1

A I T E C H Accreditation of Innovative Technologies for Housing

TABLE OF CONTENTS

I. BACKGROUND

II. AITECH COMMITTEE MEMBERS AGENCIES

III. OBJECTIVES OF THE AITECH INTER-AGENCY COMMITTEE

IV. SCOPE OF WORK AND FUNCTIONS OF THE AITECH INTER-

AGENCY COMMITTEE

V. ROLES AND RESPONSIBILITIES OF PARTICIPATING AGENCIES

VI. DEFINITION OF TECHNOLOGY

VII. CRITERIA FOR ACCREDITATION

VIII. STEPS IN ACCREDITATION

IX. PROCESS FLOW CHART

X. CHECKLIST OF REQUIREMENTS FOR ACCREDITATION

A. Building System

B. Material Only

XI. CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES

APPLIED FOR AITECH ACCREDITATION

XII. SCHEDULE OF FEES

XIII. LIST OF ACCREDITED TECHNOLOGIES

2

I. BACKGROUND AITECH stands for Accreditation of Innovative Technologies for Housing. It is a system for accrediting innovative technologies for housing. AITECH was conceived as a result of the numerous building technologies that have been developed in the last few years using non-traditional or alternative materials and systems. Cognizant of their potential in reducing over-all housing costs, it has become imperative to accredit these innovative technologies for low-cost housing. AITECH responds to queries and requests from private manufacturers of indigenous and innovative building materials/systems for technical and engineering evaluation leading to accreditation of these products. The AITECH Inter-Agency Committee reviews and accredits the technologies.

II. COMMITTEE MEMBERS

The AITECH Committee is composed of the following agencies:

Housing and Urban Development Coordinating Council (HUDCC)

National Housing Authority (NHA)

Department of Science and Technology (DOST)

Home Guaranty Corporation (HGC)

Department of Public Works and Highways (DPWH)

Housing and Land Use Regulatory Board (HLURB)

Home Development Mutual Fund (HDMF)

National Home Mortgage Finance Corporation (NHMFC)

Construction Industry Authority of the Philippines (CIAP)

Department of Trade and Industry – Bureau of Product Standards (DTI – BPS)

University of the Philippines – Building Research Service (UP – BRS)

III. OBJECTIVES OF THE COMMITTEE The AITECH Committee acts as a review and approving body for applications for accreditation of innovative technologies appropriate for housing. Its main objective is to assist producers of innovative technologies in securing acceptance of their products or systems in the market as well as to make these technologies acceptable for funding under government housing loan programs. The Committee also aims to encourage and promote the use of innovative technologies as an alternative to traditional housing construction system; and to develop standards, guidelines, and procedures for accreditation system.

3

IV. SCOPE OF WORK AND FUNCTIONS OF THE COMMITTEE The AITECH Committee reviews applications for accreditation of new and improved technologies which are appropriate for housing and can serve as alternatives to traditional or conventional building technologies. The Committee performs the following functions:

1. Review and approve applications for materials testing and engineering and economic evaluation of local and/or foreign innovative housing technologies;

2. Provide services as testing, wherein evaluating agencies conduct the necessary validation on innovative technology systems / materials;

3. Issue certificates of validation and / or accreditation to manufacturers / owners of approved innovative technology systems / materials;

4. Issue implementing guidelines and procedures on the said accreditation system for public dissemination;

5. Determine the amount of processing fee to be charged by testing / evaluating agencies for the information of applicants;

6. Establish performance and cost standards and identify relevant tests for building materials / systems as the basis for evaluating and accrediting innovative technology systems / materials;

7. Review appropriate applications of new technologies and use of innovative building materials;

8. Provider a short-list of accredited building technologies to funding institutions and dissemination of information to other possible end-users; and

9. Undertake such other functions as may be necessary to disseminate information to support its primary functions.

V. ROLES AND RESPONSIBILITIES OF PARTICIPATING AGENCIES The roles and responsibilities of participating agencies are:

1. HUDCC – gives final approval for issuance of accreditation certificate. The HUDCC Chairman affixes his signature on the certificate.

2. NHA – evaluates applications based on checklist of requirements; refers to evaluating agencies (UP-BRS, DOST, DPWH); evaluates and validates costs and structural designs; and consolidates evaluation results. Also assigned as AITECH secretariat.

3. DOST-PCIEERD – evaluates materials properties (physical, mechanical behavior, etc); and conducts research and development of new technologies.

4. HGC – appraises housing unit.

4

5. UP-BRS – evaluates structural designs, properties of building materials, and overall technical feasibility of technologies, and conducts information dissemination.

6. DPWH-BRS – evaluates structural designs and properties of building materials.

7. HDMF – reviews and accepts accredited technologies for mortgage financing under UHLP and HDMF housing loan programs.

8. NHMFC – reviews and accepts accredited technologies for mortgage financing under UHLP.

9. CIAP – disseminates information; and includes applicable technologies in the Modular Coordination System.

10. HLURB – evaluates technologies for compliance with housing standards based on BP 220 / National Building Code.

11. DTI-BPS – monitors quality of production through regular inspection of local production plants; and takes charge of patenting technologies.

VI. DEFINITION OF TECHNOLOGY

The term “technology” refers to (1) new production processes of existing systems/materials; (2) new construction techniques applied or utilized in low-cost housing units; and (3) new building materials designed to serve as alternatives to traditional or conventional components. The technologies considered for application are the following:

1. Locally developed and manufactured building systems / materials appropriated for housing including their construction techniques / systems; and

2. Building systems / materials developed in other countries, whether being introduced to the country or have been adopted and manufactured locally with or without modifications.

VII. CRITERIA FOR ACCREDITATION Innovative technologies include local and international technologies that use non-traditional or alternative materials or system with significant reductions in construction costs (thereby insuring affordability) as opposed to the use of conventional materials and systems (e.g. concrete hollow blocks). In addition, innovative technologies place emphasis on environmental considerations. Evaluation of Committee member agencies are based on the following:

a) Compliance to housing standards based on BP 220, PD 957 and the National Building Code, Fire Code, BP344 & other applicable laws;

b) Structural evaluation / validation of submitted structural designs (based on design load and allowable applied stresses);

5

c) Cost effectiveness based on the resulting construction costs (current cost estimates of housing construction inclusive of mark-up) as compared with housing units built with conventional building technologies. Use of special equipment and costs of transport shipment of materials should also be incorporated in cost estimates;

d) Appraisal / validation of housing units using the technology for mortgage acceptance by funding institutions;

e) Physical properties and structural soundness of technologies in relation to health consideration and suitability to local climactic and topographic conditions;

f) Locally available raw materials for the production / use of particular technologies; and

g) Consistency of required quality in mass production.

VIII. STEPS IN ACCREDITATION

Technology evaluation shall be based on the information provided in all documents submitted to the AITECH Secretariat as well as on plant and site inspection conducted by the AITECH member-agencies. The steps in accreditation are as follows:

1. The proponent submits AITECH accreditation application. 2. AITECH Secretariat receives application and reviews attached

documents if complete. 3. If documents are complete, AITECH Secretariat issues Order of

Payment for Evaluation Fee. 4. NHA-HTDO evaluates compliance to standards, structural design,

cost evaluation or seek assistance of support agencies. Forward to DPWH, ASEP for complicated structural analysis, and / or to UP – BRS / DPWH – BRS / DOST for testing.

5. Conduct of Site/Plant visit and Inspection. 6. AITECH Secretariat prepares Consolidated Report and

Recommendation to be submitted to GM for endorsement to HUDCC Chair.

7. GM to endorse the recommendation for AITECH accreditation to HUDCC Chair. HUDCC Chair approves recommendation and signs AITECH accreditation certificate.

8. Secures approved AITECH accreditation certificate and informs proponent.

6

IX. PROCESS FLOW CHART

.

