aavblister liquid cold plates - mb electronic · aavid thermalloy aavblister liquid cold plates are...

FOR MORE INFORMATION, VISIT OUR WEB SITE: WWW.AAVIDTHERMALLOY.COM

AAVBLISTER LIQUID COLD PLATES FOR POWER APPLICATIONS

Aavid Thermalloy AavBlister liquid cold plates aredesigned for customers seeking a cost effective high vol-ume solution for challenging power density applications.AavBlister plates increase the surface area in contact withthe cooling fluid by using fin structures in the flow paththereby increasing thermal transfer performance. Unlikemilled base plate designs, AavBlister cold plates allowdevice mounting holes to be placed anywhere in the baseplate without risk of interference with coolant channels.

CRITICAL APPLICATION NEED:

• Cost/performance value

• Leak free operation

• Thermal performance

FEATURES AND BENEFITS:

• Blister design makes the solution suitable for high volume cost sensitive applications

• Brazed construction results in a rugged leak free solution

• Blister design puts a large area of fluid in contact withthe base plate resulting in more uniform heat transfer

AavBlisterLiquid Cold Plates

ORDERING INFORMATION:

Part Number Finish Figure

409932 Unfinished 1

Custom Configurations: See Figure 4 for design guidelines.Contact Aavid Thermalloy Application Engineering for assistance.

RoHS �Compliant

Figure 1

MECHANICAL OUTLINE:


Blister Tube Liquid Cold Plates

RoHS �Compliant

7.0

15.0

150.0 0.5

310.0 0.5

70.0

27.2

34.0 1.0

SPECIFICATIONS:

• Plate: Extrusion, aluminum 6060-T5

• Cover Plate: Aluminium 1050A

• Standard Fittings: 3/8 inch gas female fitting

• Inlet and outlet: Top side

• Joints: Brazed

• Standard Finish: Sandblast and wash

• Weight: 1.9Kgs

• Maximum operating pressure: 2.5 bar

AVAILABLE OPTIONS:

• Finishes: Contact Applications Engineering

• Fittings: Custom fittings available

• Length/Width: Custom lengths available

Contact Aavid Thermalloy Applications EngineeringDepartment when ordering custom configurations.

Dimensions as shown are mm (inches)


Blister Tube Liquid Cold Plates

RoHS �Compliant

PERFORMANCE:

All LCP parts are 100% leakage and pressure drop tested during production in accordance with European Norm PED 97-23.

• Leakage test with air from 50 to 6000 mbar (6 bar) with ± 0.5% accuracy

• Measurement of flow rate, Pressure Drop and graph construction 0 - 10 bar. Nominal flow max 47 l/min ± 0.5% accuracy

Additionally further tests may be carried out subject to customer requirements as follows;

• Leakage test with air up to 14 bar with ± 0.4% accuracy

• Water tests;

- Stress test 1 - 100 bar (± 0.2% accuracy)

- Static pressure with closed circuit 1 - 100 bar (± 0.2% accuracy)

- Pulsing pressure with closed circuit 1 - 100 bar (± 0.2% accuracy, 1 Hz frequency)

- Pulsing pressure test with open circuit 0.5 - 10 bar (± 0.2% accuracy, 1 Hz frequency)

Performance of 310x150 mm Blister (pure water)

Pressure Drop

Blister with n° 1 162x122mm IGBT

Blister with n° 4 108x62mm IGBT's

0

2

4

6

8

10

12

14

16

18

20

3 4 5 6 7 8 9

Flow rate (l/min)

Rth

(°C

/kW

)

0.0

0.1

0.2

0.3

Pres

sure

dro

p (b

ar)

Note 1. Pure Water is used for testing only

LIQUID COLD PLATE TESTING

310x150mm Blister with1x162x122mm device

310x150mm Blister with 4 x 108x62mm device

162 x 122 108 x 62 108 x 62108 x 62 108 x 62

PLEASE NOTE: Any information furnished by Aavid Thermalloy is believed to be accurate and reliable, but our customers bear all responsibility for use and applications of AavidThermalloy products. AAVID THERMALLOY MAKES NO WARRANTIES EXPRESSED OR IMPLIED, AS TO THE FITNESS, MERCHANTABILITY, OR SUITABILITY OF ANY AAVID THERMALLOYPRODUCTS FOR ANY SPECIFIC OR GENERAL USES. AAVID THERMALLOY SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. All AavidThermalloy products are sold pursuant to the Aavid Thermalloy Domestic Terms and Conditions of Sale in effect from time to time, a copy of which shall be furnished uponrequest (8911A). Copyright © Aavid Thermalloy, LLC. June, 2010. All icons, drawings, illustrations, and trademarks are the property of Aavid Thermalloy, LLC. and may not bereproduced without express written permission. (6/2010)


