a project on report ocb switching
TRANSCRIPT
-
8/12/2019 A project on report ocb switching
1/29
-
8/12/2019 A project on report ocb switching
2/29
SUMMER TRAINING REPORTHELDAT
BSNL
-
8/12/2019 A project on report ocb switching
3/29
INDEX
1. COMPANY PROFILE
2. INTRODUCTION
3. ABOUT THE EXCHANGE
4. MDF
>TYPES OF FAULTS
>PROTECTIVE DEVICES
5. OCB
6. GSM
7. MEDIA
8. PROCEDURE FOR HANDLING COMPLAINTS
-
8/12/2019 A project on report ocb switching
4/29
INTRODUCTION
Today, BSNL is the No. 1 telecommunication company and thelargest public sector undertaking of India and its responsibilitiesincludes improvement of the already impeccable quality oftelecom services, expansion of telecom services in all villages andinstilling confidence among its customers.
EXCHANGE:
Equipment which effects interconnected of telephones is knownas switching equipment.
The switching centre, which houses the terminating and switchingequipment is called telephone exchange.
-
8/12/2019 A project on report ocb switching
5/29
EXCHANGE LAYOUT
Typical exchange consist of :
Switch Room
Operations and Maintenance (OMC) RoomInput Output processor (IOP) Room
Power Plant Room
Battery Room
Main Distribution Frame (MDF) Room
-
8/12/2019 A project on report ocb switching
6/29
ABOUT THE EXCHANGE
1. All telephone subscribers are served by automaticexchanges.
2. Todays automatic exchanges uses a pair of computers.
One, running the program that provides services.
Second, monitoring the operation of the first, ready totake over in a few seconds in the event of equipmentfailure.
Various exchanges present in BSNL are:
> C-DOT> OCB> EWSD
-
8/12/2019 A project on report ocb switching
7/29
MAIN SECTIONS OF EXCHANGE:
There are three components of exchange:
MDF
Power plant
Switching Room.
-
8/12/2019 A project on report ocb switching
8/29
MAINDISTRIBUTIONFRAME(M.D.F) :
INTRODUCTION:
- MDF means Main Distribution Frame. Local cablecontact at MDF .
- All types of cables out to the door contactconnection at MDF .
-
8/12/2019 A project on report ocb switching
9/29
THEMAINPARTSOFTHEPOWERROOMARE:
1. BATTERIES
2. UPS (UNINTERRUPTEDPOWERSUPPLY)
3. CHARGING- DISCHARGINGUNIT
4. INVERTERANDCONVERTERUNIT:
POWER PLANT :
-
8/12/2019 A project on report ocb switching
10/29
SWITCHING ROOM :
Switch room consists of BM and CMcabinets mounted in standard switch.
These cabinets are fastened to a switchRoom and interconnected by cables.
-
8/12/2019 A project on report ocb switching
11/29
.
MAIN DISTRIBUTION FRAME
> The primary function of MDF is to remove fault. It
is also known as Fault Remove Section.
> The telephone numbers are also disconnected inthe MDF because of some specific reason.
ORGANISATION OF THE MDF
Vertical sideHorizontal side
-
8/12/2019 A project on report ocb switching
12/29
VERTICAL SIDE
RACK: -On the rack, the tags are situated. One rack is having eight tags.The counting is done from up (0) to down (7).
TAGS: -Each rack consists of eight tags.
1 tag = 4 core1 core = 4 bunch
1 bunch = 2 line
N.E.:-The word NE stands for the NUMBER OF EQUIPMENT.
It is used for testing number and
WEDGE: Wedge is used as a device for checking the ring. Wedge isplaced in jack strips, which is connected to telephone for checking.
-
8/12/2019 A project on report ocb switching
13/29
HORIZONTAL SIDE:
The horizontal side connected to the underground cable.This cable is having 100 pairs. These pair is distributed
when we allot the telephone number to the subscriber.
Horizontal side is again subdivided in two parts:
One part is connected with the vertical side.Another with the subscriber line by using 100 pair
underground cable.
-
8/12/2019 A project on report ocb switching
14/29
CONSTRUCTION OF M.D.F:-
Main distribution frame is mainly divided intwo parts.
(1) Vertical Side or Line side.
(2) LEN side or Exchange side.
-
8/12/2019 A project on report ocb switching
15/29
VERTICAL SIDE:
All the part from vertical side to the subscriber are generallycalled outdoor section.:
1. One vertical has 10 tag blocks.
2. Each tag block has 10 rows and each row has 10 tags. So
each tag block has 100 tags.
