about this manual - fujitsu global€¦ · · 2005-09-128 a configuration sheet server menu...

PRIMERGY RX100 S2 Configuration Sheets

About this manual

� Abbreviations

The following expressions and abbreviations are used to describe the product names used in this manual.

Microsoft, Windows, Windows Server are registered trademarks of the Microsoft Corporation in the USA and other countries. Intel, Pentium, and Celeron of registered trademarks of the Intel Corporation and affiliated companies in the United States and/or other countries.Other product names used are trademarks or registered trademarks of their respective manufacturers. Other products are copyrights of their respective manufacturers.

All Rights Reserved, Copyright© FUJITSU LIMITED 2005

A Configuration Sheet

Use this form to record the hardware configuration and various settings of your server.

B Design Sheet

Use this form to record the software settings.

C Accident Sheet

Use this form to record any failures that occur in your server.

Product names Expressions and abbreviations

PRIMERGY RX100 S2 This server, or server

Microsoft Windows Server 2003, Standard Edition Windows Server 2003, Standard Edition or Windows 2003

Microsoft Windows 2000 Server Windows 2000 Server or Windows 2000

1

2

Contents


A.1 Hardware Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

A.2 BIOS Setup Utility Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

A.3 System Resource Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

A.4 RAID Design Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

B Design Sheet

B.1 RAID Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

B.2 Disk Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

B.3 OS Wizard (Windows 2003 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 13

B.4 OS Wizard (Windows 2000 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 18

B.5 Application Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

C Accident Sheet

A.1 Hardware Configuration


Use this form to record the hardware configuration and various settings of your

server.

Fill-in (or mark in some way) the checkboxes (❑) appropriate for your server.

A.1 Hardware Configuration

� The internal CD-ROM drive unit

� The internal hard disk units

� CPU

� Memory

Installed position Product ID

CD-ROM drive bay ❑ CD-ROM ATAPI

Installed

positionInstallation internal hard disk units

Bay 1 ❑ 36.4GB ❑ 73.4GB ❑ 146.8GB

Bay 2 ❑ 36.4GB ❑ 73.4GB ❑ 146.8GB

Installation CPU

❑ Celeron® Processor D 330 (2.66GHz / 256KB)

❑ Pentium® 4 Processor 3EGHz / 1MB

* One CPU is installed in all models.

Installation slot Installation memory

Memory slot 1(*) ❍256MB ❑ 512MB ❑ 1GB

Memory slot 2 ❑ 256MB ❑ 512MB ❑ 1GB



* 256MB is installed in memory slot 1 for all models (except when custom made service is used).

3

4


� Expansion cards

1 2

Eth. Ctrl 1000-BASE-T Cu (PG-1852) - ❑

Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) - ❑

RAID Ctrl 1-Channel 64MB (PG-141CL1) ❑ -

SCSI Ctrl U160 lp (PG-130L) ❑ ❑

Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L) - ❑

Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L) - ❑

-: indicates that this item cannot be installed.

PCI slotExpansion card (Product ID)

A.2 BIOS Setup Utility Parameters


The marks used in each menu indicate:

❑: Parameters ❍ : Settings at time of purchase ♦: Unchangeable settings

� Main menu

Setting

Enter current time

Enter current date

❑Disabled ❑360KB 5 1/4" ❑1.2MB 5 1/4" ❑720KB 3 1/2"

♦ 1.44/1.25MB 3 1/2" ❑2.88MB 3 1/2"

[Enter]

Type❑User ♦ Auto ❑None ❑ATAPI Removable ❑CD-ROM ❑ IDE Removable

❑Other ATAPI

CHS Format, Cylinders, Heads, Sectors,

Maximum CapacityDisplay/set cylinders/heads/sectors/maximum capacity of the disk.

LBA Format, Total Sectors,

Maximum CapacityDisplay/set total sectors/maximum capacity of the disk.