V

PROCESS FLOW CHART

ACCREDITATION OF INNOVATIVE TECHNOLOGIES FOR HOUSING

(AITECH)

Submits AITECH Accreditation Application

AITECH Secretariat receives application and reviews attached

documents if complete

If documents are complete

Pays fee and returns copy of receipt

AITECH Secretariat issues Order of Payment for Evaluation Fee

NHA-HTDO evaluates structural design/cost evaluation or seek assistance of support agencies

Forward to DPWH, ASEP for complicated structural analysis, and/or to UP-BRS/DPWH-BRS/DOST for testing

AITECH Secretariat prepares Consolidated Report and

Recommendation to be submitted to GM for endorsement to HUDCC

Chair

GM to endorse the recommendation for AITECH Accreditation to HUDCC Chair

HUDCC Chair approves recommendation and signs AITECH

Accreditation Certificate

Secures approved AITECH Accreditation Certificate and

informs Proponent

Receives signed/approved AITECH Accreditation Certificate*

* Yearly monitoring of the accredited technology is being conducted by AITECH Secretariat

PROPONENT NHA OTHER AGENCIES

7

X. CHECKLIST OF REQUIREMENTS FOR ACCREDITATION A. BUILDING SYSTEM

(3 Sets for each item, except for the sample material)

1. Building Technology Proposal (Application Form) 2. Company profile supported with Registration Certificate from SEC

for corporations, DTI for sole proprietorship or CDA for cooperatives 3. Audited Financial Statements which shall include Accountants

Statement and Income Tax Return stamped and duly received by the BIR

4. Technology Brochures 5. Sample Material 6. Economic Life Span/Signed Certificate of Warranty 7. Test Results (Fire Resistance Test, Moisture Resistance Test,

Compressive Strength Test, and other tests needed in the technical evaluation shall be conducted by the ff. accredited testing agencies / laboratories:

Tests Accredited Testing Agencies Moisture Test MATEST Laboratory Services, Inc. Telefax # 640-0770 / 642-0664 Compressive & Tensile Test DOST, UP-BRS Tel # 981-8100 Fire Test Forest Product Research & Dev’t Inst. (FPRDI) Tel # (049)536-2377, 536-2586

536-2360 Fax # (049) 536-3630 Water Test Laguna Lake Dev’t Authority (LLDA)

Tel # 286-6143 / 286-6123 Note: Foreign Trade results shall be accompanied by a letter of Certification from the Philippine Embassy where the test was conducted.

8. Copy of Title of Patent (if applicable) 9. Technical Manual

10. White / Blue print of signed and sealed Building Plans (3 sets – 20” x 30” and 3 sets – A3) Architectural by Registered License Architect / Structural Plans by Civil engineer or Structural Engineer

11. Building Specifications signed and sealed 12. Bill of Material / Cost Estimates (Direct Cost) and Selling Cost per unit signed and sealed

13. Cost comparison between the applied innovative technology / material and the conventional 14. Structural Design Analysis and Computation in Metric System signed

and sealed by Structural Engineer 15. Photocopy of License of the Engineer / Architect 16. List of Completed and On-going Projects using the applied

technology / material 17. Ocular inspection of Plant, Completed and On-going Projects using

the applied technology

8

B. MATERIALS ONLY (3 Sets for each item, except for the sample material) 1. Building Technology Proposal (Application Form) 2. Company profile supported with Registration Certificate from SEC for

corporations, DTI for sole proprietorship or CDA for cooperatives 3. Audited Financial Statements which shall include Accountants Statement

and Income Tax Return stamped and duly received by the BIR 4. Technology Brochures 5. Sample Material 6. Economic Life Span (Signed Warranty) 7. Test Results (Fire Resistance Test, Moisture Resistance Test, Compressive Strength Test, and other tests needed in the technical

evaluation shall be conducted by the ff. accredited testing agencies / laboratories:

Tests Accredited Testing Agencies Moisture Test MATEST Laboratory Services, Inc.

Telefax # 640-0770 / 642-0664 Compressive & Tensile Test DOST, UP-BRS Tel # 981-8100 Fire Test Forest Product Research & Dev’t Inst. (FPRDI) Tel # (049)536-2377, 536-2586

536-2360 Fax # (049) 536-3630 Water Test Laguna Lake Dev’t Authority (LLDA)

Tel # 286-6143 / 286-6123 Note: Foreign Trade results shall be accompanied by a letter of Certification from the Philippine Embassy where the test was

conducted. 8. Copy of Title of Patent (if applicable) 9. Technical Manual 10. Bill of Material / Cost Estimates (Direct Cost) and Selling Price 11. Cost comparison between the applied innovative technology / material and the conventional 12. List of Completed and On-going Projects using the applied technology / Material 13. Ocular Inspection of Plant, Completed and On-going Projects using the applied technology

9

XI. CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES APPLIED FOR AITECH ACCREDITATION

(MATERIALS/BUILDING SYSTEM) I. Performance Specs

1. Materials Strength

Load Bearing

400 to 600 psi 10%

Above 600 psi 15%

Non-Load Bearing

300 psi 5%

Above 300 psi 10%

2. Fire Rating

One (1) hour fire resistant 5%

Above 1 hour fire resistive rating 10%

3. Moisture

Non-Resistant 0%

Resistant 10%

4. Economic Lifespan

Below 5 yrs fail

5 to 20 yrs 5%

21 to 34 yrs 8%

35 years above 10%

5. Adaptability to Other Technologies

Non adaptable (closed system – requires special design when inter-connected with other building materials)

0%

Adaptable (open system – can be easily connected with other building materials)

10%

6. Green Component

With component 0%

Without Component 10%

II. Cost compared to Conventional Construction

Below 5% fail

6 to 14% 5%

15% to 20% 10%

Above 20% 15%

III. Housing Production Rate compared to Conventional Construction

Below 10% Faster 0%

10 to 20% Faster 5%

Above 20% Faster 10%

10

IV. Production Capacity(No. of Units Supplied/Delivered per month)

Availability of local material 5%

Existence of local plant and warehouse 5%

Warehouse only with plant abroad 3%

V. Units Completed Using Technology

0 0%

Below 20 units * 5%

Above 20 units 10%

*20 units is defined as the number of housing units considered as mass housing (for discussion)

PROPOSED CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES APPLIED FOR AITECH ACCREDITATION

(FORMS/PAINT/SOIL STABILIZERS) I. Performance Specs

Adaptability to other Technologies

Non-Adaptable 0%

Adaptable 10%

II. Cost compared to Conventional

Below 5% fail

6% to 14 % 20%

15 to 20% 30%

Above 20% 40%

III. Housing Production Rate compared to Conventional Construction

Below 10% Faster 0%

10 to 20% Faster 20%

Above 20% Faster 30%

IV. Units Completed Using Technology

0 0%

Below 20 units 10%

Above 20 units 20%

*20 units is defined as the number of housing units considered as mass housing (for discussion)

11

PROPOSED CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES APPLIED FOR AITECH ACCREDITATION

OTHER BUILDING COMPONENTS (SEPTIC TANK / WATER TANK)

I. Performance Specs 1.1 Material Strength Tensile Strength

Below 15 MPa 5%

15MPa and above 15%

1.2 Economic Life Span

Below 5 years 5%

5 to 20 years 10%

Above 20 years 15%

II. Cost compared to Conventional

Below 10% 5%

10% to 20% 10%

Above 20% 20%

III. Production rate compared to Conventional

Below 10% Faster 5%

10 to 20% Faster 10%

Above 20% Faster 20%

IV. Production Capacity

Availability of local material 3%

Existence of local plant and warehouse 5%

Warehouse only with plant abroad 10%

V. Units Completed

0 0%

Below 20 units * 10%

Above 20 units 20%

*20 units is defined as the number of housing units considered as mass housing (for discussion)

* (40% to 60%) - One (1) year accreditation ** (61% to 100%) - Three (3) years accreditation XII. SCHEDULE OF FEES (subject to change)

1. One (1) to Four (4) Storey P 5,000.00 2. Five (5) Storey and Above P 12,000.00 3. Materials Only P 5,000.00

12

XIII. LIST OF ACCREDITED TECHNOLOGIES

1. Medium Rise Building System

MEGAWIDE CONSTRUCTION CORP.

Megawide Precast Concrete Building Technologies

The building technology uses high strength concrete for building elements such

as foundation, columns, beams, floors and partition walls. The construction

process is systematic that will entail shortened construction time and quality

workmanship. The precast walls using this technology enables a wide range of

visual appearances which brings out various profiles and textures thereby

bringing out the beauty of concrete.

SOLID GROUP TECHNOLOGIES CORP.

My House Modular Building Technology

My House Modular Building Technology uses lightweight steel structures

interlocked or bolted with metal sandwich and roofing panel. The wall panels are

color-coated steel sandwich board made of 32mm thick double-sided steel

sheets with expanded polystyrene at the mid layer while the roof panel are one-

sided or double –sided corrugated color-coated steel sheet with expanded

polyurethane foam that is being injected. The doors are profiled bar frames and

color-coated steel sandwich board and the windows are aluminium alloy frame

window with sliding and fixed glass window. Every part of this building system is

pre-engineered for a model type that is designed for easy transport and quick

construction and dismantling for re-use.

