981-0246e ky kyd(7 07) - las motorhomesprinted in u.s.a. 981−0246e (ky spec a−l and kyd spec...

Printed in U.S.A. 981−0246E(KY Spec A−L and KYD Spec A−B)

Parts Catalog

Genset

Replaces 6−99 (Spec A−J)

KYKYD

7/07

Redistribution or publication of this documentby any means, is strictly prohibited.

The following symbols are used in Onan manualsto alert users to the potentially dangerous condi-tions relating to maintenance of equipment and re-placement of parts. Please read and observe.

This symbol warns of immedi-ate hazards which will result insevere personal injury or death.

This symbol refers to a hazardor unsafe practice which can re-sult in severe personal injury ordeath.

This symbol refers to a hazardor unsafe practice which can re-sult in severe personal injury orproduct or property damage.

To avoid errors or delay in filling your parts order,always give the MODEL, SPEC NO. and SERIALNO. from the Onan nameplate.

For handy reference, insert your nameplate infor-mation in the spaces below.

MODEL AND SPEC NO.

SERIAL NO.

DIGITAL CONTROL SOFTWARE VERSIONAND DATE (IF APPLICABLE)

Contact with USED ENGINE OILS has been identified by a United States federal agency and some USAstate agencies as causing CANCER or REPRODUCTIVE TOXICITY. When checking or changing engineoils take all necessary precautions not to ingest, breathe the fumes or contact the used oil.

Contact with ASBESTOS has been identified by a United States federal agency and some USA stateagencies as causing CANCER or REPRODUCTIVE TOXICITY. When handling engine gaskets take allnecessary precautions not to ingest, breathe or contact the dust from the gaskets! Use adequate ven-tilation and wear protective gloves, masks and clothing!

Contact with BENZINE and LEAD, found in gasoline, fuel additives and solvents has been identifiedby a United States federal agency and some USA state agencies as causing CANCER or REPRODUC-TIVE TOXICITY. When checking, draining or adding gasoline and fuel additives or using solvents takeall necessary precautions not to ingest, breathe the fumes or contact the liquids. Use adequate ventila-tion and wear protective gloves, masks and protective clothing!

PSP-1

Service and repair of Onan equipment must be performed by trained, experienced personnel only. Im-proper service or repair may result in property damage, severe personal injury or death. Do not use thiscatalog as a guide to servicing your equipment. Read and follow the IMPORTANT SAFETY IN-STRUCTIONS in the Service Manual appropriate for the equipment you are working on.


1

Introduction

This parts manual applies to the KY Recreational Vehicle Sets as listed in the Generator Set Data Table. Parts are

arranged in groups of related items and each illustrated part is defined by a reference number corresponding to the

same reference number in the parts list. Parts illustrations are typical. Using the model and specification number from

your generator set nameplate, select parts that apply to your set. Right and left sides are determined by facing the

engine end (front) of the set.

Generator Set Data Table

MODEL AND Wiring

SPECIFICATION WATTS VOLTS HERTZ FUEL Diagram

3.3KY−FR/11544F 3300 100 50 LPG Vapor 611−1245−033.3KY−FR/11544G 3300 100 50 LPG Vapor 611−1264−03

3.3KY−FR/26119B−E 3300 230 50 LPG Vapor 611−1226?3.3KY−FR/26119F 3300 230 50 LPG Vapor 611−1245−053.3KY−FR/26119G−H 3300 230 50 LPG Vapor 611−1264−053.3KY−FR/26119J−L 3300 230 50 LPG Vapor 611−1268−05

3.3KY−FR/4858L 3300 230 50 LPG Vapor 611−1268−05

3.3KYD−3272A−B 3300 230 50 LPG Vapor 611−1268−053.3KYD−4859B 3300 230 50 LPG Vapor 611−1268−05

3.6KY−FA/11276A 3600 120 60 LPG Vapor 611−1194

3.6KY−FA/26120B−E 3600 120 60 LPG Vapor 611−12253.6KY−FA/26120F 3600 120 60 LPG Vapor 611−12463.6KY−FA/26120G−H 3600 120 60 LPG Vapor 611−12653.6KY−FA/26120G−H 3600 120 60 LPG Vapor 611−1265

3.6KY−FR/11572G−H 3600 100 50 Gasoline 611−1263−033.6KY−FR/11572J−K 3600 100 50 Gasoline 611−1268−03

3.6KY−FR/33742B−E 3600 220 50 Gasoline 611−1212?3.6KY−FR/33742F−H 3600 230 50 Gasoline 611−1245−053.6KY−FR/33742J−K 3600 230 50 Gasoline 611−1268−053.6KY−FR4856K 3600 230 50 Gasoline 611−1268−05

3.6KYD−3270A−B 3600 120 60 LPG Vapor 611−12673.6KYD−3271A 3600 230 50 Gasoline 611−1268−053.6KYD−4857A 3600 230 50 Gasoline 611−1268−05

Continued on next page. −−>


2

* − The diagonal line (/) in the model and specification number separates generator set characteristicsfrom the specification number and letter. The specification number denotes customer requested options

or deviations from a standard model. The specification letter advances (A to B, B to C, etc.) with major

manufacturing changes Continued from page 1.

Generator Set Data Table

MODEL AND Wiring

SPECIFICATION WATTS VOLTS HERTZ FUEL Diagram

4.0KY−FA/11320E 4000 120 60 Gasoline 611−12254.0KY−FA/11320F 4000 120 60 Gasoline 611−12464.0KY−FA/11320G−H 4000 120 60 Gasoline 611−12654.0KY−FA/11320J 4000 120 60 Gasoline 611−12674.0KY−FA/11580G−H 4000 120 60 Gasoline 611−12654.0KY−FA/11580J−K 4000 120 60 Gasoline 611−1267

4.0KY−FA/26100A 4000 120 60 Gasoline 611−11944.0KY−FA/26100B−E 4000 120 60 Gasoline 611−12254.0KY−FA/26100F 4000 120 60 Gasoline 611−12464.0KY−FA/26100G−H 4000 120 60 Gasoline 611−12654.0KY−FA/26100J−K 4000 120 60 Gasoline 611−1267

4.0KY−FR/11429E 4000 100 60 Gasoline 611−1268−034.0KY−FR/11429F 4000 100 60 Gasoline 611−1255−034.0KY−FR/11429G−H 4000 100 60 Gasoline 611−1263−034.0KY−FR/11429J−K 4000 100 60 Gasoline 611−1268−03

4.0KY−FR/65697E 4000 100 60 Gasoline 611−1268−044.0KY−FR/65697F 4000 100 60 Gasoline 611−1255−044.0KY−FR/65697G−H 4000 100 60 Gasoline 611−1263−044.0KY−FR/65697J−K 4000 100 60 Gasoline 611−1268−04

4.0KY−FA6747K 4000 120 60 EVAP Gas 611−1267

4.0KYD−3269A 4000 120 60 Gasoline 611−1267

* − The diagonal line (/) in the model and specification number separates generator setcharacteristics from the specification number and letter. The specification number de-

notes customer requested options or deviations from a standard model. The specifica-

tion letter advances (A to B, B to C, etc.) with major manufacturing changes.


Index

3

Adapter, Carb, 19, 21

Adapter, Carb , 27

Adapter, Exhaust (KY), 38

Adapter, Gasoline Air Cleaner (KY Spec A−H), 17Adapter, LP Air Cleaner (KY Spec A−D), 23Adapter, LP Air Cleaner (KY Spec E−K and KYD), 25Adapter, Resonator (KY Spec A), 41

Arm, Rocker, 8

Armature, Starter (KY Begin Spec K and KYD), 31

Armature, Starter (KY Spec A−J), 30Assy Cylinder, Air Wrap, 27

Assy, Carburetor, 21

Assy, Cylinder Air Wrap, 19, 21

Backplate, Exhaust (KY), 38

Barrier, Exhaust (KY Begin Spec B), 43

Base, Enclosure (KY Begin Spec B), 43

Base, Enclosure (KY Spec A), 41

Base, Enclosure (KYD), 44, 45

Base, KY Underfloor, 53

Base, Oil (KY Begin Spec B and KYD), 34

Base, Oil (KY Spec A), 33

Bearing, Balancer Shaft, 11

Bearing, Block End, 9

Bearing, Camshaft, 10

Bearing, Flange, 19, 21

Bearing, Flange (KY Spec A−H), 17Bearing, Gearcase End, 9

Bearing, Rotor (KY Begin Spec B and KYD), 57

Bearing, Rotor (KY Spec A), 55

Bezel, On/Off Switch Mounting (KY Spec A), 55

Block Assy, Brush, 29

Block Assy, Brush (KY Spec A), 28

Block, Brush, 29

Block, Brush (KY Spec A), 28

Board, PC (KY Begin Spec B), 43

Board, PC (KY Spec A), 41

Boot, Generator Harness Insulating (KY Begin Spec J andKYD), 63

Boot, Generator Harness Insulating (KY Spec B−F), 61Boot, Generator Harness Insulating (KY Spec G−H), 62Boot, Spark Plug, 29

Boot, Spark Plug (KY Spec A), 55

Boot, Spark Plug (KY Spec B−H), 58Brace, KY Underfloor Mounting Back , 52

Bracket, Control (KY Spec A), 41

Bracket, Control (KY Spec B−H), 43Bracket, Fuel, 21

Bracket, Fuel Regulator (KY Begin Spec L and KYD BeginSpec B), 27

Bracket, Inlet Insulation (KY Begin Spec B), 49

Bracket, Muffler (KY Spec A), 35

Bracket, Regulator (KY Spec A−D), 23Bracket, Regulator (KY Spec E−K and KYD), 25Bracket, Solenoid (KY Spec A−D), 23Bracket, Solenoid (KY Spec E−K and KYD), 25Bracket, Transformer (KY Begin Spec B and KYD), 57

Breaker, Circuit (KY Begin Spec J and KYD), 59

Breaker, Circuit (KY Spec A), 55

Breaker, Circuit (KY Spec B−H), 58Brush, Generator, 29

Brush, Generator (KY Spec A), 28

Bushing, Enclosure Base (KY Begin Spec F), 43

Bushing, Fuel Tank Reducer, 40

Cable, Starter, 29

Cable, Starter (KY Spec A), 55

Camshaft, 10

Cap, Choke Dome (KY Spec A−H), 17Cap, Dome, 19, 21

Cap, Starter Drive (KY Begin Spec K and KYD), 31

Cap, Starter Drive (KY Spec A−J), 30Cap, Starter End (KY Begin Spec K and KYD), 31

Cap, Starter End (KY Spec A−J), 30Carburetor (KY Spec A−H), 17Carburetor Gasoline (KY Spec A−H), 17Carburetor LP (KY Begin Spec L and KYD Begin Spec B),27

Carburetor LP (KY Spec A−D), 23Carburetor LP (KY Spec E−K and KYD), 25Carburetor, (KY Begin Spec J and KYD), 18, 20

Carburetor, LP (KY Spec A−D), 23Carburetor, LP (KY Spec E−K and KYD), 25Charger, Battery (KY Begin Spec B), 49

Clip, Governor Retainer, 13

Clip, Piston Pin, 9

Clutch, Starter (KY Spec A−J), 30Coil, Ignition (KY Begin Spec J and KYD), 29

Coil, Ignition (KY Spec A), 55

Coil, Ignition (KY Spec B−H), 58Components, Starter (KY Begin Spec K and KYD), 31

Components, Starter (KY Spec A−J), 30Conduit (KY Begin Spec B), 43

Connector, Fuel Tank Barbed Hose, 40

Connector, Fuel Valve Female (KY Spec A−D), 23Connector, Fuel Valve Female (KY Spec E−K and KYD), 25Connector, LP Regulator Hose (KY Spec A−D), 23Connector, Straight (KY Begin Spec B), 43

Control (KY Spec A), 55

Control (KY Spec B−H), 58Coupling, Fuel Tank, 40

Coupling, Fuel Valve Anchor (KY Spec A−D), 23Coupling, Fuel Valve Anchor (KY Spec E−K and KYD), 25Cover Assy, Enclosure (KY Begin Spec B), 49

