abb s200 series miniature circuit breakers · abb miniature circuit breakers are available with...

14

14System pro M

S200 Series

DescriptionThe S2 Series of miniature circuit breakers offer a compact solution to protection requirements. The S2 devices are current limiting, DIN rail mounted and can offer a good equivalent to fused systems.

The S2 is available with application-specifi c trip characteristics to provide maximum circuit protection. The breakers offer thermal-magnetic trip protection according to B, C, D, K and Z characteristics.

For the worldwide market, the breakers carry UL, CSA, IEC, CE and many other agency approvals and certifi cations.

System pro M compactMiniature circuit breakersS200, S200P, S200U, S200UP

Features• Current limiting

• Fast breaking time (2.5 – 3.5 msec)

• Unique bus connection system

• Wide range of accessories

• Available with variable depth handle

mechanism

• Optional Z curve for SCR protection

• CE certifi ed and marked

• DIN rail or front panel mounting

• Finger safe terminals

• Multi-function terminals

• Suitable for reverse feed

• 480Y/277VAC and 500VDC versions

• UL489 Listed - branch circuit protective device. UL fi le # E212323

• UL1077 Recognized - supplemental protective device. UL fi le # E76126

UL Approved Miniature Molded

Case Circuit B

reakers and

Supplemental Protectors

Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: [email protected]

14

14System pro M

S200 Series

14.2 Low Voltage Products & Systems

General informationMiniature circuit breakers (MCBs) are used throughout the world in all types of electrical installations. ABB MCBs are approved for use by Underwriters Laboratories in systems rated up to 600VAC/VDC. Devices are also certifi ed per CSA.

MCBs are approved per IEC-898 and VDE 0641, and certifi ed under IEC-947 and VDE 0660 standards for use in systems rated up to 690VAC.

MCBs can be applied to 16 2/3Hz – 400Hz and DC power systems.

Special direct current version MCBs include a permanent magnet for DC fault current interruption. These "UC" versions are rated 250/500VDC under UL1077/CSA 22.2 No. 235.

Continuous current ratings are as low as 0.2 amperes and up to 125 amperes maximum.

MCBs are of compact size and can be quickly mounted on standard 35mm DIN rail or can be front mounted by use of a front mounting kit.

MCBs include line and load side terminals for conductors from 18 through 4AWG (0.75 – 25mm2) for 63 amperes.

MCBs can also be connected via busbar conductors which can be either upper or lower mounted for top feed or bottom feed. Dual function terminals allow busbars to be connected with main incoming line conductors without separate lugs.

AccessoriesAuxiliary devices can be added to the, S200 series MCBs: • Shunt trips • Auxiliary contacts • Bell alarm contacts • Aux/bell alarm contacts • Undervoltage release

Accessory device modules can be fi eld mounted to all above listed ABB MCBs. Auxiliary contacts are also available for the S500 series MCB.

ApplicationsMCBs can be used for equipment protection, in commercial appliances, protection of control circuits against overcurrent faults, computer equipment and other computer peripheral devices.

UL 489S200U and S200UP MCBs are listed as molded case circuit breakers for use as branch circuit protective devices. Miniature MCCBs and accessories are listed under UL fi le E212323.

UL 1077S200 and S200P MCBs are recognized as supplementary protectors and are intended for use as overcurrent protection within an appliance or other electrical equipment where branch circuit overcurrent protection is already provided or not required. MCBs and accessories are recognized under UL File E76126.

CSA C22.2MCBs and accessories are certifi ed under CSA C22.2 No. 235 per File LR98793.

Tripping characteristicsTime-current curvesABB miniature circuit breakers are available with different trip characteristics, allowing for maximum system protection.

B CharacteristicAvailable with the S200 and S500 series has rated currents of 6 through 63 amperes in 10 steps. The "B" time-current curve is designed primarily for use in cable protection applications. Instantaneous tripping occurs between approximately 3 to 5 times rated current in 50/60Hz systems. This quick trip curve maximizes protection of control circuits under low short circuit fault levels that could damage control wiring.

C CharacteristicAvailable in the S200 and S500 series with rated currents up through 63 amperes and the S290 series with rated currents of 80, 100 and 125 amperes. The "C" time-current curve is designed for medium magnetic start-up currents. Instantaneous tripping occurs between 5 and 10 times rated current in 50/60 Hz systems.

D CharacteristicThe new magnetic trip action has an instantaneous trip between 10 and 20 times the breaker rating. Thus, the S200 and S500-D can be a good protective solution for applications involving high in-rush transformers, motors and other high inductive systems. It is also suitable for any application where a high instantaneous trip point is desired.

K CharacteristicThe "K" time-current characteristic considers high magnetic start-up currents from motors, transformers and other equipment. Instantaneous tripping occurs between 8 and 12 times rated current in 50/60Hz systems. The "K" characteristic is available up through 63 amperes.

The "K" curve offers the best protection for the broadest range of electrical systems. The higher magnetic trip settings maximizes protection while allowing for higher in-rush currents during system start-up. Available in S200P, S200U, S200UP and S500.

Z CharacteristicAlso available up through 63 amperes, the "Z" characteristic offers instantaneous tripping between 2 and 3 times rated current in 50/60Hz systems. This trip characteristic is available in the S200P, S200U and S200UP series with both the 480Y/277VAC and 250/500VDC ratings.

Many applications require a very low short circuit trip setting in order to protect semiconductor or other sensitive devices and the "Z" trip characteristic may provide maximum protection and service in these applications.

General information


14

14System pro M

S200 Series

Low Voltage Products & Systems 14.3

General informationInterruption ratings Trip characteristics overview

Trip characteristics overview

Curve Magnetic Thermal Series characteristic 1 characteristic

1 All values are relative to MCB's ampere rating.

Interruption ratings

120 VAC 10kA 0.5 - 63A S200-B,C,D 0.5 - 63A S200-K 0.2 - 63A S200P-K, Z 0.2 - 63A S200U-K, Z 0.2 - 25A S200UP-K, Z

18kA 32 - 63A S500-B,C,D 26 - 45A S500-K

30kA 6 - 25A S500-B,C,D 0.15 - 25A S500-K

240 VAC 6kA 0.5 - 63A S200-B,C,D Single pole 0.5 - 63A S200-K Single pole

10kA 0.5 - 63A S200-B,C,D Multi pole 0.5 - 63A S200-K Multi pole 0.2 - 63A S200P-K,Z Single pole 0.2 - 63A S200P-K,Z Multi pole 0.2 - 63A S200U-K,Z Single pole 0.2 - 63A S200U-K,Z Multi pole 0.2 - 25A S200UP-K,Z Single pole 0.2 - 25A S200UP-K,Z Multi pole

18kA 32 - 63A S500-B,C,D 26 - 45A S500-K

30kA 6 - 25A S500-B,C,D 0.15 - 25A S500-K

277 VAC 6kA 0.5 - 63A S200-B,C,D 0.5 - 63A S200-K

10KA 0.2 - 63A S200P-K,Z 0.2 - 25A S200UP-K,Z

480Y/277 VAC 6kA 0.5 - 63A S200-B,C,D 0.5 - 63A S200-K

10KA 0.2 - 63A S200P-K,Z 0.2 - 25A S200UP-K,Z

60 VDC 10kA 0.5 - 63A S200-B,C,D Single pole 0.5 - 63A S200-K Single pole

125 VDC 10kA 0.5 - 63A S200-B,C,D Multi pole 0.5 - 63A S200-K Multi pole 0.2 - 63A S280UC-K,Z Single pole

250 VDC 4.5kA 0.2 - 63A S280UC-K,Z Single pole

500 VDC 4.5kA 0.2 - 63A S280UC-K,Z Multi pole

B 3 - 5X 1.13 1.45X S200, S500 C 5 - 10X 1.13 1.45X S200, S290, S500 D 10 - 20X 1.13 1.45X S200, S500 K 8 - 12X 1.05 1.20X S200, S500 Z 2 - 3X 1.05 1.20X S200

Voltage Rated interrupting Rated MCB Comment capacity current type


14

14System pro M

S200 Series


General informationTripping curves

0.01

0.1

10

100

1000

10,000

1

1 2 3 5 10 20 30

B

0.05

0.5

50

500

5000

5

DC

AC

7

seco

nds

multiple of rated current

1 2 3 5 10 20 30

C

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

AC

18

seco

nds


1 2 3 5 10 20 30

D

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

AC

seco

nds


1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

K

seco

nds


128

Z

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

seco

nds


UC-Z

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

seco

nds


1 2 3 5 10 20 30

UC-K

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

seco

nds



14

14System pro M

S200 Series

General informationConstruction details

Space for identifi cation marker

Tripping lever

Operator

Operating mechanism

Electro-magnetic protection

Thermal protection-bimetal

Upper terminal

Fixed contact

Moving contact

Lower terminal

DIN rail holder

Arc chamber


14

14System pro M

S200 Series

UL 1077 CSA C22.2 No. 235VDE 0641 IEC-898Cable protectionB

S201-B, 1 pole

S202-B, 2 poleS201-BNA, 1 P+N

S203-B, 3 pole

S204-B, 4 poleS203-BNA, 3P+N

S200480Y/277 VACSupplemental protectors

Discount schedule CB5

Delivery Class

A - Standard item, stock to 2 weeks lead timeB - Stock to 4 weeks lead timeC - 6 to 8 week lead time

1 pole 6 S201-B6 $ 36 10 S201-B10 36 13 S201-B13 36 16 S201-B16 36 20 S201-B20 38 A 10 4.5 25 S201-B25 38 32 S201-B32 40 40 S201-B40 42 50 S201-B50 48 63 S201-B63 56

1 pole + neutral 6 S201-B6NA 62 10 S201-B10NA 62 13 S201-B13NA 62 16 S201-B16NA 62 20 S201-B20NA 68 B 5 9.0 25 S201-B25NA 72 32 S201-B32NA 74 40 S201-B40NA 76 50 S201-B50NA 90 63 S201-B63NA 102

2 pole 6 S202-B6 78 10 S202-B10 78 13 S202-B13 78 16 S202-B16 78 20 S202-B20 86 A 5 9.0 25 S202-B25 88 32 S202-B32 94 40 S202-B40 98 50 S202-B50 112 63 S202-B63 128

3 pole 6 S203-B6 $ 118 10 S203-B10 118 13 S203-B13 118 16 S203-B16 118 20 S203-B20 130 A 1 13.5 25 S203-B25 132 32 S203-B32 142 40 S203-B40 148 50 S203-B50 170 63 S203-B63 194

3 pole + neutral 6 S203-B6NA 142 10 S203-B10NA 142 13 S203-B13NA 142 16 S203-B16NA 142 20 S203-B20NA 162 B 1 18.0 25 S203-B25NA 168 32 S203-B32NA 176 40 S203-B40NA 184 50 S203-B50NA 212 63 S203-B63NA 240

4 pole 6 S204-B6 156 10 S204-B10 156 13 S204-B13 156 16 S204-B16 156 20 S204-B20 172 B 1 18.0 25 S204-B25 176 32 S204-B32 188 40 S204-B40 196 50 S204-B50 224 63 S204-B63 256

Rated Catalog List Delivery Sugg. Wgt. oz. current number price class order (1 pc.) qty


0.01

0.1

10

100

1000

10,000

1

1 2 3 5 10 20 30

B

0.05

0.5

50

500

5000

5

DC

AC

7

seco

nds



14

14System pro M

S200 Series


C UL 1077 CSA C22.2 - NO. 235VDE 0641 IEC-898Cable & equipment protection




S201-C, 1 pole

S202-C, 2 poleS201-CNA, 1P+N

S203-C, 3 pole

S204-C, 4 poleS203-CNA, 3P+N

1 pole 0.5 S201-C0.5 $ 42 1 S201-C1 42 1.6 S201-C1.6 42 2 S201-C2 42 3 S201-C3 42 4 S201-C4 42 6 S201-C6 42 8 S201-C8 42 10 S201-C10 42 A 10 4.5 13 S201-C13 42 16 S201-C16 42 20 S201-C20 42 25 S201-C25 46 32 S201-C32 48 40 S201-C40 52 50 S201-C50 60 63 S201-C63 68

