a high quality, high specification vertical machining...
TRANSCRIPT
MILLINGBridgeport GX 1600-50 Machining Center
Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice
Contact: Contact Name Address: ShipToAddressLine1
ShipToAddressLine2ShipToAddressLine3ShipToAddressLine4ShipToCity1, ShipToState, ShipToCountry
Date: Month/Day/YearPrices Valid for 30 Days
Your Hardinge RepresentativeSales Person Name
PhoneEmail
Address 1Address 2
City, State, Zip
TURNING MILLING GRINDING WORKHOLDINGwww.bpt.com
Machine Summary and Quotation
Thank you for taking the time to discuss your machine requirements. After reviewing your needs, we are pleased to present the Bridgeport GX 1600-50 Machining Center as a solution to your machining requirements.
The GX 1600-50 is loaded with features and benefits that are unlike any competitive machine tool:
Robust 50 Taper Spindle
Designed for rugged heavy cutting
Heavy duty cast iron base for added stiffness, superior damping characteristics, and added thermal stability.
Large pretension and stretched double nut ball screws
Advanced Fanuc i series control with productivity enhancing options
The GX 1600-50 is ideal whether you are a job shop or OEM, the machine was designed with flexibility and throughput in mind.
Included Features
• 10.4” color LCD • AICC Contour Control• 10,000 RPM Spindle • Rigid Tapping• CT 50 – Big Plus • Low Voltage Worklight• Handheld Manual Pulse Generator • On board PCMCIA memory card slot• Fully interlocked machine guarding • Manual Guide i Conversational Programming • Spindle Oil Chiller (Belt Driven Model Only) • Prep for Through Spindle Coolant• CNC Control – Fanuc i Series GX
“No tool holders are provided as standard equipment with this machine – these must be purchased separately. We offer an extensive line of high-quality tool holders. Please consult with your sales representative for a complete list.”
Please refer to the attached lists for available options and full machine specifications.
Machine Options
Tool Changer Factory installed pricing only GX 1600-50
Swing Arm Automatic Tool Changer CAT24 Tools (CAT-Tooling) Standard INCLUDED
Coolant SystemComplete coolant system Standard INCLUDEDChip Wash Down Standard INCLUDEDThrough Spindle Coolant (300 PSI) OptionPrep for Through Spindle Coolant (Supports 280-1,000PSI) Standard INCLUDED Factory Fit OnlyPart 2 of Through Spindle Coolant For 280 PSI Option
(Only to be used when TSC Prep is already installed)Coolant Wash Gun Option
Contgrol (Factory installed pricing only)Fanuc i Series GX 10.4 Color LCD Standard INCLUDEDAICC look ahead control Standard INCLUDEDData Server, Ethernet Interface 100MB, ATA Flash Card 256MB OptionNote: Data Server Option (above is factory installed only
Electonics
Fanuc controls are 208-230 volt systems and require a transformer for any voltage outside the standard operating range.
