a02 relax
TRANSCRIPT
-
8/11/2019 A02 Relax
1/14
For contingent use, please take this book safe !AA02
Web:http://www.dotast.cn
ZHEJIANG DOTAST HEALTHCARE EQUIPMENT CO.,LTD ADD:Gangtou Industrial Zone,Qingtian City ,Zhejiang,China
TEL:FAX:
86 0578 606666886 0578 6732799
-
8/11/2019 A02 Relax
2/14
1
2
3
4
Welcome to use A02 massage chair.
Please carefully read this instruction book before enjoying this machine.
For contingent use, please take this book safe
While reading, please take more attention on the safety warning or im-
portant contents.
Note: the factory reserves the right on changing the design and interpretation
without notice. The images in the book are for reference only, according to the
real object please
Contents
P r e - w
o r k
Safety precautionParts name
O t h e r s Analysis of machine problems
Specifications
U s a g e a n
d m a i n
t e n a n c e
Pre-work before massage
Usage of controller
I n s t a l
l a t i o n
Methods of installation
01
05
06
09
15
Maintenance 14
23
24
-
8/11/2019 A02 Relax
3/14
Attention
alarm for serious accide nt as hurt or death
alarm for hurt or damages for goods.
The activities which were forbidden to do Self-dismount was forbidden
The correct operating way to pull out power plug.Request user to follow the instructions
Presentation from below symbols
01 02
Carefully read and follow this instruction book to assemble and operateTwo parts for safety precaution: warning and attention
Warning
Warning Patients with serious hyherostosis Swollen lump and patient of thrombosis.Patients with serious heart troubles
Women are pregnant or may become pregnan t. Children or people who over drunk.
Do not sleep on this machine.
Not recommended
Before using this machine, please confirm there has enough spacefor chair reclining
Any uncomfortable feeling from massage is suggested to consult with doctor.
Do not offer hard massage for headDo not massage the abdominal region and knee cap. Special carewhile massaging neck.Do not allow the kids using or playing near the chair, especially atworking.
Need keeper, if the user is mobility impaired or has communication
barrier.
Acc ide ntor hurt
Just allow to connect the power cable of this machine on suitable socket.Confirm fully pushed the plug in the socketPlug out after massageStop all the massage functions and power switch before plug the cord out
Fire or electric shock
Fire or electric shock
Dismount andmaintenance
Please do not store the cushion of this machine under folded. Acc ide nt
If this machine can not work. broken, watered or from other reasons, donot allow users to repair by themselves, please contact with the maintenanceworker.If the plug or power cable is broken, please contact with maintenanceworker to repair.Do not dismount any parts of this machine privately.Please check carefully over the cushions and coverings to confirm theyare under good condition.
Do not disconnect or connect the plug to the socket with a damphand,which may result in electrical shock or mechanical trouble. Please make sure that power plug is completely inserted into the socket without attachingany pin or rubbish,for which may causeelectrical shock,short circuit or fire.
Sure fever , may cause an electric shock.
-
8/11/2019 A02 Relax
4/14
Place this machine lay horizontally
Must have a space over 60cm from the back side of machine
Please try soft massage and do not enjoy over 20 minutes
as a new user. Do not allow for a point over 5 minutes . Sit after confirms the massage rollers are on the right position
Make sure the power switch is off beforesupply power.
Before plug out he power wire, please confirm thatall chair functions are stopped
Make sure the plug is connected well with socket
Make sure the power wire is under good condition and there is no water or dirty things on the plug-pins
Make sure the ground line is connected well before suppling power
Avoid from topple over
Enough space for back part reclining .
Over time use will cause adverse effect
Avoid from sudden injure
If not, may occur breakage, whilesupply power again
Avoid from short circuit or fire
Avoid from sudden accident
Avoi d fro m dam age s to themachine cover
Avoid from electric leakage or electric shock.
Attention
Pull out the plug, if there has any electric problem
Separate the power plug from the socket at once, after electricity fails. If not, may cause bre-akage while electrified.
Avoi d from e lect ricleakage or shock
Avoi d fro m elec tri caccident
Avoi d fro m sudd en accident
Avoid from sudden acc ident
Attention
03 04
Grounding Unable toconnect these space
Gas pipe:Telephone lines and Lightning rod:conduit: on plastic cant have function.
may cause electrical shock,short circuit or fire.may cause electrical shock,short circuit or fire.