Transfer Mode ❑Disabled ❑2 Sectors ❑4 Sectors ❑8 Sectors ❑16 Sectors

LBA Translation ❑Disabled ❑Enabled

PIO Mode❑Standard ❑Fast P IO 1 ❑Fast P IO 2 ❑Fast P IO 3 ❑Fast P IO 4

❑FPIO 3 / DMA 1 ❑Fast P IO 4 / DMA 2

32 Bit I/O ♦ Disabled ❑Enabled

Ultra DMA Mode ❑Disabled ❑Mode 0 ❑Mode 1 ❑Mode 2 ❑Mode 3 ❑Mode 4 ❑Mode 5

[Enter]

Type ♦ Auto ❑None

[Enter]

Type ♦ Auto ❑None

[Enter]

POST Errors ❑Disabled ♦ Enabled

Keyboard Check ❑Disabled ❍Enabled

SM Error Halt ❑Disabled ♦ Enabled

Quick Boot ♦ Disabled ❑Enabled

Quiet Boot ❑Disabled ❍Enabled

Memory Testing ❑Disabled ♦ Enabled

Boot Menu ❑Disabled ❍Enabled

Boot Sequence❑CD-ROM Drive ❑Removable Devices ❑Hard Drive

❑ IBA GE Slot 0208 v1217 ❑ IBA GE Slot 0430 v1217

MultiBoot for HDs ❑Disabled ♦ Enabled

Display available base memory size up to 1MB

Display memory size of 1MB or more

Diskette A

Parameters

System Time

System Date

Parallel ATA

Boot Options

Base Memory

Extended Memory

SATA Port 0

SATA Port 1

5

6


� Advanced menu

Setting

[Enter]

❍Disabled ❑Enabled ❑Auto

❍3F8/IRQ 4 ❑2F8/IRQ 3 ❑3E8/IRQ 4 ❑2E8/IRQ 3

❑System ❍BMC ❑Shared

♦ Local ❑Remote ❑Remote Once

❑Disabled ❍Enabled

❑Disabled ❑Enabled ❍Auto Detect

[Enter]

[Enter]

Device ❑Disabled ♦ Enabled

Option ROM Scan ❍Disabled ❑Enabled

Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h

Device ❑Disabled ♦ Enabled



[Enter]

❑Disabled ♦ Auto ❑ IRQ 3 ❑ IRQ 4 ❑ IRQ 5 ❑ IRQ 7 ❑ IRQ 9 ❑ IRQ 10

❑ IRQ 11 ❑ IRQ 15

❑Disabled ♦ Auto ❑ IRQ 3 ❑ IRQ 4 ❑ IRQ 5 ❑ IRQ 7 ❑ IRQ 9 ❑ IRQ 10

❑ IRQ 11 ❑ IRQ 15

[Enter]

Option ROM Scan ❑Disabled ♦ Enabled

Bus Master ❑Disabled ♦ Enabled



Bus Master ❑Disabled ♦ Enabled


[Enter]

[Enter]

❑Disabled ♦ Enabled


♦ Enabled

♦ 1 ❑10 ❑15 ❑20 ❑30 ❑60


♦ Disabled ❑Enabled







❑Expansion ROM Area ♦ Top of Base Memory

Parameters

Fast String operations

Ethernet on Board

PCI Slot 1 Configuration

PCI IRQ Line 0/VGA

Peripheral Configuration

Serial

Floppy Type

PCI Configuration

Diskette Controller

Base I/O address

Mouse Controller

Serial Multiplexer

PCI Device, Embedded Ethernet A

PCI Device, Embedded Ethernet B

Delay prior to Enabling the TCC

PCI IRQ Configuration

Compatible FPU Code

USB 1.1 Host Controller

USB BIOS Legacy Support

Split Lock operations

PCI IRQ Line 1/ETHERNET B

PCI SLOTS Configuration

Adjacent Sector P refetch

APIC

USB 2.0 Host Controller

BIOS Work Space Location

PCI Slot 2 Configuration

CPU Mismatch Detection

Hyper Threading

L3 Cache

CPU Settings

Advanced System Configuration


� Security menu

Setting

[Enter]