Spindle
10,000 RPM Belt Driven Spindle (included in model 1600F0DP) StandardIncludes Spindle Oil Chiller
6,000 RPM Gearbox Spindle (included in model 1600F0D) Standard
CT-50 Spindle Taper Standard INCLUDED
Miscellaneous Options (Factory installed pricing only)
Chip Conveyor (Hinge/Belt type – better for long stringy chips) Standard INCLUDEDAbsolute Linear Encoder (Glass scales) 1um (X, Y and Z axes) OptionNote: factory install onlyChip Conveyor (scrapper type – better general purpose) OptionNote: Only for small, short and fine chipsAutodoor Note: factory install only OptionAuto power OFF (M80/M30) OptionAir Blast for Dry Cutting Option Tri-Color Light Tower Option
PROBING
OMP40 OTS OMI2T Kit – Renishaw (NV 0002536COMBO5) OptionWireless Probe Interface (required for NV 0002536COMBO5) OptionPlease note the above items do not include installation
Machine Specifications
Axis TravelTable (X axis) 63 in. (1600mm)Saddle (Y axis) 27.5 in. (700mm)Head (Z axis) 25 in. (635mm)
Positioning Auto Mode (X and Y axes) 1,417 in./minAuto Mode (Z axis) 1,417 in./min.Manual Mode (X,Y and Z axes) 0-354 in./min.Feedrate Range (X and Y axes) 0.1-.472 in./min.Feedrate Range (Z axis) 0.1-.472 in./min.Minimum Increment 0.00004 in.Ball Screw Diameter and Pitch(X, Y) 1.77” x .472”Ball Screw Diameter and Pitch (Z) 1.77” x .472”Axes Thrust (X/Y/Z) Fanuc 2585/2585/2585 lbs
SpindleSpindle Speed Range Belt Driven 10,000 RPMSpindle Speed Range Gearbox 6,000 RPMSpindle Motor HP Rating (CT/S3-60%/S3-25%) Fanuc 29.5/34.8/46.9 hpMax. Spindle Torque 10,000 RPM Belt Driven (S3-25%) Fanuc 160 ft/lbsMax. Spindle Torque 6,000 RPM Gearbox (S3-25%) Fanuc 673 ft/lbsSpindle Taper No. 50Tool Holder CT 50Distance from table surface to Spindle Gauge Plane 5.2” – 30.2” (133-768mm)
WorktableWorking surface 66.9 X 27.5 in. (1700 x 700mm)Table load 3300lbs. (1500 kg)Number of T-Slots 5 on 4.92” centersT-Slot Size .708” (18 mm)
ControlFanuc i Series GX
Swing Arm Style ATC (Standard)Magazine Capacity 24 ToolsTool Select by Shortest Path Bi-DirectionalMaximum Tool Diameter (Adjacent Pockets) 4.29”Maximum Tool Diameter (Adjacent Pockets Empty) 6.10” (10,000 RPM Spindle)Maximum Tool Weight 33.07 lbs.Maximum Tool Length 13.7”Random Tool change time (C to C) 5.8 seconds
Coolant Coolant tank capacity 131 US gallons (400L)
Accuracy ISO 230-2Positioning .0005 in. (.014mm)Repeatability .0003 in. (.007mm)
With Linear Scales Option (X/Y/Z-AXES)Positioning .0003 in. (.008mm)Repeatability .00019 in. (.005mm)
Machine SizeMachine height 113 in. (2,878mm)Floor space 153.4 in. (3,898mm) wide x 109in. (2,724)deepMass of machine 21,560 lbs (9,800kg)
Machine Specifications. Cont
Service Requirements (Fanuc)Electrical Supply (Input) Structure Balanced 3-phaseCycles 60 HzPower 109 FLA (Full Load Amps)
33 KVAVoltage 220 volt
Note: Other voltages require an external transformerCompressed Air (Pressure Flow) 70 psi/4.9 cfmNozzle Coolant 13 gal/min @58 psiWash Down (Option) 13 gal/min @58 psi
Foundation Requirements:To maintain the accuracy of this machine, we recommend that the machine is sited on a flat area free from cracks and expansion joints. The composition of the floor and sub-structure should be of suitable construction to bear the weight of this machine. Any friable areas should be using accepted building construction techniques (to code).
Once a suitable foundation is in place, we recommend that the machine is rigidly bolted to the floor using the bed fixing/ jacking positions to prevent movement or vibration.
All features, benefits and specifications are subject to change. Hardinge Inc. is not responsible for any typographical errors, omissions or misprints.
