about us products ethylene hdpe ldpe lldpe other...
TRANSCRIPT
0302
Polymerc GmbH, as the commercial arm of a prominent holding company owning different olefin and polyolefin plants, is one of the leading producers of polyethylene products known for its wide range of high quality products and professional expertise.
As one of the largest production centers for polyethylene products in the Middle East today, we mainly produce a wide range of High Density, Low Density and Linear Low Density polyethylene (HDPE, LDPE, and LLDPE) for use in different applications. We produce more than 2 million tonnes of ethylene to be processed as feedstock in our seven brand-new plants.
Located in Germany’s capital, Berlin, Polymerc surrounded by the historical train manufacturing facilities called Borsigwerke, founded in 1837. Even today, one can see and feel an enterprising spirit in this fruitful setting. From this strategic point, we enjoy the best transport connections, given the proximity to Berlin’s Airport Tegel.
Our warehouses are located in Antwerp and Hamburg, where we have an excellent connection not only to different European countries but also the whole world. Thanks to our efficient logistic partners, we guarantee a quick delivery of the goods to our customers.
Our knowledge and competence originates from our long experience which you can trust. Quality, reliability, innovation and flexibility are our core values to have a successful and close cooperation with our partners and customers.
Wherever we operate, we aim for highest level of performance and benefit for all parties, leading to sustainable relationship and reliability. Also, our close cooperation with our customers lead to constant realization of their expectations. Orienting our activities to serve our customers’ needs, we work hand in hand with them and persistently deliver outstanding results.
On the following pages, you will find information about our range of products. If you have any further questions about the products or you need samples, please do not hesitate to contact us. We will always be at your service.
About Us
175KT/Y
The Group owns the whole up and midstream polyethylene
production chain. Our olefin plant came into production in 2012
with a total capacity of 2 million tonnes per year. The plant feeds
not only our own HDPE, LDPE, and LLDPE plants, but also our
domestic customers. In addition to ethylene, we have around
178K tonnes of C3+ every year and heavier products which are
processed into propylene and other petrochemical feedstock.
Below you can see a Production Process Diagram and an
overview of the plants.
EthaneC3+
Ethylene
Butene-1
300KT/Y
2000KT/Y
178KT/Y
300KT/Y
550KT/Y
300KT/Y
30KT/Y
300KT/Y
30KT/Y
Olefin Unit
HDPE Unit HDPE
LDPE Unit LDPE
MEG
LLDPE Unit
MEG
LLDPE
0504
Ethylene
PRODUCTS
High-density polyethylene (HDPE) is a thermoplastic material composed of
carbon and hydrogen joined together forming high molecular weight products
and is defined by a density range of 0.941-0.965 g/cm3. Industrially, HDPE
is synthesized from ethylene by a catalytic procedure. HDPE products are
characterized by high tensile strength, good chemical resistance, coupled
with higher service temperature limits. HDPE is also more durable and opaque
and can tolerate higher temperatures mainly compared to LDPE.
HDPE is basically used to produce high-performance pipe, chemical
drums, general household, kitchenware and industrial bottles, oil bottles,
injection-molded food containers, cable insulation, carrier bags, tanks for
storing chemicals, food wrapping material, etc.
Employing two individual plants, the groups produces a wide range of HDPE
products with diverse applications leading to improve the quality of life. With
total capacity of 300 KT/Y, our first HDPE plant came into production in 2012.
Polymerc’s second HDPE plant will start to produce various grades of HDPE
with total production capacity of 175 KT/Y in early 2018.
In line with the production of these two plants, our two swing HDPE/LLDPE
plants also possess the capacity to produce some other HDPE grades. In the
next pages, detailed information of our LLDPE plants will be provided.
Detailed properties of our HDPE products will be provided as follows. If there is
any product you cannot find in our catalogue, please do not hesitate to contact
us. We are fully at your disposal.
