(a public sector enterprise) - central electronics limited spd f.pdf · eoi no....
TRANSCRIPT
EOI No. C-2(b)/EOI/302/172/2017
CENTRAL ELECTRONICS LIMITED
(A Public Sector Enterprise)
EXPRESSION OF INTEREST
For
Registration of Vendors
For
Supply of various items
For
Systems Production Division (SPD)
EOI No. C-2(b)/EOI/302/172/2017
Dated: March 7th
2017
Asstt. General Manager (MMD)
Central Electronics Limited, 4, Industrial Area, Saur Urja Marg, Sahibabad – 201 010 (UP) INDIA
Tel. No. 0091-120-2895144/45 Fax No. 0091-120-2895148 Email: [email protected] Website: www.celindia.co.in
Footer Page 1 of 47.
EOI No. C-2(b)/EOI/302/172/2017
CENTRAL ELECTRONICS LIMITED (A Public Sector Enterprise)
4, Industrial Area, Saur Urja Marg, Sahibabad – 201 010 (UP) INDIA Tel. No. 0091-120-2895144/45 Fax No. 0091-120-2895148 Email: [email protected] Website: www.celindia.co.in
NOTICE INVITING EXPRESSION OF INTEREST
Expression of Interest (EOI) is invited from the financially & technically capable
companies/suppliers/manufacturers having relevant experience for empanelment as suppliers for
the items given in Annexure-I with their respective drawings.
Companies/suppliers/manufacturers interested in supplying any or all the above items may submit
their sealed EOI in prescribed format (Vendor Registration Form- attached as Annexure-II) and a
demand draft for Rs.250/- in favour of “Central Electronics Limited, Sahibabad” payable at New
Delhi.
To save the paper and the environment, please DO NOT attach the complete EOI document. Only
the relevant drawing(s), Vendor Registration Form (printed on both sides) along with supporting
documents/credentials duly signed and stamped by the authorized signatory of the applicant
may please be attached. The single cover containing complete EOI should be superscribed with
the EOI No., due date and name of the item to be registered.
For any technical clarification/detailed information/query, please approach any of the following:-
1. Mr. S.K. Prasad (AGM-SPD-Production) Contact No.-0120-2895155/26 Extn. 237
E-mail : [email protected], [email protected]
OR
2. Mr. A.K.Bhatnagar (STM-PPC/SPD) Contact No. 0120-2895155/56 Extn. 227
E-mail ID :- [email protected], [email protected].
Document Control Sheet & Important dates are given in Annexure-III
For CENTRAL ELECTRONICS LIMITED
Sd-
Asstt. General Manager (MMD)
Footer Page 2 of 47.
EOI No. C-2(b)/EOI/302/172/2017
Annexure-III
Document Control Sheet & Important dates
EOI Reference No. C-2(b)/EOI/302/172/2017 dated 07.03.2017
Name of Organization Central Electronics Limited
Tender Type (Open/Limited/EOI/Auction/Single)
EOI
Tender Category (Services/Goods/works)
Goods
Type/Form of Contract (Work/Supply/ Auction/Service/Buy/Empanelment/Sell)
Empanelment
Payment Mode (Online/Offline) Online or Offline
Date of Issue/Publishing 07.03.2017 (17:00 Hrs)
Document Download/Sale Start Date 07.03.2017 (17:00 Hrs)
Document Download/Sale End Date 31.03.2018(11:00Hrs)
Bid submission Start Date 07.03.2017 (17:00 Hrs)
Last Date and Time for Submission of Bids
31.03.2018 (15:00Hrs)
Date and Time of Opening of Bids 15th and 30th of every month
Footer Page 3 of 47.
ANNEXURE-I DETAILED SPECIFICATIONS OF THE ITEMS
Sl. No.
Name of the Item Detailed Specifications Drawing No.