1 pole + neutral 0.5 S201-C0.5NA 84 1 S201-C1NA 84 1.6 S201-C1.6NA 84 2 S201-C2NA 84 3 S201-C3NA 84 4 S201-C4NA 84 6 S201-C6NA 84 8 S201-C8NA 84 B 5 9.0 10 S201-C10NA 84 13 S201-C13NA 84 16 S201-C16NA 84 20 S201-C20NA 84 25 S201-C25NA 88 32 S201-C32NA 90 40 S201-C40NA 96 50 S201-C50NA 112 63 S201-C63NA 130

2 pole 0.5 S202-C0.5 96 1 S202-C1 96 1.6 S202-C1.6 96 2 S202-C2 96 3 S202-C3 96 4 S202-C4 96 6 S202-C6 96 8 S202-C8 96 A 5 9.0 10 S202-C10 96 13 S202-C13 96 16 S202-C16 96 20 S202-C20 96 25 S202-C25 106 32 S202-C32 106 40 S202-C40 116 50 S202-C50 136 63 S202-C63 152

3 pole 0.5 S203-C0.5 $ 138 1 S203-C1 138 1.6 S203-C1.6 138 2 S203-C2 138 3 S203-C3 138 4 S203-C4 138 6 S203-C6 138 8 S203-C8 138 10 S203-C10 138 A 1 13.5 13 S203-C13 138 16 S203-C16 138 20 S203-C20 138 25 S203-C25 156 32 S203-C32 158 40 S203-C40 174 50 S203-C50 200 63 S203-C63 228

3 pole + neutral 0.5 S203-C0.5NA 200 1 S203-C1NA 200 1.6 S203-C1.6NA 200 2 S203-C2NA 200 3 S203-C3NA 200 4 S203-C4NA 200 6 S203-C6NA 200 8 S203-C8NA 200 B 1 18.0 10 S203-C10NA 200 13 S203-C13NA 200 16 S203-C16NA 200 20 S203-C20NA 200 25 S203-C25NA 206 32 S203-C32NA 212 40 S203-C40NA 224 50 S203-C50NA 204 63 S203-C63NA 304

4 pole 0.5 S204-C0.5 218 1 S204-C1 218 1.6 S204-C1.6 218 2 S204-C2 218 3 S204-C3 218 4 S204-C4 218 6 S204-C6 218 8 S204-C8 218 B 1 18.0 10 S204-C10 218 13 S204-C13 218 16 S204-C16 218 20 S204-C20 218 25 S204-C25 234 32 S204-C32 238 40 S204-C40 260 50 S204-C50 300 63 S204-C63 338

Delivery Class


1 2 3 5 10 20 30

C

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

AC

18

seco

nds



14

14System pro M

S200 Series S200

480Y/277 VACSupplemental protectors

D UL 1077 CSA C22.2VDE 0641 IEC-898Cable & equipment protection


S201-D, 1 pole

S202-D, 2 pole

S203-D, 3 pole



1 pole 0.5 S201-D0.5 $ 42 1 S201-D1 42 1.6 S201-D1.6 42 2 S201-D2 42 3 S201-D3 42 4 S201-D4 42 6 S201-D6 42 8 S201-D8 42 10 S201-D10 42 A 10 4.5 13 S201-D13 42 16 S201-D16 42 20 S201-D20 42 25 S201-D25 46 32 S201-D32 48 40 S201-D40 52 50 S201-D50 60 63 S201-D63 68

2 pole 0.5 S202-D0.5 96 1 S202-D1 96 1.6 S202-D1.6 96 2 S202-D2 96 3 S202-D3 96 4 S202-D4 96 6 S202-D6 96 8 S202-D8 96 A 5 9.0 10 S202-D10 96 13 S202-D13 96 16 S202-D16 96 20 S202-D20 96 25 S202-D25 106 32 S202-D32 106 40 S202-D40 116 50 S202-D50 136 63 S202-D63 152

3 pole 0.5 S203-D0.5 $ 138 1 S203-D1 138 1.6 S203-D1.6 138 2 S203-D2 138 3 S203-D3 138 4 S203-D4 138 6 S203-D6 138 8 S203-D8 138 A 1 13.5 10 S203-D10 138 13 S203-D13 138 16 S203-D16 138 20 S203-D20 138 25 S203-D25 156 32 S203-D32 158 40 S203-D40 174 50 S203-D50 200 63 S203-D63 228

1 2 3 5 10 20 30

D

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

AC

seco

nds



14

14System pro M

S200 Series


K UL 1077 CSA C22.2 - NO. 235VDE 0641 IEC-898Cable & equipment protection


S202-K, 2 poleS201-KNA, 1P+N

S201-K, 1 pole


S203-K, 3 pole

S204-K, 4 poleS203-KNA, 3P+N


1 pole 0.5 S201-K0.5 $ 42 1 S201-K1 42 1.6 S201-K1.6 42 2 S201-K2 42 3 S201-K3 42 4 S201-K4 42 5 S201-K5 42 6 S201-K6 42 8 S201-K8 42 10 S201-K10 42 13 S201-K13 42 A 10 4.5 15 S201-K15 42 16 S201-K16 42 20 S201-K20 42 25 S201-K25 46 30 S201-K30 48 32 S201-K32 48 40 S201-K40 52 50 S201-K50 60 60 S201-K60 68 63 S201-K63 68

1 pole + neutral 0.5 S201-K0.5NA 84 1 S201-K1NA 84 1.6 S201-K1.6NA 84 2 S201-K2NA 84 3 S201-K3NA 84 4 S201-K4NA 84 6 S201-K6NA 84 8 S201-K8NA 84 10 S201-K10NA 84 B 5 9.0 13 S201-K13NA 84 16 S201-K16NA 84 20 S201-K20NA 84 25 S201-K25NA 88 32 S201-K32NA 90 40 S201-K40NA 96 50 S201-K50NA 112 63 S201-K63NA 130

2 pole 0.5 S202-K0.5 96 1 S202-K1 96 1.6 S202-K1.6 96 2 S202-K2 96 3 S202-K3 96 4 S202-K4 96 5 S202-K5 96 6 S202-K6 96 8 S202-K8 96 10 S202-K10 96 A 5 9.0 13 S202-K13 96 15 S202-K15 96 16 S202-K16 96 20 S202-K20 96 25 S202-K25 106 30 S202-K30 106 32 S202-K32 106 40 S202-K40 116 50 S202-K50 136 60 S202-K60 152 63 S202-K63 152

3 pole 0.5 S203-K0.5 $ 138 1 S203-K1 138 1.6 S203-K1.6 138 2 S203-K2 138 3 S203-K3 138 4 S203-K4 138 5 S203-K5 138 6 S203-K6 138 8 S203-K8 138 10 S203-K10 138 13 S203-K13 138 A 1 13.5 15 S203-K15 138 16 S203-K16 138 20 S203-K20 138 25 S203-K25 156 30 S203-K30 158 32 S203-K32 158 40 S203-K40 174 50 S203-K50 200 60 S203-K60 228 63 S203-K63 228

3 pole + neutral 0.5 S203-K0.5NA 200 1 S203-K1NA 200 1.6 S203-K1.6NA 200 2 S203-K2NA 200 3 S203-K3NA 200 4 S203-K4NA 200 6 S203-K6NA 200 8 S203-K8NA 200 10 S203-K10NA 200 B 1 18.0 13 S203-K13NA 200 16 S203-K16NA 200 20 S203-K20NA 200 25 S203-K25NA 206 32 S203-K32NA 212 40 S203-K40NA 224 50 S203-K50NA 264 63 S203-K63NA 304

4 pole 0.5 S204-K0.5 218 1 S204-K1 218 1.6 S204-K1.6 218 2 S204-K2 218 3 S204-K3 218 4 S204-K4 218 6 S204-K6 218 8 S204-K8 218 B 1 18.0 10 S204-K10 218 13 S204-K13 218 16 S204-K16 218 20 S204-K20 218 25 S204-K25 234 32 S204-K32 238 40 S204-K40 260 50 S204-K50 300 63 S204-K63 338

Delivery Class


1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

K

seco

nds


128


14

14System pro M

S200 Series S200P

480Y/277 VACSupplemental protectors

K UL 1077 CSA C22.2 - NO. 235VDE 0660 Cable & equipment protection

S201P-K, 1 pole

S202P-K, 2 pole

S203P-K, 3 pole


Delivery Class


1 pole 0.2 S201P-K0.2 $ 54 0.3 S201P-K0.3 54 0.5 S201P-K0.5 54 0.75 S201P-K0.75 54 1 S201P-K1 54 1.6 S201P-K1.6 54 2 S201P-K2 54 3 S201P-K3 54 4 S201P-K4 54 6 S201P-K6 54 8 S201P-K8 54 A 10 4.6 10 S201P-K10 54 13 S201P-K13 54 16 S201P-K16 54 20 S201P-K20 54 25 S201P-K25 56 32 S201P-K32 58 40 S201P-K40 64 50 S201P-K50 70 63 S201P-K63 80

2 pole 0.2 S202P-K0.2 128 0.3 S202P-K0.3 128 0.5 S202P-K0.5 128 0.75 S202P-K0.75 128 1 S202P-K1 128 1.6 S202P-K1.6 128 2 S202P-K2 128 3 S202P-K3 128 4 S202P-K4 128 6 S202P-K6 128 A 5 9.2 8 S202P-K8 128 10 S202P-K10 128 13 S202P-K13 128 16 S202P-K16 128 20 S202P-K20 128 25 S202P-K25 130 32 S202P-K32 134 40 S202P-K40 134 50 S202P-K50 162 63 S202P-K63 182

3 pole 0.2 S203P-K0.2 $ 194 0.3 S203P-K0.3 194 0.5 S203P-K0.5 194 0.75 S203P-K0.75 194 1 S203P-K1 194 1.6 S203P-K1.6 194 2 S203P-K2 194 3 S203P-K3 194 4 S203P-K4 194 6 S203P-K6 194 A 1 13.9 8 S203P-K8 194 10 S203P-K10 194 13 S203P-K13 194 16 S203P-K16 194 20 S203P-K20 194 25 S203P-K25 196 32 S203P-K32 200 40 S203P-K40 214 50 S203P-K50 246 63 S203P-K63 280



1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

K

seco

nds


128

14


14

14System pro M

S200 Series


3 pole 0.2 S283-K0.2W $ 194 0.3 S283-K0.3W 194 0.5 S283-K0.5W 194 0.75 S283-K0.75W 194 1 S283-K1W 194 1.6 S283-K1.6W 194 2 S283-K2W 194 3 S283-K3W 194 4 S283-K4W 194 6 S283-K6W 194 B 3 13.9 8 S283-K8W 194 10 S283-K10W 194 13 S283-K13W 194 16 S283-K16W 194 20 S283-K20W 194 25 S283-K25W 196 32 S283-K32W 200 40 S283-K40W 214 50 S283-K50W 246 63 S283-K63W 280

S280 (W)480Y/277 VACSupplemental protectors



S281-KW, 1 pole

S282-KW, 2 pole

S283-KW, 3 pole


Delivery Class


1 pole

0.2 S281-K0.2W $ 54 0.3 S281-K0.3W 54 0.5 S281-K0.5W 54 0.75 S281-K0.75W 54 1 S281-K1W 54 1.6 S281-K1.6W 54 2 S281-K2W 54 3 S281-K3W 54 4 S281-K4W 54 6 S281-K6W 54 8 S281-K8W 54 B 10 4.6 10 S281-K10W 54 13 S281-K13W 54 16 S281-K16W 54 20 S281-K20W 54 25 S281-K25W 56 32 S281-K32W 58 40 S281-K40W 64 50 S281-K50W 70 63 S281-K63W 80

2 pole 0.2 S282-K0.2W 128 0.3 S282-K0.3W 128 0.5 S282-K0.5W 128 0.75 S282-K0.75W 128 1 S282-K1W 128 1.6 S282-K1.6W 128 2 S282-K2W 128 3 S282-K3W 128 4 S282-K4W 128 6 S282-K6W 128 B 5 9.2 8 S282-K8W 128 10 S282-K10W 128 13 S282-K13W 128 16 S282-K16W 128 20 S282-K20W 128 25 S282-K25W 130 32 S282-K32W 134 40 S282-K40W 134 50 S282-K50W 162 63 S282-K63W 182

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

K

seco

nds


128

For use with

ring to

ngue

terminal connectors


14

14System pro M

S200 Series

K UL 1077 VDE 0660CSA 22.2 No. 235Cable and Equipment Protection

S281UC-K, 1 pole

S282UC-K, 2 pole

Direct current applicationsThe S280UC differs from standard miniature circuit breakers in that the UC versions include a permanent magnet which aids in the extinguishing of the arc during medium and high level faults. It is necessary to observe the correct polarity and current direction when connecting the UC breakers. Two examples of correct connection are shown below.

