainless Steel4 Lock Nut Carbon Steel Stainless Steel Stainless Steel5 Spindle Stem Stainless Steel Stainless Steel Stainless Steel6 Spring Guide Stainless Steel Stainless Steel Stainless Steel7 Spring Stainless Steel Inconel Stainless Steel8 Spindle Stainless Steel Stainless Steel Stainless Steel9 Seat Guide Stainless Steel Stainless Steel Stainless Steel
10 Seat Insert Stainless Steel Stainless Steel Stainless Steel11 Inlet Sub Carbon Steel Stainless Steel Stainless Steel 12 Quad Ring Elastomer Elastomer Elastomer13 O-Ring Elastomer Elastomer Elastomer14 O-Ring Elastomer Elastomer Elastomer15 Lock wire Stainless Steel Stainless Steel Stainless Steel
daeLdaeLdaeLlaeS daeL6117 Nameplate Stainless Steel Stainless Steel Stainless Steel18 Drive Pins Stainless Steel Stainless Steel Stainless Steel19 Spindle Lock Nut Stainless Steel Stainless Steel Stainless Steel20 O-Ring Elastomer Elastomer Elastomer
11
16
5
6
717
8
18
10
20
1
3
19
2
4
12
9
13
4
17
20
6
18
7
19
8
9
10
13
14
11
2
12
5
1415
1516
21
7
SERIES ASV10/20
Accuseal safety relief valves meet the requirement of the National Board.
PRODUCT NOMENCLATURE CODEA 10 E 4 1 N 0 A - 1440
ACCUSEAL SERIES ORIFICE INLET/OUTLET CONNECTION SEAT TYPE MATERIAL CODE VARIATION SET PRESSURE
A 10 D 2 1/2 x 1 1 M X F N Nitrile 0 CS Standard A Standard 0050E 3 3/4 X 1 2 150 X 150 V Viton 1 CS Low Temperature B Inlet Port 0150
4 1 X 1 3 300 X 150 K Kalrex 2 CS Nace C Lift Lever 1440PTDCDecaN erutarepmeT woL SC3003 X 0034
/ 2X2115F02 dradnatS SS4051 X 00652 X 26G ecaN SS5003 X 0066
7 600 X 600
METALS TYPE DEGREES F DEGREES C ELASTOMERS DEGREES F DEGREES CCarbon Steel A108 -20 to 500 -29 to +260 Viton -15 to +450 -23 to +232
WCB -20 to 500 -29 to +260 Nitrile -65 to +250 -48 to +121LCC -50 to 500 -46 to +260 EPDM -65 to +325 -48 to +163
Stainless Steel 304/316 -423 to 650 -253 to +343 Neoprene -35 tp +225 -37 to +10717-7 -423 to 650 -253 to +343 Kalrez 0 to +500 -18 to +260
CF8M -423 to 650 -253 to +343 Chemraz -22 to +500 -30 to +260Inconel X750 -423 to 750 -253 to +399 Aflas +25 to +450 -4 to +232Elgiloy -423 to 750 -253 to +399
MATERIAL TEMPERATURE LIMITS - TYPICAL
X* DESCRIPTION BODY SPRING0 CS Standard WCB Stainless Steel1 CS Low Temperature LCC Stainless Steel2 CS Nace WCB Inconel3 CS Low Temperature Nace LCC Inconel4 SS Standard CF8M Stainless Steel5 SS Nace CF8M Inconel
METALLIC MATERIAL CODE:
7 2 X 38 1500 x 3009 1500 x 300
1500 x 6001500 x 15002500 x 3002500 x 6002500 x 15002500 x 2500
S Special
AC
AflasChemraz
101112131415S Special
E EPDM6 CS with SS Trim & SS Spring
E SS Inlet
ASV 10 Series Orifice 1 x1 Thread with Nitrial Standard Trim with Inlet Port
Example:
CS with SS Trim LCC/WCB Stainless Steel6
2X15
VALUE THROUGH PERFORMANCE!
ACCUSEALS A F E T Y VA LV E S
®
All specifications and materials are subject to change without notice. • 11/2012 • Printed in U.S.A.
LIMITED PRODUCT WARRANTY
The following warranty is exclusive and in lieu of all other warranties. Whether express, implied or statutory, including,but not by way of limitation, any warranty of merchantability or fitness for any particular purpose.
Array Holdings warrants to each original buyer of products manufactured by Array that such products are free fromdefects in material and workmanship under normal use and service for a period of two (2) years from the date ofshipment provided that no warranty is made with respect to: Any product which has been repaired or altered in such away in Array’s judgment, as to affect the product adversely; Any product which has, in Array’s judgment, been subjectto negligence, accident or improper storage; Any product which has not been operated or maintained in accordance withnormal practice and in conformity with recommendations and public specification of Array; valve without nameplate,missing or removed.
Array Holdings’ obligation under this Warranty is limited to use reasonable efforts to repair, replace or, at it’s option,refunding the purchase price. The cost of labor for installing a repair or replacement product shall be borne byPurchaser. Replacement parts provided under the terms of this Warranty are warranted for the remainder of thewarranty period of the products upon which they are installed to the same extent as if such parts were originalcomponents thereof. Warranty services provided there under do not assume any liability for damages caused by anydelays involving warranty service. For complete specification information, prices and name, address and telephonenumber of the Array representative nearest you, call or write to us at the address below.
15900 Morales Rd.Houston, Texas 77032Phone: (281) 977-8500 Fax: (281) 260-8366
[email protected] • www.accusealvalves.com
506 West Harrison RoadLongview, Texas 75604Phone: (903) 247-0006Fax: (903) 759-3475