AavBlisterLiquid Cold Plates

RoHS �Compliant

Asia - India7,Manjusar Gidc, Savli,

Vadodara-391775,

Gujarat, India

Tel: +(91) 2667 264781/82/83

Fax: +(91) 2667 264784

E-Mail:[email protected]

Europe - ItalyViaXXV Aprile, 32

40057 Cadriano (BO), Italy

TEL: (39) 051 764011

FAX: (39) 051 764092

EMAIL: [email protected]

North America70 Commercial Street

Suite 200

Concord, NH 03301

TEL: (603) 224-9988

FAX: (603) 223-1790


Asia - Taiwan14F-4, NO. 79, Hsin Tai Wu RD.

SEC. 1, Hsi Chih

Taipei Hsien

TEL: 011(886) 2–2698–9888

FAX: 011(886) 2–2698–9808


HiContact LCP

AavFin AavFlow LCP

AavTube LCP

OTHER AAVID THERMALLOY LIQUID COOLING PRODUCTS

Asia - ShanghaiBuilding No.1, No.1199 XinFei RD,

SongJiang

Shanghai 201611

Tel: +86-21-6115-2000

Fax: +86-21-6115-2555

E-Mail: [email protected]

FOR MORE INFORMATION, VISIT OUR WEB SITE: WWW.AAVIDTHERMALLOY.COMTEL: (603) 224-9988

TUBE LIQUID COLD PLATES FOR POWER APPLICATIONS

Aavid Thermalloy Tube liquid cold plates are designed for engineers seeking a cost effective solution for low and medium power density applications. Tube cold plates feature a joint free continuous tube mechanicallyinterlocked into a extruded aluminum plate. In addition,a thermal epoxy is applied to the joint to provide a gapfree thermal interface between the plate and the tube for increased performance.






• Economical extruded base and continuous tube construction

• Continuous joint free tube reduces chances for leaks

• Use of thermal epoxy in the joint betweentube and plate enhances thermal performance.

Tube Liquid Cold Plates


Part Number “A" Dim Finish Configuration Figure

418101U00000G 178 mm (7.0") Unfinished 2 Pass 1

418201U00000G 305 mm (12.0 ") Unfinished 2 Pass 1

418301U00000G 610 mm (24.0") Unfinished 2 Pass 1


RoHS �Compliant

SPECIFICATIONS:

• Plate: Extrusion, aluminum

• Tube: Copper 9.5 mm (0.375") O.D. x .8 mm (0.032") wall

• Epoxy: Aluminum filled, high thermal conductivity

• Finish: Unfinished standard

AVAILABLE OPTIONS:

• Finishes: AavSHIELD, AavSHIELD3

• Tube Material: Stainless steel or Cupronickeltubing of the same outside diameter

• Length: Custom lengths available (see Figure 4)


PERFORMANCE:

0.05

0.1 0

0 21 4

- 6 1 0 m m [ - 2 4 " ]

- 3 0 5 m m [ - 1 2 " ]

- 1 7 8 m m [ - 7 " ]1 7 8 m m [ 7 " ]

3 0 5 m m [ 1 2 " ]

6 1 0 m m [ 2 4 " ]

10

207.6 11.3 18.93.8 15. 1

3 5

Water Flow Rate – GPM

Over

all T

herm

al R

esist

ance

°C /W

Mou

ntin

g Su

rface

to In

let W

ater

Pres

sure

Dro

p –

PSI

W a t e r F l o w R a t e L i t e r s / M i n

2 Pass Models

63.5(2.50)

152.4(6.00Dim "A"

38.1(1.50)

17.0(0.69)

6.4(0.25)

38.1(1.50)

127.0(5.00)

1.6(63)

0.025 / 25.4(0.001 / 1.00)

REF

± 1.5± 0.06)

2 Pass Model

Figure 1

MECHANICAL OUTLINE:


Tube Liquid Cold Plates RoHS �Compliant


PLEASE NOTE: Any information furnished by Aavid Thermalloy is believed to be accurate and reliable, but our customers bear all responsibility for use and applications of AavidThermalloy products. AAVID THERMALLOY MAKES NO WARRANTIES EXPRESSED OR IMPLIED, AS TO THE FITNESS, MERCHANTABILITY, OR SUITABILITY OF ANY AAVID THERMALLOYPRODUCTS FOR ANY SPECIFIC OR GENERAL USES. AAVID THERMALLOY SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. All AavidThermalloy products are sold pursuant to the Aavid Thermalloy Domestic Terms and Conditions of Sale in effect from time to time, a copy of which shall be furnished uponrequest (8911A). Copyright © Aavid Thermalloy, LLC. September, 2008. All icons, drawings, illustrations, and trademarks are the property of Aavid Thermalloy, LLC. and may not bereproduced without express written permission. (9/2008)


Asia - Singapore31 Admiralty Road, #06-01

Singapore 739984

TEL: 65 –6362–8388

FAX: 65–6362–8588

Europe - ItalyVia XXV Aprile,32


TEL: (39) 051 764011

FAX: (39) 051 764092



Suite 200

Concord, NH 03301

TEL: (603) 224-9988

FAX: (603) 223-1790



SEC. 1, Hsi Chih

Taipei Hsien

Taiwan

TEL: 011(886) 2–2698–9888

FAX: 011(886) 2–2698–9808

Dim Description Min Max

A Tube to edge 12.0 (0.50)

B Center line of tube radius to plate 3.0 (0.12)

H Flange height 25.4 (1.00) 76.2 (3.00)

L Plate length 25.4 (1.00) 711.2 (28.00)

P Plate thickness 6.4 (0.25) 25.4 (1.00)

R Tube bend radius measured at centerline 2 x Dim D

(Copper only)*

S Tube wall thickness 0.8 (0.032)

D Tubing diameter 6.4 (0.25) 25.4 (1.00)

W Plate width 50.8 (2.00) 307.8 (12.00)

X Tube Extension 24.4 (1.00) 254.0 (10.00)

CUSTOM DESIGN EXAMPLE AND GUIDELINES

* For alternate materials please contact application engineering.

Tube Liquid Cold Plates RoHS �Compliant

Device mounting holes specify location, thread and depth(provide sketch)

"B"

"A"

"L"

"D" and “S”

Specify fittingsFor recommended fitting, see Table 1

"H"

"P"

"W"

0.8(32)

"R"

0.025 / 25.4(0.001 / 1.00)

BarbFemale NPTMale NPTPlain (Standard)

Table 1: Fittings

"S"

± 1.5(± 0.06)

“X”Standard TolerancesLead-in Dimensions ± 0.25 (0.01)Overall Dimensions ± 0.50 (0.02)Feature to Feature ± 0.13 (0.005)


HI-CONTACT TM LIQUID COLD PLATES FOR POWER APPLICATIONS

Aavid Thermalloy Hi-Contact™ liquid cold plates aredesigned for engineers seeking a cost effective solutionfor medium power density applications. Hi-ContactTM

cold plates feature a interlocking groove and tube geometry that improves mechanical robustness and thermal performance over conventional designs.






• Economical extruded base and continuous tube construction

• Continuous joint free tube reduces chances for leaks

• Tube directly contacts the base of the device cooledimproving thermal resistance. Thin epoxy joint betweentube and plate outperforms ‘dry’ joints.

Hi-Contact™ Liquid Cold Plates


Part Number "X" Dim Finish Configuration Figure

416401U00000G N/A Unfinished 2 Pass 1

416501U00000G 152 (6.00) Unfinished 4 Pass 2





Custom Configurations: See Figure 4 for design guidelines. Contact Aavid Thermalloy Application Engineering for assistance.

RoHS �Compliant

SPECIFICATIONS:

• Plate Material: Extrusion, aluminum

• Tube Material: Copper,9.5 mm (0.375") O.D. x 1.24 mm (0.044") wall



AVAILABLE OPTIONS :


• Tube Material: Stainless steel or Cupronickeltubing of the same diameter

• Sizes: Custom sizes available (see Figure 4)

Contact Aavid Thermalloy Applications EngineeringDepartment for assistance with custom configurations


PR

ES

SU

RE

DR

OP

–

PS

I

0 2 3 51 40.00

0.04

0.08

0.12

0.16

0.20 10

2

4

6

8

0

M a x R e c o m m e n d e d F l o w

W a t e r F l o w R a t e – G P M

Over

all

Ther

mal

Res

ista

nce

MTG

.Su

rfac

e to

Inl

et W

ater

– º

C/W

2 Pass Models

PR

ES

SU

RE

DR

OP

–

PS

I

0 2 3 51 40.00

0.01

0.02

0.03

0.04

0.05

305mm (12")

