91200 - v

RAW MATERIAL SPECIFICATION, ALUMINUM Doc No 91200, Rev VU

of 17

REVISION RECORD LTR DESCRIPTION ECO DATE

(YYMMDD) INITIALS

H Add specs SAE AMS 4218H and ASTM E 1417 – 05 to 2.0, References Add part number 91200-A356.0-2663 to Table 9. Add column Inspection Standards to Table 9

N/A 09/03/24 REB

J Add P/N 91200-3003-1757 to Table 6. Clarify para 3 to define that the finished part must meet the Raw Material Spec requirement. N/A 4/30/09 REB

K Add spec SAE AMS-QQ-A-591 to para 2, references. Add PN 91200-360.0-2673 91200-A360.0-2675 91200-380.0-2677 91200-A380.0-2679 91200-383.0-2681 91200-384.0-2683 91200-413.0-2685 91200-A413.0-2687 91200-C443.0-2689 91200-518.0-2691 to Table 9, Castings

N/A 09/05/07 REB

L Added Section 10 and table in section. Changed pages from 11 to 12. Added specs ASTM B 308/B 308M-02, AMS 4037N, AMS 4041Q Added PN 91200-2024-2797, 91200-2024-2705, 91200-2024-2707, 91200-2024-2709, 91200-2024-2711, 91200-2024-2779, 91200-2024-2781, 91200-2024-2783, 91200-2024-2779

N/A 09/06/18 BES

M Add P/N 91200-7075-1621 to Table 6. N/A 09/07/08 KRW

N Added ASTM B 483/B 483M to table 2; Added 91200-3003-1753, 91200-5052-2801, 91200-6063-2447, and 91200-1100-1033 to table 6; Sorted tables 7-9 by part number

N/A 09/07/16 JDG/BES

P Added 91200-2024-2449 and 91200-2024-2451 to Section 6; corrected 91200-7075-1621 material from SAE AMS-QQ-A-250/12 to SAE AMS-QQ-A-250/12

N/A 09/08/28 BES

R Corrected material callout in section 10; Added 91200-7050-2803 and 91200-7050-2805 N/A 09/09/15 BES

T

Activated 91200-3003-1743, 91200-1100-1037, and 91200 and 91200-2024-1735; Added 91200-7068-2807; Reordered materials in Section 7.0 to be sorted by alloy number and temper; corrected thickness on 91200-6061-2559

N/A 09/11/19 BES

U Added 91200-2024-2809 and 91200-7075-2811 N/A 10/01/14 BES

V Added 91200-2024-2785, 91200-2024-2787, 91200-2024-2789, 91200-2024-2791, 91200-2024-2793, 91200-2024-2795, and 91200-FOIL-XXX N/A 10/02/19 PSG

THESE COMMODITIES, TECHNOLOGY, OR SOFTWARE ARE SUBJECT TO THE EXPORT CONTROLS IN

ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S LAW IS PROHIBITED.

RAW MATERIAL SPECIFICATION

DRAWN: R. BIRKETT

DATE: (YYMMDD)

2008/9/26

Fuel & Utility Systems Goodrich Corporation Vergennes, Vermont

ENGINEER: R. BROWN

Signatures on File

ENGINEER: M. MASSIMO

TITLE: ALUMINUM ALLOY

MFG. ENGR. SIZE

A CAGE CODE

89305 DWG NO 91200

RAW MATERIAL SPECIFICATION, ALUMINUM Doc No 91200 Rev. VU

DATA IS SUBJECT TO THE RESTRICTIONS ON THE TITLE PAGE of 17

SCALE: NONE

WT:



1.0

GENERAL:

This specification defines the requirements of aluminum alloy raw material stock and current controlling specifications to be used in fabrication of Goodrich products.