0706
HDPE
BG-HD 7260 (I3)
BG-HD 7255 (I4)
BG-HD 7255 (I4S)
BG-HD 4750 (BL2)
BG-HD 4760 (BL3)
BG-HD 4765 (BL3VD)
BG-HD 8355 (BL4M)
BG-HD 8255 (BL4)
BG-HD 7745 (BL8)
BG-HD 7740F (EX1)
BG-HD 7740F2 (EX1A)
BG-HD 7750M (EX2)
BG-HD 7750M2 (EX2S)
BG-HD 9455F (EX4)
BG-HD 9455F1 (EX4HS)
BG-HD 9450F (EX5)
BG-HD 9450F1 (EX5HS)
BG-HD 9445HT (EX6HT)
BG-HD 4750K (BL2A & EX7C)
BG-HD CRP100 black (EX3S)
BG-HD 5010T2 black (EX3B2)
BG-HD 5010T3 black (EX3B3)
BG-HD GX4035 (EX)
Product Code Group Density (gr/cm3) MFI(190°c/5 kg)
Main Application
0.956±0.002
0.954±0.002
0.954±0.002
0.944±0.002
0.954±0.002
0.959±0.002
0.951±0.002
0.952±0.002
0.944±0.002
0.944±0.002
0.944±0.002
0.956±0.002
0.956±0.002
0.956±0.002
0.957±0.002
0.949±0.002
0.950±0.002
0.944±0.002
0.946±0.002
0.954±0.002
0.954±0.002
0.954±0.002
0.959±0.002
23±3
11±2
11±2
1.1±0.3
1.2±0.3
1.5±0.3
0.35±0.05
0.4±0.05
0.31±0.04
1.8±0.3
1.8±0.3
2.5±0.3
3.3±0.3
0.28±0.05
0.22±0.05
0.28±0.05
0.22±0.05
0.18±0.03
3.5±0.05
0.22±0.02
0.45±0.06
0.43±0.03
1.1±0.03
Injection Molding
Injection Molding
Injection Molding
Blow Molding
Blow Molding
Blow Molding
Blow Molding
Blow Molding
Blow Molding
Raffia, Extrusion
Raffia, Extrusion
Monofilament, Extrusion
Monofilament, Extrusion
Extrusion, Film
Extrusion, Film
Extrusion, Film
Extrusion, Film
Extrusion, Film
Extrusion
Extrusion, Pipe
Extrusion, Pipe
Extrusion, Pipe
Extrusion, Pipe
Transport, stack and bottle crates, bottle lids
Thick-wall transport containers, refuse bins, fish crates
Thick-wall transport containers, refuse bins, fish crates
Disinfectant bottles (max. 2 L), cosmetics tubes, containers (max. 10 L), petrol cans (max. 5 L)
Containers (from a few ml to max 10 L), thermoforming sheets
Bottles and canisters (max. 10 L)
Bottles and canisters (max. 10 L)
Large bottles and canisters (max. 200 L)
Heating oil and storage tanks, transport containers
Stretch films and tapes
Tape for production of agricultural packaging
Monofilaments with high tensile strength
Monofilaments for fishing knots, geotextiles and civil engineering
Blown films with paper like quality, counter and carrier bags, wrapping films
Blown films with paper like quality, counter and carrier bags, wrapping films
Blown films with paper like quality, counter and carrier bags, wrapping films
Blown films with paper like quality, counter and carrier bags, wrapping films
Blown films with paper like quality, counter and carrier bags, wrapping films
Cable and wire insulation
PE 100 pressure pipes for gas and water transportation, PE 80 thinner-wall pressure pipes
Pressure, drinking water, gas, waste, and sewer pipes, pipe fittings and sheets
High quality PE 80 pressure pipes for gas and water transportation
Steel pipe coating
HDPE
08 09
BG-HD 50B01(N)
BG-HD 50B01(M)
BG-HD 42BF5
BG-HD 48BF7
BG-HD 62N07
BG-HD 62N18
BG-HD 54B04
BG-HD 52B11
BG-HD 52B18
BG-HD 40B04
BG-HD 50B03
BG-HD 52HF2
BG-HD 60NF7
BG-HD 48HF8
BG-HD 48HF3
BG-HD 51HF5
BG-HD 48HF6
BG-HD 44HF6
BG-HD 48HF3
BG-HD 48HF3
BG-HD 52HF3
BG-HD 52BF3
BG-HD 50HF4
Product Code Group Density (gr/cm3) MFI(190°C/2.16kg)
Main Application
0.950±0.002
0.950±0.002
0.942±0.002
0.948±0.002
0.962±0.002
0.962±0.002
0.954±0.002
0.952±0.002
0.952±0.002
0.940±0.002
0.950±0.002
0.952±0.002
0.960±0.002
0.948±0.002
0.960±0.002
0.951±0.002
0.948±0.002
0.944±0.002
0.948±0.002
0.948±0.002
0.952±0.002
0.952±0.002
0.950±0.002
1±0.2
1±0.2
0.5±0.1
0.7±0.2
7±1
18 ±3
4±0.5
11±2
18±3
4±0.5
3.3±0.2
0.2±0.02
0.7±0.1
0.8±0.2
0.3±0.1
0.5±0.1
0.6±0.1
0.6±0.15
0.3±0.15
0.3±0.15
0.35±0.1
0.35±0.1
0.45±0.15
Raffia, Textile & Monofilament
Raffia, Textile & Monofilament
Raffia, Textile & Monofilament
Raffia, Textile & Monofilament
Injection Molding
Injection Molding
Injection Molding
Injection Molding
Injection Molding
Rotomolding
Injection Molding
Blow Molding
Blow Molding
Wire & Cable
Wire & Cable
Pipe
Pipe
Pipe
Pipe
Film
Film
Film
Blow Molding
Narrow MWD high tenacity monofilament with dual stretch
