abm milo guard small parts identification...

ABM Milo Guard small parts identification diagrams

ABM Milo Guards and parts are manufactured in Hutchinson, KS by ShieldAg Equip.

800‐798‐1968 www.shieldag.com

2019 ABM Milo Guard Retail Pricing

JOHN DEERE 200- and 900-series headers with 3" guard point spacing Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-537 14 4 3 14 14 40 $503.52 26 $163.43 $666.95FG-577 15 1 7 16 16 43 $554.18 28 $176.00 $730.18FG-617 16 5 3 16 16 46 $578.01 30 $188.57 $766.58FG-697 18 6 3 18 18 51 $652.49 34 $213.72 $866.21FG-737 19 3 7 20 20 54 $703.15 36 $226.29 $929.44FG-777 20 7 3 20 20 58 $726.98 38 $238.86 $965.84FG-857 22 8 3 22 22 63 $801.46 42 $264.00 $1,065.47FG-937 24 9 3 22 22 68 $867.09 46 $289.14 $1,156.24FG-997 25 8 5 26 26 75 $938.52 49 $308.00 $1,246.52

FG-1177 30 5 11 32 32 86 $1,126.24 58 $364.57 $1,490.81↑

Guard Guard One ABM-2005 Part # Clasp Clip Part # Clasp Clip Grain Saver Boot

H-61954 C-2 H-3 H-113571 C H-3 On every OTHER TyneH-75386 C H-3 H-145791 C H-3 OPTIONAL

H153855 or H25603 C H-3 H-153719 C-2 H-3Other C H

JOHN DEERE Draper Headers, 600- and 900-series RIGID DRAPERS and 600-series Rigid Auger, guards on 4" spacing Optional Retail Price Total KitCut size # of ABM-D-6 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 6-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-925D 25 12 SEE NOTE 24 24 53 $773.31 72 $452.57 $1,225.89FG-930D 30 15 30 30 66 $966.64 90 $565.72 $1,532.36

FG-635/R/D 35 17 SEE NOTE 34 34 73 $1,095.53 102 $641.15 $1,736.68FG-936D 36 18 36 36 79 $1,159.97 108 $678.86 $1,838.83

NOTE: 25' and 35' drapers use 12ea or 17ea 6-point milo guards and leave 6" of each end of header without milo guards ↑Guard One ABM-2005 Part # Clasp Clip Part # Clasp Clip Grain Saver Boot

H-213405 JDF-010 ABM-D-1J H-229539 JDF-010 ABM-D-1J On EVERY TyneH213508 JDF-010 ABM-D-1J RECOMMENDED

JOHN DEERE Flex Headers, 600- and 900-series FLEX, BOLT-ON guard system, guards on 4" spacing Optional Retail Price Total KitCut size # of ABM-D-3F New Bolts One of ea Deere Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 3-points Required LH & RH finger Bolt # Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-060 / 620F 20 19 40 2 03M7196 65 $1,180.70 59 $370.86 $1,551.56FG-066 / 622F 22 21 44 2 03M7196 72 $1,300.05 65 $408.57 $1,708.62FG-075 / 625F 25 24 48 2 03M7196 82 $1,479.07 74 $465.15 $1,944.22

FG-090F / 630F 30 29 58 2 03M7196 99 $1,777.44 89 $559.43 $2,336.87FG-105F / 635F 35 34 70 2 03M7196 116 $2,075.80 104 $653.72 $2,729.52FG-120F/ 640F 40 39 80 2 03M7196 133 $2,374.17 119 $748.00 $3,122.18

This is a bolt-on 3-point system, purchase bolts from Shield or your dealer, Shield ABM-3M7196 retail $1.25ea ↑NEW FOR 2016, Kits will include 1ea Left hand Single finger ABM-D-3FL One ABM-2005 and 1ea Right hand Single finger ABM-D-3FR Grain Saver Boot

Guard NOTE: The most popular headers are 625F, 630F and 635F On EVERY TynePart # Guard Description OPTIONAL

H213398 Guard with (2) LONG points and (1) SHORT pointH205992 Guard with (2) LONG points and (1) SHORT pointH205448 Guard with (2) LONG points and (1) SHORT pointH229537 Heat-treated Guard with (2) LONG points and (1) SHORT pointH213507 Guard with (1) LONG point and (2) SHORT points