152mm (6")

20

4

8

12

16

0

7.6 11.3 18. 93.8 15. 1

M a x R e c o m m e n d e d F l o wW a t e r F l o w R a t e L i t e r s / M i n

W a t e r F l o w – G P M

Over

all

Ther

mal

Res

ista

nce

MTG

.Su

rfac

e to

Inl

et W

ater

– º

C/W

4 Pass Models

15.2(0.60)

0.025/25.4(0.001/1.00)

17.4(0.69)

1.6(0.63)

28.6(1.13)

57.2(2.25)

28.6(1.13)

25.4(1.00

57.2(2.25)

50.8(2.00

3.2 (0.13)Dia Thru

15.8(0.62

25.4(1.00

ø

± 1.5± 0.06)

± 1.5± 0.06)

± 1.5± 0.06)

± 1.5± 0.06)

2 Pass Model

Figure 1

MECHANICAL OUTLINE:


PR

ES

SU

RE

DR

OP

–

PS

I

0 1.0 1.5 2.50.5 2.0

40

35

30

25

20

15

10

5

0

M a x R e c o m m e n d e d F l o w – 1 . 5 G P M

W a t e r F l o w – G P M

Ov

era

ll T

he

rma

l R

esi

sta

nce

MT

G.

Su

rfa

ce t

o I

nle

t W

ate

r –

ºC

/W

3.0 3.5 4.0

0.016

0.014

0.012

0.010

0.008

0.006

0.004

0.002

0.000

6 “1 2 ”2 4 ”

6 Pass Models

RoHS �Compliant

PERFORMANCE:



17.4(0.685) 1.6

(63)

127.0(5.00)

25.4(1.00)

50.8(2.00

25.4(1.00

25.4(1.00)

76.2(3.00

0.025/25.4(0.001/1.00)

15.2(0.60)

"X"TYPREF

TYP

± 1.5± 0.06)

± 1.5± 0.06)

± 1.5± 0.06)

4 Pass Model

Figure 2

MECHANICAL OUTLINE:

16.1(0.64)

20.1(0.79)

61.0(2.40

90.2(3.55

43.7(1.72

18.0(0.71)

14.0(0.55)

"X"

TYP

TYP

1.6(63)

0.025/25.4(0.001/1.00)

177.8(7.00)

± 1.5± 0.06)

± 1.5± 0.06)

± 1.5± 0.06)

6 Pass Model

Figure 3


RoHS �Compliant


PLEASE NOTE: Any information furnished by Aavid Thermalloy is believed to be accurate and reliable, but our customers bear all responsibility for use and applications of AavidThermalloy products. AAVID THERMALLOY MAKES NO WARRANTIES EXPRESSED OR IMPLIED, AS TO THE FITNESS, MERCHANTABILITY, OR SUITABILITY OF ANY AAVID THERMALLOYPRODUCTS FOR ANY SPECIFIC OR GENERAL USES. AAVID THERMALLOY SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. All AavidThermalloy products are sold pursuant to the Aavid Thermalloy Domestic Terms and Conditions of Sale in effect from time to time, a copy of which shall be furnished uponrequest (8911A). Copyright © Aavid Thermalloy, LLC. April, 2007. All icons, drawings, illustrations, and trademarks are the property of Aavid Thermalloy, LLC. and may not bereproduced without express written permission. (4/2007)


Asia - Singapore31 Admiralty Road, #06-01

Singapore 739984

TEL: 65 –6362–8388

FAX: 65–6362–8588

Europe - ItalyVia Aprile,32


TEL: (39) 051 764011

FAX: (39) 051 764090



Suite 200

Concord, NH 03301

TEL: (603) 224-9988

FAX: (603) 223-1790



SEC. 1, Hsi Chih

Taipei Hsien

Taiwan

TEL: 011(886) 2–2698–9888

FAX: 011(886) 2–2698–9808

"H""L"

"A"

"W"

----

----

"B"

Detail A

1.6(63)

"D" & “S”

"R"

Specify fittingsFor recommendedfitting, see Table 1

Detail A

Alternate constructiontube bend within the confines of the plate Device mounting holes

specify location thread and depth(send sketch)

BarbFemale NPTMale NPTPlain (Standard)

Table 1: Fittings

"X"