Cover Assy, Enclosure (Spec A), 47

Cover, Air Cleaner (KY Begin Spec B and KYD), 32

Cover, Air Cleaner (KY Spec A), 28

Cover, Air Cylinder, 15

Cover, Air Filter Thermostat (KY Spec A), 28

Cover, Choke, 19, 21

Cover, Choke (KY Spec A−H), 17Cover, Choke Element, 19, 21

Cover, Choke Element (KY Spec A−H), 17Cover, Crankcase, 11

Cover, Cylinder Air, 19, 21, 27


Index

4

Cover, Drain (KY Begin Spec B), 43

Cover, KY Housing Panel, 53

Cover, Resonator (KY Begin Spec B and KYD), 32

Cover, Starter Spring (KY Spec A−J), 30Cover, Valve, 8

Crankshaft, 9

Cylinder, Air, 15

Dipper, Oil, 9

Edging, Base Pan (KY Begin Spec B), 43

Edging, Base Pan (KY Spec A), 41

Elbow, Enclosure Base Conduit (KY Spec A), 41

Elbow, Exhaust (KY Spec A), 41

Elbow, Exhaust (KY), 38

Elbow, Intake, 19, 21, 27

Elbow, Oil Base Male (KY Begin Spec B and KYD), 34

Element, Air Cleaner (KY Begin Spec B and KYD), 32

Element, Air Cleaner (KY Spec A), 28

Element, Choke Thermostat (KY Spec A−H), 17Element, Thermostat, 19, 21

Element, Thermostat (KY Begin Spec B and KYD), 32

Element, Thermostat Preheat (KY Spec A), 28

Enclosure, Generator (KY Begin Spec B and KYD), 49

Enclosure, Generator (KY Spec A), 47

Endbell, 29

Endbell (KY Spec A), 28

Endbell (KY Spec B and KYD), 29

Exhaust (KY Begin Spec B), 36

Exhaust (KY Spec A), 35

Exhaust (KYD), 37

Filter, Fuel, 19

Filter, Fuel (KY Spec A−H), 17Fitting, Fuel Valve Barbed Hose (KY Spec A−D), 23Fitting, Fuel Valve Barbed Hose (KY Spec E−K and KYDSpec A), 23

Fitting, Fuel Valve Barbed Hose (KY Spec E−K and KYD),25

Flyweight, 10

Fuse, Generator Harness (KY Spec A), 60

Fuse, Generator Harness (KY Spec B−F), 61Fuse, Generator Harness (KY Spec G−H), 62

Gasket, Air Cleaner, 19, 21, 27

Gasket, Carb Flange, 17

Gasket, Carburetor (KY Spec A−H), 17Gasket, Carburetor Flange, 19, 21

Gasket, Carburetor Flange (KY Spec A−H), 17Gasket, Crankcase, 11

Gasket, Cylinder Head, 8

Gasket, Exhaust (KY Begin Spec B), 36

Gasket, Exhaust (KY Spec A), 35

Gasket, Exhaust Manifold (KYD), 37

Gasket, Exhaust Muffler (KYD), 37

Gasket, Gasoline Air Cleaner Adapter (KY Spec A−H), 17Gasket, Gasoline Intake Manifold (KY Spec A−H), 17Gasket, Gasoline Manifold Insulator (KY Spec A−H), 17

Gasket, Insulator, 19, 21

Gasket, Intake Elbow, 19, 21, 27

Gasket, LP Air Cleaner Adapter (KY Spec A−D), 23Gasket, LP Air Cleaner Adapter (KY Spec E−K and KYD),25

Gasket, LP Carburetor (KY Spec A−D), 23Gasket, LP Carburetor (KY Spec E−K and KYD), 25Gasket, LP Carburetor Flange (KY Spec A−D), 23Gasket, LP Carburetor Flange (KY Spec E−K and KYD), 25Gasket, LP Intake Manifold (KY Spec A−D), 23Gasket, LP Intake Manifold (KY Spec E−K and KYD), 25Gasket, LP Manifold Insulator (KY Spec A−D), 23Gasket, LP Manifold Insulator (KY Spec E−K and KYD), 25Gasket, Oil Base (KY Begin Spec B and KYD), 34

Gasket, Oil Base (KY Spec A), 33

Gasket, Resonator (KY Spec A), 41

Gasket, Service Panel (KY Begin Spec B), 49

Gasket, Valve Cover, 8

Gear, Balancer, 9

Gear, Camshaft, 10

Gear, Crankshaft, 9

Gear, Governor, 10

Gear, Starter (KY Spec A−J), 30Generator (KY Begin Spec B and KYD), 57

Generator (KY Spec A), 55

Gov, Instl Lever, 19, 21

Governor, 13

Governor, Install Lever, 27

Grommet, Enclosure Base (KY Begin Spec B), 43

Grommet, Enclosure Base (KY Spec A), 41

Grommet, Enclosure Base (KYD), 45

Grommet, Enclosure Cover (KY Begin Spec B), 49

Grommet, Enclosure Cover (Spec A), 47

Grommet, KY Housing Rubber, 53

Grommet, Underfloor Mounting Remote (KY), 50

Guide, Push Rod, 8

Hanger, Exhaust (KY), 38

Harness Location, Adapter, 64

Harness Location, Customer Interface Pigtail, 64

Harness Location, Extension, 64

Harness Location, Generator, 64

Harness Location, Remote Panel, 64

Harness, AC Output (KY Begin Spec J and KYD), 59

Harness, AC Output (KY Spec B−H), 58Harness, Adapter (KY Spec F−H and KYD), 66Harness, Adapter (Spec F−H), 66Harness, Customer Interface Pigtail (Spec F−H), 66Harness, Customer Interface Pigtail (KY Spec B−E), 65Harness, Customer Interface Pigtail (Spec B−E), 65Harness, Engine (KY Begin Spec J and KYD), 63

Harness, Extension (KY Spec B−E), 65Harness, Extension (KY Spec F−H and KYD), 66Harness, Generator (KY Spec A), 60

Harness, Generator (KY Spec B−F), 61Harness, Generator (KY Spec G−H), 62Harness, Generator Harness Splitter (KY Spec B−F), 61


Index

5

Harness, Generator Harness Splitter (KY Spec G−H), 62Harness, Remote Panel (Switch Only), 69, 70

Harness, Remote Panel (Switch Only) (KY Begin Spec Fand KYD), 68

Harness, Remote Panel Adapter (KY Spec F−H and KYD),67

Head, Cylinder, 8

Holder Assy, Brush (KY Begin Spec K and KYD), 31

Holder, Governor Spring, 13

Hose, Air Cleaner Preheat (KY Spec J and KYD), 29

Hose, Choke Preheat (KY Begin Spec B), 36

Hose, Choke Preheat (KY Spec A), 35

Hose, Fuel Tank, 40

Hose, Gasoline Fuel (KY Spec A−H), 17Hose, LP Fuel (KY Spec A−D), 23Hose, LP Fuel (KY Spec E−K and KYD), 25Hose, Preheat (KYD), 37

Housing , Choke, 19, 21

Housing, Air (KY Begin Spec B and KYD), 32

Housing, Choke (KY Spec A−H), 17Housing, Scroll (KY Spec A), 55

Housing, Stator (KY Begin Spec B and KYD), 57

Housing, Stator (KY Spec A), 55

Indicator, Oil (KY Begin Spec B and KYD), 34

Indicator, Oil (KY Spec A), 33

Insulation, Cover (KY Begin Spec B and KYD), 49

Insulation, Door (KY Begin Spec B), 49

Insulation, Exhaust (KY Spec A), 41

Insulation, Exhaust Baffle (Spec A), 47

Insulation, Exhaust Barrier (KY Begin Spec B), 43

Insulation, Inlet (KY Spec B−H), 49Insulation, Inlet (Spec A), 47

Insulation, Inlet Baffle (KY Begin Spec B and KYD), 32

Insulator, Carb, 19, 21

Insulator, Carburetor (KY Spec A−H), 17Insulator, Exhaust (KY), 38

Insulator, Gasoline Intake Manifold (KY Spec A−H), 17Insulator, Head, 19, 21

Insulator, LP Carburetor (KY Spec A−D), 23Insulator, LP Carburetor (KY Spec E−K and KYD), 25Insulator, LP Intake Manifold (KY Spec A−D), 23Insulator, LP Intake Manifold (KY Spec E−K and KYD), 25Isolator, Engine Mount (KY Begin Spec B), 43

Isolator, Generator Mount (KY Begin Spec B), 43

Isolator, Generator/Engine Mount (KY Spec A), 41

Isolator, Mount (KYD), 45

Isolator, Muffler (KY Begin Spec B), 36

Isolator, Snubber (KY Begin Spec B), 43

Isolator, Snubber (KY Spec A), 41

Isolator, Snubber (KYD), 45

Key, Camshaft, 10

Key, Crankshaft, 9

Key, Fan Hub (KY Begin Spec B and KYD), 57

Key, Fan Hub (KY Spec A), 55

Kit, Air Filter (KY Begin Spec B and KYD), 32

Kit, Carburetor, 19, 21

Kit, Carburetor Repair (KY Spec A−C), 17Kit, Carburetor Repair (KY Spec A−J), 17Kit, Carburetor Solenoid Repair (KY Spec B−C)), 17Kit, Enclosure Cover, 49

Kit, Exhaust Elbow, 71

Kit, Exhaust Elbow Adapter (KY), 38

Kit, Exhaust Tailpipe (KY), 38

Kit, Exhaust Tube (KY), 38

Kit, Fuel Tank, 40

Kit, Fuel Tank (Obsolete), 40

Kit, Governor Sleeve, 10

Kit, KY Housing, 53

Kit, KY Underfloor Base, 53

Kit, KY Underfloor Housing, 53

Kit, Mounting (Underfloor), 51

Kit, Muffler, 37

Kit, Remote Adapter, 71

Kit, Remote Panel (Switch and Hourmeter), 69

Kit, Remote Panel (Switch and Voltmeter), 70

Kit, Remote Panel (Switch and Voltmeter) (KY Begin Spec Fand KYD), 70

Kit, Remote Panel (Switch Only), 68

Kit, Remote, Panel (Switch Only), 68

Kit, Set Mounting, 71

Kit, Starter Drive (KY Begin Spec K and KYD Begin), 31

Kit, Starter Drive (KY Spec A−J), 30Kit, Tailpipe Hanger, 71

Kit, Underfloor Mounting (KY Begin Spec B)), 50

Kit, Underfloor Mounting (KY), 50

Kit, Underfloor Mounting (KYD), 51

Kits (Misc), 71

Kits, KY Exhaust, 38

KY and KYD Labels, 72

Label, Air Cleaner (KY Begin Spec B and KYD), 32

Label, Charger (KY Begin Spec B), 49

Latch Assy, Service Panel (KY Begin Spec B), 49

Latch, Service Panel (Spec A), 47

Lever, Governor, 13

Lever, Governor Control, 13

Line, LP Fuel Inlet (KY Spec A−D), 23Line, LP Fuel Inlet (KY Spec E−K and KYD), 25Linkage, Choke, 19, 21

Linkage, Choke (KY Spec A−H), 17Locations, Harness, 64

Lock, Valve Spring, 8

Magneto (KY Begin Spec B and KYD), 29

Magneto (KY Spec A), 28

Manifold, Exhaust (KY Begin Spec B), 36

Manifold, Gasoline Intake (KY Spec A−H), 17Manifold, LP Intake (KY Spec A−D), 23Manifold, LP Intake (KY Spec E−K and KYD), 25Meter, Hour (Begin Spec F), 69