Termination points are marked on all UC type MCBs, points one (1) and four (4) are negative and points two (2) and three (3) are positive. Four pole breakers are also available for voltage reversal applications.

S283UC-K, 3 pole

S280UC500 VDCSupplemental protectors


Delivery Class


1 pole 0.2 S281UC-K0.2 $ 104 0.3 S281UC-K0.3 104 0.5 S281UC-K0.5 104 0.75 S281UC-K0.75 104 1 S281UC-K1 104 1.6 S281UC-K1.6 104 2 S281UC-K2 104 3 S281UC-K3 104 4 S281UC-K4 104 6 S281UC-K6 104 B 10 4.6 8 S281UC-K8 104 10 S281UC-K10 104 16 S281UC-K16 104 20 S281UC-K20 104 25 S281UC-K25 108 32 S281UC-K32 110 40 S281UC-K40 116 50 S281UC-K50 136 63 S281UC-K63 152

2 pole 0.2 S282UC-K0.2 242 0.3 S282UC-K0.3 242 0.5 S282UC-K0.5 242 0.75 S282UC-K0.75 242 1 S282UC-K1 242 1.6 S282UC-K1.6 242 2 S282UC-K2 242 3 S282UC-K3 242 4 S282UC-K4 242 B 5 9.2 6 S282UC-K6 242 8 S282UC-K8 242 10 S282UC-K10 242 16 S282UC-K16 242 20 S282UC-K20 242 25 S282UC-K25 248 32 S282UC-K32 256 40 S282UC-K40 266 50 S282UC-K50 312 63 S282UC-K63 348

3 pole 0.2 S283UC-K0.2 $ 370 0.3 S283UC-K0.3 370 0.5 S283UC-K0.5 370 0.75 S283UC-K0.75 370 1 S283UC-K1 370 1.6 S283UC-K1.6 370 2 S283UC-K2 370 3 S283UC-K3 370 4 S283UC-K4 370 B 3 13.9 6 S283UC-K6 370 8 S283UC-K8 370 10 S283UC-K10 370 16 S283UC-K16 370 20 S283UC-K20 370 25 S283UC-K25 382 32 S283UC-K32 408 40 S283UC-K40 448 50 S283UC-K50 472 63 S283UC-K63 534



L- L+

-1

+2

- +LOAD

3+

4-

1 2 3 5 10 20 30

UC-K

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

seco

nds


L- L+

-1

+2

- +LOAD

L- L+

-1

+2

- +LOAD

3+

4-

Single PoleS281UC

Two PoleS282UC

Maximum voltage between leads

250VDC 500VDC


14

14System pro M

S200 Series

Z UL 1077 VDE 0660CSA 22.2 No. 235Fast trip characteristic

S201P-Z, 1 pole

S202P-Z, 2 pole

S203P-Z, 3 pole

S200P & S280UC480Y/277 VAC & 500 VDCSupplemental protectors


480Y/277 VAC 500 VDC

Delivery Class


1 pole 0.5 S281UC-Z0.5 $ 168 1 S281UC-Z1 168 1.6 S281UC-Z1.6 168 2 S281UC-Z2 168 3 S281UC-Z3 168 4 S281UC-Z4 168 6 S281UC-Z6 168 8 S281UC-Z8 168 10 S281UC-Z10 168 B 10 4.6 16 S281UC-Z16 168 20 S281UC-Z20 168 25 S281UC-Z25 170 32 S281UC-Z32 176 40 S281UC-Z40 188 50 S281UC-Z50 216 63 S281UC-Z63 242

2 pole 0.5 S282UC-Z0.5 390 1 S282UC-Z1 390 1.6 S282UC-Z1.6 390 2 S282UC-Z2 390 3 S282UC-Z3 390 4 S282UC-Z4 390 6 S282UC-Z6 390 8 S282UC-Z8 390 B 5 9.2 10 S282UC-Z10 390 16 S282UC-Z16 390 20 S282UC-Z20 390 25 S282UC-Z25 398 32 S282UC-Z32 410 40 S282UC-Z40 426 50 S282UC-Z50 498 63 S282UC-Z63 558

3 pole 0.5 S283UC-Z0.5 594 1 S283UC-Z1 594 1.6 S283UC-Z1.6 594 2 S283UC-Z2 594 3 S283UC-Z3 594 4 S283UC-Z4 594 6 S283UC-Z6 594 8 S283UC-Z8 594 B 3 13.9 10 S283UC-Z10 594 16 S283UC-Z16 594 20 S283UC-Z20 594 25 S283UC-Z25 603 32 S283UC-Z32 612 40 S283UC-Z40 657 50 S283UC-Z50 756 63 S283UC-Z63 855



1 pole 0.5 S201P-Z0.5 $ 70 1 S201P-Z1 70 1.6 S201P-Z1.6 70 2 S201P-Z2 70 3 S201P-Z3 70 4 S201P-Z4 70 6 S201P-Z6 70 8 S201P-Z8 70 B 10 4.5 10 S201P-Z10 70 16 S201P-Z16 70 20 S201P-Z20 70 25 S201P-Z25 70 32 S201P-Z32 74 40 S201P-Z40 78 50 S201P-Z50 88 63 S201P-Z63 100

2 pole 0.5 S202P-Z0.5 162 1 S202P-Z1 162 1.6 S202P-Z1.6 162 2 S202P-Z2 162 3 S202P-Z3 162 4 S202P-Z4 162 6 S202P-Z6 162 8 S202P-Z8 162 B 5 9.2 10 S202P-Z10 162 16 S202P-Z16 162 20 S202P-Z20 162 25 S202P-Z25 170 32 S202P-Z32 170 40 S202P-Z40 176 50 S202P-Z50 206 63 S202P-Z63 232

3 pole 0.5 S203P-Z0.5 244 1 S203P-Z1 244 1.6 S203P-Z1.6 244 2 S203P-Z2 244 3 S203P-Z3 244 4 S203P-Z4 244 6 S203P-Z6 244 8 S203P-Z8 244 B 1 13.9 10 S203P-Z10 244 16 S203P-Z16 244 20 S203P-Z20 244 25 S203P-Z25 248 32 S203P-Z32 254 40 S203P-Z40 266 50 S203P-Z50 306 63 S203P-Z63 344

UC-Z

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

seco

nds


Z

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

seco

nds



14

14System pro M

S200 Series S200U

240 VACMiniature MCCBs



S201U-K, 1 pole

S202U-K, 2 pole

S203U-K, 3 pole

Delivery Class


1 pole 0.2 S201U-K0.2 $ 54 0.3 S201U-K0.3 54 0.5 S201U-K0.5 54 0.75 S201U-K0.75 54 1 S201U-K1 54 1.6 S201U-K1.6 54 2 S201U-K2 54 3 S201U-K3 54 4 S201U-K4 54 5 S201U-K5 54 6 S201U-K6 54 8 S201U-K8 54 10 S201U-K10 54 A 10 4.6 13 S201U-K13 54 15 S201U-K15 54 16 S201U-K16 54 20 S201U-K20 54 25 S201U-K25 56 30 S201U-K30 58 32 S201U-K32 58 40 S201U-K40 64 50 S201U-K50 70 60 S201U-K60 80 63 S201U-K63 80

2 pole 0.2 S202U-K0.2 128 0.3 S202U-K0.3 128 0.5 S202U-K0.5 128 0.75 S202U-K0.75 128 1 S202U-K1 128 1.6 S202U-K1.6 128 2 S202U-K2 128 3 S202U-K3 128 4 S202U-K4 128 5 S202U-K5 128 6 S202U-K6 128 8 S202U-K8 128 A 5 9.2 10 S202U-K10 128 13 S202U-K13 128 15 S202U-K15 128 16 S202U-K16 128 20 S202U-K20 128 25 S202U-K25 130 30 S202U-K30 134 32 S202U-K32 134 40 S202U-K40 134 50 S202U-K50 162 60 S202U-K60 182 63 S202U-K63 182



S204U-K, 4 pole

UL489 listed as branch

circuit protective device

3 pole

0.2 S203U-K0.2 $ 194 0.3 S203U-K0.3 194 0.5 S203U-K0.5 194 0.75 S203U-K0.75 194 1 S203U-K1 194 1.6 S203U-K1.6 194 2 S203U-K2 194 3 S203U-K3 194 4 S203U-K4 194 5 S203U-K5 194 6 S203U-K6 194 8 S203U-K8 194 10 S203U-K10 194 A 1 13.9 13 S203U-K13 194 15 S203U-K15 194 16 S203U-K16 194 20 S203U-K20 194 25 S203U-K25 196 30 S203U-K30 200 32 S203U-K32 200 40 S203U-K40 214 50 S203U-K50 246 60 S203U-K60 280 63 S203U-K63 280

4 pole 0.2 S204U-K0.2 265 0.3 S204U-K0.3 265 0.5 S204U-K0.5 265 0.75 S204U-K0.75 265 1 S204U-K1 265 1.6 S204U-K1.6 265 2 S204U-K2 265 3 S204U-K3 265 4 S204U-K4 265 5 S204U-K5 265 6 S204U-K6 265 8 S204U-K8 265 10 S204U-K10 265 B 1 18.0 13 S204U-K13 265 15 S204U-K15 265 16 S204U-K16 265 20 S204U-K20 265 25 S204U-K25 275 30 S204U-K30 285 32 S204U-K32 285 40 S204U-K40 314 50 S204U-K50 343 60 S204U-K60 392 63 S204U-K63 392

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

K

seco

nds


128


14

14System pro M

S200 Series


Z UL 489 CSA C22.2 - NO. 5VDE 0660 Cable & equipment protection

S201U-Z, 1 pole

S202U-Z, 2 pole

S203U-Z, 3 pole

S200U240 VACMiniature MCCBs

1 pole 0.5 S201U-Z0.5 70 0.75 S201U-Z0.75 70 1 S201U-Z1 70 1.6 S201U-Z1.6 70 2 S201U-Z2 70 3 S201U-Z3 70 4 S201U-Z4 70 5 S201U-Z5 70 6 S201U-Z6 70 8 S201U-Z8 70 10 S201U-Z10 70 A 10 4.6 15 S201U-Z15 70 16 S201U-Z16 70 20 S201U-Z20 70 25 S201U-Z25 70 30 S201U-Z30 74 32 S201U-Z32 74 40 S201U-Z40 78 50 S201U-Z50 88 60 S201U-Z60 100 63 S201U-Z63 100




Delivery Class





4 pole 0.5 S204U-Z0.5 343 0.75 S204U-Z0.75 343 1 S204U-Z1 343 1.6 S204U-Z1.6 343 2 S204U-Z2 343 3 S204U-Z3 343 4 S204U-Z4 343 5 S204U-Z5 343 6 S204U-Z6 343 8 S204U-Z8 343 10 S204U-Z10 343 B 1 18.0 15 S204U-Z15 343 16 S204U-Z16 343 20 S204U-Z20 343 25 S204U-Z25 343 30 S204U-Z30 363 32 S204U-Z32 363 40 S204U-Z40 382 50 S204U-Z50 431 60 S204U-Z60 490 63 S204U-Z63 490

S204U-Z, 4 pole

Z

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

seco

nds



14

14System pro M

S200 Series S200UP

480Y/277 VACMiniature MCCBs



S201UP-K, 1 pole

S202UP-K, 2 pole

S203UP-K, 3 pole

1 pole 0.2 S201UP-K0.2 $ 90 0.3 S201UP-K0.3 90 0.5 S201UP-K0.5 90 0.75 S201UP-K0.75 90 1 S201UP-K1 90 1.6 S201UP-K1.6 90 2 S201UP-K2 90 3 S201UP-K3 90 4 S201UP-K4 90 5 S201UP-K5 90 6 S201UP-K6 90 8 S201UP-K8 90 A 10 4.6 10 S201UP-K10 90 13 S201UP-K13 90 15 S201UP-K15 90 16 S201UP-K16 90 20 S201UP-K20 90 25 S201UP-K25 90

