a history of - wainbee · 2011-09-23 · a history of quality, service and innovation now in its...

A history ofQuality, Service and Innovation

Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company’s headquarters is based in Matthews, North Carolina with manufacturing plants and foundries located in Pageland and Conway, South Carolina.

Conbraco has a history of new product development and innovation that dates back to the company’s inception in 1928. Today, the Conbraco line of products is marketed under the “Apollo Valves” brand and includes: ball valves, butterfly valves, backflow prevention devices, water pressure reducing valves, mixing valves, safety relief valves, water gauges, strainers, vacuum breakers, valve actuators and more.

In 2011 Conbraco introduced a new line of Made in USA bronze gate, globe and swing check valves in sizes 1/4” through 3” to complement our extensive offering of commercial, HVAC, irrigation, industrial and OEM products.

The Apollo International import cast iron flanged products in this catalog are offered to extend the scope of our multi-turn offering to 24”. These cast iron multi-turn valves have been manufactured to our exacting specifications, are 100% factory tested and are furnished with a two year warranty.

The Conbraco line continues to expand - with new products, designs and advanced materials - to better serve the needs of our customers in a variety of residential, commercial and industrial markets.

Conbraco Headquarters, Matthews, NC (above)Conbraco’s Primary Distibution Center, Pageland, SC (below)

Table of ContentsIron Gate ValvesIron Globe ValvesIron Swing Check ValvesIron Wafer ChecksDefinitions Comparison ChartTerms & ConditionsWarranty Information

....................................................... 4 ..................................................... 6

.......................................... 7 ..................................................... 8

.............................................................. 9 ...................................................12

.................................................15..............................................15

FEATURES:Compatible with ANSI 250# & 300# FlangesFull PortBronze Mounted Seat RingsSolid WedgeAdjustable Graphite Stem PackingNon-Rising StemFlanged ConnectionBolted BonnetRugged Iron Hand WheelBack Seat Protection

STANDARDS:MSS SP-70 “Gray Iron Gate Valves Flanged and Threaded”ASME B16.10 “Face-to-Face and End-to-End Dimensions of Valves”

PERFORMANCE RATING:Saturated Steam: 250 psi (17.2 Bar) to 406°F(207°C)Cold Working Pressure: 500 psi (34.5 Bar) at 100°FTemperature Range: -20°F to 406°F

MATERIALS:Body, Bonnet & Wedge: ASTM A126 CL-B, CIStem: ASTM B16Packing & Gasket: Graphoil

FEATURES:Compatible with ANSI 125# & 150# FlangesFull PortBronze Mounted Seat RingsSolid WedgeAdjustable Graphite Stem PackingNon-Rising StemBolted BonnetBack Seat Protection


PERFORMANCE RATING:Saturated Steam: 125 psi (8.6 Bar) to 353°F (178°C)(2”-12”) 100 psi (6.9 Bar) to 338°F (170°C) (14”-24”)Cold Working Pressure: 200 psi (13.8 Bar) at 100°F (2”-12”) 150 psi (10.3 Bar) at 100°F (14”-24”)Temperature Range: -20°F to 406°F


Customer Service (704) 841-60004www.apollovalves.com

IRON GATE VALVES

610F SERIES

620F SERIES

Part Number6GA-108-B16GA-109-B16GA-100-B16GA-10A-B16GA-10B-B16GA-10C-B16GA-10E-B16GA-10G-B16GA-10H-B16GA-10J-B16GA-10K-B16GA-10M-B16GA-10N-B16GA-10P-B1

Part Number6GA-208-B16GA-209-B16GA-200-B16GA-20A-B16GA-20B-B16GA-20C-B16GA-20E-B16GA-20G-B16GA-20H-B1

NPS2

2 1/234568

10121416182024

NPS2

2 1/234568

1012

Length7.007.508.009.00

10.0010.5011.5013.0014.0015.0016.0017.0018.0020.00

Length8.509.50

11.0012.0015.0016.0016.5018.0019.75

Height14.5716.3418.9020.6724.6128.7432.4837.4043.3137.0142.5246.4654.3357.48

Height11.2812.7213.3116.1819.8022.0025.5930.3133.90

Weight36.048.059.0

104.0150.0192.0260.0434.0606.0926.0

1098.01543.01638.02756.0

Weight42.055.066.0

115.0161.0205.0278.0456.0633.0

Class 125 FLANGED GATE VALVE


All dimensions are in inches and pounds.