Meter, Volt (Begin Spec F), 70

Mixer, 27

Mount, Generator, 51


Index

6

Muffler (KY Begin Spec B), 36

Muffler (KY Spec A), 35

Muffler (KYD), 37

Nipple, Fuel Valve (KY Spec A−D), 23Nipple, Fuel Valve (KY Spec E−K and KYD), 25

O’Ring, Oil Fill Tube (KY Spec A), 33

O’Ring, Oil Indicator (KY Begin Spec B and KYD), 34

O’Ring, Oil Indicator (KY Spec A), 33

O’Ring, Rotor (KY Begin Spec B and KYD), 57

O’Ring, Rotor (KY Spec A), 55

Paint, 71

Paint, Enamel Green, 71

Panel, Control (KY Begin Spec J and KYD), 59

Panel, Control (KY Spec A), 55

Panel, Control (KY Spec B−H), 58Panel, KY Housing, 53

Panel, Remote, 68, 69

Panel, Remote (KY Begin Spec F and KYD), 70

Panel, Remote Switch and Hourmeter, 69

Panel, Remote Switch and Voltmeter (KY Begin Spec F andKYD), 70

Panel, Remote Switch only, 68

Panel, Service (KY Begin Spec B), 49

Panel, Service (Spec A), 47

Panel, Under Floor (KYD), 51

Panel, Underfloor Mounting (KY), 50

Pawl, Latch, 47

PCB, Control (KYD), 45

Pin, Cylinder Head Hollow Dowel, 8

Pin, Decompression, 10

Pin, Endbell Roll (KY Spec A), 28

Pin, Parallel, 11

Pin, Piston, 9

Pin, Starter Spiral Roll (KY Spec A−J), 30Pipe, Exhaust (KYD), 37

Piston, 9

Pivot, Speed Adjusting, 13

Plate, Oil Level, 11

Plate, Oil Shield, 9

Plug, Drain (KY Begin Spec B and KYD), 34

Plug, Drain (KY Spec A), 33

Plug, Hole (KY Spec A), 55

Plug, Hole (KY Spec B−H), 58Plug, Spark, 8

Potentiometer (KY Begin Spec J and KYD), 59

Potentiometer (KY Spec A), 55

Potentiometer (KY Spec B−H), 58Pump, Fuel (Electric), 19

Pump, Fuel (KY Spec A−H), 17

Rail, KY Underfloor Mounting Bottom, 52

Rail, Mounting (KYD), 51

Rail, Underfloor Mounting (KY), 50

Rectifier, Generator Harness Bridge (KY Spec A), 60

Regulator, Fuel, 27

Regulator, LP (KY Spec A−D), 23Regulator, LP (KY Spec E−K and KYD), 25Regulator, Voltage (KY Spec A), 28

Regulator, Voltage (KY Spec B−H), 43Relay, Start Solenoid (KY Spec A), 41

Relay, Start Solenoid (KY Spec B−H), 43Relay, Start Solenoid (KYD), 45

Resistor, Generator Harness (KY Spec A), 60

Resistor, Generator Harness (KY Spec B−F), 61Resistor, Generator Harness (KY Spec G−H), 62Resonator, Exhaust (KY), 38

Resonator, Intake (KY Begin Spec B and KYD), 32

Retainer, Starter Clutch (KY Spec A−J), 30Retainer, Starter Ring (KY Begin Spec K and KYD), 31

Retainer, Starter Spring (KY Spec A−J), 30Retainer, Valve Spring, 8

Ring Set, Piston, 9

Ring, Collector (KY Begin Spec B and KYD), 57

Ring, Collector (KY Spec A), 55

Rings, Valve Guide, 8

Rod, Air Inlet (KY Spec A), 28

Rod, Connecting, 9

Rod, Governor, 19, 21

Rod, Governor, 13

Rod, Push, 8

Rotor Assy, Generator (KY Begin Spec B and KYD), 57

Rotor Assy, Generator (KY Spec A), 55

Seal, Air (KY Begin Spec B and KYD), 32

Seal, Air Cleaner Spacer, 19, 21, 27

Seal, Air cleaner Spacer (KY Spec E−K and KYD), 25Seal, Air Filter Foam (KY Begin Spec B and KYD), 32

Seal, Barrier Edge (KY Begin Spec B), 43

Seal, Crankshaft Oil, 9

Seal, Cylinder Block Oil, 13

Seal, Endbell (KY Spec A), 28

Seal, Valve Stem, 8

Shaft, Balancer, 11

Shaft, Flyweight, 10

Shaft, Governor Lever, 13

Shield, Carburetor (KY Begin Spec J and KYD), 59

Shield, Carburetor (KY Spec A), 55

Shield, Carburetor (KY Spec B−H), 58Shield, Control (KY Spec A), 55

Shield, Exhaust Insulation (KYD), 45

Shield, Heat (KY Spec A), 41

Shim, Balancer, 11

Shim, Breather Valve, 8

Shim, Camshaft, 10

Shim, Crankshaft, 9

Sleeve, Governor, 10

Solenoid, Gasoline Fuel Cut (KY Begin Spec B−C), 17Solenoid, Start (KY Begin Spec B), 43

Spacer, Muffler (Isolator KYD), 37

Spline, Starter, 30

Spring, Decompression, 10

Spring, Generator Brush, 29


Index

7

Spring, Generator Brush (KY Spec A), 28

Spring, Governor Rod, 19, 21

Spring, Governor, 13, 19, 21

Spring, Governor Adjusting Screw, 13

Spring, Governor Rod, 13

Spring, Starter Pinion (KY Spec A−J), 30Spring, Valve, 8, 21

Starter, 29

Starter (KY Spec A), 55

Stator, Generator (KY Begin Spec B and KYD), 57

Stator, Generator (KY Spec A), 55

Stiffener, Bracket (KY Spec A−D), 23Stiffener, Bracket (KY Spec E−K and KYD), 25Strap, Bond (KY Begin Spec B and KYD), 32

Strap, Bond (KY Spec A), 28

Stud, Exhaust (KY Begin Spec B), 36

Stud, Exhaust (KY Spec A), 35

Stud, Exhaust (KYD), 37

Switch, Oil Level (KY Spec A), 33

Switch, Oil Level (KY Spec B−F ), 34Switch, Remote Panel Start/Stop (KY Begin Spec F andKYD), 68

Switch, Remote Panel Start/Stop Switch and Hourmeter(Begin Spec F), 69

Switch, Remote Panel Start/Stop Switch and Voltmeter (KYBegin Spec F and KYD), 70

Switch, Start/Stop (Generator Harness) (KY Spec A), 60

Switch, Start/Stop (KY Begin Spec J and KYD), 59

Switch, Start/Stop (KY Spec B−H), 58

Tank, Fuel, 40

Tappet, 10

Terminal, Spark Plug, 29

Terminal, Spark Plug (KY Spec B−H), 58Transformer, Voltage (KY Begin Spec B and KYD), 57

Transformer, Voltage (KY Begin Spec J and KYD), 59

Tube, Breather, 8, 19, 21, 27

Tube, Exhaust (KY), 38

Tube, Oil Fill (KY Spec A), 33

Tube, Spacer (KY Begin Spec B), 43

Valve Assy, Fuel (KY Spec A−D), 23Valve Assy, Fuel (KY Spec E−K and KYD), 25Valve, Breather, 8

Valve, Fuel Tank Shutoff, 40

Valve, Intake/Exhaust, 8

Wheel Assy, Blower (KY Begin Spec B and KYD), 57

Wheel Assy, Blower (KY Spec A), 55

Wrapper, Air Cylinder, 15


KY/ KYD8

Cylinder Head

2

3

46

5

12

13 15

16

9

8

7

17

11

10

1

5

9

8

7

18

19

20

2122

22

23

24

25

27

28

14

REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION

100−3486−01 1 Engine1 Valve

110−3887 1 Intake110−3888 1 Exhaust

2 110−3893 1 Gasket, Cylinder Head3 110−3890 1 Head, Cylinder (Includes

Guides, Seats and ValveGuide Rings)

110−3580 2 Rings, Valve Guide4 Plug, Spark

167−0275 1 60Hz167−0305 1 50Hz

5 740−1008 2 Washer, Flat (M10)6 110−3750 2 Bolt, Cylinder Head

(M10 x 1.25 x 66mm)7 110−3698 2 Washer, Valve Spring8 110−3701 2 Spring, Valve9 110−3700 2 Retainer, Valve Spring

10 110−3914 2 Lock, Valve Spring11 509−0289 1 Seal, Valve Stem12 110−3750−03 2 Bolt, Flange

(M10 x 1.5 x 115mm)

13 123−1920 1 Valve, Breather14 Shim, Breather Valve

110−3922−01 1 .010110−3922−02 1 .020

15 110−3751−00 1 Bolt, Cylinder Head(M8 x 1.25 x 85mm)

16 110−3751−01 1 Bolt, Cylinder Head(M8 x 1.25 x 48mm)

17 110−3892 2 Pin, Hollow Dowel18 110−3743 1 Cover, Valve19 110−3861 1 Gasket, Valve Cover20 800−3026 7 Screw, Hex Flange Head

(M6 x 1 x 25mm)21 123−1917 1 Tube, Breather22 503−1851 2 Clamp, Hose23 115−0465 2 Arm, Rocker24 185−7144 2 Nut, Rocker Arm Adjusting25 115−0496 2 Nut, Lock Adjusting26 115−0471 2 Rod, Push27 115−0472 1 Guide, Push Rod28 115−0497 2 Stud, Rocker Arm


KY/ KYD9

Crankshaft

1

2

3

4

11

10

76

9 8

12

5

13

1415

16

4


1 Piston (Includes Pin & Clip)112−0291 1 Standard 185−6828 1 0.25 Oversize185−6826 1 0.50 Oversize

2 Ring Set, Piston113−0353 1 Standard185−6829 1 0.25 Oversize185−6827 1 0.50 Oversize

3 112−0290 1 Pin, Piston4 112−0255 2 Clip, Piston Pin5 510−0160 1 Bearing, Block End6 104−1901 1 Gear, Crankshaft7 104−1899 1 Gear, Balancer8 104−1780 1 Crankshaft9 515−0293 1 Key, Woodruff

10 510−0161 1 Bearing, Gearcase End11 509−0258 1 Seal, Oil

12 Shim (Use As Required)104−1721−01 3 0.20mm104−1721−02 3 0.30mm104−1721−03 3 0.40mm104−1721−05 3 0.50mm104−1721−07 3 0.60mm104−1721−08 3 0.70mm

13 Rod Assy, Connecting(Includes Bolt)

114−0373 1 Standard No Replacement 1 0.25 Undersize No Replacement 1 0.50 Undersize14 114−0367 2 Bolt, Connecting Rod15 120−1264 1 Plate, Oil Shield16 114−0366 1 Dipper, Oil


KY/ KYD10

Camshaft

1

2

4

6

7

8

910

11

12

13

1415

16

17

6

8

11

39

&

5

4

9

&5

18

19


1 115−0463 2 Tappet2 105−0682 1 Camshaft Assy (Spec A−D)

(Includes Parts Marked +)3 105−0724 1 Camshaft (Begin Spec E)

(Includes Parts Marked °)4 105−0681 1 +Gear Assy, Camshaft

(Spec A−D) (IncludesFlyweight, Flyweight Shaftand Pin)

5 105−0731 1 °Gear, Camshaft (Begin Spec E)6 150−2464 1 Flyweight7 150−2302 1 Shaft, Flyweight8 150−2305 1 Pin, Decompression Spring9 515−0305 1 °+Key, Woodruff

10 150−2465 1 +Pin, Decompression11 150−2466 1 +Spring, Decompression12 150−2604 1 Gear, Governor13 526−2077 1 *Washer, Flat14 526−2078 1 *Washer, Flat

15 541−0508 1 Sleeve Kit, Governor (IncludesWashers Marked *, GovernorStop, Governor Sleeve andGovernor Shaft)

16 510−0163 1 Bearing, Ball17 Shim (Use As Required)

104−1896−01 3 .50mm104−1896−02 3 .60mm104−1896−03 3 .70mm104−1896−04 3 .80mm104−1896−05 3 .90mm104−1896−06 3 1.00mm104−1896−07 3 1.20mm

18 115−0471 2 Rod, Push19 510−0161 1 Seal, Oil

+ − Parts Included in Camshaft Assy (Spec A−D)° − Parts Included in Camshaft Assy (Begin Spec E)* − Washers Included in Governor Sleeve Kit.