❍Off ❑On

Set Resume Time


❑Always OFF ❍Previous State ❑Always ON

❑Yes ❍No

❑Yes ♦ No

❑1.1 ♦ 1.4


❑Other ♦ DOS


♦ Legacy IDE ❑Native

♦ Disabled ❑Enabled

Remote

Multiprocessor Specification

Reset Configuration Data

Secured Setup Configurations

Power Failure Recovery

Resume On Time

Resume Time

Power On/Off

S-ATA Interface

Power On Source

Large Disk Access Mode

Parameters

S-ATA Mode

LSI SATA RAID

LAN

Windows 2003 EMS Function

Parameters Setting

Setup Password Displays the existence or nonexistence of a password

System Password Displays the existence or nonexistence of a password

Set Setup Password Set Setup password

Set System Password Set System password

Setup Password Lock ❍Standard ❑Extended

SETUP prompt ❑Disabled ❍Enabled

Virus Warning ♦ Disabled ❑Enabled

System Load ❍Standard ❑Diskette/CDROM Lock

Diskette Write ❑Disabled ❍Enabled

Flash Write ❑Disabled ❍Enabled

7

8


� Server menu

Setting

❍Disabled ❑Enabled

❍Continue ❑Reset ❑Power Cycle

❍0 ❑0-100( )

❍2 ❑1-30( )

❑0-15( ) ♦ 10

❍3 ❑0-7( )

♦ Disabled ❑Remote Image Disk ❑LAN

♦ Boot Option ❑Diagnostic Boot

♦ 0 ❑1-16( )


❍5 ❑0-31( )

[Enter]

Display IPMI Specification Version

Display BMC Firmware version


❍Overwrite ❑Maintain

Display number of recorded logs

Display number of remaining recordable logs

Display contents of system event logs

Display contents of system event logs in list mode

Display sensor data including temperature and voltage

[Enter]

Local IP Address Unchangeable

Subnet Mask Unchangeable

Gateway Address Unchangeable

User ID 1 Password Unchangeable

[Enter]

❍Enabled ❑Disabled ❑Failed

[Enter]

DIMM 0 ❍Enabled ❑Disabled ❑Failed




[Enter]


♦ Serial

❍Serial ❑LAN

♦ Direct ❑Via modem

❑300 ❑1200 ❑2400 ❍9600 ❑19.2K ❑38.4K ❑57.6K ❑115.2K

❑VT100 ❑VT100, 8bit ❑PC-ANSI, 7bit ❑PC ANSI ❍VT100+ ❑VT-UTF8

❍None ❑XON/XOFF ❑CTS/RTS

❑Standard ❍Enhanced

Parameters

CPU Status

ASR&R Boot Delay (min)

Boot Retry Counter

Diagnostic System

Next Boot uses

O/S Boot Timeout

Diagnostic PXE boot device

Console Redirection

Remaining Event Log number

System Event Log

System Event Log (list mode)

Realtime Sensor Data

CPU Status

Channel A

Channel B

Mode

Timeout value

IPMI Specification Version

BMC Firmware

Critical Temperature Monitoring

Clear Screen Delay (sec)

Power Cycle Delay

IPMI

Clear System Event Log

Event Log Full Mode

Existing Event Log number

Memory Status

LAN Settings

Console Redirection Port

Port

Media Type

Mode

Console connection

Baud Rate

Protocol

Flow Control

A.3 System Resource Chart

A.3 System Resource Chart

� I/O port addresses

The following chart lists the I/O port address.

| | | | | | | | | | | | | | | | | | | | | | | |

Serial port | | | | | | | | | | | | | | | | | | | | | | | | BIOS setup

* indicate the I/O port address space that can be selected in the expansion card.

indicates that some or all of the 16 bytes that follow the marker address may be used

( space selected for default)

indicates that some or all of the 32 bytes that follow the marker address may be used

( space selected for default)

400Product nameI/O port address (h)

Setup method300 340 380 3C0200 240 280 2C0100 140 180 1C0

9

1


A.4 RAID Design Sheet

� Logical drive information

� System pack definitions

Logical drive

(LD(*))