FEATURES:Compatible with ANSI 250# & 300# FlangesFull PortBronze Mounted Seat RingsSolid WedgeAdjustable Graphite Stem PackingOutside Screw and YokeFlanged ConnectionBolted BonnetBack Seat Protection


PERFORMANCE RATING:Saturated Steam: 250 psi (17.2 Bar) to 406°F(207°C)Cold Working Pressure: 500 psi (34.5 Bar) at 100°FTemperature Range: -20°F to 406°F


FEATURES:Compatible with ANSI 125# & 150# FlangesFull PortBronze Mounted Seat RingsSolid WedgeAdjustable Graphite Stem PackingOutside Screw and YokeBolted BonnetBack Seat Protection


PERFORMANCE RATING:Saturated Steam: 125 psi (8.6 Bar) to 353°F (178°C) (2”-12”) 100 psi (6.9 Bar) to 338°F (170°C) (14”-24”)Cold Working Pressure: 200 psi (13.8 Bar) at 100°F (2”-12”) 150 psi (10.3 Bar) at 100°F (14”-24”)Temperature Range: -20°F to 406°F


5Customer Service (704) 841-6000for additional information, submittal sheets and manuals, visit www.apollovalves.com

IRON GATE VALVES

611F SERIES

621F SERIES

Part Number6GA-118-B16GA-119-B16GA-110-B16GA-11A-B16GA-11B-B16GA-11C-B16GA-11E-B16GA-11G-B16GA-11H-B16GA-11J-B16GA-11K-B16GA-11M-B16GA-11N-B16GA-11P-B1

Part Number6GA-218-B16GA-219-B16GA-210-B16GA-21A-B16GA-21B-B16GA-21C-B16GA-21E-B16GA-21G-B16GA-21H-B1

NPS2

2 1/234568

10121416182024

NPS2

2 1/234568

1012

Length7.007.508.009.00

10.0010.5011.5013.0014.0015.0016.0017.0018.0020.00

Length7.007.508.009.00

10.0010.5011.5013.0014.00

Height14.9616.9319.0924.2127.5632.8737.7648.0356.5065.1671.8579.5390.16

132.28

Height14.9616.9319.0924.2127.5632.8739.7648.0356.50

Weight38.051.062.0

110.0154.0203.0284.0459.0637.0966.0

1135.01753.02238.03197.0

Weight44.057.071.0

121.0165.0216.0302.0481.0642.0





FEATURES:Compatible with ANSI 250# & 300# FlangesFull PortBronze Mounted Seat RingsPositive Shut-OffThrottling CapabilitiesAdjustable Graphite Stem PackingOutside Screw and YokeFlanged ConnectionBolted BonnetRugged Iron Hand WheelBack Seat Protection

STANDARDS:MSS SP-85 “Gray Iron Globe & Angle Valves Flanged & Threaded Ends”ASME B16.10 “Face-to-Face and End-to-End Dimensions of Valves”

PERFORMANCE RATING:Saturated Steam: 250 psi (17.2 Bar) to 406°F (207°C) Cold Working Pressure: 500 psi (34.5 Bar) at 100° F Temperature Range: -20°F to 406°F


FEATURES:Compatible with ANSI 125# & 150# FlangesFull PortBronze Mounted Seat RingsPositive Shut-OffThrottling CapabilitiesAdjustable Graphite Stem PackingOutside Screw and YokeBolted BonnetBack Seat Protection

STANDARDS:MSS SP-85 “Gray Iron Globe & Angle Valves Flanged & Threaded Ends”ASME B16.10 “Face-to-Face and End-to-End Dimensions of Valves”

PERFORMANCE RATING:Saturated Steam: 125 psi (8.6 Bar) to 353°F (178°C)Cold Working Pressure: 200 psi (13.8 Bar) at 100° F Temperature Range: -20°F to 406°F



IRON GLOBE VALVES

711F SERIES

721F SERIES

Part Number6GB-218-B16GB-219-B16GB-210-B16GB-21A-B16GB-21B-B16GB-21C-B16GB-21E-B1

Part Number6GB-118-B16GB-119-B16GB-110-B16GB-11A-B16GB-11B-B16GB-11C-B16GB-11E-B16GB-11G-B1

NPS2

2 1/234568

NPS2

2 1/234568

10

Length10.5011.5012.5014.0015.7517.5021.00

Length8.008.509.50

11.5013.0014.0019.5024.50

Height14.1715.7516.9318.9020.8723.6227.56

Height11.6112.9914.3715.7517.7220.6723.4326.97

Weight40.852.970.599.2

136.7202.8332.9

Weight36.049.064.094.0

137.0195.0315.0485.0

Class 125 FLANGED GLOBE VALVE

Class 250 FLANGED GLOBE VALVE



FEATURES:Compatible with ANSI 125# & 150# FlangesFull PortMinimal Pressure DropBolted BonnetIntegral SeatLever and Weight Design

