Architainment

LED technology

THE ART OF LIGHTING

66OUTDOOR RATED

A0244012 Indalo Strip-9 RGB 40x12°

The Indalo Strip-9 RGB is a extremely compact and robust exterior lighting fixture, suitable for a wide range of wall-washing and accent lighting applications. The sleek and modern design of this fixture allow for exellent integration into most kinds of archtecture. Used in conjunction with the Indalo Drive-4, the Indalo Strip-9 RGB is an extremely flexible lighting tool.

Technical specifications:LED system: RGB, 3xRed, 3xGreen, 3xBlueOptics: 12°Power consumption: max. 16.5WLumen output: 100% Red 439 Lm 100% Green 212 Lm 100% Blue 46 Lm 100% R+G+B 394 LmPeak intensity: 996cdHousing: Die cast Aluminium, off-white powder coatedProtection: IP66Dimensions: 400 x 45 x 36mmWeight: 0.8kg

Operating Temperature: -40°C / +45°CCooling system: ConvectionInput current: 600mA constant current (also possible at 350mA)Controll system: Powered by Indalo Drive, Stand-alone or DMXDMX-channels: 3

ncluded IP65 3-way serial connector

Attention: This high power LED fixture can not be installed under water

0.866Outdoor

Dimensions in mm

IP20 RJ45connector

cable length: +/- 1.9mtr

4.66m

5.82m

8m

10m

3.5 Lx

4 Lx

4.3 Lx

4.8 Lx

247 Lx0.58m

1.16m

2.33m

3.49m

Height

1m

2m

4m

6m

62 Lx

15 Lx

6.6 Lx

Green

301 Lx

75 Lx

19 Lx

8.1 Lx

RedDiam. 32.5° Indalo Strip-9RGB Blue R+G+B

0.9 Lx

1.1 Lx

66 Lx

16 Lx

4.1 Lx

1.8 Lx

8 Lx

9 Lx

560 Lx

140 Lx

35 Lx

15 Lx

Eavg Eavg Eavg Eavg

425 Lx 519 Lx 113 Lx 964 Lx

Emax Emax Emax Emax

106 Lx 130 Lx 28 Lx 241 Lx

26 Lx 32 Lx 7 Lx 60 Lx

11 Lx 14 Lx 3 Lx 26 Lx

6.6 Lx 8 Lx 1.8 Lx 15 Lx

2.2 Lx 2.7 Lx 0.6 Lx 5 Lx

230V AC

Indalo-Drive-4

Fixture-Line 4

DMX-Controller

IR-remote

or

USE ONLY WITH A 250V FUSE

DMX IN DMX OUT

POWER IN

LINE 1 LINE 3LINE 2 LINE 4

FUSE: T5A

230V AC

Indalo-Drive-4

USE ONLY WITH A 250V FUSE

DMX IN DMX OUT

POWER IN

LINE 1 LINE 3LINE 2 LINE 4

FUSE: T5A

Fixture-Line 3

Fixture-Line 2

Fixture-Line 1

DMX-Line to nextIndalo Drive

Each Indalo Fixture contains 1 piece3-way IP 67 serial RJ45 splitter

Each Indalo-Drive-4 contains 4 pcs2-way IP 67 RJ45 connector

CMR CMXOutdoor 4PR24UTP cable(CAT5E) 2x RJ45

UP

DOWNENTER

MENU 0000

Indalo Drive-4

Indalo wiring diagramA9915022 Indalo-Drive-4The Indalo-Drive-4 is used in conjunction with all Indalo products. The Indalo-Drive-4 provides 4 lines of output with specially engineered drivers allowing for any number of LEDs to be connected with a maximum of 36 LEDs per line. Simple connection with RJ45 connectors (also with available IP67 sleeves) mean that installation is quick-and-simple. Use the Indalo-Drive-4 for connecting the Indalo Fixtures.

Input Voltage: 100-240VAC 50/60HzOutput Lines: 4

• Always disconnect the mains of the LED driver before plugging or unplugging the LED`s !! The LED`s will be damaged or destroyed because of the high voltage present on the driver output when there is no load connected. Connect the main after all Led`s and plugs are connected !

33W 33W

33W16.5W 16.5W

14W

16.5W 16.5W 16.5W 16.5W

14W 14W

A9915035 Play easy DMX-controller

A9915030 Wireless IP67 Transmitterincluded 2x 3mtr. IP67 connection cables

A9915031 Wireless IP67 Receiverincluded 2x 3mtr. IP67 connection cables

DMX-Controlleror

3mtr 3mtr

IP20

3mtr 3mtr

XLR

XLRmale

XLR XLR

IP67 IP67

XLR XLR

IP67 IP67

A9920770Connection cableRJ45 to XLR malecable-length:120cm

AC

IP67

XLR

IP20

RJ45-DMX-Linepin-6: Data +pin-7: Data -pin-8: Gnd

DMX-outto next Vigo drive

XLRfemale

110-240V AC 110-240V AC

L

N

L

N

DMX

Mounting the UTP-cable with RJ45 into the IP66 straight connectorMounting the UTP-cable with RJ45 into the IP66 3-way serial connector Mounting the UTP-cable with RJ45 into the IP66 straight connector

1 2

3

4

5

remove the red caps

10cmIndalo Fixture

slide the red cap away from the RJ45 plug

connect the 3 RJ45 male connectors to the 3 female connectors inside the 2-way connector

Mounting the UTP-cable with RJ45 into the IP66 3-way serial connector

1 2

3

4

5

slide the red cap away from the RJ45 plug

connect the 3 RJ45 male connectors to the 3 female connectors inside the 3-way connector

remove the red caps

10cm