® ACCESSORIES - ----------------------------------

FITIINGS

SWIVEL COUPLER

Swivel Coupler can fasten tubes of up to 48.3mm outer diameter. It has the wide wing nuts for fastening the clamp to a tube at any ang le.

DROP FORGED

WEIGHT

STANDARD

PRESSED STEEL

SLEEVE COUPLER

1.16 KG

Zinc Plated

EN 74

1.04 KG

Gold Passivated

EN 74

A coupler des igned with wrapping feature for end to end connection of any scaffold tube to form a butt joint connection.

PRESSED STEEL

1.03 KG

Gold Passivated

EN 74

----------------- ------------------ ACCESSORI ES ®

FITTINGS

DOUBLE COUPLER

Easier t o handle when connecting standard to standa rd or ledger to ledger and any tube having an out side diameter of 48.3mm at right angle or 90° .

DROP FORGED

WEIGHT

FINISH

STANDARD

PRESSED STEEL

WEIGHT

FINISH

STANDARD

JOINT PIN

1.21 KG

Zinc Plated

EN 74

0.91 KG

Gold Passivated

EN 74

A fitting designed with utili t ies as t he sleeve coupler except t hat it is connect ed internally.

PRESSED STEEL

WEIGHT 0.88 KG

FINISH Gold Passivated

STANDARD EN 74

® ACCESSORIES -----------------------------------

FITTINGS

BEAM CLAMP/GRAVELOCK/GIRDER COUPLER

Designed to connect scaffold tube to beam or girder flange up to 45mm wh ile exceeding BS 1139 slip requirements. A pair of girder couplers must always be used.

DROP FORGED

WEIGHT 1.47 KG

FINISH Zinc Plated

STANDARD EN 74

PUTLOG/SINGLE COUPLER (DROP FORGED)

Designed to join putlogs or transoms to ledger allowing scaffold board to be laid across on top the putlogs or transoms.

WEIGHT

FINISH

STANDARD

0 .75 KG ___ __,

Zinc Plated

EN 74

BOARD RETAINING COUPLER

Used to secure scaffold boards onto the ledger.

WEIGHT

FINISH

STANDARD

0 .63 KG

Zinc Plated

EN 74

----------------------------------- ACCESSORIES ®

FITTI NGS LADDER CLAMP

Safely and securely clamps a ladder to a scaffold t ube. Used in pairs, it ensures that ladder will not slip or lean . Available finishes in zinc coated with ye llow passivation.

STAIR TREAD BRACKET

A high quality, plated coupler that allows simple assembly of stair treads. The swive l nature of the coupler allows a wide range of ang les between the tube and the sta ir t read. Available fin ishes in zinc coated with yellow passivation.

TOE BOARD CLAMP

For fast and economica l retention of toe boards.

LIMPET CLAMP

Used to secure steel batten unto t he ledger.

® ACCESSORIES -----------------------------------

ACCESSORIES

SCAFFOLDER SPANNER

Scaffolder spanner 7 /16", is made specia lly for use on BS/En scaffold coup lers.

It is made from high quality chrome vanad ium steel and heat treated for durable longer li fe span.

SCAFFOLDER LEATHER BELT

Made of best quality leather for strength, durability and longer life span. With pouches for: Spirit level, spanner, measuring tape, ratchet

------------- ---------------------- ACCESSORIES ®

ACCESSORIES

SPIRIT LEVEL

Scaffold spirit level (magnetic) made of Aluminium, special ly designed to be used with all types of scaffold ing for easy and accurate level reading.

.,3"; o/ ~. ~

- A \IJ

LAMINATED BOARDS

Complies with OSHA(Occupational Safety and Health Administration) and AnSI Al0.8, Safety Requirements for Scaffolding-American National Standard for Construction and Demolition Operations.

® ACCESSORIES ----------------------------------ACCESSORIES SCAFFOLD BOARDS

Bark-free and heat treated in kiln, by temperature higher than 56 Celsius degrees and heating t ime longer t han 30 min. (Ht 56/30) .

STEEL BATTEN

Standard or Hook type avai lab le. Comes in different length.

SCAFFOLD TUBES

Black/Galvanized

--------------------------------- ACCESSORIES ® ACCESSORIES ALUMINUM LADDER

Complies with BS En 131.pt 1 & pt 2: 1993

STEEL LADDER

Material as per BS EN 39 :2001/ BS 7668:2004

LADDER BEAM

Mat eri al as per BS EN 39:2001 Painted or Galvanized comes in d ifferent length (Maximum 6.00m)

WOODEN POLE LADDER

Complies with B.S. 1129

® ACCESSORIES ------------------------------------

LIGHT AND MEDIUM DUTY PROPS

I­I (.9

tu I

---- BASE PLATE

-i- -1-

. .... __ _ INNER TUBE

• • • • •

PI N

= ==:!~!».... __ COLLAR

i ..,., ___ SLEEVE

-

1<11---- OUTER TUBE

I BASEPLATE

' 1'

DESCRIPTION

GSP- 1

GSP-2

GSP-3

GSP-4

GSP-5

MAXIMUM HEIGHT

(M)

2.50

3.00

3.50

4 .00

5.00

MINIMUM HEIGHT

(M)

1.50

1.75

2.00

2.50

3.50

WEIGHT (KG)

11.00

16.7

18.4

20.2

24.2

NOTES: 1. Weights given are based on 3 .20m m tube thickness . 2. Sizes and thickness are ava ilable in 2.00mm,

3.20mm and 4 .00mm .

SAFE WORKING LOAD FOR PROPS:

~ 30 ...... 0

<5 ....1 20 w ....I co

~ 10 ...... :IE C( w 0.. 0

1 2 3 4 5

PROP EXTENSION (M)

MAXIMUM PERMISSIBLE (AXIALLY LOADED/UNBRACED)

MATERIAL OF 3.25 MM THICK TUBE IS AS PER BS EN 39:2001

AND BS 7668:2004

'