Fanuc i Series GX Control Specifications
FANUC i Series GX
10.4" Color LCD AICC Contour Control Manual Guide i Controlled axes 4 Simultaneous controlled axes 4 DNC operation with memory card Program restart Dry run High speed skip function Least input increment - 0.001mm, 0.001deg. Fine Acc & Dec control Servo control HRV3 Backlash compensation Linear interpolation Chamfering and corner rounding Coordinate system rotation Scaling Cylindrical interpolation Helical interpolation (Circular interpolation plus Max. 2 axes linear interpolation) Polar coordinate command Circular interpolation (Multi-quadrant is possible) Programmable mirror image Background editing Extended editing Dynamic graphic display Multi language display Run hour and parts count display Automatic acceleration /deceleration Automatic corner overide Rapid traverse: linear Cutting feed: exponential Tool offset pairs, ± 6 digits, 400 pairs Tool length compensation Tool offset memory C Cutter compensation C Part program storage length 640 m Number of registered programs 400 Self-diagnosis function Alarm history display Operation history display Help function Stored pitch error compensation Sub call Custom Macro B Additional custom macro variables Canned cycles for drilling Small hole peck cycle Tool life management Workpiece coordinate system, G52 - G59 Addition of workpiece coordinate system 48 pairs Automatic tool length measurement Inch / Metric
GX 1600-50 Floor Plan
GX 1600-50 Spindle Output
Hardinge Indexer and Rotary Products
Hardinge and Bridgeport make it easy to select and connect a rotary table or indexer. Plug in a rotary package and get connected to 4th-axis part's positioning. Hardinge gives you the tools to increase your machine capability with rapid positioning speeds and fast changeover with the most flexible, quick-change workholding concept on the market! Most Hardinge rotary products incorporate a 5C threaded-nose, A2-4 or A2-5 spindle that will accept collets, expanding collets and step chucks to expand part gripping capabilities for improved part accuracies. Hardinge has a large selection of rotary products for all ranges of production.
The Most Flexible Quick-Change Workholding Concept on the Market…Hardinge’s A2-4 (5C) and A2-5 (16C) spindle nose designs allow quick change between collets, expanding collets, step chucks, 3-jaw chucks and face plates. Common spindle tooling can be shared between the Hardinge Rotary System(s) and a lathe. The gripping is in the spindle, closest to the spindle bearings, unlike surface-mounted adapters used on traditional rotary tables. Multiple workholding options provide alternate gripping solutions for increased precision and capability.
5C Rotary 16C Rotary LP 160 LP210
Drive Package
CI 000040021AE4th Axis Drive Package for HARDINGE 5C, 16C AND 3J. 20 AMP Alpha Drive (Used only on Machines that are already Pre-Wired)
Hardinge 4th Axis Rotary Table
5C1FAMC 5C 4th Axis Rotary Table with Manual Collet Closer
5C1FAHF 5C 4th Axis Rotary Table with High-Force Collet Closer
5CAFAFS 5C 4th Axis Rotary Table with Fail-Safe Collet Closer
16C1FA 16C 4th Axis Rotary Table with Pneumatic Collet Closer and Pneumatic Clamp
LP160FA4th Axis Low Profile 160mm Rotary Table with A2-4 (5C) Spindle Nose, Pneumatic Clamp and Slotted Face Plate
LP210FA4th Axis Low Profile 210mm Rotary Table with A2-5 (16C) Spindle Nose, Pneumatic Clamp and Slotted Face Plate
Hardinge Indexer
5C1XNMC Hardinge 5C Indexer with Manual Collet Closer and Servo Control Box
5C1XNHF Hardinge 5C Indexer with High-Force Collet Closer and Servo Control Box
5C1XNFS Hardinge 5C Indexer with Fail-Safe Collet Closer and Servo Control Box
16C1XN Hardinge 16C Indexer with Pneumatic Collet Closer, Servo Control Box and Pneumatic Clamp
Contact the Hardinge Rotary Sales Department for information on specific table placement for each individual rotary product. Rotary dimensions and specifications are available in brochure #2372H.
Hardinge and Bridgeport… positioning you for success.
Investment Summary for ABMNameAlphaQuote Number:All Prices in: SOHCurrencyCodeFrom
Qty UOM Description Unit Price Extended
Total Investment: $XXXX