1. Ferrite Block i) Size: 58x54x14mm ii) Size: 55x44x9mm
P008026A4 P008026A4
2. PCB PCB Double Sided Card No.-596-1(21Khz), Size: 220 x 100mm 1.6TH., GLASS EPOXY, 70u Cu..Cladding (base Cu.)
--
3. IC i) IC SN54LS14J,14 Pin, DIP ii) IC SN54LS73AJ,14 Pin, DIP iii) IC CD 74HC73E, 14 Pin, DIP iv) IC SN74HC04N, 14 Pin, DIP v) IC SN74HC4020N, 16 Pin, DIP vi) IC LM139J, 14 Pin, DIP vii) IC SA555P/LM555/MC1555, 8 Pin, DIP viii) IC MC7812ACT, 3 Terminal Positive Fixed Voltage Regulator, 3 Pin,TO-221A-04 Case of M MC7812 ABT/MC7812BT/MC7812BTG of Semiconductor ix) IC CD4070BE, 14 Pin, DIP E-Pack x) IC LTC1144IN8, 8 Pin, DIP xi) IC 6N136/6N136M, 8 Pin, DIP xii) IC CD4013BE, 14 Pin, DIP xiii) IC CD4071BE, 14 Pin, DIP
-- -- -- -- -- -- -- -- -- -- -- -- -- --
4. Diode & Transistor i) Diode 1N4448 DO-35 Package, Hirel ii) Diode Zener CTZ3V0A(3V,5%,0.5W)DO-35 Case Hirel iii) Diode Zener CTZ5V1A(5.1V,5%,0.5W)DO-35 Case Hirel iv) Diode Zener CTZ5V6A(5.6V,5%,0.5W)DO-35 Case Hirel v) Diode Zener CTZ12A(12V,5%,0.5W)DO-35 Case Hirel vi) Diode Zener CTZ24A(24V,5%,0.5W)DO-35 Case Hirel vii) Transistor 2N 2222A TO-18 Case, Hirel viii) Transistor 2N 3019,TO-39 Case Hirel ix) Transistor 2N 5416 TO-39 Case, Hirel x) Diode 1N4007, D0-41P Package, Normal Grade
-- -- -- -- -- -- -- --
5. Cap. MPCAR MPCAR,0.022MFD, 0.047MFD, 0.1MFD,0.22MFD, 0.47MFD, 1.0MFD, 0.0068MFD, 100V,-5% to +5%, - 40 to +105 Degree Celcius
--
6. Banana Socket i) Banana Socket Red colour type: BS-2 ii) Banana Socket Black colour type : BS-2
-- --
7. Cap. PPPAR-C i) PPPAR-C 68000/73000/100000PFD, 250V, -2% to +2%, - 40°C to + 85°C ii) PPPAR-C 1000/2200/18000PFD, 100V, -5% to +5%, - 40°C to + 85°C iii) PPPAR-C 1000PFD,100V, -20% to +20%, - 40°C to + 85°C
-- -- --
Footer Page 4 of 47.