KY/ KYD11

Crankcase Cover

89

7

1

2

3

65

4

10


1 101−0787 1 Cover, Crankcase2 815−0781 9 Bolt, Crankcase Cover

(M8 x 1.25 x 30mm)3 101−0788 1 Gasket, Crankcase4 102−1421 2 Screw, Hex Head Cap

(Spec A−F)5 102−1419 1 Plate, Oil Level

(Spec A−F)6 775−0074 2 Pin, Parallel7 104−1792 1 Shaft, Balancer (Includes Shaft

and Gear)

8 510−0163 1 Bearing, Ball9 Shim, Balancer (Use as

Required)104−1896−01 3 0.50mm104−1896−02 3 0.60mm104−1896−03 3 0.70mm104−1896−04 3 0.80mm104−1896−05 3 0.90mm104−1896−06 3 1.00mm104−1896−07 3 1.20mm

10 510−0161 1 Seal, Oil


KY/ KYD12 Redistribution or publication of this documentby any means, is strictly prohibited.

KY/ KYD13

Governor

1

10

20

11

1213

14

15

16

17

18

19

2

3

4

5 67

8

9

8


1 150−2393 1 Lever, Governor2 150−2396 1 Holder, Governor Spring3 870−0465 1 Nut, Square (M8 x 1.25mm)4 526−0122 1 Washer, Flat (5/16”)5 718−1039 1 Screw, Hex Head Cap

(M8 x 1.25 x 35mm)6 518−0617 1 Clip, Retainer7 740−1002 1 Washer, Flat (M5)8 150−2394 2 Spring, Adjusting Screw9 150−2395 1 Screw, Special

10 150−2391 1 Spring, Governor Rod

11 150−2392 1 Rod, Governor12 518−0576 2 Clip, Retainer13 150−2401 1 Shaft, Governor Lever14 150−2448 1 Seal, Oil15 150−2390 1 Spring, Governor16 870−2159 1 Nut, Flanged (M8 x 1.25)17 150−2398 1 Pivot, Speed Adjusting18 150−2549−02 1 Lever, Governor Control19 150−2514 1 Screw, Governor Adjust20 520−2215 1 Stud, Control Lever Mounting


KY/ KYD14

“Blank Page”


KY/ KYD15

Air Cylinder

1

3

2

2

REF PART QTY PARTNO. NO. USED DESCRIPTION

1 134−4919−01 1 Cover, Air Cylinder2 Screw, Torx Pan Head

Thread Forming (M6 x 1 x 12mm)823−0003−06 5 Gasoline823−0003−06 2 LP

3 134−5119 1 Wrapper, Air Cylinder


KY/ KYD16

CarburetorGasoline (KY Spec A−H)

3

4

5

67

22

21

17

18

19

28

26

30

31

27

25

24

23

32

26

20

8

9

1011

1213

14

1516

1

2

29

33


KY/ KYD17

CarburetorGasoline (KY Spec A−H)


1 146−0530 1 Insulator2 154−2821 2 Gasket, Intake Manifold3 154−2815 1 Manifold, Intake4 146−0531 1 �Gasket, Manifold Insulator5 146−0532 1 +Insulator6 146−0533 1 �Gasket, Carburetor7 ◊Carburetor

146−0759 1 Spec A146−0743 1 Spec B−C Obsolete146−0742 1 Spec D−H, Spec J thru S/N

F1205998 153−0639 1 Linkage, Choke9 232−3720 1 Bearing, Flange

10 153−0638−01 1 Housing, Choke11 153−0659 1 Cover, Choke Element12 517−0305 1 Cap, Dome13 153−0640 1 Element, Choke Thermostat14 Cover, Choke

153−0637−01 1 Spec A153−0651−02 1 Spec B−H

15 526−0003 1 Washer, Flat (3/16”)16 860−2005 1 Nut, Hex (M4 x .7mm)17 Adapter, Air Cleaner

145−0687−02 1 Spec B, C145−0705−02 1 ~ Spec D−H

18 740−1004 2 Washer, Flat (M6)19 800−2046 2 Screw, Hex Head Cap

(M6 x 1 x 80mm)20 Gasket, Carburetor Flange

145−0617 1 * Spec A145−0695 1 ~ Spec B−H

21 145−0625 1 Adapter, Air Cleaner (Spec A)Obsolete

22 Gasket, Air Cleaner Adapter140−2586 1 *^ Spec A−D140−2771−01 1 +~ Spec E−H

23 149−2457 1 Filter, Fuel24 149−2311−01 1 Pump, Fuel (Electric) (E2)

(Spade Terminal)25 823−1002−03 1 Screw, Pan Head Torx

(M6 x 1 x 10mm)26 503−1951−09 2 Clamp, Hose (.47”)27 1 Hose, Fuel

503−1759 1 Spec A (460mm)503−2735 1 Spec B−J (546mm)

28 146−0615 1 Solenoid, Fuel Cutoff (SpecB−C Non Emissions Only)

(E3)(Not ReplaceableSpec D−J)

29 898−1314−05 1 Sleeving, Convoluted30 870−2159 2 Nut, Flanged (M8 x 1.25mm)31 154−2818 2 Stud

32 Kits (Parts Without PartNumbers are Not SoldSeparately)

146−0646 1 Solenoid (Spec B, C) (For use with Carburetor146−0614 (IncludesSolenoid Valve Assy,Gaskets and Solenoid

Holder)146−0758 1 Carburetor (Spec B−H, J thru

S/N F120599) (For use withCarburetor 146−0741)(Includes Gaskets Marked ,Parts Marked +, Float, FloatPin, Float Valve andGaskets)

146−0651 1 Carburetor (Spec A−C) (For use with Carburetors146−0534 and 146−0614)(Includes Gaskets Marked �,Parts Marked ^, Float,Gaskets, Float Valve, FloatPin and Main Limiter Cap)

146−0759 1 Spec A (Includes GasketsMarked �, Parts Marked *and Carburetor 146−0534)

Spec B−C146−0743 1 Emissions Conversion Kit

(Includes GasketsMarked � and PartsMarked ~)(Converts to EmissionsCarburetor 146−0741introduced for Spec D)

146−0742 1 Spec D−H, Spec J thru S/NF120599 (Includes GasketsMarked) (Uses EmissionsCarburetor 146−0741)Obsolete

33 145−0695 1 Gasket, Carb Flange

� − Gaskets Included with Carburetors and Repair Kits.◊ − Carburetor Part Numbers are embossed on the

Carburetor.* − Parts Included with Carburetor (Spec A)~ − Parts Included with Emissions Carburetor Conversion Kit

(Spec B−C)^ − Parts Included with Carburetor Repair Kit (Spec A−C)+ − Parts Included in Carburetor Repair Kit (Begin Spec B and

During Spec J)⊃ − Parts Included with Carburetor (During Spec J)


KY/ KYD18

Carburetor, Gasoline (KY Begin Spec J and KYD)

21

20

19

18

17

1016

9

8

1112

13

15

1

2

3

45

6

7

12

14

4

22

23

2425

25

26

27

38

37

36 35

34

33

32

31

30

29

28


KY/ KYD19

Carburetor, Gasoline(KY Begin Spec J and KYD)


1 − 1 Gov, Instl Lever(See Governor page)

2 134−4919−01 1 Cover, Cylinder Air3 870−2159 2 Nut, Locking Flange4 154−2821 2 Gasket, Intake Elbow5 146−0530 1 Insulator, Head6 − 1 Rod, Govenor

(See Governor page)7 − 1 Spring, Govenor Rod

(See Governor page)8 134−5119 1 Assy, Cylinder Air Wrap9 815−0578 3 Screw, Pan Head Torx Thread

Form (M6 x 1 x 12mm)10 − 1 Spring, Governor

(See Governor page)11 123−1917 1 Tube, Breather12 503−1851 2 Clamp, Hose13 153−0638−01 1 Housing , Choke14 526−0003 1 Washer, Flat (3−16”)15 860−2005 1 Nut, Hex (M4)16 153−0651−02 1 Cover, Choke17 232−3720 1 Bearing, Flange18 153−0640 1 Element, Thermostat19 153−0659 1 Cover, Choke Element

20 153−0639 1 Linkage, Choke21 517−0305 1 Cap, Dome22 898−1314−05 1 Sleeving, Convoluted23 149−2457 1 Filter, Fuel24 503−2735 1 Hose, Fuel25 503−1951−10 2 Clamp, Hose26 823−1002−03 2 Screw, Pan Head Machine27 149−2311−02 1 Pump, Fuel (Electric)28 146−0533 1 Gasket, Carburetor 29 Kit, Carburetor

146−0742 1 Spec J Obsolete146−0785 1 Spec K

30 146−0532 1 Insulator, Carb31 140−2771−01 1 Gasket, Air Cleaner32 146−0531 1 Gasket, Insulator33 154−2815 1 Elbow, Intake34 145−0705−02 1 Adapter, Carb35 145−0695 1 Gasket, Carburetor Flange36 740−1004 2 Washer, Flat37 800−2046 2 Screw, Hex Head Cap

(M6 x 1 x 80mm)38 140−2536−06 1 Seal, Air Cleaner Spacer


KY/ KYD20

Carburetor, Gasoline EVAP (KY Begin Spec K)

21

20

19

18

17

10 16

9

8

1112 13

15

1

2

3

45

6

7

12

14

4

22 23

24

25

26

27

38

37

36 35

34

33

32

31

30

29

28

9


KY/ KYD21

Carburetor, Gasoline EVAP(KY Begin Spec K)


154−2838−34 1 Assy, Carburetor (IncludesParts Marked *)

1 − 1 Gov, Instl Lever(See Governor page)

2 134−4919−01 1 Cover, Cylinder Air3 870−2159 2 Nut, Locking Flange4 154−2821 2 Gasket, Intake Elbow5 146−0530 1 Insulator, Head6 − 1 Rod, Govenor (150−2392

See Governor page)7 − 1 Spring, Govenor Rod

(150−2391 See Governorpage)

8 134−5119 1 Assy, Cylinder Air Wrap9 815−0578 5 Screw, Pan Head Torx Thread

Form (M6 x 1 x 12mm)10 − 1 Spring, Governor (150−2390

(See Governor page)11 123−1917 1 Tube, Breather12 503−1851 2 Clamp, Hose13 153−0638−01 1 Housing , Choke14 526−0003 1 Washer, Flat (3−16”)15 860−2005 1 Nut, Hex (M4)16 153−0651−02 1 Cover, Choke

17 232−3720 1 Bearing, Flange18 153−0640 1 Element, Thermostat19 153−0659 1 Cover, Choke Element20 153−0639 1 Linkage, Choke21 517−0305 1 Cap, Dome22 110−3972 1 Spring, Valve23 148−1341−02 1 Bracket, Fuel24 43−0229−02 1 Tubing25 503−2879 1 Hose, Fuel26 503−2878 1 Hose, Fuel27 503−2877 1 Hose, Fuel28 146−0533 1 *Gasket, Carburetor 29 146−0785 1 *Kit, Carburetor30 146−0532 1 *Insulator, Carb31 140−2771−01 1 *Gasket, Air Cleaner32 146−0531 1 *Gasket, Insulator33 154−2815 1 *Elbow, Intake34 145−0705−02 1 *Adapter, Carb35 145−0695 1 *Gasket, Carburetor Flange36 740−1004 2 *Washer, Flat37 800−2046 2 *Screw, Hex Head Cap

(M6 x 1 x 80mm)38 140−2536−06 1 *Seal, Air Cleaner Spacer


KY/ KYD22

CarburetorLP (KY Spec A−D)

3

4

5

6

7

8

12

16

17

14

10

21

22

28

10

19

22

29

3031

3233

35

36

37

13

20

15

24

26

27

23

18

1

2

11

10

9

25

38

34

19


KY/ KYD23

CarburetorLP (KY Spec A−D)


1 146−0530 1 Insulator, Head2 154−2821 2 Gasket, Intake Manifold3 154−2815 1 Manifold, Intake4 154−2818 2 Stud5 870−2159 2 Nut, Flanged (M8 x 1.25mm)6 146−0531 1 Gasket, Manifold Insulator7 146−0532 1 Insulator8 146−0533 1 Gasket, Carburetor9 503−2006 1 Hose, Fuel (5.63” Lg)

(.375 ID x .75 OD)10 503−2094 3 Clamp, Hose11 503−1418 1 Hose, Fuel12 146−0602 1 Carburetor13 140−2586 1 Gasket, Air Cleaner Adapter14 145−0625 1 Adapter, Air Cleaner (Spec A)

Obsolete15 Gasket, Carburetor Flange

145−0617 1 Spec A145−0695 1 Begin Spec B

16 800−2046 2 Screw, Hex Head Cap(M6 x 1 x 80mm)