2.0

REFERENCES:

ASTM B 209-07 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

ASTM B 210-04 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

ASTM B 211-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

ASTM B 221-08 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

ASTM B 221-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

ASTM B 241/B 241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

SAE AMS 4025L Aluminum Alloy, Sheet and Plate 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-0) Annealed – UNS A96061

SAE AMS 4026M Aluminum Alloy, Sheet and Plate 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061; -T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Aged – UNS A96061

SAE AMS 4027N Aluminum Alloy, Sheet and Plate 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated – UNS A96061

SAE AMS 4050H Aluminum Alloy, Plate 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged – UNS A97050

SAE AMS 4120R

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu – 1.5Mg – 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351) – UNS A92024

SAE AMS 4150L Aluminum Alloy, Extrusions and Rings 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr – (6061-T6) Solution and Precipitation Heat Treated – UNS A96061

SAE AMS 4260G Aluminum Alloy, Investment Castings 7.0Si – 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated – UNS A03560

SAE AMS 4342E Aluminum Alloy, Extrusions 6.2Zn – 2.3Cu – 2.2Mg – 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged – UNS A97050

SAE AMS-QQ-A-200/10A Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and Wire, Extruded – UNS A96066

SAE AMS-QQ-A-200/11 Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded – UNS A97075

SAE AMS-QQ-A-200/16A Aluminum Alloy, Structural Shapes, Extruded, 6061 – UNS A96061








SAE AMS-QQ-A-200B Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for

SAE AMS-QQ-A-225/1B Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 1100 – UNS A91100

SAE AMS-QQ-A-225/2A Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003 – UNS A93003

SAE AMS-QQ-A-225/4 Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished

SAE AMS-QQ-A-225/5 Aluminum Alloy, 2017, Bar, Rod, and Wire Rolled, Drawn, or Cold Finished – UNS A92017

SAE AMS-QQ-A-225/6A Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished – A92024

SAE AMS-QQ-A-225/7A Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 5052 – UNS A95052

SAE AMS-QQ-A-225/8A Aluminum Alloy 6061, Bar, Rod, and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished – A96061

SAE AMS-QQ-A-225/9 Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished

SAE AMS-QQ-A-250/11A Aluminum Alloy 6061, Plate and Sheet – UNS A96061

SAE AMS-QQ-A-250/12 Aluminum Alloy 7075, Plate and Sheet – A97075

SAE AMS-QQ-A-250/13 ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET

SAE AMS-QQ-A-250/1A Aluminum 1100, Plate and Sheet – UNS A91100

SAE AMS-QQ-A-250/26B Aluminum 7075, Plate and Sheet Alclad 7011 – UNS A97075

SAE AMS-QQ-A-250/29 Aluminum Alloy 2124, Plate – UNS A92124


SAE AMS-QQ-A-250/3 ALUMINUM ALLOY ALCLAD 2014, PLATE AND SHEET


SAE AMS-QQ-A-250/5A Aluminum Alloy Alclad 2024, Plate and Sheet – UNS A82024

SAE AMS-QQ-A-250/8B Aluminum Alloy 5052, Plate and Sheet – UNS A95052

SAE AMS-QQ-A-250A Aluminum and Aluminum Alloy, Plate and Sheet General Specification for



SAE AMS-QQ-A-591 Aluminum Alloy Die Castings

SAE AMS-WW-T-700/1A Tube, Aluminum, Drawn, Seamless, 1100

SAE AMS-WW-T-700/2A Tube, Aluminum, Alloy, Drawn, Seamless, 3003 – UNS A93003

SAE AMS-WW-T-700/3A Tube, Aluminum Alloy, Drawn, Seamless, 2024




SAE AMS-WW-T-700A Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for

SAE AMS 2175 Castings, Classification and Inspection of

SAE AMS 4218H Aluminum Alloy Castings 7.0Si – 0.35Mg (A356.0-T6P) (Formerly T61P Temper) Solution and Precipitation Heat Treated

