a swagelok company - infracominfracom.kylos.pl/profil_tech_katalog/a/11/11_01_(02150).pdf · a...

$: A Swagelok Company - InfraCOMinfracom.kylos.pl/profil_tech_katalog/a/11/11_01_(02150).pdf · A Swagelok® Company Stainless Steel ... Specifications & Data ... Sanitary Flange to$
A Swagelok ® Company

Sta in less Stee lComponents for theLiquid F low Indust r ies

www.swagelok.comwww.jensenfittings.com

Sanitary Kwik-Clamp Fittings.............................................. ....................................................1Sanitary Kwik-Clamp Elbows.............................................. ....................................................2Sanitary Kwik-Clamp Tees.................................................. ....................................................3Sanitary Kwik-Clamp Crosses, Clamps & Gaskets ............ ....................................................4Sanitary Kwik-Clamp Ferrules & Adapters ......................... ....................................................8Kwik-Clamp Adapters ......................................................... ....................................................10Sanitary Kwik-Clamp Adapter Reducers ............................ ....................................................12Sanitary Kwik-Clamp Lateral & True Y ............................... ....................................................14

Industrial Kwik-Clamp Fittings ............................................ ....................................................15Industrial Kwik-Clamp Elbows, Tees................................... ....................................................16Industrial Kwik-Clamp Adapters & Reducers...................... ....................................................17

Sanitary Butt Weld Fittings ................................................. ....................................................19Sanitary Butt Weld Fittings General Specifications & Data ......................................................... ....................................................20

Bio-Pharm Fittings .............................................................. ....................................................27Bio-Pharm Fittings Specifications....................................... ....................................................28Swagelok TS Fittings .......................................................... ....................................................30Bio-Pharm Automatic Weld Fittings .................................... ....................................................33Bio-Pharm Kwik-Clamp Fittings.......................................... ....................................................40

Sanitary Acme Threaded Fittings ....................................... ....................................................45Sanitary Acme Threaded Fittings General Specifications & Data ......................................................... ....................................................46Tube

O.D. Butt Weld Fittings (Unpolished).................................. ....................................................59 O.D. Butt Weld Fittings General Specifications & Data...... ....................................................60

Miscellaneous Flow Components....................................... ....................................................65Manual Butterfly Valves....................................................... ....................................................66Air-Actuated Butterfly Valves .............................................. ....................................................67Vertical Disk Check Valves ................................................. ....................................................68Ball Check Valves ............................................................... ....................................................69Compression and Relief Valves.......................................... ....................................................70Sanitary Ball Valves ............................................................ ....................................................71Hangers .............................................................................. ....................................................73Inline Strainer and Filter Specifications and Data .............. ....................................................74Sightglass Specifications (JCD54) ..................................... ....................................................76Sightglass Specifications (#162S & #162) ......................... ....................................................78Jensafe ............................................................................... ....................................................79Weld In Sightglass .............................................................. ....................................................80Lateral and True Y .............................................................. ....................................................80Flow Plate ........................................................................... ....................................................81Sanitary Flange to Swagelok Tube Fitting.......................... ....................................................81Interlock Fittings.................................................................. ....................................................82John Perry Fittings.............................................................. ....................................................84APV-K-Clamp...................................................................... ....................................................85APV-PV Threaded .............................................................. ....................................................87Specials .............................................................................. ....................................................913A ....................................................................................... ....................................................95ISO...................................................................................... ....................................................96

Table of Contents

Heat TreatmentDuring bending and other forming processes, stress can develop. Jensenheat treats all of these products with our own vacuum annealing furnace.This process minimizes stress corrosion cracking and provides extraprotection for fluid products using Jensen fittings.

ISO RegisteredJensen is an ISO 9002 Registered Company. This international qualitymanagement system is designed to establish quality standards and ensurethey are met. This process is monitored with external and internal audits toassure continuous improvement. (Jensen is also a 3A Member company.)

SQC - Statistical Quality ControlJensen uses SQC extensively in conjunction with our ongoing QualityProgram. Fittings are inspected using SQC to monitor tolerances, angularity,squareness, ovality and polish finishes to meet or exceed industry standards

•

Jensen . . .Quality Products Since 1959

•

•

PackagingAll Jensen fittings are properly packaged and labeled with a full description.This bar code system ensures correct shipping procedures and productidentification.

Heat TraceabilityAll applicable 316L fittings are identified with heat numbers. Fittings madewith more than one component will carry multiple heat numbers (i.e. areducing tee). Material Test Reports (MTR's) are also available to documentall heat numbers. At the time of order, please specify if heat numbers andMTR's are required.

Cap & Bag PackagingAll AWF/TL fittings, when applicable, will be shipped, capped, bagged andlabeled. The label will show our part number, description and heat numbers.

•

•

•

Prefix:JC = Jensen Kwik-ClampJ = Jensen Sanitary Butt Weld, Tube OD and Non Kwik-Clamp Gaskets

(ie, APV or APV Fittings)JTL = Jensen Extended Tangent (BPE Fittings)Number = Acme Threaded or Industrial Kwik-Clamp

Part Number Guide

2= Elbow7= Tee9= Cross

12= Union13= Fastener14= Ferrule (KC, Plain

Bevel Seat, APC orAPV)

15= Ferrule (ACME, APC)16= End Cap17= Tube Section18= Female NPT

19= Male NPT21= Any Connection x

Male NPT22= Any Connection x

Female NPT23= Thermometer Cap24= Hanger25= Wrench26= BW x Female NPT28= Lateral or True Y30= Sample Valve31= Concentric Reducer

32= Eccentric Reducer38= Flanges40= Gaskets45= Check Valve54= Sightglass60= Relief or Compression

Valve80= Orifice Plate

160= Divert or Shut-OffValve

162= Sightglass181= Male Camlock

X= ShortS= Standard

AM7= American StandardEX= Expanding

(Roll-On)

R= Roll-On (Bevel SeatFerrules only) orReducing (tees only)

W= WeldM= Tri-Clamp or

Kwik-Clamp

T= ThreadedC= ThreadedF= Plain FerruleK= 45 Degree

4= 3046= 316L

Suffix:

Middle:

1= Unpolished ID and OD3= Polished ID (32 Ra

and Unpolished OD)5= Polished OD (32 Ra)

and Unpolished ID7= Polished ID (32 Ra) and

Polished OD (32 Ra)

3PC= Polished ID (20 Ra)and Unpolished OD

7PL= Polished ID (20 Ra) andPolished OD (32 Ra)

3PD= Polished ID (15 Rawith electropolish) andUnpolished OD

7PM=Polished ID (15 Ra withelectropolish) andPolished OD (32 Ra)

Ra= Rough Average

Polish Code:

Material:

1/8 in.=181/4 in.=253/8 in.=381/2 in.=505/8 in.=583/4 in.=75

1 in.=101-1/4 in.=1251-1/2 in.=15

2 in.=202-1/2 in.=25

3 in.=30

4 in.=406 in.=608 in.=80

10 in.=10012 in.=120

Size:

This guide is designed to help explain how to properly put together Jensen part numbers for thepurpose of quoting, ordering and referencing. We will be referring to the section and color codesfrom the Jensen/Swagelok catalog number MS-02-150.

Section:Sanitary Kwik-Clamp Fittings (pages 1-14)All part numbers in this section will begin with a “JC” which represents Jensen Clamp. Thesurface finish for all of the products in this section will be 32 Ra ID and 32 Ra OD. Based uponthis, we will not include the polish code into the part number. The full part number consists of theitem code, material grade (304/316L) and size. If there are two sizes, such as for a reducer or anadapter, both sizes are listed.

Example:

JC2 4 20

Item Code Material Grade Size(4=304, 6=316L)

Section:Industrial Kwik-Clamp Fittings (pages 15-17)These fittings are dimensionally the same as the fittings in the Sanitary Kwik-Clamp section. Thedifference is that these fittings have either a polished or unpolished ID or OD. One of three polishcodes must be specified:

Polish Code 1 - unpolished ID and unpolished OD

Polish Code 3 - 32 Ra ID and unpolished OD

Polish Code 5 - unpolished ID and 32 Ra polished OD

The full part number will consist of the item code, material grade (304/316L), polish and the size.

Example:

2CLMO 4 1 15

Item Code Material Grade Polish Code Size(4=304, 6=316L) (1,3,5)

Section:Sanitary Butt Weld Fittings (pages 19-26)All part numbers in this section will begin with a “J” which represents Jensen weld. The surfacefinish for all of the products in this section will be:


Polish Code 3 - 32 Ra ID and unpolished OD

Polish Code 5 - unpolished ID and 32 Ra polished OD

Polish Code 7 - 32 Ra ID and 32 Ra OD

Based upon this, we will include the polish code into the part number. The full part number con-sists of the item code, material grade (304/316L), polish and the size. If there are two sizes, suchas for a reducer or an adapter, both sizes are listed.

Example: J2S 4 7 20

Item Code Material Grade Polish Code Size(4=304, 6=316L) (1,3,5,7)

Section:Bio-Pharm Fittings (pages 27-44)Jensen’s Bio-Pharm product is produced in four surface finishes. You must specify the polish codein the part number.

Polish Code 3PC - 20 Ra ID polished, unpolished OD

Polish Code 7PL - 20 Ra ID polished, 32 Ra OD polished

Polish Code 3PD - 15 Ra ID polished and electropolished, unpolished OD

Polish Code 7PM - 15 Ra ID polished and electropolished, 32 Ra OD polished

The full part number will consist of the item code, material grade (316L only), polish code and size.

Example:JTL7W 6 7PL 30

Item Code Material Grade Polish Code Size(6=316L only) (3PC, 7PL, 3PD, 7PM)

NOTE: The only exception to the above are the JTL14AM7 ferrules. These part numbers will con-sist of the item code, material (316L only), polish code (PL or PM) and size.

Example:JTL14AM7 6 PL 15

Item Code Material Grade Polish Code Size(6=316L only) (PL,PM)

Section:Sanitary Acme Threaded Fittings (pages 45-58)The surface finish for all of the products in this sectin will be 32 Ra ID and 32 Ra OD. The full partnumber consists of the item code, material grade (304/316L) and size. If there are two sizes, suchas for a reducer or an adapter, both sizes are listed.

Example:

14WF 4 40


Section:Tube OD Unpolished Butt Weld Fittings (pages 59-64)All part numbers in this section are unpolished ID and OD. The polish code for all items in thissection will be:


The full part number will consist of the item code, material grade (316L only), polish code andsize. Based upon this, we will include the polish code in the part number. The full part numberconsists of the item code, material grade (304/316L), polish and size. If there are two sizes, suchas for a reducer or an adapter, both sizes are listed.

Example:

J31W 4 1 2015

Item Code Material Grade Polish Code Size(4=304, 6=316L) (1)

Example:

J19W 4 20


Exceptions: J19W, J38W, 26EF, J16W

These items are completely machined and are only available with a 32 Ra, ID/32 Ra OD.

Section:Miscellaneous Flow Components (pages 65-90)The surface finish for all of the products in this section will be 32 Ra ID and 32 Ra OD. Basedupon this, we will not include the polish codes in any of the part numbers. This section offers quitea variety of sightglasses, fittings and strainers. We will look at each group of products individually.

Hangers: J24FCF 15 J24PVC 25

Item Code Size Item Code Size

NOTE: These are available in 304 only. We do not include the material grade in these part numbers.

Strainers: SM1 6 20

Item Code Material Grade Size(6=316L only)

Sightglasses:JCD54 6 20


Interlock Fittings:14WI 6 15


John Perry Fittings:15WFF 4 20


APV K-Clamp:JA14X 4 30


PV Threaded:2CPV 6 40


A Swagelok Company

Sanitary

Kwik-Clamp

Fittings

1

SANITARY

KWIK

CLAMP

FITTINGS

2

JC2 – 90˚ ELL

Stainless Steel Hex Nut 304 only.

JC215 – 90˚ SWEEP ELL

A

A

R

A

B

B

A

B

A

SIZE A B APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

223⁄431⁄241⁄4565⁄8101⁄2

50.869.988.9

108.0127.0168.3266.7

11⁄221⁄4333⁄441⁄269

38.157.276.295.3

114.3152.4228.6

0.350.440.811.002.003.66

12.10


JC214 – 90˚ SWEEP ELL

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄16

231⁄32

323⁄32

419⁄32

513⁄32

77⁄32

55.675.494.4

116.7137.3183.3

223⁄431⁄241⁄4565⁄8

50.869.988.9

108.0127.0168.3

0.601.191.943.134.758.65


111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄16

231⁄32

323⁄32

419⁄32

513⁄32

77⁄32

55.675.494.4

116.7137.3183.3

223⁄431⁄241⁄4565⁄8

50.869.988.9

108.0127.0168.3

0.390.691.061.592.755.06

JC2-J31 – 90˚ REDUCING ELL, NON-TAPEREDSIZE A B APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

2223⁄4223⁄431⁄2223⁄431⁄241⁄4223⁄431⁄241⁄451⁄8

50.850.869.950.869.988.950.869.988.9

108.050.869.988.9

108.0130.2

2223⁄4223⁄431⁄2223⁄431⁄241⁄4223⁄431⁄241⁄45

50.850.869.950.869.988.950.869.988.9

108.050.869.988.9

108.0127.0

0.380.740.951.101.401.581.952.151.822.382.302.502.904.004.75

Sanitary fittings meet the geometry of ISO 2852.


JC2K – 45˚ ELL

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

11⁄817⁄16

13⁄421⁄16

23⁄831⁄841⁄2

28.636.544.552.460.379.4

114.3

11⁄221⁄4333⁄441⁄269

38.157.276.295.3

114.3152.4228.6

0.240.310.500.571.192.257.80


JC7 – TEE

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

23⁄823⁄431⁄231⁄233⁄441⁄253⁄4

60.369.988.988.995.3

114.3146.1

43⁄451⁄27771⁄29111⁄2

120.7139.7177.8177.8190.5228.6292.1

0.380.691.381.592.503.88

12.20


JC7S – SHORT OUTLET TEE

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

23⁄823⁄431⁄231⁄233⁄441⁄253⁄4

60.369.988.988.995.3

114.3146.1

11⁄813⁄815⁄817⁄821⁄823⁄427⁄8

28.634.941.347.654.069.973.0

0.330.631.351.502.453.80

11.90

SIZE A B C APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

JC7R – REDUCING TEE (Reduced Size on Branch)

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 16 x 11⁄26 x 26 x 21⁄26 x 36 x 4

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 25.4152.4 x 38.1152.4 x 50.8152.4 x 63.5152.4 x 76.2152.4 x101.6

23⁄421⁄8213⁄32

23⁄8221⁄32

213⁄16

23⁄8229⁄32

31⁄16

33⁄32

31⁄8313⁄32

39⁄16

319⁄32

319⁄32

51⁄251⁄251⁄251⁄251⁄451⁄2

69.954.061.160.367.571.460.373.877.878.679.486.590.591.391.3

139.7139.7139.7139.7133.4139.7

25⁄32

29⁄16

29⁄16

227⁄32

227⁄32

227⁄32

33⁄32

33⁄32

33⁄32

33⁄32

41⁄16

41⁄16

41⁄16

41⁄16

41⁄16

53⁄453⁄453⁄453⁄453⁄453⁄4

54.865.165.172.272.272.278.678.678.678.6

103.2103.2103.2103.2103.2146.1146.1146.1146.1146.1146.1

45⁄16

51⁄851⁄8511⁄16

511⁄16

511⁄16

63⁄16

63⁄16

63⁄16

63⁄16

81⁄881⁄881⁄881⁄881⁄8111⁄2111⁄2111⁄2111⁄2111⁄2111⁄2

109.5130.2130.2144.5144.5144.5157.1157.1157.1157.1206.4206.4206.4206.4206.4292.1292.1292.1292.1292.1292.1

1.251.351.381.651.651.592.752.802.502.503.363.253.363.313.677.407.507.607.667.757.86

3

SANITARY

KWIK

CLAMP

FITTINGS

R

A

A

A

A

B

A A

B

B

A

C

4

SANITARY

KWIK

CLAMP

FITTINGS

A

B

A

AB

A B


JC7RS – SHORT OUTLET REDUCED TEE


38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 25.4152.4 x 38.1152.4 x 50.8152.4 x 63.5152.4 x 76.2152.4 x101.6

25⁄32

29⁄16

29⁄16

227⁄32

227⁄32

227⁄32

33⁄32

33⁄32

33⁄32

33⁄32

41⁄16

41⁄16

41⁄16

41⁄16

41⁄16

53⁄453⁄453⁄453⁄453⁄453⁄4

54.865.165.172.272.272.278.678.678.678.6

103.2103.2103.2103.2103.2146.1146.1146.1146.1146.1146.1

13⁄815⁄815⁄817⁄817⁄817⁄821⁄821⁄821⁄821⁄825⁄825⁄825⁄825⁄825⁄835⁄835⁄835⁄835⁄835⁄833⁄4

34.941.341.347.647.647.654.054.054.054.066.766.766.766.766.792.192.192.192.192.195.3

1.251.351.381.651.651.592.752.802.502.503.363.253.363.313.677.407.507.607.667.757.86


JC9 – CROSS

1⁄23⁄4111⁄2221⁄234

12.719.125.438.150.863.576.2

101.6

25⁄825⁄823⁄823⁄431⁄231⁄233⁄441⁄2

66.766.760.369.988.988.995.3

114.3

51⁄451⁄443⁄451⁄27771⁄29

133.4133.4120.7139.7177.8177.8190.5228.6

0.440.440.560.881.571.782.794.14

5

SANITARY

KWIK

CLAMP

FITTINGS

BC

A D

AJC13HC – SINGLE PIN HEAVY DUTY CLAMPJC13HD – HEAVY DUTY CLAMPJC13HDR – ROUND HEAVY DUTY CLAMP

JC13HD JC13HDRAJC13HC

SIZE A B C D APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

JC9R – REDUCING CROSS


38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 25.4152.4 x 38.1152.4 x 50.8152.4 x 63.5152.4 x 76.2152.4 x 101.6

25⁄32

29⁄16

29⁄16

227⁄32

227⁄32

227⁄32

33⁄32

33⁄32

33⁄32

33⁄32

41⁄16

41⁄16

41⁄16

41⁄16

41⁄16

53⁄453⁄453⁄453⁄453⁄453⁄4

54.865.165.172.272.272.278.678.678.678.6

103.2103.2103.2103.2103.2146.1146.1146.1146.1146.1146.1

23⁄421⁄8213⁄32

23⁄8221⁄32

213⁄16

23⁄8229⁄32

31⁄16

33⁄32

31⁄8313⁄32

39⁄16

319⁄32

319⁄32

51⁄251⁄251⁄251⁄251⁄451⁄2

69.954.061.160.367.571.460.373.877.878.679.486.590.591.391.3

139.7139.7139.7139.7133.4139.7

45⁄16

51⁄851⁄8511⁄16

511⁄16

511⁄16

63⁄16

63⁄16

63⁄16

63⁄16

81⁄881⁄881⁄881⁄881⁄8111⁄2111⁄2111⁄2111⁄2111⁄2111⁄2

109.5130.2130.2144.4144.4144.4157.1157.1157.1157.1206.4206.4206.4206.4206.4292.1292.1292.1292.1292.1292.1

51⁄241⁄4413⁄16

43⁄455⁄16

55⁄843⁄4513⁄16

61⁄863⁄16

61⁄4613⁄16

71⁄873⁄16

73⁄16

11111111101⁄211

139.7108.0122.2120.7134.9142.9120.7147.6155.6157.1158.8173.0181.0182.5182.5279.4279.4279.4279.4266.7279.4

0.901.701.703.453.452.003.653.623.103.124.204.064.204.144.598.108.208.258.559.579.83

SIZE A APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm

11⁄2221⁄2346

38.150.863.576.2

101.6152.4

2.1222.6543.1853.7174.8206.695

53.967.480.994.4

122.4170.1

9.611.213.614.818.826.0

A

6

AJC13HS – THREE SECTION CLAMP

SANITARY

KWIK

CLAMP

FITTINGS


11⁄2221⁄234

38.150.863.576.2

101.6

2.1222.6543.1853.7174.820

53.967.480.994.4

122.4

0.860.931.051.311.70

AJC13HP – HIGH PRESSURE CLAMPSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

11⁄2221⁄234

38.150.863.576.2

101.6

2.0462.5783.1103.6404.744

52.065.579.092.5

120.5

22.028.032.038.044.0

JC13HD – 3/4” CLAMP

SIZE INCHES MILLIMETERS

A 1.125 28.6A

GASKETS

Jensen Kwik-Clamp Gaskets

Standard-Molded, one piece O-Ring gasket

JC40N BUNA-N RUBBERJC40T WHITE TEFLONJC40S SILICONEJC40V VITONJC40E EPDM

* One size accommodates 1⁄2" & 3⁄4" fittings.* Weight approximately 6 ounces.