17 740−1004 2 Washer, Flat (M6)18 145−0687−02 1 Adapter, Air Cleaner

(Spec B−D)19 503−2015 2 Hose, Fuel (40”)

(.38 ID x .69 OD)20 502−0395 1 Connector, Hose

(1/8 NPT x 1/4” ID) (BeginningSpec E, Hose ConnectorSupplied with Regulator)

21 148−0987 1 Regulator (K2)(Includes InletFitting)

22 503−1851 3 Clamp, Hose23 307−2831−02 1 Stiffener, Bracket24 823−0003−06 1 Screw, Torx Pan Head

Thread Forming(M6 x 12mm)

25 821−0005 1 Screw, Lock Head Flange(10−32 x 1/2”)

26 148−0985−02 1 Bracket, Regulator27 821−0004 1 Screw, Flange Lock Hex

(#10−32 x 5/16”)28 502−1162 1 Fitting, Barbed Hose29 Valve Assy, Fuel (E3)

307−2501 1 LP Liquid sets307−2961 1 LP Vapor sets

30 502−0047 1 Nipple, Close31 502−1133 1 Coupling, Anchor32 149−2523−01 1 Line, Inlet Fuel (KY Begin

Spec B)(75 LG x 1/4−18 NPT)33 502−1214 1 Connector, Female

(1/4−18 NPT) (KY Begin Spec B and Spec 11276A)

34 502−1200 1 Fitting, Barbed Hose (Spec AExcept Spec 11276A)

35 Nipple502−1201 1 KY Spec A (Except 11276A)505−0071 1 KY Spec 11276A

36 Bracket, Solenoid307−2795−02 1 KY Spec A307−2824−02 1 KY Begin Spec B Obsolete

37 823−1002−03 1 Screw, Torx Pan Head(M6 x 1 x 10mm)

38 856−0006 2 Washer, EIT Lock Torx (M6)


KY/ KYD24

CarburetorLP (KY Spec E−K and KYD Spec A)

36

35

34

33

32

3130

2928

27

26

25

24

23

22

21

20

19

18

17

16

15

13

1211

10

9

8

7

6

5

4

3

21

10

10

19

14

37

38


KY/ KYD25

CarburetorLP (KY Spec E−K and KYD)


146−0722 1 Kit,Carburetor (IncludesParts Marked +)

1 146−0530 1 Insulator, Head2 154−2821 2 Gasket, Intake Manifold3 154−2815−02 1 *Manifold, Intake4 154−2818 2 Stud5 870−2159 2 Nut, Flanged (M8 x 1.25mm)6 146−0531 1 *+Gasket, Manifold Insulator7 146−0532 1 *Insulator8 146−0533 1 *+Gasket, Carburetor9 503−2006 1 *Hose, Fuel (5.63” Lg)

(.375 ID x .75 OD)10 503−1851 3 *Clamp, Hose11 146−0668 1 *+Carburetor12 140−2771−01 1 *+Gasket, Air Cleaner Adapter13 145−0695 1 *Gasket, Carburetor Flange

(KY Begin Spec B and KYD)14 104−2536−06 1 *Seal, Air cleaner Spacer15 800−2046 2 *Screw, Hex Head Cap

(M6 x 1 x 80mm)16 740−1004 2 *Washer, Flat (M6)17 145−0705−02 1 *Adapter, Air Cleaner18 503−2015 1 *Hose, Fuel (40”)

(.38 ID x .69 OD)19 503−1851 2 Clamp, Hose20 148−1013 1 *Regulator (K2)21 307−2831−02 1 Stiffener, Bracket22 823−0003−06 1 Screw, Torx Pan Head

Thread Forming(M6 x 12mm)

23 821−0005 1 Screw, Lock Head Flange(10−32 x 1/2”)

24 148−0985−02 1 Bracket, Regulator25 821−0004 1 Screw, Flange Lock Hex

(#10−32 x 5/16”)26 502−1162 1 Fitting, Barbed Hose27 307−2961 1 Valve, Fuel (Shut Off)28 502−0047 1 Nipple, Close29 502−1133 1 Coupling, Anchor30 149−2523−01 1 Line, Inlet Fuel (Begin Spec B)

(75 LG x 1/4−18 NPT)31 502−1214 1 Connector, Female

(1/4−18 NPT) (Begin Spec Band Spec 11276A)

32 505−0071 Nipple33 307−2997−02 1 Bracket, Solenoid34 823−1002−03 1 Screw, Torx Pan Head

(M6 x 1 x 10mm)35 856−0006 2 Washer, EIT Lock Torx (M6)36 154−2838−12 1 Carb Assy. (Includes

Parts Marked*)37 503−2015 1 Hose, LP Fuel38 898−1196−24 1 Sleeving, Convoluted

* − Parts Included in Carburetor Assy.


KY/ KYD26

CarburetorLP (KY Begin Spec L and KYD Spec B)

31

1616

15

30

30

29

14

13

13

28

29

28

27

26

2524

23

17

12

10

10

9

11

8

7

6

5

5

44

3

2

19

18

2122

1

20

32


KY/ KYD27

CarburetorLP (KY Begin Spec L and KYD Begin Spec B)


1 − 1 Governor, Install Lever(See Governor page)

2 134−4919−01 1 Cover, Cylinder Air3 154−2815−01 1 Elbow, Intake4 870−2159 2 Nut, Locking Flange (M8 x 1.25)5 154−2821 2 Gasket, Intake Elbow6 − 1 Insulator, Head

(See Governor page)7 − 1 Rod, Governor

(See Governor page)8 150−2391 1 Spring, Governor Rod9 134−5119 1 Assy Cylinder, Air Wrap

10 823−0003−06 3 Screw,Pan Head TorxThread Form(M6 x1x12mm)

11 − 1 Spring, Governor(See Governor page)

12 123−1977 1 Tube, Breather13 503−1851 1 Clamp, Hose14 148−1264−02 1 Bracket, Fuel Regulator15 148−1265−02 1 Bracket, Fuel Regulator16 823−0003−02 6 Screw,Pan Head Torx

Thread Form(M6 x1x14mm)

17 148−1266 1 Regulator, Fuel18 821−0018 2 Screw, Locking Head

(1/4−20UNC x 5/8”)19 503−2143−05 1 Hose, Vapor LPG20 140−2536−06 1 Seal, Air Cleaner Spacer21 146−0531 1 Gasket, Insulator22 146−0532 1 Insulator, Carbr23 146−0533 1 Gasket, Carborator24 146−0829 1 Mixer25 140−2771−01 1 Gasket, Air Cleaner26 145−0705−02 1 Adapter, Carb 27 145−0695 1 Gasket, Carb Flange28 740−1004 2 Washer, Flat (M6)29 800−2046 2 Screw, Hex Head Cap

(M6 x 1 x 80mm)30 503−2309 2 Clamp, Hose31 503−2289−06 1 Hose, Vent32 800−2027 1 Screw, Hex Head Cap

(M6 x 1 x 10mm)


KY/ KYD28

Endbell(KY Spec A)

,

1

3

10

12

13

11

16

14

15

4 17

22

20 21

2

6

9

8

75

19

18

4


1 211−0437 1 Endbell, Obsolete2 516−0151 1 Pin, Roll3 509−0274−02 1 Seal, Endbell4 823−0002−04 4 Screw, Pan Head Torx

(M4 x .7 x 12mm)5 526−0003 2 Washer, Flat (#8)6 212−1283 1 Block Assy, Brush (Includes

Brush, Spring and Block)7 212−1282 1 Block, Brush8 212−1276−03 2 Spring, Generator Brush9 214−0103 2 Brush, Generator

10 140−2609 1 Element, Air Cleaner11 153−0641 1 Element, Thermostat Preheat12 145−0561 1 Cover, Air Filter Thermostat13 145−0615 1 Rod, Air Inlet

14 526−0018 1 Washer, Flat (1/4)15 800−0017 1 Screw, Hex Head Cap

(1/4−20 x 3−1/2”)16 140−2576 1 Cover, Air Cleaner17 160−1358 1 Magneto18 823−0003−04 1 Screw, Torx Pan Head

(M6 x 1 x 25mm)19 Regulator, Voltage (VR1)

305−0851 1 60 Hz305−0866 1 50 Hz

20 823−0007−01 1 Screw, Pan Head(M8 x 1.25 x 20mm)

21 337−2560 1 Strap, Bond22 856−0008 1 Washer, EIT Lock (5/16”)


KY/ KYD29

Endbell(KY Begin Spec B and KYD)

13

15

4

10

11

8

34

9

12

20

17

18

1916

1

5

2

6 7,

6

7

14

21


1 Endbell211−0460 1 KY Spec B−H211−0497−00 1 Gasoline (KY Begin Spec J

and KYD)(Includes PartsMarked *)

211−0497−01 1 LP (KY Begin Spec J and KYD)(Includes PartsMarked *)

2 800−6296−01 4 Screw, Pan Head Torx ThreadForming (M6 x 25mm)

3 160−1358 1 +Magneto (G2) (KY Spec B−Hand KYD)

4 823−0002−09 2 Screw, Pan Head Torx(M4 x .7 x 16mm)

5 166−0866 1 Coil Ignition (KY Begin Spec Jand KYD, Includes Boot andTerminal)

6 167−0267 1 Terminal, Spark Plug7 167−1627 1 Boot, Spark Plug8 526−0003 2 *Washer, Flat (3/16”)9 212−1283 1 *Block Assy, Brush (Includes

Brush, Spring and Block)10 214−0103 2 *Brush, Generator11 212−1276−03 2 *Spring, Generator Brush

12 212−1283 1 *Block, Brush13 503−1351 1 +Hose, Preheat (Gasoline Units)

(KY Spec B−H and Part of J)14 517−0103 1 Plug (LP Units)15 509−0313 1 +O’Ring (Gasoline Units)

(KY Spec B−H and Part of J)16 Cable, Starter

226−4297 1 KY Spec B−H226−4795 1 KY Begin Spec J and KYD

17 815−0781 2 Screw, Hex Washer Head Cap(M8 x 1.25 x 30mm)

18 Starter (See Separate Page forComponents)

191−1798 1 KY Spec B−J191−2351 1 KY Begin Spec K and

KYD19 862−0001 1 Nut, Hex20 850−0040 1 Washer, Lock−Spring (1/4”)21 823−0003−04 2 Screw, Pan Head

* − Parts Included with Endbell Beginning Spec J.+ − Eliminated During Spec J.


KY/ KYD30

Starter Components (KY Spec A−J)

15

2

3

4

8

9 10

6

11

7

12


191−1798 1 Starter (B1)1 191−1867 1 Cap Assy, End (Includes

Brushes)2 191−2155 1 Armature3 191−2156 1 Cap Assy, Drive (Includes

Bushing)4 191−2157 1 Kit, Drive (Includes Parts

Marked *)5 191−1821 1 *Retainer, Spring6 191−1870 1 *Spring, Pinion

7 191−1869 1 *Pin, Spiral Roll8 191−1863 1 *Cover, Spring9 191−1864 1 *Retainer, Clutch

10 191−1865 1 *Washer11 191−1868 1 *Gear, Starter12 191−1866 1 *Clutch and Spline

* − Parts Included in Drive Kit.