2 pole 0.2 S202UP-K0.2 210 0.3 S202UP-K0.3 210 0.5 S202UP-K0.5 210 0.75 S202UP-K0.75 210 1 S202UP-K1 210 1.6 S202UP-K1.6 210 2 S202UP-K2 210 3 S202UP-K3 210 4 S202UP-K4 210 5 S202UP-K5 210 6 S202UP-K6 210 A 5 9.2 8 S202UP-K8 210 10 S202UP-K10 210 13 S202UP-K13 210 15 S202UP-K15 210 16 S202UP-K16 210 20 S202UP-K20 210 25 S202UP-K25 210

Delivery Class




S204UP-K, 4 pole



3 pole 0.2 S203UP-K0.2 $ 320 0.3 S203UP-K0.3 320 0.5 S203UP-K0.5 320 0.75 S203UP-K0.75 320 1 S203UP-K1 320 1.6 S203UP-K1.6 320 2 S203UP-K2 320 3 S203UP-K3 320 4 S203UP-K4 320 5 S203UP-K5 320 6 S203UP-K6 320 A 1 13.9 8 S203UP-K8 320 10 S203UP-K10 320 13 S203UP-K13 320 15 S203UP-K15 320 16 S203UP-K16 320 20 S203UP-K20 320 25 S203UP-K25 320

4 pole 0.2 S204UP-K0.2 440 0.3 S204UP-K0.3 440 0.5 S204UP-K0.5 440 0.75 S204UP-K0.75 440 1 S204UP-K1 440 1.6 S204UP-K1.6 440 2 S204UP-K2 440 3 S204UP-K3 440 4 S204UP-K4 440 5 S204UP-K5 440 6 S204UP-K6 440 B 1 18.0 8 S204UP-K8 440 10 S204UP-K10 440 13 S204UP-K13 440 15 S204UP-K15 440 16 S204UP-K16 440 20 S204UP-K20 440 25 S204UP-K25 440

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

K

seco

nds


128


14

14System pro M

S200 Series

S200UP480Y/277 VACMiniature MCCBs


Z UL 489 CSA C22.2 - NO. 5VDE 0660 Cable & equipment protection

S201UP-Z, 1 pole

S202UP-Z, 2 pole

S203UP-Z, 3 pole

1 pole 0.5 S201UP-Z0.5 115 0.75 S201UP-Z0.75 115 1 S201UP-Z1 115 1.6 S201UP-Z1.6 115 2 S201UP-Z2 115 3 S201UP-Z3 115 4 S201UP-Z4 115 5 S201UP-Z5 115 6 S201UP-Z6 115 8 S201UP-Z8 115 A 10 4.6 10 S201UP-Z10 115 15 S201UP-Z15 115 16 S201UP-Z16 115 20 S201UP-Z20 115 25 S201UP-Z25 115

2 pole 0.5 S202UP-Z0.5 270 0.75 S202UP-Z0.75 270 1 S202UP-Z1 270 1.6 S202UP-Z1.6 270 2 S202UP-Z2 270 3 S202UP-Z3 270 4 S202UP-Z4 270 5 S202UP-Z5 270 6 S202UP-Z6 270 A 5 9.2 8 S202UP-Z8 270 10 S202UP-Z10 270 15 S202UP-Z15 270 16 S202UP-Z16 270 20 S202UP-Z20 270 25 S202UP-Z25 270



S204UP-Z, 4 pole



Delivery Class


3 pole

0.5 S203UP-Z0.5 400 0.75 S203UP-Z0.75 400 1 S203UP-Z1 400 1.6 S203UP-Z1.6 400 2 S203UP-Z2 400 3 S203UP-Z3 400 4 S203UP-Z4 400 5 S203UP-Z5 400 6 S203UP-Z6 400 A 1 13.9 8 S203UP-Z8 400 10 S203UP-Z10 400 15 S203UP-Z15 400 16 S203UP-Z16 400 20 S203UP-Z20 400 25 S203UP-Z25 400

4 pole 0.5 S204UP-Z0.5 564 0.75 S204UP-Z0.75 564 1 S204UP-Z1 564 1.6 S204UP-Z1.6 564 2 S204UP-Z2 564 3 S204UP-Z3 564 4 S204UP-Z4 564 5 S204UP-Z5 564 6 S204UP-Z6 564 B 1 18.0 8 S204UP-Z8 564 10 S204UP-Z10 564 15 S204UP-Z15 564 16 S204UP-Z16 564 20 S204UP-Z20 564 25 S204UP-Z25 564

Z

1 2 3 5 10 20 30

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

AC

DC

seco

nds



14

14System pro M

S200 Series


S291-C80

S290-H11

C VDE 0660Cable and equipment protection

S290480Y/277 VAC

480 VAC

Delivery Class


1 2 3 5 10 20 30

C

0.01

0.1

10

100

1000

10,000

1

0.05

0.5

50

500

5000

5

DC

AC

18

seco

nds



1 pole 80 S291-C80 $ 138 100 S291-C100 144 B 6 9.2 125 S291-C125 192

2 pole 80 S292-C80 340 100 S292-C100 364 B 3 18.4 125 S292-C125 568

3 pole 80 S293-C80 536 100 S293-C100 548 B 2 27.6 125 S293-C125 732

4 pole 80 S294-C80 740 100 S294-C100 756 B 1 36.8 125 S294-C125 948

Auxiliary contact S290-H11 72 B 1 1.75

Bell alarm S290-S 112 B 1 1.75

Shunt trip S290-A1 144 B 1 6.2

For fi eld mounting, left side, 110V – 415VAC

S290-A2 144 B 1 6.2For fi eld mounting, left side, 24 – 48VDC


14

14System pro M

S200 Series


AccessoriesBusbars


Delivery Class


NOTE

ALL BUS BARS MAY BE CENTER FED IN ORDER TO DOUBLE THE AMPACITY RATING

NOTE

BUS BARS MAY BE USED ON LINE OR LOADSIDE OF MCBS

Amp Number Busbar End cap Catalog List Delivery Suggested Weight For rating of length catalog number price class order qty. (ozs) use on: poles (mm) number quantity

S200 & 63 60 988 – PS1/60 $ 36 A 9 S200P 1 80 60 988 – PS1/60/16 46

1 14

S200U & 6 108 – PS1/6/16BP 30 1.4 S200UP 80 12 216 – PS1/12/16BP 60 B 1 2.9 23 18 324 – PS1/18/16BP 90 4.3


S200 & 63 58 1035 PS-ENDSP PS2/58SP $ 122 11 S200P 1 80 58 1035 PS-ENDSP PS2/58/16SP 152 A 1 18

S200U & 6 108 – PS2/6/16BP 40 1.8 S200UP 80 12 216 – PS2/12/16BP 80 B 1 3.7 23 18 324 – PS2/18/16BP 120 5.5


S200 & 63 60 1065 PS-ENDSP PS3/60SP $ 130 A 1

12 S200P 1 80 60 1065 PS-ENDSP PS3/60/16SP 176 20 S200U & 6 108 – PS3/6/16BP 44 2 S200UP 80 12 216 – PS3/12/16BP 88 B 1 4 23 18 324 – PS3/18/16BP 132 6


S200 & B 1 S200P

80 60 1056 PS-END1SP PS4/60/16SP $ 236

22

1 UL Approved for use on UL1077 miniature circuit breakers. UL File #E761262 UL approved for use on UL 489 miniature circuit breakers. UL File # E2501453 UL 489 bus bars may not be cut.


14

14System pro M

S200 Series

L1

L1

L1L2

L1L2

L3

L1

L1

L2 L1 L2 L1 L2....

L2 L3 L1 L2 L3....

L1 L1....

1 Phase with 1 auxiliary

2 Phase with 1 auxillary

3 Phase with 1 auxillary

NOTE

ALL BUS BARS MAY BE CENTER FED IN ORDER TO DOUBLE THE AMPACITY RATING

AccessoriesBusbars


Delivery Class


Insulated busbar assembly contains 4 separate circuits for use with 1+N or 2 pole MCBs.

NOTE

BUS BARS MAY BE USED ON LINE OR LOADSIDE OF MCBS

14


S200 & 63 38 1044 — PS1/38H $ 50 7.4 S200P 80 38 1044 — PS1/38/16H 56

B

1 10.1


S200 & 80 48 1065 PS-ENDSP PS2/48/16SP $ 174 B 1 23.3 S200P


S200 & S200P

80 39 980 PS-ENDSP PS3/39/16SP $ 158 B 1 22.6


S200 & S200P

80 58 1048 PS-END1SP PS4/58/16NSP $ 238 B 1 30.8


14

14System pro M

S200 Series

Accessories

S2C-H6R

S2C-A_


Delivery Class


S2C-S/H6R

S2C-UA_

Electrical For Catalog List Delivery Suggested Wgt. oz. accessories use on: number price class order quantities (1 pc.)

Auxiliary contactsFor fi eld mounting: right side S200 & S2C-H6R Form C 1 NO / 1 NC S200P $ 36 A 1 1.4 S200U S200UP S2C-H6RU The auxiliary contacts will signal whether the breaker is in the ON or OFF position. The contacts are rated 2A/277 VAC and 1.5A/125 VDC. Minimum operating voltage is 24 VAC/VDC. Wire size: 18 AWG to 16 AWG.

Bell alarm S200 &

S2C-S/H6R

S200P A 1 1.4For fi eld mounting, right side 48

S200U S2C-S6RU S200UP

The bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically the contacts would be connected to an alarm or bell to signal the operator that an overcurrent trip has occured. The bell alarm also includes a test button for testing the alarm contacts without opening the breaker. The contact is rated 2A/277 VAC and 1.5A/125 VDC. Minimum operating voltage is 24 VAC/VDC.

* Combination bell alarm/auxiliary contact

Shunt trip S200 & S2C-A1For fi eld mounting, right side S200P S2C-A2 A1: 12-60 VAC (12-60VDC) 138 A 1 5.2 A2: 110-415 VAC (110-250 VDC) S200U & S2C-A1U S200UP S2C-A2UFor remote tripping of breaker, a shunt trip device can be added to the MCB. The solenoid device opens the breaker after control voltage is applied. Shunt trips are available for on control system voltage (12-415 VAC/VDC).

Undervoltage releaseFor fi eld mounting, right side 12 VDC S2C-UA12 24 VAC/VDC S2C-UA24 48 VAC/VDC S200 & S2C-UA48 216 A 1 5.2 110 VAC/VDC S200P S2C-UA110 220 VAC/VDC S2C-UA230 415 VAC S2C-UA400 When control voltage drops below approximately 50% of rated voltage, the UVR opens the breaker. The breaker can not be operated unless proper control voltage is fi rst applied to the UVR coil. Similar in size and mounting to the shunt trip accessory.

Factory mountingAll accessories may be easily mounted in the fi eld. For factory mounting of any accessory devices, add $30 list to total price per breaker. To create complete catalog number, take suffi x of accessory device following “S2C-” and add suffi x to end of breaker part number. Multiple suffi xes must be added in alphabetical order.Example: S202-K20A1 $ 264 (2 pole, 20A breaker with type A1 shunt trip) S202-K20 @ $96 + S2C-A1 @ $138 + factory mounting @ $30 = $264 S202-K20A2H6R $ 300 (2 pole, 20A breaker with type A2 shunt trip and H6R aux. contacts) S202- K20 @ $96 + S2C-A1 @ $138 + S2C-H6R @ $36 + factory mounting @ $30 = $300

Auxiliary contacts and shunt trips may be mounted in combination.


14

14System pro M

S200 Series Accessories

S200

SA1

SA2

MB-3PD

MB-CL

S500-ME2

Delivery Class


12404

SMR-39

S2C-DH

Electrical Catalog List Delivery Suggested Wgt. oz. accessories number price class order quantities (1 pc.)

Front mounting kit For 2 poles S500-ME1 $ 60 2.1 For 2 – 5 poles S500-ME2 70 A 1 2.9 For 2 – 10 poles S500-ME3 80 3.6 Optional rear terminals S500-K1 16 1.5Includes fl ange, mounting rail and hardware.