Contact Person: Mr. Beda T. Mañalac Contact No.: 843-1511 to 18 loc. 845 / 837-0195 to 98 F#: 840-3505 / 837-0264 Solid House Bldg., 2285 Chino Roces Ave., Makati City Validity Date: 29 November 2011 to 29 November 2016

Contact Person: Engr. Edgar Saavedra, President Contact No.: 655-1111 / 655-7958 / 655-9164 loc. 805 F#: 655-0974 20 N. Domingo St., Bgy. Valencia, Quezon City 1112 Validity Date: 21 March 2011 to 21 March 2016

13

E. FLORENTINO + ASSOCIATES

Modular Ferro- Concrete (MFC) Building System

Modular Ferro Concrete (MFC) Building System is a modular building system

creatively responding to housing and building needs. It is a standard building

system that is value-engineered, structurally conceptualized, guaranteed, quality

and time controlled. MFC combines and integrates structural sheet (light to heavy

structural shapes, plates, pipes, or bars, hence the word “ferro” or iron) with

ferrocement (the science of thin shell concrete) or concrete construction to have

the features better than other system.

MEGAWIDE CONSTRUCTION CORP.

Alufix Formworks (Alufix: Walls & Slabs)

Alufix is a hand-set formwork that covers walls and slabs in one and the same

system. It is lightweight, crane-independent and flexible for walls and slabs. The

frames are made of closed 3-chamber powder coated aluminium profile (double

groove) or 2-chamber aluminium profile (single groove).

JOSE CRIS BUILDERS

JC Wall Slab System

JC Wall slab system is a shear wall construction system composed of aluminium

forms with thickness of 13mm designed to shorten construction time. Based on

the test conducted, breaking load is 70,680N while the yield and tensile strength

is 244 and 268 Mpa, respectively.

Contact Person: Gilberto C. Rubio, Jr. Contact No.: 372-3201 / F# 372-3205 67 Scout Reyes St., Bgy. Paligsahan, Quezon City Validity Date: 01 February 2013 to 2018

Contact Person: Engr. Edgar Saavedra, President Contact No.: 655-1111 / 655-7958 / 655-9164 loc. 805 F# 655-0974 20 N. Domingo St., Bgy. Valencia, Quezon City 1112 Validity Date: 22 April 2013 to 22 April 2018

Contact Person: Mr. Austin Arcega, General Manager Contact No.: 426 -3905 / 426-3902 71 Timog Ave., Quezon City Validity Date: July 2014 to July 2017

14

Amsteel Structure Tunnel Form

Use of Beam Walls & Structural slabs, in cast-in-place walls & slabs. That will be

time efficient and can deliver quality structures.

PANELFLEX INC.

Panelflex Building System

Panelflex Building System is a tongue and groove wall panel system which aims

to replace the CHB walls. The panel uses MgO and Mgcl2 as raw materials,

alkali glass fiber to enhance the strength and high quality composite filling

materials to enhance combustible quality. It is absolutely free of asbestos,

formaldehyde, benzene and other harmful susbstances. The panel is lighweight

but has high strength, shock resistant, non-decay, non-toxic and odorless.,

environmetally friendly. Panelflex Mgo Panel has variuos design and colors and

is widely used for interior and exterior wall finishes.

FORMING ACCESS & SUPPORT, INC.

Aluma Easy Set Housing and Building System

Aluma Easy Set Housing and Building System is an Aluminum Panel Form with

all accessories that is manually installed & stripped for the next use. It has

special features that make it strongest panel in the market. It has features that

make it fast to install & strip for next. The system is versatile for use for

formworks for gang wall / columns forms, for shuttering, for table forms &

complete with accessories to use 18mm plywood for fillers. The methodology of

construction is shearwall & slab (with or w/out ream) poured monolithically of

ready mix concrete on external wall with windows & other openings, partition wall

with doorway staircase & slab in 1 time work sequence.

Contact Person: Ms. Bernadette Lomotan, President

Contact No.: 0917-5220168

2nd

Floor YDG Bldg., No. 219 Katipunan Avenue

Bgy. Milagrosa, Proj. 4, Quezon City

Validity Date: 26 November 2014 to 2015

Contact Person: Mr. Frederick J. Erum, President

Contact No.: T# 748-0424 / F# 748-0805 / M# 0917-8966445

227 GP Eastbank Road, Kapitbahayan, Bgy. Sta. Lucia

Manggahan Floodway, Pasig City

Validity Date: 30 April 2014 to 30 April 2017

Validity Date: 30 April 2014 to 30 April 2017

15

BEC SPECIALISTS PHILIPPINES, INC.

Safe and Modular Housing Technology (SAM HT)

It is a machine forming technology that enables manufacturing like applications to

the construction industry. US patented technology is used tro form seismically

and typhoon-resistant reinforced concrete homes quickly and efficiently.

VIKING CONSTRUCTION AND SUPPLIES

Viking Lightweight Concrete

The new technology is very versatile controllable lightweight foam concrete. It has excellent workability, thermal and sound insulation properties, it is moisture and fire resistant, it can be produced easily with precise specification of strength and densities. It can also be finished with all traditional finishes; can be planed, nailed, drilled or sawn. The new construction technology have a systemized way of casting lightweight concrete houses which are stronger, better and very much economical than any current methods.

ERGO KOTO PHILIPPINES, INC.

ERGO KOTO Integrated Building System

Ergo Koto Integrated Building System is a comprehensive set of modular housing

components comprising a proprietary foundation, wall panels, flooring and roof

panels with accessories allowing construction to 5 floors much faster than

conventional construction at a cost which is marginally lower than conventional

construction.

Contact Person: Mr. Patrick Oliver Gabriel Contact No. : M# 0915-3037117 Email add: pfgabriel@yahoo.com 12/F Robinson’s Summit Center, 6783 Ayala Avenue, Makati City Validity Date: July 2014 to July 2017

Contact Person: Mr. Jose Elmer Punzalan, Proj. Supervisor Contact No.: 705-1982 / M# 0906-4764201 Unit 102 City Tower Condominium, #810 Aurora Boulevard, Bgy. Kaunlaran C, Quezon City (Branch Office) Validity Date: 16 June 2015 to 16 June 2016

Contact Person: Mr. Hans Bohlmann Contact No.: 09175135006 2634 Rockefeller St., Brgy. San Isidro, Makati City Validity Date: 09 October 2015 to 09 October 2016

16

2. One to Two Storey Building

CAVITE FORM MODULE

Form Blocks

A patented precast concrete technology, load bearing that has high compression

strength. It is composed of double panels ingeniously connected parallel to each

other by 8mm steel dowels. They serve as concreting forms thereby eliminating

the cost of formworks.

POSHOME GLOBAL CORPORATION

Steel System

The process of building Lightweight Steel Framing houses is relatively the same

from that of the wood framed construction. Walls, floors and ceilings are built on

repeated process where typical wood framed truss assmblies directly over steel

frrame walls and floors. The studs and joist sections have flanges stiffened with a

lip to increase the strength of framing members.

PROPERTY COMPANY OF FRIENDS

Tilt-up Panel System

Precast Tilt-Up construction System is a technology wherein wall panels are

fabricated in the manufacturing plant where the concrete is poured on top of each

panel using pre-defined steel side forms that suits the final form and shape of the

building. The foundation is constructed using conventional method including the

zocallo walls, which supported the precast panel.

Contact person: Ms. Marissa del Mar Contact No.: 986-9220 / Fax No.: 889-1172 Production Plant: Bgy. Pulo, Lot 4C, Cabuyao, Laguna Admin: Anna Bldg., Bayani Rd., Fort Bonifacio, Taguig City Validity Date: 21 March 2011 to 21 March 2016

Contact Person: Ms. Jocelyn Guzman - President Contact No.: 727-7000 / 725-7945 / F# 727-2686 55 Tinio Street, Bgy. Addition Hills, Mandaluyong City Validity Date: 21 March 2011 to 21 March 2016

Contact Person: Mr. Jaime Mendoza Contact No. (02) 473-8978 / (046) 875-1371 0918-9256281 / 0920-9460551 3626 de Quiroz Compound, Buhay na Tubig, Imus, Cavite Validity Date: 29 November 2011 to 29 November 2016

17

VASQUEZ BUILDING SYSTEM CORPORATION

Vasquez Building System

The Vazquez Building System is a Filipino invention which is affordable & ideal

for mass housing projects. The technology consists of pre-fabricated columns,

beams & wall panels, designed for one or two-storey building footing. Columns

are erected on conventional footing and the beams are welded at second floor

between the columns to carry the 2nd floor slab and panels.

STERLING CONSTRUCTION AND DEVELOPMENT CORPORATION

Plaswall

Plaswall is a permanent formwork comprising a spacer and fiber cement boards

that serve as the finished wall surface. No plastering is needed when filled with

concrete where a monolithic structural bearing and shear wall is formed. It is

faster than any conventional masonry construction and eliminates time

consuming practices. Plaswall provides considerable savings in construction time

thus reducing labor cost. The system can meet all design requirements. If

needed, additional load capacity can be obtained by providing additional

reinforcing bars and/or increasing the grade of the concrete as per discretion of

the Structural Engineer.

