abaqus i - cued: www2 amb2/abaqus/abappt fileweb view2009-10-20abaqus cae abaqus abaqus viewer cae...

Download ABAQUS I - CUED: www2 amb2/abaqus/ABAPPT fileWeb view2009-10-20ABAQUS CAE ABAQUS ABAQUS Viewer cae inp log dat msg odb ps ... 1_Default Design ABAQUS I ABAQUS 6.9 Slide 3 Slide 4 Element

Post on 26-Mar-2018

218 views

Category:

Documents

3 download

Embed Size (px)

TRANSCRIPT

  • ABAQUS I

    Summary

    Program CapabilityComponents of an ABAQUS ModelElements, Materials and ProceduresModules (analysis, pre and post processing)Input File Outline, ExampleBasic Pre and Post ProcessingCommands to run ABAQUSDocumentation & On-line Resources

  • ABAQUS 6.9

    Static (linear and non-linear)Dynamics (Implicit, Explicit)Heat TransferTime Dependent (Transient, Steady State)Vibration, Frequency, BucklingSoil ConsolidationCoupled Displacement- Electrical

  • Element type Names

    B21 : Beam, 2-D, 1st order InterpolationC3D20: Continuum, 3-D, 20-noded solid element

    S8R : Shell, 8-node, Reduced Integration

  • Element Type Names

    CPE8 : Continuum Plane Strain 8 nodedCPS8 : Continuum Plane Stress 8 noded

  • PROCEDURES

    BUCKLECOUPLED TEMPERATURE-DISPLACEMENT (steady state and transient)DYNAMICFREQUENCY GEOSTATICHEAT TRANSFER (Steady state and transient)SOILS CONSOLIDATIONSOILS STEADY STATESTATIC

  • ABAQUS CAE

    ABAQUS

    ABAQUS

    Viewer

    cae

    inp

    log

    dat

    msg

    odb

    ps

    ascii

    database

    Message file

    Output database

    Printed output

    Postscript Output

    + Other formats

    inp

    Pre

    Processing

    Analysis

    Post

    Processing

    Represents files which are identified by the extension name

  • Outline of the Model Data : Any line starting withr an asterisk (*) I a key word. Any lin startimg with ** is a commnty line and if ignored by ABAQUS.The firtdt keyword is the Heading.

  • (steady state and transient)

    Local Coordinate

    System

  • Units

    What units does ABAQUS use? ABAQUS has no inherent set of units.How do I set the units in ABAQUS? You cannot.

    It is the Users responsibility to use a consistent set of units.Choose the units for Length and ForceIf the analysis is time dependent then select the unit for Time.

    Example : Length m Structural : Force - N Analysis : Time - Sec

    Then the units for all the other quantities are derived from it.

    Modulus, stress PascalsDensity - kg/m3

  • Example : Cantilever - Plate

  • ABAQUS Explicit Example

  • Blocks Falling

  • Consolidation Analysis

  • Hydrocephalus

  • Effect of fault movement on pipe

  • Effect of fault movement on pipe

  • FAULT MOVEMENT ON PIPE

  • FAULT MOVEMENT ON PIPE

    Outline of the Model Data : Any line starting withr an asterisk (*) I a key word. Any lin startimg with ** is a commnty line and if ignored by ABAQUS.The firtdt keyword is the Heading.

Recommended

View more >