AH213055 Guard with (1) LONG point and (2) SHORT pointsH229538 Heat-treated guard with (1) LONG point and (2) SHORT points

www.abm-mfg.com 800-798-1968


CASE IH / INT. HARVESTER, guards on 3" spacing Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-717 18 8 1 18 18 53 $664.41 35 $220.00 $884.41FG-797 20 9 1 20 20 58 $738.89 39 $245.14 $984.04FG-877 22 10 1 22 22 68 $813.38 43 $270.29 $1,083.66FG-937 24 9 3 24 24 68 $875.95 46 $289.14 $1,165.09

FG-1007 25 9 4 26 26 73 $944.48 50 $314.29 $1,258.76FG-1207 30 15 0 30 30 88 $1,117.27 60 $377.15 $1,494.42FG-118D 30 6 10 32 32 88 $1,132.19 59 $370.86 $1,503.05FG-1407 35 0 20 40 40 103 $1,370.57 70 $440.00 $1,810.57

FG-1407 ** 36 0 20 40 40 103 $1,370.57 70 $440.00 $1,810.57FG-136FD 36 17 0 34 34 103 $1,266.24 68 $427.43 $1,693.67FG-170FD 40 16 6 44 44 114 $1,602.93 85 $534.29 $2,137.22FG-186FD 45 18 6 48 48 128 $1,751.90 93 $584.58 $2,336.47

** Alternate for RIGID Draper, leaving one guard point exposed ↑FD headers are Flex-drapers made by MacDon for CNH and New Holland One ABM-2005 40' and 45' Flex-drapers use 6ea 7 point Milo-guards in center of header Grain Saver BootFor All Flex-drapers, cover center of header first, then work out from the main flex joints to cover outboard guards On every OTHER Tyne

Guard Guard See NOTE: OPTIONALPart # Clasp Clip Part # Clasp Clip

633089 C-2 H-2 118344 C-2 or C H-4 Call ABM and we will walk you through what you need633240R1 C-2 H-3 87702973 C-2 or C H-4 for new-style draper and flex-draper platforms !!1307299 C-2 H-4 118301 C-2 or C H-4 800-798-1968

OTHER C H 87442324 C-2 or C H-4Use C-2 Clasp for 7/16" or 12mm bolt Use C-Clasp for 3/8" or 8mm bolt

NEW HOLLAND / FORD, guards on 3" spacing Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-697 18 6 3 18 18 51 $652.49 34 $213.72 $866.21FG-797 20 9 1 20 20 58 $738.89 39 $245.14 $984.04FG-877 22 10 1 22 22 68 $813.38 43 $270.29 $1,083.66FG-937 24 9 3 24 24 79 $875.95 46 $289.14 $1,165.09FG-977 25 6 7 26 26 69 $926.61 48 $301.72 $1,228.32

FG-1167 30 11 4 30 30 85 $1,093.45 58 $364.57 $1,458.02FG-118D 30 6 10 32 32 88 $1,132.19 59 $370.86 $1,503.05FG-1407 35 0 20 40 40 103 $1,370.57 70 $440.00 $1,810.57

FG-1407 ** 36 0 20 40 40 103 $1,370.57 70 $440.00 $1,810.57FG-136FD 36 17 0 34 34 103 $1,266.24 68 $427.43 $1,693.67FG-170FD 40 16 6 44 44 114 $1,602.93 85 $534.29 $2,137.22FG-186FD 45 18 6 48 48 128 $1,751.90 93 $584.58 $2,336.47

** Alternate for RIGID Draper, leaving one guard point exposed ↑FD headers are Flex-drapers made by MacDon for CNH and New Holland One ABM-2005 40' and 45' Flex-drapers use 6ea 7 point Milo-guards in center of header Grain Saver BootFor All Flex-drapers, cover center of header first, then work out from the main flex joints to cover outboard guards On every OTHER Tyne

Guard Guard See NOTE: OPTIONALPart # Clasp Clip Part # Clasp Clip65327 C-2 H-3 118344 C-2 or C H-4

695501 C-2 H-4 87702973 C-2 or C H-4 Call ABM and we will walk you through what you need8652187 C-2 H-4 118301 C-2 or C H-4 for new-style draper and flex-draper platforms !!858778 C-2 H-4 87442324 C-2 or C H-4 800-798-1968134024 C H-3 86615982 C-2 H-4219191 C-2 H-4 Use C-2 Clasp for 7/16" or 12mm bolt