ASTM E 1417 – 05 Standard Practice for Liquid Penetrant Testing

MMPDS-04 Metallic Materials Properties Development and Standardization

SAE AMS-QQ-A-591 Aluminum Alloy Die Castings

ASTM B 308/B 308M-02 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

SAE AMS 4037N Aluminum Alloy, Sheet and Plate

SAE AMS 4041Q Aluminum Alloy, Sheet and Plate

ASTM B 483/B 483M Aluminum and Aluminum-Alloy Drawn Tube and Pipe

SAE AMS 4331 Aluminum Alloy Extrusions 7.8Zn - 2.6Mg - 2.0Cu - 0.10Zr - (7068-T6511) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

QQ-A-1876 Aluminum Foil

3.0

MATERIAL SPECIFICATION REQUIREMENTS:

The material(s) used in the manufacturing of Simmonds products shall be purchased and fabricated to comply with the raw material part number and corresponding specification(s) listed in this document. Any intermediate operations performed by the product vendor (heat treat, forming, etc) which affect the material properties shall meet the requirements of this Raw



Material Specification. The final product shall be certified to meet the requirements of the applicable raw material part number as specified in this document. The Alternate Specification (if listed) is considered equivalent to the Primary specification.

4.0

MATERIAL DESIGNATION:

The material designation is defined by the following tracking designation system: BASE NUMBER – MATERIAL – INDEX NUMBER The BASE NUMBER for the Aluminum Alloys shall be: 91200. The MATERIAL in this designator is the specific alloy such as 1100, 6061, etc. The INDEX NUMBER is a number from 1001 through 9999, used to create a unique part number. There is no intelligence in the index number.

• Forming Method

• Form • Coating

• Application • Alloy Number

• Temper • Document Number/Revision

5.0

MATERIAL PROPERTIES ENGINEERING REFERENCE:

Refer to applicable material specifications for “S” basis design values and to MMPDS-04 for “A”, “B” basis design values. Note: MMPDS-04 is not a procurement document.

RAW MATERIAL SPECIFICATION, ALUMINUM 91200, Rev. UV

of 17

6.0

“S” BASIS MATERIAL PART NUMBERS:

RMSPart Number Forming Method Form Coating Application Alloy Number Temper

Thickness or

Diameter

Primary Specification Number/Revision

Primary Specification

Status

Alternate Specification Number/Revision

Alt Spec Status

RMS Rev

91200-1100-1023 Not Specified PLATE, SHEET None 1100 F ASTM B 209-07 Active SAE AMS-QQ-A-250/1A Cancelled -

91200-1100-1029 Not Specified PLATE, SHEET None 1100 H14 ASTM B 209-07 Active SAE AMS-QQ-A-250/1A Cancelled -

91200-1100-1855 ROLLED, DRAWN, OR COLD FINISHED BAR, ROD, WIRE None 1100 H14 ASTM B 211-03 Active SAE AMS-QQ-A-225/1B Cancelled D

91200-1100-2571 Extruded, Rolled, Drawn ROD, WIRE None Rivet and Cold-Heading 1100 H14 <= 1.000 ASTM B 316/B 316M – 02 Active D

91200-1100-1033 Not Specified PLATE, SHEET None 1100 H18 ASTM B 209-07 Active N

91200-1100-1037 Not Specified PLATE, SHEET None 1100 H24 ASTM B 209-07 Active T

91200-1100-1043 Not Specified PLATE, SHEET None 1100 O ASTM B 209-07 Active SAE AMS-QQ-A-250/1A Cancelled -

91200-2011-1863 ROLLED, DRAWN, OR COLD FINISHED BAR, ROD, WIRE None 2011 T3 ASTM B 211-03 Active SAE AMS-QQ-A-225/3A Cancelled -

91200-2014-1887 ROLLED, DRAWN, OR COLD FINISHED BAR, ROD, WIRE None 2014 T651 ASTM B 211-03 Active SAE AMS-QQ-A-225/4 Active F

91200-2017-1891 ROLLED, DRAWN, OR COLD FINISHED BAR, ROD, WIRE None 2017 T4 ASTM B 211-03 Active SAE AMS-QQ-A-225/5 Active -

91200-2024-1091 Not Specified PLATE, SHEET None 2024 O ASTM B 209-07 Active SAE AMS-QQ-A-250/4A Active -

91200-2024-1101 Not Specified PLATE, SHEET None 2024 T3 ASTM B 209-07 Active SAE AMS-QQ-A-250/4A Active -

91200-2024-2041 EXTRUDED BAR, ROD, SHAPES, TUBE, WIRE None

not intended for fluid-carrying applications involving pressure.