0.025/25.4(0.001/1.00)

± 1.5(± 0.06)

Figure 4

MECHANICAL OUTLINE:


A Tube to edge 6.4 (0.25)

B Center line of tube radius to plate 3.0 (0.12)

H Plate thickness 1.7 x Dim D 25.4 (1.00)

L Plate length 25.4 (1.00) 1219.2 (48.00)

R Tube bend radius measured at centerline

(Copper only. For alternate materials

please contact application engineering.)* 2 x Dim D

S Tube wall thickness 1.25 (0.050)

D Tubing diameter 6.4 (0.25) 25.4 (1.00)

W Plate width 38.1 (1.50) 250.4 (10.00)

X Tube extension 25.4 (1.00) 254.0 (10.00)

CUSTOM DESIGN GUIDELINES

* To simplify tooling, a single bend radius dimension is recommended for all tube bends


RoHS �Compliant

Standard TolerancesLead-in Dimensions ± 0.25 (0.01)Overall Dimensions ± 0.50 (0.02)Feature to Feature ± 0.13 (0.005)


AAVTUBE LIQUID COLD PLATES FOR POWER APPLICATIONS

Aavid Thermalloy Aav Tube cold plates feature an innovation on our patented Hi-Contact™ design whichembeds tubes in the base plate to form a mechanicallyrobust cold plate. Extended Surface cold plates increasethe surface area in contact with the cooling fluid by usingflater and more closely spaced tubes in order to increasesurface area thereby increasing thermal transfer perfor-mance. Unlike narrow tube designs, the wide tube putsmore fluid in close contact to the device base plate toincrease thermal transfer.






• Headers provide parallel fluid flow for lower pressure drop

• Hi-Contact tubes put cooling fluid in close contact with the heat load

• Base plate provides mechanical support and area to accommodate device mounting

• Configured to accept a variety of fittings

AavTube Liquid Cold Plates


Part Number “A" Dim Finish Configuration Figure

044586 178 mm (7.0") Unfinished Single Pass 1


RoHS �Compliant

SPECIFICATIONS:

• Plate: Extrusion, aluminum 6063-T5

• Tube: Copper 9.5 mm (0.375") O.D. x .8 mm (0.032") wall



AVAILABLE OPTIONS:


• Tube Material: Stainless steel or Cupronickeltubing of the same outside diameter

• Length: Custom lengths available (see Figure 2)


PERFORMANCE:

0.000

0.005

0.010

0.015

0.020

0.025

2.0 4.0 6.0 8.0 10.0 12.0

Flow Velocity (lpm)

Ther

mal

Res

ista

nce

( C/W

)

0.00

2.00

4.00

6.00

8.00

Pres

sure

dro

p (p

si)

9.00

Pressure drop

Thermal Resistancetube side

Thermal Resistancenon-tube side

270.00(10.630)

192.00(7.559)

10.39(0.409)

142.00(5.591)

150.00(5.906)

404.00(15.906)

12.00(0.472)

4.00(0.157) 11.00

(0.433)

102.51(4.036)

PITCH

Figure 1

MECHANICAL OUTLINE:



RoHS �Compliant


Heat Source Size: 244.5 cm2 (39.71in2)




A Plate Length 75 (2.93) 450 (17.72)

B Plate Width 100 (3.94) 360 (14.17)

C Plate Thickness 8 (0.32) 25 (0.98)

D Tube Pitch 9.5 (0.37) 25 (0.98)

CUSTOM DESIGN EXAMPLE AND GUIDELINES

* For alternate materials please contact application engineering.


RoHS �Compliant

“A”

“B” “D”

“C”


Figure 2

Manifold layout, size,and end terminationsare readilly customized


Vadodara-391775,

Gujarat, India

Tel: +(91) 2667 264781/82/83

Fax: +(91) 2667 264784




TEL: (39) 051 764011

FAX: (39) 051 764090



Suite 200

Concord, NH 03301

TEL: (603) 224-9988

FAX: (603) 223-1790



SEC. 1, Hsi Chih

Taipei Hsien

TEL: 011(886) 2–2698–9888

FAX: 011(886) 2–2698–9808



SongJiang

Shanghai 201611

Tel: +86-21-6115-2000

Fax: +86-21-6115-2555



AAVFLOW ULTRA HIGH PERFORMANCE COLD PLATES FOR POWER APPLICATIONS

Aavid Thermalloy AavFlow cold plates are designed for engineers looking to cool the latest high performance IGBTs. AavFlow plates increase the surface area in contact with the cooling fluid by using unique flow paths thereby increasing thermal transfer performance.The cold plate components are vacuum brazed togetherto form leak free joints. Aavid AavFlow cold plates offersuperior thermal performance with a lower pressure drop than other cold plates resulting in less costly fluidcirculation systems.