STANDARDS:MSS SP-71 “Gray Iron Swing Check Valves Flanged & Threaded”ASME B1.1 “Unified Inch Screw Threads”ASME B16.10 “Face-to-Face and End-to-End Dimensions of Valves”

PERFORMANCE RATING:Saturated Steam: 125 psi (8.6 Bar) to 353°F Cold Working Pressure: 200 psi (13.8 Bar) at 100°FTemperature Range: -20°F to 406°F

MATERIALS:Body, Cover & Disc: ASTM A126 CL-B, CISeat & Disc Ring: ASTM B62 Bronze (2”-6”) ASTM A126 CL-B, (8”-12”)Packing & Gasket: Graphoil


IRON SWING CHECKS

910F SERIES

910FLW SERIES

Part Number6SC-108-B16SC-109-B16SC-100-B16SC-10A-B16SC-10B-B16SC-10C-B16SC-10E-016SC-10G-016SC-10H-016SC-10J-016SC-10K-016SC-10M-016SC-10N-01

Part Number6SC-108-B1L6SC-109-B1L6SC-100-B1L6SC-10A-B1L6SC-10B-B1L6SC-10C-B1L6SC-10E-01L6SC-10G-01L6SC-10H-01L

NPS2

2 1/234568

101214161820

NPS2

2 1/234568

1012

Length8.008.509.50

11.5013.0014.0019.5024.5027.5031.0036.0036.0040.00

Length8.008.509.50

11.5013.0014.0019.5024.5027.50

Height4.415.245.676.617.808.54

10.2811.3012.5617.5023.4527.5029.25

Height4.415.245.676.617.808.54

10.2811.3012.56

Weight26.039.047.082.0

124.0160.0271.0437.0644.0950.0

1160.01720.02094.0

Weight38.845.261.799.2

132.3169.8282.2438.7672.4

Class 125 FLANGED SWING CHECK

Class 125 FLANGED SWING CHECK



FEATURES:Compatible with ANSI 125# & 150# FlangesFull PortMinimal Pressure DropBolted BonnetIntegral Bronze Seat

STANDARDS:MSS SP-71 “Gray Iron Swing Check Valves Flanged and Threaded”ASME B16.10 “Face-to-Face and End-to-End Dimensions of Valves”

PERFORMANCE RATING:Saturated Steam: 125 psi (8.6 Bar) to 353°F (178°C) (2”-12”)100 psi (6.9 Bar) to 338°F(170°C) (14”-20”)Cold Working Pressure: 200 psi (13.8 Bar) at 100°F (2”-12”) 150 psi (10.3 Bar) at100°F (14”-20”)Temperature Range: -20°F to 406°F

MATERIALS:Body, Cover & Disc: ASTM A126 CL-B, CISeat & Disc Ring: ASTM B62 Bronze (2”-6”) ASTM A126 CL-B, (8”-20”)Gasket: Graphoil


IRON SWING CHECKS & WAFER CHECKS

920F SERIES

910WB SERIES

Part Number6SC-208-B16SC-209-B16SC-200-B16SC-20A-B16SC-20B-B16SC-20C-B16SC-20E-01

NPS2

2 1/234568

Length10.5111.5012.5014.0015.7517.5021.00

Height4.415.245.676.617.808.54

10.28

Weight30.044.055.090.0

135.0172.0289.0

Class 250 FLANGED SWING CHECKAll dimensions are in inches and pounds.


Part Number6WC-108-N16WC-109-N16WC-100-N16WC-10A-N16WC-10B-N16WC-10C-N16WC-10E-N16WC-10G-N16WC-10H-N16WC-10J-N16WC-10K-N16WC-10M-N16WC-10N-N16WC-10P-N1

NPS2

2 1/234568

10121416182024

Length2.212.382.622.623.253.755.005.507.127.257.508.008.388.75

Dia.4.004.755.256.757.508.50

11.0013.2516.0017.7520.0021.5023.7528.00

Weight3.06.09.0

13.017.025.047.067.0

118.0132.0184.0223.0333.0474.0

Class 125 WAFER CHECK

FEATURES:Compatible with ANSI 250# & 300# FlangesFull PortMinimal Pressure DropBolted BonnetIntegral Seat

STANDARDS:MSS SP-70 “Gray Iron Swing Check Valves Flanged and Threaded”ASME B1.1 “Unified Inch Screw Threads”ASME B16.10 “Face-to-Face and End-to-End Dimensions of Valves”

PERFORMANCE RATING:Saturated Steam: 250 psi (17.2 Bar) to 406°F Cold Working Pressure: 500 psi (34.5 Bar) at 100°FTemperature Range: -20°F to 406°F