7

SANITARY

KWIK

CLAMP

FITTINGS

JC13HDR-ROUND HEAVY DUTY CLAMPJC13HD-HEAVY DUTY CLAMP(With wing nut tightened to 25 in.-lb.of torque)

AJC13HC-HEAVY DUTY CLAMP(With wing nut tightened to 25 in.-lb.of torque)

AJC13HP-HIGH PRESSURE CLAMP(With wing nut tightened to 25 ft lb of torque)

Clamps are tested hydrostatically using Standard-Molded Buna-M material gaskets. All ratings shown are dependent uponrelated components in the system, absence of shock pressure,proper expansion of ferrules, assembly of joints, and installation.For temperatures above 250˚F/121.1˚C we recommend onlyAJC13HP clamps be used.

PRESSURE RATINGS psi/Bar

Temperature SIZE TUBE O.D.˚F / ˚C 1⁄2 3⁄4 1 11⁄2 2 21⁄2 3 4 670/21.1 1500/103.4 1500/103.4 500/34.5 500/34.5 450/31.0 400/27.6 350/24.1 200/13.8 150/10.3

250/121.1 1500/103.4 1500/103.4 250/17.2 250/17.2 250/17.2 200/13.8 150/10.3 125/8.6 75/5.2


Temperature SIZE TUBE O.D.˚F / ˚C 1 11⁄2 2 21⁄2 3 470/21.1 500/34.5 500/34.5 450/31.0 400/27.6 350/24.1 200/13.8

250/121.1 250/17.2 250/17.2 250/17.2 200/13.8 150/10.3 125/8.6


Temperature SIZE TUBE O.D.˚F / ˚C 11⁄2 2 21⁄2 470/21.1 1500/103.4 1000/68.9 1000/68.9 1000/68.9

250/121.1 1200/82.7 800/55.1 800/55.1 800/55.1

8

SANITARY

KWIK

CLAMP

FITTINGS

JensenKWIK-CLAMP

GENERAL SPECIFICATIONS AND DATA PAGE

MATERIALS OF CONSTRUCTION AND DESIGN

All fittings available in Stainless Type 304 & 316L. Captive Hexagon Nut as shown is StainlessT304. All one inch fittings take 1-1/2" clamp assemblies. Kwik-Clamps in Type 304 Stainless Steel only.

Heat traceability is available on all 316L fittings, if specified at the time of order. Each 316L fittingwill be marked with its correct heat number.

SIZE A D E APROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

JC14X – SHORT WELDING FERRULE

1⁄23⁄4111⁄2221⁄234681012

12.719.125.438.150.863.576.2

101.6152.4203.2254.0304.8

1⁄21⁄21⁄21⁄21⁄21⁄21⁄25⁄83⁄4111

12.712.712.712.712.712.712.715.919.125.425.425.4

.370

.620

.8701.3701.8702.3702.8703.8345.7827.7609.760

11.732

9.415.722.134.847.560.272.997.4

146.9197.1247.9298.0

0.5000.7501.0001.5002.0002.5003.0004.0006.0008.000

10.00012.000

12.719.125.438.150.863.576.2

101.6152.4203.2254.0304.8

0.040.050.120.090.120.150.180.380.421.254.007.50

SIZE C D E APROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

JC14AM7 – BUTT WELDING FERRULE

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

11⁄811⁄811⁄811⁄811⁄811⁄811⁄2

28.628.628.628.628.628.638.1

0.8701.3701.8702.3702.8703.8345.782

22.134.847.560.272.997.4

146.9

1.0001.5002.0002.5003.0004.0006.000

25.438.150.863.576.2

101.6152.4

0.090.130.200.250.310.561.20

SIZE A D E APROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

JC14H – TANK WELDING FERRULE

111⁄2221⁄234

25.438.150.863.576.2

101.6

15⁄815⁄813⁄413⁄4113⁄16

21⁄8

41.341.344.544.546.054.0

0.8701.3701.8702.3702.8703.834

22.134.847.560.272.997.4

1.1601.6762.1922.7083.2244.256

29.542.655.768.881.9

108.1

0.170.350.691.001.402.50

A

D E

C

D E

A

D E

9

SANITARY

KWIK

CLAMP

FITTINGS


JC14EX – RECESSLESS FERRULE (For Expanding)

11⁄2221⁄234

38.150.863.576.2

101.6

11⁄815⁄16

13⁄817⁄16

11⁄2

28.633.334.936.538.1

11⁄2221⁄234

38.150.863.576.2

101.6

0.130.250.340.470.70

A

B

C

D E

SIZE C D E APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

JC14 – TANK WELDING SPUD (Light)

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

3333446

76.276.276.276.2

101.6101.6152.4

0.8701.3701.8702.3702.8703.8345.782

22.134.847.560.272.997.4

146.9

1.0001.5002.0002.5003.0004.0006.000

25.438.150.863.576.2

101.6152.4

0.160.210.400.540.771.252.32


JC14AHR – RUBBER HOSE ADAPTER ANDREDUCING RUBBER HOSE ADAPTER

1⁄2 x 1⁄81⁄2 x 1⁄41⁄2 x 3⁄81⁄21⁄2 x 5⁄81⁄2 x 3⁄43⁄4 x 1⁄83⁄4 x 1⁄43⁄4 x 3⁄83⁄4 x 1⁄23⁄4 x 5⁄83⁄4111⁄2 x 1⁄811⁄2 x 1⁄411⁄2 x 3⁄811⁄2 x 1⁄211⁄2 x 5⁄811⁄2 x 3⁄411⁄2 x 11⁄411⁄22 x 1⁄42 x 3⁄82 x 1⁄22 x 5⁄82 x 3⁄42 x 12 x 11⁄2221⁄234

12.7 x 3.212.7 x 6.412.7 x 9.512.712.7 x 15.912.7 x 19.119.1 x 3.219.1 x 6.419.1 x 9.519.1 x 12.719.1 x 15.919.125.438.1 x 3.238.1 x 6.438.1 x 9.538.1 x 12.738.1 x 15.938.1 x 19.138.1 x 31.838.150.8 x 6.450.8 x 9.550.8 x 12.750.8 x 15.950.8 x 19.150.8 x 25.450.8 x 38.150.863.576.2

101.6

1.5001.5001.5001.5001.5001.5001.5001.5001.5001.5001.5001.5001.6881.5001.5001.5001.5001.5001.5001.6881.6881.5001.5001.5001.5001.5001.6881.6882.3122.0003.0933.406

38.138.138.138.138.138.138.138.138.138.138.138.142.938.138.138.138.138.138.142.942.938.138.138.138.138.142.942.958.750.878.686.5

0.1880.2810.4060.5310.6560.7810.1880.2810.4060.5310.6560.7811.0310.1880.2810.4060.5310.6560.7811.2811.5310.2810.4060.5310.6560.7811.0311.5312.0312.5313.0314.031

4.87.1

10.313.516.719.84.87.1

10.313.516.719.826.24.87.1

10.313.516.719.832.538.97.1

10.313.516.719.826.238.951.664.377.0

102.4

0.030.030.030.030.030.040.040.040.040.050.050.050.140.280.280.280.300.300.300.400.300.550.550.600.600.600.650.650.550.801.111.51

NOTE: When ordering specify I.D. size of hose being used.1⁄2”- 3⁄4” (12.7mm - 19.1mm) available only in Type 316L Stainless Steel

Consult Jensen Fittings for availability of additional reducing sizes.

10


JC14AHRB – BREWERY STYLE LONG

111⁄2221⁄234

25.438.150.863.576.2

101.6

31⁄231⁄241⁄241⁄241⁄261⁄4

88.988.9

114.3114.3114.3158.8

11⁄32

15⁄821⁄825⁄831⁄841⁄8

26.241.354.066.779.4

104.8

0.350.450.951.251.752.75

SANITARY

KWIK

CLAMP

FITTINGS

C

D E

A

A


JC14AHT – TYGON HOSE ADAPTER

1⁄23⁄4111⁄2221⁄234

12.719.125.438.150.863.576.2

101.6

41⁄241⁄241⁄241⁄241⁄241⁄241⁄245⁄8

114.3114.3114.3114.3114.3114.3114.3117.5

0.3750.6250.8701.3701.8702.3702.8703.834

9.515.922.134.847.560.272.997.4

0.5000.7501.0001.5002.0002.5003.0004.000

12.719.125.438.150.863.576.2

101.6

0.030.050.310.500.680.871.121.68

JC17-14 – ADAPTERSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

33331⁄233⁄44

76.276.276.288.995.3

101.6

0.381.001.602.283.348.75

JC17-15 – ADAPTERSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

111⁄16

123⁄32

123⁄32

127⁄32

129⁄32

211⁄32

42.843.643.646.848.459.5

0.210.330.470.881.321.88

NOTE: When ordering specify I.D. size of hose being used onreducing sizes, show reduction required.

Stainless steel hex nut 304 only.

11

SANITARY

KWIK

CLAMP

FITTINGS

SIZE NO. JC21 NO. JC22 NO. JC21 NO. JC22(TUBE O.D.) C D APPROX. APPROX.

in. mm in. mm in. mm WT. LBS. WT. LBS.

JC21 & JC22 – ADAPTERS (N.P.T. Pipe Threads)

1⁄2 x 1⁄81⁄2 x 1⁄41⁄2 x 3⁄81⁄2 x 1⁄21⁄2 x 3⁄43⁄4 x 1⁄83⁄4 x 1⁄43⁄4 x 3⁄83⁄4 x 1⁄23⁄4 x 3⁄41 x 3⁄41 x 11 x 211⁄2 x 3⁄411⁄2 x 111⁄2 x 11⁄411⁄2 x 11⁄211⁄2 x 22 x 11⁄22 x 221⁄2 x 11⁄221⁄2 x 221⁄2 x 21⁄23 x 34 x 4

12.7 x 3.212.7 x 6.412.7 x 9.512.7 x 12.712.7 x 19.119.1 x 3.219.1 x 6.419.1 x 9.519.1 x 12.719.1 x 19.125.4 x 19.125.4 x 25.425.4 x 50.838.1 x 19.138.1 x 25.438.1 x 31.838.1 x 38.138.1 x 50.850.8 x 38.150.8 x 50.863.5 x 38.163.5 x 50.863.5 x 63.576.2 x 76.2

101.6 x 101.6

2.0002.0002.0002.0002.0002.0002.0002.0002.0002.0002.1872.2502.6252.1872.3122.4372.4372.6252.4682.656—2.7813.2813.5003.812

50.850.850.850.850.850.850.850.850.850.855.557.266.755.558.761.961.966.762.767.5—70.683.388.996.8

1.2501.5001.5001.5001.6251.2501.5001.5001.5001.6251.6251.625—1.6251.6252.2502.250—1.6872.3431.6561.7182.0932.1872.656

31.838.138.138.141.331.838.138.138.141.341.341.3—

41.341.357.257.2—

42.859.542.143.653.255.567.5

0.120.120.130.140.150.130.130.140.150.161.060.751.251.060.880.750.631.631.751.50

—1.941.753.255.75

0.250.250.270.280.280.250.250.270.280.290.750.56—

0.750.750.560.38—

1.751.131.881.501.252.384.00


JC16 – SOLID END CAP

1⁄2 & 3⁄41 & 11⁄2221⁄234681012

12.7 & 19.125.4 & 38.150.863.576.2

101.6152.4203.2254.0304.8

.187

.250

.250

.250

.250

.312

.437

.437

.562

.562

4.76.46.46.46.47.9

11.111.114.314.3

0.9841.9842.5163.0473.5794.6826.5708.570

10.57012.570

25.050.463.977.490.9

118.9166.9217.7268.5319.3

0.030.150.310.440.901.253.907.00

11.5015.00

C D

C D

AB

JC21(1⁄2 - 3⁄4)MALE

JC22(1⁄2 - 3⁄4)

FEMALE

JC21(1-4”)MALE

JC22(1-4”)

FEMALE

*NOTE: When adapter dimensions are given, sanitary style end is always indicated first.

NOTE: Special size adapters and fractional adapters are available on request.NOTE: 1⁄2 — 3⁄4 and 21⁄2 — 4 No hex centers

11⁄2" JC16 used on both 1" and 11⁄2" lines.3⁄4" used on both 1⁄2" and 3⁄4" lines.

12

SANITARY

KWIK

CLAMP

FITTINGS

A

B

JC31 – CONCENTRIC REDUCER

SIZE OVERALL APPROX.LENGTH WT. LBS.in. mm in. mm

3 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 36 x 4

76.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 101.6

9753131⁄8111⁄891⁄871⁄851⁄871⁄453⁄8

228.6177.8127.076.2

333.4282.6231.8181.0130.2184.2136.5

2.561.241.090.754.153.503.102.793.083.252.52


11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.8

353753

76.2127.076.2

177.8127.076.2

0.290.700.400.800.630.53

JC32 – ECCENTRIC REDUCER


3 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 36 x 4

76.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 101.6

9753131⁄8111⁄891⁄871⁄851⁄871⁄453⁄8

228.6177.8127.076.2

333.4282.6231.8181.0130.2184.2136.5

2.562.561.090.754.153.503.102.793.083.202.52


11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.8

353753

76.2127.076.2

177.8127.076.2

0.290.700.400.800.630.53

J14-C31 – ADAPTER-REDUCER (Concentric)


21⁄2 x 23 x 23 x 21⁄24 x 3

63.5 x 50.876.2 x 50.876.2 x 63.5

101.6 x 76.2

311⁄32

513⁄32

313⁄32

523⁄32

84.9137.386.5

145.2

0.771.251.052.12


11⁄2 x 1*2 x 12 x 11⁄221⁄2 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.1

37⁄32

57⁄32

37⁄32

511⁄32

81.7132.581.7

135.7

0.330.620.600.91


JC23B – THERMOMETER CAPS

1 & 11⁄2221⁄234

25.4 & 38.150.863.576.2

101.6

1.9842.5163.0473.5794.682

50.463.977.490.9

118.9

0.6250.6250.6250.6250.625

15.915.915.915.915.9

0.500.751.131.542.75

JC23B - 1" Tapped 1⁄2" NPT. All others 3⁄4".

*Includes Stainless Steel Hex Nut

13

SANITARY

KWIK

CLAMP

FITTINGS

JC31-15 – ADAPTER-REDUCER (Concentric)


21⁄2 x 23 x 23 x 21⁄24 x 3

63.5 x 50.876.2 x 50.876.2 x 63.5

101.6 x 76.2

37⁄32

57⁄32

311⁄32

517⁄32

81.7132.584.9

140.5

0.701.131.062.02


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.1

33⁄16

53⁄16

37⁄32

57⁄32

80.9131.781.7

132.5

0.360.590.560.82

JC15-C31 – ADAPTER-REDUCER (Concentric)


3 x 23 x 21⁄24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 63.5101.6 x 76.2

513⁄32

313⁄32

723⁄32

523⁄32

137.386.5

196.0145.2

1.151.103.252.50


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.8

37⁄32

57⁄32

37⁄32

511⁄32

311⁄32

81.7132.581.7

135.784.9

0.380.600.580.850.72

JC31-14 – ADAPTER-REDUCER (Concentric)


3 x 23 x 21⁄24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 63.5101.6 x 76.2

613⁄32

421⁄32

825⁄32

615⁄16

162.7118.3223.0176.2

1.771.993.393.63


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.8

41⁄861⁄847⁄32

67⁄32

413⁄32

104.8155.6107.1157.9111.9

0.580.830.951.231.43

J14-C32 – ADAPTER-REDUCER (Eccentric)


3 x 23 x 21⁄24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 63.5101.6 x 76.2

513⁄32

313⁄32

723⁄32

523⁄32

137.386.5

196.0145.2

1.050.932.461.96


11⁄2 x 1*2 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.8

37⁄32

57⁄32

37⁄32

511⁄32

311⁄32

81.7132.581.7

135.784.9

0.390.710.530.830.68

JC32-14 – ADAPTER-REDUCER (Eccentric)


3 x 23 x 21⁄24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 63.5101.6 x 76.2

613⁄32

421⁄32

825⁄32

615⁄16

162.7118.3223.0176.2

1.742.073.393.45


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.8

41⁄861⁄847⁄32

67⁄32

413⁄32

104.8155.6107.1157.9111.9

0.590.820.961.231.43

*Includes Stainless Steel Hex Nut

14

SANITARY

KWIK

CLAMP

FITTINGS

J15-C32 – ADAPTER-REDUCER (Eccentric)


3 x 23 x 21⁄24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 63.5101.6 x 76.2

513⁄32

313⁄32

723⁄32

523⁄32

137.386.5

196.0145.2

1.241.122.852.35


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.8

37⁄32

57⁄32

37⁄32

511⁄32

311⁄32

81.7132.581.7

135.784.9

0.450.760.590.990.84

JC32-15 – ADAPTER-REDUCER (Eccentric)


3 x 23 x 21⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 50.8101.6 x 63.5101.6 x 76.2

57⁄32

311⁄32

911⁄32

715⁄32

517⁄32

132.584.9

237.3189.7140.5

1.021.032.352.351.94


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 23 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.876.2 x 38.1

33⁄16

53⁄16

37⁄32

57⁄32

37⁄32

77⁄32

80.9131.781.7

132.581.7

183.3

0.340.570.510.780.711.31


JC28A – KWIK CLAMP LATERALAND REDUCING LATERAL

1⁄23⁄4111⁄2221⁄23461 x 1⁄21 x 3⁄411⁄2 x 1⁄211⁄2 x 3⁄411⁄2 x 12 x 1⁄22 x 3⁄42 x 12 x 11⁄221⁄2 x 1⁄221⁄2 x 3⁄421⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 1⁄23 x 3⁄43 x 13 x 11⁄23 x 23 x 21⁄24 x 1⁄24 x 3⁄44 x 14 x 11⁄24 x 24 x 21⁄24 x 3