Front mounting clip For 1 – 4 poles MB-CL 35 A 1 2Simple mounting clip for up to four module mounting.

Front mounting bracket For 1 – 3 poles MB-3PD 35 A 1 2.5For fl ush mounting of three pole MCBs: includes hardware.

Locking device Adaptor only SA1 9 A 10 0.7 Padlock only w/ 2 keys SA2 19 0.1Allows breaker to be locked in ON or OFF position.

Labeling accessory1 sheet = 40 blank labels BS 741 sheet = 40 numbered labels BS1/40 74

A 1 —

Adhesive labels mount on front face of components.

Enclosure, IP40 For 2 modules 12402 32 2.0 For 4 modules 12404 45 B 1 2.8 For 6 modules 12406 56 3.4 For 8 modules 12408 66 4.1

For additional protection against accidental contact. Includes integrated mounting rail.

Enclosure, IP55 For 4 modules 12644 84 8.1 For 6 modules 12646 98 A 1 10.8 For 10 modules 12650 126 20.4 For 20 modules 12652 210 41.0Molded plastic complete with mounting rail and knock-outs for cable entries.

Blanking plates Single pole (set of 10) BP-1P 6 A 1 — Twelve pole (snap-off, set of 1) BP-12P 7 — — —

Handle mechanism S2C-DH 76 A 1 9.2For use with 2, 3 and 4 pole S2 MCBs and disconnect switch handles with 5mm shaft.

DIN rail Universal mounting SMR-39 21 A 1 835mm DIN rails are available in 39-inch strips (1 meter).


14

14System pro M

S200 Series

AccessoriesS200


Delivery Class


SZ-BSK

SZ-ESK2

SZ-AST55_

SZ-AST50_

Catalog List Delivery Suggested Weight Description number price class order qty. ounce qty. (2 pc.)

Busbar end caps 2 & 3 phase PS-ENDSP $ 2 A 10 — 4 phase PS-END1SP

Busbar tooth covers SZ-BSK 4 A 10 — (shrouds unused portion of busbar)

Busbar mounted terminal block, 1 pole, for use on all busbars. SZ-ESK2 10 A 1 1.0 Wire size: 14 AWG to 2 AWG

Item

Catalog List Delivery Suggested Wgt. oz. number price class order quantities (1 pc.)

Busbar accessories

Electrical accessories

Catalog List Delivery Suggested Weight Description For use on number price class order qty. ounce qty. (2 pc.)

Ring tongue terminal S200 & S200P SZ-AST55UPRT $ 5 A 10 0.5 S200U & S200UP

Plug S2C-P N/C A 10 —

Factory mounting

Ring tongue connection terminals may be easily mounted in the fi eld. For factory mounting, add $5 list per connector. To create a complete catalog number, add the suffi x as defi ned below:

Top & bottom: S201 - K20W $ 62 (Single pole, 20A breaker with 2 ring tongue terminals) S201-K20 @ $42 + SZ-AST55UPRT times 2 @ $5 + factory mounting times 2 @ $5 = $62

Bottom only: S201 - K20BW $ 52 (Single pole, 20A breaker with 1 ring tongue terminal) S201-K20 @ $42 + SZ-AST55UPRT @ $5 + factory mounting @ $5 = $52

Top only, S201 - K20TW $ 52 (Single pole, 20A breaker with 1 ring tongue terminal) S201-K20 @ $42 + SZ-AST55UPRT @ $5 + factory mounting @ $5 = $52

Ring tongue accessories

Posidrive tools Screwdriver, #1 SD-PZ1 $ 40 A 1 4 Screwdriver, #2 SD-PZ2 40 A 1 4 Bit, #1 BIT-PZ1 4 A 1 4 Bit, #2 BIT-PZ2 4 A 1 4

Connection terminals Cross section For Catalog List Delivery Suggested Wgt. oz. AWG/mm2 use on: number price class order quantities (1 pc.)

1/0 (50mm2) Straight S200 & S200P SZ-AST55I $ 15 10 0.5 1/0 (50mm2) 90° SZ-AST50I 15

B 10 0.5

1/0 (50mm2) Straight S200U & S200UP SZ-AST55U 15 10 0.5 1/0 (50mm2) 90° SZ-AST50U 15

B 10 0.5


14

14System pro M

S200 Series

MountingUniversal mounting position using snap-on mounting to standard 35x7.5mm DIN rail.

Miniature circuit breakers (MCBs) can also be mount ed to front of door using a panel cut-out with breaker handle pro trud ing through panel opening for external operation. Special front mount ing kit page 23.

ConnectionTerminals are suitable for solid or fl exible conductors from 18 to 4 AWG (0.75 to 25mm2) with no busbar connected. When max i mum busbar size of 36 mm2 is used, maximum cable is 6 AWG (16 mm2).

Maximum tightening torque of 17.5 in-lb (2 Nm) for line/load terminals and 4.5 in-lb (0.5Nm) for ac ces so ry device terminals.

OperationMCBs are switched on by moving the handle to the upper po si tion. Stamped onto the handle switch, a “I” is visible confi rming that the breaker is closed.

The MCBs are “trip-free,” if the handle is being forced to the “ON” position, the breaker will still trip under fault conditions.

The “O” marking indicates that the breaker is in the “OFF” position. The MCB is now open and the load is disconnected from line power.

When a breaker has tripped, the MCB handle should fi rst be set to the full “OFF” position to make certain the trip mechanism has been reset. Once the fault has been determined and cleared the MCB can again be switched “ON”.

MaintenanceABB miniature circuit breakers require no special maintenance; only normal electrical system maintenance pro ce dures are required.

Removing MCB

Mounting MCB

Technical dataMounting and operating instructions

Possible mounting arrangements of MCB accessories

+ST+S/H+S/H (H)+S/H (H)

S 200

+H+H+H

+S/H+S/H (H)+S/H (H)

+ST+H+H+H

+UR+H+H+H

+UR+S/H+S/H (H)+S/H (H)

Legend

Auxiliary contact H

Bell alarm/Auxiliary contact S/H

Bell alarm/Auxiliary contactused as auxiliary contact S/H (H)

Shunt trip ST

Undervoltage release UR


14

14System pro M

S200 Series


Top and bottom terminals may be bussed together with single phase or multi-phase busbars as shown. Both line and load side terminals can be bus bar connected.

Top and bottom dual function terminals provided in open position for connection to busbars or cable.

Terminals allow for connection of cable 18-4 AWG [top row] and 18-8 AWG [bottom row].

Two slots per terminal offer the ability to connect, independently, two conductors. This may be cables or bus bar.

Easy removal of devices from an assembly when using bus bar in the bottom, load side terminals.

Conductors may only be inserted into open terminals, preventing mis-wiring and potential problems.

Technical dataBusbars & connectorsConnection methods

14


14

14System pro M

S200 Series

Approvals: UL 1077 1077 1077 1077 CSA C22.2 — No.235 C22.2 — No. 235 C22.2 — No. 235 — VDE 0641, 0660 0660 0660 0660 IEC 898, 947 898, 947 898, 947 898, 947

No. of poles: 1,2,3,4 1+N,3+N 1,2,3, 1+N,3+N 1,2,3,4, 1+N,3+N 1,2,3,4,1+N,3+N

Tripping characteristic: B C,D K K

Rated currents: 6 to 63A 0.5 to 63A 0.5 to 63A 0.2 to 63A

Minimum operating voltage: 12V 12V 12V 12V

UL/CSA rated voltage & Single pole Multi pole Single pole Multi pole Single pole Multi pole Single pole Multi poleinterrupting capacity 120VAC 10kA — 10kA — 10kA — 10kA —

240VAC 6kA 10kA 6kA 10kA 6kA 10kA 10kA 10kA

277VAC 6kA — 6kA — 6kA — 10kA —

277/480 VAC — 6kA — 6kA — 6kA — 10kA

60VDC 10kA 10kA 10kA 10kA 10kA 10kA — —

125VDC — 10kA — 10kA — 10kA — — Frequency: 50/60Hz (See below) 50/60Hz (see below) 50/60Hz (see below) 50/60Hz (see below)

Rated voltage IEC single pole 240/415VAC 240/415VAC 240/415VAC 240/415VAC 60VDC 60VDC 60VDC 60VDC IEC multi-pole 415VAC 415VAC 415VAC 415VAC 110VDC 110VDC 110VDC 110VDC

Protection category: IP20 IP20 IP20 IP20

Depth of unit per DIN 43880: 68mm 68mm 68mm 68mm

Mounting position: optional optional optional optional

Standard mounting: 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN rail

Main and shunt trip terminals: Wire size 18-4 AWG [top] 18-4 AWG [top] 18-4 AWG [top] 18-4 AWG [top] 18-8 [bottom] 18-8 [bottom] 18-8 [bottom] 18-8 [bottom] Torque 17.5 in-lbs. 17.5 in-lbs. 17.5 in-lbs. 17.5 in-lbs. Tool #2 Posidrive #2 Posidrive #2 Posidrive #2 Posidrive

Accessory terminals Wire size 18-16 AWG 18-16 AWG 18-16 AWG 18-16 AWG Torque 4.5 in-lbs. 4.5 in-lbs. 4.5 in-lbs. 4.5 in-lbs. Tool #1 Posidrive #1 Posidrive #1 Posidrive #1 Posidrive

Service life at rated load: In < 32 A, 20,000 operations In < 32 A, 20,000 operations In < 32 A, 20,000 operations In < 32 A, 20,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations

Ambient temperatures: -25°C to +70°C -25°C to +70°C -25°C to +70°C -25°C to +70°CStorage temperatures -40°C to + 70°C -40°C to + 70°C -40°C to + 70°C -40°C to + 70°C

Shock resistance: 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts, shock duration of 13ms shock duration of 13ms shock duration of 13ms shock duration of 13ms

Vibration resistance: 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz @ 0.8 ~ In @ 0.8 ~ In @ 0.8 ~ In @ 0.8 ~ In

Disconnecting neutral rating: 6kA switching 6kA switching 6kA switching —

Technical data

Item S200-B S200-C, -D S200-K S200P-K

Infl uence of frequency on electro-magnetic tripsMagnetic trip values shown on trip curves are valid for 50/60Hz ap pli ca tions. For frequencies other than 50/60Hz, the mag net ic (in stan ta neous) trip values are increased by the factor given below: 16 2/3 - 60Hz 100Hz 200Hz 400Hz DC

Approx. factor 1 1.1 1.2 1.5 1.5

Thermal tripping is independent of frequency.