MATERIALS:Body, Cover & Disc: ASTM A126 CL-B, CISeat & Disc Ring: ASTM B62 (2”-6”) & ASTM A126 CL-B, CI (8”)Gasket: Graphoil

FEATURES:Compatible with ANSI 125# & 150# FlangesFull PortMinimal Pressure DropLight WeightSpring Assisted Closing for Quicker Response

PERFORMANCE RATING:Saturated Steam: 125 psi (8.6 Bar) to 353°F (178°C) (2”-12”) 100 psi (6.9 Bar) to 338°F (170°C) (14”-24”)Cold Working Pressure: 200 psi (13.8 Bar) at 100°F (2”-12”) 150 psi (10.3 Bar) at 100°F (14”-24”)Temperature Range: -20°F to 406°F

MATERIALS:Body: ASTM A126 CL-B, CIDisc: Aluminum BronzeSeat: Nitrile (Buna-N)


DEFINITIONS

910WE SERIES

Part Number6WC-108-E16WC-109-E16WC-100-E16WC-10A-E16WC-10B-E16WC-10C-E16WC-10E-E16WC-10G-E16WC-10H-E1

NPS2

2 1/234568

1012

Length2.122.382.622.623.253.755.005.507.12

Dia.4.004.755.256.757.508.50

11.0013.2516.00

Weight3.06.08.0

13.017.025.047.067.0

118.0

Class 125 WAFER CHECK All dimensions are in inches and pounds.

FEATURES:Compatible with ANSI 125# & 150# FlangesFull PortMinimal Pressure DropLight WeightSpring Assisted Closing for Quicker Response

PERFORMANCE RATING:Saturated Steam: 125 psi (8.6 Bar) to 353°F (178°C)Cold Working Pressure: 200 psi (13.8 Bar) at 100°FTemperature Range: -20°F to 406°F

MATERIALS:Body: ASTM A126 CL-B, CIDisc: Aluminum BronzeSeat: EPDM

VALVE TYPES:Apollo offers class 125 and 250 cast iron Gate, Globe and Swing Check valves in a variety of configurations and sizes:Gate Valves: Flanged Cast Iron Gate Valves are Solid Wedge Design (Type I) with bronze mounted seat rings and are available in both non-rising stem and OS&Y configurations. Globe Valves: Flanged Cast Iron Globe valves are offered in Type I (in line metal to metal seated) with bronze mounted seat rings. All feature OS&Y stem designs.Swing Check Valves: Flanged Cast Iron Swing Check Valves are all Type I (full waterway, metal to metal seated) with bronze mounted seat rings.Wafer Check Valves: Resilient seated, Dual Disc, spring-return design intended for installation between Class 125 or Class 150 flanges.

PRESSURE RATINGS:

SWP: “Steam Working Pressure” is defined as the maximum allowable working pressure for saturated steam service.CWP: The abbreviation for “Cold Working Pressure” and is the allowable working pressure for the device in the temperature range of -20°F to 150°F (-29°C to 66°C)Class 125: The CWP for Apollo’s Class 125 valves is 200 psig.Class 250: The CWP for Apollo’s Class 250 valves is 300 psig125 SWP: The SWP for Apollo’s Class 125 metal to metal seated valves is 125 psig.*150 SWP: The SWP for Apollo’s Class 150 metal to metal seated valves is 150 psig.** The maximum saturated steam working pressure (SWP) for soft seated valves is determined by the limits of the non-metallic materials.

TEMPERATURE RATINGS:Maximum temperature ratings for valves with non-metallic seating (such as is offered in some check valves) are dependant upon the composition of the sealing element. It is the responsibility of the user to specify the service conditions and verify that the valves selected are suitable for their intended use.

END CONNECTION:Flanged Ends: All iron valves (with the exception of wafer checks) are supplied with flanged ends which comply with ASME B16.10.

Definitions

STEM TYPES:Rising Stem: Rising stem, inside screw is the most common stem design used in bronze gate and globe valves. In the fully open, back seated position the stem threads are isolated from the media. The rising stem also give a clearly visible indication as to whether the valve is open or closed. Because the stem and handle rise above the valve during operation, adequate clearance must be provided.Non-Rising Stem: Applicable only to gate valves, valves with non-rising stems have a lower profile but the stem threads are exposed to the media, leaving them subject to damage form erosion, corrosions or deposits. There is no clear open-closed indication.

BONNET OPTIONS:

All Apollo cast iron gate, globe and swing check valves utilize bolted bonnet construction.

MATERIALS OF CONSTRUCTION:

All materials of construction comply with the requirements of the governing MSS specification. Cast iron body and bonnet material is ASTM A126 Class B. All bolting is equal to or better than ASTM A307 B.

