a skeg guard easily slides on a new skeg
DESCRIPTION
Getting your skeg back to it’s original shape and size is more important than you think. When your skeg is broken and shorter than the factory size the boat can have trouble steering at low speeds.https://www.skegprotector.com/TRANSCRIPT
A skeg guard easily slides on a new skeg or broken skeg that taps into place with no welding needed.
This SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an ...
Take your horizontal measurement and match it to one of the three Blackfin sizes.
will "custom" fabricate a skeg guard for your boat for a reasonable price and it will cost less than a new prop and allot less than a new
It took the entire tube to fill the skeg to 1/2" from the top. Instructions said to use
duct tape to hold it in place on the motor.
With the skeg guard it’s easy to effectively protect your existing skeg and prevent damage from costing you hundreds of dollars.
Take your horizontal measurement and match it to one of the three Blackfin sizes.
Use a skeg guard and keep your boat on the water and not on a wait list at your local boat repair shop.
Getting your skeg back to it’s original shape and size is more important than you think.
A skeg guard is a custom built stainless steel cap that protects and or repairs your motors skeg
in the skeg to mount the guard provides a nice shear point for when you do hit another rock, amazing, the skeg breaks off right where the holes are