14

14System pro M

S200 Series


Approx. factor 1 1.1 1.2 1.5 1.5


Technical data

Approvals: UL 1077 1077 1077 — CSA — — — — VDE 0660 0660 0660 0660 IEC 898,947 898, 947 898, 947 898

No. of poles: 1,2,3 1,2,3,4 1,2,3 1,2,3,4

Tripping characteristic: K Z Z C

Rated currents: 0.2 to 63A 0.5 to 63A 0.5 to 63A 80 to 125A


UL/CSA rated voltage & Single pole Multi pole Single pole Multi pole Single pole Multi pole interrupting capacity

120VAC 10kA — 10kA — 10kA — —

240VAC 10kA 10kA 10kA 10kA 10kA 10kA —

277VAC 10kA — 10kA — 10kA — —

277/480 VAC — 4.5kA for 0.2-40A — 10kA — 4.5kA for 0.2-40A — 5kA for 50-63A 5kA for 50-63A 60VDC 10kA 10kA — — 10kA 10kA —

125VDC 10kA 10kA — — 10kA 10kA —

250VDC 4.5kA 4.5kA — — 4.5kA 4.5kA —

500VDC — 4.5kA — — — 4.5kA — Frequency: 50/60Hz (see below) 50/60 Hz (see below) 50/60Hz (see below) 50/60Hz (see below) Rated voltage IEC single pole 240/415VAC 240/415VAC 240/415VAC 230/440VAC 220VDC 60VDC 220VDC 60VDC IEC multi-pole 415VAC 415VAC 415VAC 440VAC 440VDC 110VDC 440VDC 110VDC Protection category: IP20 IP20 IP20 IP20



Standard mounting: 35mm DIN rail 35mm DIN rail 35mm DIN-rail 35mm DIN-rail

Main and shunt trip terminals: Wire size 0.2-40A 18-4 AWG 18-4 AWG [top] 0.5-40A 18-4 AWG 80-125A 14-1/0 AWG 50A & above 18-2 AWG 18-8 AWG [bottom] 18-2 AWG Torque 17.5 in-lbs. 17.5 in-lbs. 17.5 in-lbs. 17.5 in-lbs. Tool #2 Posidrive #2 Posidrive #2 Posidrive #2 Posidrive


Service life at rated load: In < 32 A, 20,000 operations In < 32 A, 20,000 operations In < 32 A, 20,000 operations 10,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations ––



Vibration resistance: 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 60m/s2, at 10 – 150 Hz @ 0.8 ~ In @ 0.8 ~ In @ 0.8 ~ In

Item S280UC-K S200P-Z S280UC-Z S290-C


14

14System pro M

S200 Series


Technical data


Approx. factor 1 1.1 1.2 1.5 1.5


Approvals: UL 489 489 489 489 CSA C22.2 No.5 C22.2 No.5 C22.2 No.5 C22.2 No.5 VDE 0660 0660 0660 0660 IEC 898,947 898, 947 898, 947 898

No. of poles: 1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,4

Tripping characteristic: K Z K Z

Rated currents: 0.2 to 63A 0.2 to 63A 0.2 to 25A 0.2 to 25A


UL/CSA rated voltage & interrupting capacity

120VAC 10kA 10kA 10kA 10kA

240VAC 10kA 10kA 10kA 10kA

277VAC 10kA 10kA

480/277 VAC — — 10kA 10kA Frequency: 50/60Hz (see below) 50/60 Hz (see below) 50/60Hz (see below) 50/60Hz (see below)Rated voltage IEC single pole 240/415VAC 240/415VAC 240/415VAC 240/415VAC 220VDC 60VDC 220VDC 220VDC IEC multi-pole 415VAC 415VAC 415VAC 415VAC 440VDC 110VDC 440VDC 440VDC Protection category: IP20 IP20 IP20 IP20



Standard mounting: 35mm DIN rail 35mm DIN rail 35mm DIN-rail 35mm DIN-rail

Main and shunt trip terminals: Wire size 18-4 AWG [top] 18-4 AWG [top] 18-4 AWG [top] 18-4 AWG [top] 18-8 AWG [bottom] 18-8 AWG [bottom] 18-8 AWG [bottom] 18-8 AWG [bottom] Torque 17.5 in-lbs. 17.5 in-lbs. 17.5 in-lbs. 17.5 in-lbs. Tool #2 Posidrive #2 Posidrive #2 Posidrive #2 Posidrive


Service life at rated load: In < 32 A, 20,000 operations In < 32 A, 20,000 operations In < 32 A, 20,000 operations In < 32 A, 20,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations In > 32 A, 10,000 operations



Vibration resistance: 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz 5g, 20 cycles, 5 Hz, 150 Hz @ 0.8 ~ In @ 0.8 ~ In @ 0.8 ~ In @ 0.8 ~ In

Item S200U-K S200U-Z S200UP-K S200UP-Z


14

14System pro M

S200 Series

Technical dataWire size comparison

1.0 — — 8 — 16 (1.3) 10 — 1.5 — — 12

— 14 (2.1) 15 — 2.5 — — 20 — 12 (3.3) 20 —

4 — — 25 — 10 (5.3) 30 — 6 — — 32

— 8 (8.4) 50 — 10 — — 50 — 6 (13.3) 65 —

16 — — 65 — 4 (21.2) 85 — 25 — — 85

— 3 (26.7) 100 — — 2 (33.6) 115 — 35 — — 115

Ampacities for AWG wire are based on copper cable rated 75° C, except for 16AWG which is based on 60° C wire. Taken from UL508 Table 52.2.

Consult applicable standards for futher detail and information.

mm AWG (mm ) Amps / UL Amps / IEC

Comparison of IEC and AWG wire sizes


14

14System pro M

S200 Series


Approximate dimensionsS200, S200P, S200U, S200UP

S200 & S200P

S290

S200U S200UP

00.0000.00

Inches[Millimeters]

-A1, -A2

Shunttrip

1.0627

2.13 54

3.19 81

0.6917.5

0.359

0.359

1.9750

1.0326

1.7745

Accessories mount to right sideof MCB only

-H

Auxiliaryswitch

-S

Bellalarm


14

14System pro M

S200 Series

C.L.1.7745

2.2657.5

C.L.

0.6917.5

1.3835

2.0752.5

1.7745 D

BKT. MT. HOLES0.25 DIA. TYP 2

CL

CL

3.25

2.12 ( 3P )

1.87

0.74 ( 1P )

1.43 ( 2P )

BREAKER CUT OUT

3.5490

1.38 35

2.07 52.5

1.7745

CL

0.8321

3.2682.5

4.36110.4

0.27 6.9

0.6316

CL

69

45

44

6.8

S 2C-A...S 2C-UA...

85

17.5 69

45

44

6.8

S 2C-H...S 2C-S...S 2C-S/H...

85

8.8

MB-CLFront mounting clip

Approximate dimensionsAccessories

00.0000.00

Inches[Millimeters]

MB-3PDFront mounting bracket

S2C-DHHandle mechanism

Accessoriesmm

mm

in


14

14System pro M

S200 Series


12644

Approximate dimensionsAccessories

12646

12650

12652

12402-12408

00.0000.00

Inches[Millimeters]

4.13105

4.92125

4.92125

7.09180

4.13105

4.92125

6.30160

7.09180

4.13105

4.92125

2309.06

7.09180

9.84250

12.60320

6.09155

5.32135


14

14System pro M

S200 Series

Cross-reference

S260-B S200-B Same pole spacing Same trip char ac ter is tic

S260-C S200-C Same pole spacing Same trip char ac ter is tic

S260-D S200-D Same pole spacing Same trip char ac ter is tic

S270-K S200-K Same pole spacing Same trip char ac ter is tic

S280-K S200P-K Same pole spacing Same trip char ac ter is tic

S280-Z S200P-Z Same pole spacing Same trip char ac ter is tic

S280U-K S200U-K Same pole spacing Same trip char ac ter is tic

S280UX-K S200U-K Smaller pole spacing Same trip char ac ter is tic

Older Suggested Physical Electrical version replacement comparison comparison series

Many older styles of ABB miniature circuit breakers have been replaced by new and improved versions. Many of these newer styles can be directly interchanged, both electrically and physically, with the older version. There are also many international styles of ABB circuit breakers which are not normal stock items and may be inter-changed with stocked ABB versions.


ABB

Contents

1SKC000013C0201

1/1Automation Technologies

MC

Bs

Miniature Circuit Breakers

S230 & S260 Technical Data.............................................................................................................. 1/2 Ordering Details ........................................................................................................... 1/3 Dimension drawings ..................................................................................................... 1/6

High performance main circuit breaker S 700

The S 700 Technology Overview of technical data .......................................................................................... 1/7 Tripping behaviour and characteristics......................................................................... 1/8 Dimension drawings ..................................................................................................... 1/9 Auxiliary switches ......................................................................................................... 1/10

The program Selection table S 700-E................................................................................................ 1/11 Selection table S 700-K................................................................................................ 1/12 Selection table S 700-E with auxiliary switch ............................................................... 1/13 Selection table S 700-K with auxiliary switch ............................................................... 1/14 Selection table S 700 accessories ............................................................................... 1/15

1SKC000013C0201

1/2 Automation Technologies

Standard

TrippingCharacteristics

No. of Poles

Rated Current In

Rated Voltage: Single pole Multipole DC-1 Pole DC-2 Pole

Frequency *

Rated RupturingCapacity 400V a.c.

Mech. Service Life

Degree of Protection

Contact position flagindication

Connection

Mounting

IEC 60898, IEC 60947-2NEMA AB-1

B, C

1,2,3, 1+NA, 3+NA

6-63 A

230/400 V a.c400 V a.c--

50-60 Hz

3kA acc. IEC 60898

20,000

IP20

-

0.75 mm2 - 25 mm2

35mm2 (50A,63A)when no busbar isconected.Combi terminals ontop and bottom

Snap-on fixing onstandard profile railsEN50, 022 or screwfixing on mountingplate

IEC 60898, IEC 60947-2NEMA AB-1

B, C

1,2,3, 1+NA, 3+NA

6-63 A for S260B0.5-63 A for S260C80, 100 A for S280B/C

230/400 V a.c400 V a.c60 V--125 V--

50-60 Hz

6kA acc. IEC 60898

20,00010,000 (80,100 A)

IP20

-

0.75 mm2 - 25 mm2

with solid or flexibleconductors. Boxteminals on top.Combi terminals on bottom35 mm2 flexible - 35 mm2 rigid for 80,100 A Snap-on fixing onstandard profile railsEN 50, 022 or screwfixing on mountingplate

Specifications S230 S260

*Frequency affects only electromagnetic trips. Other frequencies are also possible with some change in tripping characteristics. Data available in technical catalogues.**Details in technical catalogues. Refer G STO 3113 94 0002.Breaking capacities as per other international standards upon request/available in technical catalogues.

Miniature Circuit BreakersTechnical Data

1SKC000013C0201


MC

Bs

Rated No. of Type Code Ordering Details Packing WeightCurrent A Poles Type No. unit 1pc/kg

Type B acc. to IEC 898, 3 kA

610131620253240506361013162025324050636101316202532405063

1

2

3

S 231 - B 6S 231 - B 10S 231 - B 13S 231 - B 16S 231 - B 20S 231 - B 25S 231 - B 32S 231 - B 40S 231 - B 50S 231 - B 63S 232 - B 6S 232 - B 10S 232 - B 13S 232 - B 16S 232 - B 20S 232 - B 25S 232 - B 32S 232 - B 40S 232 - B 50S 232 - B 63S 233 - B 6S 233 - B 10 S 233 - B 13 S 233 - B 16 S 233 - B 20 S 233 - B 25 S 233 - B 32 S 233 - B 40S 233 - B 50S 233 - B 63

GH S231 1001 R0065GH S231 1001 R0105GH S231 1001 R0135GH S231 1001 R0165GH S231 1001 R0205GH S231 1001 R0255GH S231 1001 R0325GH S231 1001 R0405GH S231 1001 R0505GH S231 1001 R0635GH S232 1001 R0065GH S232 1001 R0105GH S232 1001 R0135GH S232 1001 R0165GH S232 1001 R0205GH S232 1001 R0255GH S232 1001 R0325GH S232 1001 R0405GH S232 1001 R0505GH S232 1001 R0635GH S233 1001 R0065GH S233 1001 R0105 GH S233 1001 R0135 GH S233 1001 R0165 GH S233 1001 R0205 GH S233 1001 R0255 GH S233 1001 R0325 GH S233 1001 R0405GH S233 1001 R0505GH S233 1001 R0635

10

5

3

0.1250.1250.1250.1250.1250.1250.1250.1250.1480.1480.2500.2500.2500.2500.2500.2500.2500.2500.3000.3000.3750.3750.3750.3750.3750.3750.3750.3750.4430.443


Type C acc. to IEC 898, 3 kA

610131620253240506361013162025324050636101316202532405063

1

2

3

S 231 - C 6S 231 - C 10S 231 - C 13S 231 - C 16S 231 - C 20S 231 - C 25S 231 - C 32S 231 - C 40S 231 - C 50S 231 - C 63S 232 - C 6S 232 - C 10S 232 - C 13S 232 - C 16S 232 - C 20S 232 - C 25S 232 - C 32S 232 - C 40S 232 - C 50S 232 - C 63S 233 - C 6S 233 - C 10 S 233 - C 13 S 233 - C 16 S 233 - C 20 S 233 - C 25 S 233 - C 32 S 233 - C 40S 233 - C 50S 233 - C 63


10

5

3

0.1250.1250.1250.1250.1250.1250.1250.1250.1480.1480.2500.2500.2500.2500.2500.2500.2500.2500.3000.3000.3750.3750.3750.3750.3750.3750.3750.3750.4430.443