Medium MWD monofilament tapes with easy processing
Tapes, blown film process
Tapes, cast or water wuench process
Crates and boxes
Fast cycle
Caps, closures, pallets, boxes, crates
Housewares containers,
Housewares with high fluidity
General purpose grade
Blown films, thin bags with high stretch
Containers (max. 2 L), general purpose grade
Small containers (max. 0.5 L) with high stiffness
Wire and cable
Jacketing
Sewage and non-pressure pipes
Telecommunication cable pipes, sewage pipes
PE 80 pressure pipes
PE 100 pressure pipes
Blown films, thin bags with high stretch
General purpose blown films with high stiffness
General purpose films
Medium blow moulding, jerry-cans
HDPE
1110
MFI (190°C/5 kg)
Low-Density Polyethylene possessing a density
range of 0.918-0.940 g/cm3 has the most excessive
branching. LDPE is synthesized from ethylene in high
pressure procedure. Compared to HDPE, LDPE is
more flexible and transparent and cannot tolerate high
temperature. LDPE products are easily processed by
most methods and have good strength and clarity.
The major application of Low Density Polyethylene is
general purpose film, extrusion coating, milk packaging,
squeeze bottles, toys, carrier bags, high frequency
insulation, chemical tank linings, heavy duty sacks,
injection molding, wire and cables, gas and water pipes
and others. Flexible packaging constitutes major part of
LDPE consumption.
We are proud of our brand-new LDPE plant, which
came into production with one of the modernist
technology in 2017. The plant produces a wide
range of low density polyethylene products with total
capacity of 300 KT per year including pipe coating,
PE foam, injection and blow molding, insulation, etc.
Our LDPE products are trusted by our customers
worldwide to produce competitive products from
liquid packaging, shrink films and bags to electrical
cables and wire insulations. In the following, you can
find more about our LDPE products.
LDPE
1312
Product Code Group Density (gr/cm3) MFI(190°C/2.16kg)
Main Application
BG-LD 1840F3
BG-LD 2420F3
BG-LD 2420F8
BG-LD 2426F8
BG-LD 3020F9
BG-LD 3026F9
BG-LD 2420E02
BG-LD 2426E02
BG-LD 3020E02
BG-LD 3026E02
BG-LD 2426E04
BG-LD 3020E04
BG-LD 3026E04
BG-LD 2420E36
BG-LD 2220F3
BG-LD 2220F8
BG-LD 2220E02
0.920±0.002
0.923±0.002
0.923±0.002
0.924±0.002
0.927±0.002
0.927±0.002
0.923±0.002
0.924±0.002
0.927±0.002
0.927±0.002
0.924±0.002
0.927±0.002
0.927±0.002
0.924±0.002
0.920±0.002
0.920±0.002
0.920±0.002
0.3±0.05
0.3±0.05
0.8±0.1
0.8±0.1
0.9±0.1
0.9±0.1
1.9±0.2
1.9±0.2
2±0.2
2±0.2
4±0.2
4±0.2
4±0.2
36±2
0.3±0.05
0.8±0.1
2±0.2
Film
Film, Co-extrusion
Film
Film
Film
Film
Film
Film
Film, Blow Molding
Film
Film
Film
Film
Injection Molding
Film
Wire & Cable, Extrusion
Film, Extrusion
Heavy duty packaging, shrink hoods, agricultural films
Heavy duty packaging, shrink hoods, Inliners
Shopper bags, sanitary films, surface protection films
Freezer and laminating films, shopping bag
Collation shrink, fine shrink and high calrity films
Lamination films, hygiene and food packaging FFS films
General purpose blown & cast films, fine shrink and high clarity films
General purpose blown & cast films, freezer flims,
hygiene and food packaging FFS films
Blown & cast lamination films, sanitary, high clarity and
surface protection films
Hygiene and food packaging FFS films, blown & cats, overwrap
and high clarity films
High clarity and clothes protection film
Lamninating, high clarity, cast and cling films
High clarity thin gauge films, cast films
General purposes, lids, closures, thin-wall containers
Heavy duty blown films, shrinkage and silage films
Medium voltage cable insulation
Hygienic films, foam, cast films
1514
LDPE
Linear Low-Density Polyethylene is well-defined by a density
range of 0.916-0.940 g/cm3 and has a significant number of
short branches. This gives LLDPE higher tensile strength and
higher impact and puncture resistance than the LDPE.