8653340DS C-2 H-4 Use C-Clasp for 3/8" or 8mm boltOTHER C H

www.abm-mfg.com 800-798-1968


MASSEY FERGUSON/MASSEY HARRIS, guards on 3" centers Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-507 13 1 6 14 14 38 $485.66 25 $157.14 $642.80FG-547 14 5 2 14 14 41 $509.48 27 $169.72 $679.20FG-587 15 2 6 16 16 44 $560.14 29 $182.29 $742.43FG-627 16 6 2 16 16 45 $583.97 31 $194.86 $778.82FG-707 18 7 2 18 18 52 $658.45 35 $220.00 $878.45FG-787 20 8 2 20 20 58 $732.94 39 $245.14 $978.08FG-947 24 10 2 24 24 69 $881.90 47 $295.43 $1,177.34

FG-1167 30 11 4 30 30 86 $1,093.45 58 $364.57 $1,458.02FG-1407 35' draper 35 0 20 35 35 103 $1,348.43 70 $440.00 $1,788.43

35' Massey 9250 Draper uses JDF-10 C-Clasp and WND-004 H-3 Clip, Same as Gleaner Model 9250 ↑Guard Guard One ABM-2005 Part # Clasp Clip Part # Clasp Clip Grain Saver Boot

BC258AC C H-3 OTHER C H On every OTHER TyneBC240AC C H-3 OPTIONAL

GLEANER/DUETZ/ALLIS CHALMERS, guards on 3" spacing Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-667 17 3 6 18 18 49 $634.62 33 $207.43 $842.05FG-707 18 7 2 18 18 52 $658.45 35 $220.00 $878.45FG-747 19 4 6 20 20 55 $709.11 37 $232.57 $941.68FG-787 20 8 2 20 20 58 $732.94 39 $245.14 $978.08FG-867 22 9 2 22 22 63 $807.42 43 $270.29 $1,077.71FG-907 23 6 6 24 24 66 $858.08 45 $282.86 $1,140.94FG-947 24 10 2 24 24 69 $881.90 47 $295.43 $1,177.34FG-955 25 9 4 26 26 72 $944.48 50 $314.29 $1,258.76

FG-1127 27 0 16 32 32 81 $1,096.45 56 $352.00 $1,448.46FG-1207 30 15 0 30 30 88 $1,117.27 60 $377.15 $1,494.42

FG-1407 35' draper 35 0 20 35 35 103 $1,348.43 70 $440.00 $1,788.4335' Gleaner Draper uses JDF-10 C-Clasp and WND-004 H-3 Clip, Gleaner Model 9250 ↑

Guard Guard One ABM-2005 Part # Clasp Clip Part # Clasp Clip Grain Saver Boot

71341601 C H-4 OTHER C H On every OTHER Tyne OPTIONAL1116504 C H-3

Challenger/Lexion, guards on 3" spacing Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-1007 25 9 4 26 26 73 $944.48 50 $314.29 $1,258.76FG-1207 30 15 0 30 30 88 $1,117.27 60 $377.15 $1,494.42

FG-1387 / F535 35 5 14 38 38 103 $1,331.82 69 $433.72 $1,765.54FG-1607 40 13 8 42 42 118 $1,516.53 80 $502.86 $2,019.39

The Lexion F535 uses 38ea WND-004 H-3 Clip and the K11-001 C-2 Clasp ↑To Select Clips and Clasps for Challenger/Lexion/Claas Combines, please call us with your One ABM-2005 Guard Part Numbers, Guard Bolt Diameters and any special guard configurations Grain Saver Boot

On every OTHER Tyne OPTIONALwww.abm-mfg.com 800-798-1968


MACDON, guards on 3" guards Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-Boots FG-1207 30 15 0 30 30 86 $1,117.27 60 $377.15 $1,494.42FG-1407 35 0 20 40 40 103 $1,370.57 70 $440.00 $1,810.57FG-1447 36 18 0 36 36 102 $1,340.73 72 $452.57 $1,793.30

FG-136FD 36 17 0 34 34 103 $1,266.24 68 $427.43 $1,693.67FG-170FD 40 16 6 44 44 114 $1,602.93 85 $534.29 $2,137.22FG-186FD 45 18 6 48 48 128 $1,751.90 93 $584.58 $2,336.47

FD headers are Flex-drapers also made for CNH and New Holland ↑40' and 45' Flex-drapers use 6ea 7 point Milo-guards in center of header One ABM-2005 For All Flex-drapers, cover center of header first, then work out from the main flex joints to cover outboard guards Grain Saver Boot

Guard Guard On every OTHER TynePart # Clasp Clip Part # Clasp Clip OPTIONAL23064 C-2 H-4 118344 C-2 or C H-4 NOTE: Some MacDon setups use CaseIH draper guards26370 C-2 H-4 87702973 C-2 or C H-4 Call us with a guard part number and we can help you with the proper system

118345 C-2 H-4 118301 C-2 or C H-4 Call ABM and we will walk you through what you needOTHER C-2 H-4 87442324 C-2 or C H-4 for new-style draper and flex-draper platforms !!