12.719.125.438.150.863.576.2

101.6152.425.4 x 12.725.4 x 19.138.1 x 12.738.1 x 19.138.1 x 25.450.8 x 12.750.8 x 19.150.8 x 25.450.8 x 38.163.5 x 12.763.5 x 19.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 12.776.2 x 19.176.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

11⁄211⁄211⁄413⁄815⁄821⁄821⁄2343⁄411⁄411⁄413⁄813⁄813⁄815⁄815⁄815⁄815⁄821⁄821⁄821⁄821⁄821⁄821⁄221⁄221⁄221⁄221⁄221⁄23333333

38.138.131.834.941.354.063.576.2

120.731.831.834.934.934.941.341.341.341.354.054.054.054.054.063.563.563.563.563.563.576.276.276.276.276.276.276.2

31⁄231⁄245⁄16

51⁄16

51⁄267⁄881⁄410131⁄445⁄16

45⁄16

51⁄16

51⁄16

51⁄16

51⁄251⁄251⁄251⁄251⁄267⁄867⁄867⁄867⁄867⁄881⁄481⁄481⁄481⁄481⁄410101010101010

88.988.9

109.5128.6139.7174.6209.6254.0336.6109.5109.5128.6128.6128.6139.7139.7139.7139.7139.7174.6174.6174.6174.6174.6209.6209.6209.6209.6209.6254.0254.0254.0254.0254.0254.0254.0

31⁄231⁄233⁄8441⁄251⁄2783⁄4131⁄433⁄833⁄844441⁄241⁄241⁄241⁄251⁄251⁄251⁄251⁄251⁄277777783⁄483⁄483⁄483⁄483⁄483⁄483⁄4

88.988.985.7

101.6114.3139.7177.8222.3336.685.785.7

101.6101.6101.6114.3114.3114.3114.3139.7139.7139.7139.7139.7177.8177.8177.8177.8177.8177.8222.3222.3222.3222.3222.3222.3222.3

0.400.550.911.221.992.903.467.39

15.560.900.901.201.211.221.951.951.961.982.502.502.652.752.853.353.353.403.423.443.467.007.007.167.207.237.257.34

JC28B – KWIK CLAMP TRUE YSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

21⁄221⁄231⁄231⁄241⁄251⁄261⁄285⁄883⁄4

63.563.588.988.9

114.3139.7165.1219.1222.3

0.350.450.901.101.902.333.015.15

12.70

B

A C

A

A

A Swagelok Company

Industrial

Kwik-Clamp

Fittings

15


7MO – TEE

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

23⁄823⁄431⁄231⁄233⁄441⁄253⁄4

60.369.988.988.995.3

114.3146.1

43⁄451⁄27771⁄29111⁄2

120.7139.7177.8177.8190.5228.6292.1

0.380.691.381.592.503.88

12.20A

A

B

INDUSTRIAL

KWIK

CLAMP

FITTINGS

16

2CLMO – 90˚ ELL

A

A

R

A

A R


111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

223⁄431⁄241⁄4565⁄8101⁄2

50.869.988.9

108.0127.0168.3266.7

11⁄221⁄4333⁄441⁄269

38.157.276.295.3

114.3152.4228.6

0.350.440.811.002.003.66

12.10


2KMO – 45˚ ELL

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

11⁄817⁄16

13⁄421⁄16

23⁄831⁄841⁄2

28.636.544.552.460.379.4

114.3

11⁄221⁄4333⁄441⁄269

38.157.276.295.3

114.3152.4228.6

0.240.310.500.571.192.257.80

INDUSTRIAL POLISH CODES:Code Finish

1 NOT POLISHED, MILL FINISH3 32 Ra ID POLISHED, NOT POLISHED OD5 NOT POLISHED ID, POLISHED 32Ra OD

17

INDUSTRIAL

KWIK

CLAMP

FITTINGS

31-14MO – CONCENTRIC REDUCER


3 x 1⁄23 x 3⁄43 x 13 x 11⁄23 x 23 x 21⁄24 x 1⁄24 x 3⁄44 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 36 x 4

76.2 x 12.776.2 x 19.176.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 101.6

91⁄299753135⁄8131⁄8131⁄8111⁄891⁄871⁄851⁄871⁄453⁄8

241.3228.6228.6177.8127.076.2

346.1333.4333.4282.6231.8181.0130.2184.2136.5

2.702.562.561.241.090.754.154.154.153.503.102.793.083.252.52


3⁄4 x 1⁄21 x 1⁄21 x 3⁄411⁄2 x 1⁄211⁄2 x 3⁄411⁄2 x 12 x 1⁄22 x 3⁄42 x 12 x 11⁄221⁄2 x 1⁄221⁄2 x 3⁄421⁄2 x 121⁄2 x 11⁄221⁄2 x 2

19.1 x 12.725.4 x 12.725.4 x 19.138.1 x 12.738.1 x 19.138.1 x 25.450.8 x 12.750.8 x 19.150.8 x 25.450.8 x 38.163.5 x 12.763.5 x 19.163.5 x 25.463.5 x 38.163.5 x 50.8

221⁄2231⁄23351⁄255371⁄27753

50.863.550.888.976.276.2

139.7127.0127.076.2

190.5177.8177.8127.076.2

0.220.230.240.260.260.290.650.700.700.400.950.800.800.630.53

32-14MO – ECCENTRIC REDUCER


3 x 1⁄23 x 3⁄43 x 13 x 11⁄23 x 23 x 21⁄24 x 1⁄24 x 3⁄44 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 36 x 4

76.2 x 12.776.2 x 19.176.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 101.6

91⁄299953135⁄8131⁄8131⁄8111⁄891⁄871⁄851⁄871⁄453⁄8

241.3228.6228.6228.6127.076.2

346.1333.4333.4282.6231.8181.0130.2184.2136.5

2.702.562.562.561.090.754.154.154.153.503.102.793.083.202.52


3⁄4 x 1⁄21 x 1⁄21 x 3⁄411⁄2 x 1⁄211⁄2 x 3⁄411⁄2 x 12 x 1⁄22 x 3⁄42 x 12 x 11⁄221⁄2 x 1⁄221⁄2 x 3⁄421⁄2 x 121⁄2 x 11⁄221⁄2 x 2


221⁄2231⁄23351⁄255371⁄27753

50.863.550.888.976.276.2

139.7127.0127.076.2

190.5177.8177.8127.076.2

.22

.23

.24

.26

.26

.29

.65

.70

.70

.40

.95

.80

.80

.63

.53

C

D E


14-WLMO – TANK WELDING SPUD (Light)

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

3333446

76.276.276.276.2

101.6101.6152.4

0.8701.3701.8702.3702.8703.8345.782

22.134.847.560.272.997.4

146.9

1.0001.5002.0002.5003.0004.0006.000

25.438.150.863.576.2

101.6152.4

0.160.210.400.540.771.252.32

INDUSTRIAL

KWIK

CLAMP

FITTINGS

18

ADAPTERS

304 s/s or 316L s/s

A Swagelok Company

Butt

Weld

Fittings

19

BUTT

WELD

FITTINGS

20

Jensen has crafted stainless steel sanitary butt weld fittings since 1959 for the Brewery, Winery,

Beverage, Food, Dairy and Pharmaceutical industries. Dimensions shown in this catalog are to standards

accepted by the industry.

Sanitary fittings, crevice free and smooth bored are made to tube

outside diameter dimensions and should not be confused with

nominal pipe size. To identify existing line sizes measure the

diameter to the outside as your reference.

These butt weld fittings are manufactured to close tolerances to permit fast and easy installation of crevice free,

fully sanitary and corrosion resistant process lines. All welds used in manufacturing are of the Tungsten Inert

Gas Method for true fusion of wall with no thinning or pitting. Availability is in Type 304 & 316L stainless steel.

Heat traceability is available on all 316L fittings, if specified at the time of order.

Jensen offers four finishes to suit your needs. The following should be referred to and the appropriate code

number used when ordering.

Code Finish1 NOT POLISHED, MILL FINISH3 32 Ra ID POLISHED, NOT POLISHED OD5 NOT POLISHED ID, POLISHED 32 Ra OD7 32 Ra ID POLISHED, 32 Ra OD POLISHED

21

BUTT

WELD

FITTINGS

J2SX – 90˚ ELLSIZE A NOM.WALL(TUBE O.D.) THICKNESS

in. mm in. mm

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

11⁄221⁄4333⁄441⁄269

38.157.276.295.3

114.3152.4228.6

.065

.065

.065

.065

.065

.065

.083

SIZE A NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

21⁄16

215⁄16

41⁄16

53⁄16

65⁄16

85⁄16

52.474.6

103.2131.7160.3211.1

.065

.065

.065

.065

.065

.083

J2S – 90˚ TUBE BEND

SIZE A B NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm in. mm

J2CM – KWIK CLAMP ONE END

111⁄2221⁄234

25.438.150.863.576.2

101.6

21⁄16

215⁄16

41⁄16

53⁄16

65⁄16

85⁄16

52.474.6

103.2131.7160.3211.1

29⁄16

37⁄16

49⁄16

511⁄16

613⁄16

815⁄16

65.187.3

115.9144.4173.0227.0

.065

.065

.065

.065

.065

.083

SIZE A B D NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm in. mm in. mm

J2F 90˚ SWEEP ELL

111⁄2221⁄234

25.438.150.863.576.2

101.6

21⁄16

215⁄16

41⁄16

53⁄16

65⁄16

85⁄16

52.474.6

103.2134.9160.3211.1

23⁄4321⁄32

425⁄32

61⁄32

77⁄32

917⁄32

69.992.9

121.4153.2183.3242.1

111⁄2221⁄234

25.438.150.863.576.2

101.6

.065

.065

.065

.065

.065

.083

SIZE A NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

13⁄16

15⁄825⁄16

3311⁄16

413⁄16

30.1

41.3

58.7

.065

.065

.065

.065

.065

.083

J2KS – 45˚ TUBE BEND

A

A

A

B

A

A

DB

A

A

22

BUTT

WELD

FITTINGS

SIZE C D NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm in. mm

J2KM – 45˚ TUBE BEND KWIK CLAMP ONE END

111⁄2221⁄234

25.438.150.863.576.2

101.6

111⁄16

21⁄8213⁄16

31⁄243⁄16

57⁄16

42.854.071.488.9

106.3138.1

.065

.065

.065

.065

.065

.083

13⁄16

15⁄825⁄16

3311⁄16

413⁄16

30.141.358.776.293.6

122.2


J2K – 45˚ TUBE BEND THREADED ONE END

111⁄2221⁄234

25.438.150.863.576.2

101.6

17⁄8211⁄32

31⁄32

327⁄32

419⁄32

61⁄32

47.659.577.097.6

116.7153.2

.065

.065

.065

.065

.065

.083

13⁄16

15⁄825⁄16

3311⁄16

413⁄16

30.141.358.776.293.6

122.2


J2P – 45˚ TUBE BEND PLAIN ONE END

111⁄2221⁄234

25.438.150.863.576.2

101.6

17⁄8211⁄32

31⁄32

327⁄32

419⁄32

61⁄32

47.659.577.097.6

116.7153.2

.065

.065

.065

.065

.065

.083

13⁄16

15⁄825⁄16

3311⁄16

413⁄16

30.141.358.776.293.6

122.2

SIZE B NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

17⁄821⁄43331⁄437⁄8

47.657.276.276.282.698.4

.065

.065

.065

.065

.065

.083

J9W – CROSS

SIZE B NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

17⁄821⁄43331⁄437⁄8

47.657.276.276.282.698.4

.065

.065

.065

.065

.065

.083

J7W – TEE

C

D

C

D

C

D

F

F

E

B

B

B B

23

BUTT

WELD

FITTINGS

J7WR – REDUCING TEESIZE A AA NOM.WALL(TUBE O.D.) THICKNESS


11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 X 36 X 4

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x101.6

21⁄43333331⁄431⁄431⁄431⁄437⁄837⁄837⁄837⁄837⁄855

57.276.276.276.276.276.282.682.682.682.698.498.498.498.498.4

127.0127.0

21⁄823⁄821⁄223⁄423⁄431⁄431⁄8331⁄231⁄435⁄835⁄8433⁄433⁄443⁄447⁄8

54.060.363.569.969.982.679.476.288.982.692.192.1

101.695.395.3

120.7123.8

0.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.0830.1090.109

SIZE B C NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm in. mm

J7WWM – KWIK CLAMP TEE

111⁄2221⁄234

25.438.150.863.576.2

101.6

15⁄825⁄32

29⁄16

227⁄32

33⁄32

41⁄16

41.354.865.172.278.6

103.2

.065

.065

.065

.065

.065

.083

11⁄8121⁄32

21⁄16

211⁄32

219⁄32

37⁄16

28.642.152.459.565.987.3

SIZE A B C NOM.WALL(TUBE O.D.) THICKNESSin. mm in. mm in. mm in. mm

J31 – CONCENTRIC REDUCER


38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 25.4152.4 x 38.1152.4 x 50.8152.4 x 63.5152.4 x 76.2152.4 x101.6

24264286421210864141210864

50.8101.650.8

152.4101.650.8

203.2152.4101.650.8

304.8254.0203.2152.4101.6355.6304.8254.0203.2152.4101.6

11⁄22221⁄221⁄221⁄2333344444666666

38.150.850.863.563.563.576.276.276.276.2

101.6101.6101.6101.6101.6152.4152.4152.4152.4152.4152.4

1111⁄2111⁄22111⁄2221⁄2111⁄2221⁄23111⁄2221⁄234

25.425.438.125.438.150.825.438.150.863.525.438.150.863.576.225.438.150.863.576.2

101.6

0.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.0830.1090.1090.1090.1090.1090.109

A

CB

C

B B

AA

A A

24

BUTT

WELD

FITTINGS


J32 – ECCENTRIC REDUCER


38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 25.4152.4 x 38.1152.4 x 50.8152.4 x 63.5152.4 x 76.2152.4 x101.6

24264286421210864141210864

50.8101.650.8

152.4101.650.8

203.2152.4101.650.8

304.8254.0203.2152.4101.6355.6304.8254.0203.2152.4101.6

11⁄22221⁄221⁄221⁄2333344444666666

38.150.850.863.563.563.576.276.276.276.2

101.6101.6101.6101.6101.6152.4152.4152.4152.4152.4152.4

1111⁄2111⁄22111⁄2221⁄2111⁄2221⁄23111⁄2221⁄234

25.425.438.125.438.150.825.438.150.863.525.438.150.863.576.225.438.150.863.576.2

101.6

0.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.0830.1090.1090.1090.1090.1090.109

J31P – CONCENTRIC REDUCER ONE END PLAINSIZE A C NOM.WALL(TUBE O.D.) THICKNESS



38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

211⁄16

423⁄32

223⁄32

627⁄32

427⁄32

227⁄32

829⁄32

629⁄32

429⁄32

229⁄32

137⁄32

117⁄32

97⁄32

77⁄32

57⁄32

68.2119.869.0

173.8123.072.2

226.2175.4124.673.8

335.7284.9234.1183.3132.5

1111⁄2111⁄22111⁄2221⁄2111⁄2221⁄23

25.425.438.125.438.150.825.438.150.863.525.438.150.863.576.2

0.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.083

J32P – ECCENTRIC REDUCER ONE END PLAINSIZE A C NOM.WALL(TUBE O.D.) THICKNESS



38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

211⁄16

423⁄32

223⁄32

627⁄32

427⁄32

227⁄32

829⁄32

629⁄32

429⁄32

229⁄32

137⁄32

117⁄32

97⁄32

77⁄32

57⁄32

68.2119.869.0

173.8123.072.2

226.2175.4124.673.8

335.7284.9234.1183.3132.5

1111⁄2111⁄22111⁄2221⁄2111⁄2221⁄23

25.425.438.125.438.150.825.438.150.863.525.438.150.863.576.2

0.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.083

A

CB

A

C

C

A

25

BUTT

WELD

FITTINGS

J31M – CONCENTRIC REDUCER KWIK CLAMPSIZE A C NOM.WALL(TUBE O.D.) THICKNESS



38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

21⁄241⁄221⁄261⁄241⁄221⁄281⁄261⁄241⁄221⁄2125⁄8105⁄885⁄865⁄845⁄8

63.5114.363.5

165.1114.363.5

215.9165.1114.363.5

320.7269.9219.1168.3117.5

1111⁄2111⁄22111⁄2221⁄2111⁄2221⁄23

25.425.438.125.438.150.825.438.150.863.525.438.150.863.576.2

0.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.083

J32M – ECCENTRIC REDUCER KWIK CLAMPSIZE A C NOM.WALL(TUBE O.D.) THICKNESS



38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

21⁄241⁄221⁄261⁄241⁄221⁄281⁄261⁄241⁄221⁄2125⁄8105⁄885⁄865⁄845⁄8

63.5114.363.5

165.1114.363.5

215.9165.1114.363.5

320.7269.9219.1168.3117.5

1111⁄2111⁄22111⁄2221⁄2111⁄2221⁄23

25.425.438.125.438.150.825.438.150.863.525.438.150.863.576.2

0.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.083

J28BW – TRUE YSIZE A NOM.WALL(TUBE O.D.) THICKNESS

in. mm in. mm1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

223345688

50.850.876.276.2

101.6127.0152.4203.2203.2

0.0650.0650.0650.0650.0650.0650.0650.0800.109

C

A

C

A

A

A

26

BUTT

WELD

FITTINGS


J28WA – LATERAL YAND J28WAR REDUCING LATERAL Y


12.719.125.438.150.863.576.2


101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

66673⁄883⁄410103⁄41213⁄16

161⁄26673⁄873⁄873⁄883⁄483⁄483⁄483⁄41010101010103⁄4103⁄4103⁄4103⁄4103⁄4103⁄41213⁄16

1213⁄16

1213⁄16

1213⁄16

1213⁄16

1213⁄16

1213⁄16

152.4152.4152.4187.3222.3254.0273.1325.4419.1152.4152.4187.3187.3187.3222.3222.3222.3222.3254.0254.0254.0254.0254.0273.1273.1273.1273.1273.1273.1325.4325.4325.4325.4325.4325.4325.4

55563⁄16

71⁄881⁄287⁄8103⁄4121⁄25563⁄16

63⁄16

63⁄16

71⁄871⁄871⁄871⁄881⁄281⁄281⁄281⁄281⁄287⁄887⁄887⁄887⁄887⁄887⁄8103⁄4103⁄4103⁄4103⁄4103⁄4103⁄4103⁄4

127.0127.0127.0157.1181.0215.9225.4273.1317.5127.0127.0157.1157.1157.1181.0181.0181.0181.0215.9215.9215.9215.9215.9225.4225.4225.4225.4225.4225.4273.1273.1273.1273.1273.1273.1273.1

11113⁄16

15⁄811⁄217⁄821⁄16

41113⁄16

13⁄16

13⁄16

15⁄815⁄815⁄815⁄811⁄211⁄211⁄211⁄211⁄217⁄817⁄817⁄817⁄817⁄817⁄821⁄16

21⁄16

21⁄16

21⁄16

21⁄16

21⁄16

21⁄16

25.425.425.430.141.338.147.652.4

101.625.425.430.130.130.141.341.341.341.338.138.138.138.138.147.647.647.647.647.647.652.452.452.452.452.452.452.4

0.0650.0650.0650.0650.0650.0650.0650.0830.1090.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0650.0830.0830.0830.0830.0830.0830.083


14WHR – BUTT WELD RUBBER HOSE ADAPTER

1⁄23⁄4111⁄2221⁄234

12.719.125.438.150.863.576.2

101.6

1.5001.5001.6881.6882.3122.0003.0933.406

38.138.142.942.958.750.878.686.5

0.5310.7811.0311.5312.0312.5313.0314.031

13.519.826.238.951.664.377.0

102.4

0.040.060.090.130.200.250.310.56

B

CA

A Swagelok Company

27

Bio-Pharm

Fittings

• Swagelok TS• Sanitary Clamp Connections

28

BIO

PHARM

FITTINGS

Jensen is producing its Bio-Pharm Fittings to the ASME-BPE standard. All products are marked with the corresponding heat number(s), the ASME-BPE Spec, internal surface symbol for the appropriateBPE specification, grade of material, plus manufacturer markings (JF).