STEM PACKING:

All Apollo Iron Gate and Globe valves are factory equipped with Die-Formed Graphite stem packing which provides tight shut-off under a wide range of service conditions.

MARKING:

All Apollo Gate, Globe and Check valves are marked in compliance with MSS SP-25 and the governing MSS product standard.

TESTING:Each Apollo iron Gate, Globe and Check valve is tested in compliance with MSS SP-70, SP-71 or SP-85 as appropriate.

STANDARDS COMPLIANCE:ASME B16.10, “Face to Face and End to End Dimensions of Valves”ASME A126 CLASS B, “Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings”ASTM A307, “Specification for Carbon Steel Bolts and Studs, 60000 psi Tensile Strength”MSS SP-25, “Standard Marking System for Valves, Fittings and Flanges and Unions”MSS SP-70, “Gray Iron Gate Valves Flanged and Threaded Ends”MSS SP-71, “Gray Iron Swing Check Valves Flanged and Threaded Ends”MSS SP-85, “Gray Iron Globe and Angle Valves Flanged and Threaded Ends”

CAUTIONS:

Bubble tight shut-off should not be expected on metal seated check valves. MSS SP-71 defines acceptable leakage rates as 40 ml of water per hour per inch of Nominal Pipe Size (NPS) or 0.4 ml Standard Cubic Foot (SCF) gas per hour per inch of NPS.

Bubble tight shut-off should not be expected on metal to metal seated Gate or Globe valves. MSS SP-70 and SP-85 defines acceptable leakage rates as 10 ml of water per hour per inch of Nominal Pipe Size (NPS) for 0.1 ml SCF of gas per hour per inch of NPS).

Gate valves are not recommended for throttling service and should only be used in the fully open or fully closed positions to minimize vibration and chatter which may damage the seat or wedge. For throttling applications refer to Apollo’s Globe valve offering.

Properly sized swing check valves frequently are smaller than the pipe in which they are used. This practice keeps velocities up so the valve operates near full open, minimizing noise and vibration while extending valve life.

Customer Service (704) 841-600010

www.apollovalves.com

DEFINITIONS


Actuation & Controls Catalog Bronze Gate, Globe & Check Catalog

34HL Temperature Control Valve Catalog

Mixing Valves Catalog

Water Pressure Reducing Valves Catalog

Water Gauges & Liquid Level Catalog

Flanged Iron Strainers CatalogSafety Relief Valves Catalog

Backflow Prevention Catalog Butterfly Valves Catalog

Commercial Products Catalog

OTHER AVAILABLE PRODUCTS FROM APOLLO

CROSS REFERENCE CHART

Apollo Model Apollo P/N Size Range Description

Design Standard Crane Model Hammond Model Kitz Model Milwaukee Model Nibco Model Stockham Model Walworth Model



101T30-00X-011/4” to 3”

MSS SP-80 428

IB64024

148T111

B100K55

161S61Y-09X-011/2” to 3”

MSS SP-80 1340IB912

1509S413B

B309YK3406SJ

102S30-04X-011/2” to 3”

MSS SP-80 1320IB647

41115

S113B104K

4SJ

161T61Y-19X-01

1/4” to 3”

MSS SP-80 37

IB90422

509T413B

B319YK3406

102T30-03X-011/4” to 3”

MSS SP-80 438

IB64540

105T113

B103K4

162T61Y-20X-VI1/4” to 2”

MSS SP-80

T413VB320BYK

Class 125 (200 CWP, 125 SWP)Gate ValveBronzeThreaded Bonnet Solid WedgeRising StemNPT

200 CWPSwing CheckBronzeY-PatternBronze DiscSolder Ends

200 CWP Gate ValveBronzeThreaded Bonnet Solid WedgeNRSSolder Ends

Class 125 (200 CWP, 125 SWP)Swing CheckBronzeY-Pattern Bronze DiscNPT

Class 125 (200 CWP, 125 SWP)Gate ValveBronzeThreaded Bonnet Solid WedgeNRSNPT

Class 125 (200 CWP, 125 SWP)Swing CheckBronzeY-Pattern Viton® DiscNPT

GATE

Valv

esCH

ECK

Valv

es

101T-LF30LF-00X-01

1/4” to 3”

MSS SP-139

UP148

161S-LF61YLF-09X-01

1/2” to 2”

MSS SP-139

UP1509

102S-LF30LF-04X-01

1/2” to 3”

MSS SP-139

UP115S113-LF

161T-LF61YLF-19X-01

1/4” to 2”

MSS SP-139

UP509

Class 125 (200 CWP, 125 SWP)Gate ValveLF-BronzeThreaded Bonnet Solid WedgeRising StemNPT