Do not press by force on the massage rollers.Do not put your hands between the rollers while
working the chair.Do not put your hands in the working mechanical
parts.Do not put any things in the slot.Do not stand on the chair, or put heavy things on
it.Do not move while working.Do not directly cut off the power or switch off
while working.Do not put your hands or head in the space of leg
massager or under it.Do not wear hard headwear while massaging.Do not put hard things in the trouser pocket while
massaging.Do not press by force or seat on the reclined back
part or leg part.Do not massage by exposing skin or wearing little
Do not use this chair in over hot, damp, or corrosiveenvironment.
Do not use electric blanket on the machine.
Do not place near the stream over, or directly exposeto sunshine.
Do not use it outdoors.
Do not place or stock this machine near particularly damp place as swimming room, bathroom and so on
Must confirm it is under good earth connectionDo not use plug adaptor
Stop power supply, before cleaning
Stop power supply, after massage
While stop power supply, do not directly pull from the power cable .
-
8/11/2019 A02 Relax
5/14
P a r t a m ePar t Name
Casing of seat frame
Decorating parts
Installation 1
Step 3 Backrest Assembly
Step 2 Unpack the small package
Step 1 Unpack the large package
Method of Installation
05 06
Decorating parts
Take the left and right armrest , out from the box slowl y.
seat frame casing,
Leg massager
PillowController
Seat cushion
Back cushion
Control ler rack
Backrest cover
Movable pulley
E a r p
h o n e s o c k e t
U S B p o r t
P o w e r s o c k e t
P o w e r s w
i t c h
F u s e
b o x
Arm rest
Take out the main body, back cushion, seat cushion, pillow,controllers u p p o r t e r , l e g m a s s a g e r , c o n t r o l l e r a n d w i r e l e s s c o n t r o l l e r o fmassage chair from the box caref ully. In order to avoid damaging, we suggest atleast two person for moving t he main body of chair.
turn up
lock pin
lock position
side pin
connect plug-ins
Locate well the two bottom pins of backrest on the chair and fold up
the backrest. Connect the plug-ins and finish assemblin g .
-
8/11/2019 A02 Relax
6/14
Installation 2
(2) Connect the horn wire on the armrest to the joint of chair main body.(3) Connect well the wire of solenoid valve between arm rest and chair main body.(4) Attach the white axis sleeve on the rotation axis on the armrest. (Figure 2)(5) Move the armrest axis in the chute to the perfect position, then match wellthe couple axle between armrest and backrest. Finally, attach the white axissleeve on the rotation axle. Do not forget to add a washer and lock well the nut.
Note: no loosening between armrest and sell frame straight flute.(6) For assembling armrest axis in the chute, use the hex screw and washer tolock well.(7) For assembling couple axle between armrest and backrest, use hex screwand small white sleeve to fix well.
Installation (3)
Step 6 Assemble the controller supporter and fix the controller s
Step7 Assemble the backrest cushion, pillow and seat cushion
Step 8 O perating way after Installation
(4) (5) (6)
07 08(Figure 2)
(1) (2) (3)
12
3
4
5
6
Connect the air pipes
Connect the wireof solenoid valve
Connectthehornwire
1
2
3
4
5
6
As se mb le th earmrestrotationaxis
Assemble theaxisinthechute
7 As se mb le th ebackrest couple axle
Incline the chair main body forward to one side about 20 degree.
Loosen the two screws of rubber pad at bottom of seat frame. Finally
align the bottom kerf of seat frame casing with the rubber pad and
fasten the screws.(Note: About assembling the casing, ple ase follow as below figure 1 )
Step 4 Assemble the casing of seat frame
(Atfirst)Loosenthescrewsonrubberpad
(Then)Alignthebottomkerf totherubberpad.
( Afterthat) Putthe kervein tothe spacebetweenrubber padand seatframe,andfasten thescrews.
(Finally) Fasten and fix it via 5*10 pan head scr ewdr iver .
(Figure 1)
Method of InstallationMethod of Installation
Assemble backrest couple axle
Ali gn the loc ati ng pinwith the hole, and fix by
two black round headedsc rew(40 on the r igh tarmrest. Place the controller ont h e s u p p o r t e r . T h ewireless ontroller need top u t o n t h e b a c k o fcontroller.