NEDSTEEL CONSTRUCTION AND DEVELOPMENT CORPORATION

Light Gauge Steel Framing System

Light Gauge Steel (LGS) Framing System is an innovative approach for building

mass housing units. LGS Frames are fabricated out of lighweight high tensile

steel coils. It is consistent material because it does not wave, split, sprinter, or

Contact Person: Ms. Lilibeth Legasto Contact No.: 363-4545 / 411-5400 / Fax No.: 361-4611 1269 EDSA, Balintawak, Quezon City Validity Date: 20 July 2012 to 20 July 2017

Contact Person: Arch. Oliver Olarte Contact No.: 889-0934 / 844-7160 Lot 8 Block 13, Goldenville Business Park, Carmona, Cavite Validity Date: 01 February 2013 to 01 February 2018

18

burn. It’s cost effective and environment friendly because it is from 66% recycled

steel. It is lighweight yet durable.

REALM HOMEBUILDERS

Permaforms

Permaforms is a system that has a main component of double panel boards

(Fiber Cement Board) and is adhesively separated by an adaptor that are glued

at its inner surface. The adaptor is glued at pattern that would allow the flow of

concrete inside the panel. This is in replacement or a better alternative than a

conventional concrete hollow block wall or masonry wall. Concrete in-fill &

reinforcement (by others) may vary depending on the design requirements by

structural.

LIVE IN QUARTERS STEEL CORPORATION

Lighweight Structural Framing System

Lightweight Steel Structural System is sheet steel that is framed into shapes and

sizes such as 2 x 4, 2 x 8 and so forth. Steel framing members are framed in a

process called roll forming by passing sheet steel through a series of rollers to

form the bends that make the shape, e.g. the web, flanges and lips of a stud or

C-shape because this process is done with heat (also called “cold framing”). The

studs and joists are made stronger than the original sheet steel.

Contact Person: Mr. R. Donald D. Lirio, Jr. - President Contact No.: 466-3525 Telefax No: 738-3046 88 Shaw Boulevard, Oranbo, Pasig City Validity Date: 01 December 2013 to 01 December 2018

Contact Person: Mr. Joseph James Andaya, Managing Dir. Contact No.: 809-6510 to 12 M# 0917-8880468 605 Richville Tower, Alabang Zapote, Madrigal Bus. Park, Muntinlupa City Validity Date: 30 April 2014 to 30 April 2019

Contact Person: Ms. Rose Joan Aquino, President Contact No.: 470-7447 M# 0932-8606256 / 0926-6469539 611 Boni Avenue, Bgy. Plainview, Mandaluyong City Validity Date: 08 January 2014 to 08 January 2017

19

PRISMODIAL CONSTRUCTION CORP.

ASSOCIATES: CNYD TRV (CHINA) AND JGP MODULAR SYSTEMS

Structural Insulated Panel

An innovative housing concept utilizing Structural Insulation Panel (3) TRV

System wallboard, floor and roofing pre-fabricated components making the

construction process fast and easy. Salient features of the technology are

Typhoon resilient, fire, wind and earthquake resistant.

BLUE STAR CONSTRUCTION & DEVELOPMENT CORP.

Pueblocillo Building System (PBS)

PBS is an innovative technology combining maximum use of readily available

local materials and inherent Filipino craftsmaship with thoughtful design and

modern assembly line techniques.

DAZZLING LITE ENTERPRISES

Disaster Resilient Dome House

The Monolithic Dome provides what Federal Emergency Management Agency (FEMA) of USA calls "near absolute protection". They are also fire-resistant, rot-proof and termite-proof. That unbeatable strength comes from the concrete and steel used in the dome's construction and from its round shape. Monolithic Dome is the most disaster resistant building that can be built at a reasonable price. A wind 250 MPH (used by FEMA 361) pushes with a pressure of 300 pounds per square foot. If the wind speed increases to 300 miles per hour, the pressure increases to 404 pounds per square foot (psf). Wind speed of 300 MPH is considered maximum for a tornado. A force of 5 tornado pushes with 4 times the

Contact Person: Engr. Rolando Ramon Adea Contact No.: M # 0916-4814866 / 0932-7240261 297 Santo Rosario St., Plainview, Mandaluyong City Validity Date: 08 July 2014 to 08 July 2017

Contact Person: Atty. Lamberto T. Tagayuna, President Mr. Carlim V. Amandy, Contracts Officer Contact No.: 413-6857 Garden Cottages, Bgy. Cuyambay, Tanay Rizal Validity Date: 29 November 2011 to 29 November 2016

20

pressure of a force of a hurricane. No normal building can withstand such pressure.

SKS CONSTRUCTION AND DEVELOPMENT CORPORATION

SKS Structural Steel Framing System

SKS Structural Steel Framing System is a unique framing made by feeding high tensile steel galvanized or zincalume coil to our machine which then forms the said steel framing profile. SKS Steel Framing is perfect for mass housing as its frames are pre-cut, pre-holed and pre-punched, making it not only cost-effective and builder efficient, but also structurally sound. Frames are screwed and riveted together, interlocked and erected together based on designs of a structural engineer.

NEW ERA METAL FORMING INDUSTRIES

THOR Modular Housing

The Modular Housing is a mass housing design constructed through an

innovative system prefabricated durable metal forms. This is a system that can

produce more houses in short period of time which is enabled by measurable

system.

Contact Person: Mr. Stewart Kevin Plibundo, Manager Contact Nos. : 731-0011 / 731-0022 / F# 740-5416 0917-8375410 Email add: skp@sks.com.ph 4 Apo Street, Quezon City Validity Date: 16 June 2015 to 16 June 2016

Contact Person:Ms. Jenelyn O. Yuson, General Manager Contact No.: 373-4817 / M# 0925-8839385 Email address: dazzlinglite.enterprises@gmail.com bonachoncom3669@gmail.com 135-E Kamias Road, Anonas Avenue, Sikatuna Village, Quezon City Validity Date: 16 June 2015 to 16 June 2016

Contact Person: Mr. Hector Layco, CEO, M#0917-7152980 Mr. Joseph Aguilar, M# 0922-8649444 PR Compound, City Heights, General Santos City

Validity Date: 16 June 2015 to 16 June 2016

21

ROBSON STEEL CONCEPTS INC.

RSC IFrame Homes

IFrame Homes is an innovation in construction technology that utilizes light steel frames to build homes three times faster at almost half the cost through advances in production, computerization and new building materials. The construction system revolutionizes building method by addressing key points in construction like logistics, labor costs, material waste implementation time and delivery without sacrificing durability and quality. It combines the best aspects of light-gauge steel framing construction with new building available and materials for undoubtedly better construction results, an ideal solution to the ever increasing housing demands.

NEW ERA METAL FORMING INDUSTRIES

Makabayan Modular Housing

Makabayan Modular Housing is a single detached quick build mass housing solution designed to withstand common weather conditions occurring in the country. Low cost yet decent housing with fast pace construction.

MODULARIS INGENIARE INC. Pre-cast Concrete Box System Modular Houses

Modularis Ingenaire's on-site precast concrete construction system delivers fast, inexpensive and superior modular housing solutions. It is ten times faster than regular construction, structurally stable and conforms to National Building Standards.

Contact Person: Ar. Daniel Christpoher Pastor Mr. Adrian Ong, Manager Contact Nos. : 363-4403 M# 0916-6626807 Email address: daniel.pastor@yahoo.com B-4 L-14 Muralla Industrial Park, Meycauayan, Bulacan Validity Date: 16 June 2015 to 16 June 2016

Contact Person: Mr. Hector Layco, CEO, M#0917-7152980 Mr. Joseph Aguilar, M# 0922-8649444 PR Compound, City Heights, General Santos City

Validity Date: 08 September 2015 to 08 September 2016

Contact Person: Mr. Alvin Cabatit, President Arch. Richard Agbulos, VP for Design Contact No.: M# 09175286650 1152 Seneca Plaza Suite 302, E. Rodriguez Sr. Avenue Quezon City Validity Date: 08 September 2015 to 08 September 2016

22

RFN CONSTRUCTION AND DEVELOPMENT CORP.

Versa Tech

Versa Tech is a homogenous panel system that is adapted to the unique demands and requirements of mass or volume without compromising supply and quality of the end product. Versa Tech has done this through the introduction of the Versa Clip module.