RAID

levelCapacity

0

1

0

1

0

1

0

1

0

1

0

1

0

1

*: Shown as "HS(*)" for hot spares

12, 13, 14, 158, 9, 10, 11,

15

(CH=0) ID= 0, 1, 2, 3, 4, 5, 6, 7,

11, 12, 13, 14,7, 8, 9, 10,3, 4, 5, 6,(CH=0) ID= 0, 1, 2,

12, 13, 14, 158, 9, 10, 11,

15

(CH=0) ID= 0, 1, 2, 3, 4, 5, 6, 7,

11, 12, 13, 14,7, 8, 9, 10,3, 4, 5, 6,(CH=0) ID= 0, 1, 2,

12, 13, 14, 158, 9, 10, 11,

15

(CH=0) ID= 0, 1, 2, 3, 4, 5, 6, 7,

11, 12, 13, 14,7, 8, 9, 10,

14, 15

(CH=0) ID= 0, 1, 2, 3, 4, 5, 6,

10, 11, 12, 13,6, 7, 8, 9,

Physical drive (CH=0(fixed))

(Example)( 0 ) 36000MB (CH=0) ID= 0, 1, 2, 3, 4, 5,

( )

( )

( )

( )

( )

( )

Installation HDD bay SCSI-CH SCSI-ID Model name Capacity Version LD(*)

(Example) Bay( 1 ) CH= ( 0 ) ID= ( 0 ) MAN3184MC 17521MB 0107 0




Bay( ) CH= ( ) ID= ( )

Bay( ) CH= ( ) ID= ( )

Bay( ) CH= ( ) ID= ( )

Bay( ) CH= ( ) ID= ( )

Bay( ) CH= ( ) ID= ( )

Bay( ) CH= ( ) ID= ( )

Bay( ) CH= ( ) ID= ( )

Bay( ) CH= ( ) ID= ( )

*: Shown as "HS(*)" for hot spares

0

B.1 RAID Wizard

B Design Sheet

When setting up the server using ServerStart, set the default values in advance to

ensure setup is performed smoothly.

B.1 RAID Wizard

Setting

❑ No RAID ❑ Automatic ❑ Manual

❑ Use existing array

RAID Controller ❑ PG-141C1L

Controller Number (Default - 0)

RAID Level ❑ RAID0 ❑ RAID1

Number of Disks Number:

For manual and

auto settingExisting RAID Array ❑ Delete

Configuration mode

For manual and

auto setting

For manual

setting

Parameters

11

1

B Design Sheet

B.2 Disk Wizard

Parameters Setting

Controller Type ❑ RAID

Disk Number (Default - 0)

File System ❑ NTFS ❑ FAT

Quick Format ❑ Yes ❑ No

Label (Default - SYSTEM)

Partit ion Size ❑ Automatic ❑ MB

Partit ion Usage ❑ BOOT ❑ OS ❑ DATA



Label (Default - DATA)













Erase all existing partit ions on all displayed

disks❑ Delete

Make copies when installing multiple disks or more sheets are needed.

2

B.3 OS Wizard (Windows 2003 Install Wizard)


(continued)

Setting

❑ Windows Server 2003, Standard Edition

❑ Windows Server 2003, Enterprise Edition

❑ per Seat

❑ per Server

(Only when concurrent users are selected)

❑ a work group ❑ a domain

(Default - MYUSERGROUP)

❑ Install Operating System from Local CD

❑ Install Operating System from Remote Server

(Default - (GMT+01:00) Amsterdam, Berlin,

Bern, Rome, Stockholm, Vienna)

❑ Use Default ❑ Drive Letter

❑ C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑ K: ❑ L: ❑ M: ❑ N:

❑ O: ❑ P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑ W: ❑ X: ❑ Y: ❑ Z:

❑ Use Default ❑ Prompt User

❑ Specify now

(Default - \winnt)

❑ ― ― ― ―

❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768 ❑ 1156 * 864

❑ 1280 * 1024 ❑ 1600 * 1200

❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100

❑ 16 colors ❑ 256 colors ❑ High Color (16bits)

❑ T rue Color (24bits) ❑ T rue Color (32bits)

Password for Administrator

Installation method

Installation destination

When selecting drive name

When installing OS from remote server

User account to create computer account

Password

Remote Source Path

Remote Username

Installation Directory

T ime Zone

Installation Drive

Remote Password

Organization

Computer Name

User Name

Display settings

BitsPerPel

Resolution

Product-ID

VRefresh

User Name

Parameters

Install Windows 2003

Installation Directory and Time zone

Computer Identification

Operating System Type

License Mode

User permitted

will participate in

Workgroup or Domain Name

User account

13

1

B Design Sheet

Copy to install multiple adapters.