2024 T3 ASTM B 221-08 (Note 1) Active SAE AMS-QQ-A-200/3 Active -

91200-2024-2797 Not Specified PLATE, SHEET Alclad high strength with good resistance to corrosion 2024 T3 SAE AMS 4041Q Active L




Thickness or

Diameter



Status


Alt Spec Status

RMS Rev

91200-2024-1735 DRAWN, SEAMLESS TUBE None Pressure 2024 T3 ASTM B 210-04 Active T


91200-2024-1899 ROLLED, DRAWN, OR COLD FINISHED BAR, ROD, WIRE None 2024 T351 ASTM B 211-03 Active SAE AMS-QQ-A-225/6A Active -

91200-2024-2809 Not Specified PLATE, SHEET None high strength and no welding is involved 2024 T351 .5 00 thru

1.000 SAE AMS-QQ-A-250/4A Active U



2024 T3510 ASTM B 221-08 (Note 1) Active SAE AMS-QQ-A-200/3 Active E



2024 T3511 ASTM B 221-08 (Note 1) Active SAE AMS-QQ-A-200/3 Active E



91200-2024-2449 Not Specified PLATE, SHEET None high strength and no welding is involved 2024 T4 .010-.020 SAE AMS-QQ-A-250/4A Active SAE AMS-QQ-A-250/4A P

91200-2024-2451 Not Specified PLATE, SHEET None high strength and no welding is involved 2024 T4 .021 thru

.249 SAE AMS-QQ-A-250/4A Active SAE AMS-QQ-A-250/4A P

91200-3003-1743 DRAWN, SEAMLESS TUBE None Pressure 3003 H12 ASTM B 210-04 Active T

91200-3003-1245 Not Specified PLATE, SHEET None 3003 H14 ASTM B 209-07 Active SAE AMS-QQ-A-250/2A Cancelled -

91200-3003-1747 DRAWN, SEAMLESS TUBE None Pressure 3003 H14 ASTM B 210-04 Active -

91200-3003-1753 DRAWN, SEAMLESS TUBE None Pressure 3003 H18 ASTM B 210-04 Active SAE AMS-WW-T-700/2A Cancelled N

91200-3003-1261 Not Specified PLATE, SHEET None 3003 H24 ASTM B 209-07 Active SAE AMS-QQ-A-250/2A Cancelled C




Thickness or

Diameter



Status


Alt Spec Status

RMS Rev

91200-3003-1271 Not Specified PLATE, SHEET None 3003 O ASTM B 209-07 Active SAE AMS-QQ-A-250/2A Cancelled B

91200-3003-1757 DRAWN, SEAMLESS TUBE None Pressure 3003 O ASTM B 210-04 Active SAE AMS-WW-T-700/2A Cancelled J

91200-5052-1429 Not Specified PLATE, SHEET None 5052 H32 ASTM B 209-07 Active SAE AMS-QQ-A-250/8B Non-current -


91200-5052-1433 Not Specified PLATE, SHEET None 5052 H34 ASTM B 209-07 Active SAE AMS-QQ-A-250/8B Non-current -


91200-5052-2801 DRAWN TUBE None 5052 H34 SAE AMS-WW-T-700/4A Non-current N

91200-5052-1435 Not Specified PLATE, SHEET None 5052 H36 ASTM B 209-07 Active SAE AMS-QQ-A-250/8B Non-current C