8990 CEBU HOUSING DEVELOPMENT CORP.

Deca Homes Precast Technology for Housing

In the early 90’s the method of construction of the housing units developed by the 8990 Group was by traditional or CHB piling wherein all walls are non-loadbearing and main structures were reinforced footings, columns and beams. The duration for house construction was between 45 to 60 days. In the late 90s the company developed its Cast-in-Place technology and shortened the construction period to 25 days. In 2003, the company started to invest in the development of its own precast technology that was perfected after one year. The Deca Homes Precast Technology can finish a house in 8 days for the townhouse model, 7 days for the single attached model, 18 days for the single attached loft type model and 30 days for the 80-unit walk up condominium units. All walls are made of reinforced concrete with a design of 3000 to 4000psi concrete strength. This enables the company to provide decent shelter with affordable prices to the Filipino community.

Contact Person: Mr. Raffy Ilagan, Chairman Mr. Noel J. Arnaez, R and D Consultant Contact No: M# 09175555222 Rm. 210, Tia Maria Bldg., CV Starr Avenue Pamplona, Las Piñas City Validity Date: 08 September 2015 to 08 September 2016

Contact Person: Mr. Alex Ace Sotto, GM-Const./Eng’g Engr. Marsha Bonifacio Contact No.: T# (032) 412-5194 / M# 0999-9902705 Negros Street, Cebu Business Park, Cebu City Validity Date: 09 October 2015 to 09 October 2018

23

3. High Rise Building

MEGAWIDE CONSTRUCTION CORP.

Mammut Formworks

Mammut System has redefined standards in wall formworks consisting of

versatile panels with complete accessories. It is crane dependent and its frames

are made of closed steel profiles wih special coating. It has an all-around grooves

and assembly lock that guarantees a stepless, tight and perfectly aligned panel

connection. It is ideal for every high and large structure with concrete load

capacity of up to 100kn/m2. It brings a superior concrete finish with it all plastic

100% wood free facing and the symmetrical tie holes and joint pattern.

PHINMA PROPERTY HOLDING CORPORATION

Tunnel Form Building System

The technology utilizing Otinord Tunnel Form Works to Cast walls and slabs of

concrete structure in single operation which permits the realization of durable

monolithic structure that will satisfy the construction codes of countries situated in

seismic zones such as the Philippines.

PALIGID DEVELOPMENT CORPORATION

Eco-Key System (for 22 sq.m. and 26 sq.m. Housing)

The board can be used for external and internal walls. Main ingredient: Calcium silica. Fire rating: A-level. Available size: 1220mm x 2440mm; Density: 0.90 t/m3

Contact Person: Engr. Edgar Saavedra, President Contact No.: 655-1111 / 655-7958 / 655-9164 loc. 805 Fax No: 655-0974 20 N. Domingo Street, Bgy. Valencia, Quezon City 1112 Validity Date: 22 April 2013 to 22 April 2018

Contact Person: Engr. George Richard F. Siton Contact No.: (02) 533-7777 loc. 705 / F# 535-3462 PHINMA Properties Center No. 29 EDSA, Mandaluyong City Validity Date: 08 September 2015 to 08 September 2018

24

– 1.40 t/m3; Features: 100% Asbestos free, lightweight, moisture-resistant. Easy to work, fix and decorate.

4. Wall Panel

MCM ECO MANAGEMENT CORP.

MC Ecolyt Precast

MC ECOLYT PRECAST is made of cement, lightweight materials with special

additives combined with waste plastic materials specifically (PET) plastic bottles.

PET plastic can be used as fiber and replacement of conventional aggregates

that will improve the Engineering properties of concrete such as its compression

strength. It is lightweight and it will dramatically decrease the building weight.

SRC INT’L PANEL SYSTEM, INC.

SRC Panel

The Panel System is a wire space frame constructed similar to a truss, with a

39mm thick expanded polystyrene (EPS) core. The faces of the three-

dimensional wire frame are wires with welded intersection spaced 50mm apart in

both directions. The wire fabrics are held 75mm apart by 2.3mm diameter

spreader wires pierced diagonally through the foam core and welded 50mm apart

on every longitudinal wire on both the wire fabrics in a staggered arrangement.

Contact Person: Ms. Maricris Constantino Contact No.: (044) 761-0212 / 0923-2706220 41 Sampaloc, San Rafael, Bulacan Validity Date: 21 March 2011 to 21 March 2016

Contact Person: Ms. Myrna Montaos Contact No.: 939-5893/983-8106 to 08 / Fax No.:983-7778 Victoria Wave, Special Economic Zone, Bgy. 186, North Caloocan City Validity Date: 21 March 2011 to 21 March 2016

Contact Person: Mr. Kelvin Che, Director Ms. Lenie Heaven Penaflorida Contact No.: 833-0715 / M# 0936-8327363 210 A. Orbit Street, Bel-Air Village Phase 2, Makati City Validity Date: 09 October 2015 to 09 October 2018

25

PHILIPPINE ECOPANEL INC.

Ecopanel

Ecopanel is a lightweight hollow core concrete wall panel, load bearing panel

composed of cement and fine aggregates and reinforced with coconut coir. The

panels could be used as exterior and interior walls in low cost, middle and high

end home. The panels interlock by means of tongue and groove which allows

aligning of panels forming integral wall.

JBC INNOTECH CORPORATION

JBC Wall Panel

JBC Wall Panel is a permanent wall formworks system for external, internal or

partition walls composed of fiber cement board with EPS studs. The fiber cement

board is made up of hydral silicate, crystalline silica (quartz), cellulose fiber and

water steamed and cured in an autoclave at elevated temperature and pressure.

UNION GALVASTEEL CORPORATION

Duratherm Panel and Duratherm Roofing

Duratherm Panels are polyurethane sandwiched by galvanized steel. It is used for variety of applications, either for roofing, ceiling and walling. It provides very good insulation because of the rigid polyurethane foam which is a very good thermal insulator. Polyurethane foams are made up of tiny closed cells which contain gases that prevent transfer of heat and prevents moisture or air penetration. The average thickness of base metal for its skin panel is 0.45mm and the average thickness of top paint coating is 16.6 microns. Hence, the building stays cool thereby saving energy.

Contact Person: Mr. Cesar Alejandro Contact No.: 854-5711 / 853-2590 3

rd flr. Aseana Power Station, Aseana Business Park,

Macapagal Boulevard, Parañaque City Validity Date: 21 March 2011 to 21 March 2016

Contact Person: Mr. Jun Cabrera Contact No.: TF#659-0721/M#0919-5831335/0922-9019220 Unit 408, Antonio Center, Prime Street, Madrigal Business Park II, Alabang, Muntinlupa City Validity Date: 12 July 2012 to 12 July 2017

26

UGC’s Polyurethane Sandwich Panel Duratherm Roofing

Light Metal Frames

Light Metal Framing systems can be used on ceiling framing and dry wall

partitions as it allows durability, flexibility and fast installation applicable in any

type of building construction.

FAST WALL SYSTEMS PHILIPPINES, INC.

Fast Wall Lightweight Concrete Panel

Fast wall panels are made of polystyrene beads mixed with cement and

admixtures sandwiched between two cement boards making it light but durable

and fast to install. It is best for both exterior and interior application for any kind of

building structure. Its weight is four times lighter than CHB but it is tough and

durable and the installation is faster. No special equipment is needed to install

and manpower requirement is lesser. The panels have smooth skin where no

plastering is needed and only the joint are to be treated. It is ready to paint and

no need to apply neutralizer. The panel joints are watertight, its surface are water

repellent. With the presence of polystyrene beads, good sound and thermal

insulation can be achieved.

Contact Person: Mr. Efren M. Delid Contact No.: 520-8830 to 32 loc. 104 Chipeco Ave. Ext., Bgy. Real, Calamba City, Laguna

Contact Person: Hak Choon Kim Contact No.: 656-0268 / 655-7955 / F#: 656-35526 302 Ortigas Avenue Extension, Bgy. Sto. Domingo, Cainta, Rizal Validity Date: 01 February 2013 to 01 February 2018

Validity Date: July 2014 to 2017

Validity Date: 01 February 2013 to 2018

27

EVOVENTUR INC.

Evo Besta Board & Evo Autoclaved Lightweight Concrete (ALC) Panel

EVO Wall System, which maybe composed of EVO Besta Board with Autoclaved

Lighweight Concrete (ALC) as the infill materials, are established building

materials which are durable, sustainable amd multipurpose, and had been tried

and tested in different construction scenarios from all over the world. The EVO

Besta Board is a minerall based modern green building material that is versatile

and outperforms traditional products such as wood boards, gypsum, and cement

based products. It can be used as exterior and cladding and sheathing,

decorative board and fencing. It comes in various thickness with recessed edges

profile.

MACRO INDUSTRIAL PACKAGING PRODUCTS CORPORATION

Macro Air Sabs

Macro Air Sabs (MAS) is a composite building system that utilize Expanded

Polystyrene (EPS) as its core material for all structural members, walls, roof, floor

that is sprayed with composite coating made of precise blend of sand, cement,

glass fiber and other additives that together, create a structural wall system, slab,

roof and other parts of the building.