(continued)

Setting

❑ Install Unattended

❑ Install Manually

❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk ❑ DLC

❑ NetMon ❑ PPTP

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway

IP-Address (additional) (only when added)

Subnet Mask (additional) (only when added)

Default Gateway (additional) (only when added)

DNS domain name (only when specified)

DNS server address (only when specified)

Use WINS ❑ Use

WINS server address DHCP (only when selected to use)

❑ Use NetBIOS setting from the DHCP Server

❑ Use NetBIOS over TCP/IP

❑ Do not use NetBIOS over TCP/IP

Internal network number 0x

Network number 0x

Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3

❑ Ethernet SNAP ❑ Auto-detection


❑ NetMon ❑ PPTP

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway


Subnet Mask (additional) Setting




Use WINS ❑ Use

WINS server address DHCP (only when selected to use)





Network number 0x



NetBIOS option

Connection name

Use of DHCP (When TCP/IP selected)

Only when NWIPX is selected

A

d

a

p

t

e

r

2

Available protocols

D

o

n

o

t

u

s

e

D

H

C

P


NetBIOS option

Connection name


Parameters

Network protocol

Network protocol property (for install unattended)

Installation method

Available protocols

D

o

n

o

t

u

s

e

D

H

C

P

A

d

a

p

t

e

r

1

4


(continued)

Setting

❑ Install default Components

❑ Install customized Components

Accessories

❑ Clipboard viewer

❑ Desktop Wallpaper

❑ Document Template

❑ Paint

❑ All available mousepointers

❑ Word pad

❑ Calculator

❑ Character Map

Accessibility Wizard ❑ Install

Communications❑ Chat

❑ Hyper Terminal

ASP.NET web development platform ❑ Install

Application server console ❑ Install

Internet information services

(IIS)

❑ FrontPage 2002 Server Extensions

❑ FTP (File Transfer P rotocol) service

❑ NNTP Service - NNTP Service

❑ SMTP Service - SMTP Service

❑ World Wide Web Server - Internet Information Services ASP support

❑ World Wide Web Server - Internet Information Services web DAV publishing

❑ World Wide Web Server - World Wide Web (WWW) Service

❑ World Wide Web Server - Internet Information Services internet data connector

❑ World Wide Web Server - Internet Information Services web user interface

❑ Management Console - based administration tools for IIS

❑ Internet Information Services

Network COM + access ❑ Install

DTC network access ❑ Install

❑ Install

❑ Install

❑ Install

❑ Install

❑ Install ❑ Server components of the Certificate Service

❑ Web client component of the Certificate Services

□ Install □ POP3 main service □ POP3 web user interface

(Default - \Inetpub\Ftproot)

(Default - \Inetsrv\WWWroot)

❑ Permit remote desktop during unattended setup

❑ Access permit compatible with Windows 2000 Users

❑ Access permit compatible with Terminal Server 4.0 Users

❑ Number of simultaneous users ❑ Number of connected sessions

❑ Application server mode ❑ Remote management mode

Application and utilit ies

Application server

WWW service property (only when WWW service is se lected)

Select installation method

Software Components

FTP site directory

Indexing Server Files

Terminal Services

Terminal Services licensing

Remote Installation Services

Certificate Service

POP3 root component

FTP service property (only when FTP service is se lected)

Current mode for terminal service

WWW server directory

Terminal server property (only when terminal server is se lected)

Authorize the following access permits

to terminal service users

Terminal service

License Mode

Only when selecting components to install

Parameters

15

1

B Design Sheet

(continued)

Setting

❑ Services for Macintosh (SFM)

❑ Print Service for Macintosh

❑ Print Service for UNIX

❑ WINS Server

❑ Internet Authentication Service (IAS)

❑ MS DNS Server

❑ Simple TCP/IP Service

❑ MS DHCP Server

❑ Network Monitor tools

❑ SNMP Service (Required to install SNMP-ServerView)