Fix the backrest cushion on the chair via thezipper and bottom velcro on the seat
Connect well the backrest heat therapy plug-insand air pipes via color.
Put the pillow on the right position of backrestand fix well by velcro. Finally connect the air
pipe s.Place well the seat cushion and fix via velcro.Connect the air pipes of the seat cushion and seat
frame in sequence.
1.Connect the power wire to the machine2.Insert the plug of power line into the socket3.Open the power switch on the machine (Press to "I" position).4.Operate the controller to choose the massage functions and enjoy the
comfortable massage.5.For MP3 function please insert U-disk to the chair.6.MicroSD7.For earphone, please insert the earphone to the socket.
Step 4 Loosen the seat cushion fabric, and assemble the armrest
1 Connect the air pipes of armrest and chair main body.
-
8/11/2019 A02 Relax
7/14
Attention
Do not use or keep this chair in particularly damp like bathrooms, sauna rooms to avoid electrical shock.
Do not expose it to direct sunshine or use it in ambient hot temperature to avoid damages.
Place this machine on a even ground to avoid damages from toppleor noise or other troubles from uneven.
Confirmation before sitting on the chair
Confirm that there is no people, pets or substance in the scope of backrest and leg rest moveme nt.
Placement Attentions before placement
09 10
AttentionDo not move this machine while using.
Method of chair movement
Method of movement
Usually
45cm
27cm
203cm
1 3 5 c m
There must have enough spacearound the chair. There is aclearance 70cm from the front partof the chair to wall, and 60cm fromchair backrest.
Attentions before usingthe reclining functions
No huma n or sub sta nce aro undthe chair.Enough space for reclining.
Strapped up the wires and place on the chairseat to avoid broken from movement. Moveand put down gently, if not may caus e damagesfor inner parts. If the ground is made of woodor other easy broken material, do not move viathe wheels. We suggest two or more people tolift up and move it. Do not swing from left toright or risen up the leg part from soft parts.Confirm the power wire is separated fromsocket and put away. (It is the best way that the
backr est is fold ed . I f n ot bad movem ent willcause broken for backrest)
We suggest, if the door space is narrow forchair, place disassemble the armrest. 1.Use your hands to lay down the chair untilthe centre gravity weight is on the wheels. Holdwell and push forward to expected place. (Needsone people) 2.Two people, grasp well the square tube ofeach side and risen up gently to move to aimed
place .
Pre-work before massage Pre-work before massage
-
8/11/2019 A02 Relax
8/14
ON/OFF the machine Adjustment before massage
Caution
Notice
Please adjust the massage hands to c orrect position and lie down to avoidinjuring the head.
Before Adjustment
Shoulderposition
Adju st the m assag e hand s upwa rds to g et the p roper p osit ion
Adju st the ma ssage h ands do wnwa rd to get t he prop er posi tion
Ascending and descending function ofcalf rest and back rest and sync movement function of armrest.
Function Introduction
F un ct io n k ey s description and display
Shoulder positionadjustment
over highPerfect position
over low
Display for shoulder position adjusting figure
Adjus tment
According to the user body type, can use these buttons to micro adjust theshoulder position. Display the matching operation on the controller. (As abovefigure shows)
Warm ProposalWhen you feel the massage is not hard, please take away the pillow cushion and startmassage. Due to the dead weight of this machine, long time heavy load will make scar to thefloor. So if possible, please protect the floor by laying carpet.
Before Using, please raise up the pillow cushion, backrest cushionto check if there is breakage on it.For any brakage, please cut down
the power and repair.Please connect the plug with the proper socket.
Before seat down, please confirm there are no things in the crack of seat, back, leg an foot parts.Before seat down, please confirm the machine have been under
restored condition.While using, please do not stand on the chair.
S o c
k e
t f o r
e a r p
h o n e
U S B S o c k e
t
P o w e r s o c
k e
t
P o w e r s w
i t c h
F u s e
B o x
Step 1 Power on Confirm the power line is connected to thechair and power socket. Press on the power swich key behind thechair. The indicating lamps of the switch andpower key on the controller wil l light up. Thismoment the machine is under standby mode. Press on the power key on the controller tostart massage.
Step 2 Massage Enjoy the massage via selecting thefunction keys on the controller (pleasecarefully read the usage of controller).