ARTY WORKS BUILDERS CORPORATION

Arty Light Energy Saving Wall

Arty Light and Energy Saving composite wall material is one of a kind composite

panel which uses thin fiber cement or calcium silicate board as panels. The

middle is filled with an expanded shale high strength, lightweight composite core

material to form a non-load bearing inorganic composite sheet. The product has

Contact Person: Mr. Jaime Albert Santos Contact No.: 681-5393 16A Major Dizon St., IVC Marikina Validity Date: July 2014 to July 2017

Contact Person: Ms. Virginia Lumanog, SVP Mr. Ariel N. Santos, VP Manufacturing Contact No.: 844-8994 to 95/ M#0917-7109988/0927-9125760 Airstrip Road, Canlubang Industrial Estate, Calamba City Laguna Validity Date: 30 April 2014 to 30 April 2017

28

these characteristics; solid, light weight, thin bodied, high strength capacity and

impact resistance, hanging strength heat insulation, sound insulation, fire-proof,

waterproof easy cut.

GLOBAL GREEN HOUSING ASIA PHILIPPINES, INC.

KOTO Integrated Building System

KOTO Integrated Building System comprises light weight panels which provide

permanent formwork to reinforced concrete for column and beam construction of

buildings. These light weight forms are used in a variety of ways from foundation,

to flooring, walling and roofing. The system complies with the requirements of the

Unified Building Code. Applied to socialized and economic housing it can

produce finished homes in a fraction of the time taken by conventional means.

TMPC CENTRAL CONST. & DEVELOPMENT TECHNOLOGIES

Philkor Panel

Philkor is a housing panel which can be used as partitions sidings, ceilings,

roofing materials, walls, etc. and concrete hollow blocks. The panel has the

following special characteristics and features: 1) excellent thermal insulation 2)

Junction type independent structure with excellent durability 3) have variety of

colors and available patterns 4) Standard production.

Contact Person: Mr. Antonio Sy Chua, President Ms. Jane Maxillum Contact No.: 733-7767 or 69 / 239-1691 / M#0906-5584562 Unit III Doña Anita Bldg, E. Rodriguez Avenue, Quezon City Validity Date: 08 September 2015 to 08 September 2018

Contact Person: Mr. Joseph Alexander Uy Contact No.: M# 0917-5900965 222 Ayala Tower 1, Ayala Ave., Makati City Validity Date: July 2014 to July 2017

Contact Person: Atty. Nelson Clemente Contact No.: M# 0917-5344541 10 Nery St., Remmanville Executive Village, Parañaque City Validity Date: July 2014 to July 2017

29

VERLIN KONSTRUKT INC.

Maxiwall System

The Maxiwall System is an innovative building system composed of 4.5mm thick

ficemboard with 2” x 3” metal furring and concrete fillers in between the wall with

reinforcement of 10mm making the structure more durable and stable in

replacement to the conventional CHB. In using the Maxiwall system, the week-

long plastering will be eliminated but with the same quality of work thereby

reducing the construction period of housing units. The concrete fillers between

the boards improve the stability and strength of the said partition.

NEXT CENTURY BUILDING SYSTEMS

Emmedue Panel

Polystyrene Panels Sandwiched by 2.75mm G.I wire mesh and 3mm cross connecting wires. Used for internal and external wall partitions with load bearing properties and others such as acoustic and heat insulation, fire retardant, seismic resistant and rust free metals.

JEA STEEL INDUSTRIES, INC.

JEA Light Steel Frames

JEA – Light Steel Frames are the different products of JEA Steel Industries, Inc. which are used as alternative materials for construction. The different products are JEA Span 45 Hat-Type Purlin, JEA Span C-Purlin, JHAMBA and Light Steel Frames for ceiling and partition, CMT-Tee Runners and J-Type runner. Said products are made-up of light gauge materials which are fast and simple to install, lightweight, termite proof, fire resistant and environmental friendly.

Contact Person: Engr. Ana-Lyn Tape, Proj. Manager Contact No.: T# 721-2464 / 724-3316 M# 0922-8953281 9

th Floor Obispado De Cubao Bldg.,

#41 Lantana Street, Cubao, Q.C. Validity Date: 18 November 2014 to 2017

Contact Person: Mr. Herbert C. Pionilla Marketing & Business Dev't. Manager Contact No.: M# 0917-8818371 / F# 556-0200 1005 The Infinity Tower, 26th Street Bonifacio Global City, Taguig City Validity Date: November 26 2014 to 2015

Contact Person: Mr. Reynaldo A. Monzon, Pres./Gen. Man. Arch. Jasper Mortiga, Technical Manager Contact No. : T# 442-2681 to 90 / 932-7210 loc. 350 M# 0919-5989246 / 0925-5989246 Validity Date: 26 November 2014 to 26 November 2017

30

ESERVICES GLOBAL SOLUTIONS, INC.

Serbe Block

SERBE Block is developed to improve the construction system by reduction of cost, time of completion, manpower and providing high architectural quality and additional features as sound reduction, thermal reduction and fire rating, water proofing, ballistic fire penetration and sound engineering. All these revolve and rely on the hidden structural property of the toilet roll cardboard inner core. Bonding these toilet roll cores together creates strong resistance to compression loading.

CAVITE FORM MODULES INC.

JJM Wall Formtile

The JJM Wall Formtile is a new type of wall system that is very versatile in nature making possible various types of wall construction with relative ease, high quality finishes, speed in construction with less cost. Said walls system uses JJM’s versatile interlocking pre-cast concrete wall panels that are generally rectangular in shape with varying wall finishes ranging from plain, tiled, plank, colored, and many other decorative design.

Contact Person: Mr. Jaime Mendoza Contact No.: 473-8978/(046)875-1371/0918-9256281/ 0920-9460551 Email address: jjm_form@yahoo.com 3626 de Quiroz Compound, Buhay na Tubig, Imus City, Cavite Validity Date: 16 June 2015 to 16 June 2018

Contact Person: Arch. Eduardo P. Urcia, Inventor Mr. Edgardo V. Bansale, Chairman of the Board Contact No. : T#856-6225/808-8808 / M#0916-6296256 9F Jecoprime Bldg., 21

st Drive,

Bonifacio Global City, Taguig City Validity Date: 26 November 2014 to 26 November 2015

31

RUCS CONSULT AND CONSTRUCTION SERVICES

Ekopanely – CAF

The standard CAF panel measures 4 feet by 8 feet by 2-1/4 inches and weighs 130 lbs. Custom panel sizes are available ranging from one inch to three inches thick and three feet to twelve feet long. The product's workability is similar to wood as it can be sawn, drilled, routed, nailed, screwed and glued. Wall attachments such as shelf brackets, picture frames, mirrors and towel bars can be attached directly to the panel.

LEXUS INDUSTRIAL ENTERPRISE CORPORATION

PPS Building Technology

An advanced System for industrial building utilizing fabricated, post-tensioned

modular elements, this system has been in use since 1955 worldwide on mass

housing, multi-storey residential blocks projects and schools etc (2.5M square

meters of projects to date) the system is fast (5-7 days per floor); economical (20-

30% less materials used); cost effective (lighter structure more efficient

foundation design plus lower material consumption=lower cost); safe (designed

for Zone 4 seismic zones; Category 5 Super-typhoons of more than 24KMP wind.

Contact Person : Ms. Myrna M. Fleming, President Contact No.: T# (063)301-3501/M#0999-3530519/ 0916-7770657 Unit A6 9

thFlr, Francesca Tower, EDSA cor. Sct. Borromeo

South Triangle, Quezon City Validity Date: 08 September 2015 to 08 September 2016

Contact Person: Mr. Benjamin Y. Go, President/CEO Antonio S. Co, Director Contact No.: M# 09178866926 19 San Ignacio St., Bo. Kapitolyo, Pasig City Validity Date: 08 September 2015 to 08 September 2018

32

5. FLOOR AND ROOF DECK SYSTEM

JACKBILT INDUSTIRES, INC.

T-Joist Floor and Roof Deck System

T-Joist floor and roof deck slab consist of poured-in-place concrete slab and

precast prestressed inverted T-Beams called T-Joist. T-Joist is mass produced at

a controlled factory setting with the use of slipformer, cured and cut to client’s

specification. The system eliminates the use of forms which directly translates to

savings in time and money.

Ribbed Slab System (Flooring)

Ribbed slab system is a system consisting of precast, pre-stressed half slabs with concrete up strands (rib) that are purposely designed to provide the necessary stiffness to the slab for handling, act as spacers for mesh reinforcement and to provide a positive tie between the precast element and in situ concrete topping to ensure a composite action between both. Its smooth soffit or slab bottom eliminates the need for drop ceiling and is ready for painting.