This allows for full identification and traceability while providing a low cost, quality fitting to the BPEspecifications. Our pharmaceutical (TL/AWF) product line is available in 1/2"(12.7mm) through6"(152.4mm) in 316L stainless steel. Each fitting undergoes an intensive quality control process to

ensure all specifications of the order are met. This conforms to our ISO 9002 registered program.

Materials Test Reports are included with all extended tangent and Optional Finish material. We include a set of M.T.R.'s with your shipment of material and a set with your invoice. All heat numbers are includedon all barcode labels, packing slips, and invoices for easy comparison to the fittings, including multiple heat numbers if it is a complex fitting.

29

BIO

PHARM

FITTINGS

Jensen offers four finishes on bio-pharm fittings to suit your needs. The following should be referred to and the appropriate code number used when ordering.

Swagelok TS fitting finishes indicated on page 30.

Code BPE Code Finish

3 PC SFF1 20 Ra Max ID Polished,Not Polished OD

7 PL SFF1 20 Ra Max ID Polished,32 Ra OD Polished

3 PD SFF4 15 Ra Max ID Polished and IDElectropolished, Not Polished

7 PD SFF4 15 Ra Max ID Polished and IDElectropolished, 32 Ra OD Polished

30

BIO

PHARM

FITTINGS

Sanitary Fittings

Crown

Expansionspace

Rib

Features

Swagelok TS Series ISO 2852

Metal-to-metal stop

Temperature Ratings

Technical Data

Design Specifications� TS series 316L stainless steel ferrules meet

ASME- BPE and 3-A requirements.

� Short ferrules meet ASME-BPE with the exception of overall length.

Internal Surface Finish� Mechanical finish (designator SFF1):

20 µin. max Ra according to ASME-BPE.

� Electropolished finish (designator SFF4): 15 µin. max Ra according to ASME-BPE.

External Surface Finish� 64 µin. Ra

Material SpecificationsAll wetted components are traceable. Ferrules are heat trace-able, while gasket materials are lot traceable.

CleaningFerrules and clamps are cleaned to ensure components are freeof burrs, chips, loose particles, oil, grease, and other contami-nants. Electropolished ferrules are passivated.

Materials of Construction

Item Material Specification

Ferrules 316L stainless steel ASME BPE3-A 63-02

Clamps 304 stainless steel ISO 2852

Gaskets

FDA-21CFR177.15503-A 20-20PTFE

FDA-21CFR177.2660 3-A 18-03

ISO 10993 part 5 (cytotoxicity test),

USP 23, Section 88, Class VI

EPDM

Swagelok TS Series Sanitary FittingsSwagelok TS series sanitary fittings are designed to solveproblems inherent in conventional ISO 2852 sanitary fittings: gasket extrusion and the resulting fluid holdup. During assembly,the metal-to-metal stop of the TS series sanitary ferrules preventsovertightening and controls gasket compression. Another benefitof a metal-to-metal stop is its inherent ability to maintain a borelineseal by restricting ferrule movement. The unique design of the TS series controls gasket extrusion and deformation under avariety of operating conditions including thermal cycling. As aresult, systems drain better, clean faster, sterilize more easily, and improve yields.Conventional ISO 2852 sanitary fittings utilize a design that, when tightened, allows the gasket to extrude into the boreline ofprocess piping and creates a barrier that holds up fluids. This fluidholdup may require longer cleaning cycles, making sterilization andvalidation more difficult.

TS Series Highlights� Virtually eliminates fluid holdup. Because of its boreline seal

design and metal-to-metal stop, gasket compression is controlledand ferrule movement is restricted at both ambient and elevatedtemperatures. The result is virtually no fluid holdup.

� Improved drainability/cleanability. Improved drainability andcleanability are ensured by the dramatic reduction of fluid holdup.

� Leak-tight performance. The assembly remains leak-tightthroughout the range of temperature ratings.

� Easy assembly. TS series elastomer gaskets utilize aninterference fit that allows the TS series ferrule to "capture" theself-aligning gasket, making assembly of the mating ferrule andclamp easier than that of conventional ISO 2852 fittings.

� Flexibility and adaptability. A TS series adapter gasket isavailable. It allows an existing ISO 2852 ferrule to mate with a TS series ferrule while providing some advantages of acomplete TS connection.

Material Rating, °F (°C)

PTFE 60 to 275 (15 to 135)

EPDM -50 to 275 (-46 to 135)

Vacuum Testing

Gasket Material Vacuum Rating

EPDM10-3 Torr

Fluorocarbon (FKM)

Fluorocarbon (FKM) -10 to 350 (-23 to 177)

The metal-to-metal stop acts as a built-in gage to allow precise,controlled gasket compression.The rib creates a boreline seal.The crown holds the gasket in place, centering the rib over thesealing area. During thermal cycling, the crown directs expansionto the space provided.

Fluorocarbon➀ (FKM)

➀ Equivalent to DuPont Viton®

31

BIO

PHARM

FITTINGS

Sanitary FittingsPressurePressure ratings are based upon testsconducted using a 2-piece clamp for 1/2 and 3/4 in. fittings and a 3-piececlamp for 1 through 4 in. fittings.Note: Pressure ratings for connectionsutilizing an adapter gasket or any other manufacturer’s component default to the lowest pressure rating of the components.

Dimensions/Ordering Information

H

BET

H

BET

H

BNote: 1/2 and 3/4 in. OD fer-rules, cap and clamp are basedon commonly available fittingassemblies (25mm), not ISO2852 (34mm).

Dimensions for reference only,subject to change.

Fitting Size

in. (mm)

PTFE 1⁄2 to 2 (12.7 to 50.8) 200 (13.8)

EPDM

FKM

1⁄2 (12.7)

300 (20.5)

at 275°F (135°C)

3⁄4 (19.1)

1 (25.4)

21⁄2 (63.5)

11⁄2 (38.1)

2 (50.8)

3 (76.2)(

2800 (192)

0200 (13.8)

3100 (213)

at 70°F (20°C)

650 (44.7)

0450 (31.0)

1200 (82.6)

0350 (24.1)

4 (101.6) 0200 (13.8)

Tube OD in. (mm)

Basic Ordering Number

Dimensions, in. (mm)

B E H T1⁄2 (12.7) 316L-8TS-S-

0.98 (24.9)0.37 (9.4)

0.50(12.7)

0.50 (12.7)

3⁄4 (19.1) 316L-12TS-S- 0.62 (15.7) 0.75 (19.1)

1 (25.4) 316L-16TS-S-1.98 (50.3)

0.87 (22.1) 1.00 (25.4)

11⁄2 (38.1) 316L-24TS-S- 1.37 (34.8) 1.50 (38.1)

2 (50.8) 316L-32TS-S- 2.52 (64.0) 1.87 (47.5) 2.00 (50.8)

Short Ferrules(0.065 in. wall)

How to OrderSelect a Basic Ordering Number. Add internal surface finish designator to the Basic Ordering Number.

Standard Ferrules(0.065 in. wall)

Caps

Tube OD in. (mm)



B E H T1⁄2 (12.7) 316L-8TS-L-

0.98 (24.9)0.37 (9.4)

1.75 (44.4)

0.50 (12.7)

3⁄4 (19.1) 316L-12TS-L- 0.62 (15.7) 0.75 (19.1)

1 (25.4) 316L-16TS-L-1.98 (50.3)

0.87 (22.1) 1.00 (25.4)

11⁄2 (38.1) 316L-24TS-L- 1.37 (34.8) 1.50 (38.1)

2 (50.8) 316L-32TS-L- 2.52 (64.0) 1.87 (47.5) 2.00 (50.8)

2.25 (57.2)

4 (101.6)316L-64TS-L-(0.083 in. wall) 4.68 (118.9) 3.83 (97.3) 4.00 (101.6)

3 (76.2) 316L-48TS-L- 3.58 (90.9) 2.87 (72.9) 3.00 (76.2)

21⁄2 (63.5) 316L-40TS-L- 3.05 (77.5) 2.37 (60.2) 2.50 (63.5)

Tube OD in. (mm)



B H1⁄2 (12.7) 316L-8TS-C-

0.25 (6.4)

3⁄4 (19.1) 316L-12TS-C-

1 (25.4) 316L-16TS-C-

11⁄2 (38.1) 316L-24TS-C-

2 (50.8) 316L-32TS-C-

21⁄2 (63.5) 316L-40TS-C-➁

3 (76.2) 316L-48TS-C-➁

4 (101.6) 316L-64TS-C-➁

0.98 (24.9)

3.58 (90.9)

2.52 (64.0)

1.98 (50.3)

3.05 (77.5)

4.68 (118.9)

200 (13.8) 200 (13.8) (FKM only)

N/A

300 (20.5)(FKM only)

at 350°F (177°C)

Pressure, psig (bar)

➁ 2 1/2 to 4 in. TS caps are not made according to ASME-BPE material specifications.

316L – 8TS – S – SFF1

Internal Surface Finish DesignatorSFF1 Mechanical Finish (20 µin. max Ra) according to ASME BPESFF4 Electropolish Finish (15 µin. max Ra) according to ASME BPE

Overall Length DesignatorS 0.50 in. (12.7 mm), 1/2 to 2 in. ODL 1.75 in. (44.4 mm), 1/2 to 1 1/2 in. OD

2.25 in. (57.2 mm), 2 to 4 in. OD

TS Series Size Designator, inches8TS 1/2 32TS 2

12TS 3/4 40TS 2 1/216TS 1 48TS 324TS 1 1/2 64TS 4

Material Designator316L 316L Stainless Steel

GasketMaterial

32

BIO

PHARM

FITTINGS

The following validation documentation can be provided upon request:� Certified Mill Test Reports� Certification of compliance to specifications� Certification of compliance to CFR Title #21 section 177� Quality assurance manual� ISO 9001 certification

Welding� Note: Manual welding is not recommended for short ferrules.

Welding caution: Excess heat may alter the ferrule shape and affect seal integrity.

� Please contact your Swagelok representative for additionalinformation on recommended welding practices.

Gaskets Adapter Gaskets

Options and Accessories

TS series adapter gaskets provide an easy method of transitionbetween ISO 2852 and TS systems. This gasket is designed with a different profile on each face; one profile accommodates the ISO 2852 ferrule and the other fits the TS series ferrule.

Wing Nut Tightening ToolThe Swagelok wing nut tightening tool simplifies thetask of tightening and untightening wing nuts. It canalso protect individuals from hot wing nuts.

MaterialSizein.

Ordering Number

PTFE(white)

1⁄2 (12.7) TM-8TS-G

EPDM(black)

3⁄4 (19.1) TM-12TS-G1 (25.4) TM-16TS-G

11⁄2 (38.1) TM-24TS-G2 (50.8) TM-32TS-G1⁄2 (12.7) EP-8TS-G3⁄4 (19.1) EP-12TS-G1 (25.4) EP-16TS-G

11⁄2 (38.1) EP-24TS-G2 (50.8) EP-32TS-G

21⁄2 (63.5) EP-40TS-G3 (76.2) EP-48TS-G4 (101.6) EP-64TS-G

Ordering Number

NY-TS-TL

FKM(brown)

21⁄2 (63.5) VT-40TS-G

1⁄2 (12.7) VT-8TS-G3⁄4 (19.1) VT-12TS-G

3 (76.2)

1 (25.4) VT-16TS-G

VT-48TS-G

11⁄2 (38.1) VT-24TS-G2 (50.8) VT-32TS-G

4 (101.6) VT-64TS-G

MaterialSizein.

Ordering Number

PTFE(white)

1⁄2 (12.7) TM-8TS-GA

EPDM(black)

3⁄4 (19.1) TM-12TS-G1 (25.4) TM-16TS-GA

11⁄2 (38.1) TM-24TS-GA2 (50.8) TM-32TS-GA1⁄2 (12.7) EP-8TS-GA3⁄4 (19.1) EP-12TS-G1 (25.4) EP-16TS-GA

11⁄2 (38.1) EP-24TS-GA2 (50.8) EP-32TS-GA

21⁄2 (63.5) EP-40TS-GA3 (76.2) EP-48TS-GA4 (101.6) EP-64TS-GA

FKM(brown)

21⁄2 (63.5) VT-40TS-GA

1⁄2 (12.7) VT-8TS-GA3⁄4 (19.1) VT-12TS-G

3 (76.2)

1 (25.4) VT-16TS-GA

VT-48TS-GA

11⁄2 (38.1) VT-24TS-GA2 (50.8) VT-32TS-GA

4 (101.6) VT-64TS-GA

33

BIO

PHARM

FITTINGS

The following configurations represent sanitary connections and are identified by thenumber at the top of each table. These same fittings with the same dimensions are also availablewith the Swagelok TS fitting. Please consult your local Swagelok distributor.

SIZE A B(TUBE O.D.)in. mm in. mm in. mm

JTL2CM – KWIK CLAMP ONE END 90˚ ELBOW

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

3.003.003.003.754.755.506.258.00

11.50

76.276.276.295.3

120.7139.7158.8203.2292.1

1.621.622.002.753.504.255.006.62

10.50

41.141.150.869.988.9

108.0127.0168.1266.7


JTL2KM – KWIK CLAMP ONE END 45˚ ELL

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

2.252.252.252.503.003.373.624.506.25

57.257.257.263.576.285.691.9

114.3158.8

1.001.001.121.441.752.062.383.125.25

25.425.428.436.644.552.360.579.2

133.4

A

A

A

A

BPE - Table # DT-7

BPE - Table # DT-12

BPE - Table # DT-8

BPE - Table # DT-13

SIZE A(TUBE O.D.)in. mm in. mm

JTL2S – 90 ̊TANGENT ELBOW

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

3.003.003.003.754.755.506.258.00

11.50

76.276.276.295.3

120.7139.7158.8203.2292.1


JTL2KS – 45 ̊TANGENT ELL

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

2.252.252.252.503.003.373.624.506.25

57.257.257.263.576.285.691.9

114.3158.8

A

B

A

B

34

BIO

PHARM

FITTINGS

SIZE B C(TUBE O.D.)in. mm in. mm in. mm

JTL7WWM – KWIK CLAMP TANGENT TEE

1⁄23⁄4111⁄2221⁄234

12.719.125.438.150.863.576.2

101.6

1.872.002.122.372.873.123.374.12

47.550.853.860.272.979.285.6

104.6

2.372.502.622.873.373.623.874.75

60.263.566.572.985.691.998.3

120.7


JTL7WMS – KWIK CLAMP TANGENT TEE SHORT

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

1.872.002.122.372.873.123.374.125.62

47.550.853.860.272.979.285.6

104.6142.7

1.001.121.121.371.621.872.122.754.62

25.428.428.434.841.147.553.869.9

117.3

A

B

B B

BPE - Table # DT-15

BPE - Table # DT-22

BPE - Table # DT-9


JTL14AM7 – TANGENT FERRULE

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

1.751.751.751.752.252.252.252.253.00

44.544.544.544.557.257.257.257.276.2

SIZE B(TUBE O.D.)in. mm in. mm

JTL7W – TANGENT TEE

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

1.872.002.122.372.873.123.374.125.62

47.550.853.860.272.979.285.6

104.6142.7

C

BB

A

B

A

35

BIO

PHARM

FITTINGS

SIZE B C(TUBE O.D.)in. mm in. mm in. mm

JTL7RWMS – TANGENT REDUCING TEE SHORT

3⁄4 x 1⁄21 x 1⁄21 x 3⁄411⁄2 x 1⁄211⁄2 x 3⁄411⁄2 x 12 x 1⁄22 x 3⁄42 x 12 x 11⁄221⁄2 x 1⁄221⁄2 x 3⁄421⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 1⁄23 x 3⁄43 x 13 x 11⁄23 x 23 x 21⁄24 x 1⁄24 x 3⁄44 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 4

19.1 x 12.725.4 x 12.725.4 x 19.138.1 x 12.738.1 x 19.138.1 x 25.450.8 x 12.750.8 x 19.150.8 x 25.450.8 x 38.163.5 x 12.763.5 x 19.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 12.776.2 x 19.176.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 101.6

2.002.122.122.372.372.372.872.872.872.873.123.123.123.123.123.373.373.373.373.373.374.124.124.124.124.124.124.125.63

50.853.853.860.260.260.272.972.972.972.979.279.279.279.279.285.685.685.685.685.685.6

104.6104.6104.6104.6104.6104.6104.6143.0

1.001.121.121.371.371.371.621.621.621.621.871.871.871.871.872.122.122.122.122.122.122.622.622.622.622.622.622.623.75

25.428.428.434.834.834.841.141.141.141.147.547.547.547.547.553.853.853.853.853.853.866.566.566.566.566.566.566.595.3

BPE - Table # DT-14

BPE - Table # DT-30

A


JTL16W – TANGENT CAP

1⁄23⁄4111⁄2221⁄234

12.719.125.438.150.863.576.2

101.6

1.501.501.502.062.502.812.873.25

38.138.138.152.363.571.472.982.6

B

C

B

36

BIO

PHARM

FITTINGS


JTL7RWWM – TANGENT REDUCING TEE LONG

3⁄4 x 1⁄21 x 1⁄21 x 3⁄411⁄2 x 1⁄211⁄2 x 3⁄411⁄2 x 12 x 1⁄22 x 3⁄42 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

19.1 x 12.725.4 x 12.725.4 x 19.138.1 x 12.738.1 x 19.138.1 x 25.450.8 x 12.750.8 x 19.150.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

2.002.122.122.372.372.372.872.872.872.873.123.123.123.373.373.373.374.124.124.124.124.12

50.853.853.860.260.260.272.972.972.972.979.279.279.285.685.685.685.6

104.6104.6104.6104.6104.6

2.502.622.622.872.872.873.123.123.123.123.373.373.373.623.623.623.624.254.254.504.504.50

63.566.566.572.972.972.979.279.279.279.285.685.685.691.991.991.991.9

108.0108.0114.3114.3114.3

SIZE A AA(TUBE O.D.)in. mm in. mm in. mm

JTL7RW v TANGENT REDUCING TEE



101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 101.6

2.002.122.122.372.372.372.872.872.872.873.123.123.123.123.123.373.373.373.373.373.374.124.124.124.124.124.124.125.62

50.853.853.860.260.260.272.972.972.972.979.279.279.279.279.285.685.685.685.685.685.6