Use C-2 Clasp for 7/16" or 12mm bolt Use C-Clasp for 3/8" or 8mm bolt 800-798-1968

WHITE, guards on 3" centers Optional Retail Price Total KitCut size # of FG-087 # of FG-077 # of # of Wt. Header Kit Grain Saver Boots For set of Price including

Set # (Width ft) 8-points 7-points Clips Clasps Lbs. Retail Price Quantity Required GS-boots GS-BootsFG-437 11 1 5 12 12 44 $417.13 21 $132.00 $549.13FG-517 13 2 5 14 14 39 $491.61 25 $157.14 $648.76FG-597 15 3 5 16 16 44 $566.10 29 $182.29 $748.38FG-717 18 1 8 18 18 53 $622.71 32 $201.14 $823.86FG-797 20 9 1 20 20 58 $738.89 39 $245.14 $984.04FG-877 22 10 1 22 22 68 $813.38 43 $270.29 $1,083.66FG-957 24 11 1 24 24 70 $887.86 47 $295.43 $1,183.29

↑Guard Guard One ABM-2005 Part # Clasp Clip Part # Clasp Clip Grain Saver Boot

9510220 C H-3 31-1713400 NO FIT On every OTHER TyneFC68-2 C H OTHER C H OPTIONAL

PART # ABM Replacement Parts 2019 Retail All of the Set #'s listed above have been proven to workFG-087 8 POINT SECTION $65.63 on the brands and header widths shownFG-077 7 POINT SECTION $59.67 Because Guard Part Numbers and OE-Guard Suppliers change frequently,

ABM-D-6 6 POINT SECTION $53.68 We recommend that you help your dealer specify a correct set of Milo-Guards for your machineABM-D-3F 3-PT Bolt-on guard $59.67 Please have this information when you contact your dealerABM-D-3FL Left finger w/ tyne wire $23.45 Guard part number or part numbers used on your machineABM-D-3FR Right finger w/ tyne wire $23.45 Model Number and cutting width

ABM-3M7196 M10-1.5 X 50mm carr. bolt $1.20 Main guard point spacing (usually either 3" or 4")JDF-010 C-CLASP $2.18 Guard bolt diameter, usually either 3/8", 7/16" or 10mm diameterK11-001 C-2 CLASP $2.18 Brand Name--some headers are "private labeled" for major OE Brands

WND-002 H-CLIP $2.25 We will assist you in the selection of a full set of milo-guards or replacementWND-004 H-3 CLIP $2.25 parts as needed so that you can get back in the field and start saving grain !!WND-103 H-4 CLIP $2.25 WARRANTY: ABM will replace any part it manufactures that proves to be defective WND-105 H-5 CLIP $2.25 for a period of one year from the date of purchase. ABM is not responsible for ABM-D-1 DRAPER CLIP $3.21 damages cause by improper installation or misuse of its products nor is ABM responsibleABM-D-1J JOHN DEERE DRAPER CLIP $3.21 for any consequential damages to combines or headers.11X-1308 Z-CLIP $3.2111G-1301 TINE CLIP $0.8411G-1401 GUARD POINT CLIP $1.05 www.abm-mfg.com11X-3202 TINE WIRE $1.95 800-798-196811X-3202F EXTRA LONG TINE WIRE $3.69ABM-2005 GRAIN SAVER BOOT $6.29

FLX HC-3 HOG RING $0.19


Schumacher EasyCut does not make headers. They make a world-class cutting system retrofittable to most modern combines. Therefore, ABM recommends that your farmer/customer goes back to the original fitup method for Milo Guards. COUNT the number of exposed guard points. Charts show options for headerwidths based on the number of exposed guard points. When cutting Sorghum (Milo), we recommend that Flex headers are "locked out" in the rigid position.All OEM Headers equipped with Schumacher EasyCut SCH guard and sickle cutting systems Total Kit

Cut size # of FG-087 # of FG-077 # of H-5 Clips # of C-Clasps Wt. Retail Price Grain Saver Retail Price Price includingSet # (Width ft) 8-points 7-points P/N WND-105 P/N JDF-010 Lbs. w/o GS boots Boots Required GS-boots GS-Boots