8. Relay Type: PCB Mounting
i) Relay Type: 46-05-2CE, 05V, Coil-167 Ohm DIP OR 310205RA PCB Mounting Type, Coil -126 Ohm DIP ii) Relay Type : 46-12-2CE, 12V, Coil-960 Ohm DIP iii) DIP Switch 4-way GOLD plated , Type No.27S-044
-- -- --
9. LED i) LED 03mm,Green, Diffused High Intensity, Type-KL33LBYGD1R-N ii) LED 03mm,Yellow, Diffused High Intensity, Type-KL33LBYYD2R-N iii) LED 03mm,Red,Type-KL33HBHRL3N- N/KL33SBLRD6R-M iv) LED 05mm,Green,Diffused High Intensity, Type-KL53LBYGD1N-N v) LED 05mm,Yellow,Diffused High Intensity, Type-KL53LBYYD2N-N vi) LED 10mm, Green, Diffused High Intensity, Type-KL10HBYGL1N-S vii) LED 10mm, Red, Diffused High Intensity, Type-KL10HBHRL3N-N/KL10SBLRL6N-M
-- -- -- -- -- -- --
10. DC-DC Convertor i) DC-DC Converter Card for SSDAC S008543A3, F008542A3 & F007839A3
ii) DC-DC Converter Card(6) for HASSDAC, CARD NO.-697
S008856A3, F008542A3, F007839A3
iii) DC-DC Converter Card(12) for HASSDAC. CARD NO.-697
S008856A3, F008542A3, F007839A3
11. ENCAP Resin & Hardner i) ENCAP Resin, Colour Clear,1.5Kg Packing ii) Hardner RP,0.5Kg Packing
-- --
12. Handle: Mechanical Components
i) Handle ii) Spacer for Handle iii) LED Holder with spacer for dia 10mm iv) LED Holder with Nut v) Module Locking Screw M4 vi) Nut CLEAT M4 vii) Handle (Assembled)
P001858A4 P001842A4 P005065A4 P004092A4 P002189A4 P00061A3 K001879A4, F001876A4, F001877A4, F001878A4
13. M S Hardware i) Bolt Hex M10 x 40L, M.S Zinc Passivated ii) Bolt Hex M16 x 70L, M.S Zinc Passivated iii) Nut Hex M10, M.S Zinc Passivated iv) Nut Hex M16,M.S Zinc Passivated v) Washer Plain M10, M.S Zinc Passivated vi) Washer Spring M10, M.S Zinc Passivated vii) Washer Spring M16, M.S Zinc Passivated
P008427A4 P008427A4 -- -- -- -- --
14. Inductor Type-744772471
Inductor Type-744772471 --
Footer Page 5 of 47.
15. Surge Arrestor i) Plug for power line protection for 24V, Type PT 2-PE/S-24AC-ST Part No. 2839318 of Phoenix or Type-VF-24V (Plug & Base) ii) Plug for power line protection for 48V Type PT 2-PE/S-60AC-ST Part No. 2839321 of Phoenix OR Type VF-60V (Plug & Base) iii) Surge Arrester Base Type PT-BE/FM: Part No. 2839282 iv) Plug for modem line protection device Type VAL-MS-350 VFST Part No. 2856595 of Phoenix or V20-VA/1 v) Surge Arrester Base Type VALMS-BE: Part No. 2817741
-- -- -- -- --
16. Transformer i) Transformer T-022 ii) Transformer T-021M iii) Transformer T-006 iv) Transformer T-007 v) Transformer T-006M vi) Inductor L-006 vii) Inductor L-004
T008387A4 T008385A4 T008370A4 T008372A4 T008371A4 T008363A4 T005827A4
17. LCD i) LCD 20 Chr.x2 row duty cycle16,Glass Type ST Green Colour, back lit Type- TYPE-ODM20216SLW/T3/YP6V1 OR CDM20216 STGNBLW1 ii) LCD Module with back light Type:- CDM162 16B STGNBLW LCD Module with back light Type: ODM162 16-9 SLW(15-GND, 16-VCC)
E008603A4 --
18. Transmitter & Receiver Body
i) Transmitter Body (Phase) with Cap ii) Receiver Body (Phase) with Cap iii) Transmitter Body (Amplitude), with Cap iv) Receiver Body (Amplitude) with Cap
P007672A3 P008495A4 P008512A1 P007670A3 P008533A3
19. S S Hardware i) Bolt Hex M12 x 100L,SS ii) Bolt Hex M12 x 120L,SS iii) Nut Hex M12,SS iv) Washer Plain M12,SS v) Washer Spring M12,SS vi) Nut Hex Nylock M12,SS
-- -- -- P008212 -- --
20. Essen Connector i) Flat Cable box Header 16 Pin Straight (PCB Mounted), Type PB-16S-2P ii) Flat Cable box footer 16 Pin, Type PS 16 R2 iii) Flat Cable box header 10 Pin Straight (PCB Mounted),Type PB-10S-2P iv) Flat Cable box footer 10 Pin, Type PS 10 R2 v) D-Subminiature Connector- Male, PC Straight Solder Type 9 Pin, Type - M09P124
-- -- -- -- --
Footer Page 6 of 47.