104.6104.6104.6104.6104.6104.6104.6142.7

2.002.122.122.372.372.372.622.622.622.622.872.872.872.872.873.123.123.123.123.123.123.623.623.623.623.873.873.875.12

50.853.853.860.260.260.266.566.566.566.572.972.972.972.972.979.279.279.279.279.279.291.991.991.991.998.398.398.3

130.0

BPE - Table # DT-10

B

A

AA

AA

A

37

BIO

PHARM

FITTINGS


JTL31MJTL32M – KWIK CLAMP TANGENT REDUCERS

3⁄4 x 1⁄21 x 1⁄21 x 3⁄411⁄2 x 1⁄211⁄2 x 3⁄411⁄2 x 12 x 1⁄22 x 3⁄42 x 12 x 11⁄221⁄2 x 1⁄221⁄2 x 3⁄421⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 4

19.1 x 12.725.4 x 12.725.4 x 19.138.1 x 12.738.1 x 19.138.1 x 25.450.8 x 12.750.8 x 19.150.8 x 25.450.8 x 38.163.5 x 12.763.5 x 19.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 101.6

3.003.503.004.504.004.006.506.006.004.008.508.008.006.004.25

10.008.006.254.25

14.1312.1310.378.376.379.00

76.288.976.2

114.3101.6101.6165.1152.4152.4101.6215.9203.2203.2152.4108.0254.0203.2158.8108.0358.9308.1263.4212.6161.8228.6


JTL31JTL32 – TANGENT REDUCERS



101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 101.6

4.004.504.005.505.005.007.757.257.255.259.759.259.257.255.50

11.259.257.505.50

15.5013.5011.759.757.75

10.00

101.6114.3101.6139.7127.0127.0196.9184.2184.2133.4247.7235.0235.0184.2139.7285.8235.0190.5139.7393.7342.9298.5247.7196.9254.0

A

A

BPE - Table # DT-26

A

CB

B

A

C

BPE - Table # DT-11

38

BIO

PHARM

FITTINGS

SIZE E F(TUBE O.D.)in. mm in. mm in. mm

JTL9W – TANGENT CROSS

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

3.754.004.254.755.756.256.758.25

11.25

95.3101.6108.0120.7146.1158.8171.5209.6285.8

1.872.002.122.372.873.123.374.125.62

47.550.853.860.272.979.285.6

104.6142.7

BPE - Table # DT-9

F

E

E

F

39

BIO

PHARM

FITTINGS

TANGENT POINT OF USE

SIZE A B C D E APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm in. mm in. mm

3⁄4 x1⁄2

1 x 1⁄21 x 3⁄411⁄2 x 1⁄211⁄2 x 3⁄411⁄2 x 12 x 1⁄22 x 3⁄42 x 12 x 11⁄221⁄2 x 1⁄221⁄2 x 3⁄421⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 1⁄23 x 3⁄43 x 13 x 11⁄23 x 23 x 21⁄24 x 1⁄24 x 3⁄44 x 14 x 11⁄24 x 24 x 21⁄24 x 3


101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

4.504.504.506.006.006.006.006.006.006.007.507.507.507.507.509.009.009.009.009.009.00

12.0012.0012.0012.0012.0012.0012.00

114.3114.3114.3152.4152.4152.4152.4152.4152.4152.4190.5190.5190.5190.5190.5228.6228.6228.6228.6228.6228.6304.8304.8304.8304.8304.8304.8304.8

2.252.252.253.003.003.003.003.003.003.003.753.753.753.753.754.504.504.504.504.504.506.006.006.006.006.006.006.00

57.257.257.276.276.276.276.276.276.276.295.395.395.395.395.3

114.3114.3114.3114.3114.3114.3152.4152.4152.4152.4152.4152.4152.4

3.003.003.004.504.504.505.005.005.005.005.755.755.755.755.756.506.506.506.506.506.508.508.508.508.508.508.508.50

76.276.276.2

114.3114.3114.3127.0127.0127.0127.0146.1146.1146.1146.1146.1165.1165.1165.1165.1165.1165.1215.9215.9215.9215.9215.9215.9215.9

1.001.131.131.381.381.381.631.631.631.631.881.881.881.881.882.132.132.132.132.132.132.632.632.632.632.632.632.63

25.428.728.735.135.135.141.441.441.441.447.847.847.847.847.854.154.154.154.154.154.166.866.866.866.866.866.866.8

3.133.253.135.004.884.755.755.635.505.256.756.636.506.256.007.757.637.507.257.006.75

10.2510.1310.009.759.509.259.00

79.582.679.5

127.0124.0120.7146.1143.0139.7133.4171.5168.4165.1158.8152.4196.9193.8190.5184.2177.8171.5260.4257.3254.0247.7241.3235.0228.6

0.360.440.450.760.770.801.271.281.311.382.002.002.052.252.353.373.383.413.483.613.716.126.136.166.236.366.166.64

AB

C

JTL2UBO JTL2USO

**Not included ASME BPE.

40

BIO

PHARM

FITTINGS


INSTRUMENT TEE

1⁄2 x 11⁄2 BW3⁄4 x 11⁄2 BW1 x 11⁄2 BW1⁄2 x 2 BW3⁄4 x 2 BW1 x 2 BW11⁄2 x 2 BW

1⁄2 x 11⁄2 KC3⁄4 x 11⁄2 KC1 x 11⁄2 KC1⁄2 x 2 KC3⁄4 x 2 KC1 x 2 KC11⁄2 x 2 KC

12.7 x 38.1 BW19.1 x 38.1 BW25.4 x 38.1 BW12.7 x 50.8 BW19.1 x 50.8 BW25.4 x 50.8 BW38.1 x 50.8 BW

12.7 x 38.1 KC19.1 x 38.1 KC25.4 x 38.1 KC12.7 x 50.8 KC19.1 x 50.8 KC25.4 x 50.8 KC38.1 x 50.8 KC

5.005.005.005.505.505.505.50

6.006.006.006.506.506.506.50

127.0127.0127.0139.7139.7139.7139.7

152.4152.4152.4165.1165.1165.1165.1

0.881.001.131.001.131.251.50

0.881.001.131.001.131.251.50

22.425.428.725.428.731.838.1

22.425.428.725.428.731.838.1

Available in PL and PM Finishes only.Not included in ASME BPE.

A

B

A

B

JTL7IWMS

JC7IS

41

BIO

PHARM

FITTINGS


JC7 – TEE

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

2.252.372.622.873.373.623.874.757.13

57.260.266.572.985.691.998.3

120.7181.1

4.504.755.255.756.757.257.759.50

14.25

114.3120.7133.4146.1171.5184.2196.9241.3362.0


JC7S – SHORT OUTLET TEE

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

2.252.372.622.873.373.623.874.757.13

57.260.266.572.985.691.998.3

120.7181.1

1.001.121.121.371.621.872.122.754.62

25.428.428.434.841.147.553.869.9

117.3

A

A

R

BPE - Table # DT-16

A

A

BPE - Table # DT-17

A

A

B

BPE - Table # DT-18

A A

B

BPE - Table # DT-27


JC2 – 90 ̊ELL

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

1.621.622.002.753.504.255.006.62

10.50

41.141.150.869.988.9

108.0127.0168.1266.7

SIZE B(TUBE O.D.)in. mm in. mm

JC2K – 45 ̊ELL

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

1.001.001.121.441.752.062.383.125.25

25.425.428.436.644.552.360.579.2

133.4

42

BIO

PHARM

FITTINGS

SIZE OVERALL(TUBE O.D.) LENGTH

in. mm in. mm

JC31JC32 – CONCENTRIC REDUCER



101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 101.6

2.002.502.003.503.003.005.505.005.003.007.507.007.005.003.009.007.005.003.00

13.1211.129.127.125.127.63

50.863.550.888.976.276.2

139.7127.0127.076.2

190.5177.8177.8127.076.2

228.6177.8127.076.2

333.2282.4231.6180.8130.0193.8

SIZE A B C(TUBE O.D.)in. mm in. mm in. mm in. mm

JC7R – REDUCING TEE



101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 101.6

2.502.622.622.872.872.873.133.133.133.133.383.383.383.383.383.633.633.633.633.883.884.134.134.134.134.384.384.385.75

63.566.566.572.972.972.979.579.579.579.585.985.985.985.985.992.292.292.292.298.698.6

104.9104.9104.9104.9111.3111.3111.3146.1

2.502.622.622.872.872.873.373.373.373.373.633.633.633.633.633.873.873.873.873.873.874.754.754.754.754.754.754.757.13

63.566.566.572.972.972.985.685.685.685.692.292.292.292.292.298.398.398.398.398.398.3

120.7120.7120.7120.7120.7120.7120.7181.1

5.005.255.255.755.755.756.756.756.756.757.257.257.257.257.257.757.757.757.757.757.759.509.509.509.509.509.509.50

14.25

127.0133.4133.4146.1146.1146.1171.5171.5171.5171.5184.2184.2184.2184.2184.2196.9196.9196.9196.9196.9196.9241.3241.3241.3241.3241.3241.3241.3362.0

BPE - Table # DT-21

B

A

C

BPE - Table # DT-19

43

BIO

PHARM

FITTINGS


JC7RS – SHORT OUTLET REDUCED TEE



101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 101.6

2.502.622.622.872.872.873.373.373.373.373.633.633.633.633.633.873.873.873.873.873.874.754.754.754.754.754.754.757.13

63.566.566.572.972.972.985.685.685.685.692.292.292.292.292.298.398.398.398.398.398.3

120.7120.7120.7120.7120.7120.7120.7181.1

1.001.121.121.371.371.371.621.621.621.621.871.871.871.871.872.122.122.122.122.122.122.622.622.622.622.622.622.623.75

25.428.428.434.834.834.841.141.141.141.147.547.547.547.547.553.853.853.853.853.853.866.566.566.566.566.566.566.595.3

A

B

A

BPE - Table # DT-20


JC9 – CROSS

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

2.252.372.622.873.373.623.874.757.13

57.260.266.572.985.691.998.3

120.7181.1

4.504.755.255.756.757.257.759.50

14.25

114.3120.7133.4146.1171.5184.2196.9241.3362.0


JC16 – SOLID END CAP

1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

0.190.190.250.250.250.250.250.310.44

4.84.86.46.46.46.46.47.9

11.2

0.980.981.981.982.513.043.584.686.57

24.924.950.350.363.877.290.9

118.9166.9

AB

A

B

BPE - Table # DT-18

AB

Available in PL, PM, and Standard Finishes.

44

BIO

PHARM

FITTINGS


JC14AHR** – RUBBER HOSE ADAPTER

1⁄2 x 1⁄23⁄4 x 3⁄4

111⁄2221⁄234

12.7 x 12.719.1 x 19.1

25.438.150.863.576.2

101.6

1.501.501.691.692.312.003.093.41

38.138.142.942.958.750.878.586.6

0.530.781.031.532.032.533.034.03

13.519.826.238.951.664.377.0

102.4

SIZE C(TUBE O.D.)in. mm in. mm

JC21** – ADAPTERS

1⁄2 x 1⁄8*1⁄2 x 1⁄4*1⁄2 x 3⁄8*1⁄2 x 1⁄2*1⁄2 x 3⁄4*3⁄4 x 1⁄8*3⁄4 x 1⁄4*3⁄4 x 3⁄8*3⁄4 x 1⁄2*3⁄4 x 3⁄4*

111⁄2221⁄2*34

12.7 x 3.2*12.7 x 6.4*12.7 x 9.5*12.7 x 12.7*12.7 x 19.1*19.1 x 3.2*19.1 x 6.4*19.1 x 9.5*19.1 x 12.7*19.1 x 19.1*

25.438.150.863.5*76.2

101.6

2.002.002.002.002.002.002.002.002.002.002.252.442.663.283.503.81

50.850.850.850.850.850.850.850.850.850.857.262.067.683.388.996.8


JC22** – ADAPTERS

1⁄2 x 1⁄8*1⁄2 x 1⁄4*1⁄2 x 3⁄8*1⁄2 x 1⁄2*1⁄2 x 3⁄4*3⁄4 x 1⁄8*3⁄4 x 1⁄4*3⁄4 x 3⁄8*3⁄4 x 1⁄2*3⁄4 x 3⁄4*

111⁄2221⁄2*34

12.7 x 3.2*12.7 x 6.4*12.7 x 9.5*12.7 x 12.7*12.7 x 19.1*19.1 x 3.2*19.1 x 6.4*19.1 x 9.5*19.1 x 12.7*19.1 x 19.1*

25.438.150.863.5*76.2

101.6

1.251.501.501.501.621.251.501.501.501.621.622.252.342.092.192.66

31.838.138.138.141.131.838.138.138.141.141.157.259.453.155.667.6

C

C

D

D

* NO HEX CENTER** Not included in the ASME BPE standard, therefore, will

be marked with Material grade and heat number only.Available in PL, PM, and Standard Finishes.

A Swagelok Company

Sanitary

Acme Threaded

Fittings

45

46

SANITARY

ACME

THREADED

FITTINGS

Jensen has crafted stainless steel sanitary Acme Threaded fittings since 1959 for the Brewery, Winery,

Beverage, Food, Dairy and Pharmaceutical industries. Dimensions shown in this catalog are to standards

accepted by the industry.

Sanitary fittings, crevice free and smooth bored are made to tube

outside diameter dimensions and should not be confused with

nominal pipe size. To identify existing line sizes measure the

diameter to the outside as your reference.

These union nut assemblies with sanitary Acme threads permit easy assembly and safe fast cleaning of lines.

All welds used in manufacturing are of the Tungsten Inert Gas Method for true fusion of wall with no thinning

or pitting. Fittings with weld ends are manufactured to exact circularity tolerances and have true square butt

ends for on site T.I.G. installation. Availability is in Type 304 & 316L stainless steel.

2F-31 – 90˚ REDUCING ELBOW (Non-Tapered)SIZE A B APPROX.(TUBE O.D.) WT. LBS.



38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

23⁄16

23⁄16

231⁄32

23⁄16

231⁄32

323⁄32

23⁄16

231⁄32

323⁄32

419⁄32

23⁄16

231⁄32

323⁄32

419⁄32

513⁄32

55.555.575.455.575.494.455.575.494.4

116.755.575.494.4

116.7137.3

21⁄16

21⁄827⁄825⁄32

229⁄32

321⁄32

27⁄32

231⁄32

323⁄32

415⁄32

25⁄16

31⁄16

313⁄16

49⁄16

55⁄16

52.454.073.054.873.892.956.375.494.4

113.558.777.896.8

115.9134.9

0.750.951.201.101.351.451.501.751.952.252.302.452.652.953.50

2F-32 – 90˚ REDUCING ELBOW (Non-Tapered)SIZE A B APPROX.(TUBE O.D.) WT. LBS.



38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

23⁄16

23⁄16

231⁄32

23⁄16

231⁄32

323⁄32

23⁄16

231⁄32

323⁄32

419⁄32

23⁄16

231⁄32

323⁄32

419⁄32

513⁄32

55.555.575.455.575.494.455.575.494.4

116.755.575.494.4

116.7137.3

21⁄16

21⁄827⁄825⁄32

229⁄32

321⁄32

27⁄32

231⁄32

323⁄32

415⁄32

25⁄16

31⁄16

313⁄16

49⁄16

55⁄16

52.454.073.054.873.892.956.375.494.4

113.558.777.896.8

115.9134.9

0.750.951.201.101.351.451.501.751.952.252.302.452.652.953.50

B

A

B

A

47

SANITARY

ACME

THREADED

FITTINGS

2C – 90˚ SWEEP ELLSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄16

231⁄32

323⁄32

419⁄32

513⁄32

77⁄32

55.575.494.4

116.7137.3183.3

.30

.621.061.753.005.60

2E – 90˚ SWEEP ELLSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄16

231⁄32

323⁄32

419⁄32

513⁄32

77⁄32

55.575.494.4

116.7137.3183.3

.851.633.064.757.00

13.60

2F – 90˚ SWEEP ELLSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄16

231⁄32

323⁄32

419⁄32

513⁄32

77⁄32

55.575.494.4

116.7137.3183.3

.631.381.943.504.819.19


2P – 45˚ SWEEP ELL

111⁄2221⁄234

25.438.150.863.576.2

101.6

15⁄16

123⁄32

21⁄825⁄831⁄841⁄4

33.343.654.066.779.4

108.0

21⁄821⁄825⁄16

29⁄16

229⁄32

37⁄8

54.054.058.765.173.898.4

.501.001.692.944.007.56


7 – TEE

111⁄2221⁄234

25.438.150.863.576.2

101.6

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

.44

.881.382.063.195.00

A

A

A

A

A

A

B

A

AB

A

48

SANITARY

ACME

THREADED

FITTINGS


14WF – PLAIN SHORT WELD FERRULE

111⁄2221⁄234

25.438.150.863.576.2

101.6

11⁄1623⁄3223⁄3227⁄3229⁄32

17⁄32

17.418.218.221.423.030.9

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.100.100.200.310.430.69


14A – PLAIN TUBE FERRULE

111⁄2221⁄234

25.438.150.863.576.2

101.6

13⁄811⁄211⁄213⁄413⁄413⁄4

34.938.138.144.544.544.5

0.8701.3701.8702.3702.8703.834

22.134.847.560.272.997.4

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.060.250.370.570.690.81


14W – PLAIN FERRULE TANK SPUD (Heavy)

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄8217⁄32

225⁄32

31⁄16

317⁄32

45⁄16

60.364.370.677.889.7

109.5

0.8701.3701.8702.3702.8703.834

22.134.847.560.272.997.4

15⁄32

143⁄64

23⁄16

245⁄64

37⁄32

41⁄4

29.442.455.568.781.7

108.0

0.340.500.821.252.633.45


14WL – PLAIN FERRULE TANK SPUD (Light)

111⁄2221⁄234

25.438.150.863.576.2

101.6

221⁄421⁄223⁄434

50.857.263.569.976.2

101.6

0.8701.3701.8702.3702.8703.834

22.134.847.560.272.997.4

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.090.190.380.540.781.24


15A – THREADED TUBE FERRULE

111⁄2221⁄234

25.438.150.863.576.2

101.6

13⁄811⁄211⁄213⁄413⁄413⁄4

34.938.138.144.544.544.5

0.8701.3701.8702.3702.8703.834

22.134.847.560.272.997.4

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.090.290.380.630.871.29

B

A

B

A

C

B

A

C

B

A

C

A

B C

49

SANITARY

ACME

THREADED

FITTINGS


15WF – THREADED SHORT WELD FERRULE

111⁄2221⁄234

25.438.150.863.576.2

101.6

11⁄1623⁄3223⁄3227⁄3229⁄32

17⁄32

17.418.218.221.423.030.9

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.150.150.290.450.621.15


15W – THREADED FERRULE TANK SPUD (Heavy)

111⁄2221⁄234

25.438.150.863.576.2

101.6

11⁄215⁄813⁄413⁄4113⁄16

21⁄8

38.141.344.544.546.054.0

0.8701.3701.8702.3702.8703.834

22.134.847.560.272.997.4

11⁄413⁄425⁄16

27⁄833⁄841⁄4

31.844.558.773.085.7

108.0

0.170.350.691.001.402.50


15WL – THREADED FERRULE TANK SPUD (Light)

111⁄2221⁄234

25.438.150.863.576.2

101.6

221⁄421⁄223⁄434

50.857.263.569.976.2

101.6

0.8701.3701.8702.3702.8703.834

22.134.847.560.272.997.4

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.120.250.490.701.001.75

SIZE A C APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm

14AHR – RUBBER HOSE ADAPTER*

111⁄2221⁄234

25.438.150.863.576.2

101.6

111⁄16

111⁄16

25⁄16

211⁄32

31⁄24

42.842.858.759.588.9

101.6

11⁄32

117⁄32

21⁄32

217⁄32

31⁄32

41⁄32

26.238.951.664.377.0

102.4

0.140.260.530.801.121.54


16AT*

111⁄2221⁄234

25.438.150.863.576.2

101.6

11⁄411⁄419⁄32

***

31.831.832.5***

2225⁄8***

50.850.866.7***

* Note: 21⁄2“ - 4” (63.5 - 101.6mm) (Round O.D.) available on request.