• Excellent thermal performance with lower pressure drop than other designs saves on system costs

• Brazed construction results in a rugged leak free solution

• Channels can be configured to put the fluid path where needed for the best thermal performance

AavFlow Liquid Cold Plates



413000U00609G Unfinished 1

Custom Configurations 2Contact Aavid Thermalloy Application Engineering for assistance.

RoHS �Compliant

SPECIFICATIONS:

• Plate: Aluminum

• Cover Plate Material: Aluminum

• Joints: Vacuum Brazed

• Finish: Aavid “wash” Standard

AVAILABLE OPTIONS:

• Finishes: AavSHIELD, AavSHIELD3 , Tin Plate, Electroless Nickel

• Sizes: Custom sizes available see Figure 2 for details


PERFORMANCE:

AavFlow Performance

Flow Rate

Ther

mal

Res

istan

ce (°

C / W

)

876543210

1.0 2.0 3.0 4.0

Pres

sure

Dro

p (P

SI)

0.0080.0070.0060.0050.0040.0030.0020.0010.000

3.78 7.57 15.14

Pressure Drop

Thermal ResistanceSide A

Thermal ResistanceSide B

LPM

GPM

11.36

104.0(4.09)

No drilling permissible indouble cross hatched areas

both sides

Drill depth 14.0 (0.55) in cross hatched area this side (A) only no drilling permissible far side (B)

0.4(16)

0.4(16)

M14 x 1.5 portISO 6149-1

2 PL

0.013/25.0 (0.0005/1)

Side B

Side A

224.0(8.82)

20.5(0.81)

96.0(3.78)

12.3(0.48)

15.0(0.59)2 PL

142.0(5.59)

19.0(0.75)

2.3(0.91)

6.35(0.25)

2 X

Figure 1

MECHANICAL OUTLINE:



RoHS �Compliant

Heat source size: 244.5cm2 (37.91in2)


No drilling permissible in double cross hatched areas both sides.

Drill depth T-5.0 (0.20) in cross hatched area this side (A) only. No drilling permissible far side (B).0.013/25.0 (0.0005/1)

“L”

“W”

“C”

“A”

“T”

“P” + 1.0 (0.40)

“P”

0.4(16)

0.4(16)

ISO to BarbISO to Male NPTISO to Flare

Table 1: Available Adapters

“B”

Side B

Side A

Device mounting holesspecify location, depth, thread.

Figure 2

CUSTOM DESIGN GUIDELINES:


RoHS �Compliant


DIM Description Min Max

A Center line, port to port 25 (0.98) “W” - (“P” + 2.0 (0.08))

B Edge to port 1/2 “P” + 5.0 (0.2) (W-A)/2

C Mounting surface to centerline of port 1/2 “P” + 1.0 (0.04) “H” - (1/2 “P” + 5.0 (0.20))

T Plate thickness 14 (0.55) 50 (1.97)

L Plate length 150 (5.91) 700 (27.56)

P Port size and thread (metric, pipe, oring) M8 (1/8NPT) “T” -5.0 (0.20)

W Plate width 75 (2.95) 400 (15.75)

Dimensions as shown are mm (inches) Standard TolerancesLead-in Dimensions ± 0.25 (0.01)Overall Dimensions ± 0.50 (0.02)Feature to Feature ± 0.13 (0.005)




RoHS �Compliant

The Max Clip SystemTM

Extrusion Selection Guide Capability Brochure

Standard Board Level Heat Sinks


Vadodara-391775,

Gujarat, India

Tel: +(91) 2667 264781/82/83

Fax: +(91) 2667 264784




TEL: (39) 051 764011

FAX: (39) 051 764092



Suite 200

Concord, NH 03301

TEL: (603) 224-9988

FAX: (603) 223-1790



SEC. 1, Hsi Chih

Taipei Hsien

TEL: 011(886) 2–2698–9888

FAX: 011(886) 2–2698–9808



SongJiang

Shanghai 201611

Tel: +86-21-6115-2000

Fax: +86-21-6115-2555



AAVFIN LIQUID COLD PLATES FOR POWER APPLICATIONS

Aavid Thermalloy AavFin liquid cold plates are designed for engineers seeking a cost effective high volume solution for challenging power density applications. AavFin plates increase the surface area in contact with the cooling fluid by using fin structures in the flow path thereby increasing thermal transfer performance. Aavfin cold plates offer industry leadingthermal performance.