SCH-917-79 20 9 1 20 20 60 $738.87 39 $245.14 $984.02SCH-657-83 21 6 5 22 22 64 $789.53 41 $257.72 $1,047.24SCH-837-85 22 8 3 22 22 68 $801.44 42 $264.00 $1,065.44SCH-937-93 24 9 3 24 24 74 $875.92 46 $289.14 $1,165.07

SCH-947-100 25 9 4 26 26 78 $944.45 50 $314.29 $1,258.74SCH-1147-116 30 11 4 30 30 88 $1,093.42 58 $364.57 $1,457.99SCH-5117-117 30 5 11 32 32 88 $1,126.20 58 $364.57 $1,490.78SCH-1507-120 30 15 0 30 30 88 $1,117.24 60 $377.15 $1,494.39SCH-1707-136 36 17 0 34 34 103 $1,266.21 68 $427.43 $1,693.64SCH-0207-140 36 0 20 40 40 103 $1,370.53 70 $440.00 $1,810.53SCH-1667-170 40 16 6 44 44 119 $1,602.88 85 $534.29 $2,137.17SCH-1767-178 42 17 6 46 46 127 $1,677.36 89 $559.43 $2,236.80SCH-1867-186 45 18 6 48 48 139 $1,751.85 93 $584.58 $2,336.42

Part Number KEY: SCH-917 = 20' platform using 9ea 8-points and 1ea 7-point, -79 = 79 exposed guard points ↑ ALWAYS For retrofitting ABM Milo Guards to any OEM header equipped with Schumacher EasyCut, please COUNT the number of exposed One ABM-2005 INCLUDE guard points, use the charts to determine the correct SET # and quantities of 8-points and 7-points required to fill out the header Grain Saver Boot GRAIN SAVERFor all Flex headers, work from the center out, avoiding placment of rigid milo guard bars over the flex joints in the header On every OTHER Tyne BOOTS

Guard JDF-010 WND-105 Guard JDF-010 WND-105 For OptimumPart # C-Clasp H-5 Clip Part # C-Clasp H-5 Clip Performance

16538 BLACK C H-5 16539 RED C H-5 <--ALL EasyCut Guard systems use the SAME ABM Milo Guard setup16540 GREY C H-5 Use C-Clasp for 3/8", 8mm or 10mm bolt

For every C-Clasp installed, replace one 10mm Carriage bolt with a 3/8" or 10mm Hex bolt of the same length, install with NUT UP

HoneyBee Headers with EITHER 87112 or 87113 HoneyBee Guards, typically used on AirFlex headersHoneyBee Grain Belt and 4000-series headers use complete Schumacher EasyCut SCH guards and sickles, use the SCH-charts above Total Kit

Cut size # of FG-087 # of FG-077 # of H-5 Clips # of C-2 Clasps Wt. Retail Price Grain Saver Retail Price Price includingSet # (Width ft) 8-points 7-points P/N WND-105 P/N K11-001 Lbs. w/o GS boots Boots Required GS-boots GS-Boots

HB-230AF-122 30 10 6 32 32 88 $1,155.99 61 $383.43 $1,539.42HB-236AF-146 36 6 14 40 40 103 $1,406.27 73 $458.86 $1,865.13HB-240AF-162 40 15 6 42 42 119 $1,528.40 81 $509.15 $2,037.55HB-245AF-182 45 14 10 48 48 139 $1,728.02 91 $572.00 $2,300.03HB-250AF-202 50 20 6 52 52 148 $1,900.81 101 $634.86 $2,535.67

Part Number KEY: HB-230AF = HoneyBee 30 foot Air Flex, -122 = 122 exposed guard points ↑ ALWAYS For all Flex headers, work from the center out, avoiding placment of rigid milo guard bars over the flex joints in the header One ABM-2005 INCLUDE

Guard K11-001 WND-105 Guard K11-001 WND-105 Grain Saver Boot GRAIN SAVERPart # C-2 Clasp H-5 Clip Part # C-2 Clasp H-5 Clip On every OTHER Tyne BOOTS 87112 C-2 H-5 87113 C-2 H-5 For Optimum

Use C-2 Clasp for 7/16" or 12mm bolt PerformanceFor every C-2 Clasp installed, replace one 7/16" Carriage bolt with a 7/16" Hex bolt of the same length, install with NUT UP

Schumacher EasyCut www.abm-mfg.com HoneyBee AirFlexHeader system 800-798-1968 Header system

ALWAYS SELL ALWAYS SELL SYSTEMS SYSTEMS

WITH ABM-2005 WITH ABM-2005Grain Saver Grain Saver

Boots on every Boots on everyOTHER point !! 1-Jun-19 OTHER point !!

abm milo guard small parts identification...

Documents