*May be furnished in reducing sizes.

A

B

A

B C

A

B C

A B

Y FILLA

C

50

SANITARY

ACME

THREADED

FITTINGS


14AHT – TYGON HOSE ADAPTER*

111⁄2221⁄234

25.438.150.863.576.2

101.6

411⁄16

423⁄32

423⁄32

427⁄32

429⁄32

57⁄32

119.0119.8119.8123.0124.6132.5

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.310.500.680.871.121.68

B

A

A

C

B

A

A

SIZE A C APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm

15AHR – RUBBER HOSE ADAPTER*

111⁄2221⁄234

25.438.150.863.576.2

101.6

111⁄16

111⁄16

25⁄16

211⁄32

31⁄24

42.842.858.759.588.9

101.6

11⁄32

117⁄32

21⁄32

217⁄32

31⁄32

41⁄32

26.238.951.664.377.0

102.4

0.170.320.640.961.342.05




15AHT – TYGON HOSE ADAPTER*

111⁄2221⁄234

25.438.150.863.576.2

101.6

411⁄16

423⁄32

423⁄32

427⁄32

429⁄32

57⁄32

119.0119.8119.8123.0124.6132.5

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.340.560.791.031.342.19


31TP – TAPER REDUCER

SIZE A APPROX.WT. LBS.

in. mm in. mm



411⁄32

611⁄32

47⁄16

815⁄32

69⁄16

43⁄41017⁄32

85⁄8613⁄16

51⁄16

1427⁄32

1215⁄16

111⁄893⁄8717⁄32

110.3161.1112.7215.1166.7120.7267.5219.1173.0128.6377.0328.6282.6238.1191.3

0.721.051.201.351.611.651.992.232.242.542.722.913.954.354.61

51

SANITARY

ACME

THREADED

FITTINGS

31TT – TAPER REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.1

313⁄32

513⁄32

37⁄16

717⁄32

59⁄16

39⁄16

919⁄32

75⁄8

86.5137.387.3

191.3141.390.5

243.7193.7

0.440.770.690.901.101.031.711.72

3 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

55⁄833⁄41329⁄32

1115⁄16

915⁄16

81⁄16

61⁄8

142.995.3

353.2303.2252.4204.8155.6

1.461.362.442.403.173.172.94

31-14F – CONCENTRIC TAPER REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.1

411⁄32

611⁄32

47⁄16

815⁄32

69⁄16

43⁄41017⁄32

85⁄8

110.3161.1112.7215.1166.7120.7267.5219.1

1.111.771.921.802.652.853.503.74

3 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

613⁄16

51⁄16

1427⁄32

1215⁄16

111⁄893⁄8717⁄32

173.0128.6377.0328.6282.6238.1191.3

3.754.055.585.776.817.217.47

31-15F – CONCENTRIC TAPER REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.1

313⁄32

513⁄32

37⁄16

717⁄32

59⁄16

39⁄16

919⁄32

75⁄8

86.5137.387.3

191.3141.390.5

243.7193.7

0.390.710.630.850.940.871.521.53

3 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

55⁄833⁄41329⁄32

1115⁄16

915⁄16

81⁄16

61⁄8

142.995.3

353.2303.2252.4204.8155.6

1.271.172.052.012.782.782.55

32TT – ECCENTRIC TAPER REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.1

313⁄32

513⁄32

37⁄16

717⁄32

59⁄16

39⁄16

919⁄32

75⁄8

86.5137.387.3

191.3141.390.5

243.7193.7

0.440.770.691.251.101.031.711.72

3 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

55⁄833⁄41329⁄32

1115⁄16

915⁄16

81⁄16

61⁄8

142.995.3

353.2303.2252.4204.8155.6

1.461.362.442.403.173.172.94

A

A

A

A

52

SANITARY

ACME

THREADED

FITTINGS

32TP – ECCENTRIC REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.1

411⁄32

611⁄32

47⁄16

815⁄32

69⁄16

43⁄41017⁄32

85⁄8

110.3161.1112.7215.1166.7120.7267.5219.1

0.721.051.201.551.611.651.992.23

3 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

613⁄16

51⁄16

1427⁄32

1215⁄16

111⁄893⁄8717⁄32

173.0128.6377.0328.6282.6238.1191.3

2.242.542.722.913.954.354.61

32-14F – ECCENTRIC REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.1

411⁄32

611⁄32

47⁄16

815⁄32

69⁄16

43⁄41017⁄32

85⁄8

110.3161.1112.7215.1166.7120.7267.5219.1

1.111.771.922.302.652.853.503.74

3 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

613⁄16

51⁄16

1427⁄32

1215⁄16

111⁄893⁄8717⁄32

173.0128.6377.0328.6282.6238.1191.3

3.754.055.585.776.817.217.47

32-15F – ECCENTRIC REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.1

313⁄32

513⁄32

37⁄16

717⁄32

59⁄16

39⁄16

919⁄32

75⁄8

86.5137.3

87.3191.3141.390.5

243.7193.7

0.390.710.630.850.940.871.521.53

3 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 3

76.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

55⁄833⁄41329⁄32

1115⁄16

915⁄16

81⁄16

61⁄8

142.995.3

353.2303.2252.4204.8155.6

1.271.172.052.012.782.782.55


7A – TEE

111⁄2221⁄234

25.438.150.863.576.2

101.6

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

211⁄16

313⁄32

313⁄16

41⁄445⁄861⁄8

68.286.596.8

108.0117.5155.6

0.921.572.693.915.209.54

A

A

C

AB

53

SANITARY

ACME

THREADED

FITTINGS


7B – TEE

111⁄2221⁄234

25.438.150.863.576.2

101.6

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

211⁄16

313⁄32

313⁄16

41⁄445⁄861⁄8

68.286.596.8

108.0117.5155.6

41⁄2525⁄32

619⁄32

77⁄16

81⁄81025⁄32

114.3146.8167.5188.9206.4273.8

0.921.572.693.915.209.54


7X – TEE

111⁄2221⁄234

25.438.150.863.576.2

101.6

227⁄8323⁄32

427⁄32

529⁄32

81⁄16

50.873.094.4

123.0150.0204.8

453⁄477⁄16

911⁄16

1113⁄16

161⁄8

101.6146.1188.9246.0300.0409.6

0.641.061.912.733.536.49


7A – TEE

111⁄2221⁄234

25.438.150.863.576.2

101.6

227⁄8323⁄32

427⁄32

529⁄32

81⁄16

50.873.094.4

123.0150.0204.8

453⁄477⁄16

911⁄16

1113⁄16

161⁄8

101.6146.1188.9246.0300.0409.6

227⁄8323⁄32

427⁄32

529⁄32

81⁄16

50.873.094.4

123.0150.0204.8

0.901.502.633.775.049.35


7BX – TEE

111⁄2221⁄234

25.438.150.863.576.2

101.6

227⁄8323⁄32

427⁄32

529⁄32

81⁄16

50.873.094.4

123.0150.0204.8

227⁄8323⁄32

427⁄32

529⁄32

81⁄16

50.873.094.4

123.0150.0204.8

453⁄477⁄16

911⁄16

1113⁄16

161⁄8

101.6146.1188.9246.0300.0409.6

0.901.502.633.775.049.35

CB

A

A

BA

A

AB

C

CB

A

A

54

SANITARY

ACME

THREADED

FITTINGS


9 – CROSS

111⁄2221⁄234

25.438.150.863.576.2

101.6

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

0.811.403.143.884.478.20

SIZE A B C D APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm in. mm

9A – CROSS

111⁄2221⁄234

25.438.150.863.576.2

101.6

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

41⁄2525⁄32

619⁄32

77⁄16

81⁄81025⁄32

114.3146.8167.5188.9206.4273.8

211⁄16

313⁄32

313⁄16

41⁄445⁄861⁄8

68.286.596.8

108.0117.5155.6

1.091.913.925.066.14

11.25

28B – TRUE YSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

311⁄16

323⁄32

423⁄32

527⁄32

629⁄32

97⁄32

93.694.4

119.9148.4175.4234.1

0.901.433.073.294.247.61


28A – LATERAL

111⁄2221⁄234

25.438.150.863.576.2

101.6

45⁄853⁄861⁄875⁄891⁄2113⁄4

117.5136.5155.6193.7241.3298.5

45⁄16

51⁄16

51⁄267⁄881⁄410

109.5128.6139.7174.6209.6254.0

11⁄413⁄815⁄821⁄821⁄23

31.834.941.354.063.576.2

0.911.552.563.864.699.85

AB

A

B

D

B

C

A

A

A

A

A

B

AC

55

SANITARY

ACME

THREADED

FITTINGS


16A – PLAIN CAP23B – THREADED CAP

111⁄2221⁄234

25.438.150.863.576.2

101.6

15⁄16

127⁄32

23⁄8229⁄32

37⁄16

41⁄2

33.346.860.373.887.3

114.3

15⁄329⁄165⁄821⁄3223⁄3213⁄16

11.914.315.916.718.220.6

0.120.300.650.901.903.10


13H – HEX UNION NUT

111⁄2221⁄234

25.438.150.863.576.2

101.6

29⁄3231⁄32

11⁄16

13⁄16

19⁄32

11⁄2

23.024.627.030.132.538.1

113⁄16

213⁄32

3319⁄32

43⁄16

57⁄16

46.061.176.291.3

106.3138.1

0.250.440.751.251.813.63

SIZEin.

J40NH — BUNA

111⁄2221⁄234

SIZEin.

J40T — TEFLON

111⁄2221⁄234

A

B

A B

B

A

16APlain

23BTapped

Thermometer Cap(1" tapped 1/2" NPT;others tapped 3/4")

56

SANITARY

ACME

THREADED

FITTINGS

21 AND 22 ADAPTERS

A C APPROX. APPROX.WT. LBS. WT. LBS.


1 x 3⁄41 x 111⁄2 x 11⁄411⁄2 x 11⁄22 x 11⁄22 x 221⁄2 x 221⁄2 x 21⁄23 x 34 x 4

25.4 x 19.125.4 x 25.438.1 x 31.838.1 x 38.150.8 x 38.150.8 x 50.863.5 x 50.863.5 x 63.576.2 x 76.2101.6 x 101.6

23⁄16

21⁄427⁄16

27⁄16

215⁄32

221⁄32

225⁄32

39⁄32

31⁄2313⁄16

55.557.261.961.962.767.570.683.388.996.8

15⁄821⁄16

21⁄221⁄4121⁄32

211⁄32

127⁄32

23⁄32

23⁄16

25⁄8

41.352.463.557.242.159.546.853.255.566.7

.48

.50

.64

.66

.961.121.251.812.753.75

.36

.38

.971.001.161.441.562.122.884.12

NO. 21 NO. 22 NO. 21 NO. 22

14-18 – ADAPTERS(Acme Hex Union to Female N.P.T.)


111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄4213⁄16

31⁄439⁄16

445⁄16

69.971.482.690.5

101.6109.5

0.751.252.003.005.507.25

14-19 – ADAPTERS(Acme Hex Union to Male N.P.T.)


111⁄2221⁄234

25.438.150.863.576.2

101.6

31⁄831⁄435⁄16

441⁄445⁄16

79.482.684.1

101.6108.0109.5

0.751.252.003.004.757.60

MALE NPTACMETHREAD

A

FEMALE NPT

ACME THREAD

C

A

A

No.21

No.22

SIZE(TUBE O.D.)

NOTE: 1⁄2 — 3⁄4 and 21⁄2 — No hex centers

57

SANITARY

ACME

THREADED

FITTINGS

Available in any desired length (specify on order)

SIZE NO. 17C NOS. 17D & 17EMINIMUM LENGTH MINIMUM LENGTH


111⁄2221⁄234

25.438.150.863.576.2

101.6

13⁄817⁄16

17⁄16

111⁄16

113⁄16

27⁄16

34.936.536.542.846.061.9

27⁄831⁄833⁄833⁄437⁄845⁄8

73.079.485.795.398.4

117.5

Available in any desired length (specify on order)

SIZE NO. 17F & 17G NOS. 17H & 17KMINIMUM LENGTH MINIMUM LENGTH



38.1 x 25.450.8 x 25.450.8 x 38.138.1 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

13⁄817⁄16

115⁄32

115⁄32

11⁄211⁄2117⁄32

19⁄16

19⁄16

111⁄16

15⁄8121⁄32

121⁄32

125⁄32

127⁄32

34.936.537.337.338.138.138.939.739.742.841.342.142.145.246.8

33⁄32

39⁄32

33⁄839⁄16

321⁄32

321⁄32

325⁄32

37⁄837⁄8329⁄32

49⁄32

43⁄843⁄8

413⁄32

47⁄16

78.683.385.790.592.992.996.098.498.499.2108.7111.1111.1111.9112.7

TUBE ASSEMBLIES

SIZE A

in. mm in. mm

151 – HEX BLIND CAP (c/w chain)

111⁄2221⁄234

25.438.150.863.576.2

101.6

111⁄16

11⁄811⁄411⁄411⁄2

25.427.028.631.831.838.1

SIZE APPROX.WT. LBS.

in. mm

25H – ALUMINUM WRENCH

111⁄2221⁄234

25.438.150.863.576.2

101.6

0.751.251.502.002.753.50

No. 17C (3A)

No. 17D (3A)

No. 17E (3A)

No. 17F (3A)

No. 17G (3A) No. 17H (3A) No. 17K (3A)

Threaded Ferrule Threaded Ferrule

Threaded Ferrule Plain Ferrule withunion nut

Plain Ferrule with Plain Ferrule withunion nut union nut

Threaded Ferrule Concentric reducerwithout union nut

Threaded Ferrule Eccentric reducerwithout union nut

Plain Ferrule with Concentric reducerunion nut with union nut

Plain Ferrule with Concentric reducerunion nut with union nut

A

Jensen

58

SANITARY

ACME

THREADED

FITTINGS

31-18F – TAPER REDUCER-ADAPTERSanitary Plain Ferrule with Hex Nut to Female N.P.T.


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 23 x 23 x 21⁄24 x 21⁄24 x 3

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.876.2 x 50.876.2 x 63.5

101.6 x 63.5101.6 x 76.2

43⁄32

63⁄32

43⁄32

65⁄32

419⁄32

621⁄32

423⁄32

91⁄32

715⁄32

104.0154.8104.0156.4116.7169.1119.8229.4189.7

1.522.122.102.752.803.664.607.758.75

31-19F – TAPER REDUCER-ADAPTERSanitary Plain Ferrule to Male N.P.T.


11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄2

*21⁄2 x 23 x 2

*3 x 21⁄24 x 21⁄24 x 3

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.876.2 x 50.876.2 x 63.5

101.6 x 63.5101.6 x 76.2

415⁄32

615⁄32

415⁄32

619⁄32

421⁄32

623⁄32

55⁄32

915⁄32

723⁄32

113.5164.3113.5167.5118.3170.6131.0240.5196.0

0.771.051.061.34

*2.511.71

*3.603.513.96

*Hex Nuts supplied on these sizes only

SIZE S T U APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

14AHRB – RUBBER HOSE ADAPTERLONG BREWERY STYLE

111⁄2221⁄234

25.438.150.863.576.2

101.6

31⁄231⁄241⁄241⁄241⁄261⁄4

88.988.9

114.3114.3114.3158.8

13⁄16

15⁄16

113⁄16

25⁄16

213⁄16

413⁄16

20.633.346.058.771.4

122.2

11⁄32

15⁄821⁄825⁄831⁄841⁄8

26.241.354.066.779.4

104.8

0.350.450.951.251.752.75

SIZE S T U APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm in. mm

15AHRB – RUBBER HOSE ADAPTERLONG BREWERY STYLE

111⁄2221⁄234

25.438.150.863.576.2

101.6

31⁄231⁄241⁄241⁄241⁄261⁄4

88.988.9

114.3114.3114.3158.8

13⁄16

15⁄16

113⁄16

25⁄16

213⁄16

413⁄16

20.633.346.058.771.4

122.2

11⁄32

15⁄821⁄825⁄831⁄841⁄8

26.241.354.066.779.4

104.8

0.350.450.951.251.752.75

A

STD. PIPETHRD.