21. Key Actuator and Elements
i) Key Actuator Switch lockable in out position Ty.-SS91522 with all diff. key in batch (non inter changable up to 50 nos.) ii) Contact element (with 1 NO & 1NC contacts) for key actuator Type SS90375
-- --
22. UM Profile i) UM PROFILE. TYPE-UM100-PROFILE ORDER NO.-2952020/2914563 OR Housing Part No.4144870000_PF_RS_100_ 2000MM_A.1 for DIN Rail Mounting OR Mount Carrier Type2, 106mm/4.17 in wide for DIN Rail Mount of 100MM wide PCB Order Code 288-620 ii) UM PROFIL TYPE-UM108-SEFE/L ORDER NO.-2959696 OR End Plate for mount. Rail inst. type AP100 Order No.1185060000 Or Lateral Cover Type2, Part No. 288-621 iii) UM PROFILE. TYPE-UM108-SEFE/R ORDER NO.-2959683 OR Locking foot type RF 180, Part No. 1324460000 OR Fixing foot for DIN 35 Rail, Part No. 288-622
-- -- --
23. Worm Drive Hosp Clamp i) Worm Drive Hose Clamp (Screw Operated), Zn. Passi (Yellow). size code-1A Mat:-M.S OD OF HOSE (22-30mm)
P006180A4
24. PCB Terminal i) PCB Terminal Str. 2 pole 5.08 spacing, TYPE: MKDSN 1.5/2-5.08 ii) PCB Terminal Str.3 pole 5.08 spacing, TYPE: MKDSN 1.5/3-5.08
-- --
25. Hose Pipe i) Hose Pipe P007787A4
Footer Page 7 of 47.
EOI No. C-2(b)/EOI/302/172/2017
Fax : 0120-2895148 Phones : 0120-2895145,
Factory : 011-23549336 0120-2895144, 2895155/6
E-Mail : [email protected] Extension : 349
CENTRAL ELECTRONICS LIMITED
A PUBLIC SECTOR ENTERPRISE
4, INDUSTRIAL AREA, SAHIBABAD – 201 010 (UP)
VENDOR REGISTRATION FORM S.No. VENDOR REGISTRATION NO……………..
(To Be Filled by CEL) …………………………..
Tick the appropriate Column, wherever required :-
1. a) Name of the Firm _____________________________________________
b) Nature of your business Manufacturer Dealer Trader
(Authorisation certificate from the principals for dealership etc. must be enclosed)
c) Areas of supplies you are interested in
2. Name of the Chief Executive/Proprietor _________________________________
3. Addresses
Factory Head Office Delhi Office, if any
__________ __________ __________
__________ __________ __________
Footer Page 42 of 47.
EOI No. C-2(b)/EOI/302/172/2017
Telephone Nos. ----------------------------------------
Fax No. & E-mail -------------------------------------
4. Name, Designation, Address ----------------------------------------
Phone no. & Fax No. of the ----------------------------------------
Contact Person ----------------------------------------
5.a) Registration No. with
Directorate of Industries: ------------------------------------------
b) In case you are covered under SSI,
Give Reg. No -------------------------------------------
c) Status of the firm: Proprietory Partnership
6. (I) DETAILS OF FACTORY / FIRM
a) Total Area of the factory -----------------------------------------------
b) Covered Area and Type of construction -----------------------------
c) Power connected --------------------------------------------------------
d) Capacity of the generator, if available -------------------------------
(II) FINANCIAL BACKGROUND
a) Investment in Plant and Machinery
b) Investment in Building and Infrastructure
c) Funds available for meeting work in capital
d) Source of funds
I) Own Capital II) Borrowed Capital
e) Banker’s Name & Address -----------------------------------------------
Footer Page 43 of 47.