Miniature Circuit BreakersS 230 RangeOrdering Details

1SKC000013C0201



Type B acc. to IEC 898, 3 kA

610131620253240506380100610131620253240506380100610131620253240506380100

1

2

3

S 261 - B 6S 261 - B 10S 261 - B 13S 261 - B 16S 261 - B 20S 261 - B 25S 261 - B 32S 261 - B 40S 261 - B 50S 261 - B 63S 281 - B 80S 281 - B 100S 262 - B 6S 262 - B 10S 262 - B 13S 262 - B 16S 262 - B 20S 262 - B 25S 262 - B 32S 262 - B 40S 262 - B 50S 262 - B 63S 282 - B 80S 282 - B 100S 263 - B 6S 263 - B 10 S 263 - B 13 S 263 - B 16 S 263 - B 20 S 263 - B 25 S 263 - B 32 S 263 - B 40S 263 - B 50S 263 - B 63S 283 - B 80S 283 - B 100


10

5

3

0.1250.1250.1250.1250.1250.1250.1250.1250.1450.1450.1600.1600.2500.2500.2500.2500.2500.2500.2500.2500.2900.2900.3200.3200.3750.3750.3750.3750.3750.3750.3750.3750.4350.4350.4800.480

Miniature Circuit BreakersS 260 RangeOrdering Details

1SKC000013C0201


MC

Bs

Rated No. of Type Code Ordering Details Packing WeightCurrent A Poles Type No.unit 1pc/kg

Type C acc. to IEC 898, 6 kA

0.511.623468101316202532405063801000.511.623468101316202532405063801000.511.623468101316202532405063801000.511.623468101316202532405063

1

2

3

4

S 261 - C 0.5S 261 - C 1S 261 - C 1.6S 261 - C 2S 261 - C 3S 261 - C 4S 261 - C 6S 261 - C 8S 261 - C 10S 261 - C 13S 261 - C 16S 261 - C 20S 261 - C 25S 261 - C 32S 261 - C 40S 261 - C 50S 261 - C 63S 281 - C 80S 281 - C 100S 262 - C 0.5S 262 - C 1S 262 - C 1.6S 262 - C 2S 262 - C 3S 262 - C 4S 262 - C 6S 262 - C 8S 262 - C 10S 262 - C 13S 262 - C 16S 262 - C 20S 262 - C 25S 262 - C 32S 262 - C 40S 262 - C 50S 262 - C 63S 282 - C 80S 282 - C 100S 263 - C 0.5S 263 - C 1S 263 - C 1.6S 263 - C 2S 263 - C 3S 263 - C 4S 263 - C 6S 263 - C 8S 263 - C 10S 263 - C 13S 263 - C 16S 263 - C 20S 263 - C 25S 263 - C 32S 263 - C 40S 263 - C 50S 263 - C 63S 283 - C 80S 283 - C 100S 264 - C 0.5S 264 - C 1S 264 - C 1.6S 264 - C 2S 264 - C 3S 264 - C 4S 264 - C 6S 264 - C 8S 264 - C 10S 264 - C 13S 264 - C 16S 264 - C 20S 264 - C 25S 264 - C 32S 264 - C 40S 264 - C 50S 264 - C 63

GH S261 1001 R0984GH S261 1001 R0014GH S261 1001 R0974GH S261 1001 R0024GH S261 1001 R0034GH S261 1001 R0044GH S261 1001 R0064GH S261 1001 R0084GH S261 1001 R0104GH S261 1001 R0134GH S261 1001 R0164GH S261 1001 R0204GH S261 1001 R0254GH S261 1001 R0324GH S261 1001 R0404GH S261 1001 R0504GH S261 1001 R06341117864311178644GH S262 1001 R0984GH S262 1001 R0014GH S262 1001 R0974GH S262 1001 R0024GH S262 1001 R0034GH S262 1001 R0044GH S262 1001 R0064GH S262 1001 R0084GH S262 1001 R0104GH S262 1001 R0134GH S262 1001 R0164GH S262 1001 R0204GH S262 1001 R0254GH S262 1001 R0324GH S262 1001 R0404GH S262 1001 R0504GH S262 1001 R06341117864911178650GH S263 1001 R0984GH S263 1001 R0014GH S263 1001 R0974GH S263 1001 R0024GH S263 1001 R0034GH S263 1001 R0044GH S263 1001 R0064GH S263 1001 R0084GH S263 1001 R0104GH S263 1001 R0134GH S263 1001 R0164GH S263 1001 R0204GH S263 1001 R0254GH S263 1001 R0324GH S263 1001 R0404GH S263 1001 R0504GH S263 1001 R06341117865511178656GH S264 1001 R0984GH S264 1001 R0014GH S264 1001 R0974GH S264 1001 R0024GH S264 1001 R0034GH S264 1001 R0044GH S264 1001 R0064GH S264 1001 R0084GH S264 1001 R0104GH S264 1001 R0134GH S264 1001 R0164GH S264 1001 R0204GH S264 1001 R0254GH S264 1001 R0324GH S264 1001 R0404GH S264 1001 R0504GH S264 1001 R0634

10

5

3

2

0.1250.1250.1250.1250.1250.1250.1250.1250.1250.1250.1250.1250.1250.1250.1250.1450.1450.1600.1600.2500.2500.2500.2500.2500.2500.2500.2500.2500.2500.2500.2500.2500.2500.2500.2900.2900.3200.3200.3750.3750.3750.3750.3750.3750.3750.3750.3750.3750.3750.3750.3750.3750.3750.4350.4350.4800.4800.5000.5000.5000.5000.5000.5000.5000.5000.5000.5000.5000.5000.5000.5000.5000.5800.580

Miniature Circuit BreakersS 260 RangeOrdering Details (Countinued)

1SKC000013C0201


Miniature Circuit BreakersDimension Details

S230 / S260

1SKC000013C0201


MC

Bs

Technical data

Standard: E DIN VDE 0645

No. of poles: 1, 2, 3, 4

tripping characteristics: E, K

rated current In/Ie: 16 … 125 A (125A released soon)

rated voltage Un/Ue: single-pole 230/400 V AC multipole 400 V ACrated insulation voltage Ui: 690 V~

rated switching capacity Icn: 25 kA, at 230/400 V~frequency: 50 … 60 Hz

insulation co-ordination: – overvoltage category IV – pollution degree 3 – surge withstand capability Uimp 6 kV test voltage when new: 12.3 kV at sea level when used: 9.8 kV at sea level – disconnection functionality yes – power-frequency test voltage 2 kV (50/60 Hz) 1 min degree of protection IP 20, in the distribution board: IP 40(according to DIN VDE 0470):

mounting position: any

fixing: with accessories onto DIN rail EN 60 715, 35 mm or busbars

connection: saddle terminals at top and bottom. Suitable for connecting solid, multi and finely stranded conductors from 2.5 mm 2 to 50 mm 2; multi-stranded up to 70mm 2

storage temperature: Tmax: + 70 °C / + 158 °F, Tmin: – 40 °C / - 40 °F

ambient temperature: Tmax: + 55 °C / +131 °F, Tmin: – 25 °C / -13 °F

shock resistance: 30 g, at least three impacts, shock duration 11 ms

vibration resistance accordingto DIN IEC 68-2-6: 2 g, 20 frequency cycles 5 … 150 … 15 Hz

position indication OFF = green, ON = redaccording to IEC 73:

weight: see selection tables

Contact us for more technical data.

High Performance Main Circuit BreakerS 700® series

1SKC000013C0201


tripping characteristic K 16 to K 50 tripping characteristic K 63 to K 100 (K 125)

SK

017

5 Z

00

SK

017

4 Z

00

Tripping

SK

017

6 Z

00

tripping characteristic E 10 to E 100 (E 125)

tripping rated delayed thermal tripping short-time delay selective tripping

cha rac te ri stic current

non-trip. current tripping current tripping time delayed short-time delay tripping time

tripping tripping

I1 I2 t I3 I4 t

E according to 1.05 x ln ≥ 2 h 5 x ln 0.05s < t < 5s (ln ≤ 32 A)

E DIN VDE 0645 10 to 100 A 0.05s < t < 10s (ln > 32 A)

1.2 x ln < 2 h 6.25 x ln 0.01s < t < 0.3s

K according to 16 to 50 A 1.05 x ln ≥ 2 h 10 x ln 0.05 s < t < 5s (ln ≤ 32 A)

DIN VDE 0660 0.05 s < t < 10s (ln > 32 A)

1.2 x ln < 2 h 14 x ln 0.01 s < t < 0.3s

63 to 100 A 1.05 x ln ≥ 2 h 8 x ln 0.05 s < t < 10s

1.2 x ln < 2 h 12 x ln 0.01 s < t < 0.3s

Tripping characteristic

reference ambient temperature 20 °C / 68° F


1

1 1

1SKC000013C0201


MC

Bs

SK

004

5 Z

02

Dimension drawings (measurements in mm)

S 700

SK

003

9 Z

01

SK

007

8 Z

01

S 700 with auxiliary switch

S 700 with l.v. h.b.c. push-lock terminal S 700 with busbar adaptor

2CD

C 0

22 4

51 F

0003

S 701 S 702 S 703 S 704

S 701 + HS S 702 + HS S 703 + HS S 704 + HS


1SKC000013C0201


AC 14

Ue 400 V 230 V

Ie 2 A 6 A

DC 12

Ue 220 V 110 V

Ie 1 A 1.5 A

DC 13

Ue 60 V 24 V

Ie 2 A 4 A

min. rated voltage UBmin: 24 V p, 24 V ...

min. rated operational current: 5 VA

short-circuit withstand capacity: 230 V~ 1000 A with S 270 K 6

insulation co-ordination:

- overvoltage category: III

- surge voltage: 4 kV (1,2/50 µs)

- pollution degree: 2

connection cross section: up to 2 x 1.5 mm 2

contact stability in vibration testaccording to DIN IEC 68-2-6-: 5 g, 20 frequency cycles 5 … 150 … 5 Hz at 24 V AC/DC, 5 mA automatic reclosing < 10 m

Auxiliary switch S 700 – H.. (2 contact decks)

Auxiliary switch according to DIN VDE 0660 Part 200/7.92

Ith = 10 A

Taking into account operational and environmental conditions according to EN 60 204-1/1997 and EN 60 439-1/1994, the minimum rated operational current for indoor installation is: 24 V AC/DC, 5 mA (AC-12, DC-12)

1

1


1SKC000013C0201


MC

Bs

Selection table

No. of rated order details bbn price price weight pack.poles current 40 12233 1 pc. group 1 pc. unit In /A type code product No. EAN kg pc.

10 S 701-E 10 sel GH S701 5001 R0449 52250 7 0.55 31 16 S 701-E 16 sel GH S701 5001 R0469 52270 5 20 S 701-E 20 sel GH S701 5001 R0489 52290 3 25 S 701-E 25 sel GH S701 5001 R0519 52310 8 32 S 701-E 32 sel GH S701 5001 R0529 52320 7 35 S 701-E 35 sel GH S701 5001 R0539 52340 5 40 S 701-E 40 sel GH S701 5001 R0559 52360 3 50 S 701-E 50 sel GH S701 5001 R0579 52380 1 63 S 701-E 63 sel GH S701 5001 R0599 52400 6 80 S 701-E 80 sel GH S701 5001 R0629 52420 4 100 S 701-E 100 sel GH S701 5001 R0639 52440 2

10 S 702-E 10 sel GH S702 5001 R0449 79380 8 1.10 22 16 S 702-E 16 sel GH S702 5001 R0469 10520 0 1)

20 S 702-E 20 sel GH S702 5001 R0489 94900 7 25 S 702-E 25 sel GH S702 5001 R0519 10400 5 1) 32 S 702-E 32 sel GH S702 5001 R0529 10540 8 1) 35 S 702-E 35 sel GH S702 5001 R0539 10530 9 1) 40 S 702-E 40 sel GH S702 5001 R0559 10550 7 1) 50 S 702-E 50 sel GH S702 5001 R0579 10560 6 1) 63 S 702-E 63 sel GH S702 5001 R0599 05200 9 1) 80 S 702-E 80 sel GH S702 5001 R0629 10960 4 1) 100 S 702-E 100 sel GH S702 5001 R0639 06250 3 1)