A

T U

S

UT

S

A Swagelok Company

Tube OD Unpolished

Butt Weld

Fittings

59

60

TUBE

OD

UNPOLISHED

BUTT

WELD

FITTINGS

J2SX – 90˚ ELLSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

11⁄221⁄4333⁄441⁄269

38.157.276.295.3

114.3152.4228.6

.13

.29

.52

.871.532.858.53

J2KSX – 45˚ ELLSIZE H APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

5⁄815⁄16

11⁄419⁄16

17⁄821⁄233⁄4

15.923.831.839.747.663.595.3

0.080.150.260.440.771.434.26

SIZE E F APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm

J7W – TEE

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

33⁄441⁄26661⁄273⁄410

95.3114.3152.4152.4165.1196.9254.0

17⁄821⁄43331⁄437⁄85

47.657.276.276.282.698.4

127.0

.28

.46

.981.321.762.898.00

SIZE E F APPROX.(TUBE O.D.) WT. LBS.in. mm in. mm in. mm

J9W – CROSS

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

33⁄441⁄26661⁄273⁄410

95.3114.3152.4152.4165.1196.9254.0

17⁄821⁄43331⁄437⁄85

47.657.276.276.282.698.4

127.0

0.330.601.381.902.113.409.50

A

H

F

F

E

F

E

E

F

61

TUBE

OD

UNPOLISHED

BUTT

WELD

FITTINGS

SIZE D E F APPROX.C X B WT. LBS.in. mm in. mm in. mm in. mm

J7WR – REDUCING TEE

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 X 36 X 4

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 76.2

21⁄43333331⁄431⁄431⁄431⁄437⁄837⁄837⁄837⁄837⁄855

57.276.276.276.276.276.282.682.682.682.698.498.498.498.498.4

127.0127.0

41⁄26666661⁄261⁄261⁄261⁄273⁄473⁄473⁄473⁄473⁄41010

114.3152.4152.4152.4152.4152.4165.1165.1165.1165.1196.9196.9196.9196.9196.9254.0254.0

21⁄823⁄821⁄223⁄423⁄431⁄431⁄8331⁄231⁄435⁄835⁄8433⁄433⁄443⁄447⁄8

54.060.363.569.969.982.679.476.288.982.692.192.1

101.695.395.3

120.7123.8

0.500.850.901.101.151.201.401.401.501.402.402.502.602.502.756.006.20

SIZE D E F G APPROX.C X B WT. LBS.in. mm in. mm in. mm in. mm in. mm

J9WR – REDUCING CROSS

11⁄2 x 12 x 12 x 11⁄221⁄2 x 121⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 23 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 36 x 4

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 25.463.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.876.2 x 63.5

101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 76.2

41⁄26666661⁄261⁄261⁄261⁄273⁄473⁄473⁄473⁄473⁄41010

114.3152.4152.4152.4152.4152.4165.1165.1165.1165.1196.9196.9196.9196.9196.9254.0254.0

21⁄43333331⁄431⁄431⁄431⁄437⁄837⁄837⁄837⁄837⁄855

57.276.276.276.276.276.282.682.682.682.698.498.498.498.498.4

127.0127.0

21⁄823⁄821⁄223⁄423⁄431⁄431⁄8331⁄231⁄435⁄835⁄8433⁄433⁄443⁄447⁄8

54.060.363.569.969.982.679.476.288.982.692.192.1

101.695.395.3

120.7123.8

41⁄443⁄4551⁄251⁄261⁄261⁄46761⁄271⁄471⁄4871⁄271⁄291⁄293⁄4

108.0120.7127.0139.7139.7165.1158.8152.4177.8165.1184.2184.2203.2190.5190.5241.3247.7

0.580.931.021.201.301.341.481.531.671.602.482.632.772.703.006.256.70

C

B

D

E

F

C G

F

F

DD

E

B

62

TUBE

OD

UNPOLISHED

BUTT

WELD

FITTINGS

J31W – CONCENTRIC REDUCER

B X C A APPROX.WT. LBS.

in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.8

24242864

50.8101.650.8

101.650.8

203.2152.4101.6

0.120.340.180.430.251.000.930.56

3 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 36 x 4

76.2 x 63.5101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 101.6

2121086464

50.8304.8254.0203.2152.4101.6152.4101.6

0.301.121.801.661.501.152.601.92

J32W – ECCENTRIC REDUCER


in. mm in. mm


in. mm in. mm

11⁄2 x 12 x 12 x 11⁄221⁄2 x 11⁄221⁄2 x 23 x 13 x 11⁄23 x 2

38.1 x 25.450.8 x 25.450.8 x 38.163.5 x 38.163.5 x 50.876.2 x 25.476.2 x 38.176.2 x 50.8

24242864

50.8101.650.8

101.650.8

203.2152.4101.6

0.120.340.180.430.251.000.930.56

3 x 21⁄24 x 14 x 11⁄24 x 24 x 21⁄24 x 36 x 36 x 4

76.2 x 63.5101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2152.4 x 76.2152.4 x 101.6

2121086464

50.8304.8254.0203.2152.4101.6152.4101.6

0.301.121.801.661.501.152.601.92

J19W – ADAPTERSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

13⁄413⁄4113⁄16

25⁄16

21⁄229⁄16

44.544.546.058.763.565.1

0.500.600.751.202.002.60

May be furnished in reducing sizes.

26EF – ADAPTERSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

13⁄815⁄16

13⁄4113⁄16

21⁄423⁄8

34.933.344.546.057.260.3

0.750.801.002.203.505.40

May be furnished in reducing sizes.

A

B C

A

B C

63

TUBE

OD

UNPOLISHED

BUTT

WELD

FITTINGS

J28BW – TRUE YSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm1⁄23⁄4111⁄2221⁄2346

12.719.125.438.150.863.576.2

101.6152.4

223345688

50.850.876.276.2

101.6127.0152.4203.2203.2

0.220.340.540.831.541.882.474.01

11.44

A

A


J28WA – LATERAL YAND REDUCING LATERAL Y


12.719.125.438.150.863.576.2


101.6 x 12.7101.6 x 19.1101.6 x 25.4101.6 x 38.1101.6 x 50.8101.6 x 63.5101.6 x 76.2

66673⁄883⁄410103⁄41213⁄16

161⁄26673⁄873⁄873⁄883⁄483⁄483⁄483⁄41010101010103⁄4103⁄4103⁄4103⁄4103⁄4103⁄41213⁄16

1213⁄16

1213⁄16

1213⁄16

1213⁄16

1213⁄16

1213⁄16

152.4152.4152.4187.3222.3254.0273.1325.4419.1152.4152.4187.3187.3187.3222.3222.3222.3222.3254.0254.0254.0254.0254.0273.1273.1273.1273.1273.1273.1325.4325.4325.4325.4325.4325.4325.4

55563⁄16

71⁄881⁄287⁄8103⁄4121⁄25563⁄16

63⁄16

63⁄16

71⁄871⁄871⁄871⁄881⁄281⁄281⁄281⁄281⁄287⁄887⁄887⁄887⁄887⁄887⁄8103⁄4103⁄4103⁄4103⁄4103⁄4103⁄4103⁄4

127.0127.0127.0157.1181.0215.9225.4273.1317.5127.0127.0157.1157.1157.1181.0181.0181.0181.0215.9215.9215.9215.9215.9225.4225.4225.4225.4225.4225.4273.1273.1273.1273.1273.1273.1273.1

11113⁄16

15⁄811⁄217⁄821⁄16

41113⁄16

13⁄16

13⁄16

15⁄815⁄815⁄815⁄811⁄211⁄211⁄211⁄211⁄217⁄817⁄817⁄817⁄817⁄817⁄821⁄16

21⁄16

21⁄16

21⁄16

21⁄16

21⁄16

21⁄16

25.425.425.430.141.338.147.652.4

101.625.425.430.130.130.141.341.341.341.338.138.138.138.138.147.647.647.647.647.647.652.452.452.452.452.452.452.4

.065

.065

.065

.065

.065

.065

.065

.083

.109

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.083

.083

.083

.083

.083

.083

.083

B

CA

64

TUBE

OD

UNPOLISHED

BUTT

WELD

FITTINGS

SIZE D I.D. A B C T(TUBE O.D.)in. mm in. mm in. mm in. mm in. mm in. mm in. mm

J38W – WELD NECK LIGHT-TYPE FLANGE

111⁄2221⁄2346

25.438.150.863.576.2

101.6152.4

41⁄456771⁄2911

108.0127.0152.4177.8190.5228.6279.4

7⁄813⁄817⁄823⁄827⁄8327⁄32

525⁄32

22.234.947.660.373.097.6

146.8

4444488

101.6101.6101.6101.6101.6203.2203.2

31⁄837⁄843⁄451⁄2671⁄291⁄2

79.498.4

120.7139.7152.4190.5241.3

3⁄83⁄87⁄161⁄21⁄21⁄21⁄2

9.59.5

11.112.712.712.712.7

5⁄85⁄83⁄43⁄43⁄43⁄47⁄8

15.915.919.119.119.119.122.2

J16W – BUTT WELD CAPSIZE A APPROX.(TUBE O.D.) WT. LBS.

in. mm in. mm

111⁄2221⁄234

25.438.150.863.576.2

101.6

7⁄169⁄163⁄411⁄16

11⁄811⁄4

11.114.319.127.028.631.8

0.050.090.250.290.330.56

A

TUBE O.D. BUTT WELD FITTINGS304 or 316L IN STOCK

Jensen stocks a full range of O.D. Tube, unpolished fittings, in 304 or 316L

A Swagelok Company

Miscellaneous

Flow

Components

65

Manual Butterfly Valves

FeaturesTwo Handle Options—MP: Multi-Position

2P: Two-Position

� Available in 304 SS and 316L SS.

� Sizes available include 1 to 4 in. OD.

� Seal material is silicone.

� Maximum temperature is 250°F (121°C) based on sealmaterial manufacturer’s rating.

FeaturesThe following information is applicable to all butterfly valves, either manual or air-actuated:

Ordering Number

EndConnection

Size

Kwik-Clamp

A A B C D E


1 in. 2 33/64(63.9)

1 37/64(40.1)

3 27/64(86.9)

5 29/32(150)

3 35/64(90.1)

3 35/64(90.1)

1 1/2 in.

2 in.

2 1/2 in.

3 in.

4 in.

3(76.2)

4 3/32(104)

1 31/32(50.0)

2 33/64(63.9)

3 53/64(97.2)

4 21/64(110)

5(127)

5 19/32(142)

6 3/8(162)

3 47/64(94.8)

3 31/32(101)

4 21/64(110)

4 39/64(117)

5 3/64(128)

3 3/4(95.2)

4 1/16(103)

4 11/32(110)

4 41/64(118)

5 1/32(128)

AJC10B 7 15 H 4 15 MP

Hand Operated

Handle TypeMP = Multi-Position2P = Two-Position

Material Grade4 = 304 SS6 = 316L SS

Item CodeAJC10B = Kwik-Clamp ConnectionAJ10B = Tube Butt Weld Connection

End Connection Size10 = 1 in.15 = 1 1/2 in.20 = 2 in.25 = 2 1/2 in.30 = 3 in.40 = 4 in.


2 53/64(71.8)

Polish

Dimensions are for referenceonly, and are subject to change.

WallThickness

Tube Butt Weld

0.065(1.6)

0.083(2.1)

� Maximum pressure is 145 psig (10 bar) on 1 to 3 in.and 115 psig (7.9 bar) on 4 in.

� Kwik-Clamp and tube butt weld connections.

� Acme threaded ends available upon request.

Dimensions

C

D

A

E

B

C

Two-PositionHandle

Multiple-PositionHandle

66

MISCELLANEOUS

FLOW

COMPONENTS

67

MISCELLANEOUS

FLOW

COMPONENTS

Air-Actuated Butterfly Valves

� Normally closed and double-acting actuators

� External switch options and control tops are available.


Ordering Number AJC10B-7-4-20-20

Polish

Actuator Type20 = Normally closed30 = Double-acting


EndConnection

Size

Kwik-Clamp

A A B C


1 in. 2 33/64(63.9)

1 37/64(40.1)

3 27/64(86.9)

9 11/64(233)

1 1/2 in.

2 in.

2 1/2 in.

3 in.

4 in.

3(76.2)

4 3/32(104)

1 31/32(50.0)

2 33/64(63.9)

3 53/64(97.2)

4 21/64(110)

5(127)

5 19/32(142)

6 3/8(162)

2 53/64(71.8)

9 3/8(238)

9 41/64(245)

9 23/32(247)

10(254)

10 43/64(271)

Dimensions

Dimensions, in inches (millimeters), are for reference only, andare subject to change.

A B

C3 25/32(96.0)

Tube Butt Weld

WallThickness

0.065(1.6)

0.083(2.1)

Item CodeAJC10B = Kwik-Clamp ConnectionAJ10B = Tube Butt Weld Connection

EndConnection

SizeA

ClampA

Threaded


1/2 in. 4 5/16(110)

—3/4 in.

1 in.

1 1/2 in.

2 in.

2 1/2 in. 6 17/64(159)

7 61/64(202)

3 in.

4 in.

5 1/8(130)

5 1/16(129)

6 1/8(156)

6 15/16(176)

6 1/2(165)

6 9/16(167)

6 1/2(165)

7 15/16(202)

9 3/8(238)

Vertical Disk Check Valves

FeaturesPurpose: Prevention of product backflow for vertical applications

� Produced from 304 SS or 316L SS

� Available in the following sizes:Kwik-Clamp (45HC)—1/2 to 4 in.Acme Threaded (45H)—1 to 4 in.

� Standard body seal material is Buna. Other seal materialsavailable.

� Tube butt weld ends available upon request.

� Crack pressure: 3 psig (0.2 bar) maximum

� Maximum operating pressure: 150 psig (10 bar)

� Maximum operating temperature (based on seal materialmanufacturer’s rating):� 250°F (121°C) for Buna body seal� 350°F (176°C) for optional fluorocarbon FKM body seal.

Disk check valves must be mounted vertically.

Dimensions

A

Ordering Number 45HC 6 20


Item Code45HC = Kwik-Clamp45H = Acme Thread

End Connection Size50 = 1/2 in.75 = 3/4 in.10 = 1 in.15 = 1 1/2 in.20 = 2 in.25 = 2 1/2 in.30 = 3 in.40 = 4 in.

68

MISCELLANEOUS

FLOW

COMPONENTS

69

MISCELLANEOUS

FLOW

COMPONENTS

Ball Check Valves

Features

Purpose: Prevention of product backflow

� 316L SS

� Internal ball available in Buna, Nylon, EPDM, andfluorocarbon FKM. Buna is standard.

� 1 1/2 to 3 in. sizes

Ain. (mm)

1 1/2 in. 12(305)

2 in.

2 1/2 in.

3 in.

10 1/4(260)

11(279)

14(356)

Dimensions

A

EndConnection

Size

Ordering Number JC45BY 6 20

Material Grade

Item Code End Connection Size15 = 1 1/2 in.20 = 2 in.25 = 2 1/2 in.30 = 3 in.

70

MISCELLANEOUS

FLOW

COMPONENTS

Compression and Relief Valves

Features� 316L SS

� 1 to 3 in. sizes, 3/4 in. also available for clamp end.

EndConnection

SizeA

ClampA

Threaded


3/4 in.

1 in.

1 1/2 in.

2 in.

2 1/2 in. 3 3/16(81.0)

3 in.

3 1/2(88.9)

3 3/4(95.2)

1 13/16(46.0)

2 3/8(60.3)

2 25/32(70.6)

3 1/2(88.9)

2 3/8(60.3)

2 3/4(69.8)

—

Dimensions

A

A

A

A

Ordering Number D60TMP 6 20

Material Grade

Item CodeD60TMP = Clamp end compression valveD60TM = ACME thread compression valveD60RTHMP = Clamp end relief valveD60RTH = ACME thread relief valve

End Connection Size75 = 3/4 in.10 = 1 in.15 = 1 1/2 in.20 = 2 in.25 = 2 1/2 in.30 = 3 in.

71

MISCELLANEOUS

FLOW

COMPONENTS

Sanitary Ball Valves

Features� 1/2 to 4 in. sizes

� 316 stainless steel; investment cast

� On-off (2-way) valves

� Cavity filled virgin PTFE seat

� Kwik-Clamp, butt weld, and TS series sanitary clampend connections

� True ID bore

� Blow-out proof stem

� 15 µin. (0.38 µm) Ra internal finish

� ISO 5211 and DIN 3337 mounting pads

� Locking handle

Materials of Construction

1 Body

CF8M (316 SS)/ASTM A351

Component Material / Specification

2 Flange

3 Ball

4 Seat

5 Flange seal

6 Thrust washer

7 Stem packing

8 Packing bolt

9 Stem washer

10 Stem nut

11 Stem

12 Bolt washer

13 Nut

14 Bolt

15 Handle

16 Handle sleeve

PTFE

304 SS/AISI

316 SS /ASTM A276

304 SS/AISI

301 SS/AISI

PVC

14

109

158

11

7

6

5

4

3

2

1

12

16

13

17

Pressure-Temperature Ratings1000 psig (68 bar) maximum at 72°F (22°C).

Pressure ratings will depend on temperature. Temperature islimited by materials of construction.

17 Locking latch 316 SS

Wetted components are listed in italics.

72

MISCELLANEOUS

FLOW

COMPONENTS

Ordering Information and DimensionsSelect a sanitary ball valve ordering number.

W

H

L

Dimensions are for reference only and are subject to change.➀ TS Series sanitary clamp end connections are available. Contact your local independent Swagelok sales and service representative.

Valve Sizein.

WallThickness

1/2

3/4

1

0.065

1 1/2

2

2 1/2

3

4

0.065

0.065

0.065

0.065

0.065

0.065

0.083

EndConnection➀

OrderingNumber

Tube butt weld

Kwik-Clamp

JBV650

—

—

—

—

—

—

—

—

Kwik-Clamp

Kwik-Clamp

Kwik-Clamp

Kwik-Clamp

Kwik-Clamp

Kwik-Clamp

Kwik-Clamp

Tube butt weld

Tube butt weld

Tube butt weld

Tube butt weld

Tube butt weld

Tube butt weld

Tube butt weld

JCBV650

JBV675

JCBV675

JBV610

JCBV610

JBV615

JCBV615

JBV62

JCBV62

JBV625

JCBV625

JBV630

JCBV630

JBV640

JCBV640

HWeightlb (kg)ID L W

ISO5211

0.37(9.39)


3.50(88.9)

2.05(52.0)

0.63(16.0)

3.98(101)

2.24(56.8)

F03

1.55(0.70)

1.95(0.88)5.16

(131)

3.94(100)

0.87(22.0)

4.49(114)

2.36(59.9)

1.38(35.0)

1.87(47.4)

2.37(60.1)

2.87(72.8)

3.84(97.5)

5.51(139)

6.14(155)

7.76(197)

9.02(229)

9.49(241)

7.09(180)

3.54(88.9)

4.02(102)

5.51(139)

6.10(164)

7.36(186)

10.24(260)

11.42(290)

F04

F05

2.80(1.27)

7.00(3.17)

9.50(4.30)

19.5(8.84)

29.5(13.3)

43.0(19.5)

F10

F07

73

MISCELLANEOUS

FLOW

COMPONENTS

S.S. TUBING HANGER

3-POINT EPDM GROMMET SUPPORTJ24FCF

PVC INSERT SUPPORTJ24PVC

• Two-piece design provides maximum strength at minimum cost.

• Easily installed with standard wrenches.

• SS bolts fasten to SS lock nut with nylon insert eliminating lock washers.

• Support rods are welded to hanger at time of installation for maximum strength.

• Standard sizes: 1/2"(12.7mm) - 6"(152.4mm) tube O.D.

• For J24PVC sizes 1"(25.4mm), 3/4"(19.1mm) and 1/2"(12.7mm) the brackets do not have holes for grommets.

74

MISCELLANEOUS

FLOW

COMPONENTS

STRAINER & FILTERS(316L s/s)

Jensen's Inline Strainer is an all stainless design that is efficient, light weight, corrosionresistant, versatile, and easy to clean. It is compatible with most industry leaders. Availablein 316L S/S.

75

MISCELLANEOUS

FLOW

COMPONENTS

CONNECTIONSBEVEL SEAT CLAMP

CONNECTIONS CONNECTIONS EFFECTIVETUBE OD STRAINER LENGTH STRAINER LENGTH STRAINER AREA

in. mm PART NO. in. mm PART NO. in. mm(SQ. FT.)

111⁄2221⁄231⁄211⁄2221⁄23

25.438.150.863.588.938.150.863.576.2

S1-1S1-11⁄2S1-2S1-21⁄2S1-3S2-11⁄2S2-2S2-21⁄2S2-3

16.1316.1916.1916.3816.5035.8135.8136.0036.13

409.7411.2411.2416.1419.1909.6909.6914.4917.7

SM1-1SM1-11⁄2SM1-2SM1-21⁄2SM1-3SM2-11⁄2SM2-2SM2-21⁄2SM2-3

15.7515.7515.7515.7515.7535.3835.3835.3835.38

400.1400.1400.1400.1400.1898.7898.7898.7898.7

0.650.650.650.750.751.951.952.252.25

INLINE STRAINERS

CONNECTIONSBEVEL SEAT CLAMP

CONNECTIONS CONNECTIONS EFFECTIVETUBE OD STRAINER LENGTH STRAINER LENGTH STRAINER AREA

in. mm PART NO. in. mm PART NO. in. mm(SQ. FT.)