UNION GALVASTEEL CORPORATION

Duradeck and Duraweb

Metal decking (Duradeck and Duraweb) floor structure allows durability and high strength, fast installation ideal for residential, commercial and industrial applications. The material is a continuous hot dipped galvanized steel.

Contact Person: Mr. Cayetano P. Filart Contact No.: 856-1922 / 846-2222 / 856-6598 21

st PET Plans tower Bldg., 444 EDSA,

Guadalupe Viejo, Makati City Validity Date: 29 November 2011 to 29 November 2016

Contact Person: Mr. Cayetano P. Filart Contact No.: 856-1922 / 846-2222 / 856-6598 21

st PET Plans tower Bldg., 444 EDSA,

Guadalupe Viejo, Makati City Validity Date: 18 November 2014 to 18 November 2017

33

Duradeck Duraweb

CONCRETE VENTURES GROUP INC.

Precast Prestressed Concrete C-Joist

C-Joist is a precast, prestressed concrete joist used as floor and roof slab

system. It is a concrete product with pre-tensioned tendons as its reinforcement.

Basically, a concrete joist supports a suspended flooring and form part as a slab

system. C-Joist was laid on top of the beams with a minimum of 4 inches seating

clearnce on concrete beams and at least 3 inches bearing capacity for the steel I-

beams. Reinforced Permanent Concrete Forms (PRF) was placed on top of the

C-Joist shoulder in between distances. Panel bars on beams are required on

shear connectors. It requires minimum of 2 inches concrete on top of C-Joist to a

maximum of 3 inches structural slab. It is an alternative method from

conventional wooden joist and helps to speed up construction.

STONEWORKS SPECIALIST INT’L CORP.

Fiberglass Reinforced Plastic (FRP) Roofing

Fiberglass Reinforced Plastic (FRP) is a composite of several materials mainly

fiberglass and resin, lay down in layers and hardened to form solid laminate. FRP

roofing will replace metal roofing with its advantages of greater transmission of

natural light which improves work conditions and reduce energy costs. It is also

corrosion-resistant that provides long term retention of aesthetic properties and

surface protection.

Contact Person: Efren M. Delid Contact No.: 520-8830 to 32 loc. 104 Chipeco Avenue Extension, Bgy. Real, Calamba City Laguna Validity Date: 01 February 2013 to 01 February 2018

Contact Person: Engr. Bong Cleto, Marketing Manager Contact No.: 723-4922 / 723-4923 36 1

st Ave., Cubao, Quezon City

Validity Date: 31 July 2013 to 31 July 2016

Contact Person: Mr. Jesus SJ. Felipe, President/COO Contact No.: (046) 402-2893 #8358 Dr. A. Santos Ave., Sucat, Parañaque City Validity Date: 31 July 2013 to 31 July 2016

34

ARCHITECKS METAL SYSTEMS

Concrete Floor Steel Decking

Architecks Metal Systems Inc. specializes in manufacturing and marketing of concrete floor decking. These are high tensile materials that provide strong reinforcements and permanent floor works for concrete slab to be used for residential, commercial and industrial structures. It saves manpower, materials, time and cost.

UNITED STEEL TECHNOLOGY INTERNATIONAL CORP.

Steeltech Pre-Painted G.I. Roofing

Steeltech products include colored roofing materials catering to residential and

industrial requirements. Imported raw materials and paints are used in producing

coils and tested vigorously comparable to international standards to assure high

quality products.

Steeltech Metal Decking

STEELTECH METAL DECKING is locally manufactured galvanized sheets integrated in formworks to speed up floor construction.

Contact Person: Mr. Juan T. Ng, President Claudette V. Enriquez, Mktg Dev't. Officer Contact No.: (02) 367-8335 / (02)351-7760

Unit 5A 5/F DN Corporate Center, Brgy. South Triangle 1388, Quezon City Validity Date: 08 September 2015 to 08 September 2018

Contact Person: Ms. Paula Dulalia, Marketing Manager Contact Nos. : T# 567-3668 to 79 / F#567-3503 / M# 0917-5813760 Email address: info@steeltech.com.ph 12th Floor BPI Binondo Rosario Bldg. 560 Quintin Paredes St., Binondo, Manila Validity Date: June 16 2015 to 2018

Validity Date: 09 October 2015 to 09 October 2018

35

JAN OWEN MARTIN INDUSTRIES, INC.

Guttapral Natural Color

Guttapral Natural Color is a multi layer bitumen corrugated roof sheet with color impregnation for final covering of roofs that are manufactured by first forming a load bearing frame that is subsequently vacuum-bituminized and coloured in order to provide a pleasant appearance to the roof.

OFIC PHILIPPINES

Onduline Roofing

Onduline is an attractive, lightweight but extremely tough corrugated roofing and

wall cladding material. Its proven weathering qualities coupled with the ease and

safety with which it can behandled and fixed have resulted in it being used

extensively on a wide range of buildings across the globe in all kinds of climatic

conditions.

Since its development over 50 years ago Onduline has benefitted from a

continuing process of development and now offered as a roofing system

complete with a comprehensive range of accessories able to deliver effective

solutions to many of your roofing needs.

Contact Person: Lorraine L. Corpuz, Bus.Dev't Exec. Contact No.: T# 952-0142 / F#866-1330 #84 M.L. Quezon St., Wawa, Quezon City Validity Date: 08 September 2015 to 08 September 2016

Contact Person: Roman Cristopher Alarcon Contact No.: TF# 570-7344 7V 7th Floor Cyber One Building, Eastwood Libis, Quezon City Validity Date: 09 October 2015 to 09 October 2016

36

6. SEPTIC

PHILKOR PALSTIC CORP. (formerly Kotec)

Three Chamber Plastic Septic Tank

The Kotec Three chamber Plastic Septic Tank is a septic tank made from

indigenous materials and recycled PE plastic forming a system like a bio reactor

where biological reaction takes place to breakdown waste into a simple form. The

system is arranged into a staged-wise configuration first through the anaerobic

digestive chamber then through the filtering chamber then finally through the

aerobic filtering chamber.

WEIDA SEPTIC TANK

Polyethylene Septic Tank

A pre-fabricated septic with digestive and culturing chamber which is

manufactured using rotational mould made of premium grade resins. It is

leakproof seamless unit, lightweight, strong, rugged and resistant to impact. It is

also chemical resistant and corrosion proof. Its filter media has large surface area

for optimal microorganism growth and clogged free optimized void tratio with

removable modular chamber.

STONEWORKS SPECIALIST INT’L CORP

Fiberglass Septic Tank

Fiberglass Septic Tank has Two chambers: the decomposing chamber

(anaerobic section), and the filtering strainer. The design and construction is

generally a cylindrical body (straight type) with a totally closed bottom portion

Contact Person: Mr. Leonardo M. Rodriguez, Sales and Marketing Director Contact No.: (044) 815-6135 to 36/TF# (044) 815-6134 / (046) 432-0026/ M#0917-8111105 / 0922-5361673 1GC Compound Loma de Gato, Marilao, Bulacan Validity Date: 21 March 2011 to 21 March 2016

Contact Person: Mr. Michael Sy Contact No.: 706-2002 / TF# 706-4966 3/F BT & T Center, #20 E. Rodriguez Jr. Avenue (C-5) Bgy. Bagumbayan, Quezon City Validity Date: 29 November 2011 to 29 November 2016

.

37

thus avoiding fowling and poisoning of the soil. The design includes a filtering

basket with a spacedly arranged apertures, located at the wall segregating the

digestion chamber and bacterial filtration. Charcoal and limestone gravel are

used as filtration media to filter the sludge from the digestion chamber.

YOONNI GREENTECH CORPORATION

Yoonni Septic Tank

Yoonni Septic Tank is recycled three chamber purifying septic tank made from

LDPE plastic. It is composed of a tank body having an associated cover mounted

on the top position. The cover has a vertically disposed vent while the tank has

an inlet and outlet post. The septic tank has a reinforcement consisting of lateral

and longitudinal plastic ribs making it durable and easy to install.

MIRAGA TRADE CENTER

Filchemtech Wastewater Treatment Plant

Non-biological wastewater treatment system / STP; no foul odour or toxic gases, no aeration tank needed, no enzymes or bacteria needed, small space required, easy to install technology.