EOI No. C-2(b)/EOI/302/172/2017
III) Commercial Application
a) Sales Tax registration number
State
Central
b) Excise registration number
c) Have you obtained income tax clearance certificate? If so, please enclose a copy
of the same showing the details for the last three years.
7. a) PRODUCTION EQUIPMENT AVAILABLE (for the items for which
registration is sought )
S.No Name of
the
machine
Capacity Make
&
Model
Age of
Machine
Accuracy No. of
machine
Available
This Information may be given on a separate sheet strictly as per the
format.
b) Furnish the details of tooling facilities available
8. QUALITY FACTORS
a) Test and Inspection equipment available (for items for which registration is
sought)
S.No Details of
the Test
Equipment
Make Age of
Test
Equipment
Accuracy No. of
Equipment
available
This Information may be given on a separate sheet strictly as per the Format.
Footer Page 44 of 47.
EOI No. C-2(b)/EOI/302/172/2017
b) Details of procedures adopted for
i) Inward inspection for the bought out items
ii) In process / Stage inspection
iii) Final inspection
iv) Calibration of test and measuring equipment
9. QUALITY APPROVALS
a) Are you an ISO-9000 Certified company Yes No
If yes, please enclose copy of the certificates
b) Are your products are BIS approved Yes No
If yes, furnish certificates
c) Do your firm is approved for any other certifications like
LCSO, CACT, RDSO or C-DOT ?
10. DETAILS OF MAN POWER EMPLOYED
Technical Nos. Non-Technical Nos.
Graduate Engineers
Graduates
Diploma Holders Other Staff
ITI Total Employees
11. TURNOVER IN THELAST THREE YEARS
(Copies of balance sheets be enclosed)
12. Organizations to whom similar items are supplied in the last three years.
Detail
Organizations
Details of items
supplied
P.O. No. Date and
Value
Remarks w.r.t.
the execution of
the order
Separate Sheet may be enclosed.
Footer Page 45 of 47.
EOI No. C-2(b)/EOI/302/172/2017
13. Latest Vendor rating given to you by your major customers.
14. SUPPLIES TO CEL
Year Items
Supplied
P.O. No.
& Date
Remarks w.r.t. the
execution of the order
Separate Sheet may be enclosed
.
15. Any other information would you like to give.
16. List of enclosures may please be given.
I CERTIFY THAT THE INFORMATION GIVEN HEREININCLUDING
THE ENCLOSURES IS CORRECT TO THE BESTOF MY KNOWLEDGE.
(Signature of the Proprietor)
Seal of the concern
-----------------------------------------------------------------------------------------
CENTRAL ELECTRONICS LIMITED,
SAHIBABAD
Date: …………………
Acknowledgement
Received Vendor registration form, S. No…………………………… from
M/s ……………………………………………………. Along with -----------
…………………………………. No. of enclosures. Further information
about the approval of the firm, will be informed to you in due course of
time.
Footer Page 46 of 47.
EOI No. C-2(b)/EOI/302/172/2017
For CENTRAL ELECTRONICS LIMITED
VENDOR EVALUATION SHEET
1. Name of the organisation / factory visited.
2. Date of visit by CEL team:-
3. Members of the team: -
S.NO. NAME DESIGNATION
1.
2.
3.
4.
2. Observation of the team:-
a) Facilities for supplying the item required
-----------------------------------------------------------------------------------------
b) Technical capabilities i.e. suitable manpower etc.
-----------------------------------------------------------------------------------------
5. Recommendation:
6. Member’s Signatures
Forwarded for approval of Competent Authority
Sahibabad
Date---------
Footer Page 47 of 47.