111⁄2221⁄2311⁄2221⁄23

25.438.150.863.576.238.150.863.576.2

F1-1F1-11⁄2F1-2F1-21⁄2F1-3F2-11⁄2F2-2F2-21⁄2F2-3

16.1316.1916.1916.3816.5035.8135.8136.0036.13

409.7411.2411.2416.1419.1909.6909.6914.4917.7

FM1-1FM1-11⁄2FM1-2FM1-21⁄2FM1-3FM2-11⁄2FM2-2FM2-21⁄2FM2-3

15.7515.7515.7515.7515.7535.3835.3835.3835.38

400.1400.1400.1400.1400.1898.7898.7898.7898.7

0.650.650.650.750.751.951.952.252.25

INLINE FILTERS

MEDIA MICRON DESCRIPTIONTYPE RATING30B30C30D30E30G30N

50030076540

420250

COTTON FLANNELCOTTON CHEESE CLOTHWOVEN NYLON OR POLYESTERNON-WOVEN RAYONWOVEN NYLON OR RAYON, 40 MESHSMOOTH WEAVE DACRON

FILTER MEDIA SCHEDULE

PART USE INSIDE OF . . .

HOLES PER % OFNUMBER SQUARE INCH OPEN AREA

S1CORES1WCORES2CORES2WCORES1CORE18S1WCORE18S2CORE18S2WCORE18

5858585840404040

9999

40404040

1", 1.5" & 2" SHORT UNITS2.5" & 3" SHORT UNITS1", 1.5" & 2" LONG UNITS2.5" & 3" LONG UNITS1", 1.5" & 2" SHORT UNITS2.5" & 3" SHORT UNITS1", 1.5" & 2" LONG UNITS2.5" & 3" LONG UNITS

REPLACEMENT PERFORATED BACK-UP TUBES

76

MISCELLANEOUS

FLOW

COMPONENTS

SIGHTGLASS ASSEMBLY

Model JCD 54304 s/s or 316L s/s

Jensen's Sightglass Assembly, along with Jensen's Kwik-Clampconnections, allow fast takedown for cleaning. It can be easily installed innew or existing clamp lines because it has the same center to face dimen-sions as our standard tee or cross. Pyrex glass is utilized to provide extrastrength. (Buna N Gasket.)

77

MISCELLANEOUS

FLOW

COMPONENTS

JensenSIGHTGLASS ASSEMBLY

S

S

H

JJ

W

MODEL JCD54Sight Glass Assembly Dimensions

SIZE H W J S

in. mm in. mm in. mm in. mm in. mm

11⁄2221⁄234

38.150.863.576.2

101.6

51⁄27771⁄29

139.7177.8177.8190.5228.6

45⁄851⁄861⁄261⁄875⁄8

117.5130.2165.1155.6193.7

13⁄815⁄825⁄16

21⁄827⁄8

34.941.358.754.073.0

23⁄431⁄231⁄233⁄441⁄2

69.988.988.995.3

114.3

Some benefits of our Sightglass are:1) Fast Inspection2) Fast and Easy to Clean3) Compatible with most Clamp Connections.4) Available in 304 or 316L s/s

78

MISCELLANEOUS

FLOW

COMPONENTS

JensenSIGHTGLASS

JENSAFE SIGHT GLASS#162S

INLINE SIGHT GLASS#162

A

ACRYLIC SHIELD

PYREX GLASS

C

PYREX GLASS

B

D

162S JENSAFE SIGHTGLASS‘A’ OVERALL LENGTH DIMENSIONSSIZE

BUTT WELD ACME THREAD KWIK CLAMP C

in. mm in. mm in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

31⁄231⁄231⁄2555

88.988.988.9

127.0127.0127.0

61⁄461⁄261⁄281⁄281⁄281⁄2

158.8165.1165.1215.9215.9215.9

53⁄453⁄453⁄471⁄471⁄471⁄4

146.1146.1146.1184.2184.2184.2

5551⁄261⁄261⁄28

127.0127.0139.7165.1165.1203.2

162 JENSAFE SIGHTGLASS‘A’ OVERALL LENGTH DIMENSIONSSIZE

BUTT WELD ACME THREAD KWIK CLAMP D

in. mm in. mm in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

33⁄833⁄833⁄837⁄8551⁄8

85.785.785.798.4

127.0130.2

61⁄863⁄863⁄873⁄881⁄285⁄8

155.6161.9161.9187.3215.9219.1

55⁄855⁄855⁄861⁄871⁄473⁄8

142.9142.9142.9155.6184.2187.3

31⁄4441⁄443⁄451⁄261⁄2

82.6101.6108.0120.7139.7165.1

(Note: Pyrex Glass utilized with WhiteBuna Gasket & any type of endconnection you desire is available)

79

MISCELLANEOUS

FLOW

COMPONENTS

JensenSIGHTGLASS

162 162S

(Note: Pyrex Glass utilized with White BunaGasket & any type of end connection you desire is available)

Jensen Offers A Special Safety SightglassJENSAFE

(162 S)

The Jensafe features a heavy duty, clearacrylic protective shell surrounding thePyrex glass. The purpose of this protec-tive shell is to protect the glass fromfalling objects, which may cause break-age. Jensafe also offers much higherPSI and temperature ratings than mostsightglasses available. This sightglasscan be provided with thread, flange,clamp or weld ends. Special ends canalso be manufactured to customer draw-ings or specifications.

80

MISCELLANEOUS

FLOW

COMPONENTS

WELD IN SIGHTGLASS(JC54W)

This sightglass connects to the standard clamp fittings and allows for quick disassembly.This unit is available in 304 or 316L, sizes 11⁄2"(38.1mm), 2"(50.8mm), 3"(76.2mm), or 4"(101.6mm).

LATERAL & TRUE YKwik Clamp/Butt Weld/Acme Threaded

(304 s/s or 316L s/s)

Jensen offers an excellentquality Lateral Y, ReducingLateral Y or True Y, in any type end configuration you require.

81

MISCELLANEOUS

FLOW

COMPONENTS

ADAPTER SIZE R B


FLOW PLATE

11⁄2221⁄23

38.150.863.576.2

41⁄4671⁄29

108.0152.4190.5228.6

15202426

381.0508.0609.6660.4

Seven Kwik Clamp Ferrules

ADAPTER SIZE A B


FLOW PLATE

11⁄2221⁄23

38.150.863.576.2

41⁄4671⁄29

108.0152.4190.5228.6

10151515

254.0381.0381.0381.0

Four Kwik Clamp Ferrules

TTube OD, in.

FlangeSize, in.

OrderingNumber A B D

EMinimumOpening F

GHex Flat I

1/4 1/2 SS-400-SC-8 1.57 0.37 0.60 0.19 1 9/16 0.98

1/4 3/4 SS-400-SC-12 1.57 0.62 0.60 0.19 1 9/16 0.98

1/4 1 SS-400-SC-16 1.57 0.87 0.60 0.19 1 3/8 9/16 1.98

1/4 1 1/2 SS-400-SC-24 1.57 1.37 0.60 0.19 1 3/8 9/16 1.98

3/8 1/2 SS-600-SC-8 1.63 0.37 0.66 0.28 1 11/16 0.98

3/8 3/4 SS-600-SC-12 1.63 0.62 0.66 0.28 1 11/16 0.98

3/8 1 SS-600-SC-16 1.63 0.87 0.66 0.28 1 3/8 11/16 1.98

3/8 1 1/2 SS-600-SC-24 1.63 1.37 0.66 0.28 1 3/8 11/16 1.98

1/2 1/2 SS-810-SC-8 1.74 0.37 0.86 0.37 1 7/8 0.98

1/2 3/4 SS-810-SC-12 1.74 0.62 0.86 0.41 1 7/8 0.98

1/2 1 SS-810-SC-16 1.74 0.87 0.86 0.41 1 3/8 7/8 1.98

1/2 1 1/2 SS-810-SC-24 1.74 1.37 0.86 0.41 1 3/8 7/8 1.98

1 1 SS-1610-SC-16 1.91 0.87 1.04 0.87 1 3/8 1 1/2 1.98

1 2 SS-1610-SC-32 2.49 1.87 1.04 0.88 2 3/4 1 1/2 2.52

Sanitary Flange To Swagelok Tube Fitting

IB

F

E

G

T

D

A

Dimensions are for reference only and are subject to change.

82

MISCELLANEOUS

FLOW

COMPONENTS

INTERLOCK FITTINGS

Jensen's Interlock 304 and 316L Fittings.

These are available in 1"(25.4mm) through 4"(101.6mm) and are compatible with the othermanufacturers of these types of fittings.

83

MISCELLANEOUS

FLOW

COMPONENTS

INTERLOCK FITTINGS

SIZE A

in. mm in. mm

14WI

111⁄2221⁄234

25.438.150.863.576.2

101.6

19⁄323⁄425⁄3227⁄3229⁄32

11⁄32

15.119.119.821.423.026.2

A

SIZE A

in. mm in. mm

15WI

111⁄2221⁄234

25.438.150.863.576.2

101.6

25⁄3215⁄16

11⁄32

15⁄32

17⁄32

111⁄32

19.823.826.229.430.934.1

A

SIZE

in. mm

13IS

111⁄2221⁄234

25.438.150.863.576.2

101.6

SIZE

in. mm

16AI-14I

111⁄2221⁄234

25.438.150.863.576.2

101.6

SIZE

in. mm

16AI-15I

111⁄2221⁄234

25.438.150.863.576.2

101.6

84

MISCELLANEOUS

FLOW

COMPONENTS

JOHN PERRY FITTINGS14WJP

SIZE A B(TUBE O.D.)in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

11⁄1623⁄3213⁄1627⁄3227⁄32

17⁄32

17.418.220.621.421.430.9

111⁄2221⁄234

25.438.150.863.576.2

101.6

15WFF


25.438.150.863.576.2

101.6

5⁄85⁄83⁄427⁄327⁄811⁄16

15.915.919.121.422.227.0

111⁄2221⁄234

25.438.150.863.576.2

101.6

14AJP


25.438.150.863.576.2

101.6

13⁄811⁄211⁄213⁄413⁄413⁄4

34.938.138.144.544.544.5

111⁄2221⁄234

25.438.150.863.576.2

101.6

15AFF


25.438.150.863.576.2

101.6

13⁄811⁄211⁄213⁄413⁄413⁄4

34.938.138.144.544.544.5

111⁄2221⁄234

25.438.150.863.576.2

101.6

16AJP


25.438.150.863.576.2

101.6

11⁄8121⁄32

23⁄16

221⁄32

33⁄16

43⁄16

28.642.155.567.580.9

106.3

15⁄321⁄217⁄325⁄85⁄85⁄8

11.912.713.515.915.915.9

13H


25.438.150.863.576.2

101.6

113⁄16

213⁄32

3319⁄32

43⁄16

57⁄16

46.061.176.291.3

106.3138.1

29⁄3231⁄32

11⁄16

13⁄16

11⁄411⁄2

23.024.627.030.131.838.1

85

MISCELLANEOUS

FLOW

COMPONENTS

APV FITTINGSK-CLAMP

SIZE A

in. mm in. mm

JA2

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄16

215⁄16

33⁄4419⁄32

513⁄32

7

55.574.695.3

116.7137.3177.8

SIZE MG

in. mm in. mm

JA2K

111⁄2221⁄234

25.438.150.863.576.2

101.6

15⁄16

113⁄32

2213⁄32

225⁄32

31⁄2

33.335.750.861.170.688.9

JA7

SIZE C E(TUBE O.D.)in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

JA9


25.438.150.863.576.2

101.6

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

86

MISCELLANEOUS

FLOW

COMPONENTS

K-CLAMP

JA14X

SIZE A B C(TUBE O.D.)in. mm in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

11⁄1611⁄163⁄427⁄3229⁄32

1

17.417.419.121.423.025.4

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

JA14A


25.438.150.863.576.2

101.6

13⁄817⁄825⁄16

21⁄2211⁄16

23⁄4

34.947.658.763.568.269.9

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

JA14


25.438.150.863.576.2

101.6

221⁄421⁄223⁄434

50.857.263.569.976.2

101.6

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

SIZE A

in. mm in. mm

JA16

111⁄2221⁄234

25.438.150.863.576.2

101.6

1⁄41⁄41⁄41⁄41⁄41⁄4

6.46.46.46.46.46.4

A

87

MISCELLANEOUS

FLOW

COMPONENTS

SIZE A

in. mm in. mm

2CPV

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄16

215⁄16

33⁄4419⁄32

513⁄32

7

55.574.695.3

116.7137.3177.8

SIZE A

in. mm in. mm

2EPV

111⁄2221⁄234

25.438.150.863.576.2

101.6

23⁄32

227⁄32

321⁄32

415⁄32

59⁄32

613⁄16

53.272.292.9

113.5134.1173.0

2FPV

SIZE AG Y(TUBE O.D.)in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

227⁄8323⁄32

427⁄32

529⁄32

81⁄16

50.873.094.4

123.0150.0204.8

23⁄16

215⁄16

33⁄4419⁄32

513⁄32

7

55.574.695.3

116.7137.3177.8

2PPV

SIZE MG NG(TUBE O.D.)in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

15⁄16

123⁄32

21⁄825⁄831⁄841⁄4

33.343.654.066.779.4

108.0

23⁄16

215⁄16

33⁄4213⁄32

225⁄32

31⁄2

55.574.695.361.170.688.9

A

A

A

A

Y

AG

NG

45˚

MG

PV THREADED

88

MISCELLANEOUS

FLOW

COMPONENTS

7PV


25.438.150.863.576.2

101.6

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

7APV

SIZE C E E1(TUBE O.D.)in. mm in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

239⁄64

319⁄64

323⁄32

41⁄841⁄2561⁄64

66.383.794.4

104.8114.3151.2

9PV


25.438.150.863.576.2

101.6

35⁄843⁄459⁄16

63⁄8795⁄16

92.1120.7141.3161.9177.8236.5

113⁄16

23⁄8225⁄32

33⁄16

31⁄2421⁄32

46.060.370.680.988.9

118.3

14APV

SIZE OL N T(TUBE O.D.)in. mm in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

119⁄64

149⁄64

27⁄32

23⁄829⁄16

237⁄64

32.944.856.360.365.165.5

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

E EC

E

E E

C

E1

E E

C

E

E

OL

TN

PV THREADED

89

MISCELLANEOUS

FLOW

COMPONENTS

14WLPV

SIZE A N T(TUBE O.D.)in. mm in. mm in. mm in. mm111⁄2221⁄234

25.438.150.863.576.2

101.6

159⁄64

29⁄64

213⁄32

25⁄827⁄8353⁄64

48.854.461.166.773.097.2

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

14WXPV


25.438.150.863.576.2

101.6

39⁄6437⁄6421⁄3223⁄3225⁄3253⁄64

15.514.716.718.219.821.0

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

15APV


25.438.150.863.576.2

101.6

15⁄817⁄823⁄825⁄827⁄827⁄8

41.347.660.366.773.073.0

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

15WLPV


25.438.150.863.576.2

101.6

221⁄421⁄223⁄434

50.857.263.569.976.2

101.6

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

PV THREADED

A

T

N

A

B C

A

T

N

A

TN

90

MISCELLANEOUS

FLOW

COMPONENTS

15WXPV


25.438.150.863.576.2

101.6

11⁄1611⁄163⁄427⁄3229⁄32

1

17.417.419.121.423.025.4

0.871.371.872.372.873.83

22.134.847.560.272.997.3

111⁄2221⁄234

25.438.150.863.576.2

101.6

PV THREADED

SIZE OL

in. mm in. mm

16APV

111⁄2221⁄234

25.438.150.863.576.2

101.6

19⁄6427⁄6415⁄3215⁄321⁄217⁄32

7.510.711.911.912.713.5

13H


25.438.150.863.576.2

101.6

113⁄16

213⁄32

3319⁄32

43⁄16

57⁄16

46.061.176.291.3

106.3138.1

29⁄3231⁄32

11⁄16

13⁄16

11⁄411⁄2

23.024.627.030.131.838.1

B C

A

91

MISCELLANEOUS

FLOW

COMPONENTS

We Specialize In “Specials”Jensen offers a wide range of “special” products to fit your “special” needs.The following are a few examples of what we can do for you. We will provide CADdrawings within hours and finished product within days.

2" KC MANIFOLD

92

MISCELLANEOUS

FLOW

COMPONENTS

2" x 4" x 3/4" KC ASSEMBLY

1/2" KC x KC 45 ̊RETURN ASSEMBLY

93

MISCELLANEOUS

FLOW

COMPONENTS

8" BODY MANIFOLD

SIDE INLET DUAL STRAINER

94

MISCELLANEOUS

FLOW

COMPONENTS

4" KC CAPPED ADAPTER

APV REDUCING 180 RETURN BEND

95

MISCELLANEOUS

FLOW

COMPONENTS

What is the symbol?

It is the symbol which manufacturers of dairy equipment may affix to their product when itconforms to 3-A Sanitary Standards.

The sanitary standards themselves are collaboratively formulated by groups representingprocessors, suppliers and regulatory officials, with the advice of sanitation specialists from thefederal government. The standards are voluntarily met by fabricators and manufacturers.Generally, equipment which conforms to a 3-A Sanitary Standards is accepted by federal, state,and local regulatory authorities.

Who may use the symbol?

Only those manufacturers whose equipment conforms to existing 3-A Sanitary Standards, andwho are authorized to do so by the 3-A Sanitary Standards Symbol Administrative Council.Because the standards themselves may be amended, manufacturers must apply annually forthe privilege of using the 3-A Symbol, and must indicate annually that in all respects theirproducts conform to published 3-A Sanitary Standards.

Jensen Fittings Corporation is proud to be anactive participant in the program.

ISO 9001, Quality systems - Model for qualityassurance in design/development, production,installation and servicing.

For use when conformance to specifiedrequirements is to be assured by the supplier during several stages which may includedesign/development, production, installation and servicing.

ISO 9002, Quality systems - Model for qualityassurance in production and installation.

For use when conformance to specifiedrequirements is to be assured by the supplier during production and installation.

ISO 9003, Quality systems - Model for qualityassurance in final inspection and test.

For use when conformance to specifiedrequirements is to be assured by the supplier solely at final inspection and test.

It is emphasized that the quality systemrequirements specified in this International Standard,ISO 9001 and ISO 9003 are complimentary (notalternative) to the technical (product/service)specified requirements.

It is intended that these International Standards will normally be adopted in their present form, but onoccasions they may need to be tailored for specificcontractual situations. ISO 9000 provided guidanceon such tailoring as well as selection of theappropriate quality assurance model, for example,ISO 9001, ISO 9002 or ISO 9003.

Jensen ALSO PROVIDES...• Tubing, 304 or 316L S/S• Customer Engineering & Manufacturing

Contact us with any of your engineeringneeds.

Since 1959 we have provided competitiveprices, with excellent quality & service.

ISO

REG

ISTERED • QUALITY

•S

YS

TE

M

ISOREGISTERED

is an ISO Registered

Company.

International

Standard for Total

Quality Systems.

Safe Product SelectionWhen selecting a product, the total system designmust be considered to ensure safe, trouble-freeperformance. Function, material compatibility,adequate ratings, proper installation, operation, andmaintenance are the responsibilities of the systemdesigner and user.

a swagelok company - infracominfracom.kylos.pl/profil_tech_katalog/a/11/11_01_(02150).pdf · a...

Documents