• Channel design makes the solution suitable for high volume cost sensitive applications

• Vacuum brazed construction results in a rugged leak free solution

• Passage design puts a large area of fluid in contact with the base plate resulting in more uniform heat transfer

AavFin Liquid Cold Plates



413100U20609G Unfinished 1

Custom Configurations 2Contact Aavid Thermalloy Application Engineering for assistance.

RoHS �Compliant

SPECIFICATIONS:

• Plate: Aluminum

• Cover Plate Material: Aluminum

• Joints: Vacuum Brazed

• Finish: Aavid “wash” Standard

AVAILABLE OPTIONS:

• Finishes: AavShield, AavShield3 ,Tin Plate, Electroless Nickel

• Sizes: Custom sizes available see Figure 2 for details


PERFORMANCE:

AavFin Performance

Flow Rate

Ther

mal

Res

istan

ce (°

C / W

)

16141210

86420

1.0 2.0 3.0 4.0

Pres

sure

Dro

p (P

SI)

0.0080.0070.0060.0050.0040.0030.0020.0010.000

3.78 7.57 15.14

Pressure Drop

Thermal ResistanceSide A

Thermal ResistanceSide B

LPM

GPM

11.36

224.0(8.82)

142.0(5.59)

104.0(4.09)

19.0(0.75)

18.1(0.71)

52.0(2.05)

45.0(1.77)

8.4(0.32)

180.0(7.09)

25.0(0.98)

14.0(0.55)2PL

No drilling permissible indouble cross hatched areas, both sides

Drill depth 12.0 (0.47) in cross hatched area this side (A) only no drilling permissible far side (B)

0.4(16) 0.4

(16)

M14 x 1.5 portISO 6149 -1

2PL

0.013/25.0 (0.0005/1)

Side BSide A

Figure 1

MECHANICAL OUTLINE:



RoHS �Compliant

Heat source size: 244.5 cm2 (39.71in2)


“L”

No drilling permissible indouble cross hatched areas, both sides

Drill depth T - 6.0 (0.24) in cross hatched area this side (A) only no drilling permissible far side (B)

0.4(16)

0.4(16)

0.013/25.0 (0.0005/1)

“T”

“C”

“A”

“B”

“F”

“J”

“E” “W”

“G”

“P”

Device mounting holes specify location, thread and depth

Side B

Side A

ISO to BarbISO to Male NPTISO to Flare

Table 1: Available AdaptersFigure 2


RoHS �Compliant



A Center line, port to port 25 (0.98) W-P+2.0 (0.08)

B Edge to port 1/2P+5.0 (0.2) (W-A)/2

C Mounting surface to side “A” centerline of port 1/2P+1.0 (0.04) T-(1/2P+5.0 (0.2))

E Controlled drill zone width W-G W-G

G Edge to controlled drill zone 6.0 (0.24) 150 (5.91)

T Plate thickness 12 (0.47) 50 (1.97)

F No drill zone width 15 (0.59) 30 (1.18)

J Controlled drill zone length L-(F+20 (0.8)) L-(F+10 (0.4))

L Plate length 150 (5.91) 700 (27.56)

P Port size and thread (metric, pipe, oring) M8 (1/8 NPT) T – 5.0 (2.0)

W Plate width 75 (2.95) 400 (15.75)

CUSTOM DESIGN GUIDELINES






RoHS �Compliant

The Max Clip SystemTM

Extrusion Selection Guide Capability Brochure

Standard Board Level Heat Sinks


Vadodara-391775,

Gujarat, India

Tel: +(91) 2667 264781/82/83

Fax: +(91) 2667 264784




TEL: (39) 051 764011

FAX: (39) 051 764092



Suite 200

Concord, NH 03301

TEL: (603) 224-9988

FAX: (603) 223-1790



SEC. 1, Hsi Chih

Taipei Hsien

TEL: 011(886) 2–2698–9888

FAX: 011(886) 2–2698–9808



SongJiang

Shanghai 201611

Tel: +86-21-6115-2000

Fax: +86-21-6115-2555


Working fluids are critical to cold plate performance. While water offers superior

performance it is not always practical due to application operating temperature.