Step 3 Shut off the power Press on the power button on thecontrolle to switch off this machine. It willautomatically restor e to initial state. Aft er res tor ati on, shu t off the pow erswitch behind the chair.Plug out the power line from the socket
Pre-work before massage Pre-work before massage
Hour Min
Speed Width
Intensity Ar m
L e g Buttock
ButtockVibrate
AdjustShoulder AdjustLegExten sion AdjustBackrest AdjustCafrest
A c t i
v a t e
B o d y C a r e
M e c h a n i c
H e a t e r
A i r b a g B a c k
&
W a i s t
S hou lder
&Nec k
E a s e
Remainingtime AutoMin
Shoulder Adjust
3DVol
Speed
Width
Intensity Lowerbody Foot&Calf Buttocks
ArmVibrationMemory set on
Music Volume
IntensityModeTransfer
AdjustBackrest
AdjustCalfrest
AdjustLegExtension
1211
-
8/11/2019 A02 Relax
9/14
Methods for storage
Replace the fuse wire
Usage of controller
13 14
Special fuctions servicingleather cover
Headrest and seat cushion are mounted to the seat with a nylon buckle. To dismount the headrest, you shall take down the nylon
buckle.Open the zipper on the head rest, back cushion and foot cushioncover, peel off the adhesive tape to take them apart.
Overlap the adhesive tap between head rest, back cushion and leg cushion to ensure the zipper between the two covers can be closed.
cleaning and servicing of massage chair
Before maintenance, pull off the power plug from the socket, other- wise electrical shock and injuries may happen.
Clean the cloth surface with neutral detergent or special detergent for clothes. the dirt on the back cushion, hand rest cushion and leg position shall be cleaned with a piece of cloth dampened with neutral detergent and air dried.
Cleaner can be used on the plastics , pipe or leather of the massage ch- air ,and wipe with a piece of cloth carefully.
Do not clean this device with cleaners containing organic solvent ,like gas online thinner and toluene , which may cause discoloring aging and cracking of leather
Do not spray any pesticide which may result in electrical shock or fire.
servicing electricity Please clean the dirty remote controller, control box with clean cloth Wet cloth is forbidden , in case of electricity leaking, and parts breaking
or the body accident
Instruction for earth connection
This product belongs to electrical apparatus. Before using thismachine, please make sure it was grounded. If not may cause electricshock. If the plug is with three pins, can directly use this machine. Ifthe power plug is with two pins, please carefully operat e as below.If the power socket has a grounding terminal, please use the groundwire to connect grounding termina l of machine and power socket.If the socket do not have grounding terminal, please contact with the
pro duc t sup pli er an d ele ct ric al engi nee rs.The following place s are forbidden to be connected with earth wire:1).Telephone wire and lightning rod, to avid thunder risk;2).If any section of the water pipe is plastic, grounding will be disabled.`3)Gas pipe prone to the risk of bombing and burning
If the fuse wire is burned up, please switch off the chair and separate from powersocket at first. Then using the screw driver to open fuse box and replace it by newfuse with same specifications. Finally screw up the power box to finish. Pleaseoperate with your electrician.
Do not dismount the back of the chair . The massage chair should be clean without any dust on it. Please keep the massage chair on dry ground Please cover the chair with dust-free cloth to prevent from dust when it is not used for a long time. Do not put the massage chair in too hot place or be exposed to direct sunlight.High temperature may shorten the life of electrical appliance and distort plastic parts. Do not store in any over - cold place . otherwise , when temperature of massage chair ries , moisture may be formed inside,which may damage inner parts.
Adjust the back, seat, calf angle to maintain comfortabl e status as relaxing in space capsule. Sync movement for backrest and armrest, backrest and seatrest. Massage pillow, which can offer muscle rel ax massage for
human neck and shoulder. Air pressure and sole point mixed massag e for arm and hand. Sync air pressure massage between calfrest and seat rest. Various position adjustable controller supporter
Pre-work before massage
V e
l c r o
H e a
d c u s h
i o n
S e a
t c u s h
i o n c u s h
i o n
-
8/11/2019 A02 Relax
10/14
nstru tionsController Instructions
15 16
Hour Min
Speed Width
Intensity Ar m
Le g Buttock
ButtockVibrate
AdjustShoulder AdjustLe gExtension AdjustBackrest AdjustCafrest
A c t i v a t e
B o d y
C a r e
M e c h a n i c
H e a t e r
A i r b a g B a c k
&
W a i s t
S hou lder
&Nec k
E a s e
Music Volume
IntensityModeTransfer
AdjustBackrest
AdjustCalfrest
AdjustLegExtension
nstru tionsController Instructions
Power on, and operate the mains switch of massage chair to "I" position. The mas-sage chair is located in reset state (make sure the backrest is in the highest positionand the footrest is in the lowest position). At this juncture, the chair will enter thestand by state. Only backrest, calf rest and elevation adjustment functions are avai-lable for this holding state.