91200-5052-1439 Not Specified PLATE, SHEET None 5052 O ASTM B 209-07 Active SAE AMS-QQ-A-250/8B Non-current -

91200-5052-1783 DRAWN, SEAMLESS TUBE None Pressure 5052 O ASTM B 210-04 Active -

91200-6061-1583 Not Specified PLATE, SHEET None 6061 O ASTM B 209-07 Active SAE AMS 4025L Active -

91200-6061-1973 ROLLED, DRAWN, OR COLD FINISHED BAR, ROD, WIRE None 6061 O ASTM B 211-03 Active SAE AMS-QQ-A-225/8A Active -

91200-6061-1587 Not Specified PLATE, SHEET None 6061 T4 ASTM B 209-07 Active SAE AMS 4026M Active -




Thickness or

Diameter



Status


Alt Spec Status

RMS Rev

91200-6061-1805 DRAWN, SEAMLESS TUBE None Pressure 6061 T4 ASTM B 210-04 Active -




6061 T4 ASTM B 221-08 (Note 1) Active SAE AMS-QQ-A-200/8 Active A

91200-6061-2525 Not Specified SHEET None 6061 T42 SAE AMS 4026M Active N/A N/A B

91200-6061-1599 Not Specified PLATE, SHEET None 6061 T6 ASTM B 209-07 Active -






91200-6061-2407 EXTRUDED, SEAMLESS TUBE None Pressure 6061 T6 ASTM B 241/B 241M-02 Active D

91200-6061-2527 Not Specified SHEET None 6061 T62 SAE AMS 4026M Active N/A N/A B

91200-6061-1607 Not Specified PLATE, SHEET None 6061 T651 ASTM B 209-07 Active -





91200-6061-2413 EXTRUDED, SEAMLESS TUBE None Pressure 6061 T6511 ASTM B 241/B 241M-02 Active D



6063 T5 ASTM B 221-08 (Note 1) Active SAE AMS-QQ-A-200/9A Cancelled -




Thickness or

Diameter



Status


Alt Spec Status

RMS Rev



6063 T52 ASTM B 221-08 (Note 1) Active SAE AMS-QQ-A-200/9A Cancelled -



6063 T6 ASTM B 221-08 (Note 1) Active SAE AMS-QQ-A-200/9A Cancelled B

91200-6063-2447 DRAWN TUBE None general purpose 6063 T832 ASTM B 483/B 483M - 03 Active N

91200-7050-2805 Not Specified PLATE, SHEET None 7050 T7451 SAE AMS 4050H Active Primary R

91200-7050-2803 EXTRUDED BAR, ROD, SHAPES, TUBE, WIRE None 7050 T74511 SAE AMS 4342E Active Primary R

91200-7068-2807 EXTRUDED BAR, ROD, PROFILES, TUBING None 7068 T6511 SAE AMS 4331 Active T

91200-7075-1611 Not Specified PLATE, SHEET None 7075 F ASTM B 209-07 Active SAE AMS-QQ-A-250/12 Active -

91200-7075-1619 Not Specified PLATE, SHEET None 7075 O ASTM B 209-07 Active SAE AMS-QQ-A-250/12 Active -

91200-7075-1621 Not Specified PLATE, SHEET Alclad 7075 O ASTM B 209-07 Active SAE AMS-QQ-A-250/13 Active M

91200-7075-1627 Not Specified PLATE, SHEET None 7075 T6 ASTM B 209-07 Active SAE AMS-QQ-A-250/12 Active -

91200-7075-1629 Not Specified PLATE, SHEET Alclad 7075 T6 ASTM B 209-07 Active SAE AMS-QQ-A-250/13 Active B










Thickness or

Diameter



Status


Alt Spec Status

RMS Rev











Note 1: Previous revisions listed in Para 2, References, are acceptable.