3. Connection between vertical side & subscribers are
provided by jelly filled cables.
4. These wires are first terminated in cabinet box, then
according to requirements the group of the wires (e.g. 200
wires, 100 wires etc.) is terminated in pillar box
-
8/12/2019 A project on report ocb switching
16/29
LEN SIDE:
All the parts from LEN to the exchange is called indoorsection.
The connection of subscriber from exchange is
terminated on this side of MDF.
In 1 tag block there are 128 tags. Each tag block is
divided in 4 segments. That is 0, 1,2 & 3 and in each
segments.
-
8/12/2019 A project on report ocb switching
17/29
.DIFFERENT TYPES OF FAULTS:-
LOOP FAULT:-IFTWOWIRESAREJOINEDTOGETHERBECAUSEOFIMPROPER
CONNECTION,
STORMINGAIRETC.
EARTH FAULT:-IFTWOWIRESGETSCRAPEATSOMEPLACESANDIFTHIS
WIRECOMESINCONTACTWITHTREE, PILLARORANYMETALOBJECTSTHENTHISTYPEOF
FAULTOCCURS.
CABLE FAULT:-FOROUTDOORCONNECTIONS, JELLYFILLEDWIRESARE
USEDWHICHAREAFFECTEDBYNATURALCAUSESSUCHASRAIN, EARTHQUAKEETC. ATSUCHTIMETHISFAULTOCCURS.
DISCONNECT FAULT:-THISTYPEOFFAULTOCCURSDUETOTHEBREAKING
OFWIRESBETWEENTHEVERTICALSIDE& LEN SIDE.
-
8/12/2019 A project on report ocb switching
18/29
PROTECTIVE DEVICES USED IN M.D.F
.
Fuses
Gas Discharge Tube(G.D Tube)
Insertion Tool
Wires
-
8/12/2019 A project on report ocb switching
19/29
OCB
The new switching systems are based on Stored ProgramControl concept. The call processing programmers are
distributed over different control organs of the system and are
stored in ROM/RAM of the units Processor in the control units
.
Features:
It is a digital switching system.
The system supports all the existing signaling system .
The system has auto recovery feature. When a
serious fault occur in control unit, it gives a message to
SMM (operation & maintenance unit).
-
8/12/2019 A project on report ocb switching
20/29
GLOBAL SYSTEM FOR MOBILE COMMUNICATION
GSM)
Global system for mobile communication (GSM) is a globally
accepted standard for digital cellular communication. GSM is
the name of a standardization group established in 1982 to
create a common European mobile telephone standard
GSM is a cellular network which means that mobilephones connect to it by searching for cells in the immediate
vicinity.GSM operates in the 900 MHz frequency band.
-
8/12/2019 A project on report ocb switching
21/29
THEREAREFIVEDIFFERENTCELLSIZES INA
GSM NETWORK-
Macro CellsMicro CellsPico CellsFemto Cells
Umbrella Cells
-
8/12/2019 A project on report ocb switching
22/29
-
8/12/2019 A project on report ocb switching
23/29
GSM : (SYSTEM ARCHITECHTURE)
-
8/12/2019 A project on report ocb switching
24/29
BASIC BUILDING BLOCKS:
Mobile Station (MS)
Base Station (BS)
Mobile services Switching Center (MSC)
Databases
Operation and Maintenance Center (OMC)
-
8/12/2019 A project on report ocb switching
25/29
SYSTEM CAPACITY
Shannons Theory predicts the maximum amount of
information that can be transmitted over a channel with
given BW & SNR.
The optimum usage of given BW is obtained when the
signal are noiselike & min SNR.
Hence for increased capacity the choice isCDMA.
-
8/12/2019 A project on report ocb switching
26/29
MEDIA: -
1.Carrier system
2. Co-axial Cable
3. Optical Fiber Cable(OFC).
4. Satellite.
-
8/12/2019 A project on report ocb switching
27/29
PROCEDURE FOR HANDLING
SUBSCRIBER COMPLAINTS
Telephone Dead:
Case--I Problem concerns a particular subscriber.Case-II Quit a few numbers of telephone reported dead:
Telephone Held-Up ( No Dial Tone ):
-
8/12/2019 A project on report ocb switching
28/29
> PERMANENT RING
> PERMANENT DIAL TONE
> PERMANENT BUSY TONE
> PERMANENT RINGTRIP
> SPEECH QUALITY POOR
> WRONG NUMBERS
> ONE WAY SPEECH
> RINGER CADENCE
-
8/12/2019 A project on report ocb switching
29/29
THANK YOU