Contact Person: Mr. Jesus SJ. Felipe, President/COO Ms. Marilyn Ong, General Manager Contact No.: (046) 402-2893 8358 Dr. A. Santos Ave., Sucat, Parañaque City Validity Date: 11 November 2013 to 11 November 2018

117 Champaca Street, UPS 4, Parañaque City

Contact Person: Mr. Soon Baek Seo, President Ms.Susana Lopez, Manager Contact No.: (044) 795-0807 M# 0922-8325596 Esguerra St. Longos, Pulilan, Bulacan Validity Date: 08 January 2014 to 08 January 2019

117 Champaca Street, UPS 4, Parañaque City

Contact Person : Mr. Buddy Catbagan, Manager Contact No. : 437-4127 / 438-2607 24 Tecson St. cor. Mascardo St. Bgy. Villa Maria Clara, Project 4, Quezon City Validity Date: 18 November 2014 to 18 November 2015

38

GREENWAY TOILET SOLUTIONS

Greenway Eco-Toilet System

Green Eco-toilet system will allow household to save 30 to 40 percent on its

water consumption instead of using fresh, potable water just to flush the toilet,

the system will allow the safe hygienic use of grey water or water already used

for hand washing and bathing for this purpose. Aside from reducing substantially

the household's water bill the system will significantly help our country in

preventing a water supply crisis.

7. PAINT

FIRST ASIAN BRIGHT STAR MARKETING CORP.

Contractor Grade Flat White Latex–AB 500 & Premium White Flat Latex

Eggshell Finish are USA manufactured household paint suitable for exterior and

interior. It is water based, non-flammable, non-toxic, odorless and lead-free. The

p[aints are quick drying with stain resistant formulated and mildew resistant

coating. Flat latex has a coverage of 28.37 sq.m. per gallon.

Contact Person: Mr. Antonio Umali, Jr. Contact No.: 823-3724 117 Champaca Street, UPS 4, Parañaque City Validity Date: 09 May 2012 to 09 May 2017

117 Champaca Street, UPS 4, Parañaque City

Contact Person: Mr. Daniel A. Camacho, Inventor Contact Nos.: T# 861-7321 M# 0918-9039921 Email add: dac888@gmail.com G/F Plaza Andrea Building, Holy Spirit Drive, Bgy. Holy Spirit, Quezon City Validity Date: 16 June 2015 to 16 June 2016

39

8. SOIL STABILIZER

ISA GREENPATH ENTERPRISES, INC.

Eco base 300 Soil Stabilizer

Eco base 300 Soil Stabilizer are liquid stabilizer designed to improve the

structure/integrity of road construction where soil becomes chemically bonded

making it harder and water resistant. The result is a road that exhibit high sheer

strength to improve soil bearing capacity that is weather-proof, easily workable

and can be compacted to a better particle cohesion by equipment and traffic.

9. FENCE

VAZQUEZ BUILDING SYSTEMS CORP.

Vazbilt Prefab Fences

Vazbilt Prefab Fences is a modular concrete fence system using interlocking wall

panels columns and tie beams designed with versatility that gives a warm,

aesthetic and clean appearance while providing strength and security well

beyond CHB. With finished texture on both sides, the tongue and groove system

has a quick, clean and efficient installation even during rainy days. Its assembly

is clean unlike messy hollow block laying and plastering.

10. WATER STORAGE TANK

WEIDA PHILIPPINES, INC.

Weida Polystor Water Storage Tank

The polyehylene (PE) upright storage tank is a premium quality tank produced

with the lates technology to meet a wide range of water storage requirement and

applications. It is manufactured from reputable international producers. it is

strong, seamless, leak proof and weather resistant. Polystor polyethylene tanks

Contact Person: Mr. G. John Reyes Contact No.: 736-6562/ TF#913-1260/ M#0915-8333049 20 Fordham Street, St. Ignatius Village, Quezon City Validity Date: 09 May 2012 to 09 May 2017

Contact Person: Ms. Lilibeth Legasto Contact No.: 363-4545/411-5400 / F#361-4611 1269 EDSA, Balintawak, Quezon City Validity Date: 01 February 2013 to 01 February 2018

40

are specially formulated with UV stabilizer for long term durability under direct

sunlight. It is lightweight for easy handling food and potable water compliant and

can store all kinds of water, including corrosive and mineralized water. It has an

extensive range which cater to both household as well as commercial, industrial

use.

11. WALL MATERIAL

JAMES HARDIE PHILIPPINES

Hardieflex Sheets, Hardieflex Senepa & Pro

HardieFlex Sheets is a smooth, flat sheet which comes in a natural gray color that can be set to create a seamless look. HardieFlex Senepa is a smooth fascia board which comes in a variety of widths and lengths. HardieFlex Pro is a premium sanded and sealed HardieFlex sheet with dimensions designed specifically for the average toilet and bath size in the Philippines, to ensure less jointing and wastage.

SCG SMART BOARD

SCG Smart Board

SCG Smart Board is a non-asbestos fiber cement board made of SCG Portland cement with silica, sand and cellulose fiber through autoclave process specially designed for various internal and external wall, ceiling and floor applications.

Contact Person: Mr. Michael Sy Contact No.: 706-2002 / TF# 706-4966 3/F BT&T Center, 20 E. Rodriguez Jr. Avenue (C-5) Bgy. Bagumbayan, Quezon City Validity Date: 31 July 2013 to 31 July 2016

Contact Person: Mr. Bobby Molina Contact No.: T#895-2994/ M#0918-8183958/ 0922-8783558 Email address: Bobby.Molina@jameshardie.com.ph Brgy. San Isidro, Cabuyao, Laguna Validity Date: 26 November 2014 to 26 November 2017

Contact Person: Heherson B. Bala, Marketing Exec. Contact nos.: T# 501-8630 to 8635 /621-3060 M# 0917-8176461 / 717-6900 Email address: hehersob@scg.co.th

Unit 903 9th Flr, Lot 3 Blk. 7, 3rd Ave. Cor. 31st Street Bonifacio Global City, Taguig City Validity Date: 16 June 2015 to 16 June 2018

41

THE THAI OLYMPIC FIBER-CEMENT COMPANY, LTD.

Fiber Cement Building Material

Fiber cement board composed of Portland cement, sand and cellulose fiber. Economic lifespan is 50 years.

AGI URBAN DEVELOPMENT CORPORATION

Compressed Agricultural Fiber (CAF) Building System

Rice or wheat straw is heated and compressed under pressure forming thermo set building panels which are all natural, safe, strong, sustainable, and can be constructed into low cost housing in mass quantity. The Stramit Building Components are non-toxic, mold and pest-resistant, energy efficient, highly sound absorbent and nearly fireproof.

CENTRAL LUMBER CORPORATION

GARDNER Fiber Cement

GARDNER fiber cement products are made with the latest German hatscheck

machine and technology. It is made from a combination of cellulose fiber, sand,

and premium quality Portland cement which are autoclaved to produce high

Contact Person: Mr. Isabelo Dingal, Sr. Mktg. Manager Contact No: T#224-2088/F#224-2077/M#0906-2103646 Email address: billi_d@SHERAsolution.com billi_dingal@yahoo.com Level 10-1 One Global Place, 25th St. & 5th Avenue Bonifacio Global City, Taguig City Validity Date: 16 June 2015 to 16 June 2018

Contact Person: Mr. Tim Kilpatrick, CEO Mr. Tim Evans, VP Sales & Marketing Contact Nos. T# 926-5050 4200 Lubbock Avenue. Ft. Worth, TX 76115 11/F Atlanta Center, 31 Annapolis Street, San Juan City Validity Date: 08 September 2015 to 08 September 2016

42

quality, durable fiber cement board, wood and PFC. As such Gardner products

are strong, does not shrink, and are impressively flexible. They are fire, water,

moisture, weather-, termite, insect and rot resistant; does not contain asbestos

and are environment friendly.

12. OTHERS

NIPPON TECH BUILDERS

Dramix high tensile steel fibers are made from prime quality high carbon steel wire. They insure a high tensile strength of at least 2000 N/mm2 and close tolerances. Concrete floors reinforced with Dramix steel fiber are both structure and a covering; this dual role means that every floor user must specify the performance he expects from floor. These characteristics are: Sufficient bearing capacity to support loads which vary greatly in degree and nature and distribution of these load to underlying ground; Flatness and level imposed by operating constraits; resistance to wear and dust creation; where necessary, resistance to chemical attack; In certain cases, waterproofing (areas of water retention); special aesthetic characteristics (pigmentation).

Contact Person: Mr. Ramon S. Fernandez Jr., GM Ms. Eillenny Asuncion Contact No.: T# 643-3897 / 641-8729 Validity Date: 08 September 2015 to 08 September 2016

Contact Person: Mr. Raymond Tuason, Proj. Team Area Manager Contact Nos. (MLA) 361-8933; 361-9560 / (CEBU) (032) 253-2622; 254-7248 Bldg. 3, Marcelo Compound, 67 Gov. Pascual Street, Malabon City Validity Date: 09 October 2015 to 09 October 2018