KY/ KYD31

Starter Components(KY Begin Spec K and KYD)

54

3

2

6

1


191−2351 1 Starter, Complete (B1)1 191−2320 1 Retainer, Ring2 191−2156 1 Cap Assy, Drive (Includes

Bushing)3 191−2321 1 Armature4 191−2317 1 Cap Assy, End (Includes

Bushing)

5 191−2316 1 Holder Assy, Brush (IncludesBrushes)

6 191−2313 1 Kit, Drive (Includes RingRetainer, Retainer Spacer,Wave Washer, Spring, StarterGear, and Clutch/Spline)


KY/ KYD32

Air Housing (KY Begin Spec B and KYD)

8

9

10

11

16

1718 5

1414

3

2

7

19

6

20

21

13

12

13


140−3295 1 Kit, Air Filter (Includes PartsMarked *)

1 134−5213 Housing, Air2 140−2854 1 Door, Preheat (Gasoline Units)3 509−0308 1 Seal, Air (Right)4 509−0305 1 Seal, Air (Left)5 526−0115 1 Washer, Flat (5/16”)6 823−0009−01 4 Screw, Torx Pan Head

Thread Forming(M6 x 1 x 20mm)

7 134−5031 1 Resonator, Intake8 134−5032 1 Cover, Resonator9 815−0838−02 4 Screw, Torx Pan Head

Thread Forming10 526−0012 4 Washer, Flat

(5.551D x 19.050 x 8)11 405−4896 1 Insulation, Inlet Baffle

12 140−2820−01 1 Cover, Air Cleaner13 865−0029 2 Nut, Wing14 140−3280 1 *Element, Air Cleaner15 140−2536−06 1 *Seal, Air Cleaner Spacer16 856−0008 1 Washer, EIT Lock (5/16”)17 Strap, Bond

337−2312 1 KY Spec B−H337−3467 1 KY Begin Spec J and KYD

18 823−0007−02 1 Screw, Pan Head ThreadForming (M8 x 1.25 x 25mm)

19 518−0649 1 Clip, Push−On (Gasoline Units)20 153−0664 1 Element, Thermostat (Gasoline

Units)21 98−6769 1 *Label, Air Cleaner

* − Parts Included in Air Filter Kit


KY/ KYD33

Oil Base(KY Spec A)

1

2

3

9

8

7

6

5

4

10


1 102−1411 1 Base, Oil2 102−1412 1 Gasket, Oil Base3 815−0780 10 Screw, Hex Washer Head

(M8 x 1.25 x 35mm)4 502−0153 1 Plug, Hex Head Drain (1/4”)5 509−0282−02 1 O’Ring

6 868−0013 1 Nut, Jam (7/8−14)7 123−1944−01 1 Tube, Oil Fill8 509−0142 1 O’Ring9 123−1953 1 Indicator, Oil (Includes O’Ring)

10 308−1059 1 Switch, Oil Level (S2)


KY/ KYD34

Oil Base(KY Begin Spec B and KYD)

89

1

34

5

6

2

7


1 815−0780 10 Screw, Hex Head Cap(M8 x 1.25 x 35mm)

2 502−0806 1 Elbow, Male (Spec 11320)3 502−0153 1 Plug, Drain (1/4−14 NPT)

(All Specs Except 11320)4 505−1492−02 1 Plug, Drain (3/4−14 NPT

5 509−0307 1 O’Ring6 123−2015 1 Indicator, Oil (Includes O’Ring)7 308−1059 1 Switch, Oil Level (S2)

(KY Spec B−K Only)8 102−1444 1 Base, Oil9 102−1412 1 Gasket, Oil Base


KY/ KYD35

Exhaust(KY Spec A)

1

2

3

4

5

78

9

6


1 155−2683−02 1 Bracket, Muffler2 823−0007−01 2 Screw, Torx Pan Head

(M8 x 1.25 x 20mm)3 870−0236 1 Nut, Hex (#10−32)4 821−2046 1 Screw, Locking Flange

(M8 x 1.25 x 20mm)

5 155−2678 1 Muffler6 503−1533 1 Hose, Preheat (Gasoline)7 154−2816 1 Gasket, Exhaust8 520−2216 2 Stud, Exhaust9 870−2055 2 Nut, Locking Flange Hex

(M8 1.25)


KY/ KYD36

Exhaust(KY Begin Spec B)

1

2

3

4

5

6

7

8

9

10

112

8

9

7 4


1 Stud, Exhaust520−2216 2 KY Spec B−H520−2215 2 KY Begin Spec J

2 154−2816 2 Gasket, Exhaust3 154−2975 1 Manifold, Exhaust (Includes

Tube)4 870−2193−04 4 Nut, Torque Hex (M8)5 402−0675 2 Isolator, Bottom Muffler

6 155−2783 1 Muffler7 402−0678 2 Isolator, Top Muffler8 526−0011 4 Washer, Flat (#10)9 823−1006−06 4 Screw, Pan Head Machine

(M5 x .8 x 20mm)10 503−1533−03 1 Hose, PreHeat11 800−2057 2 Screw


KY/ KYD37

Exhaust(KYD)

1

2

89

10

11

3

7

6

5

4

3

4

5

7

7

12


541−0916 1 Kit, Muffler (IncludesParts Marked *)

1 155−4046 1 *Muffler2 154−2816 1 *Gasket, Exhaust Muffler3 508−1194 4 *Grommet4 155−4084 4 *Spacer, Muffler (Isolator)5 526−0113 4 *Washer, Flat6 526−0115 2 *Washer, Flat (5/16”)7 800−0026 6 *Screw, Hex Head

(5/16−18NC x 3/4”)

8 155−4063 1 Pipe, Exhaust9 154−2816 1 Gasket, Exhaust Manifold

10 503−1533−03 1 Hose, Preheat (3”)11 870−0557 2 Nut, Hex Flange (M8 X 1.25mm)12 520−2215 2 Stud, Exhaust

* − Parts Included in Muffler Kit.


KY/ KYD38

KY Exhaust Kits

ExhaustTube

ElbowAdapter

Tailpipe

2

3

5 7

89

10

11

1213

14

3 3

14

6

&

7

1315


1 155−2850 1 Kit, Exhaust Tube (IncludesAdapter and Clamp)

2 155−2856 1 Adapter, Exhaust3 155−1256 1 *~Clamp4 155−2847 1 Kit, Exhaust Elbow Adapter

(Includes Exhaust Elbow andClamp)

5 155−2843 1 Elbow, Exhaust6 Kit, Exhaust Tailpipe

155−2845 1 540mm Tube (Includes PartsMarked *)

155−3263 1 559mm Tube (Includes PartsMarked ~)

7 Tube, Exhaust155−2844 1 * 540mm155−2844−01 1 ~ 559mm

8 155−2860 1 *~Insulator, Exhaust9 155−2861 2 *~Clamp, Exhaust

10 800−0031 2 *~Screw, Hex Head Cap5/16−18 x 1.5

11 155−2859 3 *~Backplate, Exhaust12 800−0026 1 *~Screw−Hex Head Cap

5/16−18 x .7513 862−0015 2 *~Nut, Hex 5/1614 155−2174 1 Hanger, Exhaust 1.5” O.D.15 155−2449 1 Resonator, Exhaust


KY/ KYD39

“Blank Page”


KY/ KYD40

Fuel Tank Kit

12

3

4

5

6

7

8

Obsolete


415−0584 1 Kit, Fuel Tank (Obsolete Kit OnlyComponents Available)

1 415−0511 1 Tank, Fuel (6 Gallon)2 505−0007 1 Bushing, Reducer (1/4” x 1/8”) 3 504−0169 1 Valve, Shutoff (1/8”)4 502−0395 1 Connector, Barbed Hose

(1/8”)

5 503−0708 1 Hose, Fuel (1/4” ID x 14”)6 503−0731 4 Clamp, Hose7 502−0397 1 Coupling, Quick Disconnect

Female8 502−0398 1 Coupling, Quick Disconnect

Male


KY/ KYD41

Enclosure Base(KY Spec A)

12

34

5

6

7

8

7

9

10

11

12

13

1415

16

17

18

1920

2122

23

24

25

26

27

15

5

6

28


1 405−4306 1 Insulation, Exhaust2 402−0640 3 Isolator, Mounting3 331−0041 1 Nut, Lock4 405−4305−01 1 Base, Enclosure5 868−0002 2 Nut, Hex (5/16−24)6 Washer, Spring Lock (5/16”)

850−0045 2 60 Hz850−0045 4 50 Hz

7 823−1002−01 9 Screw, Torx Pan Head(M6 x 1 x 12mm)

8 307−2586 1 Relay, Start Solenoid (K1)9 809−0017 4 Screw, Round Head Steel

(#6 x 5/16”)10 319−1279−01 1 Bracket, Control11 300−4155 1 Board, PC12 332−0942 2 Tie, Cable13 508−0315 1 Grommet, Enclosure Base14 331−0521 1 Elbow, Conduit15 856−0008 4 Washer, EIT Lock (5/16”)

16 862−0015 2 Nut, Hex (5/16−1817 541−0540 3 Screw, Isolator Mounting

(Includes Washer)18 402−0641 3 Isolator, Snubber19 816−0101 1 Bolt, Carriage

(5/16−18 x 1−1/4”)20 155−2677−01 1 Gasket, Resonator21 155−2675 1 Adapter, Resonator22 155−2715 1 Clamp, Exhaust (1−3/4”)23 Elbow, Exhaust

155−2676 1 45° Angle155−2682 1 90° Angle

24 800−0730 1 Screw, Cap − Hex Head(5/16−18 x 1”)

25 405−4755−02 1 Edging, Base Pan (1675mm)26 508−1083−01 1 Edging, Base Pan (683mm))27 155−2644−02 1 Shield, Heat28 526−0029 3 Washer


KY/ KYD42

Enclosure Base(KY Begin Spec B)

1

20

21

2

19

17

3

13

8

18

11

10

9

12

2322

24

2531

32

33

321

3

10

8

8

24

233

33

3

12

13

9

9

34

35

35

4

14

15

16

33

3

29

28

2523

24

24

23

26

27

30

3

56

7

36


KY/ KYD43

Enclosure Base(KY Begin Spec B)


1 Base, EnclosureGasoline

405−4890−02 1 Spec B−D405−5336−02 1 Spec E405−5811−02 1 Begin Spec F

LP405−4890−02 1 Spec B, C405−5336−02 1 Spec D, E405−5811−01 1 Begin Spec F

2 508−0315 1 Grommet, Enclosure Base3 823−1002−03 14 Screw, Pan Head Torx

Machine (M6 x 1 x 10mm)4 331−0539−02 1 Clamp, Conduit (Not Included

With Spec 11580 or 11320)5 331−0115 1 Connector, Straight (1/2” Pipe

Thread) (Spec 11580)6 331−0255 1 Conduit (1/2” x 36”)

(Spec 11580)7 Bushing

508−0208 1 Snap (Begin Spec F ExceptSpec 11580 G & H)

331−0545 1 Armor (Spec 11580 G& H only)

8 402−0665 4 Isolator, Snubber (GasolineSpec B−D; LP Spec B, C)

9 402−0686−02 4 Tube, Spacer (GasolineSpec B−D; LP Spec B, C)

10 856−0008 4 Washer, EIT Lock (5/16”)11 862−0015 2 Nut, Hex (5/16−18)12 526−0014 4 Washer, Flat (7/16”) (Gasoline

Spec B−D; LP Spec B, C)13 Screw, Hex Head Thread

Forming (M10 x 1.5 x 70mm)Gasoline

815−0842−05 4 Spec B−D (Hex Head)815−0874−01 4 Begin Spec E (Socket

Head)LP

815−0842−05 4 Spec B, C815−0874−01 4 Begin Spec D

14 402−0641 2 Isolator, Snubber (Gasoline Begin Spec E; LP BeginSpec D)

15 526−0032 2 Washer, Flat (Gasoline Spec E;LP Spec D)

16 Screw, Isolator

541−0540 2 Spec D/E−H (IncludesWasher) (Gasoline Spec E;LP Spec D)

815−0785 2 Begin Spec J17 Cover, Drain

Gasoline405−4964−02 1 Spec B−D102−1456−02 1 Begin Spec E

LP405−4964−02 1 Spec B, C102−1456−02 1 Begin Spec D

18 800−0030 1 Bolt, Carriage(5/16−18 x 1−1/4”)

19 508−1093−01 1 Edging (2388mm)20 402−0664−02 2 Isolator, Engine End21 402−0664−01 2 Isolator, Generator End22 815−0943−02 1 Screw, Torx Pan Head (Begin

Spec J)23 868−0002 2 Nut, Hex (5/16−24)24 850−0045 2 Washer, Spring Lock (5/16”)25 307−2586 1 Relay, Start Solenoid (K1)26 Board, PC

300−4320 1 Spec B−E300−4923 1 Spec F−H300−5046 1 Begin Spec J

27 Bracket, Control 319−2152−03 1 Spec B−H319−3811−02 1 Begin Spec J

28 809−0017 4 Screw, Round Head Steel(#6 x 5/16”) (60Hz, 120V,Gasoline Units) (Spec B−H)