1Startup the chair massaging function/StopWhile the chair is on reset condition, press on this button. The controller screen w-ill twinkle and the backrest and calf rest will recline to a comfortable angle. Thenusers can put any buttons to enjoy timed massage. Press the ON/OFF button againto turn off. The massage chair will stopped massaging while the time is up and res-tore to resetting condition via put ON/OFF button again.
2 DecompressionAuto Mode
Massage for whole upper body and activating all other functions (except heating f-unction),relax the bones and muscles.
3 EaseAuto ModeOffer step-by-step massage for upper body, with in-depth treatment for eight acup-uncture points. Meanwhile, all other functions will be extended to restore body str-ength. The timing is 15 minutes. All the background lamps of corresponding keyswill be lightened.
4 ActivateAuto Mode16 functions of prescription massage. It appoints 16 major massage points for upp-er body and extends fixed point in-depth massage for selected massage points. Th-erefore, the massage effect will be more delicate and accurate, relaxing muscle so-urness and pain and stimulating acupuncture points along both sides of spine. Thetiming is 15 minutes. All the back ground lamps of corresponding keys will be lig-htened.
Remainingtime AutoMin
Shoulder Adjust
3DVol
Speed
Width
Intensity Lowerbody Foot&Calf Buttocks
ArmVibrationMemory set on
-
8/11/2019 A02 Relax
11/14
1817
5 Body CareAuto MassageOffer overall and repeated massage for upper body. Meanwhile, all other functions will
be extended to relax shoulder, back and waist. The timing is 15 minutes. All the backg-round lamps of corresponding keys will be lightened.
6 MechanicPress the button to stop all the working functions for upper body, and press it again tostart up the Mechanic functions.
7 AirbagPress the button to stop all the massage functions for lower body, and press it again tostart up the Airbag functions.
8 Heater Press this button to startup the heating function for backrest .The backrest temperaturekeeps to 70 C .
9 Back WaistPress this button to make massage for the small of the back, simultaneously, the backg-round lamp of this button will be lightened.
10 Shoulder Neck Press this button to make massage for neck and shoulder part. Simultaneously, the bac-kground lamp of this button will be lightened.
11/12/13 Program MemoryPlease select the favorite massage functions, backrest angle, calf rest angle, speed andthen press the memory function button over six minutes since when the keypad tone ri-ngs.It will memorize the functions on that button and enjoy this memory massage any t-imevia pressing this button. There are three custom selection buttons for your favorite.Users can rechange the recorded functions via same operation as above.
14/15Use these buttons to manually adjust the shoulder position.
16/17
Intelligently adjust the leg part length to match different human hight
18/19Please use these buttons to adjust the reclining angle of backrest to get the most co-mfortable position.
20/21Please press these buttons to adjust a comfortable angle for leg foot part.
22 TappingManual Massage functionThere are five steps adjustment for width and 6 steps for speed.Press this button to select the tapping massage for point position of back in mediu-m intensity. Then press the button 3D to offer 3D point tapping massage for back,
press button 3D again to get up/down massage for back, press the third time to off-er up/ down 3D tapping massage for back and the fourth time to repeat the tappingmassage for point position of back. The functions are circularly adjusted via pressi-ng 3D button.
23 KnockingManual Massage functionThere are five steps for width adjustment and 6 steps for speed.Press this button to select the knocking massage for point position of back in medi-um intensity. Then press the button 3D to offer 3D point knocking massage for bac-k, press button 3D again to get up/down knocking massage for back, press the thir-d time to offer up/ down 3D knock and the fourth time to repeat knocking massage f-
or point position of back. The functions are circularly adjusted via pressing 3D button.