❑ Send

❑ Receive

(only when specified)

❑ Physical ❑ Datalink and sub network

❑ End-to-End ❑ Application ❑ Internet

Services

Other network file and Print Services

Send authentication trap

Receivable community name

Host name

Contact

Address

Agent

Service

Community name

Trap destination

SNMP details (only when SNMP is se lected)

Parameters

Management and Monitoring Tools

Networking Services

Security

Receive SNMP packet from all hosts

Trap

6


Setting

❑ Install

❑ Create a domain in a new forest

❑ Additional domain controller of the existing domain

❑ Create a new child domain under the existing domain tree

❑ Create a new domain tree in the existing forest

❑ Permit

Password

Domain name

Complete DNS name of the new domain

Domain NetBIOS name


New child domain name

Domain NetBIOS name

User name

Create a new domain tree in the existing forest (only when selected)


User name

Password

Domain

Create a new child domain under the existing domain tree (only when selected)

Domain NetBIOS name

User name

Password

Domain

Additional domain controller of the existing domain (only when selected)

Log folder

SYSVOL folder location

Install Active Directory


Create a domain in a new forest (only when selected)

Compatibility with Windows 2000 or

earlier server OS

Database folder

Active Directory type

Active Directory details se tting (only when DNS is se lected)

Parameters

17

1

B Design Sheet


(continued)

Setting

❑ Windows 2000 Server

❑ Windows 2000 Advanced Server

❑ per Seat

❑ per Server

(Only when concurrent users are selected)

❑ a work group ❑ a domain

(Default - MYUSERGROUP)

❑ Install Operating System from Local CD

❑ Install Operating System from Remote Server

(Default - (GMT+01:00) Amsterdam, Berlin,

Bern, Rome, Stockholm, Vienna)

❑ Use Default ❑ Drive Letter

❑ C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑ K: ❑ L: ❑ M: ❑ N:

❑ O: ❑ P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑ W: ❑ X: ❑ Y: ❑ Z:

❑ Use Default ❑ Prompt User

❑ Specify now

(Default - \winnt)

❑ ― ― ― ―

❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768 ❑ 1156 * 864

❑ 1280 * 1024 ❑ 1600 * 1200

❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100

❑ 16 colors ❑ 256 colors ❑ High Color (16bits)

❑ T rue Color (24bits) ❑ T rue Color (32bits)

Remote Username

User Name

Display settings

BitsPerPel

VRefresh

Workgroup or Domain Name

Parameters

Install Windows 2000

Installation Directory and Time zone

Computer Identification

License Mode

OS

Password for Administrator

User account to create computer account (only when Domain is selected)

User permitted

will participate in

Installation Directory

When selecting drive name

User account

Remote Password

Installation method

Password

When installing OS from remote server

T ime Zone

Installation Drive

Remote Source Path

Installation destination

User Name

Organization

Computer Name

Resolution

Product-ID

8


Copy to install multiple adapters.

(continued)

Setting

❑ Install Unattended

❑ Install Manually


❑ NetMon ❑ PPTP

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway






Use WINS ❑ Use

WINS server address (only when selected to use WINS)





Network number 0x




❑ NetMon ❑ PPTP

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway






Use WINS ❑ Use

WINS server address (only when selected to use WINS)





Network number 0x



Network protocol

Network protocol property (for install unattended)

Connection name

A

d

a

p

t

e

r

2

Available protocols

D

o

n

o

t

u

s

e

D

H

C

P


D

o

n

o

t

u

s

e

D

H

C

P

Installation method

Available protocols

A

d

a

p

t

e

r

1


NetBIOS option


Connection name

Parameters

NetBIOS option

Use of DHCP (When TCP/IP selecte

19

2

B Design Sheet

(continued)

Setting

❑ Install default Components

❑ Install customized Components

❑ (IIS) common components

❑ (IIS) online help

❑ FTP (File Transfer P rotocol) server

❑ Internet service manager (HTML)