16 S 703-E 16 sel GH S703 5001 R0469 86570 3 1.65 13 20 S 703-E 20 sel GH S703 5001 R0489 52630 7 25 S 703-E 25 sel GH S703 5001 R0519 52650 5 32 S 703-E 32 sel GH S703 5001 R0529 52660 4 35 S 703-E 35 sel GH S703 5001 R0539 52680 2 40 S 703-E 40 sel GH S703 5001 R0559 52700 7 50 S 703-E 50 sel GH S703 5001 R0579 52720 5 63 S 703-E 63 sel GH S703 5001 R0599 52740 3 80 S 703-E 80 sel GH S703 5001 R0629 52760 1 100 S 703-E 100 sel GH S703 5001 R0639 52780 9

16 S 704-E 16 sel GH S704 5001 R0469 11060 0 1) 2.20 14 20 S 704-E 20 sel GH S704 5001 R0489 11070 9 1) 25 S 704-E 25 sel GH S704 5001 R0519 10410 4 1) 32 S 704-E 32 sel GH S704 5001 R0529 11080 8 1)

35 S 704-E 35 sel GH S704 5001 R0539 10420 3 1) 40 S 704-E 40 sel GH S704 5001 R0559 11090 7 1) 50 S 704-E 50 sel GH S704 5001 R0579 11100 3 1)

63 S 704-E 63 sel GH S704 5001 R0599 11110 2 1) 80 S 704-E 80 sel GH S704 5001 R0629 11120 1 1) 100 S 704-E 100 sel GH S704 5001 R0639 06260 2 1)

Eselectiveto E DIN VDE 0645

25 000

SK

002

9 B

98

SK

001

1 B

95

SK

000

1 B

95

SK

001

2 B

95

SK

008

3 B

96

SK

007

0 B

96

Use of S 700at the meter mounting board

1) bbn No.: 40 16779

The S 700 high performance main circuit breakers comply with construction size 5, ac cord ing to DIN 43 880, in con nec tion with adap tors for mounting rails S 700 BT 2 and BT 3.They comply with construction size 6 in connection with adaptors for busbars S 700 SA, S 700 SAK and S 700 SA 1


1SKC000013C0201


Selection table

No. of rated order details bbn price price weight pack.poles current 40 12233 1 pc. group 1 pc. unit In /A type code product No. EAN kg pc.

16 S 701-K 16 sel GH S701 5001 R0467 52260 6 0.55 3 20 S 701-K 20 sel GH S701 5001 R0487 52280 4 25 S 701-K 25 sel GH S701 5001 R0517 52300 9 35 S 701-K 35 sel GH S701 5001 R0537 52330 6 40 S 701-K 40 sel GH S701 5001 R0557 52350 4 50 S 701-K 50 sel GH S701 5001 R0577 52370 2 63 S 701-K 63 sel GH S701 5001 R0597 52390 0 80 S 701-K 80 sel GH S701 5001 R0627 52410 5 100 S 701-K 100 sel GH S701 5001 R0637 52430 3

16 S 702-K 16 sel GH S702 5001 R0467 10980 2 1) 1.10 2 20 S 702-K 20 sel GH S702 5001 R0487 10970 3 1) 25 S 702-K 25 sel GH S702 5001 R0517 10990 1 1) 35 S 702-K 35 sel GH S702 5001 R0537 11000 6 1) 40 S 702-K 40 sel GH S702 5001 R0557 11010 5 1) 50 S 702-K 50 sel GH S702 5001 R0577 11020 4 1) 63 S 702-K 63 sel GH S702 5001 R0597 11030 3 1) 80 S 702-K 80 sel GH S702 5001 R0627 11040 2 1) 100 S 702-K 100 sel GH S702 5001 R0637 11050 1 1)

16 S 703-K 16 sel GH S703 5001 R0467 52610 9 1.65 1 3 20 S 703-K 20 sel GH S703 5001 R0487 52620 8 25 S 703-K 25 sel GH S703 5001 R0517 52640 6 35 S 703-K 35 sel GH S703 5001 R0537 52670 3 40 S 703-K 40 sel GH S703 5001 R0557 52690 1 50 S 703-K 50 sel GH S703 5001 R0577 52710 6 63 S 703-K 63 sel GH S703 5001 R0597 52730 4 80 S 703-K 80 sel GH S703 5001 R0627 52750 2 100 S 703-K 100 sel GH S703 5001 R0637 52770 0

16 S 704-K 16 sel GH S704 5001 R0467 11130 0 1) 2.20 1 4 20 S 704-K 20 sel GH S704 5001 R0487 11140 9 1) 25 S 704-K 25 sel GH S704 5001 R0517 11150 8 1) 35 S 704-K 35 sel GH S704 5001 R0537 11160 7 1) 40 S 704-K 40 sel GH S704 5001 R0557 11170 6 1) 50 S 704-K 50 sel GH S704 5001 R0577 96520 5 63 S 704-K 63 sel GH S704 5001 R0597 95550 3 80 S 704-K 80 sel GH S704 5001 R0627 11180 5 1) 100 S 704-K 100 sel GH S704 5001 R0637 11190 4 1)

1

2

SK

013

7 B

00

SK

141

B 0

0

Kselective

25 000

SK

160

B 0

0S

K 1

62 B

00

1) bbn No. 40 16779


1SKC000013C0201


MC

Bs

Selection table S 700 with auxiliary switch

No. of rated order details product No. bbn price price weight pack.poles current 4016779 1 pc. group 1 pc. unit In /A type code EAN D kg pc.

1 10 S 701-E+H2WR 10 GH S701 0316 R0449 45650 0 0.65 3 16 S 701-E+H2WR 16 GH S701 0316 R0469 45660 9 20 S 701-E+H2WR 20 GH S701 0316 R0489 45670 8

25 S 701-E+H2WR 25 GH S701 0316 R0519 45680 7 32 S 701-E+H2WR 32 GH S701 0316 R0529 45690 6 35 S 701-E+H2WR 35 GH S701 0316 R0539 45700 2


80 S 701-E+H2WR 80 GH S701 0316 R0629 45740 8 100 S 701-E+H2WR 100 GH S701 0316 R0639 45750 7

10 S 702-E+H2WR 10 GH S702 0316 R0449 45830 6 1.20 2 16 S 702-E+H2WR 16 GH S702 0316 R0469 45840 5 20 S 702-E+H2WR 20 GH S702 0316 R0489 45850 4












Eselective

25 000

SK

159

B 0

0S

K 0

08 B

01

SK 009 B 01

2

3

4

SK

009

7 B

00


1SKC000013C0201


Selection table S 700 with auxiliary switch

No. of rated order details product No. bbn price price weight pack.poles current 4016779 1 pc. group 1 pc. unit In /A type code EAN D kg pc.

1 16 S 701-K+H2WR 16 GH S701 0316 R0467 45580 0 0.65 3 20 S 701-K+H2WR 20 GH S701 0316 R0487 45590 9 25 S 701-K+H2WR 25 GH S701 0316 R0517 45600 5

35 S 701-K+H2WR 35 GH S701 0316 R0537 45610 4 40 S 701-K+H2WR 40 GH S701 0316 R0557 45620 3 50 S 701-K+H2WR 50 GH S701 0316 R0577 45630 2











Kselective

25 000

SK

159

B 0

0S

K 0

08 B

01

SK 009 B 01

SK

009

7 B

00


1SKC000013C0201


MC

Bs

S 700 SPB 3

S 700 BT 2

S 700 BT 3

SK

014

2 B

00

SK

016

5 B

91

SK

016

6 B

91

S 700 KA 4

SK

016

7 B

91

SK

017

4 B

91

S 700 KA 5

SK

007

2 B

96

S 700 SPA S 700 SPB 1S 700 SPB 2

SK

016

9 B

91

SK

017

0 B

91

SK

007

3 B

96

Selection table accessories

S 700 KA 1

S 700 KA 2/3

The large range of accessories allows for optimum installations for the most various ap pli-ca tions.

Operation prevention cap

Selective Main Circuit BreakerS 700® series

model order details bbn price price weight pack. 40 12233 1 pc. group 1 pc. unit type code product No. EAN kg pc.

Terminal cover to cover terminals within the overall dimensions, has openings (BGV A2) for screwdrivers to con nect cables (2 pieces required for each one pole)

2 pc's./pole required S 700 KA 5 GH S 700 1903 R0005 24300 1 1) 0.003 6

Terminal cover with entries for cables up to 50 mm2. sealable, degree of protection: IP 30 (2 pieces required for each one pole)

2 pc's./pole required S 700 KA 4 GH S 700 1913 R0001 52140 1 0.015 6

to cover terminals and cutouts at meter mounting boards with 125 mm rail-to-rail clear ance


to cover terminals and cutouts at meter mounting boards with 112.5 mm rail-to-rail clear ance


Terminal coversto cover terminals within the overall dimensions (2 pieces required for each one pole)


Switch-off prevention cap

for 1-pole devices S 700 SPA GH S 700 1905 R0001 52060 2 0.001 10

Mounting board for selective main circuit breakers for fixing onto two mounting rails 35 mm according to DIN EN 50 022 (adjustable to distances of 112.5 and 125 mm respectively)

required forS 701: 1 pc. S 700 BT 2 GH S 700 1902 R0002 52040 4 0.07 10S 703: 2 pc's.

Mounting board for selective main circuit breakers for optional fixing onto one or two mounting rails 35 mm according to DIN EN 50 022 (rail-to-rail clearance 125 mm in the case of two mounting rails)

required forS 701: 1 pc. S 700 BT 3 GH S 700 1902 R0003 28440 0 1) 10S 703: 2 pc's.

Operation prevention cap for optional locking with utility company key and/or padlock/screw

transparent S 700 SPB 3 GH S 700 1918 R0001 28450 9 1) 0.012 31) bbb No.: 40 16779

transparent S 700 SPB 1 GH S 700 1906 R0001 52070 1 0.002 10grey S 700 SPB 2 GH S 700 1906 R0002 52080 0 0.002 10

1SKC000013C0201


S 700 SA

SK

006

5 B

96

S 700 SAK

S 700 SA 1

S 701 with l.v. h.b.c.push lock terminalS 700-NH 00

SK

007

4 B

96

SK

145

B 0

0

SK

154

B 0

0

SKL-N6

S 700 SPE SK 0079 Z 94

SK

156

B 0

2

S 700 SA 1 GH S 700 1917 R0001 25430 4 1) 0.105 1

L.v. h.b.c. push-lock terminal connecting a single-pole high performance main circuit breaker S 701 to a size 00 n l.v. h.b.c. fuse holder 1 set includes 2 l.v. h.b.c. push-lock terminals and 2 terminal covers with integrated l.v. h.b.c. puller lug.

Busbar terminals for Cu 12 x 5

1) bbn No.: 40 16779 2) bbn No.: 40 13614

Label carrier with protection cap and labels 1 package = 50 label holders, 50 transparent covers, 60 non-adhesive and 75 self-adhesive labels

Selection table accessories

Terminal cover with integrated NH puller lug

Busbar adaptor with terminals 50 mm2 for incoming supply (for 3 S 701 or 1 S 703)

Busbar adaptorBusbar adaptor (for 3 S 701 or 1 S 703)rail-to-rail clearance 40 mm, Cu number 0.230

Selective Main Circuit BreakerS 700® series

Busbar adaptor single-polerail-to-rail clearance 40 mm, adjustable for connection to L1 or L2 or L3, CU number 0.230

required for S 7011 set = 2 pc's. S 700-NH 00 GH S 700 1911 R0001 52120 3 0.05 1 set

lead cross sectionup to 10 mm2 SKL-N6 GH L290 1200 R0006 00450 3 1) 1

BA 50 FP TN47 2625 R0001 01498 7 2) 1pack

Lock preventing unauthorized switching, hasp diameter 3 mm

for 3-pole devices S 700 SPE GH S 700 1909 R0001 52110 4 0.002 10

padlockwith 2 keys SA 2 GJ F110 1903 R0002 58770 4 0.02 10

required for S 701= 2 pc's. S 700-AB 00 GH S 700 1912 R0001 52130 2 0.008 2 pc's.

S 700 SAK GH S 700 1103 R0001 52020 6 0.65 1

S 700 SA GH S 700 1102 R0001 52000 8 0.35 1

model order details bbn price price weight pack. 40 12233 1 pc. group 1 pc. unit type code product No. EAN kg pc.

1SKC000013C0201


MC

Bs

Notes

abb s200 series miniature circuit breakers · abb miniature circuit breakers are available with...

Documents