200 CWP Swing CheckLF-BronzeY-PatternBronze DiscSolder Ends

200 CWPGate ValveLF-BronzeThreaded Bonnet Solid WedgeNRSSolder Ends

Class 125 (200 CWP)Swing CheckLF-BronzeY-PatternBronze DiscNPT



BASE METAL

Bronze

Iron

CROSS REFERENCE CHART102T-K

30-03X-01K1/4” to 3”

MSS SP-80

T113-K

163T-LF61YLF-20X-T1

1/2” to 2”

MSS SP-139

822T

T413Y-LF

106T30-28X-011/4” to 3”

MSS SP-80 437

IB64646

1140T133

B128K14

910F6SC-10X-B1

2” to 24”

MSS SP-71 373

IR1124

2974MF918BG931

W928F

610F6GA-10X-B1

2” to 24”

MSS SP-70 461

IR1138

2882MF619G612

W719F

920F6SC-20X-B1

2” to 8”

MSS SP-71 39E

IR322

2970MF968BF947

W8970F


Class 125 (200 CWP)Swing CheckLF-BronzeY-PatternPTFE DiscNPT


Class 125FlangedSwing CheckCast IronIBBM

Class 125 FlangedGate ValveCast IronNRSIBBM

Class 250FlangedSwing CheckCast IronIBBM

103T30-05X-011/4” to 3”

MSS SP-80 428UBIB617

1152T124

B105K2

164T61Y-21X-01

1/4” to 3”

MSS SP-80 137

29510

T433bB321K

107T30-20X-011/4” to 3”

MSS SP-80 431UBIB629

421151T134

B120K11

910FLW6SC-10X-B1L

2” to 12”

MSS SP-71 383

C2974MLWF918BLWG931W

102T-LF30LF-03X-01

1/4” to 3”

MSS SP-139

UP105T113-LF

163T61Y-20Y-T1

1/4” to 2”

MSS SP-80 41TFIB940

22T509T

T413YB320TYK

620F6GA-20X-B1

2” to 12”

MSS SP-70

F669F661

910WB6WC-10X-N1

2” to 24”

IR9253

1400W910BWG970

621F6GA-21X-B1

2” to 12”

MSS SP-70 7 1/2EIR330

2894MF667-O

F667W786F

611F6GA-11X-B1

2” to 24”

MSS SP-70 465 1/2IR1140

2285MF617-O

G623W726F

910WE6WC-10X-E1

2” to 12”

WG961

Class 125 (200 CWP, 125 SWP)Gate ValveBronzeUnion Bonnet Solid WedgeRising StemNPT

Class 150 (300 CWP, 150 SWP)Swing CheckBronzeY-Pattern Bronze DiscNPT

Class 150 (300 CWP, 150 SWP)Gate ValveBronzeUnion Bonnet Solid WedgeRising StemNPT

Class 125FlangedSwing CheckCast IronIBBM w/ lever& weight

Class 125 (200 CWP, 125 SWP)Gate ValveLF-Bronze Threaded Bonnet Solid WedgeNRSNPT

Class 125 (200 CWP, 125 SWP)Swing CheckBronzeY-Pattern PTFE DiscNPT

Class 250FlangedGate ValveCast IronNRSIBBM

Class 125Wafer CheckBunaCast IronIBBM

Class 250 FlangedGate ValveCast IronOS&YIBBM

Class 125 FlangedGate ValveCast IronOS&YIBBM

Class 125Wafer CheckEPDMICast IronIBBM


BASE METAL

Bronze

Iron



CROSS REFERENCE CHART



120S33-14X-013/8” to 2”

MSS SP-80

S211YB14TK3095SJ

121T33-16X-011/4” to 2”

MSS SP-80 1

IB44011

502T211bB16K3058

122T33-22X-011/4” to 3”

MSS SP-80 7TF

IB413T9

590TT235YB22TK3095

200 CWPGlobe ValveBronzeThreaded Bonnet PTFE DiscSolder Ends

Class 125 (200 CWP, 125 SWP)Globe ValveBronzeThreaded Bonnet Bronze DiscNPT

Class 150 (300 CWP, 150 SWP)Globe ValveBronzeUnion Bonnet PTFE DiscNPT

GLOB

E Val

ves

120T33-13X-013/8” to 2”

MSS SP-80 5TF

T211YB13TK

121T-LF33LF-16X-01

1/4” to 2”

MSS SP-139

UP502

711F6GB-11X-B1

2” to 10”

MSS SP-85 351

IR116

2981MF718BG512

W906F

721F6GB-21X-B1

2” to 8”