Linear Low Density Polyethylene is mainly used for plastic
bags and sheets (where it exhibits higher impact and puncture
resistance than LDPE), plastic wrap, stretch wrap, pouches,
toys, covers, lids, pipes, buckets and containers, cables
covering, and mainly flexible tubing.
Producing Linear Low Density Polyethylene, the two plants
came into operation in 2015 and 2016. Production capacity
of these LLDPE plants is totally 600 KT per year and the
products range from film and monofilament grade to injection
and rotomolding.
Employing two individual plants leads to flexibility in supplying
a wide range of LLDPE products at the same time. Detailed
properties of our LLDPE products will be provided as follows.
LLDPE
1716
Product Code Group Density (gr/cm3) MFI(190°C/2.16kg)
Main Application
BG-LL 18B01
BG-LL 18B02
BG-LL 18B03
BG-LL 18H01
BG-LL 18H02
BG-LL 18H03
BG-LL 22B01
BG-LL 22B02
BG-LL 22B03
BG-LL 22B05
BG-LL 25B25
BG-LL 25B60
BG-LL 23B07
BG-LL 23B16
BG-LL 22BF7
BG-LL 18B03
BG-LL 34B05
BG-LL 37B05
BG-LL 30B05
BG-LL 32H05
BG-LL 31BF4
BG-LL 33B03
0.918±0.002
0.918±0.003
0.918±0.002
0.918±0.002
0.918±0.002
0.918±0.002
0.922±0.002
0.922±0.002
0.922±0.002
0.922±0.001
0.925±0.002
0.925±0.002
0.923±0.001
0.923±0.001
0.922±0.002
0.918±0.002
0.934±0.002
0.937±0.001
0.930±0.002
0.932±0.001
0.931±0.002
0.933±0.001
1±0.2
2±0.2
3±0.2
1±0.15
2±0.2
3±0.2
1±0.2
2±0.2
3±0.2
5±0.5
25±3
60±3
7±1
16±2
0.7±0.1
3±0.2
5±1
5±1
5±1
5±1
0.4±0.1
3±0.2
Film
Film
Film
Film
Film
Film
Film
Film
Film
Injection Molding
Injection Molding
Injection Molding
Extrusion Coating
Extrusion Coating
Lamination, Blow Molding & Tubing
Wire & Cable
Rotomolding
Rotomolding
Rotomolding
Rotomolding
Miscellaneous
Miscellaneous
LLDPE
1918
General purpose blown film liners
Cast and blown films
Cast stretch films, wire and cable compounds
High stretch blown films
High stretch cast and blown films
High stretch films
High stiffness blown films, blending, lamination
High stiffness blown films, blending, lamination
High stiffness blown films, blending, lamination
Pails, containers
Lids, flexible closures
Fast cycle, thin-wall containers
General purpose grade, blending
Blending
Flexible irrigation pipes, small containers, blending
Blending component for wire and cable, cross-linked conduits
Standard general purpose grade
High stiffness applications
High stretch applications
Containers with high ESCR for chemicals storage
Geomembranes, coex films
Cast and diaper backing films
2120
As a global corporation active in natural gas-based products, we also produce
Butene-1, Methanol, and Ethylene Glycols, described as below. Among the other
prominent producers of ethylene products in the Middle East, we are the only one
that has secured feedstock for its plants.
Butene-1
Butene-1 is a colorless, combustible gas which is easily condensable under
pressure. It is a linear alpha-olefin with the formula C4H8 and used as a
co-monomer for production of polyethylene.
In almost all our plants, we produce and use Butene-1 with a capacity of 60 KT/Y.
Methanol
Methanol is a good solvent, but very toxic, extremely flammable, hygroscopic with
a wide range of applications in industry, such as formaldehyde production, MTBE,
acetic acid, fuels, solvents, etc. This simple single carbon alcohol is a volatile solvent
and a light fuel.
Our plant has a nominal capacity of 1650 KT/Y with Lurgi technology. It is still
under construction and will come in operation in 2019.
Ethylene Glycols
Monoethylene glycol (Ethylene glycol) is a colorless, virtually odorless and
slightly viscous liquid. It is soluble in with water, alcohols, aldehydes and many
organic compounds. Ethylene glycol is used as raw material in production of
PET, antifreeze in cooling and heating systems, softener in textiles, and also
manufacturing plasticizers and polyurethanes.
On a place of 7 hectares, the plant will come into production in 2019 and has a
total capacity of 550 KT annually. Beside MEG, we will have DEG and TEG in our
product group.
Other Products