7.0

“A”,”B” BASIS MATERIAL PART NUMBERS:


Cross Sectional

Area (in^2) Thickness (in) Primary Specification

Number/Revision


Status RMS Rev

91200-2024-2705 Not Specified PLATE, SHEET Alclad 2024 T3 N/A 0.008-0.009 SAE AMS-QQ-A-250/5A Active L 91200-2024-2707 Not Specified PLATE, SHEET Alclad 2024 T3 N/A 0.010-0.062 SAE AMS-QQ-A-250/5A Active L 91200-2024-2709 Not Specified PLATE, SHEET Alclad 2024 T3 N/A 0.063-0.128 SAE AMS-QQ-A-250/5A Active L 91200-2024-2711 Not Specified PLATE, SHEET Alclad 2024 T3 N/A 0.129-0.249 SAE AMS-QQ-A-250/5A Active L 91200-2024-2779 Not Specified PLATE, SHEET None 2024 T3 N/A 0.008-0.009 SAE AMS 4037N Active L 91200-2024-2781 Not Specified PLATE, SHEET None 2024 T3 N/A 0.010-0.128 SAE AMS 4037N Active L 91200-2024-2783 Not Specified PLATE, SHEET None 2024 T3 N/A 0.129-0.249 SAE AMS 4037N Active L 91200-2024-2785 Not Specified PLATE, SHEET None 2024 T351 N/A 0.250-0.499 SAE AMS 4037N Active V 91200-2024-2787 Not Specified PLATE, SHEET None 2024 T351 N/A 0.500-1.000 SAE AMS 4037N Active V 91200-2024-2789 Not Specified PLATE, SHEET None 2024 T351 N/A 1.001-1.500 SAE AMS 4037N Active V 91200-2024-2791 Not Specified PLATE, SHEET None 2024 T351 N/A 1.501-2.000 SAE AMS 4037N Active V 91200-2024-2793 Not Specified PLATE, SHEET None 2024 T351 N/A 2.001-3.000 SAE AMS 4037N Active V 91200-2024-2795 Not Specified PLATE, SHEET None 2024 T351 N/A 3.001-4.000 SAE AMS 4037N Active V 91200-6061-2521 Not Specified SHEET None 6061 T4 N/A 0.010-0.249 SAE AMS-QQ-A-250/11A Cancelled A 91200-6061-2523 Not Specified SHEET None 6061 T4 N/A 0.010-0.249 SAE AMS 4026M Active B 91200-6061-2529 Not Specified PLATE None 6061 T451 N/A 0.250 - 2.000 SAE AMS 4026M Active B 91200-6061-2531 Not Specified PLATE None 6061 T451 N/A 2.001 - 3.000 SAE AMS 4026M Active B 91200-6061-2519 Not Specified SHEET None 6061 T6 N/A 0.010-0.249 SAE AMS-QQ-A-250/11A Cancelled A 91200-6061-2535 Not Specified SHEET None 6061 T6 N/A 0.010-0.249 SAE AMS 4027N Active B 91200-6061-2553 DRAWN, SEAMLESS TUBE None 6061 T6 N/A 0.025 - 0.500 SAE AMS-WW-T-700/6A Non-current B 91200-6061-2559 EXTRUDED BAR, ROD, SHAPES None 6061 T6 <= 32 Up thru ,249 SAE AMS-QQ-A-200/8 Active B 91200-6061-2537 Not Specified SHEET None 6061 T62 N/A 0.010-0.249 SAE AMS 4027N Active B 91200-6061-2511 Not Specified PLATE None 6061 T651 N/A 0.250 - 2.000 SAE AMS-QQ-A-250/11A Cancelled A 91200-6061-2513 Not Specified PLATE None 6061 T651 N/A 2.001 - 3.000 SAE AMS-QQ-A-250/11A Cancelled A 91200-6061-2541 Not Specified PLATE None 6061 T651 N/A 0.250 - 2.000 SAE AMS 4027N Active B 91200-6061-2543 Not Specified PLATE None 6061 T651 N/A 2.001 - 3.000 SAE AMS 4027N Active B 91200-6061-2515 EXTRUDED BAR, ROD, SHAPES None 6061 T6510 <= 32 1.001 - 6.500 SAE AMS-QQ-A-200/8 Active B 91200-6061-2517 EXTRUDED BAR, ROD, SHAPES None 6061 T6511 <= 32 1.001 - 6.500 SAE AMS-QQ-A-200/8 Active A 91200-7075-2811 Not Specified PLATE, SHEET Alclad 7075 O N/A .015 thru .062 SAE AMS-QQ-A-250/13 Active U