MSS SP-85 21E

IR313

2983MF768BF532

W955F

Class 125 (200 CWP, 125 SWP)Globe ValveBronzeThreaded Bonnet PTFE DiscNPT

Class 125 (200 CWP)Globe ValveLF-BronzeThreaded Bonnet Bronze DiscNPT

Class 125 FlangedGlobe ValveCast IronOS&YIBBM

Class 250 FlangedGlobe ValveCast IronOS&YIBBM

BASE METAL

Bronze

Iron

TERMS, CONDITIONS & WARRANTY INFORMATION

15Customer Service (704) 841-6000

TERMS & CONDITIONS OF SALE

Payment: 2% 10th prox. Net 30 days.All prices F.O.B. shipping point with freight allowed on shipments of 750 pounds and/or $5,000 net minimum to all shipping points within the United States excluding Alaska and Hawaii. No freight allowed on Air Freight or Parcel Post shipments. Claims for shortages must be made within 10 days of receipt of material. Our responsibility ends when a delivery receipt is furnished us by the carrier.No invoice rendered For Less than $50.00.No freight will be allowed on Air Freight, Air Express, Parcel Post or U.P.S. shipments.All Conbraco products may be combined to make sufficient weight for full freight allowance.Phone order quoted prices are subject to correction. Prices and designs are subject to change without notice.Orders for material of special design or specification are made to customer’s order and are not subject to cancellation or return.All goods returned to us will not be accepted unless a full explanation has been made and our written authorized permission obtained in advance. All goods returned - if accepted - will be credited at invoice price, less 30% for service and rehandling charges, plus shipping expenses.We reserve the right to adjust orders to box quantities.

WARRANTY AND LIMITATIONS OF LIABILITY - APOLLO INTERNATIONAL® PRODUCTS

Conbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of two years from the date of delivery toyou, our initial purchaser.

Should any failure to conform to this warranty appear within two years after the date of the initial delivery to our initial purchaser, Conbraco will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco’s recommendations and standard industry practice, correct such defects by suitable repair or replacement at Conbraco’s own expense.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of Conbraco to our initialpurchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether express or implied shall pass through our initial purchaser to any other person or corporation.

LIMITATION OF LIABILITY: Conbraco Industries, Inc. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, DAMAGE TO LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET FORTH HEREIN, ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE CONBRACO GOODS UPON WHICH SUCH LIABILITY IS BASED.

Conbraco® and Apollo® are registered trademarks of Conbraco Industries Inc. Conbraco Industries Inc. reserves the right to change specifications without notice.

for additional information, submittal sheets and manuals, visit www.apollovalves.com

Spirit Group FL (except Pan Handle) [email protected] 407-291-6035 407-299-0378Spotswood Associates GA/AL [email protected] 770-447-1227 770-263-6899Pro Marketing, Inc. NC/SC/TN-East [email protected] 864-578-4334 864-578-4889Mid South Marketing, Inc. VA/MD/Washington, D.C./WV-East [email protected] 804-213-3801 804-213-3802

Southern Marketing Group MS/TN-West/AR/Bowie Cty.-TX [email protected] 901-547-0042 901-547-0035Marathon Flow Control TX, OK, KS except Northeast, LA (Industrial) 855-483-5029 855-483-5030BWC Inc. LA (Commercial Products) [email protected] 504-734-0229 504-734-3711

New Tech Marketing Northern-IL/WI-East/IN/MI-UP/IA-River Counties [email protected] 630-378-4300 630-378-0343New Tech Marketing MO/Southern IL/Northeast Kansas [email protected] 618-394-0329 618-394-0427V.E. Sales Co., Inc. MI (Except Upper Peninsula) [email protected] 586-774-7760 586-774-1490FourMation Sales MN/ND/SD/WI-West [email protected] 763-420-6900 763-420-6993Marshall-Rodeno Heartland NE/IA (Except River Counties) [email protected] 303-575-6701 303-575-6706Midwest Spec KY/OH/PA-West/WV-West [email protected] 330-538-0406 330-538-0410

Spec Management Group HI [email protected] 949-481-4225 949-487-0990Elmco Duddy CA - South [email protected] 626-333-9942 626-855-4811Marshall-Rodeno Associated CO/WY/MT/ID-SE/UT/NV-NE/NM/El Paso-TX [email protected] 303-575-6701 303-575-6706Gordon & Associates WA, OR, AK, Northern counties ID [email protected] 360-566-1470 360-566-1478Southwestern Industrial Sales Co. AZ/Nevada-SW [email protected] 480-458-5838 480-458-5843Southwest Valves CA (Waterworks and Fire Protection) [email protected] 559-261-2703 559-261-2711

