a meber of alao group a member of alamo group ......a member of alamo group interchangeable think of...
TRANSCRIPT
A Member of Alamo Group
BUCKET
FLAIL: Grass & Light Brush FLAIL: Brush & Saplings
» 51” Cutting Width » For cutting grass & light brush » Equipped with Y-Knife blades for light duty cutting
» Heavy Duty Front Bucket Kit » 55” Operating Width » For movement of dirt and lightweight material » If using the bucket on concrete, rubber tracks must be installed on the unit
» 51” Cutting Width » For cutting brush & saplings » Equipped with Hammer Knife blades for heavy duty cutting
INTERCHANGEABLE ATTACHMENTSThink of the possibilities.
A Member of Alamo Group
STUMP GRINDER » For removal of tree stumps » Cutting Wheel Diameter: 14.57”
A Member of Alamo Group
INTERCHANGEABLE ATTACHMENTSThink of the possibilities.
SNOW BLADE
HITCH RUBBER TRACKS
SNOW BLOWER
This information is intended to be of a general nature only; specifications are subject to change without notice as we continue to improve our products.
©Alamo Group Inc. Alamo Industrial is a registered trademark of Alamo Group Inc. TRAXX™RF is a trademark of Alamo Group. Inc.
www.alamo-industrial.com [email protected] 1-800-882-5762 1502 East Walnut St., Seguin, Texas 78155
» 66” Blade Width» For movement of snow
» For turf & applications where spikes would be too aggressive» These tracks must be installed on the unit if using the bucket attachment on concrete
» Used to couple light duty trailer to main power unit
» 55” Working Width» For removal of snow
R 3-28-14 GS
A Member of Alamo Group