❑ Internet information service snap-in

❑ NNTP Service

❑ SMTP Service

❑ WWW (World Wide Web) server

❑ Remote install service

❑ Remote storage

❑ Terminal service

❑ Terminal service license

❑ Terminal service client creator file

❑ Index service

❑ COM Internet service proxy

❑ Front00 Server Extensions

❑ Certificate service

❑ Certificate service web registration support

❑ Certificate service CA

(Default - \Inetpub\Ftproot)

(Default - \Inetsrv\WWWroot)

❑ Hyper terminal ❑ Dialler

❑ Chat ❑ Message queue service

❑ Other network file and Print Service

❑ CD player ❑ Media player

❑ Utopia sound setting ❑ Sound recorder

❑ Volume control ❑ Sample sound

❑ Accessibility setting wizard ❑ Character Map

❑ Calculator ❑ Paint

❑ Word pad ❑ Document Template

❑ Script debugger ❑ Object packager

❑ Desktop Wallpaper ❑ Mousepointer

❑ Free cell ❑ Mine sweeper ❑ Pinball ❑ Solitaire

❑ Simple Network Management P rotocol (SNMP)

❑ Domain Name System (DNS)

❑ Dynamic Host Configuration Protocol (DHCP)

❑ Windows Internet Name Service (WINS)

❑ Simple TCP/IP service

❑ Network Monitor tool

❑ Internet authentication service

❑ Site Server ILS service

❑ P rint service for UNIX

❑ P rint service for Macintosh

❑ Connection manager component

❑ File service for Macintosh

WWW server directory

FTP site directory

Service

Select installation method

Software Components

Parameters

Communications

Multimedia

Accessories

Service

Service

Game

Only when selecting components to install

0


Setting

❑ Send

❑ Receive

(only when specified)

❑ Physical ❑ Datalink and sub network

❑ End-to-End ❑ Application ❑ Internet

❑ Install

❑ Create a new forest of a domain tree

❑ Add additional domain controller of the existing domain

❑ Add a new child domain under the existing domain tree

❑ Place a new domain tree in the existing forest

❑ Permit

Database location

Security

Contact

Service

Community name

Receive SNMP packet from all hosts

Receivable community name

Trap destination

Send authentication trap

SNMP details (only when SNMP is se lected)

Install Active Directory

Active Directory details setting (only when DNS is se lected)

Complete DNS name of the new tree

Domain

User name

Password

Place a new domain tree in the existing forest (only when selected)

Complete DNS name of the domain

Domain

Log location

Domain name

Add a new child domain under the existing domain tree (only when selected)

User name

Password

Add additional domain controller of the existing domain (only when selected)

Access permit compatibility with

Windows 2000 or earlier server

SYSVOL folder location

Create a new forest of a domain tree (only when selected)

Domain NetBIOS name

Parent domain name

Child domain name

Domain NetBIOS name

Complete DNS name of the new tree

Domain NetBIOS name

User name

Password

Parameters

Active Directory type

Address

Host name

Trap

Agent

21

2

B Design Sheet

B.5 Application Wizard

Setting

❑ Windows 2000 service pack

❑ ServerView

❑ DSNAP

(only when selecting additional software)

❑ Install selected application from Local CD

❑ Install selected application from Remote Server

❑ Install ❑ Do not install

Remote Resource Path

Remote Username

Remote Password

When installing from remote server

Parameters

Installation method

Installable applications

Userspecific Command

2

C Accident Sheet

Name(Product ID)

OS

Phase of accident

DATE/TIME

LAN/WAN config.

Environment

PRIMERGY RX100 S2 (PG )

What did you do?, what message? etc.

Attached paper Yes/No

For optional configuration and settings, use Configuration Sheet in the section A.

23

• The contents of this manual may be revised without prior notice.

• Fujitsu assumes no liability for damages to third party copyrights or other rights

arising from the use of any information in this manual.

• No part of this manual may be reproduced in any form without the prior written

permission of Fujitsu.

PRIMERGY RX100 S2

Configuration Sheets

B7FH-3371-01ENZ0-00

Issued on

Issued by

September, 2005 FUJITSU LIMITED

about this manual - fujitsu global€¦ · · 2005-09-128 a configuration sheet server menu...

Documents