Urell, Inc. MA/New England States [email protected] 617-923-9500 617-926-9414Conroy & Griese Sales, Inc. NY-East/NJ-North [email protected] 856-663-4440 856-663-6644Layden Company NY-Upstate/PA-East/DE/NJ-South [email protected] 610-363-6657 877-529-3361Keith Engle & Associates OEM accounts [email protected] 610-827-9560 610-827-9561

Active Sales Northwest, Inc. OR, WA, Western ID [email protected] 541-726-0320 541-726-1148 Biz Sales Company OH, KY, MI, IN, parts of PA, WV, WI [email protected] 216-595-2888 216-595-2899Formation Sales MN/ND/SD/WI-West [email protected] 763-262-4700 763-262-4740Jim Benton & Associates AL, FL Panhandle [email protected] 205-664-1221 205-664-1277J&J Midwest Sales NE, IA, MO, KS [email protected] 815-806-0202 815-806-0303Marel Enterprises New England, NY, DE, MD, VA, DC, parts of PA & WV [email protected] 631-271-1718 631-427-8558Marshall-Rodeno Associated CO/WY/MT/ID-SE/UT/NV-NE [email protected] 303-575-6701 303-575-6706NSC Marketing Group Inc. OK [email protected] 918-627-5340 918-664-1408Pro Marketing, Inc. NC/SC/TN-East [email protected] 864-578-4334 864-578-4889Southern Marketing Group MS/TN-West/AR/Bowie Cty.-TX [email protected] 901-547-0042 901-547-0035Spec Management Grop CA-South, HI

Conbraco Industries, Canada 178 Pennsylvania Ave., Unit 1, Concord, Ontario L4K 4B1 [email protected] 905-761-6161 905-761-6666Barclay Sales Ltd. British Columbia [email protected] 604-945-1010 604-945-3030D & M Mechanical Sales Ontario/East [email protected] 613-384-7084 613-384-3407Dynamic Agencies, Ltd. Saskatchewan [email protected] 306-343-1901 306-343-1901Tom Beggs Agencies Ltd. Manitoba/NW Ontario [email protected] 204-953-1900 204-774-6915Task Controls, Inc. Ontario [email protected] 416-291-3004 416-754-3481Agences J. Pierre Sylvain, Inc. Quebec [email protected] 450-655-9588 450-641-2737Kern Industries, Ltd. Alberta-North [email protected] 780-451-2056 780-454-6687Kern Industries Calgary, Ltd. Alberta-South [email protected] 403-730-7791 403-239-8179J. Levandier Sales, Inc. Nova Scotia, New Brunswick, Prince Edward Island & Newfoundland [email protected] 506-858-1615 506-858-1084 Key to the North Sales Agency, Inc. Ontario-North [email protected] 705-524-6714 705-566-0148

Conbraco International Sales: Mexico [email protected] 956-631-4542 956-631-4681 Caribbean [email protected] 787-739-5620 Central & South America 832-220-3783 [email protected] 65-9626-9241 65-6753-0131 Europe/Africa/Australia/Israel CONTACT CUSTOMER SERVICE 704-841-6000 704-841-6021 Sadek Trading Middle East (except Israel) [email protected] 704-618-6613 980-233-8437

MID

WES

TERN

RE

GION

Brian Blalock (East)[email protected]: (704) 614-3744fax: (704) 841-6021

Jimmy White (Central)

phone: (731) 234-2372fax: (731) 779-3608

Sanford Pauly (North Central)[email protected]: (513) 716-7772fax: (513) 321-7717

Ron Fortner (South Central)[email protected]: (713) 203-9207fax: (281) 464-3736

Steve Brown (Northwest)[email protected]: (425) 985-5095fax: (253) 862-3548

Skip Wilson (West)[email protected]: (760) 330-3293fax: (775)854-5722

Ron Modugno (West)

phone: (661) 910-5058fax: (661) 775-0713

phone: (386) 451-2307

SOUT

HEAS

T RE

GION

SOUT

HERN

RE

GION

WES

TERN

RE

GION

CANA

DAIN

TERN

ATIO

NAL

NORT

HEAS

T RE

GION

IRRI

GATI

ON O

NLY

REPS

Phone: (704) 841-6000Fax: (704) 841-6020


SALES & CUSTOMER SERVICE:

email phone fax

David Beyer (Northeastern)

phone: (561) 718-9379

Rick Williamson (Southeast)

APOLLO VALVES REGIONAL MANAGERS LASCO FITTINGS IRRIGATION REGIONAL MANAGERSP.O. Box 247, Matthews, NC 28106 P.O. Box 116, Brownsville, TN 38012

GGCC

STIR

ON - D

KM 7.

5K

7/

11Pr

inte

d in

the U

SA

a history of - wainbee · 2011-09-23 · a history of quality, service and innovation now in its...

Documents