8.0

“S” BASIS, INCLUDED IN MMPDS-04, MATERIAL PART NUMBERS:


Cross Sectional

Area (in^2) Thickness (in) Primary Specification

Number/Revision


Status RMS Rev

91200-2024-2779 Not Specified PLATE, SHEET None 2024 T3 N/A 0.008-0.009 SAE AMS 4037N Active L 91200-5052-2549 Not Specified PLATE, SHEET None 5052 O N/A 0.006 - 3.000 SAE AMS 4015L Active B

91200-6061-2557 ROLLED, DRAWN, OR COLD FINISHED BAR, ROD, WIRE None 6061 T6 <= 50 <= 8.000 SAE AMS-QQ-A-225/8A Active B



9.0

CASTINGS, MATERIAL PART NUMBERS:

RMSPart Number Forming Method Alloy Number Temper Casting Class and Casting Grade Inspection Standards Primary Specification Number/Revision


Status


Allowables Basis

(A, B, S)

RMS Rev

91200-356.0-2501 INVESTMENT CASTING 356.0 T6 Casting Class and Casting Grade per AMS 2175 as specified on drawing N/A SAE AMS 4260G Active N/A S G

91200-360.0-2673 DIE CASTING 360.0 N/A Casting Class and Casting Grade per AMS 2175 as specified on drawing N/A SAE AMS-QQ-A-591 Active No S K






91200-A356.0-2663 sand, permanent mold, composite mold, and investment castings

A356.0 T6P Casting Class and Casting Grade per AMS 2175 as specified on drawing

Castings shall be liquid penetrant inspected using a method in

accordance with ASTM E 1417, classification per drawing. Tensile specimens as defined on drawing.

SAE AMS 4218H Active N/A S H

91200-A360.0-2675 DIE CASTING A360.0 N/A Casting Class and Casting Grade per AMS 2175 as specified on drawing N/A SAE AMS-QQ-A-591 Active No S K



91200-C443.0-2689 DIE CASTING C443.0 N/A Casting Class and Casting Grade per AMS 2175 as specified on drawing N/A SAE AMS-QQ-A-591 Active No S K



10.0 STRUCTURAL PROFILES, MATERIAL PART NUMBERS:

Part Number Forming Method - std terminology Form - Std Terminology Coating Application Alloy Number Temper Structural

Profile A (in)

B (in)

Thickness or Diameter (in) Specification Status Primary/Alternate RMS_Active

91200-308.0-2693 HOT EXTRUDING HOT EXTRUDING None Tee shaped profile to make better use of the metal in the cross section and take full advantage of the extrusion process

6061 T6

Tee per Table 13.12 of

Aluminum Standards and data

2006

2 2 0.25 B 308/B 308M – 02 Active Primary L


6061 T6



2006

2.25 2.25 0.25 B 308/B 308M – 02 Active Primary L


6061 T6



2006

2.5 2.5 0.312 B 308/B 308M – 02 Active Primary L


6061 T6



2006



6061 T6



2006


Formatted: Bullets and Numbering



11.0 FOIL PART NUMBERS:

Part Number Material Type Grade Finish Status Specification Rev

91200-FOIL-XXX* Aluminum Foil Type I B Annealed Active QQ-A-1876 V

*XXX defines thickness in thousandths (e.g. 91200-FOIL-003 has a thickness of .003”)

Formatted Table

91200 - v

Documents