Additives such as Glycol are often required to change the characteristics of water to

better suit the operating environment. In addition, coolants must be compatible with

the cold plate material to reduce the potential for corrosion. The table offers

guidelines for coolant compatibility with Aavid Thermalloy cold plates.

Technology Water Glycol/WaterDe-ionized

WaterOil

Dielectric

Fluids

(i.e

.Flourinert )

Polyalphaolefin

(POA)

Standard

Copper

Tube Cold

Plate

X X X X X X

Stainless

Tube Cold

Plate

X X X X X X

Aluminum

Blister

Cold

Plate

X X X X

Extended

Surface

Copper

AavTube

Cold

Plate

X X X X X X

Aluminum

AavBlisterX X X X

Alum

AavFin

Cold

Plate

X X X X

Fluid Compatibility

Design Assistance

Request a Quote

Request a Sample

Check Distributor Stock

Enter a part number for

pricing and availability.

» Find a Sales Associate

» Find a Distributor

Make a Request

Heat sinks

By product line

Liquid Cold Plates

Tube

Blister

Extended

Technical

Performance

Fluid Compatibility

Quality Control

Customer Assistance

Contact Us

Get Design assistance

Find a Distributor

Find a Sales Rep

Request a Quote

Placing an Order

Terms and Conditions

Returns

Popular Products

Extrusions

Board Level

Liquid Cooling

Heat Pipe Technology

Heat Sink Accessories

Interface Materials

Design Services

Advanced Thermal Engineering

Applications Engineering Support

Product Development

Design Center Locations

Useful Tech Tools

How to Select a Heat Sink

Decipher a Part Number

Performance Factor Table

Flow Velocity Calculator

Our Company

About Aavid

News and Events

Management Team

Worldwide Locations

Directions to Headquarters

Disclaimer

Customer Survey

Privacy Policy

Aavid will lead the electronics thermal management industry worldwide. We will be the first company customers call to enable their thermal designs anywhere in the world. We will respond with extraordinary speed and

will provide them with timely and cost-effective solutions because we understand their needs, their industry, and their culture. 2012 Aavid Thermalloy, LLC

Tel (toll-free): +1-855-32-AAVID

Home Products Solutions Design Tech Tools & Docs Contact Our Company News & Events

Fluid Compatibility - Aavid heatsinks http://www.aavidthermalloy.com/product-group/liquidcoldplates/fluid

1 von 1 18.02.2012 20:38

The graph below compares normalized thermal resistance expresses in C-in2 / W of

Aavid cold plate technologies. The normalization of the data allows designers to

compare thermal performance across technologies without regard to physical size.

Technologies with lower thermal resistance values offer the highest performance in

the application.

Normalized Performance

Application Suitability

Performance Comparison

Design Assistance

Request a Quote

Request a Sample

Check Distributor Stock

Enter a part number for

pricing and availability.

» Find a Sales Associate

» Find a Distributor

Make a Request

Heat sinks

By product line

Liquid Cold Plates

Tube

Blister

Extended

Technical

Performance

Fluid Compatibility

Quality Control

Customer Assistance

Contact Us

Get Design assistance

Find a Distributor

Find a Sales Rep

Request a Quote

Placing an Order

Terms and Conditions

Returns

Popular Products

Extrusions

Board Level

Liquid Cooling

Heat Pipe Technology

Heat Sink Accessories

Interface Materials

Design Services

Advanced Thermal Engineering

Applications Engineering Support

Product Development

Design Center Locations

Useful Tech Tools

How to Select a Heat Sink

Decipher a Part Number

Performance Factor Table

Flow Velocity Calculator

Our Company

About Aavid

News and Events

Management Team

Worldwide Locations

Directions to Headquarters

Disclaimer

Customer Survey

Privacy Policy

Aavid will lead the electronics thermal management industry worldwide. We will be the first company customers call to enable their thermal designs anywhere in the world. We will respond with extraordinary speed and

will provide them with timely and cost-effective solutions because we understand their needs, their industry, and their culture. 2012 Aavid Thermalloy, LLC

Tel (toll-free): +1-855-32-AAVID

Home Products Solutions Design Tech Tools & Docs Contact Our Company News & Events

Performance Comparison - Aavid heatsinks http://www.aavidthermalloy.com/product-group/liquidcoldplates/compa...

1 von 1 18.02.2012 20:37

aavblister liquid cold plates - mb electronic · aavid thermalloy aavblister liquid cold plates are...

Documents