24 KneadingManual Massage FunctionThere are five steps for width adjustment and 6 steps for speed.Press this button to select the kneading massage for point position of back in mediumintensity. Then press the button 3D to offer 3D point kneading massage for back, pre-ss button 3D again to get up/down kneading massage for back, press the third time to
Adjust LegExt ension
nstru tionsController Instructions nstru tionsController Instructions
-
8/11/2019 A02 Relax
12/14
-
8/11/2019 A02 Relax
13/14
21 22
nstru tionsController Instructions nstru tionsController Instructions
41 Synchronous FunctionPress this button to select the music synchronous massage. This function will unite themusic frequency with the massage actions.
42/43 Option Keys for songsWhile playing the music, press these buttons to select the previous or next song.
44/45 Sound Volume Adjusting KeysWhile playing the music, press these buttons to increase and decrease the music soundvolume.
46 ON/OFFControl key for turn on or off the whole chair massage functions.
47 ON/OFF
Control key for turn on or off the music function.
48/49 Keys for previous/next song selection
50/51 Volume control keys
52 Mode ConversionPress this button to circularly select the auto massage functions: decompression, c-
ntroduction of keys of remote controllef
ozy, relax, fitness, back & waist, neck and shoulder.
53 Speed Adjusting
54/55 Adjust Elevation
56/57 Adjust Backrest
58/59 Adjust Calfrest
Massage chair equip with sound box at the same time,in order to select yourfavorite mode to listen to music.Please insert U-tray which has music documentsof Mp3 format into USB plug at the back of electrical box of massage chair;Turnon power, then you can adjust music through remote con-troller.Please use originalearphone or sound box to listen to music..
SpecificationsSpecifications
-
8/11/2019 A02 Relax
14/14
An al ys is o n ma ch in e pr ob le m
Attention If problems all are not from above reasons, please stop power suppl y andc o n t a c t w i t h t h e d i s t r i b u t o r o r f a c t o r y f o r m a i n t e n a n c e .
Phenomenon Possible cause Processing method
Can not work aftersupplied power
Working with tap-tap-tapor hum sounds
Abnorma l sounds suddenl yoccurred while working
Suddenly stopped working
Abno rma l over heat fro m power wire and plug
Can not recline
Can not restoreafter reclined
C o n t r o l p a n e loverheat seriously
Do not open the power switch
Have not choose massage function
The fuse burned up
A faul t in t he co nt rol lin g ci rcu it
Sounds from air pump, motor or other mechanical parts
If after long time works
If there is bad power connection
Work overloadingly
Cause from long time work
Cut down the power and use after 30 minutes
Cut down the power and c heckafter 30 minutes
Supply power again
Cut down the power and use after 30 minutes
Cut down the power and call themaintenance worker
To move the obstructer; stop workand use after 30 minutes
Cut down the power and cal l themaintenance worker
Different hight for the massage rollers
Bad connect between plug and socket
Have broken on power wire or plug Please request the manufactureror service man to replace new power li ne.
Normal phenomenon
Auto programmed time is up
Causes from other reasons
Obstructer there; work overloadedautomatically stopped work for protecting machine
Problem on electromotion pole orplug-ins under bad connection
Cause from long time work
Common phenomenon
Switch on
Press on massage function
Connect again
Replace it by a fuse with same specifications
Contact with the mainten-ance department of supplier
Normal phenomenon
Contact with the maintenance worker
23 24
Rollers under alternately work
Contact with the maintenanceworker
SpecificationsSpecifications
Rated Voltage
Rated Frequency
Power Consumption
Safety Standards
Performance parameter
Massage Stroke Length(inch)
Rol lers Space Between(inch)
Tap cpm
Pummel cpm
Knead&Tap cpm
Shiatsu cpm
Knead cpm
Backrest Recline Angle( )
Calfrest Recline Angle( )
Calfrest Stretch Length(cm)
Model
Dimension of main body.(
Technical Spec.Model
inch)
ModelSpecifications
50/60Hz
AC110-120V AC200-240V
200-220W
Type I
A06
32
1.5-7
200-600
100-450
10-90
180
25-100
0-100
120-180
0-25
A02
A02
L139.5*W26*H26.7
106-130Seat cushion Recline Angle( )
94 Net weight of main body.(kgs)
L29.9*W18.9*H44.9
112.2
28.9
37.5
Dimension of armrest body. (inch)
Gross weight of armrest body .(kgs)
Net weight of armrest body .(kgs)
Gross weight of ma in body.(kgs)