29 Regulator, Voltage (VR1)(Spec B−H) (60Hz, 120V,Gasoline Units)

305−0851 1 60 Hz305−0866 1 50 Hz

30 823−1002−04 1 Screw, Torx Pan Head (SpecB−H) (M6 x 14mm)

31 508−1091 1 Seal, Barrier Edge32 405−4892−02 1 Barrier, Exhaust33 870−2054 2 Nut, Flange Lock (M6 x 1)34 405−4895 1 Insulation, Exhaust Barrier35 518−0581 4 Nut, Push−On36 332−3108 1 Terminal, Ground


KY/ KYD44

Enclosure Base(KYD)

1

2

34

6

89

13

12

11 10

7

3

4

11

22

21

21

20

20

19 18

17

16

15

14

8

4

4

6

7

5

4


KY/ KYD45

Enclosure Base(KYD)


1 403−5029−02 1 Base, Enclosure2 508−0315 1 Grommet, Enclosure Base3 815−0874−01 4 Screw, SKT TH Head Torx4 823−1002−03 10 Screw, Pan Head Torx

(M6 x 1 x 10mm)5 331−0539−02 1 Clamp, Conduit6 815−0785 2 Screw, Isolated Mounting7 402−0641 2 Isolator, Snubber8 856−0008 3 Washer, EIT Locking (5/16”)9 862−0015 1 Nut, Hex (5/16−18 UNC)

10 405−7661 1 Shield, Exhaust Insulation11 508−0333 4 Edging12 402−0664−02 2 Isolator, Mount

13 402−0664−01 2 Isolator, Mount14 800−0030 1 Screw, Hex Head

(5/16−18 NC x 1.25)15 508−0208 1 Bushing, Snap16 337−3467 1 Strap, Bond17 327−1413 1 PCB, Control18 319−3811−02 1 Bracket, Control Mounting19 815−0943−02 1 Screw, Hex Washer Head

Thread Forming (1/4−20 x .5”)20 868−0002 2 Nut, Hex Jam (5/16−24UNC)21 850−0045 2 Washer, Split Locking (5/16”) 22 307−2586 1 Relay, Start Solenoid


KY/ KYD46

“Blank Page”


KY/ KYD47

Generator Enclosure(KY Spec A)

1

2

3

4

5

6

7 8

9

10

11

12

6

12


1 405−4524 1 Cover Assy, Enclosure (Includes Parts Marked *)

2 518−0623 6 *Clip, Christmas Tree3 508−0315 1 *Grommet, Remote4 405−4308 1 *Insulation, Inlet5 526−0394 6 *Washer, Flat (Special)6 823−0010−01 5 Screw, Shoulder Torx

(M6 x 14mm)7 405−4307−02 1 Insulation, Upper Exhaust Baffle8 405−5154 1 *Panel, Service (Includes

Latches, Insulation, Label,Gasket and Washers)

9 406−0737−02 2 Pawl, Latch (Early Spec A)10 406−0739 2 Latch, Service Panel (Early

Spec A)11 406−0779 2 Latch Assy, Service Panel

(Later Spec A)12 870−2198 2 Nut, Hex (M22 x 1.5)

* − Parts Included in Enclosure Cover.


KY/ KYD48

Generator Enclosure(KY Begin Spec B and KYD)

,7 8 9,

1

5

2

3

11

13 17

21

18

20

1619

1014

6

17

22

15

13

13

12

2 6~

7

11

4


KY/ KYD49

Generator Enclosure(KY Begin Spec B and KYD)


541−0556−01 1 Kit, Enclosure Cover Includes(KY Enclosure Cover Assy.)

1 Cover Assy, Enclosure(Includes Parts Marked *)

405−4954 1 KY Spec B−E405−5826−01 1 KY Spec F−H405−6383−01 1 KY Begin Spec J405−7552 1 KYD

2 *Grommet508−0315 1 KY Spec B−E508−1116 1 KY Begin Spec F and KYD

3 818−0226−02 2 *Rivet4 *Insulation, Cover

405−4894 1 KY Begin Spec B405−7662 1 KYD

5 518−0581 2 *Nut, Push−On6 *Panel Assy, Service

(Includes Parts Marked +)405−4956 1 KY B−H (Obsolete)405−6384−01 1 KY Begin Spec J405−6384−03 1 KYD

7 405−4958 1 +Insulation, Door8 526−0394 3 +Washer, Flat (Special)9 405−4311−01 1 +Gasket, Service Panel

(250mm)10 870−2198 2 +Nut, Hex (M22 x 1.5)11 406−0779 2 +Latch Assy, Service Panel

(Includes Pawl and Latch)12 98−6806 1 Label, Charger

13 870−2062 4 Nut, Lock (M5 x .8) (50Hz,100V−60Hz)

14 856−0003 1 Washer, EIT (#10) (50Hz,100V−60Hz)

15 332−3292 1 Terminal, Spade (50Hz,100V−60Hz

16 800−2012 2 Screw, Hex Head Cap(M5 x .8 x 30mm) (50 Hz,100V−60Hz)

17 526−0009 3 Washer, Flat (M5) (50 Hz,100V−60Hz)

18 405−4967−03 1 Bracket, Inlet Insulation(60 Hz) (Spec B−H)

19 305−0784 1 Charger, Battery (50 Hz,100V−60Hz)

20 405−4966 1 Insulation, Inlet (60 Hz)(Spec B−H)

21 823−1002−01 3 Screw, Torx Pan Head(M6 x 1 x 12mm) (60 Hz)(Spec B−H)

22 823−0010−01 4 Screw, Torx Shoulder (M6)

* − Included in Enclosure Cover Assy.+ − Included in Service Panel Assy.


KY/ KYD50

Underfloor Mounting Kit(KY Begin Spec B)

13

4

8

9

5 6

10

2

7

1

56

6

7


403−3670 1 Kit, Underfloor Mounting1 403−3672 2 Panel, Underfloor2 821−0014 4 Screw, Hex Head Lock Flange

(5/16−18 x .5”)3 403−3396−02 1 Panel, Back4 508−0315 1 Grommet, Remote5 800−0048 8 Screw, Hex Head Cap

(3/8−16 x .75”)

6 526−0174 12 Washer, Flat (3/8” Hardened)7 403−3669−02 2 Rail, Underfloor8 800−0026 6 Screw, Hex Head Cap

(5/16−18 x .75”)9 526−0122 6 Washer, Flat (5/16” Hardened)

10 870−0513−02 4 Nut, Hex Flange Lock (5/16−1)


KY/ KYD51

Underfloor Mounting Kit(KYD)

1

2

3

5

4

6

7

8

10

9

5

6

73

10

2

1


541−0938 1 Kit, Mounting (Underfloor)1 403−5135−02 2 Rail, Mounting2 403−3672 2 Panel, Under Floor3 526−0174 8 Washer, Flat4 403−5136−02 1 Mount, Generator5 526−0122 4 Washer, Flat (5/16”)6 800−0026 4 Screw, Hex Head Cap

(5/16−18 x .75”)

7 800−0048 8 Screw, Hex Head Cap(5/8−16 x .75”)

8 508−0315 1 Grommet, Remote9 870−0513−02 4 Nut, Hex Flanged (5/16”)

10 821−0014 4 Screw, Locking Head(5/16−18 x 1/2”)


KY/ KYD52

Underfloor Mounting Kit(KY Spec A)

1

2

3

4

5

6

7

8 15

8

6

76

7

6

7


403−3608 1 Kit, Underfloor Mounting(Replaced by 403−3670)

1 403−3579−02 2 Panel, Side2 403−3580−02 2 Brace, Back3 403−3581−03 1 Rail, Bottom (w/o Weldnuts)4 403−3581−04 1 Rail, Bottom (w/o Weldnuts)

5 526−0174 16 Washer, Flat (3/8”)6 800−0026 6 Screw, Hex Head Cap

(5/16−18 x 3/4”)7 526−0122 6 Washer, Flat (5/16”)8 800−0049 12 Screw, Hex Head Cap

(3/8−16 x .88”)


KY/ KYD53

KY Underfloor Housing/Base Kit

3

4

5

6

7

8

9

14

10

1 1311

12

2

12

14

15

16

16

2

1112


1 405−4241 1 Kit, Housing (Includes PartsMarked +)

2 405−4662 1 +Panel, Housing (Rear)3 405−4663 1 +Panel, Housing (LH)4 405−4237 1 +Panel, Housing (RH)5 405−4668−01 1 +Cover, Panel6 508−0071 3 +Grommet, Rubber (.62 Id)7 508−0055 1 +Grommet, Rubber (1.50 Id)8 813−0098 1 +Screw, RH (#10−32 X.375)9 856−0008 2 +Washer, EIT Lk (5/16)

10 850−0030 1 +Washer, Lock (#10)11 800−0026 16 +Screw, Hex Head Cap

(5/16−18 X .75)

12 526−0122 22 +Washer, Flat (5/16”)13 403−3630 1 Kit, Underfloor Base (Includes

Parts Marked *)14 403−3631−02 1 *Base, Underfloor15 800−0026 14 *Screw, Hex Head Cap

(5/16−18 X .75)16 526−0122 22 +Washer, Flat (5/16 )

* − Parts Included in Base Kit.+ − Parts Included in Housing Kit.


KY/ KYD54

Generator/Control(KY Spec A)

22

12

3

4

5

6

7

8910

11

1215

17

18

19

21

20

23

24

25 26

27

28

29

31

32 30

3334

35 3637

3839

16

4

32

40

13 14, ,


KY/ KYD55

Generator/Control(KY Spec A)


1 870−2054 1 Nut, Locking Flange (M6 x 1) (LP)

2 145−0619 1 Shield, Carburetor (Gasoline)3 319−1738−02 1 Shield, Control (LP)4 823−0009−01 5 Screw, Torx Pan Head

(M6 x 1 x 14mm)5 815−0694 2 Screw, Slotted w/ET

(#6−32 x 1/4”)6 308−0969 1 Bezel7 Panel, Control

319−1412 1 60 Hz319−1554−02 1 50 Hz

8 517−0133 1 Plug, Hole (50 Hz)9 303−0303 1 Potentiometer Assy (R5)

(50 Hz) (Includes Lead,Bracket and Potentiometer)

10 303−0275 1 Potentiometer (R5)(50 Hz)11 Breaker, Circuit (CB1)

320−1323 1 60 Hz (30 Amp)320−1780−01 1 50 Hz (15 Amp)

12 166−0784 Coil Assy, Ignition (IncludesSpark Plug Terminal and Boot)

13 167−0267 1 Terminal, Spark Plug14 167−0265 1 Boot, Spark Plug15 823−0002−04 2 Screw, Torx Pan Head

(M4 x .7 x 12mm)16 823−0007−02 4 Screw, Torx Pan Head

(M8 x 1.25 x 25mm)17 220−4416 1 Housing, Stator18 Stator, Generator

220−4485−01 1 60 Hz220−4485−03 1 50 Hz

19 201−3538 1 Rotor Assy (Includes Bearingand Collector Ring)

20 515−0289 1 Key, Fan Hub21 204−0141 1 Ring, Collector22 510−0157 1 Bearing, Rotor23 509−0285 1 O’Ring24 815−0787 2 Screw, Torx Socket Head

(M6 x 1 x 70mm)25 134−4918 1 Housing, Scroll26 205−0199 1 Wheel Assy, Blower27 815−0778 1 Bolt, Rotor Thru (3/8−24 x 9.5”)28 526−0392 1 Washer, Fan Hub29 823−0003−03 3 Screw, Torx Pan Head

(M6 x 1 x 20mm)30 1 Endbell Assy (See Separate

Page for Components)31 750−1006 2 Nut, Hex (M8)32 740−1006 4 Washer, Flat (M8)33 191−1798 1 Starter (B1) (See Separate

Page for Components)34 720−1038 2 Screw, Hex Head Cap

(M8 x 30mm)35 226−4297 1 Cable, Starter36 850−0040 1 Washer, Lock−Spring (1/4”)37 862−0001 1 Nut, Hex (1/4−20)38 823−0008 1 Screw, Pan Head Torx

(M4 x .7 x 60mm)39 304−0796 2 Washer, Center (M4)40 870−0236 1 Nut, Hex (#10−32)


KY/ KYD56

Generator(KY Begin Spec B and KYD)

16

15

17

18

19

1

234

5

8

7

9

13

10

14

12

6

12

13

20

10

11

11


KY/ KYD57

Generator(KY Begin Spec B and KYD)


1 Rotor Assy, (Includes Bearing)60 Hz

201−3538 1 Spec B−H201−3539−01 1 Begin Spec J KY

Spec B KYD50 Hz

Gasoline201−3538 1 Spec B−D201−3539 1 Begin Spec E

LP201−3538 1 Spec B−C201−3539 1 Begin Spec D

2 510−0157 1 Bearing, Rotor3 204−0141 1 Ring, Collector4 515−0289 1 Key, Hub5 509−0285 1 O’Ring 6 526−0392 1 Washer, Fan Hub7 815−0778 1 Bolt, Rotor Thru

(3/8−24 x 9−1/2”)8 Wheel Assy, Blower

(Includes Magnet)205−0199−S0 1 Spec B−H205−0263 1 Begin Spec J

9 Stator, Generator60 Hz

Spec B−H220−4485−S5 1 120V220−4485−04 1 100V

Begin Spec J KYSpec B KYD

220−4586−01 1 120V220−4586−02 1 100V

50 HzGasoline

220−4485−S3 1 Spec B−D220−4490−S1 1 Spec E−H220−4586−11 1 Begin Spec J KY

Spec B KYDLP

220−4485−S3 1 Spec B−C220−4490−S1 1 Spec D−H220−4586−11 1 Begin Spec J

10 Clamp (50Hz)232−3881 2 Spec B−H (Angled)232−4030 2 Begin Spec J (Flat)

11 526−0018 2 Washer, Flat (60Hz) (BeginSpec J)

12 Screw, Torx Socket Head815−0787 2 60 Hz (M6 x 1 x 70mm)815−0936 2 50 Hz (M6 x 1 x 100mm)

Begin Spec B13 815−0829−05 4 Screw, Pan Head − Torx

Thread Forming(M8 x 1.25 x 25mm)

14 Housing, Stator60 Hz

Begin Spec B KYD220−4572−01 1 Gasoline Units220−4572−02 1 LP Units

50 Hz220−4572−03 1 Begin Spec B

15 315−0735−03 1 Bracket, Transformer(50 Hz,100v−60Hz)(Spec B−H)

16 518−0533 1 Clip(50 Hz,100v−60Hz)(Spec B−H)

17 823−0003−06 1 Screw, Torx Pan HeadThread Forming(50 Hz,100v−60Hz)(Spec B−H)(M6 x 1 x 12mm)

18 815−0829−04 1 Screw, Thread Hex FlangeForming (M8 x 1.25 x 16mm)(Spec B−H) (50 Hz,100V−60Hz)

19 315−0736 1 Transformer, Voltage (T1)(Spec B−H) (50 Hz,100V−60Hz)

20 823−1002−01 2 Screw, Pan Head Torx Machine (M6 x 1 x 12mm)(Spec B−H) (50 Hz,100V−60Hz)

When a Rotor is ordered for KY Spec A or B prior to Serial #H943219685 then use a 201−3538−S0 Rotor and one of the FollowingStators unless it has already been replaced:

60Hz − Spec A, Order 220−4485−0160Hz − Spec B Order 220−4485−0550Hz − Spec A or B Order 220−4485−03.


KY/ KYD58

Control(KY Spec B−H)

, ,

,

1

2 3

4

5 7

6

8

9

10

11 12 1314

15

16

1718

15

10

19


1 Breaker, Circuit (CB1)60 Hz

320−1323 1 30A (120V Sets)320−1780−02 1 20A (100V Sets)

50 Hz320−1780−01 1 15A320−1780−03 1 17A320−1780−02 1 20A

2 303−0308−01 1 Potentiometer Assy (R5)(50 Hz and 100V/60Hz)(Includes Lead, Bracket andPotentiometer)

3 303−0275 1 Potentiometer (R5) (50 Hz and100V/60Hz)

4 Panel, Control319−2176−03 1 60 Hz319−2213−03 1 50 Hz

5 517−0133 1 Plug, Hole (50 Hz Only)6 308−0852 1 Switch, Start/Stop (S1)7 Screw, Cross Pan Head

Recessed w/ET (#6−32 x 1/4”)60 Hz

815−0549 2 120815−0549 4 100V815−0549 4 50 Hz

8 853−0013 1 Washer, ET Lock (1/4”)9 823−0003−06 1 Screw, Torx Pan Head

Thread Forming60 Hz (M6 x 1 x 12mm)

10 823−0002−04 2 Screw, Torx Pan Head(M4 x .7 x 12mm)

11 166−0818 1 Coil Assy, Ignition (T1−Ign)(Includes Terminal and Boot)

12 167−0267 1 Terminal, Spark Plug13 167−1627 1 Boot, Spark Plug14 823−0003−01 2 Screw, Torx Pan Head

(M6 x 1 x 10mm)15 526−0018 2 Washer, Flat (1/4”)16 145−0689 1 Shield, Carburetor17 823−1002−03 1 Screw, Pan Head Torx

(M6 x 1 x 10mm)18 526−0018 1 Washer, Flat (1/4”)19 Harness, AC Output

338−2909 1 60 Hz338−3049 1 50 Hz


KY/ KYD59

Control Panel(KY Begin Spec J and KYD)

3

107

56

14

12

11

13

9

18

2

4

1

15

9

10

10


1 526−0018 1 Washer, Flat (1/4”)2 815−0578 1 Screw, Pan Head Torx

(M6 x 1 x 10mm)3 315−0736 1 Transformer, Voltage (T1)

(100V, 230V)4 870−2054 2 Nut, Lock Flange (100V, 230V)5 303−0332 1 Potentiometer Assy (R5)

(100V, 230V) (Includes Lead,Bracket and Potentiometer)

6 303−0331 1 Potentiometer (R5) (100V,230V)

7 Breaker, Circuit (CB1)320−1780−03 1 17A (Spec 26119, 33742)320−1780−02 1 20A (Spec 11429, 65697,

11572)320−1323 1 30A (Spec 11580,

26100, 26120)8 145−0689 1 Shield, Carburetor9 823−0003−02 3 Screw, Torx Pan Head

(M6 x 1 x 14mm)

10 Washer, ET Lock (1/4”)853−0013 2 (120V, 60Hz)853−0013 3 (100V, 230V)

11 308−1038 1 Switch, Start/Stop (S1)12 Screw, Cross Pan Head

Recessed w/ET (#6−32 x 1/4”)815−0549 2 120V815−0549 4 100V, 230V

13 823−1002−04 2 Screw, Torx Pan Head(M6 x 14mm) (100V, 230V)

14 319−3844−02 1 Panel, Control15 Harness, AC Output

338−3814 1 3−wire (Spec 11572,11580, 26100, 26120)

338−3815 1 4−wire (Spec 11429, 26119,33742, 65697)

16 Label, Control98−7634−01 1 17 Amp, 2 Pole98−7634−02 1 20 Amp, 2 Pole98−7634−03 1 30 Amp, 1 Pole


KY/ KYD60

Generator Harness(KY Spec A)

1

2

3

4

5

6

7

89

11

10


Harness, Generator338−2568−01 1 60 Hz338−2568−02 1 50Hz

1 305−0935 1 Rectifier, Bridge (CR1)2 304−0794 1 Resistor (R1)3 332−0942 13 Tie, Cable4 332−3108 1 Terminal, Ground

5 321−0312−01 1 Fuse (5 Ampere)(F1)6 308−0968 1 Switch, Start/Stop (S1)7 323−1314 1 Connector, Plug (12 Pin)(P4)8 323−1252 1 Connector, Plug (15 Pin)(P1)9 323−1200 21 Pin, Contact

10 323−1527−01 1 Connector, Plug (P6)11 323−1527−02 1 Connector, Plug (P5)


KY/ KYD61

Generator Harness(KY Spec B−F)

7 8

3

5

4

1

2

10

9

11

6,


Harness, Generator60 Hz

Gasoline338−3022−01 1 120 Volt (Includes

Parts Marked *)100Volt

338−3123−01 1 Isolated Neutral(Includes PartsMarked * and +)

338−3379−01 1 Grounded Neutral(Includes PartsMarked * and �)

338−3022−02 1 LP (Includes PartsMarked *)

50 Hz (Includes PartsMarked * and ♦

338−3023−01 1 Gasoline338−3023−02 1 LP

1 321−0312−02 1 *Fuse Assy (F1) (Includes5A Fuse)

2 321−0307−03 1 *Fuse, 5A (F1)3 323−1314 1 *Connector, Plug (12 Pin)(P4)4 323−1199 12 *Pin,Contact5 323−1253 1 *Cap, Circuit (15 Pin)(J1)6 *Socket, Contact

323−1200 9 120V, 220V323−1200 7 100V

7 323−1527−01 1 *Connector, Plug (P6)8 323−1527−02 1 *Connector, Plug (P5)9 304−0805−03 1 �+Resistor, Fixed (10K ohm)

(P4−4 to P4−5)10 338−2807 1 ♦+Harness, Splitter (Includes

Boot)11 167−1636 1 Boot, Insulating

* − Parts Included with all Harnesses+ − Parts Included in 100V, Isolated Neutral Harness� − Part Included in 100V, Grounded Neutral Harness♦ − Part Included in 50Hz Harnesses.


KY/ KYD62

Generator Harness(KY Spec G−H)

1

2

34

5

67 8

9

10

11

,


Harness, Generator60 Hz

Gasoline338−3639−02 1 120 Volt (Includes

Parts Marked *)100 Volt

338−3641−01 1 Isolated Neutral(Includes PartsMarked * and +)

338−3638−01 1 Grounded Neutral(Includes PartsMarked * and �)

338−3639−02 1 LP (Includes PartsMarked *)

50 HzGasoline

338−3640−01 1 230 Volt (IncludesParts Marked *and ♦)

338−3661−01 1 100 Volt (IncludesParts Marked *and +)

LP338−3640−02 1 230V (Includes

Parts Marked *and ♦)

338−3661−02 1 100 Volt (IncludesParts Marked *and +)

1 321−0312−02 1 *Fuse Assy (F1) (Includes5 Amp Fuse)

2 321−0307−03 1 *Fuse, 5 Amp (F1)3 323−1314 1 Connector, Plug (12 Pin)(P4)4 323−1199 12 *Pin,Contact5 323−1253 1 *Cap, Circuit (15 Pin)(J1)6 *Socket, Contact

323−1200 9 120V, 220V323−1200 7 100V

7 323−1527−01 1 *Connector, Plug (P6)8 323−1527−02 1 *Connector, Plug (P5)9 304−0805−03 1 �+Resistor, Fixed (P4−4 to P4−5)

(10K ohm, 100V Only)10 338−2807 1 ♦+Harness Assy, Splitter

(Isolated Neutral Harnessesonly. Includes Boot)

11 167−1636 1 Boot, Insulating

* − Parts Included with all Harnesses+ − Parts Included with 100V, Isolated Neutral Harness.� − Part Included in 100V, Grounded Neutral Harness♦ − Part Included in 50Hz Harness.


KY/ KYD63

Engine Harness(KY Begin Spec J and KYD)

1 2

3

4

7

11

9

10

12

5

8

6

P1

J2

P5, P6

,

P9


Harness, Engine60 Hz

Gasoline338−3813 1 100 Volt338−3812 1 120 Volt

LP338−3813 1 50 Hz

1 323−1527−01 1 Connector, Plug (P6)2 323−1527−02 1 Connector, Plug (P5)3 323−1605−01 1 Connector, Plug (P1) (23 Pin)

4 323−1615 5 Plug, Cavity (P1)5 323−1614−01 AR Socket, Terminal (P1)6 167−1636 1 Boot, Insulating (Not Used

on 338−3812)7 323−1743 1 Connector, Plug (J2)(8 Pin)8 323−1709 7 Terminal, Socket (J2)9 323−1712 1 Plug, Cavity (J2)

10 323−1708 7 Seal, Cable (J2)11 323−1741 1 Housing,

981-0246e ky kyd(7 07) - las motorhomesprinted in u.s.a. 981−0246e (ky spec a−l and kyd spec...

Documents